1
0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 01:34:11 +03:00
Commit Graph

9921 Commits

Author SHA1 Message Date
Eric Blake
3c3644d30f build: ensure storage driver is used
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined.  Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.

Based on analysis by Osier Yang.

* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
2012-06-06 12:16:07 +08:00
Michal Privoznik
eb635de1fe rpc: Size up RPC limits
Since we are allocating RPC buffer dynamically, we can increase limits
for max. size of RPC message and RPC string. This is needed to cover
some corner cases where libvirt is run on such huge machines that their
capabilities XML is 4 times bigger than our current limit. This leaves
users with inability to even connect.
2012-06-05 17:48:40 +02:00
Michal Privoznik
a2c304f687 rpc: Switch to dynamically allocated message buffer
Currently, we are allocating buffer for RPC messages statically.
This is not such pain when RPC limits are small. However, if we want
ever to increase those limits, we need to allocate buffer dynamically,
based on RPC message len (= the first 4 bytes). Therefore we will
decrease our mem usage in most cases and still be flexible enough in
corner cases.
2012-06-05 17:48:40 +02:00
Eric Blake
7bff56a0d1 build: fix 'make distcheck' issues
We had a distributed file (remote_protocol.h, which in turn was
a prereq to remote_driver.c) depending on a generated file
(libvirt_probes.h), which is a no-no for a VPATH build from a
read-only source tree (no wonder 'make distcheck' tests precisely
that situation):

     File `libvirt_driver_remote.la' does not exist.
       File `libvirt_driver_remote_la-remote_driver.lo' does not exist.
             Prerequisite `libvirt_probes.h' is newer than target `../../src/remote/remote_protocol.h'.
            Must remake target `../../src/remote/remote_protocol.h'.
Invoking recipe from Makefile:7464 to update target `../../src/remote/remote_protocol.h'.
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/libvirt-0.9.12/_build/src'
  GEN    ../../src/remote/remote_protocol.h
cannot create ../../src/remote/remote_protocol.h: Permission denied at ../../src/rpc/genprotocol.pl line 31.
make[3]: *** [../../src/remote/remote_protocol.h] Error 13

Rather than making distributed .c files depend on generated files, we
really want to ensure that compilation into .lo files is not attempted
until the generated files are present, done by this patch.  Since there
were two different sets of conditionally generated files that both
feed the .lo file, I had to introduce a new variable REMOTE_DRIVER_PREREQS
to keep automake happy.

After that fix, the next issue was that make treats './foo' and 'foo'
differently in determining whether an implicit %foo rule is applicable,
with the result that locking/qemu-sanlock.conf wasn't properly being
built at the right times.  Also, the output for using the .aug test
files was a bit verbose.

After fixing the src directory, the next error is related to the docs
directory, where the tarball is missing a stamp file and thus tries to
regenerate files that are already present:

  GEN    ../../docs/apibuild.py.stamp
Traceback (most recent call last):
  File "../../docs/apibuild.py", line 2511, in <module>
    rebuild("libvirt")
  File "../../docs/apibuild.py", line 2495, in rebuild
    builder.serialize()
  File "../../docs/apibuild.py", line 2424, in serialize
    output = open(filename, "w")
IOError: [Errno 13] Permission denied: '../../docs/libvirt-api.xml'
make[5]: *** [../../docs/apibuild.py.stamp] Error 1

and fixing that exposed another case of a distributed file (generated
html) depending on a built file (libvirt.h), but only when doing an
in-tree build, because of a file glob.

* src/Makefile.am ($(srcdir)/remote/remote_driver.c): Change...
(libvirt_driver_remote_la-remote_driver.lo): ...to the real
dependency.
($(builddir)/locking/%-sanlock.conf): Drop $(builddir), so that
rule gets run in time for test_libvirt_sanlock.aug.
(test_libvir*.aug): Cater to silent build.
(conf_DATA): Don't ship qemu-sanlock.conf in the tarball, since it
is trivial to regenerate.
* docs/Makefile.am (EXTRA_DIST): Ship our stamp file.
($(APIBUILD_STAMP)): Don't depend on generated file.
2012-06-05 09:20:12 -06:00
Jiri Denemark
ae953f5134 tests: Refresh qemu-1.1.0 data
QEMU 1.1.0 has been officially released. With 1.1.0 QEMU went back to
three-digits version even for the initial release and I renamed the data
files to match this fact. They were generated with

qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.1.0
qemu-system-x86_64 \
    -device ? \
    -device pci-assign,? \
    -device virtio-blk-pci,? \
    -device virtio-net-pci,? \
    -device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.1.0-device
2012-06-05 15:44:40 +02:00
Osier Yang
ee58b581c4 virsh: Back out if the argument for vol-create-as is malformed 2012-06-05 14:56:40 +08:00
Osier Yang
68fcfdb8bd virsh: Accept UUID as an argument for net-info and net-start 2012-06-05 14:56:37 +08:00
Osier Yang
05f8917f96 virsh: Accept UUID as an argument for storage commands
Affected commands are: pool-start, vol-create-from.
2012-06-05 14:56:35 +08:00
Beat Jörg
7508338ff3 Fix for parallel port passthrough for QEMU
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.

