keremet/mkimage-profiles
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
682b19492d
mkimage-profiles/conf.d/regular.mk

260 lines
11 KiB
Makefile
Raw Normal View History

initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
# regular build/usage images
ifeq (distro,$(IMAGE_CLASS))
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
# common ground (really lowlevel)
regular.mk: use/docs/license This has been requested by Andrey Mitrofanov: http://www.opennet.ru/openforum/vsluhforumID3/107265.html#162 Putting the image license text into its toplevel directory is *very* reasonable as it's much more accessible then.
2016-04-11 20:59:16 +03:00
distro/.regular-bare: distro/.base +net-eth use/kernel/net use/docs/license
regular.mk: introduced regular-rescue This one was just asking to be built for quite a long time; http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs specifically accenting use of smartmontools 6.0 has finally persuaded me to roll out yet another rescue livecd, that is on the regular basis.
2013-03-03 23:54:53 +04:00
@$(call try,SAVE_PROFILE,yes)
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
# base target (for most images)
regular.mk: add eMMC support Should have been done along with commit d887dd1f8a5c57730370b09eedf0959024da78e8 back then! Reported-by: Leonid Krivoshein <klark@altlinux.org>
2018-11-13 18:53:18 +03:00
distro/.regular-base: distro/.regular-bare use/vmguest use/memtest +efi
@$(call add,STAGE1_MODLISTS,stage2-mmc)
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
x11: driver and purpose related refactoring This has had several goals: - a target suitable for x86 and armh providing a rather minimal set of base xorg packages and generic drivers; - task-oriented targets for graphics use cases: + "desktop" means rather 2D focus with 3D being welcome or even essential but not performance critical, thus "a slower driver is fine as long as it does work"; + "3d" means specific 3D performance being critical, that is "no 3D means no use at all". Regarding the free and proprietary 3D-capable drivers: the previous idea was to split out some common ground and then add the contenders on top of that; the current approach is based on the observation that the live images requiring proprietary NVIDIA/AMD drivers *by default* are usually of not much use with hardware that lacks proper 3D acceleration (like Tseng cards) or the driver support for that (like Matrox these days). Intel videodriver makes for a special case though: it is both free and top-notch performer. Thanks sem@ and boyarsh@ for discussion. PS: xorg-drv-{keyboard,mouse,void} dropped; those who need these can usually help themselves.
2013-05-30 21:06:39 +04:00
# graphical target (not enforcing xorg drivers or blobs)
mixin.mk, regular.mk: factored out mixin/regular-x11 This mixin will be useful for non-ISO image builds.
2018-12-24 14:47:23 +03:00
distro/.regular-x11: distro/.regular-base \
use/x11/wacom use/x11/amdgpu +vmguest +wireless \
live.mk, regular.mk: move use/stage2/cifs upwards sin@ was overly optimistic about CIFS boot needs, I think he rather meant starterkits so let's move this into regular build rules -- use/stage2/cifs is the only addition (the other things just got re-messed up).
2018-10-15 20:57:59 +03:00
use/stage2/cifs use/live/rw use/live/x11 use/live/repo \
mixin.mk, regular.mk: factored out mixin/regular-x11 This mixin will be useful for non-ISO image builds.
2018-12-24 14:47:23 +03:00
use/live/install use/live/suspend use/browser/firefox/live
@$(call add,LIVE_PACKAGES,livecd-install-apt-cache)
regular.mk: reduced rescue participation somewhat The regular images became a bit too fat and rescueish with all the good stuff going into rescue+extra pkglist; that stuff does belong to dedicated rescue images but not to each and every one. The base+rescue pkglist has been tailored to take this into account so we can now make regular-*.iso more fit too.
2013-04-22 23:29:41 +04:00
@$(call add,LIVE_LISTS,$(call tags,base rescue))
regular.mk: added livecd-install-apt-cache Carrying over metadata and packages downloaded by apt while being run off a LiveCD is implemented as suggested in #29192.
2013-09-27 20:15:02 +04:00
@$(call add,LIVE_PACKAGES,gpm livecd-install-apt-cache)
live, server, e2k.mk, regular.mk: use/services/lvm2-disable These used to carry (or need) their own means for the same problem of extra services consuming bootup time.
2017-08-02 21:46:01 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,gpm powertop)
regular.mk: allow EFI boot to make/use RW overlay propagator-20150306-alt1 and make-initrd-propagator-0.25-alt1 have made it actually possible to use resulting LiveCD images along with USB flash media to achieve data persistence that's been long available for BIOS boot mode (see also #28289). This isn't perfect but let's try flipping the switch: all desktop regular builds are now "live_rw" by default in EFI mode. This requires mkimage >= 0.2.17.
2015-03-09 21:23:22 +03:00
@$(call add,EFI_BOOTARGS,live_rw)
x11: driver and purpose related refactoring This has had several goals: - a target suitable for x86 and armh providing a rather minimal set of base xorg packages and generic drivers; - task-oriented targets for graphics use cases: + "desktop" means rather 2D focus with 3D being welcome or even essential but not performance critical, thus "a slower driver is fine as long as it does work"; + "3d" means specific 3D performance being critical, that is "no 3D means no use at all". Regarding the free and proprietary 3D-capable drivers: the previous idea was to split out some common ground and then add the contenders on top of that; the current approach is based on the observation that the live images requiring proprietary NVIDIA/AMD drivers *by default* are usually of not much use with hardware that lacks proper 3D acceleration (like Tseng cards) or the driver support for that (like Matrox these days). Intel videodriver makes for a special case though: it is both free and top-notch performer. Thanks sem@ and boyarsh@ for discussion. PS: xorg-drv-{keyboard,mouse,void} dropped; those who need these can usually help themselves.
2013-05-30 21:06:39 +04:00
# WM base target
mixin.mk, regular.mk: factored out mixin/regular-x11 This mixin will be useful for non-ISO image builds.
2018-12-24 14:47:23 +03:00
distro/.regular-wm: distro/.regular-x11 mixin/regular-x11 \
regular.mk: add bootloader branding to all desktop flavours branding-*-bootloader package contains grub2 theme.
2019-05-28 19:51:19 +03:00
mixin/regular-desktop use/efi/refind
@$(call add,THE_BRANDING,bootloader)
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
refactored regular images This change mostly concerns with making icewm flavour the lean one again. The goal is to widen the dynamic range of regular image features: icewm is not a desktop thus can bear withouth systemd-logind even if a bunch of network-managing-media-mounting crap has been rigged to depend on it, and ALT domain client should be included in most builds for convenient testing in SMB environments but can stay out of this minimal and "different" image. It also receives the "un-def" kernel flavour (3.8.0 as of today) which might benefit from the more available testing facility too. Its branding is also simplified, plain syslinux menu is fine; in similar vein, refind feature is flipped from icewm-only to all-but-icewm set of images with its state being good enough as of refind 0.6.7 and mkimage 0.2.7.
