Florian Fainelli fe26821fa6 net: phy: broadcom: Wire suspend/resume for BCM54810
The BCM54810 PHY can use the standard BMCR Power down suspend, but needs
a custom resume routine which first clear the Power down bit, and then
re-initializes the PHY. While in low-power mode, the PHY only accepts
writes to the BMCR register. The datasheet clearly says it:

Reads or writes to any MII register other than MII Control register
(address 00h) while the device is in the standby power-down mode may
cause unpredictable results.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19 16:36:48 -08:00
..
2020-01-29 18:53:37 -08:00
2020-02-06 06:11:50 +00:00
2020-02-08 14:04:19 -08:00
2020-02-08 14:04:19 -08:00
2020-02-08 14:17:27 -08:00
2020-02-08 14:17:27 -08:00
2020-02-14 10:40:48 +01:00
2020-02-08 14:04:19 -08:00
2020-02-08 13:58:44 -08:00
2020-01-27 13:03:00 -08:00
2020-02-08 14:04:19 -08:00
2020-02-14 13:04:46 +10:00
2020-01-30 08:04:01 -08:00
2020-02-08 14:04:19 -08:00
2020-02-04 07:17:41 +00:00
2020-01-31 14:40:36 -08:00
2020-02-05 17:49:54 +00:00
2020-02-04 13:06:46 +00:00
2020-02-04 07:17:41 +00:00
2020-01-16 10:45:44 -08:00
2020-02-04 07:17:41 +00:00
2020-01-27 13:03:00 -08:00
2020-02-06 06:15:23 +00:00
2020-02-08 14:04:19 -08:00
2020-01-27 13:03:00 -08:00
2020-02-06 14:17:38 +00:00
2020-02-08 13:55:25 -08:00
2020-02-16 18:30:41 -08:00
2020-02-03 14:51:57 +00:00
2020-02-04 07:17:41 +00:00
2020-02-08 17:24:41 -08:00
2020-02-08 14:04:19 -08:00
2020-01-29 18:16:16 -08:00
2020-01-31 11:28:31 -08:00
2020-02-08 14:04:19 -08:00
2020-02-09 16:05:50 -08:00
2020-02-03 22:22:05 +00:00
2020-02-09 16:05:50 -08:00
2020-01-29 10:35:54 -08:00
2020-01-29 10:35:54 -08:00
2020-02-07 12:30:16 -08:00
2020-02-05 17:44:14 +00:00
2020-02-09 16:05:50 -08:00