IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
I got annoyed at having to use both 'virsh vol-list $pool --details'
AND 'virsh vol-dumpxml $vol $pool' to learn if I had populated
the volume correctly. Since two-thirds of the data present in
virStorageVolGetInfo() already appears in virStorageVolGetXMLDesc(),
this just adds the remaining piece of information, as:
<volume type='...'>
...
</volume>
* docs/formatstorage.html.in: Document new <volume type=...>.
* docs/schemas/storagevol.rng (vol): Add it to RelaxNG.
* src/conf/storage_conf.h (virStorageVolTypeToString): Declare.
* src/conf/storage_conf.c (virStorageVolTargetDefFormat): Output
the metatype.
(virStorageVolDefParseXML): Parse it, for unit tests.
* tests/storagevolxml2xmlout/vol-*.xml: Update tests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'docs/examples' code was long ago removed and now the
python code was gone too, the custom 'tests' makefile target
serves no purpose
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous attempt (commit d65e0e1) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)
https://bugzilla.redhat.com/show_bug.cgi?id=962225
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new volume from handwritten XML.
(Compare also to commit caf516db for pools).
* docs/schemas/storagevol.rng: Support interleaving.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I didn't find any other instances with:
git grep '1\.1\.5'
* src/test/test_driver.c (testDriver): Tweak version info.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefile.am, vbox_V4_3.c and vbox_driver.c do regular
modifitions to support a new version of APIs.
vbox_tmpl.c basically fixes incompatibilities since 4.2.
The affected incompatibilities of 4.3 are:
* IMachine::Delete() has been renamed to IMachine::deleteConfig()
* IMedium::CreateBaseStorage() now accepts multiple variant values
* IDisplay::GetScreenResolution() now returns the display position
in the guest
* IMachine now has multiple IUSBControllers and IUSBDeviceFilters
handles USB device filters instead of (obsolete) IUSBController
This patch is tested on Mac OS X 10.8.5 and Fedora 19.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The USB-related code in vboxDomainGetXMLDesc is deeply nested and
difficult to add new code. So flatten it. To do so, the code is
pulled out from vboxDomainGetXMLDesc to make the function short
and to leaverage early return and goto for error handling.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Among others, this fixes getgroups for MacOS and fpending for
DragonFly BSD.
* .gnulib: Update to latest.
Signed-off-by: Eric Blake <eblake@redhat.com>
This reverts commit 6b90d7428d.
The original problem was that libvirt_virConnectGetCPUModelNames
was listed twice in the exports table, once automatically from
the generator and once from the manual override. We merely needed
to list it in the skip_impl list, and not delete the manually
written code entirely.
This nested job is canceled by the first ExitMonitor call (even though
it was not created by the corresponding EnterMonitor call), and
again in qemuMigrationPrepareAny if qemuProcessStart failed.
This can lead to a crash if the vm object was disposed of before calling
qemuDomainRemoveInactive:
0 ..62bc in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7ffce4cdd270) at util/virobject.c:166
1 ..6666 in virObjectIsClass at util/virobject.c:362
2 ..66b4 in virObjectLock at util/virobject.c:314
3 ..477e in virDomainObjListRemove at conf/domain_conf.c:2359
4 ..7a64 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2087
5 ..956c in qemuMigrationPrepareAny at qemu/qemu_migration.c:2469
This was added by commit e4e2822, exposed by 5a4c237 and c7ac251.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
Restarting an active libvirt-guests.service is the equivalent of
doing:
/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start
Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.
Just drop the try-restart attempt, I don't know what purpose it
serves anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=962225
https://bugzilla.redhat.com/show_bug.cgi?id=1033614
As virt-login-shell is an SUID binary, we should restrict its usage to
just the users chosen by an administrator to use virt-login-shell as
their login shell. This can easily be done by making the binary
executable only by users from a new virtlogin group.
https://bugzilla.redhat.com/show_bug.cgi?id=744967
If a domain is rebooting and a migrate API is called meanwhile we would
have to transfer the fakeReboot attribute to the destination in order to
prevent domain doing plain shutdown over there. We shouldn't try to do
anything clever about it other than documenting this as a known
limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Older xmllint version don't allow such characters in datatype anyURI.
In order not to change too much, I'm suggesting making a choice of
anyURI or 'absPathName' which should be fine (checked with upstream
and that old xmllint, both work fine).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit de51dc9c9a primarily added
virConnectGetCPUModelNames as libvirt.getCPUModelNames(conn, arch)
instead of libvirt.virConnect.getCPUModelNames(arch) so revert the code
that does the former while leaving the code that does the later.
This is the rest of the patch that was ACK'd by Dan but I committed only
the partial patch in 6a8b8ae.