2013-02-21 12:13:06 +04:00
# DE base target
# TODO: use/plymouth/live when luks+plymouth is done, see also #28255
regular.mk: .regular-base -> .regular-wm There's considerable confusion accumulated over the expansion of regular builds with non-GUI targets: - bare meant quite a lot including wireless; - base meant GUI base actually, so rescue, server, and especially jeos images had to either cope with the bloat or start from scratch. Let's fix "base" first...
2015-02-17 19:43:21 +03:00
distro/.regular-desktop: distro/.regular-wm \
regular.mk: use optimal systemd-settings for desktop regular builds
2019-08-26 23:53:51 +03:00
use/syslinux/ui/gfxboot use/firmware/laptop +systemd-optimal
refactored regular images This change mostly concerns with making icewm flavour the lean one again. The goal is to widen the dynamic range of regular image features: icewm is not a desktop thus can bear withouth systemd-logind even if a bunch of network-managing-media-mounting crap has been rigged to depend on it, and ALT domain client should be included in most builds for convenient testing in SMB environments but can stay out of this minimal and "different" image. It also receives the "un-def" kernel flavour (3.8.0 as of today) which might benefit from the more available testing facility too. Its branding is also simplified, plain syslinux menu is fine; in similar vein, refind feature is flipped from icewm-only to all-but-icewm set of images with its state being good enough as of refind 0.6.7 and mkimage 0.2.7.
2013-02-21 12:13:06 +04:00
@$(call add,THE_BRANDING,bootloader)
mixin.mk, regular.mk: fix portability mixin/regular-desktop can be used in non-x86 builds where dualboot situation tends to be more rare; let's keep this installer feature (tweaking installer to pick up "other" filesystems) to regular.mk.
2018-12-24 14:56:00 +03:00
@$(call add,THE_PACKAGES,installer-feature-desktop-other-fs-stage2)
refactored regular images This change mostly concerns with making icewm flavour the lean one again. The goal is to widen the dynamic range of regular image features: icewm is not a desktop thus can bear withouth systemd-logind even if a bunch of network-managing-media-mounting crap has been rigged to depend on it, and ALT domain client should be included in most builds for convenient testing in SMB environments but can stay out of this minimal and "different" image. It also receives the "un-def" kernel flavour (3.8.0 as of today) which might benefit from the more available testing facility too. Its branding is also simplified, plain syslinux menu is fine; in similar vein, refind feature is flipped from icewm-only to all-but-icewm set of images with its state being good enough as of refind 0.6.7 and mkimage 0.2.7.
2013-02-21 12:13:06 +04:00
@$(call set,KFLAVOURS,std-def)
regular.mk: change lightdm-gtk-greeter to slick-greeter ...as gtk one is quite bare to be frank.
2018-07-08 20:38:23 +03:00
distro/.regular-gtk: distro/.regular-desktop use/x11/lightdm/slick +plymouth; @:
mixin.mk, regular.mk: switch sysvinit builds to elogind elogind provides sessions for polkit; use/init/sysv/polkit and use/deflogin/sysv/nm are not needed anymore, polkit-agent is needed instead.
2019-04-08 14:37:14 +03:00
regular.mk: rename targets for unification .regular-sysv -> .regular-desktop-sysv .regualar-sysv-gtk -> regular-gtk-sysv
2019-11-16 21:15:02 +03:00
distro/.regular-desktop-sysv: distro/.regular-wm use/init/sysv/polkit; @:
distro/.regular-gtk-sysv: distro/.regular-desktop-sysv \
use/syslinux/ui/gfxboot use/x11/gdm2.20; @:
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
distro/.regular-install: distro/.regular-base +installer \
regular.mk: add use/stage2/kms for all installer Needed for running installer.
2019-12-31 14:32:48 +03:00
use/branding use/bootloader/grub use/luks use/stage2/kms \
regular.mk: use/efi/refind for all targets, except jeos elilo does not support secure boot with shim-signed 15. jeos does not require Secure Boot.
2019-04-12 13:44:58 +03:00
use/install2/fs use/install2/vnc use/install2/repo \
use/efi/refind
regular.mk: add fdisk to installers ...following alt-workstation as well.
2017-12-11 23:49:43 +03:00
@$(call add,INSTALL2_PACKAGES,fdisk)
regular.mk: add xorg-conf-synaptics to installer ...following alt-workstation as well (thank you sem@!).
2017-12-11 23:51:31 +03:00
@$(call add,INSTALL2_PACKAGES,xorg-conf-synaptics)
regular.mk: pick up regular lists for installers A lot of packages that should be in the classic installable images got missed during initial effort; start merging the difference.
2013-11-28 17:38:17 +04:00
@$(call add,THE_LISTS,$(call tags,base regular))
regular.mk: regular-server refactoring distro/.regular-install is now factored out to be reused in tde based installer (and potentially more images later on). This implies sysvinit at the moment which might change too but looks just fine right now.
2013-11-13 17:42:01 +04:00
@$(call add,INSTALL2_BRANDING,alterator notes)
@$(call add,THE_BRANDING,alterator)
regular.mk: split out a mixin Parts common to both livecd and installer images factored out to avoid duplication.
2013-11-13 20:38:57 +04:00
regular.mk: refactored jeos, added jeos-ovz We've been pruning quite a few packages from a recently installed altlinux-p7-server-ovz instance; looks like server-ovz's added functionality should go into plain server instead, and -ovz flavour should focus on bare metal HN. In particular, bash-completion-1.99-alt3 seems to misbehave with mount(8) at the very least -- better drop it for now.
2016-01-29 16:00:07 +03:00
# common base for the very bare distros
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
distro/.regular-jeos-base: distro/.regular-bare \
regular.mk: split out .regular-jeos-base This is needed for a custom autoinstalling image with grub (as installer-feature-serial-stage3 doesn't support lilo reliably yet); see bootloader feature's README regarding the switch but the change is basically a no-op for the .regular-jeos intermediate target.
2017-03-31 21:43:06 +03:00
use/isohybrid use/branding use/bootloader/grub \
regular.mk: setup repo for jeos too It's a bit sad to hit a minimalistic environment with apt knowing no repositories at all...
2015-03-02 19:18:43 +03:00
use/install2/repo use/install2/packages \
regular.mk: split out .regular-jeos-base This is needed for a custom autoinstalling image with grub (as installer-feature-serial-stage3 doesn't support lilo reliably yet); see bootloader feature's README regarding the switch but the change is basically a no-op for the .regular-jeos intermediate target.
2017-03-31 21:43:06 +03:00
use/net/etcnet use/power/acpi/button
@$(call set,BOOTVGA,)
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
@$(call set,INSTALLER,altlinux-generic)
@$(call add,INSTALL2_BRANDING,alterator notes)
@$(call add,THE_BRANDING,alterator) # just to be cleaned up later on
regular.mk: add su, agetty to jeos These were clearly missing!
