Release of 0.9.11.1 stable

qemu: Avoid bogus error at the end of tunnelled migration
Once qemu monitor reports migration has completed, we just closed our end of the pipe and let migration tunnel die. This generated bogus error in case we did so before the thread saw EOF on the pipe and migration was aborted even though it was in fact successful. With this patch we first wake up the tunnel thread and once it has read all data from the pipe and finished the stream we close the filedescriptor. A small additional bonus of this patch is that real errors reported inside qemuMigrationIOFunc are not overwritten by virStreamAbort any more.
2025-09-20 05:44:53 +03:00 · 2012-04-26 14:49:12 -04:00 · 2012-04-26 14:16:00 -04:00 · 2012-04-26 14:15:35 -04:00 · 2012-04-26 14:15:28 -04:00 · 2012-04-26 14:14:55 -04:00
11853 changed files with 2540391 additions and 2481536 deletions
--- a/.color_coded.in
+++ b/.color_coded.in
@@ -1,38 +0,0 @@
-I@abs_top_builddir@
-I@abs_top_srcdir@
-I@abs_top_builddir@/include
-I@abs_top_srcdir@/include
-I@abs_top_builddir@/src
-I@abs_top_srcdir@/src
-I@abs_top_builddir@/src/access
-I@abs_top_srcdir@/src/access
-I@abs_top_builddir@/src/admin
-I@abs_top_srcdir@/src/admin
-I@abs_top_builddir@/src/bhyve
-I@abs_top_srcdir@/src/bhyve
-I@abs_top_builddir@/src/conf
-I@abs_top_srcdir@/src/conf
-I@abs_top_builddir@/src/libxl
-I@abs_top_srcdir@/src/libxl
-I@abs_top_builddir@/src/locking
-I@abs_top_srcdir@/src/locking
-I@abs_top_builddir@/src/logging
-I@abs_top_srcdir@/src/logging
-I@abs_top_builddir@/src/lxc
-I@abs_top_srcdir@/src/lxc
-I@abs_top_builddir@/src/qemu
-I@abs_top_srcdir@/src/qemu
-I@abs_top_builddir@/src/remote
-I@abs_top_srcdir@/src/remote
-I@abs_top_builddir@/src/rpc
-I@abs_top_srcdir@/src/rpc
-I@abs_top_builddir@/src/secret
-I@abs_top_srcdir@/src/secret
-I@abs_top_builddir@/src/security
-I@abs_top_srcdir@/src/security
-I@abs_top_builddir@/src/util
-I@abs_top_srcdir@/src/util
-I@abs_top_builddir@/src/vmx
-I@abs_top_srcdir@/src/vmx
-I@abs_top_builddir@/src/xenconfig
-I@abs_top_srcdir@/src/xenconfig
--- a/.ctags
+++ b/.ctags
@@ -1,6 +0,0 @@
--recurse
--exclude=*.orig
--exclude=*.html
--exclude=*.html.in
--langmap=c:+.h.in
--c-kinds=+p
--- a/.ctags.d/libvirt.ctags
+++ b/.ctags.d/libvirt.ctags
@@ -1 +0,0 @@
-../.ctags
--- a/.dir-locals.el
+++ b/.dir-locals.el
@@ -14,7 +14,4 @@
 (nxml-mode . (
 	       (indent-tabs-mode . nil)
 	       ))
- (perl-mode . (
-	       (indent-tabs-mode . nil)
-	       ))
 )
--- a/.editorconfig
+++ b/.editorconfig
@@ -1,21 +0,0 @@
-# EditorConfig is a file format and collection of text editor plugins
-# for maintaining consistent coding styles between different editors
-# and IDEs. Most popular editors support this either natively or via
-# plugin.
-#
-# Check https://editorconfig.org for details.
-
-root = true
-
-[*]
-end_of_line = lf
-insert_final_newline = true
-charset = utf-8
-
-[*.c]
-indent_style = space
-indent_size = 4
-
-[*.{rng,xml}]
-indent_style = space
-indent_size = 2
--- a/.github/lockdown.yml
+++ b/.github/lockdown.yml
@@ -1,38 +0,0 @@
-# Configuration for Repo Lockdown - https://github.com/dessant/repo-lockdown
-
-skipCreatedBefore: 2020-01-01
-
-# Close issues and pull requests
-close: true
-
-# Lock issues and pull requests
-lock: true
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-issues:
-  comment: |
-    Thank you for your interest in the libvirt project.
-
-    Since this repository is a read-only mirror of the project's master repostory hosted on GitLab, issues opened here are not processed.
-
-    We kindly request that new issues are reported to
-
-      https://gitlab.com/libvirt/libvirt/-/issues/new
-
-    Thank you for your time and understanding.
-
-pulls:
-  comment: |
-    Thank you for your interest in the libvirt project.
-
-    Since this repository is a read-only mirror of the project's master repostory hosted on GitLab, merge requests opened here are not processed.
-
-    We kindly request that contributors fork the project at
-
-      https://gitlab.com/libvirt/libvirt/
-
-    push changes to the fork, and then open a new merge request at
-
-      https://gitlab.com/libvirt/libvirt/-/merge_requests/new
-
-    Thank you for your time and understanding.
--- a/.gitignore
+++ b/.gitignore
@@ -1,40 +1,175 @@
-# vim related ignores
-*.swp
-.lvimrc
-
-# emacs related ignores
 *#*#
 *.#*#
-.#*
-*~
-
-# autotools related ignores
-!/m4/virt-*.m4
+*.a
 *.cov
-/AUTHORS
+*.exe
+*.gcda
+*.gcno
+*.gcov
+*.html
+*.i
+*.la
+*.lo
+*.loT
+*.o
+*.orig
+*.pyc
+*.rej
+*.s
+*~
+.deps
+.git
+.git-module-status
+.libs
+.lvimrc
+.memdump
+.sc-start-sc_*
+/ABOUT-NLS
+/COPYING
+/ChangeLog
+/GNUmakefile
 /INSTALL
+/NEWS
 /aclocal.m4
 /autom4te.cache
-/build-aux/compile
-/build-aux/config.guess
-/build-aux/config.sub
-/build-aux/depcomp
-/build-aux/install-sh
-/build-aux/ltmain.sh
-/build-aux/missing
-/build-aux/test-driver
+/build-aux
+/build-aux/
+/build/
+/config.cache
+/config.guess
+/config.h
 /config.h.in
 /config.log
+/config.rpath
+/config.status
+/config.sub
 /configure
+/configure.lineno
+/daemon/*_dispatch.h
+/daemon/libvirt_qemud
+/daemon/libvirtd
+/daemon/libvirtd.init
+/daemon/libvirtd.service
+/daemon/libvirtd*.logrotate
+/daemon/libvirtd.8
+/daemon/libvirtd.8.in
+/daemon/libvirtd.pod
+/docs/devhelp/libvirt.devhelp
+/docs/hvsupport.html.in
+/docs/libvirt-api.xml
+/docs/libvirt-qemu-*.xml
+/docs/libvirt-refs.xml
+/docs/todo.html.in
+/examples/domain-events/events-c/event-test
+/examples/dominfo/info1
+/examples/domsuspend/suspend
+/examples/hellolibvirt/hellolibvirt
+/examples/openauth/openauth
+/gnulib/lib/*
+/gnulib/m4/*
+/gnulib/tests/*
+/include/libvirt/libvirt.h
+/libtool
+/libvirt-*.tar.gz
+/libvirt-[0-9]*
+/libvirt.pc
+/libvirt.spec
+/ltconfig
+/ltmain.sh
 /m4/*
+/maint.mk
+/mingw32-libvirt.spec
+/mkinstalldirs
+/po/*
+/proxy/
+/python/generated.stamp
+/python/generator.py.stamp
+/python/libvirt-export.c
+/python/libvirt-qemu-export.c
+/python/libvirt-qemu.[ch]
+/python/libvirt.[ch]
+/python/libvirt.py
+/python/libvirt_qemu.py
+/sc_*
+/src/esx/*.generated.*
+/src/hyperv/*.generated.*
+/src/libvirt*.def
+/src/libvirt.syms
+/src/libvirt_*.stp
+/src/libvirt_*helper
+/src/libvirt_lxc
+/src/locking/qemu-sanlock.conf
+/src/probes.h
+/src/remote/*_client_bodies.h
+/src/remote/*_protocol.[ch]
+/src/rpc/virkeepaliveprotocol.[ch]
+/src/rpc/virnetprotocol.[ch]
+/src/util/virkeymaps.h
+/src/virt-aa-helper
+/tests/*.log
+/tests/*.pid
+/tests/*xml2*test
+/tests/commandhelper
+/tests/commandtest
+/tests/conftest
+/tests/cputest
+/tests/domainsnapshotxml2xmltest
+/tests/esxutilstest
+/tests/eventtest
+/tests/hashtest
+/tests/jsontest
+/tests/networkxml2argvtest
+/tests/nodeinfotest
+/tests/nwfilterxml2xmltest
+/tests/object-locking
+/tests/object-locking-files.txt
+/tests/object-locking.cm[ix]
+/tests/openvzutilstest
+/tests/qemuargv2xmltest
+/tests/qemuhelptest
+/tests/qemumonitortest
+/tests/qemuxmlnstest
+/tests/qparamtest
+/tests/reconnect
+/tests/secaatest
+/tests/seclabeltest
+/tests/sexpr2xmltest
+/tests/shunloadtest
+/tests/sockettest
+/tests/ssh
+/tests/statstest
+/tests/utiltest
+/tests/virauthconfigtest
+/tests/virbuftest
+/tests/virhashtest
+/tests/virkeyfiletest
+/tests/virnet*test
+/tests/virshtest
+/tests/virtimetest
+/tests/viruritest
+/tests/vmx2xmltest
+/tests/xencapstest
+/tests/xmconfigtest
+/tools/*.[18]
+/tools/libvirt-guests.init
+/tools/virsh
+/tools/virsh-*-edit.c
+/tools/virt-*-validate
+/tools/virt-sanlock-cleanup
+/update.log
+Makefile
 Makefile.in
-
-# git related ignores
-*.rej
-*.orig
-.git-module-status
-
-# libvirt related ignores
-/build/
-/ci/scratch/
-tags
+TAGS
+coverage
+cscope.files
+cscope.out
+results.log
+stamp-h
+stamp-h.in
+stamp-h1
+!/gnulib/lib/Makefile.am
+!/gnulib/tests/Makefile.am
+!/m4/virt-*.m4
+!/po/*.po
+!/po/POTFILES.in
+!/po/libvirt.pot
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,235 +0,0 @@
-variables:
-  GIT_DEPTH: 100
-
-stages:
-  - prebuild
-  - native_build
-  - cross_build
-
-.script_variables: &script_variables |
-  export MAKEFLAGS="-j$(getconf _NPROCESSORS_ONLN)"
-  export CCACHE_BASEDIR="$(pwd)"
-  export CCACHE_DIR="$CCACHE_BASEDIR/ccache"
-  export CCACHE_MAXSIZE="500M"
-  export PATH="$CCACHE_WRAPPERSDIR:$PATH"
-
-# Common templates
-
-# Default native build jobs that are always run
-.native_build_default_job_template: &native_build_default_job_definition
-  stage: native_build
-  cache:
-    paths:
-      - ccache/
-    key: "$CI_JOB_NAME"
-  before_script:
-    - *script_variables
-  script:
-    - mkdir build
-    - cd build
-    - ../autogen.sh || (cat config.log && exit 1)
-    - $MAKE distcheck
-
-# Extra native build jobs that are only run post-merge, or
-# when code is pushed to a branch with "ci-full-" name prefix
-.native_build_extra_job_template: &native_build_extra_job_definition
-  <<: *native_build_default_job_definition
-  only:
-    - master
-    - /^ci-full-.*$/
-
-
-# Default cross build jobs that are always run
-.cross_build_default_job_template: &cross_build_default_job_definition
-  stage: cross_build
-  cache:
-    paths:
-      - ccache/
-    key: "$CI_JOB_NAME"
-  before_script:
-    - *script_variables
-  script:
-    - mkdir build
-    - cd build
-    - ../autogen.sh $CONFIGURE_OPTS || (cat config.log && exit 1)
-    - $MAKE
-
-# Extra cross build jobs that are only run post-merge, or
-# when code is pushed to a branch with "ci-full-" name prefix
-.cross_build_extra_job_template: &cross_build_extra_job_definition
-  <<: *cross_build_default_job_definition
-  only:
-    - master
-    - /^ci-full-.*$/
-
-
-# Native architecture build + test jobs
-
-x64-debian-9:
-  <<: *native_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-9:latest
-
-x64-debian-10:
-  <<: *native_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-10:latest
-
-x64-debian-sid:
-  <<: *native_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-sid:latest
-
-x64-centos-7:
-  <<: *native_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-centos-7:latest
-
-x64-centos-8:
-  <<: *native_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-centos-8:latest
-
-x64-fedora-31:
-  <<: *native_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-fedora-31:latest
-
-x64-fedora-32:
-  <<: *native_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-fedora-32:latest
-
-x64-fedora-rawhide:
-  <<: *native_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-fedora-rawhide:latest
-
-x64-opensuse-151:
-  <<: *native_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-opensuse-151:latest
-
-x64-ubuntu-1804:
-  <<: *native_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-ubuntu-1804:latest
-
-x64-ubuntu-2004:
-  <<: *native_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-ubuntu-2004:latest
-
-
-# Cross compiled build jobs
-
-armv6l-debian-9:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-9-cross-armv6l:latest
-
-mips64el-debian-9:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-9-cross-mips64el:latest
-
-mips-debian-9:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-9-cross-mips:latest
-
-aarch64-debian-10:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-10-cross-aarch64:latest
-
-ppc64le-debian-10:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-10-cross-ppc64le:latest
-
-s390x-debian-10:
-  <<: *cross_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-10-cross-s390x:latest
-
-armv7l-debian-sid:
-  <<: *cross_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-sid-cross-armv7l:latest
-
-i686-debian-sid:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-sid-cross-i686:latest
-
-mipsel-debian-sid:
-  <<: *cross_build_extra_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-debian-sid-cross-mipsel:latest
-
-mingw32-fedora-rawhide:
-  <<: *cross_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-fedora-rawhide-cross-mingw32:latest
-
-mingw64-fedora-rawhide:
-  <<: *cross_build_default_job_definition
-  image: quay.io/libvirt/buildenv-libvirt-fedora-rawhide-cross-mingw64:latest
-
-
-# This artifact published by this job is downloaded by libvirt.org to
-# be deployed to the web root:
-#    https://gitlab.com/libvirt/libvirt/-/jobs/artifacts/master/download?job=website
-website:
-  stage: prebuild
-  before_script:
-    - *script_variables
-  script:
-    - mkdir build
-    - cd build
-    - ../autogen.sh --prefix=$(pwd)/../vroot || (cat config.log && exit 1)
-    - $MAKE -C docs
-    - $MAKE -C docs install
-    - cd ..
-    - mv vroot/share/doc/libvirt/html/ website
-  image: quay.io/libvirt/buildenv-libvirt-centos-8:latest
-  artifacts:
-    expose_as: 'Website'
-    name: 'website'
-    when: on_success
-    expire_in: 30 days
-    paths:
-      - website
-
-
-codestyle:
-  stage: prebuild
-  before_script:
-    - *script_variables
-  script:
-    - mkdir build
-    - cd build
-    - ../autogen.sh || (cat config.log && exit 1)
-    - $MAKE syntax-check
-  image: quay.io/libvirt/buildenv-libvirt-centos-8:latest
-
-
-# This artifact published by this job is downloaded to push to Weblate
-# for translation usage:
-#    https://gitlab.com/libvirt/libvirt/-/jobs/artifacts/master/download?job=potfile
-potfile:
-  stage: prebuild
-  only:
-    - master
-  before_script:
-    - *script_variables
-  script:
-    - mkdir build
-    - cd build
-    - ../autogen.sh || (cat config.log && exit 1)
-    - $MAKE -C src generated-sources
-    - $MAKE -C po libvirt.pot
-    - cd ..
-    - mv build/po/libvirt.pot libvirt.pot
-  image: quay.io/libvirt/buildenv-libvirt-centos-8:latest
-  artifacts:
-    expose_as: 'Potfile'
-    name: 'potfile'
-    when: on_success
-    expire_in: 30 days
-    paths:
-      - libvirt.pot
-
-
-# Check that all commits are signed-off for the DCO.
-# Skip on "libvirt" namespace, since we only need to run
-# this test on developer's personal forks from which
-# merge requests are submitted
-check-dco:
-  stage: prebuild
-  image: registry.gitlab.com/libvirt/libvirt-ci/check-dco:master
-  script:
-    - /check-dco
-  except:
-    variables:
-      - $CI_PROJECT_NAMESPACE == 'libvirt'
--- a/.gitmodules
+++ b/.gitmodules
@@ -1,3 +1,3 @@
-[submodule "keycodemapdb"]
-	path = src/keycodemapdb
-	url = https://gitlab.com/keycodemap/keycodemapdb.git
+[submodule "gnulib"]
+	path = .gnulib
+	url = git://git.sv.gnu.org/gnulib.git
--- a/.gitpublish
+++ b/.gitpublish
@@ -1,4 +0,0 @@
-[gitpublishprofile "default"]
-base = master
-to = libvir-list@redhat.com
-prefix = libvirt PATCH
--- a/.gnulib
+++ b/.gnulib
--- a/.mailmap
+++ b/.mailmap
@@ -3,12 +3,10 @@
 # Email consolidation:
 # <Preferred address in AUTHORS> <other alias used by same author>

+<amy.griffis@hp.com> <aron.griffis@hp.com>
 <bozzolan@gmail.com> <redshift@gmx.com>
 <charles_duffy@messageone.com> <charles@dyfis.net>
-<claudio.bley@gmail.com> <cbley@av-test.de>
 <dfj@redhat.com> <dfj@dfj.bne.redhat.com>
-<dpkshetty@gmail.com> <deepakcs@linux.vnet.ibm.com>
-<dpkshetty@gmail.com> <deepakcs@redhat.com>
 <eblake@redhat.com> <ebb9@byu.net>
 <gdolley@arpnetworks.com> <gdolley@ucla.edu>
 <gerhard.stenzel@de.ibm.com> <gstenzel@linux.vnet.ibm.com>
@@ -20,6 +18,7 @@
 <jfehlig@suse.com> <jfehlig@novell.com>
 <jfehlig@suse.com> <jfehlig@linux-ypgk.site>
 <jclift@redhat.com> <justin@salasaga.org>
+<berrange@redhat.com> <dan@berrange.com>
 <soren@linux2go.dk> <soren@canonical.com>
 <cfergeau@redhat.com> <teuf@gnome.org>
 <wency@cn.fujitsu.com> <wency cn fujitsu com>
@@ -29,51 +28,8 @@
 <supriyak@linux.vnet.ibm.com> <supriyak@in.ibm.com>
 <neil@aldur.co.uk> <neil@brightbox.co.uk>
 <stefanb@us.ibm.com> <stefanb@linux.vnet.ibm.com>
-<stefanb@us.ibm.com> <stefannb@linux.vnet.ibm.com>
-<josh.durgin@inktank.com> <joshd@hq.newdream.net>
-<josh.durgin@inktank.com> <josh.durgin@dreamhost.com>
-<gerd@egidy.de> <lists@egidy.de>
-<gerd@egidy.de> <gerd.von.egidy@intra2net.com>
-<benoar@dolka.fr> <benjamin.cama@telecom-bretagne.eu>
-<zhlcindy@linux.vnet.ibm.com> <zhlcindy@gmail.com>
-<serge.hallyn@canonical.com> <serue@us.ibm.com>
-<pritesh.kothari@sun.com> <Pritesh.Kothari@Sun.COM>
-<cbosdonnat@suse.com> <cedric.bosdonnat@free.fr>
-<mnestratov@virtuozzo.com> <mnestratov@parallels.com>
-<nshirokovskiy@virtuozzo.com> <nshirokovskiy@parallels.com>
-<jyang@redhat.com> <osier@yunify.com>
-<kkoukiou@redhat.com> <k.koukiou@googlemail.com>
-<intrigeri@boum.org> <intrigeri+libvirt@boum.org>
-<fidencio@redhat.com> <fabiano@fidencio.org>
-<shi_lei@massclouds.com> <shilei.massclouds@gmx.com>
-<adrian.brzezinski@eo.pl> <redhat@adrb.pl>
+<josh.durgin@dreamhost.com> <joshd@hq.newdream.net>