Commit de51dc9c9a primarily added
virConnectGetCPUModelNames as libvirt.getCPUModelNames(conn, arch)
instead of libvirt.virConnect.getCPUModelNames(arch) so revert the code
that does the former while leaving the code that does the later.
If a SCSI hostdev is included in an initial domain XML, without a
corresponding controller statement, one is created silently when the
guest is booted.
When hotplugging a SCSI hostdev, a presumption is that the controller
is already present in the domain either from the original XML, or via
an earlier hotplug.
[root@xxxxxxxx ~]# cat disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='3' unit='1088438288'/>
</source>
</hostdev>
[root@xxxxxxxx ~]# virsh attach-device guest01 disk.xml
error: Failed to attach device from disk.xml
error: internal error: unable to execute QEMU command 'device_add': Bus 'scsi0.0' not found
Since the infrastructure is in place, we can also create a controller
silently for use by the hotplugged hostdev device.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
For systems without a PCI bus, attaching a SCSI controller fails:
[root@xxxxxxxx ~]# cat controller.xml
<controller type='scsi' model='virtio-scsi' index='0' />
[root@xxxxxxxx ~]# virsh attach-device guest01 controller.xml
error: Failed to attach device from controller.xml
error: XML error: No PCI buses available
A similar problem occurs with the detach of a controller:
[root@xxxxxxxx ~]# virsh detach-device guest01 controller.xml
error: Failed to detach device from controller.xml
error: operation failed: controller scsi:0 not found
The qemuDomainXXtachPciControllerDevice routines made assumptions
that any caller had a PCI bus. These routines now selectively calls
PCI functions where necessary, and assigns the device information
type to one appropriate for the bus in use.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
It makes no sense to go forward to get the parent host number of a
HBA, and treat the HBA as a vHBA with trying to delete it.
Signed-off-by: Osier Yang <jyang@redhat.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
Enforce and document the style set up by the previous patches.
* build-aux/bracket-spacing.pl: Add comma checks.
* docs/hacking.html.in: Document the rules.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/vbox/vbox_tmpl.c: Consistently use commas.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* python/libvirt-override.c: Consistently use commas.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/util/vircommand.c: Consistently use commas.
* src/util/virlog.c: Likewise.
* src/util/virnetdevbandwidth.c: Likewise.
* src/util/virnetdevmacvlan.c: Likewise.
* src/util/virnetdevvportprofile.c: Likewise.
* src/util/virnetlink.c: Likewise.
* src/util/virpci.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/virusb.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/libxl/libxl_driver.c: Consistently use commas.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenxs/xen_sxpr.c: Likewise.
* src/xenxs/xen_xm.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/conf/capabilities.c: Consistently use commas.
* src/conf/domain_conf.c: Likewise.
* src/conf/network_conf.c: Likewise.
* src/conf/storage_conf.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/nwfilter/nwfilter_ebiptables_driver.c: Consistently use
commas.
* src/nwfilter/nwfilter_gentech_driver.c: Likewise.
* src/nwfilter/nwfilter_learnipaddr.c: Likewise.
* src/conf/nwfilter_conf.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
For a while we're have random failures of 'securityselinuxtest'
which were not at all reproducible. Fortunately we finally
caught a failure with VIR_TEST_DEBUG=1 enabled. This revealed
TEST: securityselinuxtest
1) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK
2) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK
3) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK
4) GenLabel "dynamic virtd, s0, c0.c1023" ... OK
5) GenLabel "dynamic virtd, s0, c0.c10" ... OK
6) GenLabel "dynamic virtd, s2-s3, c0.c1023" ... OK
7) GenLabel "dynamic virtd, missing range" ... Category two 1024 is out of range 0-1023
FAILED
FAIL: securityselinuxtest
And sure enough we had an off-by-1 in the MCS range code when
the current process has no range set. The test suite randomly
allocates 2 categories from 0->1024 so the chances of hitting
this in the test suite were slim indeed :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc
directives are present, prior to copying in the marked documentation.
This means we can't prepopulate this directory with the HTML
documentation during the %install phase.
Instead, move the HTML documentation to a temporary directory during
%install and mark the contents of this temporary directory with %doc.
This fixes a build regression introduced in
commit e23216da9a
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Sep 25 13:20:40 2013 -0400
spec: Clean up distribution of ChangeLog (and others)
where the libvirt-docs sub-RPM gained a %doc directive, thus
triggering the RPM bug.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
All our .pl scripts had the executable bit set, except for one.
Make it consistent (even if we invoke the scripts as an argument
to $(PERL) rather than directly).
* src/check-aclrules.pl: Make executable.
Signed-off-by: Eric Blake <eblake@redhat.com>
All *-info virsh commands output a list of colon-seperated key-val pairs.
But virsh net-info command misses this colon for key "Name" and "UUID".
Signed-off-by: Hao Liu <hliu@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
