IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -audiodev arg is a new way to configure audio devices in QEMU to
replace the QEMU_AUDIO_DRV env variable. This arg is not visible in
the "query-command-line-options" output since it is entirely QAPI
driven, not QemuOpts. It also isn't in "query-qmp-schema" though
since there's no QMP command that uses the Audiodev type yet.
So probe for the existance of this feature by looking for the
-vnc "audiodev" property. This won't let us determine which
precise audio backends QEMU has been built with, but for now
that's no worse than with env variables today.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
- VNC - set to "none", unless passthrough of host env variable is set
- SPICE - always set to "spice"
- SDL - always passthrough host env
- No graphics - set to "none", unless passthrough of host env variable is set
The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.
If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainDefFindAudioForSound only takes a virDomainSoundDefPtr as
its arg, but we want to use the same functionality for VNC graphics.
In addition if audio ID is zero, then we want to return the first
available audio backend.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Validate that if a non-zero audio ID is given for <sound> or <graphics>
elements, it must map to an <audio> backend that exists.
Validate that audio IDs given in <audio> are unique.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When there are multiple <audio> backends specified, it is possible to
assign a specific one to the VNC server using
<graphics type='vnc'...>
<audio id='1'/>
</graphics>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current <audio> element only allows an "OSS" audio backend, as this
is all that BHyve needed. This is now extended to cover most QEMU audio
backends. These backends all have a variety of attributes they support,
but this initial impl does the bare minimum, relying on built-in
defaults for everything. The only QEMU backend omitted is "dsound" since
the libvirt QEMU driver is not built on Windows platforms.
The SDL audio driver names are based on the SDL 2.0 drivers. It is not
intended to support SDL 1.2 drivers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To prepare for the introduction for more backend specific audio options,
move the OSS options into a dedicated struct and introduce separate
helper methods for parse/format/free.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The attributes on the elements are optional, so we should not force the
elements themselves to be present, especially since we omit them when
formating the XML thus breaking round-tripping.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Check for varuous mandatory elements and improve error message
clarity
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We had a copy and paste mistake from code we mirrored from QEMU, as well
as failing to remove an earlier redundant check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds delay time (steal time inside guest) to libvirt
domain per-vcpu stats. Delay time is an important performance metric.
It is a consequence of the overloaded CPU. Knowledge of the delay
time of a virtual machine helps to understand if it is affected and
estimate the impact.
As a result, it is possible to react exactly when needed and
rebalance the load between hosts. This is used by cloud providers
to provide quality of service, especially when the CPU is
oversubscribed.
It's more convenient to work with this metric in a context of a
libvirt domain. Any monitoring software may use this information.
Signed-off-by: Aleksei Zakharov <zaharov@selectel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The preprocessor macro we use to check whether we're on Linux
has not been spelled properly, and so we will always report the
error message intended for other platforms.
Fixes: 879bcee08c
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Failure of 'qemuMigrationSetDBusVMState' would jump to 'exit_monitor'
but the function isn't called inside of the monitor context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The value is used as return value for the process itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Allow the directory to be chosen at installation time, to support local
conventions e.g. versioning.
Signed-off-by: Chris Mayo <aklhfex@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When generating TC rules for domain's outbound traffic, Libvirt
will use the 'average' as the default for 'burst' - it's been
this way since the feature introduction in v0.9.4-rc1~22. The
reason is that 'average' considers 'burst' for policing. However,
when parsing its command line TC uses an unsigned int (with
overflow detection) to store the 'burst' size. This means, that
the upper limit for the value is UINT_MAX, well UINT_MAX / 1024
because we are putting the value in KiB onto the command line.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912210
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Up until now we've implicitly relied on the fact that failures
reported from this function were simply ignored, but that's
about to change and so we need a proper mock.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That's more consistent with our usual naming convention.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This behavior reflects the needs of the QEMU driver and has no
place in a generic module such as virProcess.
Thanks to the changes made with the previous commit, it is now
safe to remove these checks and make all virProcessSetMax*()
functions finally behave the same way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code is written under the assumption that, for all
limits except the core size, asking for the limit to be set to
zero is a no-op, and so the operation is performed
unconditionally.
While this is the behavior we want for the QEMU driver, the
virCommand and virProcess facilities are generic, and should not
implement this kind of policy: asking for a limit to be set to
zero should result in that limit being set to zero every single
time.