 # Name consolidation:
 # Preferred author spelling <preferred email>
 Alex Jia <ajia@redhat.com>
-Royce Lv <lvroyce@linux.vnet.ibm.com>
-Daniel J Walsh <dwalsh@redhat.com>
-Ján Tomko <jtomko@redhat.com>
-Gerd von Egidy <gerd@egidy.de>
-MATSUDA Daiki <matsudadik@intellilink.co.jp>
-Tang Chen <tangchen@cn.fujitsu.com>
-Peng Zhou <ailvpeng25@gmail.com>
-Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
-Thibault VINCENT <thibault.vincent@smartjog.com>
-Aurelien Rougemont <beorn@binaries.fr>
-Serge E. Hallyn <serge.hallyn@canonical.com>
-Henrik Persson E <henrik.e.persson@ericsson.com>
-Philipp Hahn <hahn@univention.de>
-Pritesh Kothari <pritesh.kothari@sun.com>
-Wang Yufei (James) <james.wangyufei@huawei.com>
-Deepak C Shetty <dpkshetty@gmail.com>
-Dave Allan <dallan@redhat.com>
-Richard W.M. Jones <rjones@redhat.com>
-
-# Non-trivial consolidation:
-# see git documentation for information about the format
-Daniel P. Berrangé <berrange@redhat.com>
-Daniel P. Berrangé <berrange@redhat.com> <dan@berrange.com>
-Michal Prívozník <mprivozn@redhat.com>
-Michal Prívozník <mprivozn@redhat.com> <miso.privoznik@gmail.com>
-Marco Bozzolan <bozzolan@gmail.com> <redshift@gmx.com>
--- a/.travis.yml
+++ b/.travis.yml
@@ -1,58 +0,0 @@
-language: c
-compiler: clang
-os: osx
-
-branches:
-  except:
-    - /^.*-maint$/
-
-addons:
-  homebrew:
-    update: true
-    packages:
-      - ccache
-      - rpcgen
-      - xz
-      - yajl
-      - glib
-      - docutils
-      - gnutls
-
-matrix:
-  include:
-    - osx_image: xcode11.3
-    - osx_image: xcode10.3
-
-env:
-  global:
-    - PATH="/usr/local/opt/gettext/bin:/usr/local/opt/ccache/libexec:/usr/local/opt/rpcgen/bin:$PATH"
-    - PKG_CONFIG_PATH="/usr/local/opt/libxml2/lib/pkgconfig"
-
-before_script:
-  # Hack to blow away py2
-  - brew link --overwrite python
-
-script:
-  # We can't run 'distcheck' or 'syntax-check' because they fail on
-  # macOS, but doing 'install' and 'dist' gives us some useful coverage
-  - mkdir build && cd build
-  - ../autogen.sh --prefix=$(pwd)/install-root && make -j3 && make -j3 install && make -j3 dist
-
-git:
-  submodules: true
-
-notifications:
-  irc:
-    # The channel name "irc.oftc.net#virt" is encrypted against libvirt/libvirt
-    # to prevent IRC notifications from github forks. This was created using:
-    # $ travis encrypt -r "libvirt/libvirt" "irc.oftc.net#virt"
-    channels:
-      - secure: "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"
-    on_success: change
-    on_failure: always
-  email:
-    # The list name 'libvirt-ci@redhat.com" is encrypted against libvirt/libvirt
-    # to prevent IRC notifications from github forks. This was created using:
-    # $ travis encrypt -r "libvirt/libvirt" "libvirt-ci@redhat.com"
-    recipients:
-      - secure: "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"
--- a/.ycm_extra_conf.py.in
+++ b/.ycm_extra_conf.py.in
@@ -1,43 +0,0 @@
-flags = [
-  '-I@abs_top_builddir@',
-  '-I@abs_top_srcdir@',
-  '-I@abs_top_builddir@/include',
-  '-I@abs_top_srcdir@/include',
-  '-I@abs_top_builddir@/src',
-  '-I@abs_top_srcdir@/src',
-  '-I@abs_top_builddir@/src/access',
-  '-I@abs_top_srcdir@/src/access',
-  '-I@abs_top_builddir@/src/admin',
-  '-I@abs_top_srcdir@/src/admin',
-  '-I@abs_top_builddir@/src/bhyve',
-  '-I@abs_top_srcdir@/src/bhyve',
-  '-I@abs_top_builddir@/src/conf',
-  '-I@abs_top_srcdir@/src/conf',
-  '-I@abs_top_builddir@/src/libxl',
-  '-I@abs_top_srcdir@/src/libxl',
-  '-I@abs_top_builddir@/src/locking',
-  '-I@abs_top_srcdir@/src/locking',
-  '-I@abs_top_builddir@/src/logging',
-  '-I@abs_top_srcdir@/src/logging',
-  '-I@abs_top_builddir@/src/lxc',
-  '-I@abs_top_srcdir@/src/lxc',
-  '-I@abs_top_builddir@/src/qemu',
-  '-I@abs_top_srcdir@/src/qemu',
-  '-I@abs_top_builddir@/src/remote',
-  '-I@abs_top_srcdir@/src/remote',
-  '-I@abs_top_builddir@/src/rpc',
-  '-I@abs_top_srcdir@/src/rpc',
-  '-I@abs_top_builddir@/src/secret',
-  '-I@abs_top_srcdir@/src/secret',
-  '-I@abs_top_builddir@/src/security',
-  '-I@abs_top_srcdir@/src/security',
-  '-I@abs_top_builddir@/src/util',
-  '-I@abs_top_srcdir@/src/util',
-  '-I@abs_top_builddir@/src/vmx',
-  '-I@abs_top_srcdir@/src/vmx',
-  '-I@abs_top_builddir@/src/xenconfig',
-  '-I@abs_top_srcdir@/src/xenconfig',
-]
-
-def FlagsForFile(filename, **kwargs):
-  return { 'flags': flags, 'do_cache': True }
--- a/1
+++ b/1
@@ -1 +0,0 @@
-po/README.rst
--- a/244
+++ b/244
@@ -0,0 +1,244 @@
+   libvirt Authors
+   ===============
+
+The libvirt project was initiated by:
+
+  Daniel Veillard      <veillard@redhat.com> or <daniel@veillard.com>
+
+The primary maintainers and people with commit access rights:
+
+  Daniel Veillard      <veillard@redhat.com>
+  Daniel Berrange      <berrange@redhat.com>
+  Richard W.M. Jones   <rjones@redhat.com>
+  Mark McLoughlin      <markmc@redhat.com>
+  Anthony Liguori      <aliguori@us.ibm.com>
+  Jim Meyering         <meyering@redhat.com>
+  Jim Fehlig           <jfehlig@suse.com>
+  Chris Lalancette     <clalance@redhat.com>
+  Cole Robinson        <crobinso@redhat.com>
+  Guido Günther        <agx@sigxcpu.org>
+  John Levon           <john.levon@sun.com>
+  Matthias Bolte       <matthias.bolte@googlemail.com>
+  Jiří Denemark        <jdenemar@redhat.com>
+  Dave Allan           <dallan@redhat.com>
+  Laine Stump          <laine@redhat.com>
+  Stefan Berger        <stefanb@us.ibm.com>
+  Eric Blake           <eblake@redhat.com>
+  Justin Clift         <jclift@redhat.com>
+  Osier Yang           <jyang@redhat.com>
+  Wen Congyang         <wency@cn.fujitsu.com>
+  Michal Prívozník     <mprivozn@redhat.com>
+  Peter Krempa         <pkrempa@redhat.com>
+  Christophe Fergeau   <cfergeau@redhat.com>
+  Alex Jia             <ajia@redhat.com>
+
+Previous maintainers:
+  Karel Zak            <kzak@redhat.com>
+  Atsushi SAKAI        <sakaia@jp.fujitsu.com>
+  Dave Leskovec        <dlesko@linux.vnet.ibm.com>
+  Dan Smith            <danms@us.ibm.com>
+
+Patches have also been contributed by:
+
+  David Lutterkort     <dlutter@redhat.com>
+  Andrew Puch          <apuch@redhat.com>
+  Philippe Berthault   <philippe.berthault@Bull.net>
+  Hugh Brock           <hbrock@redhat.com>
+  Michel Ponceau       <michel.ponceau@bull.net>
+  Jeremy Katz          <katzj@redhat.com>
+  Pete Vetere          <pvetere@redhat.com>
+  Kazuki Mizushima     <mizushima.kazuk@jp.fujitsu.com>
+  Saori Fukuta         <fukuta.saori@jp.fujitsu.com>
+  Tatsuro Enokura      <fj7716hz@aa.jp.fujitsu.com>
+  Takahashi Tomohiro   <takatom@jp.fujitsu.com>
+  Nobuhiro Itou        <fj0873gn@aa.jp.fujitsu.com>
+  Masayuki Sunou       <fj1826dm@aa.jp.fujitsu.com>
+  Mark Johnson         <johnson.nh@gmail.com>
+  Christian Ehrhardt   <ehrhardt@linux.vnet.ibm.com>
+  Shuveb Hussain       <shuveb@binarykarma.com>
+  Jim Paris            <jim@jtan.com>
+  Daniel Hokka Zakrisson <daniel@hozac.com>
+  Mads Chr. Olesen     <shiyee@shiyee.dk>
+  Anton Protopopov     <aspsk2@gmail.com>
+  Stefan de Konink     <dekonink@kinkrsoftware.nl>
+  Kaitlin Rupert       <kaitlin@linux.vnet.ibm.com>
+  Evgeniy Sokolov      <evg@openvz.org>
+  David Lively         <dlively@virtualiron.com>
+  Charles Duffy        <Charles_Duffy@messageone.com>
+  Nguyen Anh Quynh     <aquynh@gmail.com>
+  James Morris         <jmorris@namei.org>
+  Chris Wright         <chrisw@redhat.com>
+  Ben Guthro           <ben.guthro@gmail.com>
+  Shigeki Sakamoto     <fj0588di@aa.jp.fujitsu.com>
+  Gerd von Egidy       <lists@egidy.de>
+  Itamar Heim          <iheim@redhat.com>
+  Markus Armbruster    <armbru@redhat.com>
+  Ryota Ozaki          <ozaki.ryota@gmail.com>
+  Daniel J Walsh       <dwalsh@redhat.com>
+  Maximilian Wilhelm   <max@rfc2324.org>
+  Pritesh Kothari      <Pritesh.Kothari@Sun.COM>
+  Amit Shah            <amit.shah@redhat.com>
+  Florian Vichot       <florian.vichot@diateam.net>
+  Serge E. Hallyn      <serue@us.ibm.com>
+  Soren Hansen         <soren@linux2go.dk>
+  Abel Míguez Rodríguez<amiguezr@pdi.ucm.es>
+  Doug Goldstein       <cardoe@cardoe.com>
+  Javier Fontan        <jfontan@gmail.com>
+  Federico Simoncelli  <fsimonce@redhat.com>
+  Amy Griffis          <amy.griffis@hp.com>
+  Henrik Persson E     <henrik.e.persson@ericsson.com>
+  Satoru SATOH         <satoru.satoh@gmail.com>
+  Paolo Bonzini        <pbonzini@redhat.com>
+  Miloslav Trmač       <mitr@redhat.com>
+  Jamie Strandboge     <jamie@canonical.com>
+  Gerhard Stenzel      <gerhard.stenzel@de.ibm.com>
+  Matthew Booth        <mbooth@redhat.com>
+  Diego Elio Pettenò   <flameeyes@gmail.com>
+  Adam Litke           <agl@us.ibm.com>
+  Steve Yarmie         <steve.yarmie@gmail.com>
+  Dan Kenigsberg       <danken@redhat.com>
+  Yuji NISHIDA         <nishidy@nict.go.jp>
+  Dustin Xiong         <x_k_123@hotmail.com>
+  Rolf Eike Beer       <eike@sf-mail.de>
+  Wolfgang Mauerer     <wolfgang.mauerer@siemens.com>
+  Philipp Hahn         <hahn@univention.de>
+  Ed Swierk            <eswierk@aristanetworks.com>
+  Paolo Smiraglia      <paolo.smiraglia@gmail.com>
+  Sharadha Prabhakar   <sharadha.prabhakar@citrix.com>
+  Chris Wong           <wongc-redhat@hoku.net>
+  Daniel Berteaud      <daniel@firewall-services.com>
+  Dustin Kirkland      <kirkland@canonical.com>
+  Luiz Capitulino      <lcapitulino@redhat.com>
+  Ryan Harper          <ryanh@us.ibm.com>
+  Spencer Shimko       <sshimko@tresys.com>
+  Marco Bozzolan       <bozzolan@gmail.com>
+  Alex Williamson      <alex.williamson@redhat.com>
+  Ersek Laszlo         <lacos@caesar.elte.hu>
+  Kenneth Nagin        <NAGIN@il.ibm.com>
+  Klaus Ethgen         <Klaus@Ethgen.de>
+  Bryan Kearney        <bkearney@redhat.com>
+  Darry L. Pierce      <dpierce@redhat.com>
+  David Jorm           <dfj@redhat.com>
+  Eduardo Otubo        <otubo@linux.vnet.ibm.com>
+  Garry Dolley         <gdolley@arpnetworks.com>
+  Harshavardhana       <harsha@gluster.com>
+  Jonas Eriksson       <jonas.j.eriksson@ericsson.com>
+  Jun Koi              <junkoi2004@gmail.com>
+  Olivier Fourdan      <ofourdan@redhat.com>
+  Ron Yorston          <rmy@tigress.co.uk>
+  Shahar Klein         <shaharklein@yahoo.com>
+  Taizo ITO            <taizo.ito@hde.co.jp>
+  Thomas Treutner      <thomas@scripty.at>
+  Jean-Baptiste Rouault <jean-baptiste.rouault@diateam.net>
+  Марк Коренберг       <socketpair@gmail.com>
+  Alan Pevec           <apevec@redhat.com>
+  Aurelien Rougemont   <beorn@binaries.fr>
+  Patrick Dignan       <pat_dignan@dell.com>
+  Serge Hallyn         <serge.hallyn@canonical.com>
+  Nikunj A. Dadhania   <nikunj@linux.vnet.ibm.com>
+  Lai Jiangshan        <laijs@cn.fujitsu.com>
+  Harsh Prateek Bora   <harsh@linux.vnet.ibm.com>
+  John Morrissey       <jwm@horde.net>
+  KAMEZAWA Hiroyuki    <kamezawa.hiroyu@jp.fujitsu.com>
+  Hu Tao               <hutao@cn.fujitsu.com>
+  Laurent Léonard      <laurent@open-minds.org>
+  MORITA Kazutaka      <morita.kazutaka@lab.ntt.co.jp>
+  Josh Durgin          <josh.durgin@dreamhost.com>
+  Roopa Prabhu         <roprabhu@cisco.com>
+  Paweł Krześniak      <pawel.krzesniak@gmail.com>
+  Kay Schubert         <kayegypt@web.de>
+  Marc-André Lureau    <marcandre.lureau@redhat.com>
+  Juerg Haefliger      <juerg.haefliger@hp.com>
+  Matthias Dahl        <mdvirt@designassembly.de>
+  Niels de Vos         <ndevos@redhat.com>
+  Davidlohr Bueso      <dave@gnu.org>
+  Alon Levy            <alevy@redhat.com>
+  Hero Phương          <herophuong93@gmail.com>
+  Zdenek Styblik       <stybla@turnovfree.net>
+  Gui Jianfeng         <guijianfeng@cn.fujitsu.com>
+  Michal Novotny       <minovotn@redhat.com>
+  Markus Groß          <gross@univention.de>
+  Phil Petty           <phpetty@cisco.com>
+  Taku Izumi           <izumi.taku@jp.fujitsu.com>
+  Minoru Usui          <usui@mxm.nes.nec.co.jp>
+  Tiziano Mueller      <dev-zero@gentoo.org>
+  Thibault VINCENT     <thibault.vincent@smartjog.com>
+  Naoya Horiguchi      <n-horiguchi@ah.jp.nec.com>
+  Jesse Cook           <code.crashenx@gmail.com>
+  Alexander Todorov    <atodorov@otb.bg>
+  Richard Laager       <rlaager@wiktel.com>
+  Mark Wu              <dwu@redhat.com>
+  Yufang Zhang         <yuzhang@redhat.com>
+  Supriya Kannery      <supriyak@linux.vnet.ibm.com>
+  Dirk Herrendoerfer   <d.herrendoerfer@herrendoerfer.name>
+  Taisuke Yamada       <tai@rakugaki.org>
+  Heath Petersen       <HeathPetersen@Kandre.com>
+  Neil Wilson          <neil@aldur.co.uk>
+  Ohad Levy            <ohadlevy@gmail.com>
+  Michael Chapman      <mike@very.puzzling.org>
+  Daniel Gollub        <gollub@b1-systems.de>
+  David S. Wang        <dwang2@cisco.com>
+  Ruben Kerkhof        <ruben@rubenkerkhof.com>
+  Scott Moser          <smoser@ubuntu.com>
+  Guannan Ren          <gren@redhat.com>
+  John Williams        <john.williams@petalogix.com>
+  Michael Santos       <michael.santos@gmail.com>
+  Oskari Saarenmaa     <os@ohmu.fi>
+  Nan Zhang            <nzhang@redhat.com>
+  Wieland Hoffmann     <themineo@googlemail.com>
+  Douglas Schilling Landgraf <dougsland@redhat.com>
+  Tom Vijlbrief        <tom.vijlbrief@xs4all.nl>
+  Shradha Shah         <sshah@solarflare.com>
+  Steve Hodgson        <shodgson@solarflare.com>
+  Xu He Jie            <xuhj@linux.vnet.ibm.com>
+  Lei Li               <lilei@linux.vnet.ibm.com>
+  Matthias Witte       <witte@netzquadrat.de>
+  Tang Chen            <tangchen@cn.fujitsu.com>
+  Dan Horák            <dan@danny.cz>
+  Sage Weil            <sage@newdream.net>
+  David L Stevens      <dlstevens@us.ibm.com>
+  Tyler Coumbes        <coumbes@gmail.com>
+  Wen Ruo Lv           <lvroyce@linux.vnet.ibm.com>
+  Patrice LACHANCE     <patlachance@gmail.com>
+  Eli Qiao             <taget@linux.vnet.ibm.com>
+  Michael Wood         <esiotrot@gmail.com>
+  Bharata B Rao        <bharata@linux.vnet.ibm.com>
+  Srivatsa S. Bhat     <srivatsa.bhat@linux.vnet.ibm.com>
+  Chang Liu            <lingjiao.lc@taobao.com>
+  Lorin Hochstein      <lorin@isi.edu>
+  Christian Franke     <nobody@nowhere.ws>
+  Prerna Saxena        <prerna@linux.vnet.ibm.com>
+  Michael Ellerman     <michael@ellerman.id.au>
+  Rommer               <rommer@active.by>
+  Yuri Chornoivan      <yurchor@ukr.net>
+  Deepak C Shetty      <deepakcs@linux.vnet.ibm.com>
+  Martin Kletzander    <mkletzan@redhat.com>
+  Laszlo Ersek         <lersek@redhat.com>
+  Zeeshan Ali (Khattak) <zeeshanak@gnome.org>
+  Marcelo Cerri        <mhcerri@linux.vnet.ibm.com>
+  Hendrik Schwartke    <hendrik@os-t.de>
+  Ansis Atteka         <aatteka@nicira.com>
+  Dan Wendlandt        <dan@nicira.com>
+  Kyle Mestery         <kmestery@cisco.com>
+  Lincoln Myers        <lincoln_myers@yahoo.com>
+  Peter Robinson       <pbrobinson@gmail.com>
+  Benjamin Cama        <benoar@dolka.fr>
+  Duncan Rance         <libvirt@dunquino.com>
+  Peng Zhou            <ailvpeng25@gmail.com>
+  Li Zhang             <zhlcindy@linux.vnet.ibm.com>
+  Stef Walter          <stefw@gnome.org>
+  Christian Benvenuti  <benve@cisco.com>
+  Ilja Livenson        <ilja.livenson@gmail.com>
+  Stefan Bader         <stefan.bader@canonical.com>
+  MATSUDA Daiki        <matsudadik@intellilink.co.jp>
+  Jan Kiszka           <jan.kiszka@siemens.com>
+  Ryan Woodsmall       <rwoodsmall@gmail.com>
+
+  [....send patches to get your name here....]
+
+The libvirt Logo was designed by Diana Fong
+
+-- End
+;; Local Variables:
+;; coding: utf-8
+;; End:
--- a/AUTHORS.in
+++ b/AUTHORS.in
@@ -1,102 +0,0 @@
-   libvirt Authors
-   ===============
-
-The libvirt project was initiated by:
-
-Daniel Veillard <veillard@redhat.com> or <daniel@veillard.com>
-
-The primary maintainers and people with commit access rights:
-
-Alex Jia <ajia@redhat.com>
-Andrea Bolognani <abologna@redhat.com>
-Cédric Bosdonnat <cbosdonnat@suse.com>
-Christian Ehrhardt <christian.ehrhardt@canonical.com>
-Christophe Fergeau <cfergeau@redhat.com>
-Claudio Bley <claudio.bley@gmail.com>
-Cole Robinson <crobinso@redhat.com>
-Daniel P. Berrangé <berrange@redhat.com>
-Daniel Veillard <veillard@redhat.com>
-Doug Goldstein <cardoe@gentoo.org>
-Eric Blake <eblake@redhat.com>
-Erik Skultety <eskultet@redhat.com>
-Fabiano Fidêncio <fidencio@redhat.com>
-Gao Feng <gaofeng@cn.fujitsu.com>
-Guido Günther <agx@sigxcpu.org>
-Ján Tomko <jtomko@redhat.com>
-Jim Fehlig <jfehlig@suse.com>
-Jiří Denemark <jdenemar@redhat.com>
-John Ferlan <jferlan@redhat.com>
-Katerina Koukiou <kkoukiou@redhat.com>
-Laine Stump <laine@redhat.com>
-Mark McLoughlin <markmc@redhat.com>
-Martin Kletzander <mkletzan@redhat.com>
-Matthias Bolte <matthias.bolte@googlemail.com>
-Maxim Nestratov <mnestratov@virtuozzo.com>
-Michal Prívozník <mprivozn@redhat.com>
-Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-Pavel Hrdina <phrdina@redhat.com>
-Peter Krempa <pkrempa@redhat.com>
-Richard W.M. Jones <rjones@redhat.com>
-Roman Bogorodskiy <bogorodskiy@gmail.com>
-Stefan Berger <stefanb@us.ibm.com>
-Wen Congyang <wency@cn.fujitsu.com>
-
-Previous maintainers:
-
-Anthony Liguori <aliguori@us.ibm.com>
-Atsushi SAKAI <sakaia@jp.fujitsu.com>
-Chris Lalancette <clalance@redhat.com>
-Dan Smith <danms@us.ibm.com>
-Dave Allan <dallan@redhat.com>
-Dave Leskovec <dlesko@linux.vnet.ibm.com>
-Dmitry Guryanov <dguryanov@parallels.com>
-Guannan Ren <gren@redhat.com>
-Jim Meyering <meyering@redhat.com>
-John Levon <john.levon@sun.com>
-Justin Clift <jclift@redhat.com>
-Karel Zak <kzak@redhat.com>
-Osier Yang <jyang@redhat.com>
-
-Patches have also been contributed by:
-
-Abel Míguez Rodríguez <amiguezr@pdi.ucm.es>
-Amit Shah <amit.shah@redhat.com>
-Andrew Puch <apuch@redhat.com>
-Anton Protopopov <aspsk2@gmail.com>
-Ben Guthro <ben.guthro@gmail.com>
-Daniel Hokka Zakrisson <daniel@hozac.com>
-Dan Wendlandt <dan@nicira.com>
-David Lively <dlively@virtualiron.com>
-David Lutterkort <dlutter@redhat.com>
-Evgeniy Sokolov <evg@openvz.org>
-Hugh Brock <hbrock@redhat.com>
-Itamar Heim <iheim@redhat.com>
-James Morris <jmorris@namei.org>
-Javier Fontan <jfontan@gmail.com>
-Jeremy Katz <katzj@redhat.com>
-Kaitlin Rupert <kaitlin@linux.vnet.ibm.com>
-Kazuki Mizushima <mizushima.kazuk@jp.fujitsu.com>
-Mads Chr. Olesen <shiyee@shiyee.dk>
-Mark Johnson <johnson.nh@gmail.com>
-Markus Armbruster <armbru@redhat.com>
-Masayuki Sunou <fj1826dm@aa.jp.fujitsu.com>
-Matthias Witte <witte@netzquadrat.de>
-Michel Ponceau <michel.ponceau@bull.net>
-Nobuhiro Itou <fj0873gn@aa.jp.fujitsu.com>
-Pete Vetere <pvetere@redhat.com>
-Philippe Berthault <philippe.berthault@Bull.net>
-Saori Fukuta <fukuta.saori@jp.fujitsu.com>
-Shigeki Sakamoto <fj0588di@aa.jp.fujitsu.com>
-Shuveb Hussain <shuveb@binarykarma.com>
-Stefan de Konink <dekonink@kinkrsoftware.nl>
-Takahashi Tomohiro <takatom@jp.fujitsu.com>
-Tatsuro Enokura <fj7716hz@aa.jp.fujitsu.com>
-
-#contributorslist#
-
-The libvirt logo was designed by Diana Fong
-
-- End
-;; Local Variables:
-;; coding: utf-8
-;; End:
--- a/CONTRIBUTING.rst
+++ b/CONTRIBUTING.rst
@@ -1,46 +0,0 @@
-=======================
-Contributing to libvirt
-=======================
-
-Full, up to date information on how to contribute to libvirt can be
-found on the libvirt website:
-
-https://libvirt.org/contribute.html
-
-To build the same document locally, from the top level directory of
-your git clone run:
-
-::
-
-   $ mkdir build && cd build
-   $ ../autogen.sh
-   $ make
-
-You'll find the freshly-built document in ``docs/contribute.html``.
-
-If ``configure`` fails because of missing dependencies, you can set
-up your system by calling
-
-::
-
-   $ sudo dnf builddep libvirt
-
-if you're on a RHEL-based distribution or
-
-::
-
-   $ sudo apt-get build-dep libvirt
-
-if you're on a Debian-based one.
-
-Note that, for the RHEL-based case, if you're on a machine where you
-haven't done any C development before, you will probably also need
-to run
-
-::
-
-   $ sudo dnf install gcc make libtool autoconf automake rpm-build
-
-You might still be missing some dependencies if your distribution is
-shipping an old libvirt version, but that will get you much closer to
-where you need to be to build successfully from source.
--- a/339
+++ b/339
@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
--- a/COPYING.LESSER
+++ b/COPYING.LESSER
@@ -1,502 +0,0 @@
-                  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-                  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-                            NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
--- a/COPYING.LIB
+++ b/COPYING.LIB
@@ -0,0 +1,508 @@
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations
+below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+^L
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it
+becomes a de-facto standard.  To achieve this, non-free programs must
+be allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+^L
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control
+compilation and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+^L
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+^L
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at least
+    three years, to give the same user the materials specified in
+    Subsection 6a, above, for a charge no more than the cost of
+    performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+^L
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+^L
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply, and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License
+may add an explicit geographical distribution limitation excluding those
+countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+^L
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+^L
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms
+of the ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.
+It is safest to attach them to the start of each source file to most
+effectively convey the exclusion of warranty; and each file should
+have at least the "copyright" line and a pointer to where the full
+notice is found.
+
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or
+your school, if any, to sign a "copyright disclaimer" for the library,
+if necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James
+  Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
--- a/15
+++ b/15
@@ -1,15 +0,0 @@
-libvirt ChangeLog
-=================
-
-The libvirt project doesn't include a detailed ChangeLog in its release
-archives.
-
-If you're interested in the full list of changes made to libvirt since
-the project was started, you can clone the git repository from
-
-  https://libvirt.org/git/libvirt.git
-
-and browse them locally using your favorite git history viewer or,
-alternatively, browse them online at
-
-  https://libvirt.org/git/?p=libvirt.git;a=log
--- a/16699
+++ b/16699
--- a/74
+++ b/74
@@ -1,74 +0,0 @@
-# Having a separate GNUmakefile lets me 'include' the dynamically
-# generated rules created via cfg.mk (package-local configuration)
-# as well as maint.mk (generic maintainer rules).
-# This makefile is used only if you run GNU Make.
-# It is necessary if you want to build targets usually of interest
-# only to the maintainer.
-
-# Copyright (C) 2001, 2003, 2006-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-_build-aux ?= build-aux
-_autoreconf ?= autoreconf -v
-
-# If the user runs GNU make but has not yet run ./configure,
-# give them a diagnostic.
-_gl-Makefile := $(wildcard [M]akefile)
-ifneq ($(_gl-Makefile),)
-
-# Make tar archive easier to reproduce.
-export TAR_OPTIONS = --owner=0 --group=0 --numeric-owner
-
-# Allow the user to add to this in the Makefile.
-ALL_RECURSIVE_TARGETS =
-
-include Makefile
-include $(srcdir)/$(_build-aux)/syntax-check.mk
-
-else
-
-.DEFAULT_GOAL := abort-due-to-no-makefile
-srcdir = .
-
-# The package can override .DEFAULT_GOAL to run actions like autoreconf.
-include $(srcdir)/$(_build-aux)/syntax-check.mk
-
-ifeq ($(.DEFAULT_GOAL),abort-due-to-no-makefile)
-$(MAKECMDGOALS): abort-due-to-no-makefile
-endif
-
-abort-due-to-no-makefile:
-	@echo There seems to be no Makefile in this directory.   1>&2
-	@echo "You must run ./configure before running 'make'." 1>&2
-	@exit 1
-
-endif
-
-# Tell version 3.79 and up of GNU make to not build goals in this
-# directory in parallel, in case someone tries to build multiple
-# targets, and one of them can cause a recursive target to be invoked.
-
-# Only set this if Automake doesn't provide it.
-AM_RECURSIVE_TARGETS ?= $(RECURSIVE_TARGETS:-recursive=) \
-  $(RECURSIVE_CLEAN_TARGETS:-recursive=) \
-  dist distcheck tags ctags
-
-ALL_RECURSIVE_TARGETS += $(AM_RECURSIVE_TARGETS)
-
-ifneq ($(word 2, $(MAKECMDGOALS)), )
-ifneq ($(filter $(ALL_RECURSIVE_TARGETS), $(MAKECMDGOALS)), )
-.NOTPARALLEL:
-endif
-endif
--- a/714
+++ b/714
@@ -0,0 +1,714 @@
+-*- buffer-read-only: t -*- vi: set ro:
+DO NOT EDIT THIS FILE!  IT IS GENERATED AUTOMATICALLY!
+
+
+
+                         Contributor guidelines
+                         ======================
+
+
+
+General tips for contributing patches
+=====================================
+(1) Discuss any large changes on the mailing list first. Post patches early and
+listen to feedback.
+
+(2) Post patches in unified diff format. A command similar to this should work:
+
+  diff -urp libvirt.orig/ libvirt.modified/ > libvirt-myfeature.patch
+
+or:
+
+  git diff > libvirt-myfeature.patch
+
+(3) Split large changes into a series of smaller patches, self-contained if
+possible, with an explanation of each patch and an explanation of how the
+sequence of patches fits together.
+
+(4) Make sure your patches apply against libvirt GIT. Developers only follow GIT
+and don't care much about released versions.
+
+(5) Run the automated tests on your code before submitting any changes. In
+particular, configure with compile warnings set to -Werror:
+
+  ./configure --enable-compile-warnings=error
+
+and run the tests:
+
+  make check
+  make syntax-check
+  make -C tests valgrind
+
+The latter test checks for memory leaks.
+
+If you encounter any failing tests, the VIR_TEST_DEBUG environment variable
+may provide extra information to debug the failures. Larger values of
+VIR_TEST_DEBUG may provide larger amounts of information:
+
+  VIR_TEST_DEBUG=1 make check    (or)
+  VIR_TEST_DEBUG=2 make check
+
+Also, individual tests can be run from inside the "tests/" directory, like:
+
+  ./qemuxml2xmltest
+
+(6) Update tests and/or documentation, particularly if you are adding a new
+feature or changing the output of a program.
+
+
+
+There is more on this subject, including lots of links to background reading
+on the subject, on
+
+  Richard Jones' guide to working with open source projects
+  http://et.redhat.com/~rjones/how-to-supply-code-to-open-source-projects/
+
+
+Code indentation
+================
+Libvirt's C source code generally adheres to some basic code-formatting
+conventions. The existing code base is not totally consistent on this front,
+but we do prefer that contributed code be formatted similarly. In short, use
+spaces-not-TABs for indentation, use 4 spaces for each indentation level, and
+other than that, follow the K&R style.
+
+If you use Emacs, add the following to one of one of your start-up files
+(e.g., ~/.emacs), to help ensure that you get indentation right:
+
+  ;;; When editing C sources in libvirt, use this style.
+  (defun libvirt-c-mode ()
+    "C mode with adjusted defaults for use with libvirt."
+    (interactive)
+    (c-set-style "K&R")
+    (setq indent-tabs-mode nil) ; indent using spaces, not TABs
+    (setq c-indent-level 4)
+    (setq c-basic-offset 4))
+  (add-hook 'c-mode-hook
+            '(lambda () (if (string-match "/libvirt" (buffer-file-name))
+                            (libvirt-c-mode))))
+
+If you use vim, append the following to your ~/.vimrc file:
+
+  set nocompatible
+  filetype on
+  set autoindent
+  set smartindent
+  set cindent
+  set tabstop=8
+  set shiftwidth=4
+  set expandtab
+  set cinoptions=(0,:0,l1,t0
+  filetype plugin indent on
+  au FileType make setlocal noexpandtab
+  au BufRead,BufNewFile *.am setlocal noexpandtab
+  match ErrorMsg /\s\+$\| \+\ze\t/
+
+Or if you don't want to mess your ~/.vimrc up, you can save the above into a
+file called .lvimrc (not .vimrc) located at the root of libvirt source, then
+install a vim script from
+http://www.vim.org/scripts/script.php?script_id=1408, which will load the
+.lvimrc only when you edit libvirt code.
+
+
+Code formatting (especially for new code)
+=========================================
+With new code, we can be even more strict. Please apply the following function
+(using GNU indent) to any new code. Note that this also gives you an idea of
+the type of spacing we prefer around operators and keywords:
+
+  indent-libvirt()
+  {
+    indent -bad -bap -bbb -bli4 -br -ce -brs -cs -i4 -l75 -lc75 \
+      -sbi4 -psl -saf -sai -saw -sbi4 -ss -sc -cdw -cli4 -npcs -nbc \
+      --no-tabs "$@"
+  }
+
+Note that sometimes you'll have to post-process that output further, by piping
+it through "expand -i", since some leading TABs can get through. Usually
+they're in macro definitions or strings, and should be converted anyhow.
+
+Libvirt requires a C99 compiler for various reasons. However, most of the code
+base prefers to stick to C89 syntax unless there is a compelling reason
+otherwise. For example, it is preferable to use "/* */" comments rather than
+"//". Also, when declaring local variables, the prevailing style has been to
+declare them at the beginning of a scope, rather than immediately before use.
+
+
+Curly braces
+============
+Omit the curly braces around an "if", "while", "for" etc. body only when that
+body occupies a single line. In every other case we require the braces. This
+ensures that it is trivially easy to identify a single-'statement' loop: each
+has only one 'line' in its body.
+
+Omitting braces with a single-line body is fine:
+
+  while (expr) // one-line body -> omitting curly braces is ok
+      single_line_stmt();
+
+However, the moment your loop/if/else body extends onto a second line, for
+whatever reason (even if it's just an added comment), then you should add
+braces. Otherwise, it would be too easy to insert a statement just before that
+comment (without adding braces), thinking it is already a multi-statement loop:
+
+  while (true) // BAD! multi-line body with no braces
+      /* comment... */
+      single_line_stmt();
+
+Do this instead:
+
+  while (true) { // Always put braces around a multi-line body.
+      /* comment... */
+      single_line_stmt();
+  }
+
+There is one exception: when the second body line is not at the same
+indentation level as the first body line:
+
+  if (expr)
+      die("a diagnostic that would make this line"
+          " extend past the 80-column limit"));
+
+It is safe to omit the braces in the code above, since the further-indented
+second body line makes it obvious that this is still a single-statement body.
+
+To reiterate, don't do this:
+
+  if (expr)            // BAD: no braces around...
+      while (expr_2) { // ... a multi-line body
+          ...
+      }
+
+Do this, instead:
+
+  if (expr) {
+      while (expr_2) {
+          ...
+      }
+  }
+
+However, there is one exception in the other direction, when even a one-line
+block should have braces. That occurs when that one-line, brace-less block is
+an "if" or "else" block, and the counterpart block *does* use braces. In that
+case, put braces around both blocks. Also, if the "else" block is much shorter
+than the "if" block, consider negating the "if"-condition and swapping the
+bodies, putting the short block first and making the longer, multi-line block
+be the "else" block.
+
+  if (expr) {
+      ...
+      ...
+  }
+  else
+      x = y;    // BAD: braceless "else" with braced "then",
+                // and short block last
+
+  if (expr)
+      x = y;    // BAD: braceless "if" with braced "else"
+  else {
+      ...
+      ...
+  }
+
+Keeping braces consistent and putting the short block first is preferred,
+especially when the multi-line body is more than a few lines long, because it
+is easier to read and grasp the semantics of an if-then-else block when the
+simpler block occurs first, rather than after the more involved block:
+
+  if (!expr) {
+    x = y; // putting the smaller block first is more readable
+  } else {
+      ...
+      ...
+  }
+
+But if negating a complex condition is too ugly, then at least add braces:
+
+  if (complex expr not worth negating) {
+      ...
+      ...
+  } else {
+      x = y;
+  }
+
+
+Preprocessor
+============
+For variadic macros, stick with C99 syntax:
+
+  #define vshPrint(_ctl, ...) fprintf(stdout, __VA_ARGS__)
+
+Use parenthesis when checking if a macro is defined, and use indentation to
+track nesting:
+
+  #if defined(HAVE_POSIX_FALLOCATE) && !defined(HAVE_FALLOCATE)
+  # define fallocate(a,ignored,b,c) posix_fallocate(a,b,c)
+  #endif
+
+
+C types
+=======
+Use the right type.
+
+Scalars
+-------
+- If you're using "int" or "long", odds are good that there's a better type.
+
+- If a variable is counting something, be sure to declare it with an unsigned
+type.
+
+- If it's memory-size-related, use "size_t" (use "ssize_t" only if required).
+
+- If it's file-size related, use uintmax_t, or maybe "off_t".
+
+- If it's file-offset related (i.e., signed), use "off_t".
+
+- If it's just counting small numbers use "unsigned int"; (on all but oddball
+embedded systems, you can assume that that type is at least four bytes wide).
+
+- If a variable has boolean semantics, give it the "bool" type and use the
+corresponding "true" and "false" macros. It's ok to include <stdbool.h>, since
+libvirt's use of gnulib ensures that it exists and is usable.
+
+- In the unusual event that you require a specific width, use a standard type
+like "int32_t", "uint32_t", "uint64_t", etc.
+
+- While using "bool" is good for readability, it comes with minor caveats:
+
+-- Don't use "bool" in places where the type size must be constant across all
+systems, like public interfaces and on-the-wire protocols. Note that it would
+be possible (albeit wasteful) to use "bool" in libvirt's logical wire
+protocol, since XDR maps that to its lower-level "bool_t" type, which *is*
+fixed-size.
+
+-- Don't compare a bool variable against the literal, "true", since a value with
+a logical non-false value need not be "1". I.e., don't write "if (seen ==
+true) ...". Rather, write "if (seen)...".
+
+
+
+
+
+Of course, take all of the above with a grain of salt. If you're about to use
+some system interface that requires a type like "size_t", "pid_t" or "off_t",
+use matching types for any corresponding variables.
+
+Also, if you try to use e.g., "unsigned int" as a type, and that conflicts
+with the signedness of a related variable, sometimes it's best just to use the
+*wrong* type, if 'pulling the thread' and fixing all related variables would
+be too invasive.
+
+Finally, while using descriptive types is important, be careful not to go
+overboard. If whatever you're doing causes warnings, or requires casts, then
+reconsider or ask for help.
+
+Pointers
+--------
+Ensure that all of your pointers are 'const-correct'. Unless a pointer is used
+to modify the pointed-to storage, give it the "const" attribute. That way, the
+reader knows up-front that this is a read-only pointer. Perhaps more
+importantly, if we're diligent about this, when you see a non-const pointer,
+you're guaranteed that it is used to modify the storage it points to, or it is
+aliased to another pointer that is.
+
+
+Low level memory management
+===========================
+Use of the malloc/free/realloc/calloc APIs is deprecated in the libvirt
+codebase, because they encourage a number of serious coding bugs and do not
+enable compile time verification of checks for NULL. Instead of these
+routines, use the macros from memory.h.
+
+- To allocate a single object:
+
+  virDomainPtr domain;
+
+  if (VIR_ALLOC(domain) < 0) {
+      virReportOOMError();
+      return NULL;
+  }
+
+
+
+- To allocate an array of objects:
+
+  virDomainPtr domains;
+  size_t ndomains = 10;
+
+  if (VIR_ALLOC_N(domains, ndomains) < 0) {
+      virReportOOMError();
+      return NULL;
+  }
+
+
+
+- To allocate an array of object pointers:
+
+  virDomainPtr *domains;
+  size_t ndomains = 10;
+
+  if (VIR_ALLOC_N(domains, ndomains) < 0) {
+      virReportOOMError();
+      return NULL;
+  }
+
+
+
+- To re-allocate the array of domains to be 1 element longer (however, note that
+repeatedly expanding an array by 1 scales quadratically, so this is
+recommended only for smaller arrays):
+
+  virDomainPtr domains;
+  size_t ndomains = 0;
+
+  if (VIR_EXPAND_N(domains, ndomains, 1) < 0) {
+      virReportOOMError();
+      return NULL;
+  }
+  domains[ndomains - 1] = domain;
+
+
+
+- To ensure an array has room to hold at least one more element (this approach
+scales better, but requires tracking allocation separately from usage)
+
+  virDomainPtr domains;
+  size_t ndomains = 0;
+  size_t ndomains_max = 0;
+
+  if (VIR_RESIZE_N(domains, ndomains_max, ndomains, 1) < 0) {
+      virReportOOMError();
+      return NULL;
+  }
+  domains[ndomains++] = domain;
+
+
+
+- To trim an array of domains from its allocated size down to the actual used
+size:
+
+  virDomainPtr domains;
+  size_t ndomains = x;
+  size_t ndomains_max = y;
+
+  VIR_SHRINK_N(domains, ndomains_max, ndomains_max - ndomains);
+
+
+
+- To free an array of domains:
+
+  virDomainPtr domains;
+  size_t ndomains = x;
+  size_t ndomains_max = y;
+  size_t i;
+
+  for (i = 0; i < ndomains; i++)
+      VIR_FREE(domains[i]);
+  VIR_FREE(domains);
+  ndomains_max = ndomains = 0;
+
+
+
+
+
+
+File handling
+=============
+Usage of the "fdopen()", "close()", "fclose()" APIs is deprecated in libvirt
+code base to help avoiding double-closing of files or file descriptors, which
+is particulary dangerous in a multi-threaded applications. Instead of these
+APIs, use the macros from virfile.h
+
+- Open a file from a file descriptor:
+
+  if ((file = VIR_FDOPEN(fd, "r")) == NULL) {
+      virReportSystemError(errno, "%s",
+                           _("failed to open file from file descriptor"));
+      return -1;
+  }
+  /* fd is now invalid; only access the file using file variable */
+
+
+
+- Close a file descriptor:
+
+  if (VIR_CLOSE(fd) < 0) {
+      virReportSystemError(errno, "%s", _("failed to close file"));
+  }
+
+
+
+- Close a file:
+
+  if (VIR_FCLOSE(file) < 0) {
+      virReportSystemError(errno, "%s", _("failed to close file"));
+  }
+
+
+
+- Close a file or file descriptor in an error path, without losing the previous
+"errno" value:
+
+  VIR_FORCE_CLOSE(fd);
+  VIR_FORCE_FCLOSE(file);
+
+
+
+
+
+
+String comparisons
+==================
+Do not use the strcmp, strncmp, etc functions directly. Instead use one of the
+following semantically named macros
+
+- For strict equality:
+
+  STREQ(a,b)
+  STRNEQ(a,b)
+
+
+
+- For case insensitive equality:
+
+  STRCASEEQ(a,b)
+  STRCASENEQ(a,b)
+
+
+
+- For strict equality of a substring:
+
+  STREQLEN(a,b,n)
+  STRNEQLEN(a,b,n)
+
+
+
+- For case insensitive equality of a substring:
+
+  STRCASEEQLEN(a,b,n)
+  STRCASENEQLEN(a,b,n)
+
+
+
+- For strict equality of a prefix:
+
+  STRPREFIX(a,b)
+
+
+
+- To avoid having to check if a or b are NULL:
+
+  STREQ_NULLABLE(a, b)
+  STRNEQ_NULLABLE(a, b)
+
+
+
+
+
+
+String copying
+==============
+Do not use the strncpy function. According to the man page, it does *not*
+guarantee a NULL-terminated buffer, which makes it extremely dangerous to use.
+Instead, use one of the functionally equivalent functions:
+
+  virStrncpy(char *dest, const char *src, size_t n, size_t destbytes)
+
+The first three arguments have the same meaning as for strncpy; namely the
+destination, source, and number of bytes to copy, respectively. The last
+argument is the number of bytes available in the destination string; if a copy
+of the source string (including a \0) will not fit into the destination, no
+bytes are copied and the routine returns NULL. Otherwise, n bytes from the
+source are copied into the destination and a trailing \0 is appended.
+
+  virStrcpy(char *dest, const char *src, size_t destbytes)
+
+Use this variant if you know you want to copy the entire src string into dest.
+Note that this is a macro, so arguments could be evaluated more than once.
+This is equivalent to virStrncpy(dest, src, strlen(src), destbytes)
+
+  virStrcpyStatic(char *dest, const char *src)
+
+Use this variant if you know you want to copy the entire src string into dest
+*and* you know that your destination string is a static string (i.e. that
+sizeof(dest) returns something meaningful). Note that this is a macro, so
+arguments could be evaluated more than once. This is equivalent to
+virStrncpy(dest, src, strlen(src), sizeof(dest)).
+
+
+Variable length string buffer
+=============================
+If there is a need for complex string concatenations, avoid using the usual
+sequence of malloc/strcpy/strcat/snprintf functions and make use of the
+virBuffer API described in buf.h
+
+Typical usage is as follows:
+
+  char *
+  somefunction(...)
+  {
+     virBuffer buf = VIR_BUFFER_INITIALIZER;
+
+     ...
+
+     virBufferAddLit(&buf, "<domain>\n");
+     virBufferAsprintf(&buf, "  <memory>%d</memory>\n", memory);
+     ...
+     virBufferAddLit(&buf, "</domain>\n");
+
+     ...
+
+     if (virBufferError(&buf)) {
+         virBufferFreeAndReset(&buf);
+         virReportOOMError();
+         return NULL;
+     }
+
+     return virBufferContentAndReset(&buf);
+  }
+
+
+Include files
+=============
+There are now quite a large number of include files, both libvirt internal and
+external, and system includes. To manage all this complexity it's best to
+stick to the following general plan for all *.c source files:
+
+  /*
+   * Copyright notice
+   * ....
+   * ....
+   * ....
+   *
+   */
+
+  #include <config.h>             Must come first in every file.
+
+  #include <stdio.h>              Any system includes you need.
+  #include <string.h>
+  #include <limits.h>
+
+  #if HAVE_NUMACTL                Some system includes aren't supported
+  # include <numa.h>              everywhere so need these #if guards.
+  #endif
+
+  #include "internal.h"           Include this first, after system includes.
+
+  #include "util.h"               Any libvirt internal header files.
+  #include "buf.h"
+
+  static int
+  myInternalFunc()                The actual code.
+  {
+      ...
+
+Of particular note: *Do not* include libvirt/libvirt.h or libvirt/virterror.h.
+It is included by "internal.h" already and there are some special reasons why
+you cannot include these files explicitly.
+
+
+Printf-style functions
+======================
+Whenever you add a new printf-style function, i.e., one with a format string
+argument and following "..." in its prototype, be sure to use gcc's printf
+attribute directive in the prototype. For example, here's the one for
+virAsprintf, in util.h:
+
+  int virAsprintf(char **strp, const char *fmt, ...)
+      ATTRIBUTE_FORMAT(printf, 2, 3);
+
+This makes it so gcc's -Wformat and -Wformat-security options can do their
+jobs and cross-check format strings with the number and types of arguments.
+
+When printing to a string, consider using virBuffer for incremental
+allocations, virAsprintf for a one-shot allocation, and snprintf for
+fixed-width buffers. Do not use sprintf, even if you can prove the buffer
+won't overflow, since gnulib does not provide the same portability guarantees
+for sprintf as it does for snprintf.
+
+
+Use of goto
+===========
+The use of goto is not forbidden, and goto is widely used throughout libvirt.
+While the uncontrolled use of goto will quickly lead to unmaintainable code,
+there is a place for it in well structured code where its use increases
+readability and maintainability. In general, if goto is used for error
+recovery, it's likely to be ok, otherwise, be cautious or avoid it all
+together.
+
+The typical use of goto is to jump to cleanup code in the case of a long list
+of actions, any of which may fail and cause the entire operation to fail. In
+this case, a function will have a single label at the end of the function.
+It's almost always ok to use this style. In particular, if the cleanup code
+only involves free'ing memory, then having multiple labels is overkill.
+VIR_FREE() and every function named XXXFree() in libvirt is required to handle
+NULL as its arg. Thus you can safely call free on all the variables even if
+they were not yet allocated (yes they have to have been initialized to NULL).
+This is much simpler and clearer than having multiple labels.
+
+There are a couple of signs that a particular use of goto is not ok:
+
+- You're using multiple labels. If you find yourself using multiple labels,
+you're strongly encouraged to rework your code to eliminate all but one of
+them.
+
+- The goto jumps back up to a point above the current line of code being
+executed. Please use some combination of looping constructs to re-execute code
+instead; it's almost certainly going to be more understandable by others. One
+well-known exception to this rule is restarting an i/o operation following
+EINTR.
+
+- The goto jumps down to an arbitrary place in the middle of a function followed
+by further potentially failing calls. You should almost certainly be using a
+conditional and a block instead of a goto. Perhaps some of your function's
+logic would be better pulled out into a helper function.
+
+
+
+Although libvirt does not encourage the Linux kernel wind/unwind style of
+multiple labels, there's a good general discussion of the issue archived at
+
+  KernelTrap
+  http://kerneltrap.org/node/553/2131
+
+When using goto, please use one of these standard labels if it makes sense:
+
+      error: A path only taken upon return with an error code
+    cleanup: A path taken upon return with success code + optional error
+  no_memory: A path only taken upon return with an OOM error code
+      retry: If needing to jump upwards (e.g., retry on EINTR)
+
+
+Libvirt committer guidelines
+============================
+The AUTHORS files indicates the list of people with commit access right who
+can actually merge the patches.
+
+The general rule for committing a patch is to make sure it has been reviewed
+properly in the mailing-list first, usually if a couple of people gave an ACK
+or +1 to a patch and nobody raised an objection on the list it should be good
+to go. If the patch touches a part of the code where you're not the main
+maintainer, or where you do not have a very clear idea of how things work,
+it's better to wait for a more authoritative feedback though. Before
+committing, please also rebuild locally, run 'make check syntax-check', and
+make sure you don't raise errors. Try to look for warnings too; for example,
+configure with
+
+  --enable-compile-warnings=error
+
+which adds -Werror to compile flags, so no warnings get missed
+
+An exception to 'review and approval on the list first' is fixing failures to
+build:
+
+- if a recently committed patch breaks compilation on a platform or for a given
+driver, then it's fine to commit a minimal fix directly without getting the
+review feedback first
+
+- if make check or make syntax-check breaks, if there is an obvious fix, it's
+fine to commit immediately. The patch should still be sent to the list (or
+tell what the fix was if trivial), and 'make check syntax-check' should pass
+too, before committing anything
+
+- fixes for documentation and code comments can be managed in the same way, but
+still make sure they get reviewed if non-trivial.
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,123 +1,67 @@
 ## Process this file with automake to produce Makefile.in

-## Copyright (C) 2005-2013 Red Hat, Inc.
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library.  If not, see
-## <http://www.gnu.org/licenses/>.
+## Copyright (C) 2005-2011 Red Hat, Inc.
+## See COPYING.LIB for the License of this software

 LCOV = lcov
 GENHTML = genhtml

-# when building from tarball -Werror isn't auto enabled
-# so force it explicitly
-DISTCHECK_CONFIGURE_FLAGS = --enable-werror
+SUBDIRS = gnulib/lib include src daemon tools docs gnulib/tests \
+  python tests po examples/domain-events/events-c examples/hellolibvirt \
+  examples/dominfo examples/domsuspend examples/python examples/apparmor \
+  examples/xml/nwfilter examples/openauth examples/systemtap

-SUBDIRS = . include/libvirt src tools docs \
-  tests po examples
+ACLOCAL_AMFLAGS = -I m4 -I gnulib/m4

-XZ_OPT ?= -v -T0
-export XZ_OPT
-
-ACLOCAL_AMFLAGS = -I m4
+XML_EXAMPLES = \
+  $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/examples/xml/, \
+					test/*.xml storage/*.xml)))

 EXTRA_DIST = \
-  config-post.h \
+  ChangeLog-old \
  libvirt.spec libvirt.spec.in \
-  mingw-libvirt.spec.in \
+  mingw32-libvirt.spec.in \
  libvirt.pc.in \
-  libvirt-qemu.pc.in \
-  libvirt-lxc.pc.in \
-  libvirt-admin.pc.in \
+  autobuild.sh \
  Makefile.nonreentrant \
  autogen.sh \
-  GNUmakefile \
-  run.in \
-  README.rst \
-  AUTHORS.in \
-  CONTRIBUTING.rst \
-  scripts/apibuild.py \
-  scripts/augeas-gentest.py \
-  build-aux/check-spacing.pl \
-  scripts/check-aclperms.py \
-  scripts/check-aclrules.py \
-  scripts/check-drivername.py \
-  scripts/check-driverimpls.py \
-  scripts/check-file-access.py \
-  scripts/check-remote-protocol.py \
-  scripts/check-symfile.py \
-  scripts/check-symsorting.py \
-  scripts/dtrace2systemtap.py \
-  scripts/esx_vi_generator.py \
-  scripts/genaclperms.py \
-  scripts/genpolkit.py \
-  scripts/gensystemtap.py \
-  scripts/group-qemu-caps.py \
-  scripts/header-ifdef.py \
-  scripts/hvsupport.py \
-  scripts/hyperv_wmi_generator.py \
-  scripts/minimize-po.py \
-  scripts/mock-noinline.py \
-  scripts/prohibit-duplicate-header.py \
-  scripts/reformat-news.py \
-  scripts/test-wrap-argv.py \
-  build-aux/syntax-check.mk \
-  build-aux/useless-if-before-free \
-  build-aux/vc-list-files \
-  ci/Makefile \
-  ci/build.sh \
-  ci/list-images.sh \
-  ci/prepare.sh \
-  $(NULL)
+  cfg.mk \
+  examples/domain-events/events-python \
+  $(XML_EXAMPLES)

 pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libvirt.pc libvirt-qemu.pc libvirt-lxc.pc libvirt-admin.pc
+pkgconfig_DATA = libvirt.pc

