Valentin Longchamp fdc8c4adb6 powerpc/corenet: add support for the kmcent2 board
This board is built around Freescale's T1040 SoC.

The peripherals used by this design are:
- DDR3 RAM with SPD support
- parallel NOR Flash as boot medium
- 1 PCIe bus (PCIe1 x1)
- 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
- 4 IFC bus devices:
  - NOR flash
  - NAND flash
  - QRIO reset/power mgmt CPLD
  - BFTIC chassis management CPLD
- 2 I2C buses
- 1 SPI bus
- HDLC bus with the QE's UCC1
- last but not least, the mandatory serial port

The board can be used with the corenet32_smp_defconfig.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2017-01-25 02:38:48 -06:00
..
2013-12-02 14:06:57 +11:00
2010-05-12 07:48:49 -04:00
2007-09-19 21:13:16 -05:00
2008-04-17 01:01:40 -05:00
2014-05-01 08:26:26 +10:00
2016-09-28 14:20:44 +10:00
2009-12-12 22:24:26 -07:00
2014-08-05 15:41:03 +10:00
2015-04-29 17:17:17 -05:00
2016-12-16 09:26:42 -08:00
2015-04-29 17:17:17 -05:00
2014-08-26 09:35:57 +02:00
2007-09-14 01:33:23 +10:00
2007-09-14 01:33:23 +10:00
2009-12-12 22:24:29 -07:00

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter