IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With us switching to glib more and more it is easy to get things
wrong (as can be seen in the previous commit). Set G_DEBUG
variable to "fatal-warnings" which causes GLib to abort the
program at the first call to g_warning() or g_critical().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
GLib implementation of g_dbus_connection_call_sync() calls
g_variant_ref_sink() on the passed @parameters to make sure they have
proper reference. If the original reference is floating the
g_dbus_connection_call_sync() consumes it, but if it's normal reference
it will just add another one.
Our mock functions were only freeing the @parameters which is incorrect
and doesn't reflect how the real implementation works.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Followup of commit a79e7639da and
commit 7556ab139f
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
On EOF condition we always have POLLHUP event and read returns
0 thus we never break loop in virLogHandlerDomainLogFileDrain.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If writing side writes enough bytes to the pipe and closes writing
end then we got both VIR_EVENT_HANDLE_HANGUP and VIR_EVENT_HANDLE_READ
in handler. Currently in this situation handler reads 1024 bytes
and finish reading leaving unread data in pipe.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Somehow this check was duplicated just below the original.
(I was at first skeptical that it's needed at all, since
GET_VLAN_VID_CMD was already present in kernel 2.6.32, but then I
realized that there is no higher level check for __linux__ around the
code that is conditional on WITH_DECL_GET_VLAN_VID_CMD; it only checks
for SIOCGIFVLAN and WITH_STRUCT_IFREQ - the latter is also present on
*BSD platforms, the former doesn't seem to be anywhere but Linux, but
I didn't want to change the effect of the conditional, so I left it in
(we could have also replaced WITH_DECL_GET_VLAN_VID_CMD, but possibly
there is a non-Linux platform that *does* have it...)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Lack of this one function (which is called for each active tap device
every time libvirtd is started) is the one thing preventing a
"WITHOUT_LIBNL" build of libvirt from being useful. With this
alternate implementation, guests using standard tap devices will work
properly even when libvirt is built without libnl support.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one stray bit of code in virnetdev.c that required libnl to
build, but wasn't qualified by defined(WITH_LIBNL). Adding that, plus
putting a similar check around a static function only used by that
aforementioned code, makes libvirt build properly without libnl3-devel
installed.
How useful it is in that state is a separate issue :-)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag was originally created to indicate that either 1) the build
platform wasn't linux, 2) the build platform was linux, but the kernel
was too old to have macvtap support. Since there was already a switch
there, the ability to also disable it when 3) the kernel supports
macvtap but the user doesn't want it, was added in. I don't think that
(3) was ever an intentional goal, just something that grew naturally
out of having the flag there in the first place (unless possibly the
original author wanted a way to quickly disable their new code in case
it caused regressions elsewhere).
Now that the check for (2) has been removed, WITH_MACVTAP is just
checking (1) and (3), but (3) is pointless (because the extra code in
libvirt itself is miniscule, and the only external library needed for
it is libnl, which is also required for other unrelated features (and
itself has no subordinate dependencies and takes up < 1MB on
disk)). We can therfore eliminate the WITH_MACVTAP flag, as it is
functionally equivalent to WITH_LIBNL (which implies __linux__).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macvtap support was added to the Linux kernel in 2.6.33. libvirt
checked for this by looking for MACVLAN_MODE_BRIDGE and IFLA_VF_MAX in
linux/if_link.h. This hasn't been necessary for a very long time, so
just gate on platform == 'linux' (and be sure to complain if someone
tries to enable it on a non-Linux platform).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macvlan support was added to the Linux kernel in 2.6.33, but
MACVLAN_MODE_PASSTHRU wasn't added until 2.6.38, so a workaround had
been put in place to define that constant on those few systems where
it was missing. It's useful like was probably 6 months at most, but
it's been there for over 10 years.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_LIBNL will only be defined on Linux platforms (because libnl is a
library written to encapsulate parts of netlink, which is a Linux-only
API), so it's redundant to write:
#if defined(__linux__) && defined(WITH_LIBNL)
We can just check for WITH_LIBNL.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IFLA_VF_MAX was introduced to the Linux kernel in 2.6.35, and was even
backported to the RHEL*6* 2.6.32 kernel downstream, so it is present
in all supported versions of all Linux distros that libvirt builds
on. Additionally, it can't be conditionally compiled out of a
kernel. There is no reason to conditionalize any piece of code on
presence of IFLA_VF_MAX - if the platform is Linux, it is supported.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All these lines were moved over from the now-defunct
virDomainNetDefClear(), which required all pointers to be cleared
after free, but virDomainNetDefFree() doesn't have that restriction -
after free'ing the pointers are never again referenced, so g_free() is
safe.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is no longer used anywhere except virDomainNetDefFree(),
so just inline its contents there.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of saving the interesting pieces of each existing NetDef,
clearing it, and then copying back the saved pieces after setting the
type to ethernet, just create a new NetDef, copy in the interesting
bits, and replace the old one. (The end game is to eliminate
virDomainNetDefClear() completely, since this is the only real use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Take the easy way out and use typeof, because my life
is too short to spend it reading gendispatch.pl.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The former has been present since
commit f43798c27684ab925adde7d8acc34c78c6e50df8
Author: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu Jul 3 03:48:02 2008 -0700
tun: Allow GSO using virtio_net_hdr
and the latter since
commit bbb009941efaece3898910a862f6d23aa55d6ba8
Author: Jason Wang <jasowang@redhat.com>
Date: Wed Oct 31 19:45:59 2012 +0000
tuntap: introduce multiqueue flags
these are old enough that they can be assumed present in all Linux
platforms we support. The tap device creation code changed is specific
to Linux, with a separate impl for non-Linux platforms.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I've found two files under qemuxml2xmloutdata/ that are the same
as in qemuxml2argvdata/. Replace them with symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Check whether the alloc result is negative (which is
cannot happen with current code) to reduce churn in
the following commit.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use goto to jump over the ret = 0 assignment
as is usual in rest of the code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The objects at @def and @mem pointers are only read and not
written. Make the arguments const to make that explicit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If a domain was using hugepages through memory-backend-file or
via -mem-path, we would turn prealloc on. But we are not doing
that for memory-backend-memfd. Fix this, because we need QEMU to
fully allocate hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If user specifies immediate memory allocation in the domain XML,
they want QEMU to fully allocate its memory. And if the memory
was allocated using plain '-m' then we would honour it. But, if a
memory backend is used, then we don't set the prealloc attribute
of the backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
