1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 01:34:11 +03:00
Commit Graph

31510 Commits

Author SHA1 Message Date
Erik Skultety
0d5244cc86 tests: Introduce negative versions of DO_TEST_CAPS_LATEST
It's fairly easy to forget to add a capability to the list of
capabilities for a negative test case which might yield (for us) very
unfortunate results. Therefore, introduce negative versions of
DO_TEST_CAPS_LATEST macros, so that real QEMU caps can be used with
tests that expect a failure too.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-12-12 15:12:35 +01:00
Erik Skultety
88d24aaccc conf: domain: Introduce virDomainDeviceIterateFlags
Validation of domain devices is accomplished via a generic device
iterator which takes a callback, iterates over all kinds of supported
device types and invokes the callback on every single device. However,
there might be cases when we need to alter the behaviour of the
iteration (most notably skip or include a group of devices). Therefore,
this patch introduces iterator flags.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-12-12 15:12:35 +01:00
Erik Skultety
414c51b7a1 qemu: domain: gfx: Fix shadowing of a function argument in validation
Since the code was never run, it would have been very hard to spot this
mistake, especially since the compiler can't really warn about it.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-12-12 15:12:35 +01:00
Julio Faracco
daf4e2abca tests: Adding test case to include multiple network definitions.
This commit includes a test case for multiple network definitions. It is
useful right now, but it will be more useful when the index used by LXC
version 3.X is implemented to support this new settings. The version 3.X
is using indexes to specify each network settings.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-11 15:03:08 -05:00
Julio Faracco
53762677a8 lxc: Initializing IPv6 and IPv4 gateway to overwrite old settings.
This commit fixes a bug when you have multiple network settings defined.
Basically, if you set an IPv6 or IPv4 gateway, it carries on next
network settings. It is happening because the data is not being
initialized when a new network type is defined. So, the old data still
persists into the pointer. Another way to initialized the data was
introduced using memset() to avoid missing attributes from the struct.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-12-11 15:02:56 -05:00
Daniel P. Berrangé
34eca98522 tools: rename S_ORG to C_ORG in virt-pki-validate
Rename a variable to make it clear that it holds the client organization
rather than the server organization.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-11 14:58:43 +00:00
Daniel P. Berrangé
ecf8619430 tools: relax x509 Subject regexes to allow numbers and more
The virt-pki-validate tool is extracting components in the x509
certificate Subject field. Unfortunately the regex it is is using is far
too strict, and so truncating valid data. It needs to consider ',' as a
field separator, and if that's not there take all data until the EOL.

With the broken regex:

$ echo "  Subject: O=Test,CN=guestHyp1ver"  | sed 's+.*CN=\(.[a-zA-Z \._-]*\).*+\1+'
guestHyp

And with the fixed regex

$ echo "Subject: O=Test,CN=guestHyp1ver"  | sed 's+.*CN=\([^,]*\).*+\1+'
guestHyp1ver

Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-11 14:58:02 +00:00
Erik Skultety
1215195fd8 domain: conf: graphics: Fix picking DRI renderer automatically for SPICE
Commit 255e0732 introduced a few graphics-related helpers. The problem
is that virDomainGraphicsNeedsAutoRenderNode returns true if it gets
NULL as a response from virDomainGraphicsNeedsAutoRenderNode. That's
okay for egl-headless because that one always needs a DRM render node,
the same is not true for SPICE though, and unless the XML specifies
<gl enable='yes'> for SPICE, there's no need for any renderer.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-11 15:15:17 +01:00
Nikolay Shirokovskiy
067aad26be qemu: disable external snapshot of readonly disk
Disable external snapshot of a readonly disk for domains as
this operation is not very useful. Such a snapshot is not
possible for active domains but the error message from QEMU
is more cryptic:

     error: internal error: unable to execute QEMU command 'transaction':
                         Could not create file: Permission denied

This error at least makes the error more understandable for
active domains and disallows for inactive domains as well.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-12-11 10:58:34 +03:00
Marek Marczykowski-Górecki
fa30ee04a2 libxl: handle external domain destroy
If domain is killed with `xl destroy`, libvirt will not notice it and
still report the domain as running. Also trying to destroy the domain
through libvirt will fail. The only way to recover from such a situation
is to restart libvirt daemon. The problem is that even though libxl
report LIBXL_EVENT_TYPE_DOMAIN_DEATH, libvirt ignore it as all the
domain cleanup is done in a function actually destroying the domain. If
destroy is done outside of libvirt, there is no place where it would be
handled.

