IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We seem to have substantial infrastructure drift here between the two, and I was
*really* confused why `TEST_SKIP_CLEANUP` wasn't being honored. Turned out in
rpm-ostree we have tmpdir code in two places, not entirely sure why. Punting
full cleanup.
Closes: #566
Approved by: jlebon
Since the dracut run is now separated from the rest of postprocess, we change it
to use the bwrap API diretly, and this lets use the new _IMMUTABLE bwrap type.
This will make it easier to reuse for client-side initramfs regeneration.
Splitting this off makes it also easier to simplify the remaining mutable
usage in postprocess.c.
Closes: #560
Approved by: jlebon
Make it a real struct with methods. This noticeably increases
the ergonomics and design of the API.
The main goal here is to introduce the enum which defines whether or not the
rootfs is mutable or not. We move the "rofiles" mode from the RPM script code
down into the bwrap layer, which will make it easier to reuse for treecompose.
Closes: #560
Approved by: jlebon
I was planning to do some further changes here, and I really don't like the
manual fork/exec stuff on in the --reproducible checks. Our subprocess code
should basically be all bwrap. Synchronous code execution while not reading from the
pipe is a recipe for deadlocks.
What simplifies things a lot is to write to an `O_TMPFILE` fd (or a tempfile on
legacy kernels), and slightly extend our bwrap-executing code to support a child
setup function, so we can set the tmpfile fd to be stdout.
Now that we have a shell script wrapper we inject, it's trivial to reimplement
the "detect reproducibility" in shell script there, rather than C.
This doesn't matter much for treecompose today, but it will matter more when
we're supporting client side initramfs regeneration, since now the dracut
container can be fully immutable.
Closes: #560
Approved by: jlebon
In a future change I want to optionally rerun dracut between these. Keep the old
API as a trivial wrapper around the two.
Closes: #560
Approved by: jlebon
We should really be logging more into the journal in general,
but particularly this will make it easier to find errors
in the test suite.
Right now we only dump script stderr into the journal.
Closes: #560
Approved by: jlebon
This drops one line + whitespace line from each txn, and updates us to use
autoptr. Just a bit less duplication.
I noticed while doing this that not every txn initializes a cancellable, but not
shaving that yak right now.
Closes: #560
Approved by: jlebon
First try to log in, and if we fail, retry with SSH debugging,
so we have a better idea what might be going wrong. This helped
me figure out that vmcheck's `-o User=root` assumption wasn't
working with my vagrant setup.
Closes: #560
Approved by: jlebon
On Fedora 25, systemd adds a sysuser config file for multiple users. It
also explicitly creates those same users in its %pre, except for one:
systemd-coredump. This means that the tree's /usr/lib/passwd doesn't
contain systemd-coredump. Of course, on first boot, it gets created and
added to /etc/passwd.
During package layering, we map /usr/lib/passwd to the container's
/etc/passwd. If the %pre calls useradd/groupadd without passing an
explicit uid/gid, it's possible that the allocated id is already in use
by an entry in the deployment's /etc/{passwd,group} (such as
systemd-coredump, but the same holds for any manually-added entry).
We resolve this by taking the switcheroo a step further: we map
/usr/lib/passwd to /usr/etc/passwd, and then also map /etc/passwd to
/usr/lib/passwd. That way, useradd in %pre will account for already
allocated local uids and react accordingly.
Closes: #561
Approved by: cgwalters
This is useful when you want to rerun vmcheck after changing the test
case (rather than any compiled code), so no new overlay is actually
required.
Closes: #561
Approved by: cgwalters
We lift the restriction from the unpacker on non-root owners. The
unpacker now imports all files as root:root.
We split the running of rpm scripts between %pre and %post/posttrans as
two different stages. During assembly, we first run the %pre scripts,
collect users and groups, then chown as needed (and then finally run the
%post scripts).
Closes: #462Closes: #561
Approved by: cgwalters
Being able to just reuse metadata is especially helpful when trying to
debug things lower down that path, as well as cuts about 2 mins from the
compose test.