-NEWS: \
-	  $(srcdir)/docs/news.xml \
-	  $(srcdir)/docs/news-ascii.xsl \
-	  $(top_srcdir)/scripts/reformat-news.py
-	$(AM_V_GEN) \
-	if [ -x $(XSLTPROC) ]; then \
-	  $(XSLTPROC) --nonet \
-	    $(srcdir)/docs/news-ascii.xsl \
-	    $(srcdir)/docs/news.xml \
-	  >$@-tmp \
-	    || { rm -f $@-tmp; exit 1; }; \
-	  $(RUNUTF8) $(PYTHON) $(top_srcdir)/scripts/reformat-news.py $@-tmp >$@ \
-	    || { rm -f $@-tmp; exit 1; }; \
-	  rm -f $@-tmp; \
-	fi
-EXTRA_DIST += \
-	$(srcdir)/docs/news.xml \
-	$(srcdir)/docs/news-ascii.xsl \
-	$(NULL)
+NEWS: $(top_srcdir)/docs/news.xsl $(top_srcdir)/docs/news.html.in
+	-@(if [ -x $(XSLTPROC) ] ; then				\
+	  $(XSLTPROC) --nonet $(top_srcdir)/docs/news.xsl	\
+	     $(top_srcdir)/docs/news.html.in			\
+	   | perl -0777 -pe 's/\n\n+$$/\n/'			\
+	   | perl -pe 's/[ \t]+$$//'				\
+	   > $@-t && mv $@-t $@ ; fi );
+
+$(top_srcdir)/HACKING: $(top_srcdir)/docs/hacking1.xsl $(top_srcdir)/docs/hacking2.xsl \
+                       $(top_srcdir)/docs/wrapstring.xsl $(top_srcdir)/docs/hacking.html.in
+	-@(if [ -x $(XSLTPROC) ] ; then \
+	   $(XSLTPROC) --nonet $(top_srcdir)/docs/hacking1.xsl $(top_srcdir)/docs/hacking.html.in | \
+	   $(XSLTPROC) --nonet $(top_srcdir)/docs/hacking2.xsl - \
+	   | perl -0777 -pe 's/\n\n+$$/\n/' \
+	   > $@-t && mv $@-t $@ ; fi );

 rpm: clean
-	@(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.xz)
-
-srpm: clean
-	@(unset CDPATH ; $(MAKE) dist && rpmbuild -ts $(distdir).tar.xz)
+	@(unset CDPATH ; $(MAKE) dist && rpmbuild -ta $(distdir).tar.gz)

 check-local: all tests

-check-access: all
-	@($(MAKE) $(AM_MAKEFLAGS) -C tests check-access)
+tests:
+	@(cd docs/examples ; $(MAKE) MAKEFLAGS+=--silent tests)
+	@(if [ "$(pythondir)" != "" ] ; then cd python ; \
+	  $(MAKE) MAKEFLAGS+=--silent tests ; fi)

 cov: clean-cov
-	$(MKDIR_P) $(top_builddir)/coverage
+	mkdir $(top_builddir)/coverage
 	$(LCOV) -c -o $(top_builddir)/coverage/libvirt.info.tmp \
-	  -d $(top_builddir)/src \
+	  -d $(top_builddir)/src  -d $(top_builddir)/daemon \
 	  -d $(top_builddir)/tests
 	$(LCOV) -r $(top_builddir)/coverage/libvirt.info.tmp \
 	  -o $(top_builddir)/coverage/libvirt.info
@@ -130,72 +74,19 @@ clean-cov:

 MAINTAINERCLEANFILES = .git-module-status

-BUILT_SOURCES = configmake.h
-CLEANFILES = configmake.h
+# disable this check
+distuninstallcheck:

-distclean-local: clean-GNUmakefile
-clean-GNUmakefile:
-	test '$(srcdir)' = . || rm -f $(top_builddir)/GNUmakefile
+dist-hook: gen-ChangeLog

-dist-hook: gen-AUTHORS
-
-.PHONY: gen-AUTHORS
-gen-AUTHORS:
-	$(AM_V_GEN)\
-	if test -d $(srcdir)/.git; then \
-	  ( \
-	    cd $(srcdir) && \
-	    git log --pretty=format:'%aN <%aE>' | sort -u \
-	  ) > all.list && \
-	  sort -u $(srcdir)/AUTHORS.in > maint.list && \
-	  comm -23 all.list maint.list > contrib.list && \
-	  contrib="`cat contrib.list`" && \
-	  perl -p -e "s/#contributorslist#// and print '$$contrib'" \
-	    < $(srcdir)/AUTHORS.in > $(distdir)/AUTHORS-tmp && \
-	  mv -f $(distdir)/AUTHORS-tmp $(distdir)/AUTHORS && \
-	  rm -f all.list maint.list contrib.list; \
+# Generate the ChangeLog file (with all entries since the switch to git)
+# and insert it into the directory we're about to use to create a tarball.
+gen_start_date = 2009-07-04
+.PHONY: gen-ChangeLog
+gen-ChangeLog:
+	if test -d .git; then					\
+	  $(top_srcdir)/build-aux/gitlog-to-changelog		\
+	    --since=$(gen_start_date) > $(distdir)/cl-t;	\
+	  rm -f $(distdir)/ChangeLog;				\
+	  mv $(distdir)/cl-t $(distdir)/ChangeLog;		\
 	fi
-
-ci-%:
-	$(MAKE) -C $(srcdir)/ci/ $@
-
-# Listed in the same order as the GNU makefile conventions, and
-# provided by autoconf 2.59c+ or 2.70.
-# The Automake-defined pkg* macros are appended, in the order
-# listed in the Automake 1.10a+ documentation.
-configmake.h: Makefile
-	$(AM_V_GEN)rm -f $@-t && \
-	{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
-	  echo '#if WIN32'; \
-	  echo '# include <winsock2.h> /* avoid mingw pollution on DATADIR */'; \
-	  echo '#endif'; \
-	  echo '#define PREFIX "$(prefix)"'; \
-	  echo '#define EXEC_PREFIX "$(exec_prefix)"'; \
-	  echo '#define BINDIR "$(bindir)"'; \
-	  echo '#define SBINDIR "$(sbindir)"'; \
-	  echo '#define LIBEXECDIR "$(libexecdir)"'; \
-	  echo '#define DATAROOTDIR "$(datarootdir)"'; \
-	  echo '#define DATADIR "$(datadir)"'; \
-	  echo '#define SYSCONFDIR "$(sysconfdir)"'; \
-	  echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \
-	  echo '#define LOCALSTATEDIR "$(localstatedir)"'; \
-	  echo '#define RUNSTATEDIR "$(runstatedir)"'; \
-	  echo '#define INCLUDEDIR "$(includedir)"'; \
-	  echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \
-	  echo '#define DOCDIR "$(docdir)"'; \
-	  echo '#define INFODIR "$(infodir)"'; \
-	  echo '#define HTMLDIR "$(htmldir)"'; \
-	  echo '#define DVIDIR "$(dvidir)"'; \
-	  echo '#define PDFDIR "$(pdfdir)"'; \
-	  echo '#define PSDIR "$(psdir)"'; \
-	  echo '#define LIBDIR "$(libdir)"'; \
-	  echo '#define LISPDIR "$(lispdir)"'; \
-	  echo '#define LOCALEDIR "$(localedir)"'; \
-	  echo '#define MANDIR "$(mandir)"'; \
-	  echo '#define MANEXT "$(manext)"'; \
-	  echo '#define PKGDATADIR "$(pkgdatadir)"'; \
-	  echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \
-	  echo '#define PKGLIBDIR "$(pkglibdir)"'; \
-	  echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \
-	} | sed '/""/d' > $@-t && \
-	mv -f $@-t $@
--- a/Makefile.nonreentrant
+++ b/Makefile.nonreentrant
@@ -1,23 +1,8 @@
-## Copyright (C) 2009-2010, 2013 Red Hat, Inc.
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library.  If not, see
-## <http://www.gnu.org/licenses/>.

 #
-# Generated by running the following on Fedora 26:
+# Generated by running the following on Fedora 9:
 #
-#  nm -D --defined-only /lib64/libc.so.6 \
+#  nm -D --defined-only /lib/libc.so.6  \
 #      | grep '_r$' \
 #      | awk '{print $3}' \
 #      | grep -v __ \
@@ -43,7 +28,6 @@ NON_REENTRANT += ether_ntoa
 NON_REENTRANT += fcvt
 NON_REENTRANT += fgetgrent
 NON_REENTRANT += fgetpwent
-NON_REENTRANT += fgetsgent
 NON_REENTRANT += fgetspent
 NON_REENTRANT += getaliasbyname
 NON_REENTRANT += getaliasent
@@ -73,8 +57,6 @@ NON_REENTRANT += getrpcent
 NON_REENTRANT += getservbyname
 NON_REENTRANT += getservbyport
 NON_REENTRANT += getservent
-NON_REENTRANT += getsgent
-NON_REENTRANT += getsgnam
 NON_REENTRANT += getspent
 NON_REENTRANT += getspnam
 NON_REENTRANT += getutent
@@ -98,7 +80,6 @@ NON_REENTRANT += random
 NON_REENTRANT += rand
 NON_REENTRANT += seed48
 NON_REENTRANT += setstate
-NON_REENTRANT += sgetsgent
 NON_REENTRANT += sgetspent
 NON_REENTRANT += srand48
 NON_REENTRANT += srandom
@@ -117,11 +98,3 @@ NON_REENTRANT += inet_nsap_ntoa
 NON_REENTRANT += inet_ntoa
 NON_REENTRANT += inet_ntop
 NON_REENTRANT += inet_pton
-
-# Separate two nothings by space to get one space in a variable
-space =
-space +=
-# The space needs to be in a variable otherwise it would be ignored.
-# And there must be no spaces around the commas because they would
-# not be ignored, logically.
-NON_REENTRANT_RE=$(subst $(space),|,$(NON_REENTRANT))
--- a/1
+++ b/1
@@ -1 +0,0 @@
-README.rst
--- a/13
+++ b/13
@@ -0,0 +1,13 @@
+
+         LibVirt : simple API for virtualization
+
+  Libvirt is a C toolkit to interact with the virtualization capabilities
+of recent versions of Linux (and other OSes). It is free software
+available under the GNU Lesser General Public License. Virtualization of
+the Linux Operating System means the ability to run multiple instances of
+Operating Systems concurrently on a single hardware system where the basic
+resources are driven by a Linux instance. The library aim at providing
+long term stable C API initially for the Xen paravirtualization but
+should be able to integrate other virtualization mechanisms if needed.
+
+Daniel Veillard <veillard@redhat.com>
--- a/57
+++ b/57
@@ -0,0 +1,57 @@
+-*- outline -*-
+
+These notes intend to help people working on the checked-out sources.
+These requirements do not apply when building from a distribution tarball.
+See also HACKING for more detailed libvirt contribution guidelines.
+
+* Requirements
+
+We've opted to keep only the highest-level sources in the GIT repository.
+This eases our maintenance burden, (fewer merges etc.), but imposes more
+requirements on anyone wishing to build from the just-checked-out sources.
+Note the requirements to build the released archive are much less and
+are just the requirements of the standard ./configure && make procedure.
+Specific development tools and versions will be checked for and listed by
+the bootstrap script.
+
+Valgrind <http://valgrind.org/> is also highly recommended, if
+Valgrind supports your architecture. See also README-valgrind.
+
+While building from a just-cloned source tree may require installing a
+few prerequisites, later, a plain `git pull && make' should be sufficient.
+
+* First GIT checkout
+
+You can get a copy of the source repository like this:
+
+        $ git clone git://libvirt.org/libvirt
+        $ cd libvirt
+
+As an optional step, if you already have a copy of the gnulib git
+repository on your hard drive, then you can use it as a reference to
+reduce download time and disk space requirements:
+
+        $ export GNULIB_SRCDIR=/path/to/gnulib
+
+The next step is to get all required pieces from gnulib,
+to run autoreconf, and to invoke ./configure:
+
+        $ ./autogen.sh
+
+And there you are!  Just
+
+        $ make
+        $ make check
+
+At this point, there should be no difference between your local copy,
+and the GIT master copy:
+
+        $ git diff
+
+should output no difference.
+
+Enjoy!
+
+Local Variables:
+indent-tabs-mode: nil
+End:
--- a/README.rst
+++ b/README.rst
@@ -1,72 +0,0 @@
-.. image:: https://gitlab.com/libvirt/libvirt/badges/master/pipeline.svg
-     :target: https://gitlab.com/libvirt/libvirt/pipelines
-     :alt: GitLab CI Build Status
-.. image:: https://travis-ci.org/libvirt/libvirt.svg
-     :target: https://travis-ci.org/libvirt/libvirt
-     :alt: Travis CI Build Status
-.. image:: https://bestpractices.coreinfrastructure.org/projects/355/badge
-     :target: https://bestpractices.coreinfrastructure.org/projects/355
-     :alt: CII Best Practices
-
-==============================
-Libvirt API for virtualization
-==============================
-
-Libvirt provides a portable, long term stable C API for managing the
-virtualization technologies provided by many operating systems. It
-includes support for QEMU, KVM, Xen, LXC, bhyve, Virtuozzo, VMware
-vCenter and ESX, VMware Desktop, Hyper-V, VirtualBox and the POWER
-Hypervisor.
-
-For some of these hypervisors, it provides a stateful management
-daemon which runs on the virtualization host allowing access to the
-API both by non-privileged local users and remote users.
-
-Layered packages provide bindings of the libvirt C API into other
-languages including Python, Perl, PHP, Go, Java, OCaml, as well as
-mappings into object systems such as GObject, CIM and SNMP.
-
-Further information about the libvirt project can be found on the
-website:
-
-https://libvirt.org
-
-
-License
-=======
-
-The libvirt C API is distributed under the terms of GNU Lesser General
-Public License, version 2.1 (or later). Some parts of the code that are
-not part of the C library may have the more restrictive GNU General
-Public License, version 2.0 (or later). See the files ``COPYING.LESSER``
-and ``COPYING`` for full license terms & conditions.
-
-
-Installation
-============
-
-Instructions on building and installing libvirt can be found on the website:
-
-https://libvirt.org/compiling.html
-
-Contributing
-============
-
-The libvirt project welcomes contributions in many ways. For most components
-the best way to contribute is to send patches to the primary development
-mailing list. Further guidance on this can be found on the website:
-
-https://libvirt.org/contribute.html
-
-
-Contact
-=======
-
-The libvirt project has two primary mailing lists:
-
-* libvirt-users@redhat.com (**for user discussions**)
-* libvir-list@redhat.com (**for development only**)
-
-Further details on contacting the project are available on the website:
-
-https://libvirt.org/contact.html
--- a/22
+++ b/22
@@ -0,0 +1,22 @@
+         libvirt TODO list
+         =================
+
+The TODO list changes frequently, so is maintained online
+in the libvirt bugzilla
+
+  http://bugzilla.redhat.com/
+
+Search against
+
+    Product: Virtualization Tools
+  Component: libvirt
+    Subject: RFE
+
+Or browse dependent bugs under
+
+  https://bugzilla.redhat.com/show_bug.cgi?id=libvirtTodo
+
+Summarized reports automatically generated from bugzilla
+and provided online at
+
+  http://libvirt.org/todo.html
--- a/autobuild.sh
+++ b/autobuild.sh
@@ -0,0 +1,93 @@
+#!/bin/sh
+
+set -e
+set -v
+
+# Make things clean.
+
+test -n "$1" && RESULTS=$1 || RESULTS=results.log
+: ${AUTOBUILD_INSTALL_ROOT=$HOME/builder}
+
+test -f Makefile && make -k distclean || :
+rm -rf coverage
+
+rm -rf build
+mkdir build
+cd build
+
+# Run with options not normally exercised by the rpm build, for
+# more complete code coverage.
+../autogen.sh --prefix="$AUTOBUILD_INSTALL_ROOT" \
+  --enable-test-coverage \
+  --disable-nls \
+  --enable-werror
+
+# If the MAKEFLAGS envvar does not yet include a -j option,
+# add -jN where N depends on the number of processors.
+case $MAKEFLAGS in
+  *-j*) ;;
+  *) n=$(getconf _NPROCESSORS_ONLN 2> /dev/null)
+    test "$n" -gt 0 || n=1
+    n=$(expr $n + 1)
+    MAKEFLAGS="$MAKEFLAGS -j$n"
+    export MAKEFLAGS
+    ;;
+esac
+
+make
+make install
+
+# set -o pipefail is a bashism; this use of exec is the POSIX alternative
+exec 3>&1
+st=$(
+  exec 4>&1 >&3
+  { make check syntax-check 2>&1 3>&- 4>&-; echo $? >&4; } | tee "$RESULTS"
+)
+exec 3>&-
+test "$st" = 0
+test -x /usr/bin/lcov && make cov
+
+rm -f *.tar.gz
+make dist
+
+if [ -n "$AUTOBUILD_COUNTER" ]; then
+  EXTRA_RELEASE=".auto$AUTOBUILD_COUNTER"
+else
+  NOW=`date +"%s"`
+  EXTRA_RELEASE=".$USER$NOW"
+fi
+
+if [ -f /usr/bin/rpmbuild ]; then
+  rpmbuild --nodeps \
+     --define "extra_release $EXTRA_RELEASE" \
+     --define "_sourcedir `pwd`" \
+     -ba --clean libvirt.spec
+fi
+
+# Test mingw cross-compile
+if [ -x /usr/bin/i686-pc-mingw32-gcc ]; then
+  make distclean
+
+  PKG_CONFIG_PATH="$AUTOBUILD_INSTALL_ROOT/i686-pc-mingw32/sys-root/mingw/lib/pkgconfig" \
+  CC="i686-pc-mingw32-gcc" \
+  ../configure \
+    --build=$(uname -m)-pc-linux \
+    --host=i686-pc-mingw32 \
+    --prefix="$AUTOBUILD_INSTALL_ROOT/i686-pc-mingw32/sys-root/mingw" \
+    --enable-werror \
+    --without-libvirtd \
+    --without-python
+
+  make
+  make install
+
+  #set -o pipefail
+  #make check 2>&1 | tee "$RESULTS"
+
+  if [ -f /usr/bin/rpmbuild ]; then
+    rpmbuild --nodeps \
+       --define "extra_release $EXTRA_RELEASE" \
+       --define "_sourcedir `pwd`" \
+       -ba --clean mingw32-libvirt.spec
+  fi
+fi
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,22 +1,24 @@
 #!/bin/sh
 # Run this to generate all the initial makefiles, etc.
-test -n "$srcdir" || srcdir=$(dirname "$0")
-test -n "$srcdir" || srcdir=.

-olddir=$(pwd)
+srcdir=`dirname "$0"`
+test -z "$srcdir" && srcdir=.

+THEDIR=`pwd`
 cd "$srcdir"

-(test -f src/libvirt.c) || {
-    echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
-    echo " top-level libvirt directory"
+test -f src/libvirt.c || {
+    echo "You must run this script in the top-level libvirt directory"
    exit 1
 }

-git submodule update --init || exit 1
-
-autoreconf --verbose --force --install || exit 1

