IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is one part of #1387 and is prep for a single higher level command
that makes it easier to remove all customizations (layering *and*
overrides).
Closes: #1408
Approved by: cgwalters
Doing `override reset --all` may be a no-op if there are no overrides
currently applied. But we were trying to always print the tree diff
under the assumption that all override invocations have to result in a
new deployment.
Fix this by using the same default deployment check that `upgrade` does
before printing.
Closes: #1407
Approved by: cgwalters
This fixes a painful UX issue where one must use the full NEVRA when
uninstalling a locally layered RPM. Now, one can specify either the
NEVRA or the package name only. Though we still try to interpret the
request first as a NEVRA or a capability.
Closes: #1386Closes: #1400
Approved by: cgwalters
There are a few scenarios today where one might deliver content
to a machine via an external transport. For example, take the
scenario of a single server updated via USB drive. While we
can provide a refspec...what should the remote be? (This gets
into ostree collections). There's nothing really that can
happen when typing `rpm-ostree upgrade` unless the USB stick
is plugged in. That type of scenario should be emphasized
by pinning the commit - the machine is updated via an external
script.
Another case: we're experimenting embedding OSTree commits inside OCI
containers. Here again since rpm-ostree can't understand how to
pull content from containers, it's saner to drop the refspec
bits, and pin to a commit.
Further enhancements will follow to make the admin experience more
obvious.
Closes: #1396
Approved by: jlebon
When I initially added support for local RPM layering (#657), I was
operating under the assumption that there is no reliable way to parse a
NEVRA back to its constituent elements. So we worked around this by
doing lookups in the pkgcache and comparing against branches converted
back to their NEVRAs, which was pretty hacky.
Later on, I learned that you *can* reliably parse a NEVRA back to its
elements because RPM forbids all fields from having a colon `:` and all
fields other than the package name to have a dash `-`. In fact, there is
a helper from `libdnf` to do exactly this.
This patch swaps out the old way of decomposing NEVRAs and converting
NEVRAs to their cache branch notation with a simpler more direct
approach using the helper function from `libdnf`.
Closes: #1395
Approved by: cgwalters
For now all this switch does is turn off the scary warning. We also
tweak the warning to make it clear that this will be required in a
future release.
Closes: #1378
Approved by: cgwalters
Let's modernize and start supporting YAML treefiles. I'll dare make the
sweeping generalization that most people would prefer reading and
writing YAML over JSON.
This takes bits from coreos-assembler[1] that know how to serialize a
YAML file and spit it back out as a JSON and makes it into a shared lib
that we can link against. We could use this eventually for JSON inputs
as well to force a validation check before composing.
If we go this route, we could then turn on `--enable-rust` in FAHC for
now and drop the duplicate code in coreos-assembler.
[1] https://github.com/cgwalters/coreos-assemblerCloses: #1377
Approved by: cgwalters
I was honestly surprised to see this test was running all this time for
CentOS. As cool as it is, this test is really more meant for Fedora.
Closes: #1382
Approved by: jlebon
We were trying to test that doing `override remove` on a layered package
errored out. But the test was bogus since `foo` is a base package here.
Let's just use a brand new package that will actually be layered.
Closes: #1382
Approved by: jlebon
Just part of the continuing breakdown of our testsuites into smaller
pieces for more efficient allocation.
Will add a test case to the `layering-basic-2.sh` in a follow-up commit.
Closes: #1382
Approved by: jlebon
With the new support for pinning deployments, we need to also update
rpm-ostree to clean up the transient state as is now done in the ostree
sysroot upgrader.
This addresses that issue as well as tries to be a little cleaner in how
we clean up other transient state. Notably, we add a new helper function
to `RpmOstreeOrigin` to do this for us and use it in the upgrader. In
other cases, we do want this transient information since it allows us to
describe the deployment.
