IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
While trying to debug a failure of virpcitest during 'make distcheck',
I noticed that with a VPATH build, 'cd tests; ./virpcitest' fails for
an entirely different reason. To reproduce the distcheck failure, I
had to run 'cd tests; abs_srcdir=/path/to/src ./virpcitest'. But we
document in HACKING that all of our tests are supposed to be runnable
without requiring extra environment variables.
The solution: hardcode the location of srcdir into the just-built
binaries, rather than requiring make to prepopulate environment
variables. With this, './virpcitest' passes even in a VPATH build
(provided that $(srcdir) is writable; a followup patch will fix the
conditions required by 'make distcheck'). [Note: the makefile must
still pass on directory variables to the test environment of shell
scripts, since those aren't compiled. So while this solves the case
of a compiled test, it still requires environment variables to pass
a VPATH build of any shell script test case that relies on srcdir.]
* tests/Makefile.am (AM_CFLAGS): Define abs_srcdir in all compiled
tests.
* tests/testutils.h (abs_srcdir): Quit declaring.
* tests/testutils.c (virtTestMain): Rely on define rather than
environment variable.
* tests/virpcimock.c (pci_device_new_from_stub): Rely on define.
* tests/cputest.c (mymain): Adjust abs_top_srcdir default.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxmlnstest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When attempting to backport gluster pools to an older versoin
where there is no VIR_STRDUP, I got a crash from calling
strdup(,NULL). Rather than relying on the current else branch
safely doing nothing when there is no fd, it is easier to just
skip it. While at it, there's no need to explicitly set
perms.label to NULL after a VIR_FREE().
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Minor optimization.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virsh command 'domxml-to-native' (virConnectDomainXMLToNative())
converts all network devices to "type='ethernet'" in order to make it
more likely that the generated command could be run directly from a
shell (other libvirt network device types end up referencing file
descriptors for tap devices assumed to have been created by libvirt,
which can't be done in this case).
During this conversion, all of the netdev parameters are cleared out,
then specific items are filled in after changing the type. The MAC
address was not one of these preserved items, and the result was that
mac addresses in the generated commandlines were always
00:00:00:00:00:00.
This patch saves the mac address before the conversion, then
repopulates it afterwards, so the proper mac addresses show up in the
commandline.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Commit 348b4e2 introduced a potential problem (thankfully not
in any release): we are attempting to use virFileReadHeaderFD()
on a file that was opened with O_NONBLOCK. While this
shouldn't be a problem in practice (because O_NONBLOCK
typically doesn't affect regular or block files, and fifos and
sockets cannot be storage volumes), it's better to play it safe
to avoid races from opening an unexpected file type while also
avoiding problems with having to handle EAGAIN while read()ing.
Based on a report by Dan Berrange.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Fix up fd after avoiding race.
Signed-off-by: Eric Blake <eblake@redhat.com>
Also after commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to umount the mounts that
inherited from parent mountns.
right now, I have no good idea to fix this problem, we need
to do more research. this patch just skip unmounting these
mounts for shared root.
BTW, I think when libvirt lxc enables user namespace, the
configuation that shares root with host is very rara.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
After kernel commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to move the mounts that
inherited from parent mountns. we use this feature to move
the /stateDir/domain-name.{dev, devpts} to the /dev/ and
/dev/pts directroy of container. this commit breaks libvirt lxc.
this patch changes the behavior to bind these mounts when
user namespace is enabled and move these mounts when user
namespace is disabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
With some authentication mechanism (PLAIN for example), sasl_client_start()
can return SASL_OK, which translates to virNetSASLSessionClientStart()
returning VIR_NET_SASL_COMPLETE.
cyrus-sasl documentation is a bit vague as to what to do in such situation,
but upstream clarified this a bit in
http://asg.andrew.cmu.edu/archive/message.php?mailbox=archive.cyrus-sasl&msg=10104
When we got VIR_NET_SASL_COMPLETE after virNetSASLSessionClientStart() and
if the remote also tells us that authentication is complete, then we should
end the authentication procedure rather than forcing a call to
virNetSASLSessionClientStep(). Without this patch, when trying to use SASL
PLAIN, I get:
error :authentication failed : Failed to step SASL negotiation: -1
(SASL(-1): generic failure: Unable to find a callback: 32775)
This patch is based on a spice-gtk patch by Dietmar Maurer.
virNetSASLSessionClientStep logs the data that is going to be passed to
sasl_client_step as input data. However, it tries to log it as a string,
while there is no guarantee that this data is going to be nul-terminated.