+EXTRA_ARGS=
+no_git=
+if test "x$1" = "x--no-git"; then
+  no_git=" $1"
+  shift
+fi
 if test "x$1" = "x--system"; then
    shift
    prefix=/usr
@@ -27,18 +29,59 @@ if test "x$1" = "x--system"; then
      libdir=$prefix/lib64
    fi
    EXTRA_ARGS="--prefix=$prefix --sysconfdir=$sysconfdir --localstatedir=$localstatedir --libdir=$libdir"
-fi
-
-cd "$olddir"
-
-if [ "$NOCONFIGURE" = "" ]; then
-        $srcdir/configure $EXTRA_ARGS "$@" || exit 1
-
-        if [ "$1" = "--help" ]; then
-                exit 0
-        else
-                echo "Now type 'make' to compile libvirt" || exit 1
-        fi
+    echo "Running ./configure with $EXTRA_ARGS $@"
 else
-        echo "Skipping configure process."
+    if test -z "$*" && test ! -f "$THEDIR/config.status"; then
+        echo "I am going to run ./configure with no arguments - if you wish "
+        echo "to pass any to it, please specify them on the $0 command line."
+    fi
 fi
+
+# Compute the hash we'll use to determine whether rerunning bootstrap
+# is required.  The first is just the SHA1 that selects a gnulib snapshot.
+# The second ensures that whenever we change the set of gnulib modules used
+# by this package, we rerun bootstrap to pull in the matching set of files.
+# The third ensures that whenever we change the set of local gnulib diffs,
+# we rerun bootstrap to pull in those diffs.
+bootstrap_hash()
+{
+    git submodule status | sed 's/^[ +-]//;s/ .*//'
+    git hash-object bootstrap.conf
+    git ls-tree -d HEAD gnulib/local | awk '{print $3}'
+}
+
+# Ensure that whenever we pull in a gnulib update or otherwise change to a
+# different version (i.e., when switching branches), we also rerun ./bootstrap.
+# Also, running 'make rpm' tends to litter the po/ directory, and some people
+# like to run 'git clean -x -f po' to fix it; but only ./bootstrap regenerates
+# the required file po/Makevars.
+# Only run bootstrap from a git checkout, never from a tarball.
+if test -d .git; then
+    curr_status=.git-module-status
+    t=$(bootstrap_hash; git diff .gnulib)
+    if test "$t" = "$(cat $curr_status 2>/dev/null)" \
+        && test -f "po/Makevars"; then
+        # good, it's up to date, all we need is autoreconf
+        autoreconf -if
+    else
+        echo running bootstrap$no_git...
+        ./bootstrap$no_git --bootstrap-sync && bootstrap_hash > $curr_status \
+            || { echo "Failed to bootstrap, please investigate."; exit 1; }
+    fi
+fi
+
+cd "$THEDIR"
+
+if test "x$OBJ_DIR" != x; then
+    mkdir -p "$OBJ_DIR"
+    cd "$OBJ_DIR"
+fi
+
+if test -z "$*" && test -f config.status; then
+    ./config.status --recheck
+else
+    $srcdir/configure $EXTRA_ARGS "$@"
+fi && {
+    echo
+    echo "Now type 'make' to compile libvirt."
+}
--- a/915
+++ b/915
@@ -0,0 +1,915 @@
+#! /bin/sh
+# Print a version string.
+scriptversion=2012-04-25.17; # UTC
+
+# Bootstrap this package from checked-out sources.
+
+# Copyright (C) 2003-2012 Free Software Foundation, Inc.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Originally written by Paul Eggert.  The canonical version of this
+# script is maintained as build-aux/bootstrap in gnulib, however, to
+# be useful to your project, you should place a copy of it under
+# version control in the top-level directory of your project.  The
+# intent is that all customization can be done with a bootstrap.conf
+# file also maintained in your version control; gnulib comes with a
+# template build-aux/bootstrap.conf to get you started.
+
+# Please report bugs or propose patches to bug-gnulib@gnu.org.
+
+nl='
+'
+
+# Ensure file names are sorted consistently across platforms.
+LC_ALL=C
+export LC_ALL
+
+# Ensure that CDPATH is not set.  Otherwise, the output from cd
+# would cause trouble in at least one use below.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+local_gl_dir=gl
+
+me=$0
+
+usage() {
+  cat <<EOF
+Usage: $me [OPTION]...
+Bootstrap this package from the checked-out sources.
+
+Options:
+ --gnulib-srcdir=DIRNAME  specify the local directory where gnulib
+                          sources reside.  Use this if you already
+                          have gnulib sources on your machine, and
+                          do not want to waste your bandwidth downloading
+                          them again.  Defaults to \$GNULIB_SRCDIR
+ --bootstrap-sync         if this bootstrap script is not identical to
+                          the version in the local gnulib sources,
+                          update this script, and then restart it with
+                          /bin/sh or the shell \$CONFIG_SHELL
+ --no-bootstrap-sync      do not check whether bootstrap is out of sync
+ --copy                   copy files instead of creating symbolic links
+ --force                  attempt to bootstrap even if the sources seem
+                          not to have been checked out
+ --no-git                 do not use git to update gnulib.  Requires that
+                          --gnulib-srcdir point to a correct gnulib snapshot
+ --skip-po                do not download po files
+
+If the file $me.conf exists in the same directory as this script, its
+contents are read as shell variables to configure the bootstrap.
+
+For build prerequisites, environment variables like \$AUTOCONF and \$AMTAR
+are honored.
+
+Running without arguments will suffice in most cases.
+EOF
+}
+
+# Configuration.
+
+# Name of the Makefile.am
+gnulib_mk=gnulib.mk
+
+# List of gnulib modules needed.
+gnulib_modules=
+
+# Any gnulib files needed that are not in modules.
+gnulib_files=
+
+: ${AUTOPOINT=autopoint}
+: ${AUTORECONF=autoreconf}
+
+# A function to be called right after gnulib-tool is run.
+# Override it via your own definition in bootstrap.conf.
+bootstrap_post_import_hook() { :; }
+
+# A function to be called after everything else in this script.
+# Override it via your own definition in bootstrap.conf.
+bootstrap_epilogue() { :; }
+
+# The command to download all .po files for a specified domain into
+# a specified directory.  Fill in the first %s is the domain name, and
+# the second with the destination directory.  Use rsync's -L and -r
+# options because the latest/%s directory and the .po files within are
+# all symlinks.
+po_download_command_format=\
+"rsync --delete --exclude '*.s1' -Lrtvz \
+ 'translationproject.org::tp/latest/%s/' '%s'"
+
+# Fallback for downloading .po files (if rsync fails).
+po_download_command_format2=\
+"wget --mirror -nd -q -np -A.po -P '%s' \
+ http://translationproject.org/latest/%s/"
+
+extract_package_name='
+  /^AC_INIT(/{
+     /.*,.*,.*, */{
+       s///
+       s/[][]//g
+       s/)$//
+       p
+       q
+     }
+     s/AC_INIT(\[*//
+     s/]*,.*//
+     s/^GNU //
+     y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+     s/[^A-Za-z0-9_]/-/g
+     p
+  }
+'
+package=`sed -n "$extract_package_name" configure.ac` || exit
+gnulib_name=lib$package
+
+build_aux=build-aux
+source_base=lib
+m4_base=m4
+doc_base=doc
+tests_base=tests
+gnulib_extra_files=''
+
+# Additional gnulib-tool options to use.  Use "\newline" to break lines.
+gnulib_tool_option_extras=
+
+# Other locale categories that need message catalogs.
+EXTRA_LOCALE_CATEGORIES=
+
+# Additional xgettext options to use.  Use "\\\newline" to break lines.
+XGETTEXT_OPTIONS='\\\
+ --flag=_:1:pass-c-format\\\
+ --flag=N_:1:pass-c-format\\\
+ --flag=error:3:c-format --flag=error_at_line:5:c-format\\\
+'
+
+# Package bug report address and copyright holder for gettext files
+COPYRIGHT_HOLDER='Free Software Foundation, Inc.'
+MSGID_BUGS_ADDRESS=bug-$package@gnu.org
+
+# Files we don't want to import.
+excluded_files=
+
+# File that should exist in the top directory of a checked out hierarchy,
+# but not in a distribution tarball.
+checkout_only_file=README-hacking
+
+# Whether to use copies instead of symlinks.
+copy=false
+
+# Set this to '.cvsignore .gitignore' in bootstrap.conf if you want
+# those files to be generated in directories like lib/, m4/, and po/.
+# Or set it to 'auto' to make this script select which to use based
+# on which version control system (if any) is used in the source directory.
+vc_ignore=auto
+
+# Set this to true in bootstrap.conf to enable --bootstrap-sync by
+# default.
+bootstrap_sync=false
+
+# Use git to update gnulib sources
+use_git=true
+
+# find_tool ENVVAR NAMES...
+# -------------------------
+# Search for a required program.  Use the value of ENVVAR, if set,
+# otherwise find the first of the NAMES that can be run (i.e.,
+# supports --version).  If found, set ENVVAR to the program name,
+# die otherwise.
+find_tool ()
+{
+  find_tool_envvar=$1
+  shift
+  find_tool_names=$@
+  eval "find_tool_res=\$$find_tool_envvar"
+  if test x"$find_tool_res" = x; then
+    for i
+    do
+      if ($i --version </dev/null) >/dev/null 2>&1; then
+       find_tool_res=$i
+       break
+      fi
+    done
+  else
+    find_tool_error_prefix="\$$find_tool_envvar: "
+  fi
+  if test x"$find_tool_res" = x; then
+    echo >&2 "$me: one of these is required: $find_tool_names"
+    exit 1
+  fi
+  ($find_tool_res --version </dev/null) >/dev/null 2>&1 || {
+    echo >&2 "$me: ${find_tool_error_prefix}cannot run $find_tool_res --version"
+    exit 1
+  }
+  eval "$find_tool_envvar=\$find_tool_res"
+  eval "export $find_tool_envvar"
+}
+
+# Find sha1sum, named gsha1sum on MacPorts, and shasum on MacOS 10.6.
+find_tool SHA1SUM sha1sum gsha1sum shasum
+
+# Override the default configuration, if necessary.
+# Make sure that bootstrap.conf is sourced from the current directory
+# if we were invoked as "sh bootstrap".
+case "$0" in
+  */*) test -r "$0.conf" && . "$0.conf" ;;
+  *) test -r "$0.conf" && . ./"$0.conf" ;;
+esac
+
+# Extra files from gnulib, which override files from other sources.
+test -z "${gnulib_extra_files}" && \
+  gnulib_extra_files="
+        $build_aux/install-sh
+        $build_aux/missing
+        $build_aux/mdate-sh
+        $build_aux/texinfo.tex
+        $build_aux/depcomp
+        $build_aux/config.guess
+        $build_aux/config.sub
+        doc/INSTALL
+"
+
+if test "$vc_ignore" = auto; then
+  vc_ignore=
+  test -d .git && vc_ignore=.gitignore
+  test -d CVS && vc_ignore="$vc_ignore .cvsignore"
+fi
+
+# Translate configuration into internal form.
+
+# Parse options.
+
+for option
+do
+  case $option in
+  --help)
+    usage
+    exit;;
+  --gnulib-srcdir=*)
+    GNULIB_SRCDIR=`expr "X$option" : 'X--gnulib-srcdir=\(.*\)'`;;
+  --skip-po)
+    SKIP_PO=t;;
+  --force)
+    checkout_only_file=;;
+  --copy)
+    copy=true;;
+  --bootstrap-sync)
+    bootstrap_sync=true;;
+  --no-bootstrap-sync)
+    bootstrap_sync=false;;
+  --no-git)
+    use_git=false;;
+  *)
+    echo >&2 "$0: $option: unknown option"
+    exit 1;;
+  esac
+done
+
+if $use_git || test -d "$GNULIB_SRCDIR"; then
+  :
+else
+  echo "$0: Error: --no-git requires --gnulib-srcdir" >&2
+  exit 1
+fi
+
+if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
+  echo "$0: Bootstrapping from a non-checked-out distribution is risky." >&2
+  exit 1
+fi
+
+# Ensure that lines starting with ! sort last, per gitignore conventions
+# for whitelisting exceptions after a more generic blacklist pattern.
+sort_patterns() {
+  sort -u "$@" | sed '/^!/ {
+    H
+    d
+  }
+  $ {
+    P
+    x
+    s/^\n//
+  }' | sed '/^$/d'
+}
+
+# If $STR is not already on a line by itself in $FILE, insert it,
+# sorting the new contents of the file and replacing $FILE with the result.
+insert_sorted_if_absent() {
+  file=$1
+  str=$2
+  test -f $file || touch $file
+  echo "$str" | sort_patterns - $file | cmp - $file > /dev/null \
+    || { echo "$str" | sort_patterns - $file > $file.bak \
+      && mv $file.bak $file; } \
+    || exit 1
+}
+
+# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
+# insert_sorted_if_absent.
+insert_vc_ignore() {
+  vc_ignore_file="$1"
+  pattern="$2"
+  case $vc_ignore_file in
+  *.gitignore)
+    # A .gitignore entry that does not start with '/' applies
+    # recursively to subdirectories, so prepend '/' to every
+    # .gitignore entry.
+    pattern=`echo "$pattern" | sed s,^,/,`;;
+  esac
+  insert_sorted_if_absent "$vc_ignore_file" "$pattern"
+}
+
+# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
+found_aux_dir=no
+grep '^[	 ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \
+    >/dev/null && found_aux_dir=yes
+grep '^[	 ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
+    >/dev/null && found_aux_dir=yes
+if test $found_aux_dir = no; then
+  echo "$0: expected line not found in configure.ac. Add the following:" >&2
+  echo "  AC_CONFIG_AUX_DIR([$build_aux])" >&2
+  exit 1
+fi
+
+# If $build_aux doesn't exist, create it now, otherwise some bits
+# below will malfunction.  If creating it, also mark it as ignored.
+if test ! -d $build_aux; then
+  mkdir $build_aux
+  for dot_ig in x $vc_ignore; do
+    test $dot_ig = x && continue
+    insert_vc_ignore $dot_ig $build_aux
+  done
+fi
+
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+sort_ver() { # sort -V is not generally available
+  ver1="$1"
+  ver2="$2"
+
+  # split on '.' and compare each component
+  i=1
+  while : ; do
+    p1=$(echo "$ver1" | cut -d. -f$i)
+    p2=$(echo "$ver2" | cut -d. -f$i)
+    if [ ! "$p1" ]; then
+      echo "$1 $2"
+      break
+    elif [ ! "$p2" ]; then
+      echo "$2 $1"
+      break
+    elif [ ! "$p1" = "$p2" ]; then
+      if [ "$p1" -gt "$p2" ] 2>/dev/null; then # numeric comparison
+        echo "$2 $1"
+      elif [ "$p2" -gt "$p1" ] 2>/dev/null; then # numeric comparison
+        echo "$1 $2"
+      else # numeric, then lexicographic comparison
+        lp=$(printf "$p1\n$p2\n" | LANG=C sort -n | tail -n1)
+        if [ "$lp" = "$p2" ]; then
+          echo "$1 $2"
+        else
+          echo "$2 $1"
+        fi
+      fi
+      break
+    fi
+    i=$(($i+1))
+  done
+}
+
+get_version() {
+  app=$1
+
+  $app --version >/dev/null 2>&1 || return 1
+
+  $app --version 2>&1 |
+  sed -n '# Move version to start of line.
+          s/.*[v ]\([0-9]\)/\1/
+
+          # Skip lines that do not start with version.
+          /^[0-9]/!d
+
+          # Remove characters after the version.
+          s/[^.a-z0-9-].*//
+
+          # The first component must be digits only.
+          s/^\([0-9]*\)[a-z-].*/\1/
+
+          #the following essentially does s/5.005/5.5/
+          s/\.0*\([1-9]\)/.\1/g
+          p
+          q'
+}
+
+check_versions() {
+  ret=0
+
+  while read app req_ver; do
+    # We only need libtoolize from the libtool package.
+    if test "$app" = libtool; then
+      app=libtoolize
+    fi
+    # Exempt git if --no-git is in effect.
+    if test "$app" = git; then
+      $use_git || continue
+    fi
+    # Honor $APP variables ($TAR, $AUTOCONF, etc.)
+    appvar=`echo $app | LC_ALL=C tr '[a-z]-' '[A-Z]_'`
+    test "$appvar" = TAR && appvar=AMTAR
+    case $appvar in
+        GZIP) ;; # Do not use $GZIP:  it contains gzip options.
+        *) eval "app=\${$appvar-$app}" ;;
+    esac
+    if [ "$req_ver" = "-" ]; then
+      # Merely require app to exist; not all prereq apps are well-behaved
+      # so we have to rely on $? rather than get_version.
+      $app --version >/dev/null 2>&1
+      if [ 126 -le $? ]; then
+        echo "$me: Error: '$app' not found" >&2
+        ret=1
+      fi
+    else
+      # Require app to produce a new enough version string.
+      inst_ver=$(get_version $app)
+      if [ ! "$inst_ver" ]; then
+        echo "$me: Error: '$app' not found" >&2
+        ret=1
+      else
+        latest_ver=$(sort_ver $req_ver $inst_ver | cut -d' ' -f2)
+        if [ ! "$latest_ver" = "$inst_ver" ]; then
+          echo "$me: Error: '$app' version == $inst_ver is too old" >&2
+          echo "       '$app' version >= $req_ver is required" >&2
+          ret=1
+        fi
+      fi
+    fi
+  done
+
+  return $ret
+}
+
+print_versions() {
+  echo "Program    Min_version"
+  echo "----------------------"
+  printf %s "$buildreq"
+  echo "----------------------"
+  # can't depend on column -t
+}
+
+use_libtool=0
+# We'd like to use grep -E, to see if any of LT_INIT,
+# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
+# but that's not portable enough (e.g., for Solaris).
+grep '^[	 ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
+  && use_libtool=1
+grep '^[	 ]*LT_INIT' configure.ac >/dev/null \
+  && use_libtool=1
+if test $use_libtool = 1; then
+  find_tool LIBTOOLIZE glibtoolize libtoolize
+fi
+
+# gnulib-tool requires at least automake and autoconf.
+# If either is not listed, add it (with minimum version) as a prerequisite.
+case $buildreq in
+  *automake*) ;;
+  *) buildreq="automake 1.9
+$buildreq" ;;
+esac
+case $buildreq in
+  *autoconf*) ;;
+  *) buildreq="autoconf 2.59
+$buildreq" ;;
+esac
+
+# When we can deduce that gnulib-tool will require patch,
+# and when patch is not already listed as a prerequisite, add it, too.
+if test ! -d "$local_gl_dir" \
+    || find "$local_gl_dir" -name '*.diff' -exec false {} +; then
+  :
+else
+  case $buildreq in
+    *patch*) ;;
+    *) buildreq="patch -
+$buildreq" ;;
+  esac
+fi
+
+if ! printf "$buildreq" | check_versions; then
+  echo >&2
+  if test -f README-prereq; then
+    echo "$0: See README-prereq for how to get the prerequisite programs" >&2
+  else
+    echo "$0: Please install the prerequisite programs" >&2
+  fi
+  exit 1
+fi
+
+echo "$0: Bootstrapping from checked-out $package sources..."
+
+# See if we can use gnulib's git-merge-changelog merge driver.
+if test -d .git && (git --version) >/dev/null 2>/dev/null ; then
+  if git config merge.merge-changelog.driver >/dev/null ; then
+    :
+  elif (git-merge-changelog --version) >/dev/null 2>/dev/null ; then
+    echo "$0: initializing git-merge-changelog driver"
+    git config merge.merge-changelog.name 'GNU-style ChangeLog merge driver'
+    git config merge.merge-changelog.driver 'git-merge-changelog %O %A %B'
+  else
+    echo "$0: consider installing git-merge-changelog from gnulib"
+  fi
+fi
+
+
+cleanup_gnulib() {
+  status=$?
+  rm -fr "$gnulib_path"
+  exit $status
+}
+
+git_modules_config () {
+  test -f .gitmodules && git config --file .gitmodules "$@"
+}
+
+gnulib_path=`git_modules_config submodule.gnulib.path`
+test -z "$gnulib_path" && gnulib_path=gnulib
+
+# Get gnulib files.
+
+case ${GNULIB_SRCDIR--} in
+-)
+  if git_modules_config submodule.gnulib.url >/dev/null; then
+    echo "$0: getting gnulib files..."
+    git submodule init || exit $?
+    git submodule update || exit $?
+
+  elif [ ! -d "$gnulib_path" ]; then
+    echo "$0: getting gnulib files..."
+
+    trap cleanup_gnulib 1 2 13 15
+
+    shallow=
+    git clone -h 2>&1 | grep -- --depth > /dev/null && shallow='--depth 2'
+    git clone $shallow git://git.sv.gnu.org/gnulib "$gnulib_path" ||
+      cleanup_gnulib
+
+    trap - 1 2 13 15
+  fi
+  GNULIB_SRCDIR=$gnulib_path
+  ;;
+*)
+  # Use GNULIB_SRCDIR as a reference.
+  if test -d "$GNULIB_SRCDIR"/.git && \
+        git_modules_config submodule.gnulib.url >/dev/null; then
+    echo "$0: getting gnulib files..."
+    if git submodule -h|grep -- --reference > /dev/null; then
+      # Prefer the one-liner available in git 1.6.4 or newer.
+      git submodule update --init --reference "$GNULIB_SRCDIR" \
+        "$gnulib_path" || exit $?
+    else
+      # This fallback allows at least git 1.5.5.
+      if test -f "$gnulib_path"/gnulib-tool; then
+        # Since file already exists, assume submodule init already complete.
+        git submodule update || exit $?
+      else
+        # Older git can't clone into an empty directory.
+        rmdir "$gnulib_path" 2>/dev/null
+        git clone --reference "$GNULIB_SRCDIR" \
+          "$(git_modules_config submodule.gnulib.url)" "$gnulib_path" \
+          && git submodule init && git submodule update \
+          || exit $?
+      fi
+    fi
+    GNULIB_SRCDIR=$gnulib_path
+  fi
+  ;;
+esac
+
+if $bootstrap_sync; then
+  cmp -s "$0" "$GNULIB_SRCDIR/build-aux/bootstrap" || {
+    echo "$0: updating bootstrap and restarting..."
+    exec sh -c \
+      'cp "$1" "$2" && shift && exec "${CONFIG_SHELL-/bin/sh}" "$@"' \
+      -- "$GNULIB_SRCDIR/build-aux/bootstrap" \
+      "$0" "$@" --no-bootstrap-sync
+  }
+fi
+
+gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
+<$gnulib_tool || exit $?
+
+# Get translations.
+
+download_po_files() {
+  subdir=$1
+  domain=$2
+  echo "$me: getting translations into $subdir for $domain..."
+  cmd=`printf "$po_download_command_format" "$domain" "$subdir"`
+  eval "$cmd" && return
+  # Fallback to HTTP.
+  cmd=`printf "$po_download_command_format2" "$subdir" "$domain"`
+  eval "$cmd"
+}
+
+# Mirror .po files to $po_dir/.reference and copy only the new
+# or modified ones into $po_dir.  Also update $po_dir/LINGUAS.
+# Note po files that exist locally only are left in $po_dir but will
+# not be included in LINGUAS and hence will not be distributed.
+update_po_files() {
+  # Directory containing primary .po files.
+  # Overwrite them only when we're sure a .po file is new.
+  po_dir=$1
+  domain=$2
+
+  # Mirror *.po files into this dir.
+  # Usually contains *.s1 checksum files.
+  ref_po_dir="$po_dir/.reference"
+
+  test -d $ref_po_dir || mkdir $ref_po_dir || return
+  download_po_files $ref_po_dir $domain \
+    && ls "$ref_po_dir"/*.po 2>/dev/null |
+      sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS" || return
+
+  langs=`cd $ref_po_dir && echo *.po|sed 's/\.po//g'`
+  test "$langs" = '*' && langs=x
+  for po in $langs; do
+    case $po in x) continue;; esac
+    new_po="$ref_po_dir/$po.po"
+    cksum_file="$ref_po_dir/$po.s1"
+    if ! test -f "$cksum_file" ||
+        ! test -f "$po_dir/$po.po" ||
+        ! $SHA1SUM -c --status "$cksum_file" \
+            < "$new_po" > /dev/null; then
+      echo "$me: updated $po_dir/$po.po..."
+      cp "$new_po" "$po_dir/$po.po" \
+          && $SHA1SUM < "$new_po" > "$cksum_file"
+    fi
+  done
+}
+
+case $SKIP_PO in
+'')
+  if test -d po; then
+    update_po_files po $package || exit
+  fi
+
+  if test -d runtime-po; then
+    update_po_files runtime-po $package-runtime || exit
+  fi;;
+esac
+
+symlink_to_dir()
+{
+  src=$1/$2
+  dst=${3-$2}
+
+  test -f "$src" && {
+
+    # If the destination directory doesn't exist, create it.
+    # This is required at least for "lib/uniwidth/cjk.h".
+    dst_dir=`dirname "$dst"`
+    if ! test -d "$dst_dir"; then
+      mkdir -p "$dst_dir"
+
+      # If we've just created a directory like lib/uniwidth,
+      # tell version control system(s) it's ignorable.
+      # FIXME: for now, this does only one level
+      parent=`dirname "$dst_dir"`
+      for dot_ig in x $vc_ignore; do
+        test $dot_ig = x && continue
+        ig=$parent/$dot_ig
+        insert_vc_ignore $ig `echo "$dst_dir"|sed 's,.*/,,'`
+      done
+    fi
+
+    if $copy; then
+      {
+        test ! -h "$dst" || {
+          echo "$me: rm -f $dst" &&
+          rm -f "$dst"
+        }
+      } &&
+      test -f "$dst" &&
+      cmp -s "$src" "$dst" || {
+        echo "$me: cp -fp $src $dst" &&
+        cp -fp "$src" "$dst"
+      }
+    else
+      # Leave any existing symlink alone, if it already points to the source,
+      # so that broken build tools that care about symlink times
+      # aren't confused into doing unnecessary builds.  Conversely, if the
+      # existing symlink's time stamp is older than the source, make it afresh,
+      # so that broken tools aren't confused into skipping needed builds.  See
+      # <http://lists.gnu.org/archive/html/bug-gnulib/2011-05/msg00326.html>.
+      test -h "$dst" &&
+      src_ls=`ls -diL "$src" 2>/dev/null` && set $src_ls && src_i=$1 &&
+      dst_ls=`ls -diL "$dst" 2>/dev/null` && set $dst_ls && dst_i=$1 &&
+      test "$src_i" = "$dst_i" &&
+      both_ls=`ls -dt "$src" "$dst"` &&
+      test "X$both_ls" = "X$dst$nl$src" || {
+        dot_dots=
+        case $src in
+        /*) ;;
+        *)
+          case /$dst/ in
+          *//* | */../* | */./* | /*/*/*/*/*/)
+             echo >&2 "$me: invalid symlink calculation: $src -> $dst"
+             exit 1;;
+          /*/*/*/*/)	dot_dots=../../../;;
+          /*/*/*/)	dot_dots=../../;;
+          /*/*/)	dot_dots=../;;
+          esac;;
+        esac
+
+        echo "$me: ln -fs $dot_dots$src $dst" &&
+        ln -fs "$dot_dots$src" "$dst"
+      }
+    fi
+  }
+}
+
+# NOTE: we have to be careful to run both autopoint and libtoolize
+# before gnulib-tool, since gnulib-tool is likely to provide newer
+# versions of files "installed" by these two programs.
+# Then, *after* gnulib-tool (see below), we have to be careful to
+# run autoreconf in such a way that it does not run either of these
+# two just-pre-run programs.
+
+# Import from gettext.
+with_gettext=yes
+grep '^[	 ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
+    with_gettext=no
+
+if test $with_gettext = yes; then
+  # Released autopoint has the tendency to install macros that have been
+  # obsoleted in current gnulib, so run this before gnulib-tool.
+  echo "$0: $AUTOPOINT --force"
+  $AUTOPOINT --force || exit
+fi
+
+# Autoreconf runs aclocal before libtoolize, which causes spurious
+# warnings if the initial aclocal is confused by the libtoolized
+# (or worse out-of-date) macro directory.
+# libtoolize 1.9b added the --install option; but we support back
+# to libtoolize 1.5.22, where the install action was default.
+if test $use_libtool = 1; then
+  install=
+  case $($LIBTOOLIZE --help) in
+    *--install*) install=--install ;;
+  esac
+  echo "running: $LIBTOOLIZE $install --copy"
+  $LIBTOOLIZE $install --copy
+fi
+
+version_controlled_file() {
+  dir=$1
+  file=$2
+  found=no
+  if test -d CVS; then
+    grep -F "/$file/" $dir/CVS/Entries 2>/dev/null |
+             grep '^/[^/]*/[0-9]' > /dev/null && found=yes
+  elif test -d .git; then
+    git rm -n "$dir/$file" > /dev/null 2>&1 && found=yes
+  elif test -d .svn; then
+    svn log -r HEAD "$dir/$file" > /dev/null 2>&1 && found=yes
+  else
+    echo "$me: no version control for $dir/$file?" >&2
+  fi
+  test $found = yes
+}
+
+# Import from gnulib.
+
+gnulib_tool_options="\
+ --import\
+ --no-changelog\
+ --aux-dir $build_aux\
+ --doc-base $doc_base\
+ --lib $gnulib_name\
+ --m4-base $m4_base/\
+ --source-base $source_base/\
+ --tests-base $tests_base\
+ --local-dir $local_gl_dir\
+ $gnulib_tool_option_extras\
+"
+if test $use_libtool = 1; then
+  case "$gnulib_tool_options " in
+    *' --libtool '*) ;;
+    *) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
+  esac
+fi
+echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
+$gnulib_tool $gnulib_tool_options --import $gnulib_modules &&
+
+for file in $gnulib_files; do
+  symlink_to_dir "$GNULIB_SRCDIR" $file || exit
+done
+
+bootstrap_post_import_hook \
+  || { echo >&2 "$me: bootstrap_post_import_hook failed"; exit 1; }
+
+# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
+# gnulib-populated directories.  Such .m4 files would cause aclocal to fail.
+# The following requires GNU find 4.2.3 or newer.  Considering the usual
+# portability constraints of this script, that may seem a very demanding
+# requirement, but it should be ok.  Ignore any failure, which is fine,
+# since this is only a convenience to help developers avoid the relatively
+# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
+# between successive runs of this script.
+find "$m4_base" "$source_base" \
+  -depth \( -name '*.m4' -o -name '*.[ch]' \) \
+  -type l -xtype l -delete > /dev/null 2>&1
+
+# Some systems (RHEL 5) are using ancient autotools, for which the
+# --no-recursive option had not been invented.  Detect that lack and
+# omit the option when it's not supported.  FIXME in 2017: remove this
+# hack when RHEL 5 autotools are updated, or when they become irrelevant.
+no_recursive=
+case $($AUTORECONF --help) in
+  *--no-recursive*) no_recursive=--no-recursive;;
+esac
+
+# Tell autoreconf not to invoke autopoint or libtoolize; they were run above.
+echo "running: AUTOPOINT=true LIBTOOLIZE=true " \
+    "$AUTORECONF --verbose --install $no_recursive -I $m4_base $ACLOCAL_FLAGS"
+AUTOPOINT=true LIBTOOLIZE=true \
+    $AUTORECONF --verbose --install $no_recursive -I $m4_base $ACLOCAL_FLAGS \
+  || exit 1
+
+# Get some extra files from gnulib, overriding existing files.
+for file in $gnulib_extra_files; do
+  case $file in
+  */INSTALL) dst=INSTALL;;
+  build-aux/*) dst=$build_aux/`expr "$file" : 'build-aux/\(.*\)'`;;
+  *) dst=$file;;
+  esac
+  symlink_to_dir "$GNULIB_SRCDIR" $file $dst || exit
+done
+
+if test $with_gettext = yes; then
+  # Create gettext configuration.
+  echo "$0: Creating po/Makevars from po/Makevars.template ..."
+  rm -f po/Makevars
+  sed '
+    /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
+    /^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
+    /^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
+    /^XGETTEXT_OPTIONS *=/{
+      s/$/ \\/
+      a\
+          '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
+    }
+  ' po/Makevars.template >po/Makevars || exit 1
+
+  # If the 'gettext' module is in use, grab the latest Makefile.in.in.
+  # If only the 'gettext-h' module is in use, assume autopoint already
+  # put the correct version of this file into place.
+  case $gnulib_modules in
+  *gettext-h*) ;;
+  *gettext*)
+    cp $GNULIB_SRCDIR/build-aux/po/Makefile.in.in po/Makefile.in.in || exit 1
+    ;;
+  esac
+
+  if test -d runtime-po; then
+    # Similarly for runtime-po/Makevars, but not quite the same.
+    rm -f runtime-po/Makevars
+    sed '
+      /^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
+      /^subdir *=.*/s/=.*/= runtime-po/
+      /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
+      /^XGETTEXT_OPTIONS *=/{
+        s/$/ \\/
+        a\
+            '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
+      }
+    ' po/Makevars.template >runtime-po/Makevars || exit 1
+
+    # Copy identical files from po to runtime-po.
+    (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
+  fi
+fi
+
+bootstrap_epilogue
+
+echo "$0: done.  Now you can run './configure'."
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- a/bootstrap.conf
+++ b/bootstrap.conf
@@ -0,0 +1,241 @@
+# Bootstrap configuration.
+
+# Copyright (C) 2010-2012 Red Hat, Inc.
+
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+
+
+# gnulib modules used by this package.
+gnulib_modules='
+accept
+areadlink
+base64
+bind
+bitrotate
+byteswap
+c-ctype
+c-strcase
+c-strcasestr
+calloc-posix
+canonicalize-lgpl
+chown
+close
+connect
+configmake
+count-one-bits
+crypto/md5
+dirname-lgpl
+environ
+fclose
+fcntl
+fcntl-h
+fdatasync
+ffs
+fnmatch
+fsync
+func
+getaddrinfo
+getcwd-lgpl
+gethostname
+getpass
+getpeername
+getsockname
+gettext-h
+gettimeofday
+gitlog-to-changelog
+gnumakefile
+ignore-value
+inet_pton
+intprops
+ioctl
+largefile
+listen
+maintainer-makefile
+manywarnings
+mkstemp
+mkstemps
+mktempd
+netdb
+nonblocking
+openpty
+passfd
+perror
+physmem
+pipe-posix
+pipe2
+poll
+posix-shell
+pthread
+pthread_sigmask
+recv
+regex
+random_r
+sched
+send
+setsockopt
+sigaction
+sigpipe
+snprintf
+socket
+stdarg
+stpcpy
+strchrnul
+strdup-posix
+strndup
+strerror
+strerror_r-posix
+strptime
+strsep
+strtok_r
+sys_stat
+sys_wait
+termios
+time_r
+timegm
+ttyname_r
+uname
+useless-if-before-free
+usleep
+vasprintf
+verify
+vc-list-files
+vsnprintf
+waitpid
+warnings
+'
+
+# Additional xgettext options to use.  Use "\\\newline" to break lines.
+XGETTEXT_OPTIONS=$XGETTEXT_OPTIONS'\\\
+ --flag=virAsprintf:2:c-format\\\
+ --from-code=UTF-8\\\
+'
+
+# This is not a GNU package, so the default bug address is invalid,
+# and the translation project is not in use.
+MSGID_BUGS_ADDRESS=libvir-list@redhat.com
+COPYRIGHT_HOLDER='Red Hat, Inc.'
+SKIP_PO=true
+
+# Enable copy-mode for MSYS/MinGW. MSYS' ln doesn't work well in the way
+# bootstrap uses it with relative paths.
+if test -n "$MSYSTEM"; then
+    copy=true
+fi
+
+# If "AM_GNU_GETTEXT(external" or "AM_GNU_GETTEXT([external]"
+# appears in configure.ac, exclude some unnecessary files.
+# Without grep's -E option (not portable enough, pre-configure),
+# the following test is ugly.  Also, this depends on the existence
+# of configure.ac, not the obsolescent-named configure.in.  But if
+# you're using this infrastructure, you should care about such things.
+
+gettext_external=0
+grep '^[	 ]*AM_GNU_GETTEXT(external\>' configure.ac > /dev/null &&
+  gettext_external=1
+grep '^[	 ]*AM_GNU_GETTEXT(\[external\]' configure.ac > /dev/null &&
+  gettext_external=1
+
+if test $gettext_external = 1; then
+  # Gettext supplies these files, but we don't need them since
+  # we don't have an intl subdirectory.
+  excluded_files='
+      m4/glibc2.m4
+      m4/intdiv0.m4
+      m4/lcmessage.m4
+      m4/uintmax_t.m4
+      m4/ulonglong.m4
+      m4/visibility.m4
+  '
+fi
+
+# Tell gnulib to:
+#   require LGPLv2+
+#   apply any local diffs in gnulib/local/ dir
+#   put *.m4 files in new gnulib/m4/ dir
+#   put *.[ch] files in new gnulib/lib/ dir
+#   import gnulib tests in new gnulib/tests/ dir
+gnulib_name=libgnu
+m4_base=gnulib/m4
+source_base=gnulib/lib
+tests_base=gnulib/tests
+gnulib_tool_option_extras="\
+ --lgpl=2\
+ --with-tests\
+ --makefile-name=gnulib.mk\
+ --avoid=pt_chown\
+ --avoid=lock-tests\
+"
+local_gl_dir=gnulib/local
+
+# Convince bootstrap to use multiple m4 directories.
+: ${ACLOCAL=aclocal}
+ACLOCAL="$ACLOCAL -I m4"
+export ACLOCAL
+
+# Build prerequisites
+# Note that some of these programs are only required for 'make dist' to
+# succeed from a fresh git checkout; not all of these programs are
+# required to run 'make dist' on a tarball.  As a special case, we want
+# to require the equivalent of the Fedora python-devel package, but
+# RHEL 5 lacks the witness python-config package; we hack around that
+# old environment below.
+buildreq="\
+autoconf   2.59
+automake   1.9.6
+autopoint  -
+gettext    0.17
+git        1.5.5
+gzip       -
+libtool    -
+patch      -
+perl       5.5
+pkg-config -
+python-config -
+rpcgen     -
+tar        -
+xmllint	   -
+xsltproc   -
+"
+# Use rpm as a fallback to bypass the bootstrap probe for python-config,
+# for the sake of RHEL 5; without requiring it on newer systems that
+# have python-config to begin with.
+if `(${PYTHON_CONFIG-python-config} --version;
+     test $? -lt 126 || rpm -q python-devel) >/dev/null 2>&1`; then
+  PYTHON_CONFIG=true
+fi
+
+# Automake requires that ChangeLog exist.
+touch ChangeLog || exit 1
+
+# Override bootstrap's list - we don't use mdate-sh or texinfo.tex.
+gnulib_extra_files="
+        $build_aux/install-sh
+        $build_aux/missing
+        $build_aux/depcomp
+        $build_aux/config.guess
+        $build_aux/config.sub
+        doc/INSTALL
+"
+
+
+bootstrap_epilogue()
+{
+  # Change paths in gnulib/tests/gnulib.mk from "../../.." to "../..",
+  # then ensure that gnulib/tests/Makefile.in is up-to-date.
+  m=gnulib/tests/gnulib.mk
+  sed 's,\.\./\.\./\.\.,../..,g' $m > $m-t
+  mv -f $m-t $m
+  ${AUTOMAKE-automake} gnulib/tests/Makefile
+}
--- a/build-aux/check-spacing.pl
+++ b/build-aux/check-spacing.pl
@@ -1,198 +0,0 @@
-#!/usr/bin/env perl
-#
-# check-spacing.pl: Report any usage of 'function (..args..)'
-# Also check for other syntax issues, such as correct use of ';'
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library.  If not, see
-# <http://www.gnu.org/licenses/>.
-
-use strict;
-use warnings;
-
-my $ret = 0;
-my $incomment = 0;
-
-foreach my $file (@ARGV) {
-    # Per-file variables for multiline Curly Bracket (cb_) check
-    my $cb_linenum = 0;
-    my $cb_code = "";
-    my $cb_scolon = 0;
-
-    open FILE, $file;
-
-    while (defined (my $line = <FILE>)) {
-        my $data = $line;
-        # For temporary modifications
-        my $tmpdata;
-
-        # Kill any quoted , ; = or "
-        $data =~ s/'[";,=]'/'X'/g;
-
-        # Kill any quoted strings
-        $data =~ s,"(?:[^\\\"]|\\.)*","XXX",g;
-
-        next if $data =~ /^#/;
-
-        # Kill contents of multi-line comments
-        # and detect end of multi-line comments
-        if ($incomment) {
-            if ($data =~ m,\*/,) {
-                $incomment = 0;
-                $data =~ s,^.*\*/,*/,;
-            } else {
-                $data = "";
-            }
-        }
-
-        # Kill single line comments, and detect
-        # start of multi-line comments
-        if ($data =~ m,/\*.*\*/,) {
-            $data =~ s,/\*.*\*/,/* */,;
-        } elsif ($data =~ m,/\*,) {
-            $incomment = 1;
-            $data =~ s,/\*.*,/*,;
-        }
-
-        # We need to match things like
-        #
-        #  int foo (int bar, bool wizz);
-        #  foo (bar, wizz);
-        #
-        # but not match things like:
-        #
-        #  typedef int (*foo)(bar wizz)
-        #
-        # we can't do this (efficiently) without
-        # missing things like
-        #
-        #  foo (*bar, wizz);
-        #
-        # We also don't want to spoil the $data so it can be used
-        # later on.
-        $tmpdata = $data;
-        while ($tmpdata =~ /(\w+)\s\((?!\*)/) {
-            my $kw = $1;
-
-            # Allow space after keywords only
-            if ($kw =~ /^(?:if|for|while|switch|return)$/) {
-                $tmpdata =~ s/(?:$kw\s\()/XXX(/;
-            } else {
-                print "Whitespace after non-keyword:\n";
-                print "$file:$.: $line";
-                $ret = 1;
-                last;