It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0

The first parameter is "tty". It sould be "parport".

If I launch qemu with -chardev parport,... it works as expected.

I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:

https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-06-04 16:46:23 -06:00
Eric Blake
a3bc393e3a maint: command.c whitespace cleanups
Noticed during the previous commit.

* src/util/command.c: Fix some spacing and break long lines.
2012-06-04 16:32:43 -06:00
Eric Blake
858c2476d9 command: avoid deadlock on EPIPE situation
It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early.  This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt.  The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.

Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.

* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.
2012-06-04 13:06:07 -06:00
Laine Stump
80e4b166e1 util: fix "make rpm" when viratomic.h is used
Although src/util/viratomic.h has been added to the repo, up until now
it hasn't been used. Stefan Berger is using it in his proposed dhcp
snooping patches, and an rpm build with those patches failed due to
viratomic.h not being packed up with the rest of the sources.
2012-06-04 14:46:32 -04:00
Eric Blake
2af63b1c34 build: allow building with newer glibc-headers and -O0
glibc 2.15 (on Fedora 17) coupled with explicit disabling of
optimization during development dies a painful death:

In file included from /usr/include/limits.h:27:0,
                 from /usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/limits.h:169,
                 from /usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/syslimits.h:7,
                 from /usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/limits.h:34,
                 from util/bitmap.c:26:
/usr/include/features.h:314:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
cc1: all warnings being treated as errors

Work around this by only conditionally defining _FORTIFY_SOURCE,
in the case where glibc can actually use it.  The trick is using
AH_VERBATIM instead of AC_DEFINE.

* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Squelch
_FORTIFY_SOURCE when needed to avoid glibc #warnings.
2012-06-04 12:08:27 -06:00
Wen Congyang
c094b4b332 fix make syntax-check failed 2012-06-04 09:29:59 -06:00
Eric Blake
85815b6a40 build: fix sc_prohibit_readlink
I noticed this during 'make syntax-check':

prohibit_readlink
grep: Unmatched ( or \(

* cfg.mk (exclude_file_name_regexp--sc_prohibit_readlink): Fix
mismatched '('.
2012-06-04 09:29:21 -06:00
Jiri Denemark
dfd4584317 file: Log closing filedescriptors
EBADF errors are logged as warnings as they normally indicate a double
close bug. This patch also provides VIR_MASS_CLOSE helper to be user in
the only case of mass close after fork when EBADF should rather be
ignored.
2012-06-04 16:28:15 +02:00
Jiri Denemark
461ed4210f command: Fix debug message during handshake
Probably a result of copy&paste...
2012-06-04 16:25:57 +02:00
Radu Caragea
107f51b69c Fix sync issue in virNetClientStreamEventRemoveCallback
The stream lock is unlocked twice instead of being locked and then
unlocked. Probably a typo.
2012-06-04 09:32:37 +02:00
Michal Privoznik
a7de052369 virsh: Allow users to reedit rejected XML
If users *-edit but make a mistake in XML all changes are
permanently lost. However, if virsh is not running within
a script we can ask user if he wants to re-edit the file
and correct the mistakes.
2012-06-02 10:42:54 +02:00
Michal Privoznik
0766783abb virsh: Switch from generated cmd*Edit commands to nongenerated
Currently, we either generate some cmd*Edit commands (cmdPoolEdit
and cmdNetworkEdit) via sed script or copy the body of cmdEdit
(e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes
it harder to implement any new feature to our editing system.
Therefore switch to new implementation - define macros to:
- dump XML (EDIT_GET_XML)
- take an action if XML wasn't changed,
  usually just vshPrint() (EDIT_NOT_CHANGED)
- define new object (EDIT_DEFINE) - the edited XML is in @doc_edited
- free object defined by EDIT_DEFINE (EDIT_FREE)
and #include "virsh-edit.c"
2012-06-02 10:40:51 +02:00
Stefan Berger
b92d52d3c0 nwfilter: Add multiple IP address support to DHCP snooping
With support for multiple IP addresses per interface in place, this patch
now adds support for multiple IP addresses per interface for the DHCP
snooping code.