2019-09-03 18:45:42 +03:00
@$(call add,THE_PACKAGES,apt basesystem dhcpcd vim-console su agetty)
regular.mk: refactored jeos, added jeos-ovz We've been pruning quite a few packages from a recently installed altlinux-p7-server-ovz instance; looks like server-ovz's added functionality should go into plain server instead, and -ovz flavour should focus on bare metal HN. In particular, bash-completion-1.99-alt3 seems to misbehave with mount(8) at the very least -- better drop it for now.
2016-01-29 16:00:07 +03:00
@$(call add,THE_LISTS,openssh)
regular.mk: split out .regular-jeos-base This is needed for a custom autoinstalling image with grub (as installer-feature-serial-stage3 doesn't support lilo reliably yet); see bootloader feature's README regarding the switch but the change is basically a no-op for the .regular-jeos intermediate target.
2017-03-31 21:43:06 +03:00
# ...and for somewhat bare distros
regular.mk: add use/stage2/kms for all installer Needed for running installer.
2019-12-31 14:32:48 +03:00
distro/.regular-jeos: distro/.regular-jeos-base use/stage2/kms \
regular.mk: use grub for jeos
2019-11-18 17:22:06 +03:00
use/syslinux/lateboot.cfg \
regular.mk: split out .regular-jeos-base This is needed for a custom autoinstalling image with grub (as installer-feature-serial-stage3 doesn't support lilo reliably yet); see bootloader feature's README regarding the switch but the change is basically a no-op for the .regular-jeos intermediate target.
2017-03-31 21:43:06 +03:00
use/install2/cleanup/everything use/install2/cleanup/kernel/everything \
use/cleanup/jeos
@$(call add,BASE_KMODULES,guest scsi vboxguest)
@$(call add,BASE_PACKAGES,make-initrd-mdadm cpio)
regular.mk: refactored jeos, added jeos-ovz We've been pruning quite a few packages from a recently installed altlinux-p7-server-ovz instance; looks like server-ovz's added functionality should go into plain server instead, and -ovz flavour should focus on bare metal HN. In particular, bash-completion-1.99-alt3 seems to misbehave with mount(8) at the very least -- better drop it for now.
2016-01-29 16:00:07 +03:00
# NB:
# - stock cleanup is not enough (or installer-common-stage3 deps soaring)
p9.mk, regular.mk, regular-vm.mk: rename targets for unification
2019-11-16 21:40:39 +03:00
distro/regular-jeos-sysv: distro/.regular-jeos use/cleanup/jeos/full \
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
use/volumes/jeos use/install2/vmguest use/vmguest/bare +sysvinit
regular.mk: added gdisk to jeos The image is small but the storage can be huge; this is to handle it (less than +500k installed).
2018-03-11 20:26:53 +03:00
@$(call add,BASE_PACKAGES,nfs-utils gdisk)
regular.mk: add firmware-linux to available packages This is to avoid "unzip.zip" situations with some NICs: those needing extended firmware package (which is hefty) can at least install it by hand off the ISO. *Maybe* a switch to use/firmware will appear reasonable some day for this image either, don't know yet; this adds firmware to installer itself (should only be needed if the storage device used for rootfs *needs* firmware found in that package as networking setup is omitted from JeOS installer).
2016-04-21 12:11:57 +03:00
@$(call add,MAIN_PACKAGES,firmware-linux)
regular.mk: leave glib2 alone with jeos It's needed for both qemu-guest-agent and open-vm-tools, sigh. Will only impact installed size but quite noticeably: installing these into an overcleaned system as of previous commit and today's p8 takes 42 Mb more.
2018-03-11 19:59:23 +03:00
@$(call add,CLEANUP_PACKAGES,libffi 'libltdl*')
regular.mk: refactored jeos, added jeos-ovz We've been pruning quite a few packages from a recently installed altlinux-p7-server-ovz instance; looks like server-ovz's added functionality should go into plain server instead, and -ovz flavour should focus on bare metal HN. In particular, bash-completion-1.99-alt3 seems to misbehave with mount(8) at the very least -- better drop it for now.
2016-01-29 16:00:07 +03:00
@$(call add,CLEANUP_PACKAGES,bridge-utils)
regular.mk: disable fbsetfont service for jeos ...as it doesn't setup framebuffer in the first place.
2018-03-11 19:14:03 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,fbsetfont)
regular.mk: "quiet" down jeos flavour This image doesn't deign to waste one's time by presenting them with a bootloader menu and a few other things; make it even less verbose where not neccessary.
2015-03-09 21:17:18 +03:00
@$(call add,STAGE2_BOOTARGS,quiet)
regular.mk: switch jeos to un-def Rationale: it's the minimalistic image for those who know what they're doing, let's maximize their chances to get it installed and running by using a recent kernel.
2016-04-21 12:07:54 +03:00
@$(call set,KFLAVOURS,un-def)
regular.mk: initial regular-jeos This is a minimalistic ALT-based system installer tailored for those who know how to bring up networking and apt-get the packages they actually need; thanks frbrgeorge@ for proposing the specification as well as sem@ and glebfm@ for discussion. No mc, no glibc-locales, even no man and interactivesystem! Packages included: apt basesystem openssh vim-console PS: Sisyphus-based regular build is not the main goal though thus the p7/branch {bri,klu}dge.
2014-02-26 18:26:31 +04:00
regular.mk: refactored jeos, added jeos-ovz We've been pruning quite a few packages from a recently installed altlinux-p7-server-ovz instance; looks like server-ovz's added functionality should go into plain server instead, and -ovz flavour should focus on bare metal HN. In particular, bash-completion-1.99-alt3 seems to misbehave with mount(8) at the very least -- better drop it for now.
2016-01-29 16:00:07 +03:00
# NB: no +efi as it brings in grub2 (no ELILO support for system boot)
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
distro/regular-jeos-ovz: distro/.regular-jeos +sysvinit \
regular.mk: lock down jeos-ovz as per ldv@'s advice This is a set of control(8) non-defaults that's recommended for use with servers of significant security requirements.
2016-01-29 22:36:30 +03:00
use/server/ovz-base use/control/server/ldv use/firmware
regular.mk: refactored jeos, added jeos-ovz We've been pruning quite a few packages from a recently installed altlinux-p7-server-ovz instance; looks like server-ovz's added functionality should go into plain server instead, and -ovz flavour should focus on bare metal HN. In particular, bash-completion-1.99-alt3 seems to misbehave with mount(8) at the very least -- better drop it for now.
2016-01-29 16:00:07 +03:00
@$(call add,THE_PACKAGES,ipmitool lm_sensors3 mailx)
regular.mk: added dependency on mixin/regular-x11 This allows to unify the contents of regular builds.
2019-03-13 22:00:47 +03:00
distro/.regular-install-x11: distro/.regular-install +vmguest +wireless \
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
use/install2/suspend mixin/regular-desktop mixin/regular-x11 \
use/branding/complete use/branding/slideshow/once
regular.mk: use installer-distro-altlinux-desktop ...instead of installer-distro-desktop which pulls in alterator-auth which breaks things big time for sysv-tde installer image due to avahi-daemon lazy to run. Of course it's the last step of installation that has to fail. And I've been considering this for several months already anyways.