Closes: https://github.com/ostreedev/ostree/issues/1595Closes: #1372
Approved by: cgwalters
This makes the logs a bit more useful, but the ultimate goal
here is to write the originating client `id` to the cached update
data, so users know that e.g. `gnome-software` triggered it.
Closes: #1368
Approved by: jlebon
Following up to https://github.com/projectatomic/rpm-ostree/pull/1352
AKA 506910d930
which added an experimental flag to globally enable deployment
staging, let's add an `ex-stage` automatic update policy.
I chose to create a new `test-autoupdate-stage.sh` and rename
the previous one to `test-autoupdate-check.sh` in going with
the previous theme of smaller test files; it's
way faster to iterate on new tests when it's a new file. And adding
staging at the top would have been weird.
This was all quite straightforward, just plumbing through lots
of layers.
Closes: #1321
Approved by: jlebon
The common case is having layered packages and no overrides; seeing
`Applying 8 overlays` then `Building filesystem [0/8]` is redundant.
Tweak the progress to avoid the double message. Also change the terminology
to clarify that each item is a package.
Also update libglnx to pull in progress bar newline fix.
Update submodule: libglnx
Closes: #1363
Approved by: jlebon
Follow-up from #1344.
In the case where a cached update is created from an `upgrade` operation
(and soon, "stage" auto-update policy runs), we can just print the diff
and advisory info together with the pending deployment. This makes the
output look much more natural.
Closes: #1350
Approved by: cgwalters
This now works after https://github.com/ostreedev/ostree/pull/1570
However, I was hitting an issue with the temp httpd running the
tests serially, let's split them up.
Really the only sane thing is to run each of these tests in a fresh
VM; we'll do the VM-in-container pattern here hopefully soon.
Closes: #1355
Approved by: jlebon
Now that infrastructure for this has landed in libostree,
let's make it easy for people to opt-in to testing it. This is a distinct first
step for adding it as an update policy.
Closes: #1352
Approved by: jlebon
Right now, cached updates generated during "check" policy runs are
completely decoupled from upgrade operations. This can lead
to the surprising situation where the "Available update" is *older* than
a freshly deployed pending tree with `rpm-ostree upgrade`.
We should just generate a cached update after upgrade operations. This
is also prep for staged deployments, where we'll want to do this as
well.
Note that we write out the cached update here even if automatic updates
are turned off since it's essentially free. I've been thinking about
always displaying that information after an `rpm-ostree upgrade` in
`status`. Though not sure if we should keep it in a separate "Available
update" section, or somehow morph it as part of the pending deployment
output.
Closes: #1344
Approved by: cgwalters
Previously we merged: #1228 AKA 12dc565b00
My recollection is that was working on it the background, while doing
something else, and I clearly didn't get to the point of testing it "for real".
There are many interlocking issues here to make this work. For example,
the "remove RPM" logic needs special handling for the kernel, because
we also inject content into `/usr/lib/ostree-boot` and also generate
the initramfs, etc.
The architecture I chose is to have the core *detect* when a kernel
is changed, and also call into the kernel processing code when removing
a kernel package. But the logic for doing kernel reinstallation client-side
is best alongside the initramfs generation logic which already existed
in the sysroot upgrader.
I extended the test suite to cover what was failing before, and I
tested this interactively. But I'm uncertain about adding a test
for actually *booting* into the GA kernel as it's quite possible
some bits in userspace rely on a newer kernel. Fixing this properly
really wants some infrastructure to better "re-version" an existing
package without changing its content.
Closes: https://github.com/projectatomic/rpm-ostree/issues/1334Closes: #1346
Approved by: jlebon
Now we stop running rpm-ostreed as non-root, which is going to be
a maintenance pain going forward. If we do introduce non-VM based
tests I think we should look to doing in-container testing.
Closes: #1339
Approved by: cgwalters
Building on:
- 9cbec27d4c
- e7a42f70a9
I was looking at a rpm-ostree run that imports a variety of rpmmd-repos,
and information about the source repositories is really useful for determining
the up-to-dateness. We've been capturing this data for a while, it's
about time we started showing it somewhere.
