IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
si_register_applet() and si_applet_release() are renamed
cs_register_applet() and cs_applet_release() and now manipulate a
conn-stream instead of a stream-inteface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
Some conn-stream functions are only used when there is a connection. Thus,
they was renamed with "cs_conn_" prefix. In addition, we expect to have a
connection, so a BUG_ON is added to be sure the functions are never called
in another context.
wait_event structure is moved in the conn-stream. The tasklet is only
created if the conn-stream is attached to a mux and released when the mux is
detached. This implies a subtle change. In stream_int_chk_rcv() function,
the wakeup of the tasklet was removed because there is no longer tasklet at
this stage (stream_int_chk_rcv() is a callback function of si_embedded_ops).
To be able to move wait_event from the stream-interface to the conn-stream,
we must be prepare to handle errors when a mux is attached to a conn-stream.
Indeed, the wait_event's tasklet will be allocated when both a mux and a
stream will be both attached to a stream. So, we must be prepared to handle
allocation errors.
These flags only concerns the connection part. In addition, it is required
for a next commit, to avoid circular deps. Thus CS_SHR_* and CS_SHW_* were
renamed with the "CO_" prefix.
si_connect() is moved in backend.c and renamed as do_connect_server(). In
addition, the function now manipulate a stream instead of a
stream-interface.
si_retnclose() is used to send a reply to a client before closing. There is
no use on the server side, in spite of the function is generic. Thus, it is
renamed stream_retnclose() and moved into the stream scope. The function now
handle a stream and explicitly send a message to the client.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
The previous connection state on the client side was only used for debugging
purpose to report client close. But this may be handled when the client
stream-interface is switched from SI_ST_DIS to SI_ST_CLO.
So, there only remains the previous connection state on the server side that
is used by the stream, in process_stream(), to be able to set the correct
termination flags. Thus, instead of keeping this info in the
stream-interface for only one side, the info is now stored in the stream
itself.
Flag to get the source ip/port with getsockname is now handled at the stream
level. Thus SI_FL_SRC_ADDR stream-int flag is replaced by SF_SRC_ADDR stream
flag.
Flag to consider a stream as indepenent is now handled at the conn-stream
level. Thus SI_FL_INDEP_STR stream-int flag is replaced by CS_FL_INDEP_STR
conn-stream flags.
Flag to not wake the stream up on I/O is now handled at the conn-stream
level. Thus SI_FL_DONT_WAKE stream-int flag is replaced by CS_FL_DONT_WAKE
conn-stream flags.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
Instead of setting a stream-interface flag to then set the corresponding
conn-stream endpoint flag, we now only rely the conn-stream endoint. Thus
SI_FL_KILL_CON is replaced by CS_EP_KILL_CONN.
In addition si_must_kill_conn() is replaced by cs_must_kill_conn().
Instead of relying on the conn-stream error, via CS_FL_ERR flags, we now
directly use the error at the endpoint level with the flag CS_EP_ERROR. It
should be safe to do so. But we must be careful because it is still possible
that an error is processed too early. Anyway, a conn-stream has always a
valid endpoint, maybe detached from any endpoint, but valid.
SI_FL_ERR is removed and replaced by CS_FL_ERROR. It is a transient patch
because the idea is to rely on the endpoint to handle errors at this
level. But if for any reason it is not possible, the stream-interface flags
will still be replaced.
The expiration date in the stream-interface was only used on the server side
to set the connect, queue or turn-around timeout. It was checked on the
frontend stream-interface, but never used concretely. So it was removed and
replaced by a connect expiration date in the stream itself. Thus, SI_FL_EXP
flag in stream-interfaces is replaced by a stream flag, SF_CONN_EXP.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
The conn_retries counter was set to the max value and decremented at each
connection retry. Thus the counter reflected the number of retries left and
not the real number of retries. All calculations of redispatch or reporting
of number of retries experienced were made using subtracts from the
configured retries, which was complicated and didn't bring any benefit.
Now, this counter is set to 0 and incremented at each retry. We know we've
reached the maximum allowed connection retries by comparing it to the
configured value. In all other cases, we directly use the counter.
This patch should address the feature request #1608.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
The L7 retries only concerns the stream when a server connection is
established. Thus instead of storing the L7 buffer into the
stream-interface, it may be moved to the stream. And because it is only
available for HTTP streams, it may be moved in the HTTP transaction.
Associated flags are also moved into the HTTP transaction.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
cs_utils.h header file will contain all util functions related to the
conn_streams. For now, few functions were added, all are equivalent to SI
functions. Idea is to progressively replace SI functions by CS ones.
CS_FL_ISBACK is a new flag, set on backend conn-streams. We must just be
careful to preserve this flag when the endpoint is detached from the
conn-stream.
Instead of testing if a conn-stream exists or not, we rely on CS_EP_ORPHAN
endpoint flag. In addition, if possible, we access the endpoint from the
mux_pt context. Finally, the endpoint flags are now reported in trace
messages.