2013-12-23 22:49:15 +04:00
@$(call set,INSTALLER,altlinux-desktop)
regular.mk: regular-server refactoring distro/.regular-install is now factored out to be reused in tde based installer (and potentially more images later on). This implies sysvinit at the moment which might change too but looks just fine right now.
2013-11-13 17:42:01 +04:00
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
# assumes somewhat more experienced user
regular.mk: introduced distro/.regular-install-x11-full This one is slated for sysv installers (but should be rather generic in that regard) through adding features suggested by those users who also tend to care for sysvinit here. :) The commit should be no-op either.
2016-12-03 21:15:24 +03:00
distro/.regular-install-x11-full: distro/.regular-install-x11 \
regular.mk: use/fonts/chinese ...following alt-workstation.
2017-12-11 23:48:59 +03:00
use/fonts/otf/adobe use/fonts/otf/mozilla use/fonts/chinese \
mixin.mk, regular.mk: cleanup install
2019-11-18 17:22:06 +03:00
mixin/desktop-installer use/install2/fs use/efi/shell use/rescue/base
regular.mk: introduced distro/.regular-install-x11-full This one is slated for sysv installers (but should be rather generic in that regard) through adding features suggested by those users who also tend to care for sysvinit here. :) The commit should be no-op either.
2016-12-03 21:15:24 +03:00
@$(call add,RESCUE_LISTS,$(call tags,rescue misc))
@$(call add,MAIN_PACKAGES,anacron man-whatis usb-modeswitch)
p9.mk, regular.mk, regular-vm.mk: rename targets for unification
2019-11-16 21:40:39 +03:00
distro/regular-icewm-sysv: distro/.regular-gtk-sysv mixin/regular-icewm \
regular.mk: use/efi/refind for all targets, except jeos elilo does not support secure boot with shim-signed 15. jeos does not require Secure Boot.
2019-04-12 13:44:58 +03:00
use/browser/chromium
regular.mk: use various kernels again un-def got unsuitable due to initial ramdisk migrating from initramfs to tmpfs by default in newer kernels, and propagator was using pretty kludgy way to determine that /dev has been mounted already; led-ws (and supposedly lks-wks) have stumbled upon this earlier. 20130822 version has been fixed regarding that.
2013-12-24 14:51:13 +04:00
@$(call set,KFLAVOURS,un-def)
regular.mk: added xxkb to regular-icewm Thanks aen@ for suggesting this.
2013-01-16 23:05:35 +04:00
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
# wdm can't do autologin so add standalone one for livecd
p9.mk, regular.mk, regular-vm.mk: rename targets for unification
2019-11-16 21:40:39 +03:00
distro/regular-wmaker-sysv: distro/.regular-desktop-sysv \
browser, regular.mk: drop palemoon ...it's no more in Sisyphus too: See-also: http://git.altlinux.org/tasks/archive/done/_232/238525
2019-10-02 14:35:10 +03:00
mixin/regular-wmaker use/live/autologin
regular.mk: added wmxkbru to wmaker This one has been suggested by YYY: https://forum.altlinux.org/index.php?topic=35623.msg268496#msg268496
2015-10-29 17:57:44 +03:00
@$(call add,LIVE_PACKAGES,wdm wmxkbru)
regular.mk: initial regular-{wmaker,gnustep} Thanks aen@ for the whole pkglist and vast amounts of advice and inspiration; thanks real@ and kostyalamer for the packages themselves.
2013-03-01 21:08:33 +04:00
p9.mk, regular.mk, regular-vm.mk: rename targets for unification
2019-11-16 21:40:39 +03:00
distro/regular-gnustep-sysv: distro/.regular-desktop-sysv \
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
mixin/regular-wmaker mixin/regular-gnustep; @:
regular.mk: .regular-base -> .regular-wm There's considerable confusion accumulated over the expansion of regular builds with non-GUI targets: - bare meant quite a lot including wireless; - base meant GUI base actually, so rescue, server, and especially jeos images had to either cope with the bloat or start from scratch. Let's fix "base" first...
2015-02-17 19:43:21 +03:00
distro/regular-gnustep-systemd: distro/.regular-wm +systemd \
regular.mk: added regular-gnustep-systemd.iso aen@ asked to ship this one as well; no problem given mixins, still being able to *switch* the init instead of regrafting would be very beneficial. NB: - wdm can't do autologin; - wdm can poweroff/halt; - wdm+autologin won't work under systemd (via prefdm.service); - nodm will work under systemd; - nodm will ruin consolehelper -> livecd-install by root's PATH; - gdm2.20 is lightweight, feature complete and sovereign enough.
2014-03-26 19:58:00 +04:00
mixin/regular-wmaker mixin/regular-gnustep; @:
mixin.mk, regular.mk: allow mixins to depend on mixins Looks like the initial empirical rule "mixin must not depend on another mixin" is too restrictive for practical purposes given enough image targets multiplied by enough platforms; let's declare it obsolete and see what follows.
2019-09-02 18:07:32 +03:00
distro/regular-xfce: distro/.regular-gtk mixin/regular-xfce; @:
regular.mk: switch kernels for xfce* flavours xfce goes un-def, xfce-sysv rolls back to std-def: http://forum.altlinux.org/index.php?topic=36177.msg299141#msg299141 (and Simply 8 is going to use std-def as well, so for more diversity...)
2016-11-08 20:42:23 +03:00
@$(call set,KFLAVOURS,un-def)
regular.mk: added fontconfig-infinality to lxde ...and refactored its use in cinnamon image too; this isn't a permanent solution though, slated to move into fonts feature. Thanks gns@ for suggestion.
2013-02-26 20:43:24 +04:00
regular.mk: rename targets for unification .regular-sysv -> .regular-desktop-sysv .regualar-sysv-gtk -> regular-gtk-sysv
2019-11-16 21:15:02 +03:00
distro/regular-xfce-sysv: distro/.regular-gtk-sysv mixin/regular-xfce-sysv; @:
regular.mk, p7.mk: initial xfce-sysv flavour This one has been requested by a user over at #altlinux and seems working, at least when built on p7/branch.
2015-03-29 17:57:16 +03:00
p9.mk, regular.mk, regular-vm.mk: rename targets for unification
2019-11-16 21:40:39 +03:00
distro/regular-xfce-sysv-install: distro/.regular-install-x11-full \
mixin.mk, regular.mk: allow mixins to depend on mixins Looks like the initial empirical rule "mixin must not depend on another mixin" is too restrictive for practical purposes given enough image targets multiplied by enough platforms; let's declare it obsolete and see what follows.
2019-09-02 18:07:32 +03:00
mixin/regular-xfce-sysv; @:
mixin.mk, regular.mk: unified sysv-xfce and xfce-sysv Also added qasmixer in mixin/regular-xfce-sysv
2019-05-21 10:11:17 +03:00
regular.mk, desktop+lxde: refactoring With the arrival of elogind in sysvinit, the lxde metapackage can be used for all builds.