This does make `status --verbose` notably more verbose, but eh, that
seems fine for now.
See also https://github.com/projectatomic/rpm-ostree/issues/774Closes: #1345
Approved by: jlebon
It's very normal for base packages to own directories with
dependent packages installing files there. Doing an rm-rf
for directories was just wrong. Concretely this fixes
an `override replace ./systemd-*.rpm`.
librpm is also pretty conservative here (for good reason)
and just ignores `ENOTEMPTY`, so let's match that.
I opted to split things up so we remove not-directories
in a first pass, then remove all directories we can in the
second. This should maximize our chances of removing what we can
in a scenario where e.g. two co-dependent packages install files
to a directory one of them owns.
Closes: https://github.com/projectatomic/rpm-ostree/issues/1340Closes: #1341
Approved by: jlebon
Following up to: https://github.com/projectatomic/rpm-ostree/pull/1336
It makes sense to keep the library tests as unit tests (although
we should also support doing them installed).
The upgrade-rebase tests will move into vmcheck/ soon.
Closes: #1338
Approved by: jlebon
Our test suite originated when package layering was still being
developed, but now that that's mature, the logic where layering
tests are distinct makes less sense.
The `basic` test had grown to really be a collection of many
miscellaneous things. Let's make that more explicit. Further,
let's avoid having each test suite grow too large; when a single
test fails we don't have an easy way to rerun just that test,
so a crude way to have faster local iteration is to split into groups.
My plan is to reintroduce a `basic` test that covers the basics
of all functionality - update, deploy, layering, etc. The advanced/corner
cases of layering like the `rm -rf /` test would still live in a
`test-layering.sh` or so.
Closes: #1336
Approved by: jlebon
The unit tests run an rpm-ostree daemon as non-root, which worked
surprisingly well for quite a while. But it started failing when
working on a patch which adds caching that writes to `/var`.
Since we have the vmcheck system now, let's switch over to that.
This PR moves the random "basic" tests we'd accumulated like
one to verify `StateRoot` is only in `status --verbose`, but not
the tests for the `rebase` command etc.
Closes: #1336
Approved by: jlebon
We should be checking that there are no requested base replacements
here, not removals. This was likely a copy-paste slip-up from copying
the override-remove tests. I still kept those checks for sanity, and
just tacked on the correct ones.
Closes: #1323
Approved by: cgwalters
This fixes a small regression from #852 which prevented inactive
overrides to be reset. Which is funny, because that's exactly the most
likely time when you would want to reset an override.
Basically, the `!is_layered --> no overrides` doesn't make sense for
inactive overrides. I suspect most people worked around this by just
using `reset --all`.
Closes: #1323
Approved by: cgwalters
When juggling multiple test VMs for different purposes, it's useful to
be able to easily e.g. `make vmcheck` a specific one by overriding the
ssh-config file to use, rather than editing the latter each time.
Closes: #1324
Approved by: cgwalters
I was trying a `--ex-unified-core` compose of FAW, and things fell over
on `urw-base35-fonts` which does a dance of setting a stamp file in
`%post` and checking it in `%posttrans`.
This whole pattern should be considered deprecated by file triggers. But let's
support it for now.
Note there's a lot of parameter passing as we need a single directory which is
held across multiple script invocations.
Closes: #1319
Approved by: jlebon
Specifically in this case, this allows us to close a race condition
during `upgrade --check` where the `CachedUpdate` property might not
have been updated yet when we read it after finishing the transaction.
Closes: #1311
Approved by: cgwalters
In this PR: https://github.com/projectatomic/rpm-ostree/pull/1309
I was hitting race conditions running `ostree admin pin` then
`rpm-ostree cleanup` as it was possible that the daemon hadn't handled
the inotify on the sysroot and reloaded the deployment state before
the txn request came in.
Close this race by doing an implicit `reload` before starting a txn.