Testing:

Since the infrastructure I tested this with does not provide multiple IP
addresses per MAC address (anymore), I either had to plug the VM's interface
from the virtual bride connected directly to the infrastructure to virbr0
to get a 2nd IP address from dnsmasq (kill and run dhclient inside the VM)
or changed the lease file  (/var/run/libvirt/network/nwfilter.leases) and
restart libvirtd to have a 2nd IP address on an existing interface.
Note that dnsmasq can take a lease timeout parameter as part of the --dhcp-range
command line parameter, so that timeouts can be tested that way
(--dhcp-range 192.168.122.2,192.168.122.254,120). So, terminating and restarting
dnsmasq with that parameter is another choice to watch an IP address disappear
after 120 seconds.

Regards,
   Stefan
2012-06-01 19:32:06 -04:00
Stefan Berger
797b47580a nwfilter: move code for IP address map into separate file
The goal of this patch is to prepare for support for multiple IP
addresses per interface in the DHCP snooping code.

Move the code for the IP address map that maps interface names to
IP addresses into their own file. Rename the functions on the way
but otherwise leave the code as-is. Initialize this new layer
separately before dependent layers (iplearning, dhcpsnooping)
and shut it down after them.
2012-06-01 19:32:06 -04:00
Stefan Berger
cec281fcaa nwfilter: add DHCP snooping
This patch adds DHCP snooping support to libvirt. The learning method for
IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of
"any" [default] (existing IP learning code), "none" (static only addresses)
or "dhcp" (DHCP snooping).

Active leases are saved in a lease file and reloaded on restart or HUP.

The following interface XML activates and uses the DHCP snooping:

    <interface type='bridge'>
      <source bridge='virbr0'/>
      <filterref filter='clean-traffic'>
        <parameter name='CTRL_IP_LEARNING' value='dhcp'/>
      </filterref>
    </interface>

All filters containing the variable 'IP' are automatically adjusted when
the VM receives an IP address via DHCP. However, multiple IP addresses per
interface are silently ignored in this patch, thus only supporting one IP
address per interface. Multiple IP address support is added in a later
patch in this series.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2012-06-01 19:32:06 -04:00
Marti Raudsepp
195fa214b6 qemu: move -name arg to be 1st in "ps x" output
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.

This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
2012-06-01 15:06:56 -06:00
Laine Stump
6734ce7bc8 qemu: fix netdev alias name assignment wrt type='hostdev'
This patch resolves:

   https://bugzilla.redhat.com/show_bug.cgi?id=827519

The problem is that an interface with type='hostdev' will have an
alias of the form "hostdev%d", while the function that looks through
existing netdevs to determine the name to use for a new addition will
fail if there's an existing entry that does not match the form
"net%d".

This is another of the handful of places that need an exception due to
the hybrid nature of <interface type='hostdev'> (which is not exactly
an <interface> or a <hostdev>, but is both at the same time).
2012-06-01 13:25:56 -04:00
Martin Kletzander
d4fb6694a4 tools: make virt-pki-validate work with acls and xattrs
This patch makes virt-pki-validate work with certificates that have
acl or xattr set. Otherwise it failing due to wrong permissions.
2012-05-31 17:03:33 +02:00
Wen Congyang
b19c236d69 qemu: avoid closing fd more than once
If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().

Bug present since 0.9.5 (commit 326176179).
2012-05-30 21:41:46 -06:00
Wen Congyang
746ff701e8 command: check for fork error before closing fd
We should not set *outfd or *errfd if virExecWithHook() failed
because the caller may close these fds.

Bug present since v0.4.5 (commit 60ed1d2a).
2012-05-30 21:41:46 -06:00
Eric Blake
f3cfc7c884 fdstream: avoid double close bug
Wen Congyang reported that we have a double-close bug if we fail
virFDStreamOpenInternal, since childfd duplicated one of the fds[]
array contents.  In truth, since we always transfer both members
of fds to other variables, we should close the fds through those
other names, and just use fds[] for pipe().

Bug present since 0.9.0 (commit e886237a).