Add some checks in the QEMU driver, effectively moving the
policy where it belongs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently this only happens for the core size, but we want the
behavior to be consistent for other limits as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuProcessLaunch() is the correct place to set process limits,
and in fact is where we were dealing with almost all of them,
but the memory locking limit was handled in
qemuBuildCommandLine() instead for some reason.
The code is rewritten so that the desired limit is calculated
and applied in separated steps, which will help with further
changes, but this doesn't alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Doing this now will make the next changes nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions abstract part of the existing logic, which is
the same in all virProcessSetMax*() functions, and changes it
so that which underlying syscall is used depends on their
availability rather than on the context in which they are
called: since prlimit() and {g,s}etrlimit() have slightly
different requirements, using the same one every single time
should make for a more consistent experience.
As part of the change, we also remove the special case for
passing zero to virProcessSetMax*() functions: we have removed
all callers that depended on that functionality in the previous
commit, so this is now safe to do and makes the semantics
simpler.
This commit is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the functions accept either an explicit pid or zero,
in which case the current process should be modified: the latter
might sound like a convenient little feature, but in reality
obtaining the pid of the current process is a single additional
function call away, so it hardly makes a difference.
Removing the few cases in which we're passing zero will allow us
to simplify and improve the functions later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <graphics type="vnc" .... powerControl="yes"/> option instructs the
VNC server to enable an extension that lets the client perform a
graceful shutdown, reboot and hard reset.
This is enabled by default since it cannot be assumed that the VNC
client user has administrator rights over the guest OS. In the case
where the VNC user is a guest administrator though, it is reasonable
to allow direct power control host side too.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Calling a stub should always result in ENOSYS being raised,
regardless of what arguments are passed to it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to change their behavior, so it's good to have the
current one documented to serve as baseline.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For reasons unknown, when rewriting this code and dropping
libdevmapper I've mistakenly used incorrect length of dm.name. In
linux/dm-ioctl.h the dm_ioctl struct is defined as follows:
#define DM_NAME_LEN 128
struct dm_ioctl {
...
char name[DM_NAME_LEN]; /* device name */
...
};
However, when copying string into this member, DM_TABLE_DEPS was
used, which is defined as follows:
#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
After decryption, this results in the following size: 3241737483.
Fixes: 2249455654
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:
../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit bbc25f0d03 juggled around some
error reporting. Unfortunately virFirewallApply tries to report the
errno stored in the firewall object and we'd try to do that when the
firewall object is NULL too. Report EINVAL if 'firewall' is NULL.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's an optimization in virBufferAdd which returns early when the
length of the added string is 0 (given that auto-indent is disabled).
The optimization causes inconsistent behaviour between these two cases:
virBufferAdd(buf, "", 0); // this doesn't initialize the buffer
and
virBufferAdd(buf, "", -1); //this initializes the buffer
Since using an empty string is used to prime the buffer to an empty
string it can be confusing. Remove the optimization.
This fixes such a wrong initialization done in x86FeatureNames.
Note that our code in many places expects that if no virBuffer APIs are
used on a buffer object, then NULL should be retured, so we can't always
prime the buffer to an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases we use -1 for failure internally we still must return
EXIT_FAILURE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the logic picking which element form to format by using
virBuffers for the partial properties and virXMLFormatElement for
combining them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use an allocated buffer for 'cpu_header' so that g_strdup(_printf) can
be used to fill it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a dynamic string helper so that we don't have to calculate the
string lengths and then iterate from the rear.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can remove the check that 'idx' is negative by forcing callers to
pass unsigned numbers, which they do already or have a check that 'idx'
is positive.
This in turn allows us to remove most return value NULL checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to automatically feed a buffer into a pipe which
can be used by the command to read contents of the buffer.
Rather than passing in a pipe, let's create the pipe inside
virCommandSetSendBuffer and directly associate the reader end with the
command. This way the ownership of both ends of the pipe will end up
with the virCommand right away reducing the need of cleanup in callers.
The returned value then can be used just to format the appropriate
arguments without worrying about cleanup or failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail nowadays. Remove the return value and adjust the
only caller which ensures that @cmd is non-NULL and @fd is positive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