Closes: #561
Approved by: cgwalters
During a deploy operation, we would fetch commit objects from the remote
to resolve the version string. If gpg-verify was turned on, we would
fail to pull them if some of the commits were not signed. This is
because we pulled them in batches. We partially address this by only
fetching the HEAD commit on the first pass. This allows `upgrade`
operations to work just as well as `deploy` operations.
Though there is still an issue if we have to traverse farther back than
when signed commits become unsigned (unless they happen to fall on a
batch boundary). We leave that unsolved for now, since that would likely
require a more complex solution and it's not clear whether it's a real
world issue (signers can just retroactively sign commits).
Copy the gpghome from ostree so that we can test GPG-related cases in
our suite.
Closes: #527Closes: #557
Approved by: cgwalters
Expand the available options in the Rebase() D-Bus method to also have a
"revision" key. Its value has the same semantics as the "revision" key
in the Deploy() method (e.g. the "revision=" and "version=" prefixes are
also supported). Also expand the rebase CLI to allow for specifying the
revision as an additional argument.
This allows users to rebase to a specific version or checksum, rather
than only to the latest. Conceptually, this is the equivalent of doing a
rebase followed by a deploy. I.e. we specify an override-commit in the
origin and expect the same behaviours that apply after a deploy to also
apply here.
Closes: #212Closes: #555
Approved by: cgwalters
In the container build + vagrant test workflow, we have to run `make
vmsync` from the env in which autoconf was run, which is the container.
However, when using git worktrees (which is useful in this scenario to
avoid having to overwrite your local builds) and a CentOS build
container, the git inside is too old to understand worktrees, so let's
avoid invoking git in any of the test harness scripts.
Also make sure to restorecon after installing the new rpm-ostreed.
Closes: #555
Approved by: cgwalters
When running `vagrant ssh-config` from ansible, Vagrant for some reason
still wants to execute the File.write() operation, but fails to do so
because the $PWD is $topsrcdir/vagrant, in which .vagrant does not
exist.
Switch to using the absolute path.
Closes: #555
Approved by: cgwalters
Add a few more tests to exercise some of the treefile options. We do
need to also expand test-basic.sh itself to sanity-check the structure
of a normal ostree compose. That's up next on the list.
Closes: #548
Approved by: cgwalters
This is part of the leak set when doing a treecompose. There's
some that go down into libdnf...will get to that over time.
Closes: #547
Approved by: jlebon
Unsurprisingly, rebooting machines that are running in OpenStack is
not as reliable or as fast as a local VM, which is what vmcheck was
originally written for and tested against.
Replace the:
sleep 2 # give time for port to go down
which is rife with raciness, with a stronger boot_id-based check to
ensure we're in a new boot. Run "sync" before rebooting which sometimes
helps (though I didn't fully investigate why or whether it always helps,
there's probably something more subtle going on underneath). Increase
the timeout to 120s.
Closes: #543
Approved by: cgwalters
So we have some coverage of this before merging. I didn't make a
whole new context for this though, and it's only mildly useful
because we really want to test the daemon...but this is a start.
Closes: #535
Approved by: jlebon
There's issues right now with vmcheck since we switched it over to use
Fedora 25. I'll look into it, but in the meantime, let's make it not
required so we can merge in pending PRs.
Closes: #541
Approved by: cgwalters
This was supposed to be part of the last PR (#537). But GitHub somehow
used an out-of-date PR on that branch when I opened the PR.
Closes: #538
Approved by: cgwalters
Make a dedicated container image for building rpm-ostree so that we save
time and bandwidth on building in all the testsuites. Simplify the new
compose test.
Closes: #537
Approved by: cgwalters
Our current compose tests only use a synthetic `empty.rpm`, but
this really limits usefulness.
Let's make a test suite that requires an internet connection and
downloads Fedora RPMs and does "real" tree composes.
See the updated `tests/README.md` for more information.
This is still a WIP.
Closes: #531
Approved by: jlebon