* src/fdstream.c (virFDStreamOpenFileInternal): Swap scope of
childfd and fds[], to avoid a double close.
2012-05-30 21:41:46 -06:00
Eric Blake
da831afcf2 command: avoid double close bugs
KAMEZAWA Hiroyuki reported a nasty double-free bug when virCommand
is used to convert a string into input to a child command.  The
problem is that the poll() loop of virCommandProcessIO would close()
the write end of the pipe in order to let the child see EOF, then
the caller virCommandRun() would also close the same fd number, with
the second close possibly nuking an fd opened by some other thread
in the meantime.  This in turn can have all sorts of bad effects.

The bug has been present since the introduction of virCommand in
commit f16ad06f.

This is based on his first attempt at a patch, at
https://bugzilla.redhat.com/show_bug.cgi?id=823716

* src/util/command.c (_virCommand): Drop inpipe member.
(virCommandProcessIO): Add argument, to avoid closing caller's fd
without informing caller.
(virCommandRun, virCommandNewArgs): Adjust clients.
2012-05-30 21:41:45 -06:00
Wen Congyang
655cffa0f2 avoid fd leak
virCommandRunAsync() will set errfd if it succeed. We should
close it if virFDStreamOpenInternal() fails.
2012-05-30 14:22:48 -06:00
Wen Congyang
0a045f01cf avoid closing uninitialized fd
If the system does not support bypass cache, we will close fd,
but it is uninitialized.
2012-05-30 13:55:49 -06:00
Martin Kletzander
730cc8d783 Fixes for check and rpm builds without sanlock (and qemu)
Apart from the non-sanlock check build, there is also a little fix for
qemu (EXTRA_DIST had qemu.conf and others inside even if the build was
supposed to be without qemu).
2012-05-30 18:57:50 +02:00
Wen Congyang
23292f7389 build: include augeas-gentest.pl into dist file
We generate *.aug from *.aug.in by augeas-gentest.pl, so this script
should be included in dist file.
2012-05-30 09:56:31 -06:00
Eric Blake
13af87f23c build: use same perl binary throughout build
Some of our rules used $(PERL), while others used 'perl'.  Always
using the variable allows a developer to point to a different (often
better) perl than the default one found on $PATH.

* daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL).
* src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h)
(PDWTAGS, %protocol.c, %_probes.stp): Likewise.
2012-05-30 09:33:55 -06:00
Eric Blake
fb59cf7a58 build: fix testing of augeas files in VPATH builds
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:

make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.

Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.

* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
2012-05-30 09:29:32 -06:00
Eric Blake
aabf77aa41 build: silence warning from autoconf
Autoconf 2.60 and later insist on using ${datarootdir}, rather than
the derived ${datadir} (although the latter defaults to the former,
it is possible to set configure arguments so that they differ):

config.status: creating libvirt.pc
config.status: WARNING:  'libvirt.pc.in' seems to ignore the --datarootdir setting

This patch follows the autoconf manual's suggestions for how to
support 2.59 (RHEL 5) and newer simultaneously.

* libvirt.pc.in (datarootdir): Define, so ${datadir} will not ignore
datarootdir when using newer autoconf.
2012-05-30 09:22:02 -06:00
Michal Privoznik
7454849ec5 virCommand: Extend debug message for handshake
Currently, we are logging only one side of pipes we
create in virCommandRequireHandshake(); This is enough
in cases where pipe2() returns two consecutive FDs. However,
it is not guaranteed and it may return any FDs.
Therefore, it's wise to log the other ends as well.
2012-05-30 14:47:56 +02:00
Martin Kletzander
87dfdb0b92 lxc: return correct number of CPUs
When getting number of CPUs the host has assigned, there was always
number "1" returned. Even though all lxc domains with no pinning
launched by libvirt run on all pCPUs (by default, no matter what's the
number), we should at least return the same number as the user
specified when creating the domain.
2012-05-30 12:51:44 +02:00
Martin Kletzander
be6c46b1b4 build: Fixed generating of libvirt_qemu_probes.h
I added libvirt_qemu_probes.h into BUILT_SOURCES. That makes it
generated, but most probably it is not the clearest way how to do
that, but it fixes the build.
2012-05-30 12:13:13 +02:00
Dave Allan
ffc9f7ab4f examples: add consolecallback example python script
A while back I wrote the attached code to demonstrate how to use
events and serial console to create a serial console that stays up
even when the VM is down.  It might need some work, as I am not
terribly strong with Python.

* examples/python/consolecallback.py: New file.
* examples/python/Makefile.am (EXTRA_DIST): Ship it.
2012-05-29 16:54:12 -06:00
Eric Blake
620dda6661 build: don't lose probes.o files
The previous patch fixed an incremental build, but missed that on
a fresh checkout, we now have nothing left that stops make from
nuking libvirt_qemu_probes.o.

