IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We document steps how to fix images if they are rejected for missing
the 'backing file format' field. Document also how to securely probe
the image format if it's unknown.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default memlock limit is 64k which is not enough to start a single
VM. The requirements for one VM are 12k, 8k for eBPF map and 4k for eBPF
program, however, it fails to create eBPF map and program with 64k limit.
By testing I figured out that the minimal limit is 80k to start a single
VM with functional eBPF and if I add 12k I can start another one.
This leads into following calculation:
80k as memlock limit worked to start a VM with eBPF which means there
is 68k of lock memory that I was not able to figure out what was using
it. So to get a number for 4096 VMs:
68 + 12 * 4096 = 49220
If we round it up we will get 64M of memory lock limit to support 4096
VMs with default map size which can hold 64 entries for devices.
This should be good enough as a sane default and users can change it if
the need to.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807090
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Whenever there is a guest CPU configured in domain XML, we will call
some CPU driver APIs to validate the CPU definition and check its
compatibility with the hypervisor. Thus domains with guest CPU
specification can only be started if the guest architecture is supported
by the CPU driver. But we would add a default CPU to any domain as long
as QEMU reports it causing failures to start any domain on affected
architectures.
https://bugzilla.redhat.com/show_bug.cgi?id=1805755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow format probing to work around lazy clients which did not specify
their format in the overlay. Format probing will be allowed only, if we
are able to probe the image, the probing result was successful and the
probed image does not have any backing or data file.
This relaxes the restrictions which were imposed in commit 3615e8b39b
in cases when we know that the image probing will not result in security
issues or data corruption.
We perform the image format detection and in the case that we were able
to probe the format and the format does not specify a backing store (or
doesn't support backing store) we can use this format.
With pre-blockdev configurations this will restore the previous
behaviour for the images mentioned above as qemu would probe the format
anyways. It also improves error reporting compared to the old state as
we now report that the backing chain will be broken in case when there
is a backing file.
In blockdev configurations this ensures that libvirt will not cause data
corruption by ending the chain prematurely without notifying the user,
but still allows the old semantics when the users forgot to specify the
format.
Users thus don't have to re-invent when image format detection is safe
to do.
The price for this is that libvirt will need to keep the image format
detector still current and working or replace it by invocation of
qemu-img.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While our code can detect ISO as a separate format, qemu does not use it
as such and just passes it through as raw. Add conversion for detected
parts of the backing chain so that the validation code does not reject
it right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that this file no longer transitively includes
domain_conf.h, it can be included here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make the header easier to read and let the compiler inline
what it wants.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is pulled in via domain_conf.h somehow, but it is directly used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This file uses the virNetDevBandwidth*Floor helpers
without including the correct include,
relying on virnetworkportdef.h to include it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 17f430eb5c
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ParseNode function takes arguments with types
from libxml.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The network port XML files were not including any usage of vlan
tags or port options, and one of the files was not even processed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are a lots of strings being handled inside some LXC functions.
They can be moved to g_autofree to avoid declaring a return value to get
proper code cleanups. This commit is changing functions from
lxc_{controller,cgroup,fuse} only.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Ever since commit c5a00350 the libxl parser invokes the emulator
to probe which device model to use.
Commit b90c4b5 introduced a workaround that used a stable path
which was very likely to result in the answer matching the default.
However the test is still affected by the host state and the binary
gets invoked if present.
Mock the libxlDomainGetEmulatorType function to stop wasting CPU
cycles every time a 'make check' is run on a system with xen installed.
For example xlconfigtest gets faster by 90 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b90c4b5f50
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Take the parts affected by the host state out of DriverConfigNew
and put them into a separate function.
Adjust all the callers to call both functions.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
These hardcoded defaults do not need to be read from
the file. Move them out of libxlDriverConfigLoadFile.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxlDriverConfigNew can possibly fail on wrong
firmware values (unlikely) or on failure to create
the log directory (possible if you're debugging
tests with VIR_FILE_ACCESS)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 4a4132b462
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The way that our file locking works is that we open() the file we
want to lock and then use fcntl(fd, F_SETLKW, ...) to lock it.
The problem is, we are doing all of these as root which doesn't
work if the file lives on root squashed NFS, because if it does
then the open() fails. The way to resolve this is to make this a
non fatal error and leave callers deal with this (i.e. disable
remembering) - implemented in the previous commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1804672
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some cases where we want to remember the original owner
of a file but we fail to lock it for XATTR change (e.g. root
squashed NFS). If that is the case we error out and refuse to
start a domain. Well, we can do better if we disable remembering
for paths we haven't locked successfully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, in the lock state we are storing only the file
descriptors of the files we've locked. Therefore, when unlocking
them and something does wrong the only thing we can report is FD
number, which is not user friendly at all. But if we store paths
among with FDs we can do better error reporting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virutil.h header defines a geteuid() macro for Windows platforms.
This fixes a few missed cases from:
commit b11e8cccdd
Author: Ján Tomko <jtomko@redhat.com>
Date: Sun Feb 16 23:09:15 2020 +0100
Remove virutil.h from all header files
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The autoreconf script will already run aclocal for us,
so there's no need to do that ahead of time.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit fb01e1a44d missed including virutil.h, causing the following
compilation error
../../src/security/virt-aa-helper.c:1055:43: error: implicit declaration of
function 'virHostGetDRMRenderNode' [-Werror=implicit-function-declaration]
1055 | char *defaultRenderNode = virHostGetDRMRenderNode();
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
After the split of enum functions into virenum.h,
this function does not contain anything worth including
in another header file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include unistd.h in all files that use it, instead
of relying on it being pulled in via virutil.h
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the introduction of virenum.h in commit 285c5f28c4,
it is only needed in the C file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing in the vircgroup.h header file
requiring virutil.h.
Remove it and include unistd.h in the C files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These tests do not use anything from virutil.h
apart from the transitive include.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Prefer g_ascii_xdigit_value to virHexToBin.
Check the return value of the function and
remove the g_ascii_isxdigit calls, since
they're done anyway internally.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When moving virclosecallbacks to src/hypervisor, I did not
adjust all the possible includes in Makefiles.
Use a path relative to src to fix the build.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 25c29ac2f5
This *is* a no-op, but there was a period of sickening dread while
auditing to be sure that no actual confusion between bus and slot had
occurred. I hope to avoid that by following the conventional order.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Reduce the complexity by isolating loop bodies in separate functions.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Pull the code for registering and unregistering a bhyve monitor object
into separate functions to improve code clarity.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
This makes lifecycle management a bit easier thanks to ref counting, and
it is closer to what the qemu driver does.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