-            }
-        }
-
-        # Require whitespace immediately after keywords
-        if ($data =~ /\b(?:if|for|while|switch|return)\(/) {
-            print "No whitespace after keyword:\n";
-            print "$file:$.: $line";
-            $ret = 1;
-        }
-
-        # Forbid whitespace between )( of a function typedef
-        if ($data =~ /\(\*\w+\)\s+\(/) {
-            print "Whitespace between ')' and '(':\n";
-            print "$file:$.: $line";
-            $ret = 1;
-        }
-
-        # Forbid whitespace following ( or prior to )
-        # but allow whitespace before ) on a single line
-        # (optionally followed by a semicolon)
-        if (($data =~ /\s\)/ && not $data =~ /^\s+\);?$/) ||
-            $data =~ /\((?!$)\s/) {
-            print "Whitespace after '(' or before ')':\n";
-            print "$file:$.: $line";
-            $ret = 1;
-        }
-
-        # Forbid whitespace before ";" or ",". Things like below are allowed:
-        #
-        # 1) The expression is empty for "for" loop. E.g.
-        #   for (i = 0; ; i++)
-        #
-        # 2) An empty statement. E.g.
-        #   while (write(statuswrite, &status, 1) == -1 &&
-        #          errno == EINTR)
-        #       ;
-        #
-        if ($data =~ /\s[;,]/) {
-            unless ($data =~ /\S; ; / ||
-                    $data =~ /^\s+;/) {
-                print "Whitespace before semicolon or comma:\n";
-                print "$file:$.: $line";
-                $ret = 1;
-            }
-        }
-
-        # Require EOL, macro line continuation, or whitespace after ";".
-        # Allow "for (;;)" as an exception.
-        if ($data =~ /;[^	 \\\n;)]/) {
-            print "Invalid character after semicolon:\n";
-            print "$file:$.: $line";
-            $ret = 1;
-        }
-
-        # Require EOL, space, or enum/struct end after comma.
-        if ($data =~ /,[^ \\\n)}]/) {
-            print "Invalid character after comma:\n";
-            print "$file:$.: $line";
-            $ret = 1;
-        }
-
-        # Require spaces around assignment '=', compounds and '=='
-        if ($data =~ /[^ ]\b[!<>&|\-+*\/%\^=]?=/ ||
-            $data =~ /=[^= \\\n]/) {
-            print "Spacing around '=' or '==':\n";
-            print "$file:$.: $line";
-            $ret = 1;
-        }
-
-        # One line conditional statements with one line bodies should
-        # not use curly brackets.
-        if ($data =~ /^\s*(if|while|for)\b.*\{$/) {
-            $cb_linenum = $.;
-            $cb_code = $line;
-            $cb_scolon = 0;
-        }
-
-        # We need to check for exactly one semicolon inside the body,
-        # because empty statements (e.g. with comment only) are
-        # allowed
-        if ($cb_linenum == $. - 1 && $data =~ /^[^;]*;[^;]*$/) {
-            $cb_code .= $line;
-            $cb_scolon = 1;
-        }
-
-        if ($data =~ /^\s*}\s*$/ &&
-            $cb_linenum == $. - 2 &&
-            $cb_scolon) {
-
-            print "Curly brackets around single-line body:\n";
-            print "$file:$cb_linenum-$.:\n$cb_code$line";
-            $ret = 1;
-
-            # There _should_ be no need to reset the values; but to
-            # keep my inner peace...
-            $cb_linenum = 0;
-            $cb_scolon = 0;
-            $cb_code = "";
-        }
-    }
-    close FILE;
-}
-
-exit $ret;
--- a/build-aux/syntax-check.mk
+++ b/build-aux/syntax-check.mk
--- a/build-aux/useless-if-before-free
+++ b/build-aux/useless-if-before-free
@@ -1,226 +0,0 @@
-#!/bin/sh
-#! -*-perl-*-
-
-# Detect instances of "if (p) free (p);".
-# Likewise "if (p != 0)", "if (0 != p)", or with NULL; and with braces.
-
-# Copyright (C) 2008-2019 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-#
-# Written by Jim Meyering
-
-# This is a prologue that allows to run a perl script as an executable
-# on systems that are compliant to a POSIX version before POSIX:2017.
-# On such systems, the usual invocation of an executable through execlp()
-# or execvp() fails with ENOEXEC if it is a script that does not start
-# with a #! line.  The script interpreter mentioned in the #! line has
-# to be /bin/sh, because on GuixSD systems that is the only program that
-# has a fixed file name.  The second line is essential for perl and is
-# also useful for editing this file in Emacs.  The next two lines below
-# are valid code in both sh and perl.  When executed by sh, they re-execute
-# the script through the perl program found in $PATH.  The '-x' option
-# is essential as well; without it, perl would re-execute the script
-# through /bin/sh.  When executed by  perl, the next two lines are a no-op.
-eval 'exec perl -wSx "$0" "$@"'
-     if 0;
-
-my $VERSION = '2018-03-07 03:47'; # UTC
-# The definition above must lie within the first 8 lines in order
-# for the Emacs time-stamp write hook (at end) to update it.
-# If you change this file with Emacs, please let the write hook
-# do its job.  Otherwise, update this string manually.
-
-use strict;
-use warnings;
-use Getopt::Long;
-
-(my $ME = $0) =~ s|.*/||;
-
-# use File::Coda; # https://meyering.net/code/Coda/
-END {
-  defined fileno STDOUT or return;
-  close STDOUT and return;
-  warn "$ME: failed to close standard output: $!\n";
-  $? ||= 1;
-}
-
-sub usage ($)
-{
-  my ($exit_code) = @_;
-  my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR);
-  if ($exit_code != 0)
-    {
-      print $STREAM "Try '$ME --help' for more information.\n";
-    }
-  else
-    {
-      print $STREAM <<EOF;
-Usage: $ME [OPTIONS] FILE...
-
-Detect any instance in FILE of a useless "if" test before a free call, e.g.,
-"if (p) free (p);".  Any such test may be safely removed without affecting
-the semantics of the C code in FILE.  Use --name=FOO --name=BAR to also
-detect free-like functions named FOO and BAR.
-
-OPTIONS:
-
-   --list       print only the name of each matching FILE (\\0-terminated)
-   --name=N     add name N to the list of \'free\'-like functions to detect;
-                  may be repeated
-
-   --help       display this help and exit
-   --version    output version information and exit
-
-Exit status:
-
-  0   one or more matches
-  1   no match
-  2   an error
-
-EXAMPLE:
-
-For example, this command prints all removable "if" tests before "free"
-and "kfree" calls in the linux kernel sources:
-
-    git ls-files -z |xargs -0 $ME --name=kfree
-
-EOF
-    }
-  exit $exit_code;
-}
-
-sub is_NULL ($)
-{
-  my ($expr) = @_;
-  return ($expr eq 'NULL' || $expr eq '0');
-}
-
-{
-  sub EXIT_MATCH {0}
-  sub EXIT_NO_MATCH {1}
-  sub EXIT_ERROR {2}
-  my $err = EXIT_NO_MATCH;
-
-  my $list;
-  my @name = qw(free);
-  GetOptions
-    (
-     help => sub { usage 0 },
-     version => sub { print "$ME version $VERSION\n"; exit },
-     list => \$list,
-     'name=s@' => \@name,
-    ) or usage 1;
-
-  # Make sure we have the right number of non-option arguments.
-  # Always tell the user why we fail.
-  @ARGV < 1
-    and (warn "$ME: missing FILE argument\n"), usage EXIT_ERROR;
-
-  my $or = join '|', @name;
-  my $regexp = qr/(?:$or)/;
-
-  # Set the input record separator.
-  # Note: this makes it impractical to print line numbers.
-  $/ = '"';
-
-  my $found_match = 0;
- FILE:
-  foreach my $file (@ARGV)
-    {
-      open FH, '<', $file
-        or (warn "$ME: can't open '$file' for reading: $!\n"),
-          $err = EXIT_ERROR, next;
-      while (defined (my $line = <FH>))
-        {
-          # Skip non-matching lines early to save time
-          $line =~ /\bif\b/
-            or next;
-          while ($line =~
-              /\b(if\s*\(\s*([^)]+?)(?:\s*!=\s*([^)]+?))?\s*\)
-              #  1          2                  3
-               (?:   \s*$regexp\s*\((?:\s*\([^)]+\))?\s*([^)]+)\)\s*;|
-                \s*\{\s*$regexp\s*\((?:\s*\([^)]+\))?\s*([^)]+)\)\s*;\s*\}))/sxg)
-            {
-              my $all = $1;
-              my ($lhs, $rhs) = ($2, $3);
-              my ($free_opnd, $braced_free_opnd) = ($4, $5);
-              my $non_NULL;
-              if (!defined $rhs) { $non_NULL = $lhs }
-              elsif (is_NULL $rhs) { $non_NULL = $lhs }
-              elsif (is_NULL $lhs) { $non_NULL = $rhs }
-              else { next }
-
-              # Compare the non-NULL part of the "if" expression and the
-              # free'd expression, without regard to white space.
-              $non_NULL =~ tr/ \t//d;
-              my $e2 = defined $free_opnd ? $free_opnd : $braced_free_opnd;
-              $e2 =~ tr/ \t//d;
-              if ($non_NULL eq $e2)
-                {
-                  $found_match = 1;
-                  $list
-                    and (print "$file\0"), next FILE;
-                  print "$file: $all\n";
-                }
-            }
-        }
-    }
-  continue
-    {
-      close FH;
-    }
-
-  $found_match && $err == EXIT_NO_MATCH
-    and $err = EXIT_MATCH;
-
-  exit $err;
-}
-
-my $foo = <<'EOF';
-# The above is to *find* them.
-# This adjusts them, removing the unnecessary "if (p)" part.
-
-# FIXME: do something like this as an option (doesn't do braces):
-free=xfree
-git grep -l -z "$free *(" \
-  | xargs -0 useless-if-before-free -l --name="$free" \
-  | xargs -0 perl -0x3b -pi -e \
-   's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*(?:0|NULL))?\s*\)\s+('"$free"'\s*\((?:\s*\([^)]+\))?\s*\1\s*\)\s*;)/$2/s'
-
-# Use the following to remove redundant uses of kfree inside braces.
-# Note that -0777 puts perl in slurp-whole-file mode;
-# but we have plenty of memory, these days...
-free=kfree
-git grep -l -z "$free *(" \
-  | xargs -0 useless-if-before-free -l --name="$free" \
-  | xargs -0 perl -0777 -pi -e \
-     's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*(?:0|NULL))?\s*\)\s*\{\s*('"$free"'\s*\((?:\s*\([^)]+\))?\s*\1\s*\);)\s*\}[^\n]*$/$2/gms'
-
-Be careful that the result of the above transformation is valid.
-If the matched string is followed by "else", then obviously, it won't be.
-
-When modifying files, refuse to process anything other than a regular file.
-EOF
-
-## Local Variables:
-## mode: perl
-## indent-tabs-mode: nil
-## eval: (add-hook 'before-save-hook 'time-stamp)
-## time-stamp-line-limit: 50
-## time-stamp-start: "my $VERSION = '"
-## time-stamp-format: "%:y-%02m-%02d %02H:%02M"
-## time-stamp-time-zone: "UTC0"
-## time-stamp-end: "'; # UTC"
-## End:
--- a/build-aux/vc-list-files
+++ b/build-aux/vc-list-files
@@ -1,113 +0,0 @@
-#!/bin/sh
-# List version-controlled file names.
-
-# Print a version string.
-scriptversion=2018-03-07.03; # UTC
-
-# Copyright (C) 2006-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-
-# List the specified version-controlled files.
-# With no argument, list them all.  With a single DIRECTORY argument,
-# list the version-controlled files in that directory.
-
-# If there's an argument, it must be a single, "."-relative directory name.
-# cvsu is part of the cvsutils package: http://www.red-bean.com/cvsutils/
-
-postprocess=
-case $1 in
-  --help) cat <<EOF
-Usage: $0 [-C SRCDIR] [DIR...]
-
-Output a list of version-controlled files in DIR (default .), relative to
-SRCDIR (default .).  SRCDIR must be the top directory of a checkout.
-
-Options:
-  --help     print this help, then exit
-  --version  print version number, then exit
-  -C SRCDIR  change directory to SRCDIR before generating list
-
-Report bugs and patches to <bug-gnulib@gnu.org>.
-EOF
-    exit ;;
-
-  --version)
-    year=`echo "$scriptversion" | sed 's/[^0-9].*//'`
-    cat <<EOF
-vc-list-files $scriptversion
-Copyright (C) $year Free Software Foundation, Inc,
-License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>
-This is free software: you are free to change and redistribute it.
-There is NO WARRANTY, to the extent permitted by law.
-EOF
-    exit ;;
-
-  -C)
-    test "$2" = . || postprocess="| sed 's|^|$2/|'"
-    cd "$2" || exit 1
-    shift; shift ;;
-esac
-
-test $# = 0 && set .
-
-for dir
-do
-  if test -d .git || test -f .git; then
-    test "x$dir" = x. \
-      && dir= sed_esc= \
-      || { dir="$dir/"; sed_esc=`echo "$dir"|env sed 's,\([\\/]\),\\\\\1,g'`; }
-    # Ignore git symlinks - either they point into the tree, in which case
-    # we don't need to visit the target twice, or they point somewhere
-    # else (often into a submodule), in which case the content does not
-    # belong to this package.
-    eval exec git ls-tree -r 'HEAD:"$dir"' \
-      \| sed -n '"s/^100[^	]*./$sed_esc/p"' $postprocess
-  elif test -d .hg; then
-    eval exec hg locate '"$dir/*"' $postprocess
-  elif test -d .bzr; then
-    test "$postprocess" = '' && postprocess="| sed 's|^\./||'"
-    eval exec bzr ls -R --versioned '"$dir"' $postprocess
-  elif test -d CVS; then
-    test "$postprocess" = '' && postprocess="| sed 's|^\./||'"
-    if test -x build-aux/cvsu; then
-      eval build-aux/cvsu --find --types=AFGM '"$dir"' $postprocess
-    elif (cvsu --help) >/dev/null 2>&1; then
-      eval cvsu --find --types=AFGM '"$dir"' $postprocess
-    else
-      eval awk -F/ \''{			\
-          if (!$1 && $3 !~ /^-/) {	\
-            f=FILENAME;			\
-            if (f ~ /CVS\/Entries$/)	\
-              f = substr(f, 1, length(f)-11); \
-            print f $2;			\
-          }}'\''				\
-        `find "$dir" -name Entries -print` /dev/null' $postprocess
-    fi
-  elif test -d .svn; then
-    eval exec svn list -R '"$dir"' $postprocess
-  else
-    echo "$0: Failed to determine type of version control used in `pwd`" 1>&2
-    exit 1
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:
--- a/cfg.mk
+++ b/cfg.mk
@@ -0,0 +1,817 @@
+# Customize Makefile.maint.                           -*- makefile -*-
+# Copyright (C) 2008-2012 Red Hat, Inc.
+# Copyright (C) 2003-2008 Free Software Foundation, Inc.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Use alpha.gnu.org for alpha and beta releases.
+# Use ftp.gnu.org for major releases.
+gnu_ftp_host-alpha = alpha.gnu.org
+gnu_ftp_host-beta = alpha.gnu.org
+gnu_ftp_host-major = ftp.gnu.org
+gnu_rel_host = $(gnu_ftp_host-$(RELEASE_TYPE))
+
+url_dir_list = \
+  ftp://$(gnu_rel_host)/gnu/coreutils
+
+# We use .gnulib, not gnulib.
+gnulib_dir = $(srcdir)/.gnulib
+
+# List of additional files that we want to pick up in our POTFILES.in
+# This is all gnulib files, as well as generated files for RPC code.
+generated_files = \
+  $(srcdir)/daemon/*_dispatch.h \
+  $(srcdir)/src/remote/*_client_bodies.h \
+  $(srcdir)/src/remote/*_protocol.[ch] \
+  $(srcdir)/gnulib/lib/*.[ch]
+
+# We haven't converted all scripts to using gnulib's init.sh yet.
+_test_script_regex = \<\(init\|test-lib\)\.sh\>
+
+# Tests not to run as part of "make distcheck".
+local-checks-to-skip =			\
+  changelog-check			\
+  check-AUTHORS				\
+  makefile-check			\
+  makefile_path_separator_check		\
+  patch-check				\
+  sc_GPL_version			\
+  sc_always_defined_macros		\
+  sc_cast_of_alloca_return_value	\
+  sc_cross_check_PATH_usage_in_tests	\
+  sc_dd_max_sym_length			\
+  sc_error_exit_success			\
+  sc_file_system			\
+  sc_immutable_NEWS			\
+  sc_makefile_path_separator_check	\
+  sc_obsolete_symbols			\
+  sc_prohibit_S_IS_definition		\
+  sc_prohibit_atoi_atof			\
+  sc_prohibit_hash_without_use		\
+  sc_prohibit_jm_in_m4			\
+  sc_prohibit_quote_without_use		\
+  sc_prohibit_quotearg_without_use	\
+  sc_prohibit_stat_st_blocks		\
+  sc_root_tests				\
+  sc_space_tab				\
+  sc_sun_os_names			\
+  sc_system_h_headers			\
+  sc_texinfo_acronym			\
+  sc_tight_scope			\
+  sc_two_space_separator_in_usage	\
+  sc_error_message_uppercase		\
+  sc_program_name			\
+  sc_require_test_exit_idiom		\
+  sc_makefile_check			\
+  sc_useless_cpp_parens
+
+# Files that should never cause syntax check failures.
+VC_LIST_ALWAYS_EXCLUDE_REGEX = \
+  (^(HACKING|docs/(news\.html\.in|.*\.patch))|\.po)$$
+
+# Functions like free() that are no-ops on NULL arguments.
+useless_free_options =				\
+  --name=VIR_FREE				\
+  --name=qemuCapsFree				\
+  --name=qemuMigrationCookieFree                \
+  --name=qemuMigrationCookieGraphicsFree        \
+  --name=sexpr_free				\
+  --name=virBandwidthDefFree			\
+  --name=virBitmapFree                          \
+  --name=virCPUDefFree				\
+  --name=virCapabilitiesFree			\
+  --name=virCapabilitiesFreeGuest		\
+  --name=virCapabilitiesFreeGuestDomain		\
+  --name=virCapabilitiesFreeGuestFeature	\
+  --name=virCapabilitiesFreeGuestMachine	\
+  --name=virCapabilitiesFreeHostNUMACell	\
+  --name=virCapabilitiesFreeMachines		\
+  --name=virCgroupFree				\
+  --name=virCommandFree				\
+  --name=virConfFreeList			\
+  --name=virConfFreeValue			\
+  --name=virDomainActualNetDefFree		\
+  --name=virDomainChrDefFree			\
+  --name=virDomainChrSourceDefFree		\
+  --name=virDomainControllerDefFree		\
+  --name=virDomainDefFree			\
+  --name=virDomainDeviceDefFree			\
+  --name=virDomainDiskDefFree			\
+  --name=virDomainEventCallbackListFree		\
+  --name=virDomainEventFree			\
+  --name=virDomainEventQueueFree		\
+  --name=virDomainEventStateFree		\
+  --name=virDomainFSDefFree			\
+  --name=virDomainGraphicsDefFree		\
+  --name=virDomainHostdevDefFree		\
+  --name=virDomainInputDefFree			\
+  --name=virDomainNetDefFree			\
+  --name=virDomainObjFree			\
+  --name=virDomainSmartcardDefFree		\
+  --name=virDomainSnapshotDefFree		\
+  --name=virDomainSnapshotObjFree		\
+  --name=virDomainSoundDefFree			\
+  --name=virDomainVideoDefFree			\
+  --name=virDomainWatchdogDefFree		\
+  --name=virFileDirectFdFree			\
+  --name=virHashFree				\
+  --name=virInterfaceDefFree			\
+  --name=virInterfaceIpDefFree			\
+  --name=virInterfaceObjFree			\
+  --name=virInterfaceProtocolDefFree		\
+  --name=virJSONValueFree			\
+  --name=virLastErrFreeData			\
+  --name=virNetMessageFree                      \
+  --name=virNetClientFree                       \
+  --name=virNetClientProgramFree                \
+  --name=virNetClientStreamFree                 \
+  --name=virNetServerFree                       \
+  --name=virNetServerClientFree                 \
+  --name=virNetServerMDNSFree                   \
+  --name=virNetServerMDNSEntryFree              \
+  --name=virNetServerMDNSGroupFree              \
+  --name=virNetServerProgramFree                \
+  --name=virNetServerServiceFree                \
+  --name=virNetSocketFree                       \
+  --name=virNetSASLContextFree                  \
+  --name=virNetSASLSessionFree                  \
+  --name=virNetTLSSessionFree                   \
+  --name=virNWFilterDefFree			\
+  --name=virNWFilterEntryFree			\
+  --name=virNWFilterHashTableFree		\
+  --name=virNWFilterIPAddrLearnReqFree		\
+  --name=virNWFilterIncludeDefFree		\
+  --name=virNWFilterObjFree			\
+  --name=virNWFilterRuleDefFree			\
+  --name=virNWFilterRuleInstFree		\
+  --name=virNetworkDefFree			\
+  --name=virNetworkObjFree			\
+  --name=virNodeDeviceDefFree			\
+  --name=virNodeDeviceObjFree			\
+  --name=virSecretDefFree			\
+  --name=virStorageEncryptionFree		\
+  --name=virStorageEncryptionSecretFree		\
+  --name=virStorageFileFreeMetadata		\
+  --name=virStoragePoolDefFree			\
+  --name=virStoragePoolObjFree			\
+  --name=virStoragePoolSourceFree		\
+  --name=virStorageVolDefFree			\
+  --name=virThreadPoolFree			\
+  --name=xmlBufferFree				\
+  --name=xmlFree				\
+  --name=xmlFreeDoc				\
+  --name=xmlFreeNode				\
+  --name=xmlXPathFreeContext			\
+  --name=xmlXPathFreeObject
+
+# The following template was generated by this command:
+# make ID && aid free|grep '^vi'|sed 's/ .*//;s/^/#   /'
+# N virBufferFreeAndReset
+# y virCPUDefFree
+# y virCapabilitiesFree
+# y virCapabilitiesFreeGuest
+# y virCapabilitiesFreeGuestDomain
+# y virCapabilitiesFreeGuestFeature
+# y virCapabilitiesFreeGuestMachine
+# y virCapabilitiesFreeHostNUMACell
+# y virCapabilitiesFreeMachines
+# N virCapabilitiesFreeNUMAInfo FIXME
+# y virCgroupFree
+# N virConfFree               (diagnoses the "error")
+# y virConfFreeList
+# y virConfFreeValue
+# y virDomainChrDefFree
+# y virDomainControllerDefFree
+# y virDomainDefFree
+# y virDomainDeviceDefFree
+# y virDomainDiskDefFree
+# y virDomainEventCallbackListFree
+# y virDomainEventFree
+# y virDomainEventQueueFree
+# y virDomainFSDefFree
+# n virDomainFree
+# n virDomainFreeName (can't fix -- returns int)
+# y virDomainGraphicsDefFree
+# y virDomainHostdevDefFree
+# y virDomainInputDefFree
+# y virDomainNetDefFree
+# y virDomainObjFree
+# y virDomainSnapshotDefFree
+# n virDomainSnapshotFree (returns int)
+# n virDomainSnapshotFreeName (returns int)
+# y virDomainSnapshotObjFree
+# y virDomainSoundDefFree
+# y virDomainVideoDefFree
+# y virDomainWatchdogDefFree
+# n virDrvNodeGetCellsFreeMemory (returns int)
+# n virDrvNodeGetFreeMemory (returns long long)
+# n virFree - dereferences param
+# n virFreeError
+# n virHashFree (takes 2 args)
+# y virInterfaceDefFree
+# n virInterfaceFree (returns int)
+# n virInterfaceFreeName
+# y virInterfaceIpDefFree
+# y virInterfaceObjFree
+# n virInterfaceObjListFree
+# y virInterfaceProtocolDefFree
+# y virJSONValueFree
+# y virLastErrFreeData
+# y virNWFilterDefFree
+# y virNWFilterEntryFree
+# n virNWFilterFree (returns int)
+# y virNWFilterHashTableFree
+# y virNWFilterIPAddrLearnReqFree
+# y virNWFilterIncludeDefFree
+# n virNWFilterFreeName (returns int)
+# y virNWFilterObjFree
+# n virNWFilterObjListFree FIXME
+# y virNWFilterRuleDefFree
+# n virNWFilterRuleFreeInstanceData (typedef)
+# y virNWFilterRuleInstFree
+# y virNetworkDefFree
+# n virNetworkFree (returns int)
+# n virNetworkFreeName (returns int)
+# y virNetworkObjFree
+# n virNetworkObjListFree FIXME
+# n virNodeDevCapsDefFree FIXME
+# y virNodeDeviceDefFree
+# n virNodeDeviceFree (returns int)
+# y virNodeDeviceObjFree
+# n virNodeDeviceObjListFree FIXME
+# n virNodeGetCellsFreeMemory (returns int)
+# n virNodeGetFreeMemory (returns non-void)
+# y virSecretDefFree
+# n virSecretFree (returns non-void)
+# n virSecretFreeName (2 args)
+# n virSecurityLabelDefFree FIXME
+# n virStorageBackendDiskMakeFreeExtent (returns non-void)
+# y virStorageEncryptionFree
+# y virStorageEncryptionSecretFree
+# n virStorageFreeType (enum)
+# y virStoragePoolDefFree
+# n virStoragePoolFree (returns non-void)
+# n virStoragePoolFreeName (returns non-void)
+# y virStoragePoolObjFree
+# n virStoragePoolObjListFree FIXME
+# y virStoragePoolSourceFree
+# y virStorageVolDefFree
+# n virStorageVolFree (returns non-void)
+# n virStorageVolFreeName (returns non-void)
+# n virStreamFree
+
+# Avoid uses of write(2).  Either switch to streams (fwrite), or use
+# the safewrite wrapper.
+sc_avoid_write:
+	@prohibit='\<write *\('						\
+	in_vc_files='\.c$$'						\
+	halt='consider using safewrite instead of write'		\
+	  $(_sc_search_regexp)
+
+# In debug statements, print flags as bitmask and mode_t as octal.
+sc_flags_debug:
+	@prohibit='\<mode=%[0-9.]*[diux]'				\
+	halt='use %o to debug mode_t values'				\
+	  $(_sc_search_regexp)
+	@prohibit='[Ff]lags=%[0-9.]*l*[diou]'				\
+	halt='use %x to debug flag values'				\
+	  $(_sc_search_regexp)
+
+# Prefer 'unsigned int flags', along with checks for unknown flags.
+# For historical reasons, we are stuck with 'unsigned long flags' in
+# migration, so check for those known 4 instances and no more in public
+# API.  Also check that no flags are marked unused, and 'unsigned' should
+# appear before any declaration of a flags variable (achieved by
+# prohibiting the word prior to the type from ending in anything other
+# than d).  The existence of long long, and of documentation about
+# flags, makes the regex in the third test slightly harder.
+sc_flags_usage:
+	@test "$$(cat $(srcdir)/include/libvirt/libvirt.h.in		\
+	    $(srcdir)/include/libvirt/virterror.h			\
+	    $(srcdir)/include/libvirt/libvirt-qemu.h			\
+	  | grep -c '\(long\|unsigned\) flags')" != 4 &&		\
+	  { echo '$(ME): new API should use "unsigned int flags"' 1>&2;	\
+	    exit 1; } || :
+	@prohibit=' flags ''ATTRIBUTE_UNUSED'				\
+	halt='flags should be checked with virCheckFlags'		\
+	  $(_sc_search_regexp)
+	@prohibit='^[^@]*([^d] (int|long long)|[^dg] long) flags[;,)]'	\
+	halt='flags should be unsigned'					\
+	  $(_sc_search_regexp)
+
+# Avoid functions that should only be called via macro counterparts.
+sc_prohibit_internal_functions:
+	@prohibit='vir(Free|AllocN?|ReallocN|File(Close|Fclose|Fdopen)) *\(' \
+	halt='use VIR_ macros instead of internal functions'		\
+	  $(_sc_search_regexp)
+
+# Avoid raw malloc and free, except in documentation comments.
+sc_prohibit_raw_allocation:
+	@prohibit='^.[^*].*\<((m|c|re)alloc|free) *\([^)]'		\
+	halt='use VIR_ macros from memory.h instead of malloc/free'	\
+	  $(_sc_search_regexp)
+
+# Avoid functions that can lead to double-close bugs.
+sc_prohibit_close:
+	@prohibit='([^>.]|^)\<[fp]?close *\('				\
+	halt='use VIR_{FORCE_}[F]CLOSE instead of [f]close'		\
+	  $(_sc_search_regexp)
+	@prohibit='\<fdopen *\('					\
+	halt='use VIR_FDOPEN instead of fdopen'				\
+	  $(_sc_search_regexp)
+
+# Prefer virCommand for all child processes.
+sc_prohibit_fork_wrappers:
+	@prohibit='= *\<(fork|popen|system) *\('			\
+	halt='use virCommand for child processes'			\
+	  $(_sc_search_regexp)
+
+# access with X_OK accepts directories, but we can't exec() those.
+# access with F_OK or R_OK is okay, though.
+sc_prohibit_access_xok:
+	@prohibit='access''(at)? *\(.*X_OK'				\
+	halt='use virFileIsExecutable instead of access''(,X_OK)'	\
+	  $(_sc_search_regexp)
+
+# Similar to the gnulib maint.mk rule for sc_prohibit_strcmp
+# Use STREQLEN or STRPREFIX rather than comparing strncmp == 0, or != 0.
+snp_ = strncmp *\(.+\)
+sc_prohibit_strncmp:
+	@prohibit='! *strncmp *\(|\<$(snp_) *[!=]=|[!=]= *$(snp_)'	\
+	exclude=':# *define STR(N?EQLEN|PREFIX)\('			\
+	halt='$(ME): use STREQLEN or STRPREFIX instead of str''ncmp'	\
+	  $(_sc_search_regexp)
+
+# Use virAsprintf rather than as'printf since *strp is undefined on error.
+sc_prohibit_asprintf:
+	@prohibit='\<v?a[s]printf\>'					\
+	halt='use virAsprintf, not as'printf				\
+	  $(_sc_search_regexp)
+
+# Prefer virSetUIDGID.
+sc_prohibit_setuid:
+	@prohibit='\<set(re)?[ug]id\> *\('				\
+	halt='use virSetUIDGID, not raw set*id'				\
+	  $(_sc_search_regexp)
+
+# Use snprintf rather than s'printf, even if buffer is provably large enough,
+# since gnulib has more guarantees for snprintf portability
+sc_prohibit_sprintf:
+	@prohibit='\<[s]printf\>'					\
+	halt='use snprintf, not s'printf				\
+	  $(_sc_search_regexp)
+
+sc_prohibit_strncpy:
+	@prohibit='strncpy *\('						\
+	halt='use virStrncpy, not strncpy'				\
+	  $(_sc_search_regexp)
+
+sc_prohibit_readlink:
+	@prohibit='readlink *\('					\
+	halt='use virFileResolveLink, not readlink'			\
+	  $(_sc_search_regexp)
+
+sc_prohibit_gethostname:
+	@prohibit='gethostname *\('					\
+	halt='use virGetHostname, not gethostname'			\
+	  $(_sc_search_regexp)
+
+sc_prohibit_gettext_noop:
+	@prohibit='gettext_noop *\('					\
+	halt='use N_, not gettext_noop'					\
+	  $(_sc_search_regexp)
+
+sc_prohibit_VIR_ERR_NO_MEMORY:
+	@prohibit='\<V''IR_ERR_NO_MEMORY\>'				\
+	halt='use virReportOOMError, not V'IR_ERR_NO_MEMORY		\
+	  $(_sc_search_regexp)
+
+# Use a subshell for each function, to give the optimal warning message.
+include $(srcdir)/Makefile.nonreentrant
+sc_prohibit_nonreentrant:
+	@fail=0 ; \
+	for i in $(NON_REENTRANT) ; \
+	do \
+	    (prohibit="\\<$$i *\\("					\
+	     halt="use $${i}_r, not $$i"				\
+	     $(_sc_search_regexp)					\
+	    ) || fail=1;						\
+	done ; \
+	exit $$fail
+
+# Prohibit the inclusion of <ctype.h>.
+sc_prohibit_ctype_h:
+	@prohibit='^# *include  *<ctype\.h>'				\
+	halt="don't use ctype.h; instead, use c-ctype.h"		\
+	  $(_sc_search_regexp)
+
+# Insist on correct types for [pug]id.
+sc_correct_id_types:
+	@prohibit='\<(int|long) *[pug]id\>'				\
+	halt="use pid_t for pid, uid_t for uid, gid_t for gid"		\
+	  $(_sc_search_regexp)
+
+# Forbid sizeof foo or sizeof (foo), require sizeof(foo)
+sc_size_of_brackets:
+	@prohibit='sizeof\s'						\
+	halt='use sizeof(foo), not sizeof (foo) or sizeof foo'		\
+	  $(_sc_search_regexp)
+
+# Ensure that no C source file, docs, or rng schema uses TABs for
+# indentation.  Also match *.h.in files, to get libvirt.h.in.  Exclude
+# files in gnulib, since they're imported.
+space_indent_files=(\.(rng|s?[ch](\.in)?|html.in|py|syms)|(daemon|tools)/.*\.in)
+sc_TAB_in_indentation:
+	@prohibit='^ *	'						\
+	in_vc_files='$(space_indent_files)$$'				\
+	halt='indent with space, not TAB, in C, sh, html, py, syms and RNG schemas' \
+	  $(_sc_search_regexp)
+
+ctype_re = isalnum|isalpha|isascii|isblank|iscntrl|isdigit|isgraph|islower\
+|isprint|ispunct|isspace|isupper|isxdigit|tolower|toupper
+
+sc_avoid_ctype_macros:
+	@prohibit='\b($(ctype_re)) *\('					\
+	halt="don't use ctype macros (use c-ctype.h)"			\
+	  $(_sc_search_regexp)
+
+sc_avoid_strcase:
+	@prohibit='\bstrn?case(cmp|str) *\('				\
+	halt="don't use raw strcase functions (use c-strcase instead)"	\
+	  $(_sc_search_regexp)
+
+sc_prohibit_virBufferAdd_with_string_literal:
+	@prohibit='\<virBufferAdd *\([^,]+, *"[^"]'			\
+	halt='use virBufferAddLit, not virBufferAdd, with a string literal' \
+	  $(_sc_search_regexp)
+
+# Not only do they fail to deal well with ipv6, but the gethostby*
+# functions are also not thread-safe.
+sc_prohibit_gethostby:
+	@prohibit='\<gethostby(addr|name2?) *\('			\
+	halt='use getaddrinfo, not gethostby*'				\
+	  $(_sc_search_regexp)
+
+# raw xmlGetProp requires some nasty casts
+sc_prohibit_xmlGetProp:
+	@prohibit='\<xmlGetProp *\('					\
+	halt='use virXMLPropString, not xmlGetProp'			\
+	  $(_sc_search_regexp)
+
+# xml(ParseURI|SaveUri) doesn't handle IPv6 URIs well
+sc_prohibit_xmlURI:
+	@prohibit='\<xml(ParseURI|SaveUri) *\('				\
+	halt='use virURI(Parse|Format), not xml(ParseURI|SaveUri)'	\
+	  $(_sc_search_regexp)
+
+# we don't want old old-style return with parentheses around argument
+sc_prohibit_return_as_function:
+	@prohibit='\<return *\(([^()]*(\([^()]*\)[^()]*)*)\) *;'    \
+	halt='avoid extra () with return statements'                \
+	  $(_sc_search_regexp)
+
+# ATTRIBUTE_UNUSED should only be applied in implementations, not
+# header declarations
+sc_avoid_attribute_unused_in_header:
+	@prohibit='^[^#]*ATTRIBUTE_UNUSED([^:]|$$)'			\
+	in_vc_files='\.h$$'						\
+	halt='use ATTRIBUTE_UNUSED in .c rather than .h files'		\
+	  $(_sc_search_regexp)
+
+# Many of the function names below came from this filter:
+# git grep -B2 '\<_('|grep -E '\.c- *[[:alpha:]_][[:alnum:]_]* ?\(.*[,;]$' \
+# |sed 's/.*\.c-  *//'|perl -pe 's/ ?\(.*//'|sort -u \
+# |grep -vE '^(qsort|if|close|assert|fputc|free|N_|vir.*GetName|.*Unlock|virNodeListDevices|virHashRemoveEntry|freeaddrinfo|.*[fF]ree|xdrmem_create|xmlXPathFreeObject|virUUIDFormat|openvzSetProgramSentinal|polkit_action_unref)$'
+
+msg_gen_function =
+msg_gen_function += ESX_ERROR
+msg_gen_function += ESX_VI_ERROR
+msg_gen_function += HYPERV_ERROR
+msg_gen_function += PHYP_ERROR
+msg_gen_function += VIR_ERROR
+msg_gen_function += VMX_ERROR
+msg_gen_function += XENXS_ERROR
+msg_gen_function += eventReportError
+msg_gen_function += ifaceError
+msg_gen_function += interfaceReportError
+msg_gen_function += iptablesError
+msg_gen_function += lxcError
+msg_gen_function += libxlError
+msg_gen_function += macvtapError
+msg_gen_function += networkReportError
+msg_gen_function += nodeReportError
+msg_gen_function += openvzError
+msg_gen_function += pciReportError
+msg_gen_function += qemuReportError
+msg_gen_function += qemudDispatchClientFailure
+msg_gen_function += regerror
+msg_gen_function += remoteError
+msg_gen_function += remoteDispatchFormatError
+msg_gen_function += statsError
+msg_gen_function += streamsReportError
+msg_gen_function += usbReportError
+msg_gen_function += umlReportError
+msg_gen_function += vah_error
+msg_gen_function += vah_warning
+msg_gen_function += vboxError
+msg_gen_function += virCommandError
+msg_gen_function += virConfError
+msg_gen_function += virCPUReportError
+msg_gen_function += virEventError
+msg_gen_function += virDomainReportError
+msg_gen_function += virGenericReportError
+msg_gen_function += virHashError
+msg_gen_function += virHookReportError
+msg_gen_function += virInterfaceReportError
+msg_gen_function += virJSONError
+msg_gen_function += virLibConnError
+msg_gen_function += virLibDomainError
+msg_gen_function += virLibDomainSnapshotError
+msg_gen_function += virLibInterfaceError
+msg_gen_function += virLibNetworkError
+msg_gen_function += virLibNodeDeviceError
+msg_gen_function += virLibNWFilterError
+msg_gen_function += virLibSecretError
+msg_gen_function += virLibStoragePoolError
+msg_gen_function += virLibStorageVolError
+msg_gen_function += virNetworkReportError
+msg_gen_function += virNodeDeviceReportError
+msg_gen_function += virNWFilterReportError
+msg_gen_function += virRaiseError
+msg_gen_function += virReportErrorHelper
+msg_gen_function += virReportSystemError
+msg_gen_function += virSecretReportError
+msg_gen_function += virSecurityReportError
+msg_gen_function += virSexprError
+msg_gen_function += virSmbiosReportError
+msg_gen_function += virSocketError
+msg_gen_function += virStatsError
+msg_gen_function += virStorageReportError
+msg_gen_function += virUtilError
+msg_gen_function += virXMLError
+msg_gen_function += virXenInotifyError
+msg_gen_function += virXenStoreError
+msg_gen_function += virXendError
+msg_gen_function += vmwareError
+msg_gen_function += xenapiSessionErrorHandler
+msg_gen_function += xenUnifiedError
+msg_gen_function += xenXMError
+
+# Uncomment the following and run "make syntax-check" to see diagnostics
+# that are not yet marked for translation, but that need to be rewritten
+# so that they are translatable.
+# msg_gen_function += fprintf
+# msg_gen_function += testError
+# msg_gen_function += virXenError
+# msg_gen_function += vshPrint
+# msg_gen_function += vshError
+
+func_or := $(shell printf '$(msg_gen_function)'|tr -s '[[:space:]]' '|')
+func_re := ($(func_or))
+
+# Look for diagnostics that aren't marked for translation.
+# This won't find any for which error's format string is on a separate line.
+# The sed filters eliminate false-positives like these:
+#    _("...: "
+#    "%s", _("no storage vol w..."
+sc_libvirt_unmarked_diagnostics:
+	@prohibit='\<$(func_re) *\([^"]*"[^"]*[a-z]{3}'			\
+	exclude='_\('							\
+	halt='$(ME): found unmarked diagnostic(s)'			\
+	  $(_sc_search_regexp)
+	@{ grep     -nE '\<$(func_re) *\(.*;$$' $$($(VC_LIST_EXCEPT));   \
+	   grep -A1 -nE '\<$(func_re) *\(.*,$$' $$($(VC_LIST_EXCEPT)); } \
+	   | sed 's/_("[^"][^"]*"//;s/[	 ]"%s"//'			\
+	   | grep '[	 ]"' &&						\
+	  { echo '$(ME): found unmarked diagnostic(s)' 1>&2;		\
+	    exit 1; } || :
+
+# Like the above, but prohibit a newline at the end of a diagnostic.
+# This is subject to false positives partly because it naively looks for
+# `\n"', which may not be the end of the string, and also because it takes
+# two lines of context (the -A2) after the line with the function name.
+# FIXME: this rule might benefit from a separate function list, in case
+# there are functions to which this one applies but that do not get marked
+# diagnostics.
+sc_prohibit_newline_at_end_of_diagnostic:
+	@grep -A2 -nE							\
+	    '\<$(func_re) *\(' $$($(VC_LIST_EXCEPT))			\
+	    | grep '\\n"'						\
+	  && { echo '$(ME): newline at end of message(s)' 1>&2;		\
+	    exit 1; } || :
+
+# Enforce recommended preprocessor indentation style.
+sc_preprocessor_indentation:
+	@if cppi --version >/dev/null 2>&1; then			\
+	  $(VC_LIST_EXCEPT) | grep '\.[ch]$$' | xargs cppi -a -c	\
+	    || { echo '$(ME): incorrect preprocessor indentation' 1>&2;	\
+		exit 1; };						\
+	else								\
+	  echo '$(ME): skipping test $@: cppi not installed' 1>&2;	\
+	fi
+
+sc_copyright_format:
+	@require='Copyright .*Red 'Hat', Inc\.'				\
+	containing='Copyright .*Red 'Hat				\
+	halt='Red Hat copyright is missing Inc.'			\
+	  $(_sc_search_regexp)
+	@prohibit='Copyright [^(].*Red 'Hat				\
+	halt='consistently use (C) in Red Hat copyright'		\
+	  $(_sc_search_regexp)
+	@prohibit='\<Red''Hat\>'					\
+	halt='spell Red Hat as two words'				\
+	  $(_sc_search_regexp)
+
+# Some functions/macros produce messages intended solely for developers
+# and maintainers.  Do not mark them for translation.
+sc_prohibit_gettext_markup:
+	@prohibit='\<VIR_(WARN|INFO|DEBUG) *\(_\('			\
+	halt='do not mark these strings for translation'		\
+	  $(_sc_search_regexp)
+
+# Our code is divided into modular subdirectories for a reason, and
+# lower-level code must not include higher-level headers.
+cross_dirs=$(patsubst $(srcdir)/src/%.,%,$(wildcard $(srcdir)/src/*/.))
+cross_dirs_re=($(subst / ,/|,$(cross_dirs)))
+sc_prohibit_cross_inclusion:
+	@for dir in $(cross_dirs); do					\
+	  case $$dir in							\
+	    util/) safe="util";;					\
+	    cpu/ | locking/ | network/ | rpc/ | security/)		\
+	      safe="($$dir|util|conf)";;				\
+	    xenapi/ | xenxs/ ) safe="($$dir|util|conf|xen)";;		\
+	    *) safe="($$dir|util|conf|cpu|network|locking|rpc|security)";; \
+	  esac;								\
+	  in_vc_files="^src/$$dir"					\
+	  prohibit='^# *include .$(cross_dirs_re)'			\
+	  exclude="# *include .$$safe"					\
+	  halt='unsafe cross-directory include'				\
+	    $(_sc_search_regexp)					\
+	done
+
+# When converting an enum to a string, make sure that we track any new
+# elements added to the enum by using a _LAST marker.
+sc_require_enum_last_marker:
+	@grep -A1 -nE '^[^#]*VIR_ENUM_IMPL *\(' $$($(VC_LIST_EXCEPT))	\
+	   | sed -ne '/VIR_ENUM_IMPL[^,]*,$$/N'				\
+	     -e '/VIR_ENUM_IMPL[^,]*,[^,]*[^_,][^L,][^A,][^S,][^T,],/p'	\
+	     -e '/VIR_ENUM_IMPL[^,]*,[^,]\{0,4\},/p'			\
+	   | grep . &&							\
+	  { echo '$(ME): enum impl needs to use _LAST marker' 1>&2;	\
+	    exit 1; } || :
+
+# We don't use this feature of maint.mk.
+prev_version_file = /dev/null
+
+ifeq (0,$(MAKELEVEL))
+  _curr_status = .git-module-status
+  # The sed filter accommodates those who check out on a commit from which
+  # no tag is reachable.  In that case, git submodule status prints a "-"
+  # in column 1 and does not print a "git describe"-style string after the
+  # submodule name.  Contrast these:
+  # -b653eda3ac4864de205419d9f41eec267cb89eeb .gnulib
+  #  b653eda3ac4864de205419d9f41eec267cb89eeb .gnulib (v0.0-2286-gb653eda)
+  # $ cat .git-module-status
+  # b653eda3ac4864de205419d9f41eec267cb89eeb
+  _submodule_hash = sed 's/^[ +-]//;s/ .*//'
+  _update_required := $(shell						\
+      cd '$(srcdir)';							\
+      test -d .git || { echo 0; exit; };				\
+      test -f po/Makevars || { echo 1; exit; };				\
+      actual=$$(git submodule status | $(_submodule_hash);		\
+		git hash-object bootstrap.conf;				\
+		git ls-tree -d HEAD gnulib/local | awk '{print $$3}';	\
+		git diff .gnulib);					\
+      stamp="$$($(_submodule_hash) $(_curr_status) 2>/dev/null)";	\
+      test "$$stamp" = "$$actual"; echo $$?)
+  _clean_requested = $(filter %clean,$(MAKECMDGOALS))
+  ifeq (1,$(_update_required)$(_clean_requested))
+    $(info INFO: gnulib update required; running ./autogen.sh first)
+Makefile: _autogen
+  endif
+endif
+
+# Give credit where due:
+# Ensure that each commit author email address (possibly mapped via
+# git log's .mailmap) appears in our AUTHORS file.
+sc_check_author_list:
+	@fail=0;							\
+	for i in $$(git log --pretty=format:%aE%n|sort -u|grep -v '^$$'); do \
+	  sanitized=$$(echo "$$i"|LC_ALL=C sed 's/\([^a-zA-Z0-9_@-]\)/\\\1/g'); \
+	  grep -iq "<$$sanitized>" $(srcdir)/AUTHORS			\
+	    || { printf '%s\n' "$$i" >&2; fail=1; };			\
+	done;								\
+	test $$fail = 1							\
+	  && echo '$(ME): committer(s) not listed in AUTHORS' >&2;	\
+	test $$fail = 0
+
+# It is necessary to call autogen any time gnulib changes.  Autogen
+# reruns configure, then we regenerate all Makefiles at once.
+.PHONY: _autogen
+_autogen:
+	$(srcdir)/autogen.sh
+	./config.status
+
+# regenerate HACKING as part of the syntax-check
+syntax-check: $(top_srcdir)/HACKING
+
+# sc_po_check can fail if generated files are not built first
+sc_po_check: \
+		$(srcdir)/daemon/remote_dispatch.h \
+		$(srcdir)/daemon/qemu_dispatch.h \
+		$(srcdir)/src/remote/remote_client_bodies.h
+$(srcdir)/daemon/remote_dispatch.h: $(srcdir)/src/remote/remote_protocol.x
+	$(MAKE) -C daemon remote_dispatch.h
+$(srcdir)/daemon/qemu_dispatch.h: $(srcdir)/src/remote/qemu_protocol.x
+	$(MAKE) -C daemon qemu_dispatch.h
+$(srcdir)/src/remote/remote_client_bodies.h: $(srcdir)/src/remote/remote_protocol.x
+	$(MAKE) -C src remote/remote_client_bodies.h
+
+# List all syntax-check exemptions:
+exclude_file_name_regexp--sc_avoid_strcase = ^tools/virsh\.c$$
+
+_src1=libvirt|fdstream|qemu/qemu_monitor|util/(command|util)|xen/xend_internal|rpc/virnetsocket|lxc/lxc_controller
+exclude_file_name_regexp--sc_avoid_write = \
+  ^(src/($(_src1))|daemon/libvirtd|tools/console|tests/(shunload|virnettlscontext)test)\.c$$
+
+exclude_file_name_regexp--sc_bindtextdomain = ^(tests|examples)/
+
+exclude_file_name_regexp--sc_flags_usage = ^(docs/|src/util/virnetdevtap\.c$$)
+
+exclude_file_name_regexp--sc_libvirt_unmarked_diagnostics = \
+  ^src/rpc/gendispatch\.pl$$
+
+exclude_file_name_regexp--sc_po_check = ^(docs/|src/rpc/gendispatch\.pl$$)
+
+exclude_file_name_regexp--sc_prohibit_VIR_ERR_NO_MEMORY = \
+  ^(include/libvirt/virterror\.h|daemon/dispatch\.c|src/util/virterror\.c)$$
+
+exclude_file_name_regexp--sc_prohibit_access_xok = ^src/util/util\.c$$
+
+exclude_file_name_regexp--sc_prohibit_always_true_header_tests = \
+  ^python/(libvirt-(qemu-)?override|typewrappers)\.c$$
+
+exclude_file_name_regexp--sc_prohibit_asprintf = \
+  ^(bootstrap.conf$$|src/util/util\.c$$|examples/domain-events/events-c/event-test\.c$$)
+
+exclude_file_name_regexp--sc_prohibit_close = \
+  (\.p[yl]$$|^docs/|^(src/util/virfile\.c|src/libvirt\.c)$$)
+
+exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF = \
+  (^tests/qemuhelpdata/|\.(gif|ico|png|diff)$$)
+
+_src2=src/(util/command|libvirt|lxc/lxc_controller)
+exclude_file_name_regexp--sc_prohibit_fork_wrappers = \
+  (^($(_src2)|tests/testutils|daemon/libvirtd)\.c$$)
+
+exclude_file_name_regexp--sc_prohibit_gethostname = ^src/util/util\.c$$
+
+exclude_file_name_regexp--sc_prohibit_internal_functions = \
+  ^src/(util/(memory|util|virfile)\.[hc]|esx/esx_vi\.c)$$
+
+exclude_file_name_regexp--sc_prohibit_newline_at_end_of_diagnostic = \
+  ^src/rpc/gendispatch\.pl$$
+
+exclude_file_name_regexp--sc_prohibit_nonreentrant = \
+  ^((po|tests)/|docs/.*py$$|tools/(virsh|console)\.c$$)
+
+exclude_file_name_regexp--sc_prohibit_raw_allocation = \
+  ^(src/util/memory\.[ch]|examples/.*)$$
+
+exclude_file_name_regexp--sc_prohibit_readlink = ^src/util/util\.c$$
+
+exclude_file_name_regexp--sc_prohibit_setuid = ^src/util/util\.c$$
+
+exclude_file_name_regexp--sc_prohibit_sprintf = \
+  ^(docs/hacking\.html\.in)|(examples/systemtap/.*stp)|(src/dtrace2systemtap\.pl)|(src/rpc/gensystemtap\.pl)$$
+
+exclude_file_name_regexp--sc_prohibit_strncpy = \
+  ^(src/util/util|tools/virsh)\.c$$
+
+exclude_file_name_regexp--sc_prohibit_xmlGetProp = ^src/util/xml\.c$$
+
+exclude_file_name_regexp--sc_prohibit_xmlURI = ^src/util/viruri\.c$$
+
+exclude_file_name_regexp--sc_prohibit_return_as_function = \.py$$
+
+exclude_file_name_regexp--sc_require_config_h = ^examples/
+
+exclude_file_name_regexp--sc_require_config_h_first = ^examples/
+
+exclude_file_name_regexp--sc_trailing_blank = \.(fig|gif|ico|png)$$
+
+exclude_file_name_regexp--sc_unmarked_diagnostics = \
+  ^(docs/apibuild.py|tests/virt-aa-helper-test)$$
+
+exclude_file_name_regexp--sc_size_of_brackets = cfg.mk
--- a/ci/Makefile
+++ b/ci/Makefile
@@ -1,269 +0,0 @@
-# -*- makefile -*-
-# vim: filetype=make
-
-# The root directory of the libvirt.git checkout
-CI_GIT_ROOT = $(shell git rev-parse --show-toplevel)
-
-# The root directory for all CI-related contents
-CI_ROOTDIR = $(CI_GIT_ROOT)/ci
-
-# The directory holding content on the host that we will
-# expose to the container.
-CI_SCRATCHDIR = $(CI_ROOTDIR)/scratch
-
-# The directory holding the clone of the git repo that
-# we will expose to the container
-CI_HOST_SRCDIR = $(CI_SCRATCHDIR)/src
-
-# The directory holding the source inside the
-# container, i.e. where we want to expose
-# the $(CI_HOST_SRCDIR) directory from the host
-CI_CONT_SRCDIR = $(CI_USER_HOME)/libvirt
-
-# Relative directory to perform the build in. This
-# defaults to using a separate build dir, but can be
-# set to empty string for an in-source tree build.
-CI_VPATH = build
-
-# The directory holding the build output inside the
-# container.
-CI_CONT_BUILDDIR = $(CI_CONT_SRCDIR)/$(CI_VPATH)
-
-# Can be overridden with mingw{32,64}-configure if desired
-CI_CONFIGURE = $(CI_CONT_SRCDIR)/configure
-
-# Default to using all possible CPUs
-CI_SMP = $(shell getconf _NPROCESSORS_ONLN)
-
-# Any extra arguments to pass to make
-CI_MAKE_ARGS =
-
-# Any extra arguments to pass to configure
-CI_CONFIGURE_ARGS =
-
-# Script containing environment preparation steps
-CI_PREPARE_SCRIPT = $(CI_ROOTDIR)/prepare.sh
-
-# Script containing build instructions
-CI_BUILD_SCRIPT = $(CI_ROOTDIR)/build.sh
-
-# Location of the container images we're going to pull
-# Can be useful to overridde to use a locally built
-# image instead
-CI_IMAGE_PREFIX = quay.io/libvirt/buildenv-libvirt-
-
-# The default tag is ':latest' but if the container
-# repo above uses different conventions this can override it
-CI_IMAGE_TAG = :latest
-
-# We delete the virtual root after completion, set
-# to 0 if you need to keep it around for debugging
-CI_CLEAN = 1
-
-# We'll always freshly clone the virtual root each
-# time in case it was not cleaned up before. Set
-# to 1 if you want to try restarting a previously
-# preserved env
-CI_REUSE = 0
-
-# We need the container process to run with current host IDs
-# so that it can access the passed in build directory
-CI_UID = $(shell id -u)
-CI_GID = $(shell id -g)
-
-# We also need the user's login and home directory to prepare the
-# environment the way some programs expect it
-CI_USER_LOGIN = $(shell echo "$$USER")
-CI_USER_HOME = $(shell echo "$$HOME")
-
-CI_ENGINE = auto
-# Container engine we are going to use, can be overridden per make
-# invocation, if it is not we try podman and then default to docker.
-ifeq ($(CI_ENGINE),auto)
-	override CI_ENGINE = $(shell podman version >/dev/null 2>&1 && echo podman || echo docker)
-endif
-
-# IDs you run as do not need to exist in
-# the container's /etc/passwd & /etc/group files, but
-# if they do not, then libvirt's 'make check' will fail
-# many tests.
-
-# We do not directly mount /etc/{passwd,group} as Docker
-# is liable to mess with SELinux labelling which will
-# then prevent the host accessing them. And podman cannot
-# relabel the files due to it running rootless. So
-# copying them first is safer and less error-prone.
-CI_PWDB_MOUNTS = \
-	--volume $(CI_SCRATCHDIR)/group:/etc/group:ro,z \
-	--volume $(CI_SCRATCHDIR)/passwd:/etc/passwd:ro,z \
-	$(NULL)
-
-CI_HOME_MOUNTS = \
-	--volume $(CI_SCRATCHDIR)/home:$(CI_USER_HOME):z \
-	$(NULL)
-
-CI_SCRIPT_MOUNTS = \
-	--volume $(CI_SCRATCHDIR)/prepare:$(CI_USER_HOME)/prepare:z \
-	--volume $(CI_SCRATCHDIR)/build:$(CI_USER_HOME)/build:z \
-	$(NULL)
-
-# Docker containers can have very large ulimits
-# for nofiles - as much as 1048576. This makes
-# libvirt very slow at exec'ing programs.
-CI_ULIMIT_FILES = 1024
-
-ifeq ($(CI_ENGINE),podman)
-	# Podman cannot reuse host namespace when running non-root
-	# containers.  Until support for --keep-uid is added we can
-	# just create another mapping that will do that for us.
-	# Beware, that in {uid,git}map=container_id:host_id:range, the
-	# host_id does actually refer to the uid in the first mapping
-	# where 0 (root) is mapped to the current user and rest is
-	# offset.
-	#
-	# In order to set up this mapping, we need to keep all the
-	# user IDs to prevent possible errors as some images might
-	# expect UIDs up to 90000 (looking at you fedora), so we don't
-	# want the overflowuid to be used for them.  For mapping all
-	# the other users properly, some math needs to be done.
-	# Don't worry, it's just addition and subtraction.
-	#
-	# 65536 ought to be enough (tm), but for really rare cases the
-	# maximums might need to be higher, but that only happens when
-	# your /etc/sub{u,g}id allow users to have more IDs.  Unless
-	# --keep-uid is supported, let's do this in a way that should
-	# work for everyone.
-	CI_MAX_UID = $(shell sed -n "s/^$(CI_USER_LOGIN):[^:]\+://p" /etc/subuid)
-	CI_MAX_GID = $(shell sed -n "s/^$(CI_USER_LOGIN):[^:]\+://p" /etc/subgid)
-	ifeq ($(CI_MAX_UID),)
-		CI_MAX_UID = 65536
-	endif
-	ifeq ($(CI_MAX_GID),)
-		CI_MAX_GID = 65536
-	endif
-	CI_UID_OTHER = $(shell echo $$(($(CI_UID)+1)))
-	CI_GID_OTHER = $(shell echo $$(($(CI_GID)+1)))
-	CI_UID_OTHER_RANGE = $(shell echo $$(($(CI_MAX_UID)-$(CI_UID))))
-	CI_GID_OTHER_RANGE = $(shell echo $$(($(CI_MAX_GID)-$(CI_GID))))
-
-	CI_PODMAN_ARGS = \
-		--uidmap 0:1:$(CI_UID) \
-		--uidmap $(CI_UID):0:1 \
-		--uidmap $(CI_UID_OTHER):$(CI_UID_OTHER):$(CI_UID_OTHER_RANGE) \
-		--gidmap 0:1:$(CI_GID) \
-		--gidmap $(CI_GID):0:1 \
-		--gidmap $(CI_GID_OTHER):$(CI_GID_OTHER):$(CI_GID_OTHER_RANGE) \
-		$(NULL)
-endif
-
-# Args to use when cloning a git repo.
-#  -c  stop it complaining about checking out a random hash
-#  -q  stop it displaying progress info for local clone
-#  --local ensure we don't actually copy files
-CI_GIT_ARGS = \
-	-c advice.detachedHead=false \
-	-q \
-	--local  \
-	$(NULL)
-
-# Args to use when running the container
-#   --rm      stop inactive containers getting left behind
-#   --user    we execute as the same user & group account
-#             as dev so that file ownership matches host
-#             instead of root:root
-#   --volume  to pass in the cloned git repo & config
-#   --ulimit  lower files limit for performance reasons
-#   --interactive
-#   --tty     Ensure we have ability to Ctrl-C the build
-CI_ENGINE_ARGS = \
-	--rm \
-	--interactive \
-	--tty \
-	$(CI_PODMAN_ARGS) \
-	$(CI_PWDB_MOUNTS) \
-	$(CI_HOME_MOUNTS) \
-	$(CI_SCRIPT_MOUNTS) \
-	--volume $(CI_HOST_SRCDIR):$(CI_CONT_SRCDIR):z \
-	--ulimit nofile=$(CI_ULIMIT_FILES):$(CI_ULIMIT_FILES) \
-	--cap-add=SYS_PTRACE \
-	$(NULL)
-
-ci-check-engine:
-	@echo -n "Checking if $(CI_ENGINE) is available..." && \
-	$(CI_ENGINE) version 1>/dev/null && echo "yes"
-
-ci-prepare-tree: ci-check-engine
-	@test "$(CI_REUSE)" != "1" && rm -rf $(CI_SCRATCHDIR) || :
-	@if ! test -d $(CI_SCRATCHDIR) ; then \
-		mkdir -p $(CI_SCRATCHDIR); \
-		cp /etc/passwd $(CI_SCRATCHDIR); \
-		cp /etc/group $(CI_SCRATCHDIR); \
-		mkdir -p $(CI_SCRATCHDIR)/home; \
-		cp "$(CI_PREPARE_SCRIPT)" $(CI_SCRATCHDIR)/prepare; \
-		cp "$(CI_BUILD_SCRIPT)" $(CI_SCRATCHDIR)/build; \
-		chmod +x "$(CI_SCRATCHDIR)/prepare" "$(CI_SCRATCHDIR)/build"; \
-		echo "Cloning $(CI_GIT_ROOT) to $(CI_HOST_SRCDIR)"; \
-		git clone $(CI_GIT_ARGS) $(CI_GIT_ROOT) $(CI_HOST_SRCDIR) || exit 1; \
-		for mod in $$(git submodule | awk '{ print $$2 }' | sed -E 's,^../,,g') ; \
-		do \
-			test -f $(CI_GIT_ROOT)/$$mod/.git || continue ; \
-			echo "Cloning $(CI_GIT_ROOT)/$$mod to $(CI_HOST_SRCDIR)/$$mod"; \
-			git clone $(CI_GIT_ARGS) $(CI_GIT_ROOT)/$$mod $(CI_HOST_SRCDIR)/$$mod || exit 1; \
-		done ; \
-	fi
-
-ci-run-command@%: ci-prepare-tree
-	$(CI_ENGINE) run $(CI_ENGINE_ARGS) $(CI_IMAGE_PREFIX)$*$(CI_IMAGE_TAG) \
-		/bin/bash -c ' \
-		$(CI_USER_HOME)/prepare || exit 1; \
-		sudo \
-		  --login \
-		  --user="#$(CI_UID)" \
-		  --group="#$(CI_GID)" \
-		  CONFIGURE_OPTS="$$CONFIGURE_OPTS" \
-		  CI_CONT_SRCDIR="$(CI_CONT_SRCDIR)" \
-		  CI_CONT_BUILDDIR="$(CI_CONT_BUILDDIR)" \
-		  CI_SMP="$(CI_SMP)" \
-		  CI_CONFIGURE="$(CI_CONFIGURE)" \
-		  CI_CONFIGURE_ARGS="$(CI_CONFIGURE_ARGS)" \
-		  CI_MAKE_ARGS="$(CI_MAKE_ARGS)" \
-		  $(CI_COMMAND) || exit 1'
-	@test "$(CI_CLEAN)" = "1" && rm -rf $(CI_SCRATCHDIR) || :
-
-ci-shell@%:
-	$(MAKE) -C $(CI_ROOTDIR) ci-run-command@$* CI_COMMAND="/bin/bash"
-
-ci-build@%:
-	$(MAKE) -C $(CI_ROOTDIR) ci-run-command@$* CI_COMMAND="$(CI_USER_HOME)/build"
-
-ci-check@%:
-	$(MAKE) -C $(CI_ROOTDIR) ci-build@$* CI_MAKE_ARGS="check"
-
-ci-list-images:
-	@echo
-	@echo "Available x86 container images:"
-	@echo
-	@sh list-images.sh "$(CI_ENGINE)" "$(CI_IMAGE_PREFIX)" | grep -v cross
-	@echo
-	@echo "Available cross-compiler container images:"
-	@echo
-	@sh list-images.sh "$(CI_ENGINE)" "$(CI_IMAGE_PREFIX)" | grep cross
-	@echo
-
-ci-help:
-	@echo "Build libvirt inside containers used for CI"
-	@echo
-	@echo "Available targets:"
-	@echo
-	@echo "    ci-build@\$$IMAGE - run a default 'make'"
-	@echo "    ci-check@\$$IMAGE - run a 'make check'"
-	@echo "    ci-shell@\$$IMAGE - run an interactive shell"
-	@echo "    ci-list-images  - list available images"
-	@echo "    ci-help         - show this help message"
-	@echo
-	@echo "Available make variables:"
-	@echo
-	@echo "    CI_CLEAN=0     - do not delete '$(CI_SCRATCHDIR)' after completion"
-	@echo "    CI_REUSE=1     - re-use existing '$(CI_SCRATCHDIR)' content"
-	@echo "    CI_ENGINE=auto - container engine to use (podman, docker)"
-	@echo
--- a/ci/build.sh
+++ b/ci/build.sh
@@ -1,38 +0,0 @@
-# This script is used to build libvirt inside the container.
-#
-# You can customize it to your liking, or alternatively use a
-# completely different script by passing
-#
-#  CI_BUILD_SCRIPT=/path/to/your/build/script
-#
-# to make.
-
-mkdir -p "$CI_CONT_BUILDDIR" || exit 1
-cd "$CI_CONT_BUILDDIR"
-
-export VIR_TEST_DEBUG=1
-NOCONFIGURE=1 "$CI_CONT_SRCDIR/autogen.sh" || exit 1
-
-# $CONFIGURE_OPTS is a env that can optionally be set in the container,
-# populated at build time from the Dockerfile. A typical use case would
-# be to pass --host/--target args to trigger cross-compilation
-#
-# This can be augmented by make local args in $CI_CONFIGURE_ARGS
-"$CI_CONFIGURE" $CONFIGURE_OPTS $CI_CONFIGURE_ARGS
-if test $? != 0; then
-    test -f config.log && cat config.log
-    exit 1
-fi
-find -name test-suite.log -delete
-
-make -j"$CI_SMP" $CI_MAKE_ARGS
-
-if test $? != 0; then \
-    LOGS=$(find -name test-suite.log)
-    if test "$LOGS"; then
-        echo "=== LOG FILE(S) START ==="
-        cat $LOGS
-        echo "=== LOG FILE(S) END ==="
-    fi
-    exit 1
-fi
--- a/ci/list-images.sh
+++ b/ci/list-images.sh
@@ -1,26 +0,0 @@
-#!/bin/sh
-
-engine="$1"
-prefix="$2"
-
-do_podman() {
-    # Podman freaks out if the search term ends with a dash, which ours
-    # by default does, so let's strip it. The repository name is the
-    # second field in the output, and it already starts with the registry
-    podman search --limit 100 "${prefix%-}" | while read _ repo _; do
-        echo "$repo"
-    done
-}
-
-do_docker() {
-    # Docker doesn't include the registry name in the output, so we have
-    # to add it. The repository name is the first field in the output
-    registry="${prefix%%/*}"
-    docker search --limit 100 "$prefix" | while read repo _; do
-        echo "$registry/$repo"
-    done
-}
-
-"do_$engine" | grep "^$prefix" | sed "s,^$prefix,,g" | while read repo; do
-    echo "    $repo"
-done | sort -u
--- a/ci/prepare.sh
+++ b/ci/prepare.sh
@@ -1,13 +0,0 @@
-# This script is used to prepare the environment that will be used
-# to build libvirt inside the container.
-#
-# You can customize it to your liking, or alternatively use a
-# completely different script by passing
-#
-#  CI_PREPARE_SCRIPT=/path/to/your/prepare/script
-#
-# to make.
-#
-# Note that this script will have root privileges inside the
-# container, so it can be used for things like installing additional
-# packages.
--- a/config-post.h
+++ b/config-post.h
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2013 Red Hat, Inc.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __GNUC__
-# error "Libvirt requires GCC >= 4.8, or CLang"
-#endif
-
-/*
- * Define __GNUC_PREREQ to a sane default if it isn't yet defined.
- * This is done here so that it's included as early as possible;
- */
-#ifndef __GNUC_PREREQ
-# define __GNUC_PREREQ(maj, min) \
-    ((__GNUC__ << 16) + __GNUC_MINOR__ >= ((maj) << 16) + (min))
-#endif
-
-#if defined(__clang_major__) && defined(__clang_minor__)
-# ifdef __apple_build_version__
-#  if __clang_major__ < 5 || (__clang_major__ == 5 && __clang_minor__ < 1)
-#   error You need at least XCode Clang v5.1 to compile QEMU
-#  endif
-# else
-#  if __clang_major__ < 3 || (__clang_major__ == 3 && __clang_minor__ < 4)
-#   error You need at least Clang v3.4 to compile QEMU
-#  endif
-# endif
-#elif defined(__GNUC__) && defined(__GNUC_MINOR__)
-# if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)
-#  error You need at least GCC v4.8 to compile QEMU
-# endif
-#else
-# error You either need at least GCC 4.8 or Clang 3.4 or XCode Clang 5.1 to compile libvirt
-#endif
-
-/* Ask for warnings for anything that was marked deprecated in
- * the defined version, or before. It is a candidate for rewrite.
- */
-#define GLIB_VERSION_MIN_REQUIRED GLIB_VERSION_2_48
-
-/* Ask for warnings if code tries to use function that did not
- * exist in the defined version. These risk breaking builds
- */
-#define GLIB_VERSION_MAX_ALLOWED GLIB_VERSION_2_48
--- a/configure.ac
+++ b/configure.ac
--- a/daemon/Makefile.am
+++ b/daemon/Makefile.am
@@ -0,0 +1,384 @@
+## Process this file with automake to produce Makefile.in
+
+## Copyright (C) 2005-2012 Red Hat, Inc.
+## See COPYING.LIB for the License of this software
+
+INCLUDES = \
+	-I$(top_builddir)/gnulib/lib -I$(top_srcdir)/gnulib/lib \
+	-I$(top_builddir)/include -I$(top_srcdir)/include \
+	-I$(top_builddir)/src -I$(top_srcdir)/src \
+	-I$(top_srcdir)/src/util \
+	-I$(top_srcdir)/src/conf \
+	-I$(top_srcdir)/src/rpc \
+	-I$(top_srcdir)/src/remote \
+	$(GETTEXT_CPPFLAGS)
+
+CLEANFILES =
+
+DAEMON_GENERATED =					\
+		$(srcdir)/remote_dispatch.h		\
+		$(srcdir)/qemu_dispatch.h
+
+DAEMON_SOURCES =					\
+		libvirtd.c libvirtd.h			\
+		remote.c remote.h			\
+		stream.c stream.h			\
+		../src/remote/remote_protocol.c		\
+		../src/remote/qemu_protocol.c		\
+		$(DAEMON_GENERATED)
+
+DISTCLEANFILES =
+EXTRA_DIST =						\
+	remote_dispatch.h				\
+	qemu_dispatch.h					\
+	libvirtd.conf					\
+	libvirtd.init.in				\
+	libvirtd.upstart				\
+	libvirtd.policy-0				\
+	libvirtd.policy-1				\
+	libvirtd.sasl					\
+	libvirtd.sysconf				\
+	libvirtd.sysctl					\
+	libvirtd.aug                                    \
+	libvirtd.logrotate.in                           \
+	libvirtd.qemu.logrotate.in                      \
+	libvirtd.lxc.logrotate.in                       \
+	libvirtd.uml.logrotate.in                       \
+	test_libvirtd.aug                               \
+	THREADS.txt					\
+	libvirtd.pod.in					\
+	libvirtd.8.in					\
+	$(DAEMON_SOURCES)
+
+BUILT_SOURCES =
+
+REMOTE_PROTOCOL = $(top_srcdir)/src/remote/remote_protocol.x
+QEMU_PROTOCOL = $(top_srcdir)/src/remote/qemu_protocol.x
+
+$(srcdir)/remote_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
+		$(REMOTE_PROTOCOL)
+	$(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -b remote \
+	  $(REMOTE_PROTOCOL) > $@
+
+$(srcdir)/qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
+		$(QEMU_PROTOCOL)
+	$(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -b qemu \
+	  $(QEMU_PROTOCOL) > $@
+
+if WITH_LIBVIRTD
+
+man8_MANS = libvirtd.8
+
+sbin_PROGRAMS = libvirtd
+
+confdir = $(sysconfdir)/libvirt/
+conf_DATA = libvirtd.conf
+
+augeasdir = $(datadir)/augeas/lenses
+augeas_DATA = libvirtd.aug
+
+augeastestsdir = $(datadir)/augeas/lenses/tests
+augeastests_DATA = test_libvirtd.aug
+
+libvirtd.8: $(srcdir)/libvirtd.8.in
+	sed \
+	    -e 's![@]sysconfdir[@]!$(sysconfdir)!g' \
+	    -e 's![@]localstatedir[@]!$(localstatedir)!g' \
+	    -e 's![@]remote_pid_file[@]!$(REMOTE_PID_FILE)!g' \
+	    < $< > $@-t
+	mv $@-t $@
+
+libvirtd_SOURCES = $(DAEMON_SOURCES)
+
+#-D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED=1 -D_POSIX_C_SOURCE=199506L
+libvirtd_CFLAGS = \
+	$(LIBXML_CFLAGS) $(GNUTLS_CFLAGS) $(SASL_CFLAGS) \
+	$(XDR_CFLAGS) $(POLKIT_CFLAGS) \
+	$(WARN_CFLAGS) \
+	$(COVERAGE_CFLAGS) \
+	-DQEMUD_PID_FILE="\"$(QEMUD_PID_FILE)\"" \
+	-DREMOTE_PID_FILE="\"$(REMOTE_PID_FILE)\""
+
+libvirtd_LDFLAGS =					\
+	$(WARN_CFLAGS)					\
+	$(COVERAGE_LDFLAGS)
+
+libvirtd_LDADD =					\
+	$(LIBXML_LIBS)					\
+	$(GNUTLS_LIBS)					\
+	$(SASL_LIBS)					\
+	$(POLKIT_LIBS)
+
+if WITH_DTRACE_PROBES
+libvirtd_LDADD += ../src/probes.o
+endif
+
+libvirtd_LDADD += \
+	../src/libvirt-qemu.la
+
+if ! WITH_DRIVER_MODULES
+if WITH_QEMU
+    libvirtd_LDADD += ../src/libvirt_driver_qemu.la
+endif
+
+if WITH_LXC
+    libvirtd_LDADD += ../src/libvirt_driver_lxc.la
+endif
+
+if WITH_LIBXL
+    libvirtd_LDADD += ../src/libvirt_driver_libxl.la
+endif
+
+if WITH_UML
+    libvirtd_LDADD += ../src/libvirt_driver_uml.la
+endif
+
+if WITH_STORAGE_DIR
+    libvirtd_LDADD += ../src/libvirt_driver_storage.la
+endif
+
+if WITH_NETWORK
+    libvirtd_LDADD += ../src/libvirt_driver_network.la
+endif
+
+if WITH_NETCF
+    libvirtd_LDADD += ../src/libvirt_driver_interface.la
+endif
+
+if WITH_NODE_DEVICES
+    libvirtd_LDADD += ../src/libvirt_driver_nodedev.la
+endif
+
+if WITH_SECRETS
+    libvirtd_LDADD += ../src/libvirt_driver_secret.la
+endif
+
+if WITH_NWFILTER
+    libvirtd_LDADD += ../src/libvirt_driver_nwfilter.la
+endif
+endif
+
+libvirtd_LDADD += ../src/libvirt.la
+
+if HAVE_POLKIT
+if HAVE_POLKIT0
+policydir = $(datadir)/PolicyKit/policy
+policyfile = libvirtd.policy-0
+else
+policydir = $(datadir)/polkit-1/actions
+policyfile = libvirtd.policy-1
+endif
+endif
+
+install-data-local: install-init-redhat install-init-systemd install-init-upstart \
+		install-data-sasl install-data-polkit \
+		install-logrotate install-sysctl
+	$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt \
+		   $(DESTDIR)$(localstatedir)/run/libvirt \
+		   $(DESTDIR)$(localstatedir)/lib/libvirt
+
+uninstall-local:: uninstall-init-redhat uninstall-init-systemd uninstall-init-upstart \
+		uninstall-data-sasl uninstall-data-polkit \
+		uninstall-logrotate uninstall-sysctl
+	rmdir $(DESTDIR)$(localstatedir)/log/libvirt || :
+	rmdir $(DESTDIR)$(localstatedir)/run/libvirt || :
+	rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || :
+
+if HAVE_POLKIT
+install-data-polkit::
+	$(MKDIR_P) $(DESTDIR)$(policydir)
+	$(INSTALL_DATA) $(srcdir)/$(policyfile) $(DESTDIR)$(policydir)/org.libvirt.unix.policy
+uninstall-data-polkit::
+	rm -f $(DESTDIR)$(policydir)/org.libvirt.unix.policy
+	rmdir $(DESTDIR)$(policydir) || :
+else
+install-data-polkit::
+uninstall-data-polkit::
+endif
+
+remote.c: $(DAEMON_GENERATED)
+remote.h: $(DAEMON_GENERATED)
+
+LOGROTATE_CONFS = libvirtd.qemu.logrotate libvirtd.lxc.logrotate \
+		  libvirtd.uml.logrotate libvirtd.logrotate
+
+BUILT_SOURCES += $(LOGROTATE_CONFS)
+
+libvirtd.logrotate: libvirtd.logrotate.in
+	sed							\
+	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
+	    < $< > $@-t
+	mv $@-t $@
+
+libvirtd.qemu.logrotate: libvirtd.qemu.logrotate.in
+	sed							\
+	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
+	    < $< > $@-t
+	mv $@-t $@
+
+libvirtd.lxc.logrotate: libvirtd.lxc.logrotate.in
+	$(AM_V_GEN)sed						\
+	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
+	    < $< > $@-t &&					\
+	    mv $@-t $@
+
+libvirtd.uml.logrotate: libvirtd.uml.logrotate.in
+	$(AM_V_GEN)sed						\
+	    -e 's![@]localstatedir[@]!$(localstatedir)!g'	\
+	    < $< > $@-t &&					\
+	    mv $@-t $@
+
+install-logrotate: $(LOGROTATE_CONFS)
+	$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt/qemu/ \
+		   $(DESTDIR)$(localstatedir)/log/libvirt/lxc/ \
+		   $(DESTDIR)$(localstatedir)/log/libvirt/uml/ \
+		   $(DESTDIR)$(sysconfdir)/logrotate.d/
+	$(INSTALL_DATA) libvirtd.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd
+	$(INSTALL_DATA) libvirtd.qemu.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu
+	$(INSTALL_DATA) libvirtd.lxc.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc
+	$(INSTALL_DATA) libvirtd.uml.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
+
+uninstall-logrotate:
+	rm -f $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd \
+	      $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu \
+	      $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc \
+	      $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
+	rmdir $(DESTDIR)$(localstatedir)/log/libvirt/qemu || :
+	rmdir $(DESTDIR)$(localstatedir)/log/libvirt/lxc || :
+	rmdir $(DESTDIR)$(localstatedir)/log/libvirt/uml || :
+	rmdir $(DESTDIR)$(sysconfdir)/logrotate.d || :
+
+install-sysconfig:
+	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
+	$(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \
+	  $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
+uninstall-sysconfig:
+	rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
+	rmdir $(DESTDIR)$(sysconfdir)/sysconfig || :
+
+if WITH_SYSCTL
+install-sysctl:
+	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysctl.d
+	$(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \
+	  $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd
+
+uninstall-sysctl:
+	rm -f $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd
+	rmdir $(DESTDIR)$(sysconfdir)/sysctl.d || :
+else
+install-sysctl:
+uninstall-sysctl:
+endif
+
+if LIBVIRT_INIT_SCRIPT_RED_HAT
+
+BUILT_SOURCES += libvirtd.init
+
+install-init-redhat: install-sysconfig libvirtd.init
+	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
+	$(INSTALL_SCRIPT) libvirtd.init \
+	  $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
+
+uninstall-init-redhat: uninstall-sysconfig
+	rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
+	rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d || :
+else
+install-init-redhat:
+uninstall-init-redhat:
+endif # LIBVIRT_INIT_SCRIPT_RED_HAT
+
+
+if LIBVIRT_INIT_SCRIPT_UPSTART
+
+install-init-upstart: install-sysconfig
+	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/event.d
+	$(INSTALL_SCRIPT) libvirtd.upstart \
+	  $(DESTDIR)$(sysconfdir)/event.d/libvirtd
+
+uninstall-init-upstart: uninstall-sysconfig
+	rm -f $(DESTDIR)$(sysconfdir)/event.d/libvirtd
+	rmdir $(DESTDIR)$(sysconfdir)/event.d || :
+else
+install-init-upstart:
+uninstall-init-upstart:
+endif # LIBVIRT_INIT_SCRIPT_UPSTART
+
+
+EXTRA_DIST += libvirtd.service.in
+if LIBVIRT_INIT_SCRIPT_SYSTEMD
+
+SYSTEMD_UNIT_DIR = /lib/systemd/system
+BUILT_SOURCES += libvirtd.service
+
+install-init-systemd: install-sysconfig libvirtd.service
+	$(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
+	$(INSTALL_SCRIPT) libvirtd.service \
+	  $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
+
+uninstall-init-systemd: uninstall-sysconfig
+	rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
+	rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) || :
+else
+install-init-systemd:
+uninstall-init-systemd:
+endif # LIBVIRT_INIT_SCRIPT_SYSTEMD
+
+libvirtd.init: libvirtd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)sed					\
+	    -e s!\@localstatedir\@!$(localstatedir)!g	\
+	    -e s!\@sbindir\@!$(sbindir)!g		\
+	    -e s!\@sysconfdir\@!$(sysconfdir)!g		\
+	    < $< > $@-t &&				\
+	    chmod a+x $@-t &&				\
+	    mv $@-t $@
+
+libvirtd.service: libvirtd.service.in $(top_builddir)/config.status
+	$(AM_V_GEN)sed					\
+	    -e s!\@localstatedir\@!$(localstatedir)!g	\
+	    -e s!\@sbindir\@!$(sbindir)!g		\
+	    -e s!\@sysconfdir\@!$(sysconfdir)!g		\
+	    < $< > $@-t &&				\
+	    chmod a+x $@-t &&				\
+	    mv $@-t $@
+
+
+check-local:
+	$(AM_V_GEN)if test -x '$(AUGPARSE)'; then \
+	  '$(AUGPARSE)' -I $(srcdir) $(srcdir)/test_libvirtd.aug; \
+	fi
+
+
+# This must be added last, since functions it provides/replaces
+# are used by nearly every other library.
+libvirtd_LDADD += ../gnulib/lib/libgnu.la $(LIBSOCKET)
+
+else # WITH_LIBVIRTD
+install-data-local: install-data-sasl
+uninstall-local:: uninstall-data-sasl
+endif # WITH_LIBVIRTD
+
+POD2MAN = pod2man -c "Virtualization Support" \
+			-r "$(PACKAGE)-$(VERSION)" -s 8
+
+$(srcdir)/libvirtd.8.in: libvirtd.pod.in
+	$(AM_V_GEN)$(POD2MAN) $< $@
+
+# This is needed for clients too, so can't wrap in
+# the WITH_LIBVIRTD conditional
+if HAVE_SASL
+install-data-sasl:
+	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
+	$(INSTALL_DATA) $(srcdir)/libvirtd.sasl $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
+
+uninstall-data-sasl:
+	rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
+	rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
+else
+install-data-sasl:
+uninstall-data-sasl:
+endif
+
+
+CLEANFILES += $(BUILT_SOURCES) $(man8_MANS)
+CLEANFILES += *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
+MAINTAINERCLEANFILES = $(srcdir)/libvirtd.8.in $(DAEMON_GENERATED)
--- a/daemon/THREADS.txt
+++ b/daemon/THREADS.txt
@@ -0,0 +1,52 @@
+
+     Threading in the libvirtd daemon
+     ================================
+
+To allow efficient processing of RPC requests, the libvirtd daemon
+makes use of threads.
+
+ - The process leader. This is the initial thread of control
+   when the daemon starts running. It is responsible for
+   initializing all the state, and starting the event loop.
+   Once that's all done, this thread does nothing except
+   wait for the event loop to quit, thus indicating an orderly
+   shutdown is required.
+
+ - The event loop. This thread runs the event loop, sitting
+   in poll() on all monitored file handles, and calculating
+   and dispatching any timers that may be registered. When
+   this thread quits, the entire daemon will shutdown.
+
+ - The workers. These 'n' threads all sit around waiting to
+   process incoming RPC requests. Since RPC requests may take
+   a long time to complete, with long idle periods, there will
+   be quite a few workers running.
+
+The use of threads obviously requires locking to ensure safety when
+accessing/changing data structures.
+
+ - the top level lock is on 'struct qemud_server'. This must be
+   held before acquiring any other lock
+
+ - Each 'struct qemud_client' object has a lock. The server lock
+   must be held before acquiring it. Once the client lock is acquired
+   the server lock can (optionally) be dropped.
+
+ - The event loop has its own self-contained lock. You can ignore
+   this as a caller of virEvent APIs.
+
+
+The server lock is used in conjunction with a condition variable
+to pass jobs from the event loop thread to the workers. The main
+event loop thread handles I/O from the client socket, and once a
+complete RPC message has been read off the wire (and optionally
+decrypted), it will be placed onto the 'dx' job queue for the
+associated client object. The job condition will be signalled and
+a worker will wakup and process it.
+
+The worker thread must quickly drop its locks on the server and
+client to allow the main event loop thread to continue running
+with its other work. Critically important, is that now libvirt
+API call will ever be made with the server or client locks held.
+
+-- End
--- a/daemon/libvirtd.aug
+++ b/daemon/libvirtd.aug
@@ -0,0 +1,93 @@
+(* /etc/libvirt/libvirtd.conf *)
+
+module Libvirtd =
+   autoload xfm
+
+   let eol   = del /[ \t]*\n/ "\n"
+   let value_sep   = del /[ \t]*=[ \t]*/  " = "
+   let indent = del /[ \t]*/ ""
+
+   let array_sep  = del /,[ \t\n]*/ ", "
+   let array_start = del /\[[ \t\n]*/ "[ "
+   let array_end = del /\]/ "]"
+
+   let str_val = del /\"/ "\"" . store /[^\"]*/ . del /\"/ "\""
+   let bool_val = store /0|1/
+   let int_val = store /[0-9]+/
+   let str_array_element = [ seq "el" . str_val ] . del /[ \t\n]*/ ""
+   let str_array_val = counter "el" . array_start . ( str_array_element . ( array_sep . str_array_element ) * ) ? . array_end
+
+   let str_entry       (kw:string) = [ key kw . value_sep . str_val ]
+   let bool_entry      (kw:string) = [ key kw . value_sep . bool_val ]
+   let int_entry      (kw:string) = [ key kw . value_sep . int_val ]
+   let str_array_entry (kw:string) = [ key kw . value_sep . str_array_val ]
+
+
+   (* Config entry grouped by function - same order as example config *)
+   let network_entry = bool_entry "listen_tls"
+                     | bool_entry "listen_tcp"
+                     | str_entry "tls_port"
+                     | str_entry "tcp_port"
+                     | str_entry "listen_addr"
+                     | bool_entry "mdns_adv"
+                     | str_entry "mdns_name"
+
+   let sock_acl_entry = str_entry "unix_sock_group"
+                      | str_entry "unix_sock_ro_perms"
+                      | str_entry "unix_sock_rw_perms"
+                      | str_entry "unix_sock_dir"
+
+   let authentication_entry = str_entry "auth_unix_ro"
+                            | str_entry "auth_unix_rw"
+                            | str_entry "auth_tcp"
+                            | str_entry "auth_tls"
+
+   let certificate_entry = str_entry "key_file"
+                         | str_entry "cert_file"
+                         | str_entry "ca_file"
+                         | str_entry "crl_file"
+
+   let authorization_entry = bool_entry "tls_no_verify_certificate"
+                           | bool_entry "tls_no_sanity_certificate"
+                           | str_array_entry "tls_allowed_dn_list"
+                           | str_array_entry "sasl_allowed_username_list"
+
+   let processing_entry = int_entry "min_workers"
+                        | int_entry "max_workers"
+                        | int_entry "max_clients"
+                        | int_entry "max_requests"
+                        | int_entry "max_client_requests"
+                        | int_entry "prio_workers"
+
+   let logging_entry = int_entry "log_level"
+                     | str_entry "log_filters"
+                     | str_entry "log_outputs"
+
+   let auditing_entry = int_entry "audit_level"
+                      | bool_entry "audit_logging"
+
+   let keepalive_entry = int_entry "keepalive_interval"
+                       | int_entry "keepalive_count"
+                       | bool_entry "keepalive_required"
+
+   (* Each enty in the config is one of the following three ... *)
+   let entry = network_entry
+             | sock_acl_entry
+             | authentication_entry
+             | certificate_entry
+             | authorization_entry
+             | processing_entry
+             | logging_entry
+             | auditing_entry
+             | keepalive_entry
+   let comment = [ label "#comment" . del /#[ \t]*/ "# " .  store /([^ \t\n][^\n]*)?/ . del /\n/ "\n" ]
+   let empty = [ label "#empty" . eol ]
+
+   let record = indent . entry . eol
+
+   let lns = ( record | comment | empty ) *
+
+   let filter = incl "/etc/libvirt/libvirtd.conf"
+              . Util.stdexcl
+
+   let xfm = transform lns filter
--- a/daemon/libvirtd.c
+++ b/daemon/libvirtd.c
--- a/daemon/libvirtd.conf
+++ b/daemon/libvirtd.conf
@@ -0,0 +1,393 @@
+# Master libvirt daemon configuration file
+#
+# For further information consult http://libvirt.org/format.html
+#