Fix this by doing domain cleanup in LIBXL_EVENT_TYPE_DOMAIN_DEATH too.
To avoid doing it twice, add a ignoreDeathEvent flag
libxlDomainObjPrivate, set when the domain death is triggered by libvirt
itself.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2018-12-10 14:06:06 -07:00
Marek Marczykowski-Górecki
73dfa2cf74 libxl: add missing cleanup on error path in libxlDomainPMWakeup
Since domain was suspended before and on failed wakeup is destroyed,
send an event.
Also, add missing libxlDomainCleanup.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2018-12-10 14:06:06 -07:00
Laine Stump
c55ff370f8 lxc: don't forbid <interface type='direct'>
Commit 017dfa27d changed a few switch statements in the LXC code to
have all possible enum values, and in the process changed the switch
statement in virLXCControllerGetNICIndexes() to return an error status
for unsupported interface types, but it erroneously put type='direct'
on the list of unsupported types.

type='direct' (implemented with a macvlan interface) is supported on
LXC, but it's interface shouldn't be placed on the list of interfaces
given to CreateMachineWithNetwork() because the interface is put
inside the container, while CreateMachineWithNetwork() only wants to
know about the parent veths of veth pairs (the parent veth remains on
the host side, while the child veth is put into the container).

Resolves: https://bugzilla.redhat.com/1656463
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-08 12:38:15 -05:00
Laine Stump
59603b62fa lxc: check actual type of interface not config type
virLXCControllerGetNICIndexes() was deciding whether or not to add the
ifindex for an interface's ifname to the list of ifindexes sent to
CreateMachineWithNetwork based on the interface type stored in the
config. This would be incorrect in the case of <interface
type='network'> where the network was giving out macvlan interfaces
tied to a physical device (i.e. when the actual interface type was
"direct").

Instead of checking the setting of "net->type", we should be checking
the setting of virDomainNetGetActualType(net).

I don't think this caused any actual misbehavior, it was just
technically wrong.

Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-08 12:37:32 -05:00
Daniel P. Berrangé
081bdb4d68 tests: fix dry run handling in network firewall test
The networkxml2firewalltest sets virCommand to dry run mode but doesn't
provide a callback to fill in stdout/stderr. As a result when the
firewall code queries rules it gets a NULL output and so never triggers
the callback to process output.

This trivial change just returns an empty string for the command output
in order to ensure the callback gets triggered. It has no effect right
now, but in future patches this will trigger greater test coverage.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-07 15:45:51 +00:00
Daniel P. Berrangé
0367524b4f tests: remove duplicated test case in networkxml2firewalltest
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-07 15:45:51 +00:00
Daniel P. Berrangé
2deb74f1fe util: refactor iptables APIs to share more code
Most of the iptables APIs share code for the add/delete paths, but a
couple were separated. Merge the remaining APIs to facilitate future
changes.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-07 15:45:51 +00:00
Jim Fehlig
84e7d8f461 news: Mention Xen support for openvswitch
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-06 15:08:23 -07:00
Jim Fehlig
0a1b565382 xenconfig: add support for openvswitch configuration
Add support for converting openvswitch interface configuration
to/from libvirt domXML and xl.cfg(5). The xl config syntax for
virtual interfaces is described in detail in the
xl-network-configuration(5) man page. The Xen Networking wiki
also contains information and examples for using openvswitch
in xl.cfg config format

https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch

Tests are added to check conversions of openvswitch tagged and
trunked VLAN configuration.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-06 15:05:16 -07:00
Jim Fehlig
de09ae2f46 libxl: support openvswitch interfaces
It is currently possible to use <interface>s of type openvswitch
with the libxl driver in a non-standard way, e.g.