2019-04-09 18:15:25 +03:00
distro/regular-lxde: distro/.regular-gtk mixin/regular-lxde; @:
Added distro/regular-lxde-sysv and distro/alt-p8-lxde-sysv
2017-07-30 13:37:57 +03:00
xmonad: add livecd-regular-xmonad
2013-02-27 01:32:50 +04:00
distro/regular-xmonad: distro/.regular-gtk use/x11/xmonad
@$(call add,LIVE_PACKAGES,livecd-regular-xmonad)
regular.mk: add regular-xmonad
2013-02-18 01:53:06 +04:00
mixin.mk, regular.mk: allow mixins to depend on mixins Looks like the initial empirical rule "mixin must not depend on another mixin" is too restrictive for practical purposes given enough image targets multiplied by enough platforms; let's declare it obsolete and see what follows.
2019-09-02 18:07:32 +03:00
distro/regular-mate: distro/.regular-gtk mixin/regular-mate; @:
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
regular.mk, mixin.mk: drop use/fonts/infinality It's been used in cinnamon, enlightenment and lxde{,-based} flavours but is rather deprecated/unsupported by now as maintainer explains the upstream status: https://lists.altlinux.org/pipermail/sisyphus/2018-February/366450.html
2018-02-04 02:46:23 +03:00
distro/regular-enlightenment: distro/.regular-gtk use/x11/enlightenment; @:
regular.mk: e19 -> enlightenment The packages have been renamed quite some time ago indeed, and dancing image URLs don't help a lot.
2015-10-29 16:56:47 +03:00
mixin.mk, regular.mk: factor out cinnamon, kde5 ...into mixins to make the distro configuration more reusable and portable across target arches. Think grafting instead of just growing from seed. See-also: ba437ba8281b12148c577f6378ed2b52d880139e
2019-07-03 20:01:16 +03:00
distro/regular-cinnamon: distro/.regular-gtk mixin/regular-cinnamon; @:
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
regular.mk: explicitly add NM to a few images As it happens regular-rc testing has shown that cinnamon, gnome3 and kde4 flavours included NM via their pkglists and dependencies (which used to result in live feature enabling NetworkManager service wholesale when found); now when handling default services has become more strict it became apparent that these images have got their LiveCD mode running without network by default (installation does set that up though). It looks like an easy way to just stick +nm into .regular-desktop dependencies but then razorqt, sugar, xmonad would get NM which is not what they're gonna handle; e17/e18 too.
2014-03-18 13:52:44 +04:00
# not .regular-gtk due to gdm vs lightdm
mixin.mk, regular.mk: add +nm-gtk to gtk-based regular builds ...to extend the supported protocols list as suggested. See-also: b869d365f195a7070f1f6c425795b4c058b18c6c
2019-09-09 22:25:48 +03:00
distro/regular-gnome3: distro/.regular-desktop +plymouth +nm-gtk \
regular.mk: add the ability to install gnome-shell add-ons through firefox NB: firefox-gnome_shell_integration will turn into a pumpkin after firefox 74! Suggested-by: Annoynymous See-also: http://www.opennet.ru/openforum/vsluhforumID3/118861.html#129 See-also: http://www.opennet.ru/opennews/art.shtml?num=51793
2019-11-01 09:24:23 +03:00
use/x11/gnome3 use/fonts/ttf/redhat
regular.mk: move un-def from cinnamon to gnome3 rider@ asked to move gnome3 to un-def kernel flavour, and there's an unofficial policy for regular builds that these carry reasonable diversity (in a good sense) as in various kernels, inits, etc; that diversity would drop a bit of both GNOME3 based flavours would end up with the same kernel, so let's mv not cp.
2015-11-16 21:42:50 +03:00
@$(call set,KFLAVOURS,un-def)
regular.mk: update gnome3 "setup done" package See also https://bugzilla.altlinux.org/32040 (there's no P:/O: in the new one so the update must be done in sync here)
2016-05-16 09:18:14 +03:00
@$(call add,LIVE_PACKAGES,livecd-gnome3-setup-done)
regular.mk: added templates to gnome3 This has been proposed and largely implemented by antohami@, see also #30851.
2015-09-06 14:45:28 +03:00
@$(call add,LIVE_PACKAGES,gnome3-regular xcalib templates)
regular.mk: add screenpen to gnome3 flavour ROSA's legacy...
2017-09-08 17:38:14 +03:00
@$(call add,LIVE_PACKAGES,gnome-flashback screenpen)
regular.mk: add the ability to install gnome-shell add-ons through firefox NB: firefox-gnome_shell_integration will turn into a pumpkin after firefox 74! Suggested-by: Annoynymous See-also: http://www.opennet.ru/openforum/vsluhforumID3/118861.html#129 See-also: http://www.opennet.ru/opennews/art.shtml?num=51793
2019-11-01 09:24:23 +03:00
@$(call add,LIVE_PACKAGES,chrome-gnome-shell)
@$(call add,LIVE_PACKAGES,firefox-gnome_shell_integration)
regular.mk: add gnome-software-disable-updates to regular gnome3
2019-12-10 08:17:56 +03:00
@$(call add,LIVE_PACKAGES,gnome-software-disable-updates)
regular.mk: initial regular-gnome3 It would be great to have #28289 fixed either so that aris@ could approve the image as usable (I totally agree that it's a major piece of real world functionality currently missing) looks like there's sense to prepare a starter iso for tests.
2013-01-15 19:00:59 +04:00
mixin.mk, distro.mk: move falkon to the distro itself It is wrong to make it impossible to use the default browser (firefox) for targets using mixin/regular-lxqt given the caveat with setting a variable to X, then to Y, then to X again through make targets (see e.g. bootloader feature's README).
2019-01-11 07:27:01 +03:00
distro/regular-lxqt: distro/.regular-desktop mixin/regular-lxqt +plymouth \
mixin.mk, regular.mk: move sddm to distro/regular-lxqt sddm doesn't work with sysvinit currently, so this mixin is not a good place to specify the display manager; and different platforms may have different needs, e.g. sddm has just stopped working on aarch64 boards.
2019-06-09 17:59:39 +03:00
use/browser/falkon use/x11/sddm
distro/regular-lxqt: added desktop+lxqt+extra regular-lxqt.iso is intended for actual use, and therefore may be allowed to contain a lot of packages that are not related to DE.
2019-01-28 11:47:23 +03:00
@$(call add,THE_LISTS,$(call tags,lxqt desktop))
regular.mk: initial regular-lxqt-sysv This has been asked for by lewellyn@freenode, why not. NB: distro/.regular-sysv doesn't include use/net-eth/dhcp (as it looks like asking for) since there's still hope to get NM cooperating with sysvinit again.