This leads to this valgrind log:
==20938== Invalid read of size 1
==20938== at 0x8BDB08F: vfprintf (vfprintf.c:1635)
==20938== by 0x8C06DF2: vasprintf (vasprintf.c:62)
==20938== by 0x4CCEDF9: virVasprintfInternal (virstring.c:337)
==20938== by 0x4CA9516: virLogVMessage (virlog.c:842)
==20938== by 0x4CA939A: virLogMessage (virlog.c:778)
==20938== by 0x4E21E0D: virNetSASLSessionClientStep (virnetsaslcontext.c:458)
==20938== by 0x4DE47B8: remoteAuthSASL (remote_driver.c:4136)
==20938== by 0x4DE33AE: remoteAuthenticate (remote_driver.c:3635)
==20938== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==20938== by 0x4DDC8BA: remoteConnectOpen (remote_driver.c:1027)
==20938== by 0x4D8595F: do_open (libvirt.c:1239)
==20938== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==20938== by 0x12762B: vshReconnect (virsh.c:337)
==20938== by 0x12C9B0: vshInit (virsh.c:2470)
==20938== by 0x12E9A5: main (virsh.c:3338)
==20938== Address 0xe329ccd is 0 bytes after a block of size 141 alloc'd
==20938== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20938== by 0x8CB91B4: xdr_array (xdr_array.c:94)
==20938== by 0x4E039C2: xdr_remote_auth_sasl_start_ret (remote_protocol.c:3134)
==20938== by 0x4E1F8AA: virNetMessageDecodePayload (virnetmessage.c:405)
==20938== by 0x4E119F5: virNetClientProgramCall (virnetclientprogram.c:377)
==20938== by 0x4DF8141: callFull (remote_driver.c:5794)
==20938== by 0x4DF821A: call (remote_driver.c:5816)
==20938== by 0x4DE46CF: remoteAuthSASL (remote_driver.c:4112)
==20938== by 0x4DE33AE: remoteAuthenticate (remote_driver.c:3635)
==20938== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==20938== by 0x4DDC8BA: remoteConnectOpen (remote_driver.c:1027)
==20938== by 0x4D8595F: do_open (libvirt.c:1239)
==20938== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==20938== by 0x12762B: vshReconnect (virsh.c:337)
==20938== by 0x12C9B0: vshInit (virsh.c:2470)
==20938== by 0x12E9A5: main (virsh.c:3338)
The array of sasl_callback_t callbacks which is passed to sasl_client_new()
must be kept alive as long as the created sasl_conn_t object is alive as
cyrus-sasl uses this structure internally for things like logging, so
the memory used for callbacks must only be freed after sasl_dispose() has
been called.