* src/Makefile.am ($(libvirt_driver_qemu_la_SOURCES)): Delete,
since this variable is empty.
(.PRECIOUS): Add %_probes.o, so they don't get nuked as an
intermediate by-product after creating %_probes.lo.
2012-05-29 15:09:01 -06:00
Eric Blake
fca009fd04 build: fix missing dependencies for libvirt-qemu.so
The moment you specify a _DEPENDENCIES, older automake (stupidly)
assumes that you will specify _all_ dependencies for that target.
This stupidity has been fixed in automake 1.12, but we cannot rely on
newer automake everywhere.  For libvirt_la_DEPENDENCIES, we took
care of providing the full list, but for libvirt_qemu_la_DEPENDENCIES,
we were missing the dependency on libvirt_qemu_impl.la, which resulted
in a failed build:

make[3]: Entering directory `/home/ajia/Workspace/libvirt/src'
   CCLD   libvirt_driver_qemu.la
libtool: link: `libvirt_qemu_probes.lo' is not a valid libtool object

* src/Makefile.am (libvirt_driver_qemu_la_DEPENDENCIES): Delete;
automake does a better job if it does the entire job.
2012-05-29 12:51:36 -06:00
Eric Blake
28dbf01d08 build: don't clean a file that belongs in the tarball
Otherwise, 'make rpm' fails with:

make[2]: *** No rule to make target `locking/test_libvirt_sanlock.aug.in', needed by `distdir'.  Stop.
make[2]: Leaving directory `/home/dipankar/src/powerpc/libvirt-ppc/src'
make[1]: *** [distdir] Error 1

Reported by Dipankar Sarma.

* src/Makefile.am (CLEANFILES): Clean only the generated file.
2012-05-29 10:54:50 -06:00
Eric Blake
dc4301c726 virsh: avoid strncpy
strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary.  We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.

* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.
2012-05-29 09:24:48 -06:00
Eric Blake
e925ea3156 build: update to latest gnulib
Gnulib finally relaxed the isatty license, needed as first mentioned here:
https://www.redhat.com/archives/libvir-list/2012-February/msg01022.html

Other improvements include better syntax-check rules (we can delete one
of ours now that it is a duplicate) and better compiler warning usage.

* .gnulib: Update to latest, for isatty.
* cfg.mk (sc_prohibit_strncpy): Drop a now-redundant rule.
* bootstrap.conf (gnulib_modules): Add isatty.
* bootstrap: Resync from gnulib.
2012-05-29 08:43:55 -06:00
Stefan Berger
67dd486f20 leak_fix.diff
==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240==    at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240==    by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240==    by 0x509C677: virVasprintf (stdio2.h:199)
==3240==    by 0x509C733: virAsprintf (util.c:1912)
==3240==    by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240==    by 0x511991D: virStateInitialize (libvirt.c:809)
==3240==    by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240==    by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240==    by 0x7953D8F: start_thread (pthread_create.c:309)
==3240==    by 0x805FF5C: clone (clone.S:115)
2012-05-29 06:25:59 -04:00
Stefan Berger
423bb74994 Introduce virMacAddr typedef 2012-05-29 06:25:59 -04:00
Daniel P. Berrange
d8199033d6 Fix typo in comment start
src/libvirt.c: s,//,/,
2012-05-28 17:23:16 +01:00
Daniel P. Berrange
d91f3ef497 Santize the reporting of VIR_ERR_INVALID_ERROR
To ensure consistent error reporting of invalid arguments,
provide a number of predefined helper methods & macros.

 - An arg which must not be NULL:

   virCheckNonNullArgReturn(argname, retvalue)
   virCheckNonNullArgGoto(argname, label)

 - An arg which must be NULL

   virCheckNullArgGoto(argname, label)

 - An arg which must be positive (ie 1 or greater)

   virCheckPositiveArgGoto(argname, label)

 - An arg which must not be 0

   virCheckNonZeroArgGoto(argname, label)

 - An arg which must be zero

   virCheckZeroArgGoto(argname, label)

 - An arg which must not be negative (ie 0 or greater)

   virCheckNonNegativeArgGoto(argname, label)

* src/libvirt.c, src/libvirt-qemu.c,
  src/nodeinfo.c, src/datatypes.c: Update to use
  virCheckXXXX macros
* po/POTFILES.in: Add libvirt-qemu.c and virterror_internal.h
* src/internal.h: Define macros for checking invalid args
* src/util/virterror_internal.h: Define macros for reporting
  invalid args

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 16:47:25 +01:00