2014-10-29 18:09:43 +03:00
mixin.mk, regular.mk: factor out cinnamon, kde5 ...into mixins to make the distro configuration more reusable and portable across target arches. Think grafting instead of just growing from seed. See-also: ba437ba8281b12148c577f6378ed2b52d880139e
2019-07-03 20:01:16 +03:00
distro/regular-kde5: distro/.regular-desktop \
mixin/regular-kde5 use/domain-client use/x11/sddm +plymouth; @:
regular.mk: initial kde5 flavour This is known to work using 5.2.2/5.3.0 packages but is still pretty basic regarding functionality.
2015-04-20 22:06:44 +03:00
regular.mk, live.mk: use regular-mate for regular-robotics ...instead of live-tde.
2016-01-05 17:27:50 +03:00
distro/regular-robo: distro/regular-mate +robotics use/live/ru; @:
regular.mk: initial rescue-netbootxyz flavour This one has been split from regular rescue following discussion with Will Glynn; some hefty bits like UEFI support or an extra squashfs to check the image integrity aren't needed, so let's just build a slimmer ISO instead. Suggested-by: Will Glynn <will@willglynn.com> See-also: https://bugzilla.altlinux.org/33374
2017-04-14 19:00:42 +03:00
distro/regular-rescue: distro/.regular-base mixin/regular-rescue \
use/rescue/rw use/efi/refind use/efi/shell use/efi/memtest86 \
use/hdt use/syslinux/rescue_fm.cfg use/syslinux/rescue_remote.cfg \
use/mediacheck +wireless
regular.mk: use various kernels again un-def got unsuitable due to initial ramdisk migrating from initramfs to tmpfs by default in newer kernels, and propagator was using pretty kludgy way to determine that /dev has been mounted already; led-ws (and supposedly lks-wks) have stumbled upon this earlier. 20130822 version has been fixed regarding that.
2013-12-24 14:51:13 +04:00
@$(call set,KFLAVOURS,un-def)
regular.mk: rescue with remote access and a minute The goal of implementing rescue_remote was regular-rescue.iso indeed; so let's both add it and bump the default boot timeout to 600 deciseconds, that is, a minute: 20 seconds might be way too low for some slow IP-KVM/iKVM use cases.
2015-06-01 15:26:14 +03:00
@$(call add,RESCUE_PACKAGES,gpm livecd-net-eth)
regular.mk: dropped smartcard support from rescue It's rare enough that more complete images could be used, and it pulls in polkit with mozjs which is terrible here. Never been a feature request but rather a TODO item, and image size is what folks seem to be actually concerned with. Reverts: 29ad2393545820fd8835de95c471b937be7a9514
2017-06-01 16:16:05 +03:00
@$(call add,RESCUE_LISTS,$(call tags,base bench))
regular.mk: a few netsec tools to the rescue This one has been triggered by a macchange NMU speeding through sisyphus-cybertalk@...
2015-12-05 13:31:40 +03:00
@$(call add,RESCUE_LISTS,$(call tags,network security))
regular.mk: introduced regular-rescue This one was just asking to be built for quite a long time; http://sourceforge.net/apps/trac/smartmontools/wiki/LiveCDs specifically accenting use of smartmontools 6.0 has finally persuaded me to roll out yet another rescue livecd, that is on the regular basis.
2013-03-03 23:54:53 +04:00
regular.mk: initial rescue-netbootxyz flavour This one has been split from regular rescue following discussion with Will Glynn; some hefty bits like UEFI support or an extra squashfs to check the image integrity aren't needed, so let's just build a slimmer ISO instead. Suggested-by: Will Glynn <will@willglynn.com> See-also: https://bugzilla.altlinux.org/33374
2017-04-14 19:00:42 +03:00
distro/regular-rescue-netbootxyz: distro/.regular-bare mixin/regular-rescue
@$(call set,RELNAME,en.altlinux.org/rescue (netboot.xyz edition))
@$(call set,META_VOL_ID,ALT Rescue)
@$(call set,META_APP_ID,$(ARCH))
regular.mk: add use/stage2/kms for all installer Needed for running installer.
2019-12-31 14:32:48 +03:00
distro/.regular-server-base: distro/.regular-install use/server/base
regular.mk: added vlan-utils to server-pve ...as requested by chemyakyn; the implementation differs somewhat as the whole server+network pkglist seems reasonable in all of the regular server builds.
2017-02-03 16:01:21 +03:00
@$(call add,THE_LISTS,$(call tags,server && (regular || network)))
regular.mk: regular-server tweaks LUKS seems like a worthwile addition to this particular image; it's also switched to use installer-distro-altlinux-server for both LUKS support (until installer-steps are dynamic) and server-oriented partitioning presets.
2013-10-14 14:25:29 +04:00
@$(call set,INSTALLER,altlinux-server)
regular.mk: add multipath support to servers This might work, need to check with shrek@... (note that installer-scripts-remount-stage2 >= 0.5.10-alt1 is required)
2016-12-05 22:11:36 +03:00
@$(call add,SYSTEM_PACKAGES,multipath-tools)
regular.mk: added multipath feature to servers Has been omitted in commit 35ae35d unfortunately; thanks shrek@ for pointing this out.
2016-12-08 14:41:03 +03:00
@$(call add,INSTALL2_PACKAGES,installer-feature-multipath)
regular.mk: distro/.regular-server-base target This one is intermediate for openstack server too.
2016-05-30 14:31:22 +03:00
distro/.regular-server: distro/.regular-server-base \
regular.mk: avoid systemd in sysv server images too This is alike to the previous commit by antohami@ but affecting the intermediate server target: no systemd-timesyncd when it's not asked for.
2018-06-11 15:42:48 +03:00
use/server/mini use/firmware/qlogic use/rescue/base \
regular.mk: switch server* to grub and +efi Нужно признать, что grub станларт, которму мы должны соответствовать. а поддержка efi у нас полноценна пока только в refind.
2019-11-04 18:58:25 +03:00
use/ntp/client use/cleanup/libs use/bootloader/grub +efi
regular.mk: added rescue+misc to .regular-server ...so it hits the common server images tossing in all the goodies.
2017-02-13 16:22:43 +03:00
@$(call add,RESCUE_LISTS,$(call tags,rescue misc))
regular.mk: distro/.regular-server-base target This one is intermediate for openstack server too.
2016-05-30 14:31:22 +03:00
@$(call add,MAIN_PACKAGES,aptitude)
regular.mk: cleanup qt5-base-common for regular-server
2019-05-20 11:36:44 +03:00
@$(call add,CLEANUP_PACKAGES,qt4-common qt5-base-common)
regular.mk: disable bridge service This has been proposed for server-hyperv by lewellyn@freenode last summer, looks like a reasonable default for all of the server images as those interersted in bridge setup are going to do a few more things anyways.
2015-03-10 13:46:59 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,bridge)
regular.mk: enable getty@tty1 for server-base
2019-11-07 19:32:44 +03:00
@$(call add,DEFAULT_SERVICES_ENABLE,getty@tty1)
regular.mk: initial regular-server A simple server image has been a pretty popular request roughly always; thanks asy@ for specification draft.