+# NOTE: the tests/daemon-conf regression test script requires
+# that each "PARAMETER = VALUE" line in this file have the parameter
+# name just after a leading "#".
+
+#################################################################
+#
+# Network connectivity controls
+#
+
+# Flag listening for secure TLS connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# It is necessary to setup a CA and issue server certificates before
+# using this capability.
+#
+# This is enabled by default, uncomment this to disable it
+#listen_tls = 0
+
+# Listen for unencrypted TCP connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# Using the TCP socket requires SASL authentication by default. Only
+# SASL mechanisms which support data encryption are allowed. This is
+# DIGEST_MD5 and GSSAPI (Kerberos5)
+#
+# This is disabled by default, uncomment this to enable it.
+#listen_tcp = 1
+
+
+
+# Override the port for accepting secure TLS connections
+# This can be a port number, or service name
+#
+#tls_port = "16514"
+
+# Override the port for accepting insecure TCP connections
+# This can be a port number, or service name
+#
+#tcp_port = "16509"
+
+
+# Override the default configuration which binds to all network
+# interfaces. This can be a numeric IPv4/6 address, or hostname
+#
+#listen_addr = "192.168.0.1"
+
+
+# Flag toggling mDNS advertizement of the libvirt service.
+#
+# Alternatively can disable for all services on a host by
+# stopping the Avahi daemon
+#
+# This is disabled by default, uncomment this to enable it
+#mdns_adv = 1
+
+# Override the default mDNS advertizement name. This must be
+# unique on the immediate broadcast network.
+#
+# The default is "Virtualization Host HOSTNAME", where HOSTNAME
+# is subsituted for the short hostname of the machine (without domain)
+#
+#mdns_name = "Virtualization Host Joe Demo"
+
+
+#################################################################
+#
+# UNIX socket access controls
+#
+
+# Set the UNIX domain socket group ownership. This can be used to
+# allow a 'trusted' set of users access to management capabilities
+# without becoming root.
+#
+# This is restricted to 'root' by default.
+#unix_sock_group = "libvirt"
+
+# Set the UNIX socket permissions for the R/O socket. This is used
+# for monitoring VM status only
+#
+# Default allows any user. If setting group ownership may want to
+# restrict this to:
+#unix_sock_ro_perms = "0777"
+
+# Set the UNIX socket permissions for the R/W socket. This is used
+# for full management of VMs
+#
+# Default allows only root. If PolicyKit is enabled on the socket,
+# the default will change to allow everyone (eg, 0777)
+#
+# If not using PolicyKit and setting group ownership for access
+# control then you may want to relax this to:
+#unix_sock_rw_perms = "0770"
+
+# Set the name of the directory in which sockets will be found/created.
+#unix_sock_dir = "/var/run/libvirt"
+
+#################################################################
+#
+# Authentication.
+#
+#  - none: do not perform auth checks. If you can connect to the
+#          socket you are allowed. This is suitable if there are
+#          restrictions on connecting to the socket (eg, UNIX
+#          socket permissions), or if there is a lower layer in
+#          the network providing auth (eg, TLS/x509 certificates)
+#
+#  - sasl: use SASL infrastructure. The actual auth scheme is then
+#          controlled from /etc/sasl2/libvirt.conf. For the TCP
+#          socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+#          For non-TCP or TLS sockets,  any scheme is allowed.
+#
+#  - polkit: use PolicyKit to authenticate. This is only suitable
+#            for use on the UNIX sockets. The default policy will
+#            require a user to supply their own password to gain
+#            full read/write access (aka sudo like), while anyone
+#            is allowed read/only access.
+#
+# Set an authentication scheme for UNIX read-only sockets
+# By default socket permissions allow anyone to connect
+#
+# To restrict monitoring of domains you may wish to enable
+# an authentication mechanism here
+#auth_unix_ro = "none"
+
+# Set an authentication scheme for UNIX read-write sockets
+# By default socket permissions only allow root. If PolicyKit
+# support was compiled into libvirt, the default will be to
+# use 'polkit' auth.
+#
+# If the unix_sock_rw_perms are changed you may wish to enable
+# an authentication mechanism here
+#auth_unix_rw = "none"
+
+# Change the authentication scheme for TCP sockets.
+#
+# If you don't enable SASL, then all TCP traffic is cleartext.
+# Don't do this outside of a dev/test scenario. For real world
+# use, always enable SASL and use the GSSAPI or DIGEST-MD5
+# mechanism in /etc/sasl2/libvirt.conf
+#auth_tcp = "sasl"
+
+# Change the authentication scheme for TLS sockets.
+#
+# TLS sockets already have encryption provided by the TLS
+# layer, and limited authentication is done by certificates
+#
+# It is possible to make use of any SASL authentication
+# mechanism as well, by using 'sasl' for this option
+#auth_tls = "none"
+
+
+
+#################################################################
+#
+# TLS x509 certificate configuration
+#
+
+
+# Override the default server key file path
+#
+#key_file = "/etc/pki/libvirt/private/serverkey.pem"
+
+# Override the default server certificate file path
+#
+#cert_file = "/etc/pki/libvirt/servercert.pem"
+
+# Override the default CA certificate path
+#
+#ca_file = "/etc/pki/CA/cacert.pem"
+
+# Specify a certificate revocation list.
+#
+# Defaults to not using a CRL, uncomment to enable it
+#crl_file = "/etc/pki/CA/crl.pem"
+
+
+
+#################################################################
+#
+# Authorization controls
+#
+
+
+# Flag to disable verification of our own server certificates
+#
+# When libvirtd starts it performs some sanity checks against
+# its own certificates.
+#
+# Default is to always run sanity checks. Uncommenting this
+# will disable sanity checks which is not a good idea
+#tls_no_sanity_certificate = 1
+
+# Flag to disable verification of client certificates
+#
+# Client certificate verification is the primary authentication mechanism.
+# Any client which does not present a certificate signed by the CA
+# will be rejected.
+#
+# Default is to always verify. Uncommenting this will disable
+# verification - make sure an IP whitelist is set
+#tls_no_verify_certificate = 1
+
+
+# A whitelist of allowed x509  Distinguished Names
+# This list may contain wildcards such as
+#
+#    "C=GB,ST=London,L=London,O=Red Hat,CN=*"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no DN's are checked
+#tls_allowed_dn_list = ["DN1", "DN2"]
+
+
+# A whitelist of allowed SASL usernames. The format for usernames
+# depends on the SASL authentication mechanism. Kerberos usernames
+# look like username@REALM
+#
+# This list may contain wildcards such as
+#
+#    "*@EXAMPLE.COM"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no Username's are checked
+#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
+
+
+
+#################################################################
+#
+# Processing controls
+#
+
+# The maximum number of concurrent client connections to allow
+# over all sockets combined.
+#max_clients = 20
+
+
+# The minimum limit sets the number of workers to start up
+# initially. If the number of active clients exceeds this,
+# then more threads are spawned, upto max_workers limit.
+# Typically you'd want max_workers to equal maximum number
+# of clients allowed
+#min_workers = 5
+#max_workers = 20
+
+
+# The number of priority workers. If all workers from above
+# pool will stuck, some calls marked as high priority
+# (notably domainDestroy) can be executed in this pool.
+#prio_workers = 5
+
+# Total global limit on concurrent RPC calls. Should be
+# at least as large as max_workers. Beyond this, RPC requests
+# will be read into memory and queued. This directly impact
+# memory usage, currently each request requires 256 KB of
+# memory. So by default upto 5 MB of memory is used
+#
+# XXX this isn't actually enforced yet, only the per-client
+# limit is used so far
+#max_requests = 20
+
+# Limit on concurrent requests from a single client
+# connection. To avoid one client monopolizing the server
+# this should be a small fraction of the global max_requests
+# and max_workers parameter
+#max_client_requests = 5
+
+#################################################################
+#
+# Logging controls
+#
+
+# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
+# basically 1 will log everything possible
+#log_level = 3
+
+# Logging filters:
+# A filter allows to select a different logging level for a given category
+# of logs
+# The format for a filter is:
+#    x:name
+#      where name is a match string e.g. remote or qemu
+# the x prefix is the minimal level where matching messages should be logged
+#    1: DEBUG
+#    2: INFO
+#    3: WARNING
+#    4: ERROR
+#
+# Multiple filter can be defined in a single @filters, they just need to be
+# separated by spaces.
+#
+# e.g:
+# log_filters="3:remote 4:event"
+# to only get warning or errors from the remote layer and only errors from
+# the event layer.
+
+# Logging outputs:
+# An output is one of the places to save logging information
+# The format for an output can be:
+#    x:stderr
+#      output goes to stderr
+#    x:syslog:name
+#      use syslog for the output and use the given name as the ident
+#    x:file:file_path
+#      output to a file, with the given filepath
+# In all case the x prefix is the minimal level, acting as a filter
+#    1: DEBUG
+#    2: INFO
+#    3: WARNING
+#    4: ERROR
+#
+# Multiple output can be defined, they just need to be separated by spaces.
+# e.g.:
+# log_outputs="3:syslog:libvirtd"
+# to log all warnings and errors to syslog under the libvirtd ident
+
+# Log debug buffer size: default 64
+# The daemon keeps an internal debug log buffer which will be dumped in case
+# of crash or upon receiving a SIGUSR2 signal. This setting allows to override
+# the default buffer size in kilobytes.
+# If value is 0 or less the debug log buffer is deactivated
+#log_buffer_size = 64
+
+
+##################################################################
+#
+# Auditing
+#
+# This setting allows usage of the auditing subsystem to be altered:
+#
+#   audit_level == 0  -> disable all auditing
+#   audit_level == 1  -> enable auditing, only if enabled on host (default)
+#   audit_level == 2  -> enable auditing, and exit if disabled on host
+#
+#audit_level = 2
+#
+# If set to 1, then audit messages will also be sent
+# via libvirt logging infrastructure. Defaults to 0
+#
+#audit_logging = 1
+
+###################################################################
+# UUID of the host:
+# Provide the UUID of the host here in case the command
+# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
+# 'dmidecode' does not provide a valid UUID and none is provided here, a
+# temporary UUID will be generated.
+# Keep the format of the example UUID below. UUID must not have all digits
+# be the same.
+
+# NB This default all-zeros UUID will not work. Replace
+# it with the output of the 'uuidgen' command and then
+# uncomment this entry
+#host_uuid = "00000000-0000-0000-0000-000000000000"
+
+###################################################################
+# Keepalive protocol:
+# This allows libvirtd to detect broken client connections or even
+# dead client.  A keepalive message is sent to a client after
+# keepalive_interval seconds of inactivity to check if the client is
+# still responding; keepalive_count is a maximum number of keepalive
+# messages that are allowed to be sent to the client without getting
+# any response before the connection is considered broken.  In other
+# words, the connection is automatically closed approximately after
+# keepalive_interval * (keepalive_count + 1) seconds since the last
+# message received from the client.  If keepalive_interval is set to
+# -1, libvirtd will never send keepalive requests; however clients
+# can still send them and the deamon will send responses.  When
+# keepalive_count is set to 0, connections will be automatically
+# closed after keepalive_interval seconds of inactivity without
+# sending any keepalive messages.
+#
+#keepalive_interval = 5
+#keepalive_count = 5
+#
+# If set to 1, libvirtd will refuse to talk to clients that do not
+# support keepalive protocol.  Defaults to 0.
+#
+#keepalive_required = 1
--- a/daemon/libvirtd.h
+++ b/daemon/libvirtd.h
@@ -0,0 +1,75 @@
+/*
+ * libvirtd.h: daemon data structure definitions
+ *
+ * Copyright (C) 2006-2012 Red Hat, Inc.
+ * Copyright (C) 2006 Daniel P. Berrange
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+ *
+ * Author: Daniel P. Berrange <berrange@redhat.com>
+ */
+
+
+#ifndef LIBVIRTD_H__
+# define LIBVIRTD_H__
+
+# define VIR_ENUM_SENTINELS
+
+# include <config.h>
+
+# include <rpc/types.h>
+# include <rpc/xdr.h>
+# include "remote_protocol.h"
+# include "qemu_protocol.h"
+# include "logging.h"
+# include "threads.h"
+# if HAVE_SASL
+#  include "virnetsaslcontext.h"
+# endif
+# include "virnetserverprogram.h"
+
+typedef struct daemonClientStream daemonClientStream;
+typedef daemonClientStream *daemonClientStreamPtr;
+typedef struct daemonClientPrivate daemonClientPrivate;
+typedef daemonClientPrivate *daemonClientPrivatePtr;
+
+/* Stores the per-client connection state */
+struct daemonClientPrivate {
+    /* Hold while accessing any data except conn */
+    virMutex lock;
+
+    int domainEventCallbackID[VIR_DOMAIN_EVENT_ID_LAST];
+
+# if HAVE_SASL
+    virNetSASLSessionPtr sasl;
+# endif
+
+    /* This is only valid if a remote open call has been made on this
+     * connection, otherwise it will be NULL.  Also if remote close is
+     * called, it will be set back to NULL if that succeeds.
+     */
+    virConnectPtr conn;
+
+    daemonClientStreamPtr streams;
+    bool keepalive_supported;
+};
+
+# if HAVE_SASL
+extern virNetSASLContextPtr saslCtxt;
+# endif
+extern virNetServerProgramPtr remoteProgram;
+extern virNetServerProgramPtr qemuProgram;
+
+#endif
--- a/daemon/libvirtd.init.in
+++ b/daemon/libvirtd.init.in
@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# the following is the LSB init header see
+# http://www.linux-foundation.org/spec//booksets/LSB-Core-generic/LSB-Core-generic.html#INITSCRCOMCONV
+#
+### BEGIN INIT INFO
+# Provides: libvirtd
+# Required-Start: $network messagebus
+# Should-Start: $named
+# Should-Start: xend
+# Should-Start: avahi-daemon
+# Required-Stop: $network messagebus
+# Should-Stop: $named
+# Default-Start: 3 4 5
+# Short-Description: daemon for libvirt virtualization API
+# Description: This is a daemon for managing guest instances
+#              and libvirt virtual networks
+#              See http://libvirt.org
+### END INIT INFO
+
+# the following is chkconfig init header
+#
+# libvirtd:   guest and virtual network management daemon
+#
+# chkconfig: 345 97 03
+# description:  This is a daemon for managing guest instances \
+#               and libvirt virtual networks \
+#               See http://libvirt.org
+#
+# processname: libvirtd
+# pidfile: @localstatedir@/run/libvirtd.pid
+#
+
+# Source function library.
+. @sysconfdir@/rc.d/init.d/functions
+
+SERVICE=libvirtd
+PROCESS=libvirtd
+PIDFILE=@localstatedir@/run/$SERVICE.pid
+
+LIBVIRTD_CONFIG=
+LIBVIRTD_ARGS=
+KRB5_KTNAME=/etc/libvirt/krb5.tab
+
+test -f @sysconfdir@/sysconfig/libvirtd && . @sysconfdir@/sysconfig/libvirtd
+
+export QEMU_AUDIO_DRV
+export SDL_AUDIODRIVER
+
+LIBVIRTD_CONFIG_ARGS=
+if [ -n "$LIBVIRTD_CONFIG" ]
+then
+    LIBVIRTD_CONFIG_ARGS="--config $LIBVIRTD_CONFIG"
+fi
+
+RETVAL=0
+
+start() {
+    echo -n $"Starting $SERVICE daemon: "
+    mkdir -p @localstatedir@/cache/libvirt
+    rm -rf @localstatedir@/cache/libvirt/*
+
+    # LIBVIRTD_NOFILES_LIMIT from /etc/sysconfig/libvirtd is not handled
+    # automatically
+    if [ -n "$LIBVIRTD_NOFILES_LIMIT" ]; then
+        ulimit -n "$LIBVIRTD_NOFILES_LIMIT"
+    fi
+
+    KRB5_KTNAME=$KRB5_KTNAME daemon --pidfile $PIDFILE --check $SERVICE $PROCESS --daemon $LIBVIRTD_CONFIG_ARGS $LIBVIRTD_ARGS
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch @localstatedir@/lock/subsys/$SERVICE
+}
+
+stop() {
+    echo -n $"Stopping $SERVICE daemon: "
+
+    killproc -p $PIDFILE $PROCESS
+    RETVAL=$?
+    echo
+    if [ $RETVAL -eq 0 ]; then
+        rm -f @localstatedir@/lock/subsys/$SERVICE
+        rm -rf @localstatedir@/cache/libvirt/*
+    else
+        exit $RETVAL
+    fi
+}
+
+restart() {
+    stop
+    start
+}
+
+reload() {
+    echo -n $"Reloading $SERVICE configuration: "
+
+    killproc -p $PIDFILE $PROCESS -HUP
+    RETVAL=$?
+    echo
+    return $RETVAL
+}
+
+# See how we were called.
+case "$1" in
+    start|stop|restart|reload)
+        $1
+        ;;
+    status)
+        status -p $PIDFILE $PROCESS
+        RETVAL=$?
+        ;;
+    force-reload)
+        reload
+        ;;
+    condrestart|try-restart)
+        [ -f @localstatedir@/lock/subsys/$SERVICE ] && restart || :
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|status|restart|condrestart|reload|force-reload|try-restart}"
+        exit 2
+        ;;
+esac
+exit $RETVAL
--- a/src/remote/libvirtd.logrotate.in
+++ b/src/remote/libvirtd.logrotate.in
--- a/src/remote/libvirtd.lxc.logrotate.in
+++ b/src/remote/libvirtd.lxc.logrotate.in
@@ -1,8 +1,9 @@
@localstatedir@/log/libvirt/lxc/*.log {
-        size 2097153
+        weekly
        missingok
        rotate 4
        compress
        delaycompress
        copytruncate
+        minsize 100k
 }
--- a/daemon/libvirtd.pod.in
+++ b/daemon/libvirtd.pod.in
@@ -0,0 +1,168 @@
+=head1 NAME
+
+libvirtd - libvirtd management daemon
+
+=head1 SYNOPSIS
+
+B<libvirtd> [ -dlv ] [ -f config_file ] [ -p pid_file ] [ -t timeout_seconds ]
+
+B<libvirtd> --version
+
+=head1 DESCRIPTION
+
+The B<libvirtd> program is the server side daemon component of the libvirt
+virtualization management system.
+
+This daemon runs on host servers and performs required management tasks for
+virtualized guests.  This includes activities such as starting, stopping
+and migrating guests between host servers, configuring and manipulating
+networking, and managing storage for use by guests.
+
+The libvirt client libraries and utilities connect to this daemon to issue
+tasks and collect information about the configuration and resources of the host
+system and guests.
+
+By default, the libvirtd daemon listens for requests on a local Unix domain
+socket.  Using the B<-l>|B<--listen> command line option, the libvirtd daemon
+can be instructed to additionally listen on a TCP/IP socket.  The TCP/IP socket
+to use is defined in the libvirtd configuration file.
+
+Restarting libvirtd does not impact running guests.  Guests continue to operate
+and will be picked up automatically if their XML configuration has been
+defined.  Any guests whose XML configuration has not been defined will be lost
+from the configuration.
+
+=head1 OPTIONS
+
+=over
+
+=item B<-d, --daemon>
+
+Run as a daemon & write PID file.
+
+=item B<-f, --config> I<FILE>
+
+Use this configuration file, overriding the default value.
+
+=item B<-l, --listen>
+
+Listen for TCP/IP connections.
+
+=item B<-p, --pid-file> I<FILE>
+
+Use this name for the PID file, overriding the default value.
+
+=item B<-t, --timeout> I<SECONDS>
+
+Exit after timeout period (in seconds) expires.
+
+=item B<-v, --verbose>
+
+Enable output of verbose messages.
+
+=item B<    --version>
+
+Display version information then exit.
+
+=back
+
+=head1 SIGNALS
+
+On receipt of B<SIGHUP> libvirtd will reload its configuration.
+
+=head1 FILES
+
+=over
+
+=item F<@sysconfdir@/libvirtd.conf>
+
+The default configuration file used by libvirtd, unless overridden on the
+command line using the B<-f>|B<--config> option.
+
+=item F<@localstatedir@/run/libvirt/libvirt-sock>
+
+=item F<@localstatedir@/run/libvirt/libvirt-sock-ro>
+
+The sockets libvirtd will use when B<run as root>.
+
+=item F<$HOME/.libvirt/libvirt-sock>
+
+The socket libvirtd will use when run as a B<non-root> user.
+
+=item F<@sysconfdir@/pki/CA/cacert.pem>
+
+The TLS B<Certificate Authority> certificate libvirtd will use.
+
+=item F<@sysconfdir@/pki/libvirt/servercert.pem>
+
+The TLS B<Server> certificate libvirtd will use.
+
+=item F<@sysconfdir@/pki/libvirt/private/serverkey.pem>
+
+The TLS B<Server> private key libvirtd will use.
+
+=item F<@remote_pid_file@>
+
+The PID file to use, unless overridden by the B<-p>|B<--pid-file> option.
+
+=back
+
+=head1 EXAMPLES
+
+To retrieve the version of libvirtd:
+
+ # libvirtd --version
+ libvirtd (libvirt) 0.8.2
+ #
+
+To start libvirtd, instructing it to daemonize and create a PID file:
+
+ # libvirtd -d
+ # ls -la @remote_pid_file@
+ -rw-r--r-- 1 root root 6 Jul  9 02:40 @remote_pid_file@
+ #
+
+=head1 BUGS
+
+Please report all bugs you discover.  This should be done via either:
+
+=over
+
+=item a) the mailing list
+
+L<http://libvirt.org/contact.html>
+
+=item or,
+
+B<>
+
+=item b) the bug tracker
+
+L<http://libvirt.org/bugs.html>
+
+=item Alternatively, you may report bugs to your software distributor / vendor.
+
+=back
+
+=head1 AUTHORS
+
+Please refer to the AUTHORS file distributed with libvirt.
+
+=head1 COPYRIGHT
+
+Copyright (C) 2006-2010 Red Hat, Inc., and the authors listed in the
+libvirt AUTHORS file.
+
+=head1 LICENSE
+
+libvirtd is distributed under the terms of the GNU LGPL v2.1+.
+This is free software; see the source for copying conditions. There
+is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
+PURPOSE
+
+=head1 SEE ALSO
+
+L<virsh(1)>, L<virt-install(1)>, L<virt-xml-validate(1)>, L<virt-top(1)>,
+L<virt-df(1)>, L<http://www.libvirt.org/>
+
+=cut
--- a/daemon/libvirtd.policy-0
+++ b/daemon/libvirtd.policy-0
@@ -0,0 +1,42 @@
+<!DOCTYPE policyconfig PUBLIC
+ "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/PolicyKit/1.0/policyconfig.dtd">
+
+<!--
+Policy definitions for libvirt daemon
+
+Copyright (c) 2007 Daniel P. Berrange <berrange redhat com>
+
+libvirt is licensed to you under the GNU Lesser General Public License
+version 2. See COPYING for details.
+
+NOTE: If you make changes to this file, make sure to validate the file
+using the polkit-policy-file-validate(1) tool. Changes made to this
+file are instantly applied.
+-->
+
+<policyconfig>
+    <action id="org.libvirt.unix.monitor">
+      <description>Monitor local virtualized systems</description>
+      <message>System policy prevents monitoring of local virtualized systems</message>
+      <defaults>
+        <!-- Any program can use libvirt in read-only mode for monitoring,
+             even if not part of a session -->
+        <allow_any>yes</allow_any>
+        <allow_inactive>yes</allow_inactive>
+        <allow_active>yes</allow_active>
+      </defaults>
+    </action>
+
+    <action id="org.libvirt.unix.manage">
+      <description>Manage local virtualized systems</description>
+      <message>System policy prevents management of local virtualized systems</message>
+      <defaults>
+        <!-- Only a program in the active host session can use libvirt in
+             read-write mode for management, and we require user password -->
+        <allow_any>auth_admin</allow_any>
+        <allow_inactive>auth_admin</allow_inactive>
+        <allow_active>auth_admin_keep_session</allow_active>
+      </defaults>
+    </action>
+</policyconfig>
--- a/daemon/libvirtd.policy-1
+++ b/daemon/libvirtd.policy-1
@@ -0,0 +1,42 @@
+<!DOCTYPE policyconfig PUBLIC
+ "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/PolicyKit/1.0/policyconfig.dtd">
+
+<!--
+Policy definitions for libvirt daemon
+
+Copyright (c) 2007 Daniel P. Berrange <berrange redhat com>
+
+libvirt is licensed to you under the GNU Lesser General Public License
+version 2. See COPYING for details.
+
+NOTE: If you make changes to this file, make sure to validate the file
+using the polkit-policy-file-validate(1) tool. Changes made to this
+file are instantly applied.
+-->
+
+<policyconfig>
+    <action id="org.libvirt.unix.monitor">
+      <description>Monitor local virtualized systems</description>
+      <message>System policy prevents monitoring of local virtualized systems</message>
+      <defaults>
+        <!-- Any program can use libvirt in read-only mode for monitoring,
+             even if not part of a session -->
+        <allow_any>yes</allow_any>
+        <allow_inactive>yes</allow_inactive>
+        <allow_active>yes</allow_active>
+      </defaults>
+    </action>
+
+    <action id="org.libvirt.unix.manage">
+      <description>Manage local virtualized systems</description>
+      <message>System policy prevents management of local virtualized systems</message>
+      <defaults>
+        <!-- Only a program in the active host session can use libvirt in
+             read-write mode for management, and we require user password -->
+        <allow_any>auth_admin</allow_any>
+        <allow_inactive>auth_admin</allow_inactive>
+        <allow_active>auth_admin_keep</allow_active>
+      </defaults>
+    </action>
+</policyconfig>
--- a/daemon/libvirtd.qemu.logrotate.in
+++ b/daemon/libvirtd.qemu.logrotate.in
@@ -0,0 +1,9 @@
+@localstatedir@/log/libvirt/qemu/*.log {
+        weekly
+        missingok
+        rotate 4
+        compress
+        delaycompress
+        copytruncate
+        minsize 100k
+}
--- a/daemon/libvirtd.sasl
+++ b/daemon/libvirtd.sasl
@@ -0,0 +1,28 @@
+# If you want to use the non-TLS socket, then you *must* include
+# the GSSAPI or DIGEST-MD5 mechanisms, because they are the only
+# ones that can offer session encryption as well as authentication.
+#
+# If you're only using TLS, then you can turn on any mechanisms
+# you like for authentication, because TLS provides the encryption
+#
+# Default to a simple username+password mechanism
+mech_list: digest-md5
+
+# Before you can use GSSAPI, you need a service principle on the
+# KDC server for libvirt, and that to be exported to the keytab
+# file listed below
+#mech_list: gssapi
+#
+# You can also list many mechanisms at once, then the user can choose
+# by adding  '?auth=sasl.gssapi' to their libvirt URI, eg
+#   qemu+tcp://hostname/system?auth=sasl.gssapi
+#mech_list: digest-md5 gssapi
+
+# MIT kerberos ignores this option & needs KRB5_KTNAME env var.
+# May be useful for other non-Linux OS though....
+keytab: /etc/libvirt/krb5.tab
+
+# If using digest-md5 for username/passwds, then this is the file
+# containing the passwds. Use 'saslpasswd2 -a libvirt [username]'
+# to add entries, and 'sasldblistusers2 -a libvirt' to browse it
+sasldb_path: /etc/libvirt/passwd.db
--- a/daemon/libvirtd.service.in
+++ b/daemon/libvirtd.service.in
@@ -0,0 +1,23 @@
+# NB we don't use socket activation. When libvirtd starts it will
+# spawn any virtual machines registered for autostart. We want this
+# to occur on every boot, regardless of whether any client connects
+# to a socket. Thus socket activation doesn't have any benefit
+
+[Unit]
+Description=Virtualization daemon
+After=syslog.target
+After=udev.target
+After=avahi.target
+After=dbus.target
+Before=libvirt-guests.service
+
+[Service]
+EnvironmentFile=-/etc/sysconfig/libvirtd
+ExecStart=@sbindir@/libvirtd $LIBVIRTD_ARGS
+ExecReload=/bin/kill -HUP $MAINPID
+KillMode=process
+# Override the maximum number of opened files
+#LimitNOFILE=2048
+
+[Install]
+WantedBy=multi-user.target
--- a/daemon/libvirtd.sysconf
+++ b/daemon/libvirtd.sysconf
@@ -0,0 +1,24 @@
+# Override the default config file
+# NOTE: This setting is no longer honoured if using
+# systemd. Set '--config /etc/libvirt/libvirtd.conf'
+# in LIBVIRTD_ARGS instead.
+#LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf
+
+# Listen for TCP/IP connections
+# NB. must setup TLS/SSL keys prior to using this
+#LIBVIRTD_ARGS="--listen"
+
+# Override Kerberos service keytab for SASL/GSSAPI
+#KRB5_KTNAME=/etc/libvirt/krb5.tab
+
+# Override the QEMU/SDL default audio driver probing when
+# starting virtual machines using SDL graphics
+#
+# NB these have no effect for VMs using VNC, unless vnc_allow_host_audio
+# is enabled in /etc/libvirt/qemu.conf
+#QEMU_AUDIO_DRV=sdl
+#
+#SDL_AUDIODRIVER=pulse
+
+# Override the maximum number of opened files
+#LIBVIRTD_NOFILES_LIMIT=2048
--- a/src/remote/libvirtd.sysctl
+++ b/src/remote/libvirtd.sysctl
--- a/daemon/libvirtd.uml.logrotate.in
+++ b/daemon/libvirtd.uml.logrotate.in
@@ -0,0 +1,9 @@
+@localstatedir@/log/libvirt/uml/*.log {
+        weekly
+        missingok
+        rotate 4
+        compress
+        delaycompress
+        copytruncate
+        minsize 100k
+}
--- a/daemon/libvirtd.upstart
+++ b/daemon/libvirtd.upstart
@@ -0,0 +1,47 @@
+# libvirtd upstart job
+#
+# XXX wait for rc to get all dependent initscripts started
+# from sysv libvirtd initscript: Required-Start: $network messagebus
+start on stopped rc RUNLEVEL=[345]
+stop on runlevel [!345]
+
+respawn
+
+script
+    LIBVIRTD_CONFIG=
+    LIBVIRTD_ARGS=
+    KRB5_KTNAME=/etc/libvirt/krb5.tab
+
+    if [ -f /etc/sysconfig/libvirtd ]; then
+        . /etc/sysconfig/libvirtd
+    fi
+
+    export QEMU_AUDIO_DRV
+    export SDL_AUDIODRIVER
+    export KRB5_KTNAME
+
+    LIBVIRTD_CONFIG_ARGS=
+    if [ -n "$LIBVIRTD_CONFIG" ]; then
+        LIBVIRTD_CONFIG_ARGS="--config $LIBVIRTD_CONFIG"
+    fi
+
+    # DAEMON_COREFILE_LIMIT from /etc/sysconfig/libvirtd is not handled
+    # automatically
+    if [ -n "$DAEMON_COREFILE_LIMIT" ]; then
+        ulimit -c "$DAEMON_COREFILE_LIMIT"
+    fi
+
+    # LIBVIRTD_NOFILES_LIMIT from /etc/sysconfig/libvirtd is not handled
+    # automatically
+    if [ -n "$LIBVIRTD_NOFILES_LIMIT" ]; then
+        ulimit -n "$LIBVIRTD_NOFILES_LIMIT"
+    fi
+    mkdir -p /var/cache/libvirt
+    rm -rf /var/cache/libvirt/*
+
+    exec /usr/sbin/libvirtd $LIBVIRTD_CONFIG_ARGS $LIBVIRTD_ARGS
+end script
+
+post-stop script
+    rm -rf /var/cache/libvirt/*
+end script
--- a/daemon/remote.c
+++ b/daemon/remote.c
--- a/daemon/remote.h
+++ b/daemon/remote.h
@@ -0,0 +1,41 @@
+/*
+ * remote.h: handlers for RPC method calls
+ *
+ * Copyright (C) 2007, 2008, 2009 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+ *
+ * Author: Richard W.M. Jones <rjones@redhat.com>
+ * Author: Daniel P. Berrange <berrange@redhat.com>
+ */
+
+#ifndef __LIBVIRTD_REMOTE_H__
+# define __LIBVIRTD_REMOTE_H__
+
+# include "remote_protocol.h"
+# include "rpc/virnetserverprogram.h"
+# include "rpc/virnetserverclient.h"
+
+
+extern virNetServerProgramProc remoteProcs[];
+extern size_t remoteNProcs;
+
+extern virNetServerProgramProc qemuProcs[];
+extern size_t qemuNProcs;
+
+int remoteClientInitHook(virNetServerPtr srv,
+                         virNetServerClientPtr client);
+
+#endif /* __LIBVIRTD_REMOTE_H__ */
--- a/daemon/stream.c
+++ b/daemon/stream.c
@@ -0,0 +1,782 @@
+/*
+ * stream.c: APIs for managing client streams
+ *
+ * Copyright (C) 2009, 2011 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+ *
+ * Author: Daniel P. Berrange <berrange@redhat.com>
+ */
+
+
+#include <config.h>
+
+#include "stream.h"
+#include "remote.h"
+#include "memory.h"
+#include "logging.h"
+#include "virnetserverclient.h"
+#include "virterror_internal.h"
+
+#define VIR_FROM_THIS VIR_FROM_STREAMS
+
+#define virNetError(code, ...)                                    \
+    virReportErrorHelper(VIR_FROM_THIS, code, __FILE__,           \
+                         __FUNCTION__, __LINE__, __VA_ARGS__)
+
+struct daemonClientStream {
+    daemonClientPrivatePtr priv;
+    int refs;
+
+    virNetServerProgramPtr prog;
+
+    virStreamPtr st;
+    int procedure;
+    int serial;
+
+    unsigned int recvEOF : 1;
+    unsigned int closed : 1;
+
+    int filterID;
+
+    virNetMessagePtr rx;
+    int tx;
+
+    daemonClientStreamPtr next;
+};
+
+static int
+daemonStreamHandleWrite(virNetServerClientPtr client,
+                        daemonClientStream *stream);
+static int
+daemonStreamHandleRead(virNetServerClientPtr client,
+                       daemonClientStream *stream);
+static int
+daemonStreamHandleFinish(virNetServerClientPtr client,
+                         daemonClientStream *stream,
+                         virNetMessagePtr msg);
+static int
+daemonStreamHandleAbort(virNetServerClientPtr client,
+                        daemonClientStream *stream,
+                        virNetMessagePtr msg);
+
+
+
+static void
+daemonStreamUpdateEvents(daemonClientStream *stream)
+{
+    int newEvents = 0;
+    if (stream->rx)
+        newEvents |= VIR_STREAM_EVENT_WRITABLE;
+    if (stream->tx && !stream->recvEOF)
+        newEvents |= VIR_STREAM_EVENT_READABLE;
+
+    virStreamEventUpdateCallback(stream->st, newEvents);
+}
+
+/*
+ * Invoked when an outgoing data packet message has been fully sent.
+ * This simply re-enables TX of further data.
+ *
+ * The idea is to stop the daemon growing without bound due to
+ * fast stream, but slow client
+ */
+static void
+daemonStreamMessageFinished(virNetMessagePtr msg ATTRIBUTE_UNUSED,
+                            void *opaque)
+{
+    daemonClientStream *stream = opaque;
+    VIR_DEBUG("stream=%p proc=%d serial=%d",
+              stream, msg->header.proc, msg->header.serial);
+
+    stream->tx = 1;
+    daemonStreamUpdateEvents(stream);
+
+    daemonFreeClientStream(NULL, stream);
+}
+
+
+static void
+daemonStreamEventFreeFunc(void *opaque)
+{
+    virNetServerClientPtr client = opaque;
+
+    virNetServerClientFree(client);
+}
+
+/*
+ * Callback that gets invoked when a stream becomes writable/readable
+ */
+static void
+daemonStreamEvent(virStreamPtr st, int events, void *opaque)
+{
+    virNetServerClientPtr client = opaque;
+    daemonClientStream *stream;
+    daemonClientPrivatePtr priv = virNetServerClientGetPrivateData(client);
+
+    virMutexLock(&priv->lock);
+
+    stream = priv->streams;
+    while (stream) {
+        if (stream->st == st)
+            break;
+        stream = stream->next;
+    }
+
+    if (!stream) {
+        VIR_WARN("event for client=%p stream st=%p, but missing stream state", client, st);
+        virStreamEventRemoveCallback(st);
+        goto cleanup;
+    }
+
+    VIR_DEBUG("st=%p events=%d EOF=%d closed=%d", st, events, stream->recvEOF, stream->closed);
+
+    if (!stream->closed &&
+        (events & VIR_STREAM_EVENT_WRITABLE)) {
+        if (daemonStreamHandleWrite(client, stream) < 0) {
+            daemonRemoveClientStream(client, stream);
+            virNetServerClientClose(client);
+            goto cleanup;
+        }
+    }
+
+    if (!stream->closed && !stream->recvEOF &&
+        (events & (VIR_STREAM_EVENT_READABLE))) {
+        events = events & ~(VIR_STREAM_EVENT_READABLE);
+        if (daemonStreamHandleRead(client, stream) < 0) {
+            daemonRemoveClientStream(client, stream);
+            virNetServerClientClose(client);
+            goto cleanup;
+        }
+    }
+
+    /* If we have a completion/abort message, always process it */
+    if (stream->rx) {
+        virNetMessagePtr msg = stream->rx;
+        switch (msg->header.status) {
+        case VIR_NET_CONTINUE:
+            /* nada */
+            break;
+        case VIR_NET_OK:
+            virNetMessageQueueServe(&stream->rx);
+            if (daemonStreamHandleFinish(client, stream, msg) < 0) {
+                virNetMessageFree(msg);
+                daemonRemoveClientStream(client, stream);
+                virNetServerClientClose(client);
+                goto cleanup;
+            }
+            break;
+        case VIR_NET_ERROR:
+        default:
+            virNetMessageQueueServe(&stream->rx);
+            if (daemonStreamHandleAbort(client, stream, msg) < 0) {
+                virNetMessageFree(msg);
+                daemonRemoveClientStream(client, stream);
+                virNetServerClientClose(client);
+                goto cleanup;
+            }
+            break;
+        }
+    }
+
+
+    /* If we got HANGUP, we need to only send an empty
+     * packet so the client sees an EOF and cleans up
+     */
+    if (!stream->closed && !stream->recvEOF &&
+        (events & VIR_STREAM_EVENT_HANGUP)) {
+        virNetMessagePtr msg;
+        events &= ~(VIR_STREAM_EVENT_HANGUP);
+        stream->tx = 0;
+        stream->recvEOF = 1;
+        if (!(msg = virNetMessageNew(false))) {
+            daemonRemoveClientStream(client, stream);
+            virNetServerClientClose(client);
+            goto cleanup;
+        }
+        msg->cb = daemonStreamMessageFinished;
+        msg->opaque = stream;
+        stream->refs++;
+        if (virNetServerProgramSendStreamData(remoteProgram,
+                                              client,
+                                              msg,
+                                              stream->procedure,
+                                              stream->serial,
+                                              "", 0) < 0) {
+            virNetMessageFree(msg);
+            daemonRemoveClientStream(client, stream);
+            virNetServerClientClose(client);
+            goto cleanup;
+        }
+    }
+
+    if (!stream->closed &&
+        (events & (VIR_STREAM_EVENT_ERROR | VIR_STREAM_EVENT_HANGUP))) {
+        int ret;
+        virNetMessagePtr msg;
+        virNetMessageError rerr;
+
+        memset(&rerr, 0, sizeof(rerr));
+        stream->closed = 1;
+        virStreamEventRemoveCallback(stream->st);
+        virStreamAbort(stream->st);