  <interface type='bridge'>
    <source bridge='ovsbr0'/>
    <mac address='00:16:3e:7a:35:ce'/>
    <script path='vif-openvswitch'/>
  </interface>

This patch adds support for openvswitch <interface>s specified
in typical libvirt config

  <interface type='bridge'>
    <source bridge='ovsbr0'/>
    <mac address='00:16:3e:7a:35:ce'/>
    <virtualport type='openvswitch'/>
  </interface>

VLAN tags and trunking are also supported using the extended
syntax for specifying an openvswitch bridge in libxl

   BRIDGE_NAME[.VLAN][:TRUNK:TRUNK]

See Xen's networking wiki for more details on openvswitch support

https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-06 14:51:01 -07:00
John Ferlan
61d1253364 qemu: Don't fail stats collection due to IOThread capability
Commit 212dc9286 made a generic qemuDomainGetIOThreadsMon which
would fail if the QEMU_CAPS_OBJECT_IOTHREAD didn't exist. Then
commit d1eac927 used that helper for the collection of all domain
stats. However, if the capability doesn't exist, then the entire
stats collection fails. Since the IOThread stats were meant to be
if available only, thus rather than failing if the capability
doesn't exist, let's just not collect the stats. Restore the caps
failure logic for qemuDomainGetIOThreadsLive.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-06 12:29:03 -05:00
John Ferlan
e1fc7ec081 qemu: Save qemuDomainGetStats error
During qemuConnectGetAllDomainStats if qemuDomainGetStats causes
a failure, then when collecting more than one domain's worth of
statistics the loop in virDomainStatsRecordListFree would call
virDomainFree which would call virResetLastError effectively wiping
out the reason we failed leaving the caller with no idea why the
collection failed.

To fix this, let's Preserve the error and Restore it prior to return
so that a caller such as 'virsh domstats' doesn't get the generic
"error: An error occurred, but the cause is unknown".

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-06 11:38:07 -05:00
Peter Krempa
eed7b205c4 tests: qemuxml2argv: Remove disks from few tests which don't need them
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 17:53:26 +01:00
Peter Krempa
7129b9f354 conf: snapshot: Remove file format check from parser
We already have a way stricter check in the code which is doing the
snapshot so duplicating it in the parser does not make much sense. Also
gets rid of an ugly ternary operator.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 17:53:26 +01:00
Peter Krempa
58da6e3c26 qemu: domain: Initialize proper element in qemuDomainPrepareStorageSourceBlockdev
We are preparing a certain disk source passed in as '@src' so the
individual functions should use that rather than disk->src which
corresponds to the top level element of the chain only.

Without this change TLS and persistent reservations would not work for
backing images of a chain when using -blockdev.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 17:53:26 +01:00
Peter Krempa
b0ae508344 util: xml: Always consume args of virXMLFormatElement
The function clears and frees the passed buffers on success, but not in
one case of failure. Modify the control flow that the args are always
consumed, record it in the docs and remove few pointless cleanup paths
in callers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 17:53:26 +01:00
Peter Krempa
0ba4da5871 tests: qemuxml2xml: Add few debug statements for status XML testing
Add markers for allowing test debugging if one of the steps fails
without setting a proper error.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 17:53:26 +01:00
Michal Privoznik
7730a2ead4 qemuDomainRemoveRNGDevice: Remove associated chardev too
https://bugzilla.redhat.com/show_bug.cgi?id=1656014

An RNG device can consists of more devices than RND device
itself. For instance, in case of EGD there is a chardev that
connects to EGD daemon and feeds the qemu with random data. When
doing RNG device removal we have to remove the associated chardev
as well.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 15:07:29 +01:00
Yuri Chornoivan
e5c1fbca24 Fix minor typos in messages and docs
Signed-off-by: Yuri Chornoivan <yurchor@ukr.net>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 10:39:54 +01:00
Michal Privoznik
6a6925b9b7 qemuBuildRNGBackendChrdevStr: Fix formatting
The way that the code is currently written makes my eyes hurt.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-04 15:29:59 +01:00
Erik Skultety
c57adc3300 util: Fix the build on MinGW because of missing DT_CHR dirent type
Caused by commit 39480969