During testing of successful SASL logins with
virsh -c qemu+tls:///system list --all
I've been getting invalid read reports from valgrind
==9237== Invalid read of size 8
==9237== at 0x6E93B6F: _sasl_getcallback (common.c:1745)
==9237== by 0x6E95430: _sasl_log (common.c:1850)
==9237== by 0x16593D87: digestmd5_client_mech_dispose (digestmd5.c:4580)
==9237== by 0x6E91653: client_dispose (client.c:332)
==9237== by 0x6E9476A: sasl_dispose (common.c:851)
==9237== by 0x4E225A1: virNetSASLSessionDispose (virnetsaslcontext.c:678)
==9237== by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237== by 0x4E254D1: virNetSocketDispose (virnetsocket.c:1042)
==9237== by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237== by 0x4E2701C: virNetSocketEventFree (virnetsocket.c:1794)
==9237== by 0x4C965D3: virEventPollCleanupHandles (vireventpoll.c:583)
==9237== by 0x4C96987: virEventPollRunOnce (vireventpoll.c:652)
==9237== by 0x4C94730: virEventRunDefaultImpl (virevent.c:274)
==9237== by 0x12C7BA: vshEventLoop (virsh.c:2407)
==9237== by 0x4CD3D04: virThreadHelper (virthreadpthread.c:161)
==9237== by 0x7DAEF32: start_thread (pthread_create.c:309)
==9237== by 0x8C86EAC: clone (clone.S:111)
==9237== Address 0xe2d61b0 is 0 bytes inside a block of size 168 free'd
==9237== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9237== by 0x4C73827: virFree (viralloc.c:580)
==9237== by 0x4DE4BC7: remoteAuthSASL (remote_driver.c:4219)
==9237== by 0x4DE33D0: remoteAuthenticate (remote_driver.c:3639)
==9237== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==9237== by 0x4DDC8DC: remoteConnectOpen (remote_driver.c:1031)
==9237== by 0x4D8595F: do_open (libvirt.c:1239)
==9237== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==9237== by 0x12762B: vshReconnect (virsh.c:337)
==9237== by 0x12C9B0: vshInit (virsh.c:2470)
==9237== by 0x12E9A5: main (virsh.c:3338)
This commit changes virNetSASLSessionNewClient() to take ownership of the SASL
callbacks. Then we can free them in virNetSASLSessionDispose() after the corresponding
sasl_conn_t has been freed.
When testing SASL authentication over TLS with
virsh -c qemu+tls:///system list --all
I got this valgrind trace after entering wrong credentials:
==30540== 26,903 (88 direct, 26,815 indirect) bytes in 1 blocks are definitely lost in loss record 289 of 293
==30540== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==30540== by 0x4C7379A: virAllocVar (viralloc.c:558)
==30540== by 0x4CBC178: virObjectNew (virobject.c:190)
==30540== by 0x4CBC329: virObjectLockableNew (virobject.c:216)
==30540== by 0x4E2D003: virNetTLSContextNew (virnettlscontext.c:719)
==30540== by 0x4E2DC3F: virNetTLSContextNewPath (virnettlscontext.c:930)
==30540== by 0x4E2DD5B: virNetTLSContextNewClientPath (virnettlscontext.c:957)
==30540== by 0x4DDB618: doRemoteOpen (remote_driver.c:627)
==30540== by 0x4DDC8BA: remoteConnectOpen (remote_driver.c:1031)
==30540== by 0x4D8595F: do_open (libvirt.c:1239)
==30540== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==30540== by 0x12762B: vshReconnect (virsh.c:337)
==30540== by 0x12C9B0: vshInit (virsh.c:2470)
==30540== by 0x12E9A5: main (virsh.c:3338)
You'd think I'd learn to actually COMMIT my working tree
between testing that a last-minute fix compiles and pushing.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Typo fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Putting together pieces from previous patches, it is now possible
for 'virsh vol-dumpxml --pool gluster volname' to report metadata
about a qcow2 file stored on gluster. The backing file is still
treated as raw; to fix that, more patches are needed to make the
storage backing chain analysis recursive rather than halting at
a network protocol name, but that work will not need any further
calls into libgfapi so much as just reusing this code, and that
should be the only code outside of the storage driver that needs
any help from libgfapi. Any additional use of libgfapi within
libvirt should only be needed for implementing storage pool APIs
such as volume creation or resizing, where backing chain analysis
should be unaffected.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterReadHeader): New helper function.
(virStorageBackendGlusterRefreshVol): Probe non-raw files.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, dangling and looping symlinks are silently
ignored, while links to files and directories are treated the
same as the underlying file or directory. This is the same
behavior as both 'directory' and 'netfs' pools.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Treat symlinks similar to
directory and netfs pools.