This is a pretty efficient operation because for the sysroot we're
just doing a `stat()` and comparing mtime.
Implementation wise, change the external API to drop the "did change"
boolean as nothing outside of the `sysroot.c` file used it.
A followup to this would be changing the `status` CLI to call a
(new) DBus API like `RequestReload` that at least did the sysroot
reload if the daemon was otherwise idle or so? And it'd be available
to unprivileged users.
Closes: #1311
Approved by: cgwalters
Moving to caching the GVariant to disk rather than during RPMOSTreeOS
reloads broke the legacy `DownloadUpdateRpmDiff` path because it relied
on the implied recalculations that occur on reloads to update
`CachedUpdate`.
This patch series was initially going to be about just migrating all the
legacy APIs to make use of the new metadata, which would have fixed this
properly. But we first need some real coverage in that aread, which is
very poor right now. I'd like to investigate integrating the Cockpit
tests (at least the ostree-specific parts) into our CI to remedy this.
Anyways, for now at least, let's fix Cockpit.
Closes: #1300Closes: #1303
Approved by: cgwalters
This patch teaches `db list` to also use the pkglist metadata when it
can, just like we did for `db diff`. To spell it out: this then allows
`db list` to work on commits for which we only have the commit object.
I went for the surgical incision here and didn't try to support
invocations which use fnmatch patterns for now. Definitely possible,
though it didn't feel like it was worth the effort given that the common
case is just a raw `db list` (I'd wager most people are probably
hard-wired to pipe to `grep` anyway for filtering).
Also fix the usage string, which had the arguments flipped.
Closes: #1299
Approved by: cgwalters
Support a `--base` switch to perform the diff on the base layer if
deployment checksum was locally composed. This is useful to filter out
from the diff changes due to layered packages.
Closes: #1299
Approved by: cgwalters
Because otherwise, there's no way to see the output of the script.
Also, turn off `gather_facts` since in the majority of cases, we don't
need it, so let's avoid the overhead. We can make this an opt-in flag
later on if needed.
Closes: #1304
Approved by: cgwalters
This came up in a few places recently; it happens for RHEL in some
cases, and in general we don't want to completely fail the daemon
start if someone messes up their remote config.
Closes: https://github.com/projectatomic/rpm-ostree/issues/1301Closes: #1302
Approved by: jlebon
This adds a shell primitive to make it easy to execute a playbook
task list.
The big picture idea is to sync with https://github.com/ostreedev/ostree/pull/1462
and rewrite some of the libvm shell stuff as playbooks, allowing easier
code sharing with a-h-t and just in general being a better library for
talking ssh and executing commnads.
Closes: #1297
Approved by: jlebon
This is a logical followup to:
- "core: Add rpmostree.repo metadata to imported packages" AKA a52cb7d78e
- "compose: Add rpmostree.rpmmd-repo metadata to commits by default" AKA e7a42f70a9
Basically I'd like to display this in `status` at least, though how we render it
gets...interesting when there is layering in play. For now though let's just
capture the data the same way we do server side.
Theoretically we could reconstruct this data by walking all of the pkgrefs in
the tree but...ugh. It's just a lot simpler to have it in this form too just
like the server-side path.
Closes: #1296
Approved by: jlebon
Very often when I have a pending deployment, I just want to find out
what the diff is before rebooting. We do print it after whatever
transaction laid down the new deployment, though we may not reboot right
away. It seems like a common enough operation to warrant some shortcuts.
This makes `db diff` more useful by automatically subbing in the booted
deployment if less arguments are given:
rpm-ostree db diff
<diff booted and pending deployment>
rpm-ostree db diff $csum
<diff booted and $csum>
rpm-ostree db diff $csum1 $csum2
<as before, diff $csum1 and $csum2>
As before, we never try to even load the sysroot in the last invocation,
so it still works equally well on non-OSTree systems/unprivileged.
Closes: #1294
Approved by: cgwalters