2013-05-24 17:37:49 +04:00
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
distro/.regular-server-managed: distro/.regular-server
regular.mk: minor server-hyperv tweaks Matt Lewandowsky suggested that alteratord be enabled but ahttpd be disabled so as to avoid extra port being listened to out-of-box but to be able to turn web GUI on when needed.
2014-06-11 22:21:41 +04:00
@$(call add,THE_PACKAGES,alterator-fbi)
regular.mk: added a few alterator modules to server-hyperv As proposed by Matt Lewandowsky.
2014-06-10 18:57:44 +04:00
@$(call add,THE_LISTS,$(call tags,server alterator))
regular.mk: reworked regular-server a bit This starts a sort of "server merger" by consuming both samba4 and hyperv subflavours into checkboxes. Rationale is pretty clear: environment -- including hypervisors -- is just an install/run-time variable, and the set of initial services is another one; no need to maintain a distinct image for each value when we've done enough of that to know we can merge.
2016-04-27 14:30:31 +03:00
@$(call add,INSTALL2_PACKAGES,ntfs-3g)
regular.mk: disabled alteratord for server-hyperv Makes no sense without ahttpd anyways; thanks lewellyn@freenode again. Disable bridge service as well (gotta figure out what pulls it in).
2014-09-08 22:17:12 +04:00
@$(call add,DEFAULT_SERVICES_DISABLE,ahttpd alteratord)
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
p9.mk, regular.mk: added regular and starterkit jeos-systemd Also added explicit call +sysvinit or +systemd for server targets. Users also want to start the server on systemd. in addition to on aarch64 in qemu, the shell does not start on the serial console for sysvinit. This is critical for non-desktop builds.
2019-11-04 18:02:36 +03:00
distro/.regular-server-full: distro/.regular-server-managed \
regular.mk: added dev/builder group to server We^H^HI need that *now*!
2018-02-19 13:22:07 +03:00
use/server/groups/base use/dev/groups/builder use/install2/vnc/full
server, regular.mk: adjust accordingly All MAIN_GROUPS users which refer to the groups/lists renamed have to adapt; sorry for an incompatible change (still it's 1.1.x).
2016-06-01 09:54:19 +03:00
@$(call add,MAIN_GROUPS,server/sambaDC)
@$(call add,MAIN_GROUPS,tools/hyperv)
regular.mk: rework server{,-ovz} My failure to recognize that it is a "generic" server that might need some generalization and not an already specialized one like OpenVZ HN installer had to be fixed up some day; today is fine. Basically, let's move package groups ("checkboxes") and alterator from server-ovz to server, and maybe beef it up a lil' bit more later; server-ovz is still far from jeos-ovz but the difference that looks unmergeable is strict sshd control setup that's going to bite those unsuspecting, so let's leave it for those of us who are more suspicious of stray ISOs. :)
2016-04-20 18:44:10 +03:00
p9.mk, regular.mk: added regular and starterkit jeos-systemd Also added explicit call +sysvinit or +systemd for server targets. Users also want to start the server on systemd. in addition to on aarch64 in qemu, the shell does not start on the serial console for sysvinit. This is critical for non-desktop builds.
2019-11-04 18:02:36 +03:00
distro/regular-server-systemd: distro/.regular-server-full +systemd; @:
distro/regular-server-sysv: distro/.regular-server-full +sysvinit; @:
distro/.regular-server-ovz: distro/.regular-server \
regular.mk: rework server{,-ovz} My failure to recognize that it is a "generic" server that might need some generalization and not an already specialized one like OpenVZ HN installer had to be fixed up some day; today is fine. Basically, let's move package groups ("checkboxes") and alterator from server-ovz to server, and maybe beef it up a lil' bit more later; server-ovz is still far from jeos-ovz but the difference that looks unmergeable is strict sshd control setup that's going to bite those unsuspecting, so let's leave it for those of us who are more suspicious of stray ISOs. :)
2016-04-20 18:44:10 +03:00
use/server/ovz use/server/groups/tools use/cleanup/x11-alterator
server, regular.mk: adjust accordingly All MAIN_GROUPS users which refer to the groups/lists renamed have to adapt; sorry for an incompatible change (still it's 1.1.x).
2016-06-01 09:54:19 +03:00
@$(call add,MAIN_GROUPS,tools/vzstats)
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
p9.mk, regular.mk: added regular and starterkit jeos-systemd Also added explicit call +sysvinit or +systemd for server targets. Users also want to start the server on systemd. in addition to on aarch64 in qemu, the shell does not start on the serial console for sysvinit. This is critical for non-desktop builds.
2019-11-04 18:02:36 +03:00
distro/regular-server-ovz: distro/.regular-server-ovz +systemd; @:
distro/regular-server-ovz-sysv: distro/.regular-server-ovz +sysvinit; @:
distro/.regular-server-hyperv: distro/.regular-server-managed +systemd
regular.mk: rework server images a bit This refactoring is aimed at both providing reasonable alterator package set in server-ovz (and server-hyperv) while purging the install-time modules from plain server as these were useless without a frontend package like the web-based alterator-fbi.
2015-03-12 00:39:47 +03:00
@$(call set,KFLAVOURS,un-def)
@$(call add,THE_PACKAGES,hyperv-daemons)
regular.mk: server-hyperv: disable more services It'd be better yet to avoid installing hardware-related packages for a purely VM-targeted distro but it'd require some more intermediate forking; while its objectives do include reasonable minimalism it's not as ultimate as for jeos images, thus let's keep some superfluous services around (but disable them).
2016-03-10 19:15:04 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,bridge smartd)
@$(call add,DEFAULT_SERVICES_DISABLE,cpufreq-simple powertop)
regular.mk: add regular-server-un-def For lewellyn@freenode and his Hyper-V Generation 2 VM, regular-rescue happens to boot there.
2014-03-18 21:12:21 +04:00
p9.mk, regular.mk: added regular and starterkit jeos-systemd Also added explicit call +sysvinit or +systemd for server targets. Users also want to start the server on systemd. in addition to on aarch64 in qemu, the shell does not start on the serial console for sysvinit. This is critical for non-desktop builds.
2019-11-04 18:02:36 +03:00
distro/regular-server-pve: distro/.regular-server-base +systemd \
regular.mk: switch server* to grub and +efi Нужно признать, что grub станларт, которму мы должны соответствовать. а поддержка efi у нас полноценна пока только в refind.
2019-11-04 18:58:25 +03:00
use/kernel/server use/firmware/qlogic
regular.mk: initial server-pve This one includes shrek@'s work on proxmox packages ported to ALT Linux (pve-*) and might be incomplete yet.
2016-06-07 18:55:00 +03:00
@$(call set,INSTALLER,altlinux-server)
regular.mk: tweak server-pve a bit ...or rather add the tweaker component so that less work remains to be done upon installation.
2016-10-31 21:41:32 +03:00
@$(call add,INSTALL2_PACKAGES,installer-feature-pve)
regular.mk: fix server-pve X-Brown-Paper-Bag: nfs-clients were missing
2016-12-12 17:22:38 +03:00
@$(call add,THE_PACKAGES,pve-manager nfs-clients su)
regular.mk: added dhcpcd to server-pve Looks like its base is a tad too bare...
