IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the user of the 'docBuilder' class provides a dict (key is API name,
value is a tuple of arrays (acls, aclfilters), use the dict to generate
ACL definitions into the function definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For unmanaged ethernet <interface/>, it is user's responsibility
to set up the interface. And as such it can be just anything.
Therefore, it's (almost) impossible for the
virDomainInterfaceStats() API to tell whether RX/TX values need
to be swapped or copied verbatim into the return structure.
Document this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When fetching stats for a domain's <interface/>, or when setting
up its QoS, we can face two situations:
1) the device "shares" the host view, meaning each packet
sent/received on the interface by a domain is accounted for in
the same category on the host, or
2) the device is at the other side, and a packet send by a
domain, is in fact packet received on the host.
This fact affects whether we need to swap RX/TX values when
fetching stats, or setting up QoS. We have this convenient helper
function (virDomainNetTypeSharesHostView()), which returns to
which category given interface type falls into.
Now, for unmanaged type='ethernet' our options are quite limited,
because it's user's responsibility to set up the host side of the
interface. And it can be just anything. Fortunately, we have
another convenience function (virNetDevMacVLanIsMacvtap()), which
determines whether given interface is a macvtap (which is
notoriously known for falling into the first category).
Let's use it to help virDomainNetTypeSharesHostView() determine
the view more accurately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2175449
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit 068efae5b1 created a copy of this code instead of
simply moving it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Setting the LIBVIRT_SKIP_CLEANUP environment variable results
in the contents of fakerootdir being preserved for inspection.
Be more helpful towards the developer and print out the path
in this case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Instead of having each test manually initialize and cleanup
its own fakerootdir, do that as part of the common test
initialization logic in virTestMain().
In most cases we can simply drop the relevant code from the
test program, but scsihosttest uses the value of fakerootdir
as a starting point to build another path, so we need to do
things slightly differently. In order to keep things working,
we retrieve the value from the LIBVIRT_FAKE_ROOT_DIR
environment variable, same as all the mock libraries are
already doing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Most replacements are completely straightforward but
vircgrouptest requires slightly different handling because,
instead of initializing a single fakerootdir at the start of
the test program and cleaning it up at the end, it creates
multiple different ones one after the other.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We have this logic open-coded all over the test suite. Provide
proper helpers implementing it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All of the drivers will reject this value, at least for now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Take the information from the descriptor and store it in the
domain definition. Various things, such as the arguments passed
to -blockdev and the path generated for the NVRAM file, will
then be based on it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user has requested a specific firmware format, then
all firmware builds that are not in that format should be
ignored while looking for matches.
The legacy hardcoded firmware list predates firmware
descriptors and their "format" field, so we can safely
assume that all builds listed in there are in raw format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This ensures that, as we add support for more formats at the
domain XML level, we don't accidentally cause drivers to
misbehave or users to get confused.
All existing drivers support the raw format, and supporting
additional formats will require explicit opt-in on the
driver's part.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The default is raw, which corresponds to the historical
behavior and is also the only accepted value, at least for
now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, this results in loader->nvram being NULL, which is
reasonable: loader->nvramTemplate is stored separately, so if
the <nvram> element doesn't contain a path there is really no
useful information inside it.
However, this is about to change, so we will find ourselves
needing to hold on to loader->nvram even when no path is
present. Change the firmware handling code so that such a
scenario is dealt with appropriately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This helper replaces qemuDomainNVRAMPathFormat() and also
incorporates some common operations that all callers of that
helper needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, firmware selection is performed as part of the
domain startup process. This mostly works fine, but there's a
significant downside to this approach: since the process is
affected by factors outside of libvirt's control, specifically
the contents of the various JSON firmware descriptors and
their names, it's pretty much impossible to guarantee that the
outcome is always going to be the same. It would only take an
edk2 update, or a change made by the local admin, to render a
domain unbootable or downgrade its boot security.
To avoid this, move firmware selection to the postparse phase.
This way it will only be performed once, when the domain is
first defined; subsequent boots will not need to go through
the process again, as all the paths that were picked during
firmware selection are recorded in the domain XML.
Care is taken to ensure that existing domains are handled
correctly, even if their firmware configuration can't be
successfully resolved. Failure to complete the firmware
selection process is only considered fatal when defining a
new domain; in all other cases the error will be reported
during startup, as is already the case today.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we ignore all firmwares that are not in raw format
while performing autoselection, we can have descriptors for
firmware builds in QCOW2 format without breaking anything.
Note that the descriptors are arranged so that they have the
highest priority on aarch64, but the lowest one on x86_64.
This matches the expectation that QCOW2 will quickly be
adopted as the default on aarch64, where its use produces
significant benefits in terms of memory usage, while x86_64
will likely stick with raw for the foreseeable future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, if the descriptor with the highest priority happens
to describe a firmware in a format other than raw, no domain
that uses autoselection will be able to start.