Signed-off-by: Eric Blake <eblake@redhat.com>
We already had code for handling allocation different than
capacity for sparse files; we just had to wire it up to be
used when inspecting gluster images.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Handle no fd.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Handle sparse files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Take advantage of the previous patch's addition of 'netdir' as
a distinct volume type, to expose rather than silently skip
directories embedded in a gluster pool. Also serves as an XML
validation for the previous patch.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Don't skip directories.
* tests/storagevolxml2xmltest.c (mymain): Add test.
* tests/storagevolxml2xmlin/vol-gluster-dir.xml: New file.
* tests/storagevolxml2xmlout/vol-gluster-dir.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually put gfapi to use, by allowing the creation of a gluster
pool. Right now, all volumes are treated as raw and directories
are skipped; further patches will allow peering into files to
allow for qcow2 files and backing chains, and reporting proper
volume allocation. This implementation was tested against Fedora
19's glusterfs 3.4.1; it might be made simpler by requiring a
higher minimum, and/or require more hacks to work with a lower
minimum.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshPool): Initial implementation.
(virStorageBackendGlusterOpen, virStorageBackendGlusterClose)
(virStorageBackendGlusterRefreshVol): New helper functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add support for a new <pool type='gluster'>, similar to
RBD and Sheepdog. Terminology wise, a gluster volume
forms a libvirt storage pool, within the gluster volume,
individual files are treated as libvirt storage volumes.
* docs/schemas/storagepool.rng (poolgluster): New pool type.
* docs/formatstorage.html.in: Document gluster.
* docs/storage.html.in: Likewise, and contrast it with netfs.
* tests/storagepoolxml2xmlin/pool-gluster.xml: New test.
* tests/storagepoolxml2xmlout/pool-gluster.xml: Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
I got annoyed at having to use both 'virsh vol-list $pool --details'
AND 'virsh vol-dumpxml $vol $pool' to learn if I had populated
the volume correctly. Since two-thirds of the data present in
virStorageVolGetInfo() already appears in virStorageVolGetXMLDesc(),
this just adds the remaining piece of information, as:
<volume type='...'>
...
</volume>
* docs/formatstorage.html.in: Document new <volume type=...>.
* docs/schemas/storagevol.rng (vol): Add it to RelaxNG.
* src/conf/storage_conf.h (virStorageVolTypeToString): Declare.
* src/conf/storage_conf.c (virStorageVolTargetDefFormat): Output
the metatype.
(virStorageVolDefParseXML): Parse it, for unit tests.
* tests/storagevolxml2xmlout/vol-*.xml: Update tests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'docs/examples' code was long ago removed and now the
python code was gone too, the custom 'tests' makefile target
serves no purpose
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous attempt (commit d65e0e1) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)
https://bugzilla.redhat.com/show_bug.cgi?id=962225
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new volume from handwritten XML.
(Compare also to commit caf516db for pools).
* docs/schemas/storagevol.rng: Support interleaving.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I didn't find any other instances with:
git grep '1\.1\.5'
* src/test/test_driver.c (testDriver): Tweak version info.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefile.am, vbox_V4_3.c and vbox_driver.c do regular
modifitions to support a new version of APIs.
vbox_tmpl.c basically fixes incompatibilities since 4.2.
The affected incompatibilities of 4.3 are:
* IMachine::Delete() has been renamed to IMachine::deleteConfig()
* IMedium::CreateBaseStorage() now accepts multiple variant values
* IDisplay::GetScreenResolution() now returns the display position
in the guest
* IMachine now has multiple IUSBControllers and IUSBDeviceFilters
handles USB device filters instead of (obsolete) IUSBController
This patch is tested on Mac OS X 10.8.5 and Fedora 19.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The USB-related code in vboxDomainGetXMLDesc is deeply nested and
difficult to add new code. So flatten it. To do so, the code is
pulled out from vboxDomainGetXMLDesc to make the function short
and to leaverage early return and goto for error handling.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Among others, this fixes getgroups for MacOS and fpending for
DragonFly BSD.
* .gnulib: Update to latest.
Signed-off-by: Eric Blake <eblake@redhat.com>
This reverts commit 6b90d7428d.