2016-12-12 01:17:19 +03:00
@$(call add,THE_PACKAGES,bridge-utils dhcpcd faketime tzdata postfix)
regular.mk: disable pve-* services by default These need configuration before starting things up.
2016-09-22 15:27:11 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,pve-manager pve-cluster \
pve-firewall pve-ha-crm pve-manager pveproxy pvedaemon \
pvefw-logger pve-ha-lrm pvenetcommit pvestatd spiceproxy)
regular.mk: initial server-pve This one includes shrek@'s work on proxmox packages ported to ALT Linux (pve-*) and might be incomplete yet.
2016-06-07 18:55:00 +03:00
mixin.mk, regular.mk: factored out mixin-builder This mixin will be used for non-x86 image builds.
2019-03-21 08:55:20 +03:00
distro/regular-builder: distro/.regular-bare mixin/regular-builder \
regular.mk: split off .regular-bare from .regular-base ...so that regular builds really have common ground again, which is something that got broken with regular-jeos introduction; adjusted jeos and builder flavours to make use of this.
2015-02-17 20:13:45 +03:00
use/dev/builder/full +sysvinit +efi +power \
regular.mk, p7.mk: builder image So ALT Linux has got decent build tools but no one even knows about those, right? And starting to use those is somewhat tedious as it requires ALT installation with a specially crafted user account? live-builder.iso has been useful enough to consider including its relative into starterkits skipping regular builds for roughly the same reasons as those for installers: we're better off helping users to get onto the stable platform bandwagon than having them excited with Sisyphus just to hit some wall down the road (even if we warn of these walls well in advance most of the time), and while packages tend to get into branches via sisyphus repo it's still better to stay on the safe side with what we make easily available.
2014-12-10 22:16:11 +03:00
use/live/base use/live/rw use/live/repo/online use/live/textinstall \
mixin.mk, regular.mk: factored out mixin-builder This mixin will be used for non-x86 image builds.
2019-03-21 08:55:20 +03:00
use/isohybrid use/syslinux/timeout/30 use/stage2/net-eth
@$(call add,THE_PACKAGES,ccache cifs-utils wodim)
regular.mk, p7.mk: builder image So ALT Linux has got decent build tools but no one even knows about those, right? And starting to use those is somewhat tedious as it requires ALT installation with a specially crafted user account? live-builder.iso has been useful enough to consider including its relative into starterkits skipping regular builds for roughly the same reasons as those for installers: we're better off helping users to get onto the stable platform bandwagon than having them excited with Sisyphus just to hit some wall down the road (even if we warn of these walls well in advance most of the time), and while packages tend to get into branches via sisyphus repo it's still better to stay on the safe side with what we make easily available.
2014-12-10 22:16:11 +03:00
p9.mk, regular.mk: added regular and starterkit jeos-systemd Also added explicit call +sysvinit or +systemd for server targets. Users also want to start the server on systemd. in addition to on aarch64 in qemu, the shell does not start on the serial console for sysvinit. This is critical for non-desktop builds.
2019-11-04 18:02:36 +03:00
distro/regular-server-samba4: distro/.regular-server-managed +systemd
regular.mk: updated server-samba4 Adjust accordingly to the pkglist having been renamed.
2015-11-06 19:01:02 +03:00
@$(call add,THE_LISTS,$(call tags,server && (sambaDC || alterator)))
regular.mk: update regular-server-samba4 ...as its former base, regular-server, includes Samba DC too now.
2017-03-09 12:23:55 +03:00
@$(call add,THE_PACKAGES,alterator-dhcp)
regular.mk: added winbind to disabled samba4 services Samba 4.x in domain controller mode works with "samba" service, not legacy smbd/nmbd/winbindd; all of those must be stopped before running the newly-configured one: http://altlinux.org/SambaDC
2015-11-16 17:34:47 +03:00
@$(call add,DEFAULT_SERVICES_DISABLE,smbd nmbd winbind)
regular.mk, p7.mk: server-samba4 flavour The configuration has rather settled down by now although the actual sisyphus/p7 builds still require adding custom repositories (this ought to change for sisyphus but not for p7): http://git.altlinux.org/tasks/138496/ for sisyphus http://git.altlinux.org/tasks/132256/ for p7
2014-09-30 17:36:01 +04:00
regular.mk: added regular server with LXD
2016-03-05 21:28:49 +03:00
distro/regular-server-lxd: distro/.regular-bare \
regular.mk, lxc, lxd: updated regular-server-lxd Use lxd-bridge for networking.
2016-08-25 14:30:39 +03:00
use/isohybrid +power \
regular.mk: added regular server with LXD
2016-03-05 21:28:49 +03:00
use/live/base use/live/rw use/live/repo/online use/live/textinstall \
use/lxc/lxd use/tty/S0 \
use/init/systemd/multiuser
@$(call set,KFLAVOURS,un-def)
@$(call add,DEFAULT_SERVICES_ENABLE,sshd)
regular.mk, lxc, lxd: updated regular-server-lxd Use lxd-bridge for networking.
2016-08-25 14:30:39 +03:00
@$(call add,DEFAULT_SERVICES_ENABLE,lxd-startup lxd-bridge lxcfs cgmanager)
regular.mk: added regular server with LXD
2016-03-05 21:28:49 +03:00
@$(call add,DEFAULT_SERVICES_ENABLE,getty@tty1 getty@ttyS0)
@$(call add,DEFAULT_SERVICES_ENABLE,livecd-net-eth)
regular.mk: update distro/regulare-engineering
2019-09-03 18:44:09 +03:00
distro/regular-engineering: distro/regular-lxde use/live/ru \
use/office/LibreOffice/gtk3 use/office/LibreOffice/lang \
use/office/LibreOffice/still
@$(call add,THE_LISTS,engineering/2d-cad)
@$(call add,THE_LISTS,engineering/3d-cad)
@$(call add,THE_LISTS,engineering/3d-printer)
@$(call add,THE_LISTS,engineering/eda)
@$(call add,THE_LISTS,engineering/cam)
@$(call add,THE_LISTS,engineering/cnc)
@$(call add,THE_LISTS,engineering/apcs)
@$(call add,THE_LISTS,engineering/scada)
New target regular-engineering and alt-p8-engineering
2017-09-09 06:15:11 +03:00
initial regular images See http://www.altlinux.org/Регулярные_сборки_образов for the idea behind this set of images; in short, it's *not* a bunch of polished end-user distros in a moment but rather to facilitate Sisyphus package base testing in as-is state during branch pre-release time.
2012-12-26 00:06:26 +04:00
endif
regular.mk: add docker-sisyphus - docker-sisyphus is an alias for docker
2018-08-14 20:44:58 +03:00
ifeq (ve,$(IMAGE_CLASS))
ve/docker-sisyphus: ve/docker; @:
endif
Reference in New Issue Copy Permalink