All old flags CS_FL_* are now moved in the endpoint scope and renamed
CS_EP_* accordingly. It is a systematic replacement. There is no true change
except for the health-check and the endpoint reset. Here it is a bit special
because the same conn-stream is reused. Thus, we must handle endpoint
allocation errors. To do so, cs_reset_endp() has been adapted.
Thanks to this last change, it will now be possible to simplify the
multiplexer and probably the applets too. A review must also be performed to
remove some flags in the channel or the stream-interface. The HTX will
probably be simplified too. Finally, there is now some place in the
conn-stream to move info from the stream-interface.
The conn-stream endpoint is now shared between the conn-stream and the
applet or the multiplexer. If the mux or the applet is created first, it is
responsible to also create the endpoint and share it with the conn-stream.
If the conn-stream is created first, it is the opposite.
When the endpoint is only owned by an applet or a mux, it is called an
orphan endpoint (there is no conn-stream). When it is only owned by a
conn-stream, it is called a detached endpoint (there is no mux/applet).
The last entity that owns an endpoint is responsible to release it. When a
mux or an applet is detached from a conn-stream, the conn-stream
relinquishes the endpoint to recreate a new one. This way, the endpoint
state is never lost for the mux or the applet.
It is a transient commit to prepare next changes. Now, when a conn-stream is
created from an applet or a multiplexer, an endpoint is always provided. In
addition, the API to create a conn-stream was specialized to have one
function per type.
The next step will be to share the endpoint structure.
It is a transient commit to prepare next changes. It is possible to pass a
pre-allocated endpoint to create a new conn-stream. If it is NULL, a new
endpoint is created, otherwise the existing one is used. There no more
change at the conn-stream level.
In the applets, all conn-stream are created with no pre-allocated
endpoint. But for multiplexers, an endpoint is systematically created before
creating the conn-stream.
Some CS flags, only related to the endpoint, are moved into the endpoint
struct. More will probably moved later. Those ones are not critical. So it
is pretty safe to move them now and this will ease next changes.
Group the endpoint target of a conn-stream, its context and the associated
flags in a dedicated structure in the conn-stream. It is not inlined in the
conn-stream structure. There is a dedicated pool.
For now, there is no complexity. It is just an indirection to get the
endpoint or its context. But the purpose of this structure is to be able to
share a refcounted context between the mux and the conn-stream. This way, it
will be possible to preserve it when the mux is detached from the
conn-stream.
The function cs_init() is only called by cs_new(). The conn-stream
initialization will be reviewed. It is easier to do it in cs_new() instead
of using a dedicated function. cs_new() is pretty simple, there is no reason
to split the code in this case.
This change is only significant for the multiplexer part. For the applets,
the context and the endpoint are the same. Thus, there is no much change. For
the multiplexer part, the connection was used to set the conn-stream
endpoint and the mux's stream was the context. But it is a bit strange
because once a mux is installed, it takes over the connection. In a
wonderful world, the connection should be totally hidden behind the mux. The
stream-interface and, in a lesser extent, the stream, still access the
connection because that was inherited from the pre-multiplexer era.
Now, the conn-stream endpoint is the mux's stream (an opaque entity for the
conn-stream) and the connection is the context. Dedicated functions have
been added to attached an applet or a mux to a conn-stream.
The appctx owner is now always a conn-stream. Thus, it can be set during the
appctx allocation. But, to do so, the conn-stream must be created first. It
is not a problem on the server side because the conn-stream is created with
the stream. On the client side, we must take care to create the conn-stream
first.
This change should ease other changes about the applets bootstrapping.
This patch is mandatory to invert the endpoint and the context in the
conn-stream. There is no common type (at least for now) for the entity
representing a mux (h1s, h2s...), thus we must set its type when the
endpoint is attached to a conn-stream. There is 2 types for the conn-stream
endpoints: the mux (CS_FL_ENDP_MUX) and the applet (CS_FL_ENDP_APP).
For now there is no much change. Only the appctx is passed as argument when
the .init callback function is called. And it is not possible to yield at
this stage. It is not a problem because the feature is not used. Only the
lua defines this callback function for the lua TCP/HTTP services. The idea
is to be able to use it for all applets to initialize the appctx context.
cs_free() must not be called when we fail to allocate the conn-stream in
h1s_new_cs() function. This bug was introduced by the commit cda94accb
("MAJOR: stream/conn_stream: Move the stream-interface into the
conn-stream").
It is 2.6-specific, no backport is needed.
It was mentioned in issue #12 that expired entries would appear with a
negative expire delay in "show cache". Instead of listing them, let's
just evict them.
This could be backported to all versions since this was reported on
1.8 already.
It was reported in issue #13 that a GOAWAY frame was sent on timeout even
if no SETTINGS frame was sent. The approach imagined by then was to track
the fact that a SETTINGS frame was already sent to avoid this, but that's
already what is done through the state, though it doesn't stand due to the
fact that we switch the frame to the error state. Thus instead what we're
doing here is to instead set the GOAWAY_FAILED flag in h2c_error() before
switching to the ERROR state when the state indicates we've not yet sent
settings, and refrain from sending anything from the h2c_send_goaway_error()
function for such states.
This could be backported to all versions where it applies well.