The original problem was that libvirt_virConnectGetCPUModelNames
was listed twice in the exports table, once automatically from
the generator and once from the manual override. We merely needed
to list it in the skip_impl list, and not delete the manually
written code entirely.
This nested job is canceled by the first ExitMonitor call (even though
it was not created by the corresponding EnterMonitor call), and
again in qemuMigrationPrepareAny if qemuProcessStart failed.
This can lead to a crash if the vm object was disposed of before calling
qemuDomainRemoveInactive:
0 ..62bc in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7ffce4cdd270) at util/virobject.c:166
1 ..6666 in virObjectIsClass at util/virobject.c:362
2 ..66b4 in virObjectLock at util/virobject.c:314
3 ..477e in virDomainObjListRemove at conf/domain_conf.c:2359
4 ..7a64 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2087
5 ..956c in qemuMigrationPrepareAny at qemu/qemu_migration.c:2469
This was added by commit e4e2822, exposed by 5a4c237 and c7ac251.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
Restarting an active libvirt-guests.service is the equivalent of
doing:
/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start
Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.
Just drop the try-restart attempt, I don't know what purpose it
serves anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=962225
https://bugzilla.redhat.com/show_bug.cgi?id=1033614
As virt-login-shell is an SUID binary, we should restrict its usage to
just the users chosen by an administrator to use virt-login-shell as
their login shell. This can easily be done by making the binary
executable only by users from a new virtlogin group.
https://bugzilla.redhat.com/show_bug.cgi?id=744967
If a domain is rebooting and a migrate API is called meanwhile we would
have to transfer the fakeReboot attribute to the destination in order to
prevent domain doing plain shutdown over there. We shouldn't try to do
anything clever about it other than documenting this as a known
limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Older xmllint version don't allow such characters in datatype anyURI.
In order not to change too much, I'm suggesting making a choice of
anyURI or 'absPathName' which should be fine (checked with upstream
and that old xmllint, both work fine).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit de51dc9c9a primarily added
virConnectGetCPUModelNames as libvirt.getCPUModelNames(conn, arch)
instead of libvirt.virConnect.getCPUModelNames(arch) so revert the code
that does the former while leaving the code that does the later.
This is the rest of the patch that was ACK'd by Dan but I committed only
the partial patch in 6a8b8ae.
Commit de51dc9c9a primarily added
virConnectGetCPUModelNames as libvirt.getCPUModelNames(conn, arch)
instead of libvirt.virConnect.getCPUModelNames(arch) so revert the code
that does the former while leaving the code that does the later.
If a SCSI hostdev is included in an initial domain XML, without a
corresponding controller statement, one is created silently when the
guest is booted.
When hotplugging a SCSI hostdev, a presumption is that the controller
is already present in the domain either from the original XML, or via
an earlier hotplug.
[root@xxxxxxxx ~]# cat disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='3' unit='1088438288'/>
</source>
</hostdev>
[root@xxxxxxxx ~]# virsh attach-device guest01 disk.xml
error: Failed to attach device from disk.xml
error: internal error: unable to execute QEMU command 'device_add': Bus 'scsi0.0' not found
Since the infrastructure is in place, we can also create a controller
silently for use by the hotplugged hostdev device.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
For systems without a PCI bus, attaching a SCSI controller fails:
[root@xxxxxxxx ~]# cat controller.xml
<controller type='scsi' model='virtio-scsi' index='0' />
[root@xxxxxxxx ~]# virsh attach-device guest01 controller.xml
error: Failed to attach device from controller.xml
error: XML error: No PCI buses available
A similar problem occurs with the detach of a controller:
[root@xxxxxxxx ~]# virsh detach-device guest01 controller.xml
error: Failed to detach device from controller.xml
error: operation failed: controller scsi:0 not found
The qemuDomainXXtachPciControllerDevice routines made assumptions
that any caller had a PCI bus. These routines now selectively calls
PCI functions where necessary, and assigns the device information
type to one appropriate for the bus in use.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