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-12-04 09:58:10 +01:00
Michal Privoznik
f39f881dc1 syncNicRxFilterMultiMode: Fix indentation
The indentation of the code in this function is a bit off.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-04 08:48:05 +01:00
Michal Privoznik
7580c82980 syncNicRxFilterMultiMode: Check for helper's retval properly
There are two functions called from syncNicRxFilterMultiMode:
virNetDevSetRcvAllMulti() and virNetDevSetRcvMulti(). Both of
them return 0 on success and -1 on error. However, currently
their return value is checked for != 0 which conflicts with our
assumptions on retvals: a positive value is still considered
success but with current check it would lead to failure.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-04 08:45:15 +01:00
Erik Skultety
3934beb857 docs: Provide news update for libvirt being able to pick a DRI device
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-12-03 14:59:00 +01:00
Erik Skultety
3163de7d0e qemu: command: gfx: egl-headless: Add 'rendernode' option to the cmdline
Depending on whether QEMU actually supports the option, we can put the
'rendernode' on the '-display egl-headless' cmdline.

https://bugzilla.redhat.com/show_bug.cgi?id=1628892

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:58:31 +01:00
Erik Skultety
ae00e73cfe security: dac: gfx: egl-headless: Relabel the DRI device
Just like for SPICE, we need to change the permissions on the DRI device
used as the @rendernode for egl-headless graphics type.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
dc87ee0f3e qemu: cgroup: gfx: egl-headless: Add the DRI device into the cgroup list
Just like for SPICE, we need to put the render node DRI device into the
device cgroup list so that users don't need to add it manually via
qemu.conf file.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
53ca6fa4ea qemu: domain: egl-headless: Add the DRI device into the namespace
Just like for SPICE, we need to put the DRI device into the namespace,
otherwise it will be left out from the DAC relabeling process.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
5f931fe391 conf: gfx: egl-headless: Introduce a new <gl> subelement
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
0a75de2219 conf: gfx: Add egl-headless as a member to virDomainGraphicsDef struct
Since we need to specify the rendernode option onto QEMU cmdline, we
need this union member to retain consistency in how we build the
cmdline.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
312063b766 qemu: caps: Introduce QEMU_EGL_HEADLESS_RENDERNODE capability
Now that we have QAPI introspection of display types in QEMU upstream,
we can check whether the 'rendernode' option is supported with
egl-headless display type.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
eeb7059aa3 qemu: command: Introduce qemuBuildGraphicsEGLHeadlessCommandLine helper
We're going to need a bit more logic for egl-headless down the road so
prepare a helper just like for the other display types.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
27cc9f6ac1 qemu: process: spice: Pick the first available DRM render node
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:

crw-rw----. 1 root video

There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
255e073263 conf: Introduce virDomainGraphics-related helpers
A few simple helpers that allow us to determine whether a graphics can
and will need to make use of a DRM render node.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
394809694a util: Introduce virHostGetDRMRenderNode helper
This is the first step towards libvirt picking the first available
render node instead of QEMU. It also makes sense for us to be able to do
that, since we allow specifying the node directly for SPICE, so if
there's no render node specified by the user, we should pick the first
available one. The algorithm used for that is essentially the same as
the one QEMU uses.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Jason Baron
8cb06b7f35 qemu: handle multicast overflow on macvtap NIC_RX_FILTER_CHANGED
Guest network devices can set 'overflow' when there are a number of multicast
ips configured. For virtio_net, the limit is only 64. In this case, the list
of mac addresses is empty and the 'overflow' condition is set. Thus, the guest
will currently receive no multicast traffic in this state.

When 'overflow' is set in the guest, let's turn this into ALLMULTI on the host.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-03 14:35:10 +01:00
Stefan Schallenberg
47647bda03 News: Add armv6l Support as guest
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-12-03 14:31:49 +01:00
Stefan Schallenberg
96d62d9721 qemu: Add Default PCI Device for armv6l versatilepb guests
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-12-03 14:31:47 +01:00
Stefan Schallenberg
41cc4ca107 Add armv6l Support as guest
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.

Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-12-03 14:31:41 +01:00
Andrea Bolognani
55f9f486e1 news: Fix version number
The schema expects it to match the pattern

  v[0-9]+\.[0-9]+\.[0-9]+

which "5.0.0" clearly doesn't, causing the build to fail.

Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2018-12-03 14:17:41 +01:00
Andrea Bolognani
0ef33062ef maint: Post-release version bump to 5.0.0
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2018-12-03 14:13:19 +01:00