IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The search.cpan.org site is a transparent redirect to metacpan.org these
days, so we should just point directly to the new site.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On the modern internet it is not credible to continue to advertize
software downloads over unencrypted connections. Even if users could
theoretically use GPG to verify the signatures, not all our downloads
are signed and few people know how to correctly verify signatures.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are a few differences, but the one we're interested in is
that PCIe Root Ports are finally available: as a result of this,
our riscv64-virt-headless guest will switch from virtio-mmio to
virtio-pci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The rules are the same for all virt guests, regardless of the
architecture.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Our PCIe topology depends on the availability of PCIe Root Ports,
so if none of the suitable devices (pcie-root-port, ioh3420) is
compiled into QEMU we should fall back to virtio-mmio rather than
trying to use PCI addresses only to fail immediately afterwards
when we realize we can't use the necessary controllers.
Note that this additional check is basically moot for ARM virt
guests, because PCIe Root Ports were enabled in QEMU builds for
the architecture well before guest OS support had been widely
available; however, the opposite is true for RISC-V, and tweaking
the code this way will allow us to share it between architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If the console was disconnected due to a connection problem or a problem on the
server side it is convinient to provide the cause to the user. If the error
come from the API then the error is saved in a virsh global variable. However,
since success is returned from virshRunConsole after we reach the waiting stage,
then the error is never reported. Let's track the error in the event loop.
Next after failure we do a cleanup and this cleanup can overwrite
root cause. Thus let's save root cause immediately and then set it to
virsh error after all cleanup is done.
Since we'll be sending the error to the consumer, each failure path from
the event handlers needs to be augmented to provide what error generated
the failure.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
On error in main thread virConsoleShutdown is called which
deletes fd watches/stream callback and yet callbacks can
be called after. Thus we can incorrectly allocate
terminalToStream.data memory and get memory leak for example.
Let's check if console was shutdown in the very beginning of
callbacks.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Stream/fd callbacks accessing console object are called from the
event loop thread and the console object is also accessed from
the main thread so we are better add locking to handlers.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We only check now for virObjectWait failures in virshRunConsole but
we'd better check and for other failures too. And we need to shutdown
console on error in the main thread.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We need to turn console into virObject object because stream/fd callbacks
can be called from the event loop thread after freeing console
in main thread. It is convinient to turn into virLockableObject as
we have mutex in console object.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Since the STOP event handler can use the pausedReason as sent to
qemuProcessStopCPUs, we no longer need to send duplicate suspended
lifecycle events because we know what caused the stop along with extra
details. This processing allows us to also remove the duplicated state
change from qemuProcessStopCPUs.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Map is based on existing cases in code where we send suspended
event after changing domain state to paused.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Similar to commit [1] which saves and passes the running reason to
the RESUME event handler, during qemuProcessStopCPUs let's save and pass
the pause reason in the domain private data so that the STOP event
handler can use it.
[1] 5dab984ed : qemu: Pass running reason to RESUME event handler
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If there are two concurrent threads, one of which is removing an
nwfilter from the list and the other is trying to add it back they
may serialize in the following order:
1) obj->removing is set and @obj is unlocked.
2) The tread that's trying to add the nwfilter onto the list locks
the list and tries to find, if the nwfilter already exists.
3) Our lookup functions say it doesn't, so the thread proceeds to
virHashAddEntry() which fails with 'Duplicate key' error.
This is obviously not helpful error message at all.
The problem lies in our lookup function
(virNWFilterBindingObjListFindByPortDevLocked()) which return
NULL even if the object is still on the list. They do this so
that the object is not mistakenly looked up by some API. The fix
consists of moving 'removing' check one level up and thus
allowing virNWFilterBindingObjListAddLocked() to produce
meaningful error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If there are two concurrent threads, one of which is removing a
domain from the list and the other is trying to add it back they
may serialize in the following order:
1) vm->removing is set and @vm is unlocked.
2) The tread that's trying to add the domain onto the list locks
the list and tries to find, if the domain already exists.
3) Our lookup functions say it doesn't, so the thread proceeds to
virHashAddEntry() which fails with 'Duplicate key' error.
This is obviously not helpful error message at all.
The problem lies in our lookup functions
(virDomainObjListFindByUUIDLocked() and
virDomainObjListFindByNameLocked()) which return NULL even if the
object is still on the list. They do this so that the object is
not mistakenly looked up by some driver. The fix consists of
moving 'removing' check one level up and thus allowing
virDomainObjListAddLocked() to produce meaningful error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Add native guest format of BSD hypervisor and VMware/ESX. Quote native
guest format of domxml-from-native for domxml-to-native.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Parsing of the cpu affinity list was using virParseNumber. Modernize it
to get rid of the virParseNumber call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1693066
Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper returns the default hugetlbfs mount point from given
array of mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current location looks very arbitrary. Move it to the end of
the mymain() function so it is less confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are three test XMLs that have useless spaces at the
beginning of each line. I intend to add these to qemuxml2xmltest
and make xmlout a symlink to the original XML. In order to do
that the XMLs must look better than they do now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Should have been part of 2569ba1338, but clearly wasn't.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libssh2 support in libvirt is not solely for phyp, it is used by the
remote driver too.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 66460e3 dropped support for YAJL 1, we no longer need
these.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Also switch the expected output of DO_TEST_PARSE_FILE to be
in a file, now that we demonstrated the input files match
the expected string representation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce a new macro DO_TEST_PARSE_FILE which takes the input JSON
from a file instead of a C string.
This lets us get rid of quote escaping and makes the JSON easier to
edit.
The output JSON is still taken from a string and will be moved
separately.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Instead of using JSON in C strings, put it in separate files
for easier manipulation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We do not care about the portability warnings implied by the implicit
'gnu' option. Switch to 'foreign' to opt out of checking the files
present in the top directory to let us drop ChangeLog completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even Ubuntu 16.04 has automake 1.11.
Now that we no longer cater to automake 1.9, drop the comment
as well as the -Wno-obsolete option, since it does not seem to generate
any warnings anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we do not need to cater to YAJL 1, move the check for the
return value of yajl_gen_alloc earlier, so that we can assume it
was successful in later code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we require YAJL2, drop the code dealing with YAJL 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The pkg-config file was introduced by commit b729ded which was released
in yajl 2.0.3.
Since all our supported platforms include at least yajl 2.0.4,
use pkg-config to detect the library and set the minimum to 2.0.3.
https://repology.org/project/yajl/versions
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even Debian 8 which we no longer support has 2.1.26.
https://repology.org/project/cyrus-sasl/versions
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuMigrationSrcPerform callers expect it to call virDomainObjEndAPI
in any case so on error paths we miss the virDomainObjEndAPI call.
To fix this let's make qemuMigrationSrcPerform callers responsible
for the virDomainObjEndAPI call.
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