A better approach is to filter out descriptors that advertise
unsupported formats during autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, if SMM is explicitly disabled in the domain XML
but a firmware descriptor that requires SMM to be enabled has
the highest priority and otherwise matches the requirements,
we pick that firmware only to error out later, when the domain
is started.
A better approach is to take into account the fact that SMM is
disabled while performing autoselection, and ignore all
descriptors that advertise the requires-smm feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already clear os.firmware, so it doesn't make sense to keep
the list of features around.
Moreover, our validation routines will reject an XML that
contains a list of firmware features but disables firmware
autoselection, so not clearing these means that the live XML
for a domain that uses feature-based autoselection can't be
fed back into libvirt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't make sense for non-local sources, since we can't
create or reset the corresponding NVRAM file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes the code more compact and less awkward.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we just allocate the object, so the only advantage is
that invocations are shorter and look a bit nicer.
Later on, its introduction will pay off by letting us change
things in a single spot instead of all over the library.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already handle the <nvram> element in a separate helper,
which is cleaner than having all the logic in the top-level
virDomainLoaderDefParseXML() function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the boot related parts of qemuDomainDefPostParse()
to a separate helper.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the machine type related parts of
qemuDomainDefPostParse() to a separate helper.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover scenarios such as using the new, more verbose
format of the <nvram> element to point to a local path, mixing
firmware autoselection with non-local NVRAM files, and
explicitly disabling SMM when using firmware autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some of the test cases had only been added to the xml2argv
test program and not to the xml2xml one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the differences, such as those in the domain name or
amount of memory, are fairly harmless, but they still make it
more cumbersome than necessary to directly compare different
input (and output) files.
More importantly, the use of unversioned machine types in some
of the test cases results in the descriptor-based autoselection
logic being effectively skipped, because the compatible machine
types as listed in them are only the versioned variants.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most test cases are on 64-bit architectures already, but there
are a couple of exceptions.
Right now this works, but it will no longer fly after some
upcoming changes. Prepare for those by switching away from
32-bit architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already do this in qemuxml2argvtest.
Right now setting this doesn't change anything, but it will
become relevant later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting (some) external helpers, callers of
qemuSecurityCommandRun() pass &exitstatus variable, to learn the
exit code of helper process (with qemuTPMEmulatorStart() being
the only exception). Then, if the status wasn't zero they produce
a generic error message, like:
"Starting of helper process failed. exitstatus=%d"
or, in case of qemuPasstStart():
"Could not start 'passt': %s"
This is needless as virCommandRun() (that's called under the
hood), can do both for us, if NULL was passed instead of
@exitstatus. Not only it appends exit status, it also reads
stderr of failed command producing comprehensive error message:
Child process (${args}) unexpected exit status ${exitstatus}: ${stderr}
Therefore, pass NULL everywhere. But in contrast with one of
previous commits which removed @cmdret argument, there could be a
sensible caller which might want to process exit code. So keep
the argument for now and just pass NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every single caller of qemuSecurityCommandRun() calls the
function as:
if (qemuSecurityCommandRun(..., &cmdret) < 0)
goto cleanup;
if (cmdret < 0)
goto cleanup;
(modulo @exitstatus shenanigans)
Well, there's no need for such complication. There isn't a single
caller (and probably will never be (TM)), that would need to
distinguish the reason for the failure. Therefore,
qemuSecurityCommandRun() can be made to pass the retval of
virCommandRun() called under the hood.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The usual pattern when starting a helper daemon is:
if (qemuSecurityCommandRun(..., &exitstatus, &cmdret) < 0)
goto cleanup;
if (cmdret < 0 || exitstatus != 0) {
virReportError();
goto cleanup;
}
The only problem with this pattern is that if virCommandRun()
fails (i.e. cmdret < 0), then proper error was already reported.
But in this pattern we overwrite it (usually with less specific)
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Way back, in v6.2.0-rc1~67 we removed the code that reads slirp's
stderr on failed startup. However, we forgot to remove
corresponding virCommandSetErrorFD() call and variable
declaration. Do that now.
While this may seem like a step in wrong direction (we should be
reading stderr as it may contain reason for failed start), this
is going to be handled in more general way in next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SUSE installs edk2 firmwares for both x86_64 and aarch64 in /usr/share/qemu.
Add support for this path in virt-aa-helper and allow locking files within
the path in the libvirt qemu abstraction.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The function is used only inside qemu_domain.c, unexport it and move it
above its user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Originally the code was skipping all repeated taints with the same taint
flag but a logic bug introduced in commit 30626ed15b inverted
the condition. This caused that actually the first occurence was NOT
logged but any subsequent was.
This was noticed when going through oVirt logs as they use custom guest
agent commands and the logs are totally spammed with this message.
Fixes: 30626ed15b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Outline what the function does, especially the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