+        if (events & VIR_STREAM_EVENT_HANGUP)
+            virNetError(VIR_ERR_RPC,
+                        "%s", _("stream had unexpected termination"));
+        else
+            virNetError(VIR_ERR_RPC,
+                        "%s", _("stream had I/O failure"));
+
+        msg = virNetMessageNew(false);
+        if (!msg) {
+            ret = -1;
+        } else {
+            ret = virNetServerProgramSendStreamError(remoteProgram,
+                                                     client,
+                                                     msg,
+                                                     &rerr,
+                                                     stream->procedure,
+                                                     stream->serial);
+        }
+        daemonRemoveClientStream(client, stream);
+        if (ret < 0)
+            virNetServerClientClose(client);
+        goto cleanup;
+    }
+
+    if (stream->closed) {
+        daemonRemoveClientStream(client, stream);
+    } else {
+        daemonStreamUpdateEvents(stream);
+    }
+
+cleanup:
+    virMutexUnlock(&priv->lock);
+}
+
+
+/*
+ * @client: a locked client object
+ *
+ * Invoked by the main loop when filtering incoming messages.
+ *
+ * Returns 1 if the message was processed, 0 if skipped,
+ * -1 on fatal client error
+ */
+static int
+daemonStreamFilter(virNetServerClientPtr client ATTRIBUTE_UNUSED,
+                   virNetMessagePtr msg,
+                   void *opaque)
+{
+    daemonClientStream *stream = opaque;
+    int ret = 0;
+
+    virMutexLock(&stream->priv->lock);
+
+    if (msg->header.type != VIR_NET_STREAM)
+        goto cleanup;
+
+    if (!virNetServerProgramMatches(stream->prog, msg))
+        goto cleanup;
+
+    if (msg->header.proc != stream->procedure ||
+        msg->header.serial != stream->serial)
+        goto cleanup;
+
+    VIR_DEBUG("Incoming client=%p, rx=%p, serial=%d, proc=%d, status=%d",
+              client, stream->rx, msg->header.proc,
+              msg->header.serial, msg->header.status);
+
+    virNetMessageQueuePush(&stream->rx, msg);
+    daemonStreamUpdateEvents(stream);
+    ret = 1;
+
+cleanup:
+    virMutexUnlock(&stream->priv->lock);
+    return ret;
+}
+
+
+/*
+ * @conn: a connection object to associate the stream with
+ * @header: the method call to associate with the stream
+ *
+ * Creates a new stream for this conn
+ *
+ * Returns a new stream object, or NULL upon OOM
+ */
+daemonClientStream *
+daemonCreateClientStream(virNetServerClientPtr client,
+                         virStreamPtr st,
+                         virNetServerProgramPtr prog,
+                         virNetMessageHeaderPtr header)
+{
+    daemonClientStream *stream;
+    daemonClientPrivatePtr priv = virNetServerClientGetPrivateData(client);
+
+    VIR_DEBUG("client=%p, proc=%d, serial=%d, st=%p",
+              client, header->proc, header->serial, st);
+
+    if (VIR_ALLOC(stream) < 0) {
+        virReportOOMError();
+        return NULL;
+    }
+
+    stream->refs = 1;
+    stream->priv = priv;
+    stream->prog = prog;
+    stream->procedure = header->proc;
+    stream->serial = header->serial;
+    stream->filterID = -1;
+    stream->st = st;
+
+    virNetServerProgramRef(prog);
+
+    return stream;
+}
+
+/*
+ * @stream: an unused client stream
+ *
+ * Frees the memory associated with this inactive client
+ * stream
+ */
+int daemonFreeClientStream(virNetServerClientPtr client,
+                           daemonClientStream *stream)
+{
+    virNetMessagePtr msg;
+    int ret = 0;
+
+    if (!stream)
+        return 0;
+
+    stream->refs--;
+    if (stream->refs)
+        return 0;
+
+    VIR_DEBUG("client=%p, proc=%d, serial=%d",
+              client, stream->procedure, stream->serial);
+
+    virNetServerProgramFree(stream->prog);
+
+    msg = stream->rx;
+    while (msg) {
+        virNetMessagePtr tmp = msg->next;
+        if (client) {
+            /* Send a dummy reply to free up 'msg' & unblock client rx */
+            virNetMessageClear(msg);
+            msg->header.type = VIR_NET_REPLY;
+            if (virNetServerClientSendMessage(client, msg) < 0) {
+                virNetServerClientImmediateClose(client);
+                virNetMessageFree(msg);
+                ret = -1;
+            }
+        } else {
+            virNetMessageFree(msg);
+        }
+        msg = tmp;
+    }
+
+    virStreamFree(stream->st);
+    VIR_FREE(stream);
+
+    return ret;
+}
+
+
+/*
+ * @client: a locked client to add the stream to
+ * @stream: a stream to add
+ */
+int daemonAddClientStream(virNetServerClientPtr client,
+                          daemonClientStream *stream,
+                          bool transmit)
+{
+    VIR_DEBUG("client=%p, proc=%d, serial=%d, st=%p, transmit=%d",
+              client, stream->procedure, stream->serial, stream->st, transmit);
+    daemonClientPrivatePtr priv = virNetServerClientGetPrivateData(client);
+
+    if (stream->filterID != -1) {
+        VIR_WARN("Filter already added to client %p", client);
+        return -1;
+    }
+
+    if (virStreamEventAddCallback(stream->st, 0,
+                                  daemonStreamEvent, client,
+                                  daemonStreamEventFreeFunc) < 0)
+        return -1;
+
+    virNetServerClientRef(client);
+    if ((stream->filterID = virNetServerClientAddFilter(client,
+                                                        daemonStreamFilter,
+                                                        stream)) < 0) {
+        virStreamEventRemoveCallback(stream->st);
+        return -1;
+    }
+
+    if (transmit)
+        stream->tx = 1;
+
+    virMutexLock(&priv->lock);
+    stream->next = priv->streams;
+    priv->streams = stream;
+
+    daemonStreamUpdateEvents(stream);
+
+    virMutexUnlock(&priv->lock);
+
+    return 0;
+}
+
+
+/*
+ * @client: a locked client object
+ * @stream: an inactive, closed stream object
+ *
+ * Removes a stream from the list of active streams for the client
+ *
+ * Returns 0 if the stream was removd, -1 if it doesn't exist
+ */
+int
+daemonRemoveClientStream(virNetServerClientPtr client,
+                         daemonClientStream *stream)
+{
+    VIR_DEBUG("client=%p, proc=%d, serial=%d, st=%p",
+              client, stream->procedure, stream->serial, stream->st);
+    daemonClientPrivatePtr priv = virNetServerClientGetPrivateData(client);
+    daemonClientStream *curr = priv->streams;
+    daemonClientStream *prev = NULL;
+
+    if (stream->filterID != -1) {
+        virNetServerClientRemoveFilter(client,
+                                       stream->filterID);
+        stream->filterID = -1;
+    }
+
+    if (!stream->closed) {
+        virStreamEventRemoveCallback(stream->st);
+        virStreamAbort(stream->st);
+    }
+
+    while (curr) {
+        if (curr == stream) {
+            if (prev)
+                prev->next = curr->next;
+            else
+                priv->streams = curr->next;
+            return daemonFreeClientStream(client, stream);
+        }
+        prev = curr;
+        curr = curr->next;
+    }
+    return -1;
+}
+
+
+void
+daemonRemoveAllClientStreams(daemonClientStream *stream)
+{
+    daemonClientStream *tmp;
+
+    VIR_DEBUG("stream=%p", stream);
+
+    while (stream) {
+        tmp = stream->next;
+
+        if (!stream->closed) {
+            virStreamEventRemoveCallback(stream->st);
+            virStreamAbort(stream->st);
+        }
+
+        daemonFreeClientStream(NULL, stream);
+
+        VIR_DEBUG("next stream=%p", tmp);
+        stream = tmp;
+    }
+}
+
+/*
+ * Returns:
+ *   -1  if fatal error occurred
+ *    0  if message was fully processed
+ *    1  if message is still being processed
+ */
+static int
+daemonStreamHandleWriteData(virNetServerClientPtr client,
+                            daemonClientStream *stream,
+                            virNetMessagePtr msg)
+{
+    int ret;
+
+    VIR_DEBUG("client=%p, stream=%p, proc=%d, serial=%d, len=%zu, offset=%zu",
+              client, stream, msg->header.proc, msg->header.serial,
+              msg->bufferLength, msg->bufferOffset);
+
+    ret = virStreamSend(stream->st,
+                        msg->buffer + msg->bufferOffset,
+                        msg->bufferLength - msg->bufferOffset);
+
+    if (ret > 0) {
+        msg->bufferOffset += ret;
+
+        /* Partial write, so indicate we have more todo later */
+        if (msg->bufferOffset < msg->bufferLength)
+            return 1;
+    } else if (ret == -2) {
+        /* Blocking, so indicate we have more todo later */
+        return 1;
+    } else {
+        virNetMessageError rerr;
+
+        memset(&rerr, 0, sizeof(rerr));
+
+        VIR_INFO("Stream send failed");
+        stream->closed = 1;
+        return virNetServerProgramSendReplyError(stream->prog,
+                                                 client,
+                                                 msg,
+                                                 &rerr,
+                                                 &msg->header);
+    }
+
+    return 0;
+}
+
+
+/*
+ * Process a finish handshake from the client.
+ *
+ * Returns a VIR_NET_OK confirmation if successful, or a VIR_NET_ERROR
+ * if there was a stream error
+ *
+ * Returns 0 if successfully sent RPC reply, -1 upon fatal error
+ */
+static int
+daemonStreamHandleFinish(virNetServerClientPtr client,
+                         daemonClientStream *stream,
+                         virNetMessagePtr msg)
+{
+    int ret;
+
+    VIR_DEBUG("client=%p, stream=%p, proc=%d, serial=%d",
+              client, stream, msg->header.proc, msg->header.serial);
+
+    stream->closed = 1;
+    virStreamEventRemoveCallback(stream->st);
+    ret = virStreamFinish(stream->st);
+
+    if (ret < 0) {
+        virNetMessageError rerr;
+        memset(&rerr, 0, sizeof(rerr));
+        return virNetServerProgramSendReplyError(stream->prog,
+                                                 client,
+                                                 msg,
+                                                 &rerr,
+                                                 &msg->header);
+    } else {
+        /* Send zero-length confirm */
+        return virNetServerProgramSendStreamData(stream->prog,
+                                                 client,
+                                                 msg,
+                                                 stream->procedure,
+                                                 stream->serial,
+                                                 NULL, 0);
+    }
+}
+
+
+/*
+ * Process an abort request from the client.
+ *
+ * Returns 0 if successfully aborted, -1 upon error
+ */
+static int
+daemonStreamHandleAbort(virNetServerClientPtr client,
+                        daemonClientStream *stream,
+                        virNetMessagePtr msg)
+{
+    VIR_DEBUG("client=%p, stream=%p, proc=%d, serial=%d",
+              client, stream, msg->header.proc, msg->header.serial);
+    virNetMessageError rerr;
+
+    memset(&rerr, 0, sizeof(rerr));
+
+    stream->closed = 1;
+    virStreamEventRemoveCallback(stream->st);
+    virStreamAbort(stream->st);
+
+    if (msg->header.status == VIR_NET_ERROR)
+        virNetError(VIR_ERR_RPC,
+                    "%s", _("stream aborted at client request"));
+    else {
+        VIR_WARN("unexpected stream status %d", msg->header.status);
+        virNetError(VIR_ERR_RPC,
+                    _("stream aborted with unexpected status %d"),
+                    msg->header.status);
+    }
+
+    return virNetServerProgramSendReplyError(remoteProgram,
+                                             client,
+                                             msg,
+                                             &rerr,
+                                             &msg->header);
+}
+
+
+
+/*
+ * Called when the stream is signalled has being able to accept
+ * data writes. Will process all pending incoming messages
+ * until they're all gone, or I/O blocks
+ *
+ * Returns 0 on success, or -1 upon fatal error
+ */
+static int
+daemonStreamHandleWrite(virNetServerClientPtr client,
+                        daemonClientStream *stream)
+{
+    VIR_DEBUG("client=%p, stream=%p", client, stream);
+
+    while (stream->rx && !stream->closed) {
+        virNetMessagePtr msg = stream->rx;
+        int ret;
+
+        switch (msg->header.status) {
+        case VIR_NET_OK:
+            ret = daemonStreamHandleFinish(client, stream, msg);
+            break;
+
+        case VIR_NET_CONTINUE:
+            ret = daemonStreamHandleWriteData(client, stream, msg);
+            break;
+
+        case VIR_NET_ERROR:
+        default:
+            ret = daemonStreamHandleAbort(client, stream, msg);
+            break;
+        }
+
+        if (ret > 0)
+            break;  /* still processing data from msg */
+
+        virNetMessageQueueServe(&stream->rx);
+        if (ret < 0) {
+            virNetMessageFree(msg);
+            virNetServerClientImmediateClose(client);
+            return -1;
+        }
+
+        /* 'CONTINUE' messages don't send a reply (unless error
+         * occurred), so to release the 'msg' object we need to
+         * send a fake zero-length reply. Nothing actually gets
+         * onto the wire, but this causes the client to reset
+         * its active request count / throttling
+         */
+        if (msg->header.status == VIR_NET_CONTINUE) {
+            virNetMessageClear(msg);
+            msg->header.type = VIR_NET_REPLY;
+            if (virNetServerClientSendMessage(client, msg) < 0) {
+                virNetMessageFree(msg);
+                virNetServerClientImmediateClose(client);
+                return -1;
+            }
+        }
+    }
+
+    return 0;
+}
+
+
+
+/*
+ * Invoked when a stream is signalled as having data
+ * available to read. This reads upto one message
+ * worth of data, and then queues that for transmission
+ * to the client.
+ *
+ * Returns 0 if data was queued for TX, or a error RPC
+ * was sent, or -1 on fatal error, indicating client should
+ * be killed
+ */
+static int
+daemonStreamHandleRead(virNetServerClientPtr client,
+                       daemonClientStream *stream)
+{
+    char *buffer;
+    size_t bufferLen = VIR_NET_MESSAGE_PAYLOAD_MAX;
+    int ret;
+
+    VIR_DEBUG("client=%p, stream=%p tx=%d closed=%d",
+              client, stream, stream->tx, stream->closed);
+
+    /* We might have had an event pending before we shut
+     * down the stream, so if we're marked as closed,
+     * then do nothing
+     */
+    if (stream->closed)
+        return 0;
+
+    /* Shouldn't ever be called unless we're marked able to
+     * transmit, but doesn't hurt to check */
+    if (!stream->tx)
+        return 0;
+
+    if (VIR_ALLOC_N(buffer, bufferLen) < 0)
+        return -1;
+
+    ret = virStreamRecv(stream->st, buffer, bufferLen);
+    if (ret == -2) {
+        /* Should never get this, since we're only called when we know
+         * we're readable, but hey things change... */
+        ret = 0;
+    } else if (ret < 0) {
+        virNetMessagePtr msg;
+        virNetMessageError rerr;
+
+        memset(&rerr, 0, sizeof(rerr));
+
+        if (!(msg = virNetMessageNew(false)))
+            ret = -1;
+        else
+            ret = virNetServerProgramSendStreamError(remoteProgram,
+                                                     client,
+                                                     msg,
+                                                     &rerr,
+                                                     stream->procedure,
+                                                     stream->serial);
+    } else {
+        virNetMessagePtr msg;
+        stream->tx = 0;
+        if (ret == 0)
+            stream->recvEOF = 1;
+        if (!(msg = virNetMessageNew(false)))
+            ret = -1;
+
+        if (msg) {
+            msg->cb = daemonStreamMessageFinished;
+            msg->opaque = stream;
+            stream->refs++;
+            ret = virNetServerProgramSendStreamData(remoteProgram,
+                                                    client,
+                                                    msg,
+                                                    stream->procedure,
+                                                    stream->serial,
+                                                    buffer, ret);
+        }
+    }
+
+    VIR_FREE(buffer);
+    return ret;
+}
--- a/daemon/stream.h
+++ b/daemon/stream.h
@@ -0,0 +1,51 @@
+/*
+ * stream.h: APIs for managing client streams
+ *
+ * Copyright (C) 2009 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+ *
+ * Author: Daniel P. Berrange <berrange@redhat.com>
+ */
+
+
+#ifndef __LIBVIRTD_STREAM_H__
+# define __LIBVIRTD_STREAM_H__
+
+# include "libvirtd.h"
+
+
+
+daemonClientStream *
+daemonCreateClientStream(virNetServerClientPtr client,
+                         virStreamPtr st,
+                         virNetServerProgramPtr prog,
+                         virNetMessageHeaderPtr hdr);
+
+int daemonFreeClientStream(virNetServerClientPtr client,
+                           daemonClientStream *stream);
+
+int daemonAddClientStream(virNetServerClientPtr client,
+                          daemonClientStream *stream,
+                          bool transmit);
+
+int
+daemonRemoveClientStream(virNetServerClientPtr client,
+                         daemonClientStream *stream);
+
+void
+daemonRemoveAllClientStreams(daemonClientStream *stream);
+
+#endif /* __LIBVIRTD_STREAM_H__ */
--- a/daemon/test_libvirtd.aug
+++ b/daemon/test_libvirtd.aug
@@ -0,0 +1,553 @@
+module Test_libvirtd =
+   let conf = "# Master libvirt daemon configuration file
+#
+# For further information consult http://libvirt.org/format.html
+
+
+#################################################################
+#
+# Network connectivity controls
+#
+
+# Flag listening for secure TLS connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# It is necessary to setup a CA and issue server certificates before
+# using this capability.
+#
+# This is enabled by default, uncomment this to disable it
+listen_tls = 0
+
+# Listen for unencrypted TCP connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# Using the TCP socket requires SASL authentication by default. Only
+# SASL mechanisms which support data encryption are allowed. This is
+# DIGEST_MD5 and GSSAPI (Kerberos5)
+#
+# This is disabled by default, uncomment this to enable it.
+listen_tcp = 1
+
+
+
+# Override the port for accepting secure TLS connections
+# This can be a port number, or service name
+#
+tls_port = \"16514\"
+
+# Override the port for accepting insecure TCP connections
+# This can be a port number, or service name
+#
+tcp_port = \"16509\"
+
+
+# Override the default configuration which binds to all network
+# interfaces. This can be a numeric IPv4/6 address, or hostname
+#
+listen_addr = \"192.168.0.1\"
+
+
+# Flag toggling mDNS advertizement of the libvirt service.
+#
+# Alternatively can disable for all services on a host by
+# stopping the Avahi daemon
+#
+# This is disabled by default, uncomment this to enable it
+mdns_adv = 1
+
+# Override the default mDNS advertizement name. This must be
+# unique on the immediate broadcast network.
+#
+# The default is \"Virtualization Host HOSTNAME\", where HOSTNAME
+# is subsituted for the short hostname of the machine (without domain)
+#
+mdns_name = \"Virtualization Host Joe Demo\"
+
+
+#################################################################
+#
+# UNIX socket access controls
+#
+
+# Set the UNIX domain socket group ownership. This can be used to
+# allow a 'trusted' set of users access to management capabilities
+# without becoming root.
+#
+# This is restricted to 'root' by default.
+unix_sock_group = \"libvirt\"
+
+# Set the UNIX socket permissions for the R/O socket. This is used
+# for monitoring VM status only
+#
+# Default allows any user. If setting group ownership may want to
+# restrict this to:
+unix_sock_ro_perms = \"0777\"
+
+# Set the UNIX socket permissions for the R/W socket. This is used
+# for full management of VMs
+#
+# Default allows only root. If PolicyKit is enabled on the socket,
+# the default will change to allow everyone (eg, 0777)
+#
+# If not using PolicyKit and setting group ownership for access
+# control then you may want to relax this to:
+unix_sock_rw_perms = \"0770\"
+
+
+
+#################################################################
+#
+# Authentication.
+#
+#  - none: do not perform auth checks. If you can connect to the
+#          socket you are allowed. This is suitable if there are
+#          restrictions on connecting to the socket (eg, UNIX
+#          socket permissions), or if there is a lower layer in
+#          the network providing auth (eg, TLS/x509 certificates)
+#
+#  - sasl: use SASL infrastructure. The actual auth scheme is then
+#          controlled from /etc/sasl2/libvirt.conf. For the TCP
+#          socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+#          For non-TCP or TLS sockets,  any scheme is allowed.
+#
+#  - polkit: use PolicyKit to authenticate. This is only suitable
+#            for use on the UNIX sockets. The default policy will
+#            require a user to supply their own password to gain
+#            full read/write access (aka sudo like), while anyone
+#            is allowed read/only access.
+#
+# Set an authentication scheme for UNIX read-only sockets
+# By default socket permissions allow anyone to connect
+#
+# To restrict monitoring of domains you may wish to enable
+# an authentication mechanism here
+auth_unix_ro = \"none\"
+
+# Set an authentication scheme for UNIX read-write sockets
+# By default socket permissions only allow root. If PolicyKit
+# support was compiled into libvirt, the default will be to
+# use 'polkit' auth.
+#
+# If the unix_sock_rw_perms are changed you may wish to enable
+# an authentication mechanism here
+auth_unix_rw = \"none\"
+
+# Change the authentication scheme for TCP sockets.
+#
+# If you don't enable SASL, then all TCP traffic is cleartext.
+# Don't do this outside of a dev/test scenario. For real world
+# use, always enable SASL and use the GSSAPI or DIGEST-MD5
+# mechanism in /etc/sasl2/libvirt.conf
+auth_tcp = \"sasl\"
+
+# Change the authentication scheme for TLS sockets.
+#
+# TLS sockets already have encryption provided by the TLS
+# layer, and limited authentication is done by certificates
+#
+# It is possible to make use of any SASL authentication
+# mechanism as well, by using 'sasl' for this option
+auth_tls = \"none\"
+
+
+
+#################################################################
+#
+# TLS x509 certificate configuration
+#
+
+
+# Override the default server key file path
+#
+key_file = \"/etc/pki/libvirt/private/serverkey.pem\"
+
+# Override the default server certificate file path
+#
+cert_file = \"/etc/pki/libvirt/servercert.pem\"
+
+# Override the default CA certificate path
+#
+ca_file = \"/etc/pki/CA/cacert.pem\"
+
+# Specify a certificate revocation list.
+#
+# Defaults to not using a CRL, uncomment to enable it
+crl_file = \"/etc/pki/CA/crl.pem\"
+
+
+
+#################################################################
+#
+# Authorization controls
+#
+
+
+# Flag to disable verification of client certificates
+#
+# Client certificate verification is the primary authentication mechanism.
+# Any client which does not present a certificate signed by the CA
+# will be rejected.
+#
+# Default is to always verify. Uncommenting this will disable
+# verification - make sure an IP whitelist is set
+tls_no_verify_certificate = 1
+tls_no_sanity_certificate = 1
+
+
+# A whitelist of allowed x509  Distinguished Names
+# This list may contain wildcards such as
+#
+#    \"C=GB,ST=London,L=London,O=Red Hat,CN=*\"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no DN's are checked
+   tls_allowed_dn_list = [\"DN1\", \"DN2\"]
+
+
+# A whitelist of allowed SASL usernames. The format for usernames
+# depends on the SASL authentication mechanism. Kerberos usernames
+# look like username@REALM
+#
+# This list may contain wildcards such as
+#
+#    \"*@EXAMPLE.COM\"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no Username's are checked
+sasl_allowed_username_list = [
+  \"joe@EXAMPLE.COM\",
+  \"fred@EXAMPLE.COM\"
+]
+
+
+#################################################################
+#
+# Processing controls
+#
+
+# The maximum number of concurrent client connections to allow
+# over all sockets combined.
+max_clients = 20
+
+
+# The minimum limit sets the number of workers to start up
+# initially. If the number of active clients exceeds this,
+# then more threads are spawned, upto max_workers limit.
+# Typically you'd want max_workers to equal maximum number
+# of clients allowed
+min_workers = 5
+max_workers = 20
+
+# Total global limit on concurrent RPC calls. Should be
+# at least as large as max_workers. Beyond this, RPC requests
+# will be read into memory and queued. This directly impact
+# memory usage, currently each request requires 256 KB of
+# memory. So by default upto 5 MB of memory is used
+max_requests = 20
+
+# Limit on concurrent requests from a single client
+# connection. To avoid one client monopolizing the server
+# this should be a small fraction of the global max_requests
+# and max_workers parameter
+max_client_requests = 5
+
+# Logging level:
+log_level = 4
+
+# Logging outputs:
+log_outputs=\"4:stderr\"
+
+# Logging filters:
+log_filters=\"a\"
+
+# Auditing:
+audit_level = 2
+"
+
+   test Libvirtd.lns get conf =
+        { "#comment" = "Master libvirt daemon configuration file" }
+        { "#comment" = "" }
+        { "#comment" = "For further information consult http://libvirt.org/format.html" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "################################################################" }
+        { "#comment" = "" }
+        { "#comment" = "Network connectivity controls" }
+        { "#comment" = "" }
+        { "#empty" }
+        { "#comment" = "Flag listening for secure TLS connections on the public TCP/IP port." }
+        { "#comment" = "NB, must pass the --listen flag to the libvirtd process for this to" }
+        { "#comment" = "have any effect." }
+        { "#comment" = "" }
+        { "#comment" = "It is necessary to setup a CA and issue server certificates before" }
+        { "#comment" = "using this capability." }
+        { "#comment" = "" }
+        { "#comment" = "This is enabled by default, uncomment this to disable it" }
+        { "listen_tls" = "0" }
+        { "#empty" }
+        { "#comment" = "Listen for unencrypted TCP connections on the public TCP/IP port." }
+        { "#comment" = "NB, must pass the --listen flag to the libvirtd process for this to" }
+        { "#comment" = "have any effect." }
+        { "#comment" = "" }
+        { "#comment" = "Using the TCP socket requires SASL authentication by default. Only" }
+        { "#comment" = "SASL mechanisms which support data encryption are allowed. This is" }
+        { "#comment" = "DIGEST_MD5 and GSSAPI (Kerberos5)" }
+        { "#comment" = "" }
+        { "#comment" = "This is disabled by default, uncomment this to enable it." }
+        { "listen_tcp" = "1" }
+        { "#empty" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "Override the port for accepting secure TLS connections" }
+        { "#comment" = "This can be a port number, or service name" }
+        { "#comment" = "" }
+        { "tls_port" = "16514" }
+        { "#empty" }
+        { "#comment" = "Override the port for accepting insecure TCP connections" }
+        { "#comment" = "This can be a port number, or service name" }
+        { "#comment" = "" }
+        { "tcp_port" = "16509" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "Override the default configuration which binds to all network" }
+        { "#comment" = "interfaces. This can be a numeric IPv4/6 address, or hostname" }
+        { "#comment" = "" }
+        { "listen_addr" = "192.168.0.1" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "Flag toggling mDNS advertizement of the libvirt service." }
+        { "#comment" = "" }
+        { "#comment" = "Alternatively can disable for all services on a host by" }
+        { "#comment" = "stopping the Avahi daemon" }
+        { "#comment" = "" }
+        { "#comment" = "This is disabled by default, uncomment this to enable it" }
+        { "mdns_adv" = "1" }
+        { "#empty" }
+        { "#comment" = "Override the default mDNS advertizement name. This must be" }
+        { "#comment" = "unique on the immediate broadcast network." }
+        { "#comment" = "" }
+        { "#comment" = "The default is \"Virtualization Host HOSTNAME\", where HOSTNAME" }
+        { "#comment" = "is subsituted for the short hostname of the machine (without domain)" }
+        { "#comment" = "" }
+        { "mdns_name" = "Virtualization Host Joe Demo" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "################################################################" }
+        { "#comment" = "" }
+        { "#comment" = "UNIX socket access controls" }
+        { "#comment" = "" }
+        { "#empty" }
+        { "#comment" = "Set the UNIX domain socket group ownership. This can be used to" }
+        { "#comment" = "allow a 'trusted' set of users access to management capabilities" }
+        { "#comment" = "without becoming root." }
+        { "#comment" = "" }
+        { "#comment" = "This is restricted to 'root' by default." }
+        { "unix_sock_group" = "libvirt" }
+        { "#empty" }
+        { "#comment" = "Set the UNIX socket permissions for the R/O socket. This is used" }
+        { "#comment" = "for monitoring VM status only" }
+        { "#comment" = "" }
+        { "#comment" = "Default allows any user. If setting group ownership may want to" }
+        { "#comment" = "restrict this to:" }
+        { "unix_sock_ro_perms" = "0777" }
+        { "#empty" }
+        { "#comment" = "Set the UNIX socket permissions for the R/W socket. This is used" }
+        { "#comment" = "for full management of VMs" }
+        { "#comment" = "" }
+        { "#comment" = "Default allows only root. If PolicyKit is enabled on the socket," }
+        { "#comment" = "the default will change to allow everyone (eg, 0777)" }
+        { "#comment" = "" }
+        { "#comment" = "If not using PolicyKit and setting group ownership for access" }
+        { "#comment" = "control then you may want to relax this to:" }
+        { "unix_sock_rw_perms" = "0770" }
+        { "#empty" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "################################################################" }
+        { "#comment" = "" }
+        { "#comment" = "Authentication." }
+        { "#comment" = "" }
+        { "#comment" = "- none: do not perform auth checks. If you can connect to the" }
+        { "#comment" = "socket you are allowed. This is suitable if there are" }
+        { "#comment" = "restrictions on connecting to the socket (eg, UNIX" }
+        { "#comment" = "socket permissions), or if there is a lower layer in" }
+        { "#comment" = "the network providing auth (eg, TLS/x509 certificates)" }
+        { "#comment" = "" }
+        { "#comment" = "- sasl: use SASL infrastructure. The actual auth scheme is then" }
+        { "#comment" = "controlled from /etc/sasl2/libvirt.conf. For the TCP" }
+        { "#comment" = "socket only GSSAPI & DIGEST-MD5 mechanisms will be used." }
+        { "#comment" = "For non-TCP or TLS sockets,  any scheme is allowed." }
+        { "#comment" = "" }
+        { "#comment" = "- polkit: use PolicyKit to authenticate. This is only suitable" }
+        { "#comment" = "for use on the UNIX sockets. The default policy will" }
+        { "#comment" = "require a user to supply their own password to gain" }
+        { "#comment" = "full read/write access (aka sudo like), while anyone" }
+        { "#comment" = "is allowed read/only access." }
+        { "#comment" = "" }
+        { "#comment" = "Set an authentication scheme for UNIX read-only sockets" }
+        { "#comment" = "By default socket permissions allow anyone to connect" }
+        { "#comment" = "" }
+        { "#comment" = "To restrict monitoring of domains you may wish to enable" }
+        { "#comment" = "an authentication mechanism here" }
+        { "auth_unix_ro" = "none" }
+        { "#empty" }
+        { "#comment" = "Set an authentication scheme for UNIX read-write sockets" }
+        { "#comment" = "By default socket permissions only allow root. If PolicyKit" }
+        { "#comment" = "support was compiled into libvirt, the default will be to" }
+        { "#comment" = "use 'polkit' auth." }
+        { "#comment" = "" }
+        { "#comment" = "If the unix_sock_rw_perms are changed you may wish to enable" }
+        { "#comment" = "an authentication mechanism here" }
+        { "auth_unix_rw" = "none" }
+        { "#empty" }
+        { "#comment" = "Change the authentication scheme for TCP sockets." }
+        { "#comment" = "" }
+        { "#comment" = "If you don't enable SASL, then all TCP traffic is cleartext." }
+        { "#comment" = "Don't do this outside of a dev/test scenario. For real world" }
+        { "#comment" = "use, always enable SASL and use the GSSAPI or DIGEST-MD5" }
+        { "#comment" = "mechanism in /etc/sasl2/libvirt.conf" }
+        { "auth_tcp" = "sasl" }
+        { "#empty" }
+        { "#comment" = "Change the authentication scheme for TLS sockets." }
+        { "#comment" = "" }
+        { "#comment" = "TLS sockets already have encryption provided by the TLS" }
+        { "#comment" = "layer, and limited authentication is done by certificates" }
+        { "#comment" = "" }
+        { "#comment" = "It is possible to make use of any SASL authentication" }
+        { "#comment" = "mechanism as well, by using 'sasl' for this option" }
+        { "auth_tls" = "none" }
+        { "#empty" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "################################################################" }
+        { "#comment" = "" }
+        { "#comment" = "TLS x509 certificate configuration" }
+        { "#comment" = "" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "Override the default server key file path" }
+        { "#comment" = "" }
+        { "key_file" = "/etc/pki/libvirt/private/serverkey.pem" }
+        { "#empty" }
+        { "#comment" = "Override the default server certificate file path" }
+        { "#comment" = "" }
+        { "cert_file" = "/etc/pki/libvirt/servercert.pem" }
+        { "#empty" }
+        { "#comment" = "Override the default CA certificate path" }
+        { "#comment" = "" }
+        { "ca_file" = "/etc/pki/CA/cacert.pem" }
+        { "#empty" }
+        { "#comment" = "Specify a certificate revocation list." }
+        { "#comment" = "" }
+        { "#comment" = "Defaults to not using a CRL, uncomment to enable it" }
+        { "crl_file" = "/etc/pki/CA/crl.pem" }
+        { "#empty" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "################################################################" }
+        { "#comment" = "" }
+        { "#comment" = "Authorization controls" }
+        { "#comment" = "" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "Flag to disable verification of client certificates" }
+        { "#comment" = "" }
+        { "#comment" = "Client certificate verification is the primary authentication mechanism." }
+        { "#comment" = "Any client which does not present a certificate signed by the CA" }
+        { "#comment" = "will be rejected." }
+        { "#comment" = "" }
+        { "#comment" = "Default is to always verify. Uncommenting this will disable" }
+        { "#comment" = "verification - make sure an IP whitelist is set" }
+        { "tls_no_verify_certificate" = "1" }
+        { "tls_no_sanity_certificate" = "1" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "A whitelist of allowed x509  Distinguished Names" }
+        { "#comment" = "This list may contain wildcards such as" }
+        { "#comment" = "" }
+        { "#comment" = "\"C=GB,ST=London,L=London,O=Red Hat,CN=*\"" }
+        { "#comment" = "" }
+        { "#comment" = "See the POSIX fnmatch function for the format of the wildcards." }
+        { "#comment" = "" }
+        { "#comment" = "NB If this is an empty list, no client can connect, so comment out" }
+        { "#comment" = "entirely rather than using empty list to disable these checks" }
+        { "#comment" = "" }
+        { "#comment" = "By default, no DN's are checked" }
+        { "tls_allowed_dn_list"
+             { "1" = "DN1"}
+             { "2" = "DN2"}
+        }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "A whitelist of allowed SASL usernames. The format for usernames" }
+        { "#comment" = "depends on the SASL authentication mechanism. Kerberos usernames" }
+        { "#comment" = "look like username@REALM" }
+        { "#comment" = "" }
+        { "#comment" = "This list may contain wildcards such as" }
+        { "#comment" = "" }
+        { "#comment" = "\"*@EXAMPLE.COM\"" }
+        { "#comment" = "" }
+        { "#comment" = "See the POSIX fnmatch function for the format of the wildcards." }
+        { "#comment" = "" }
+        { "#comment" = "NB If this is an empty list, no client can connect, so comment out" }
+        { "#comment" = "entirely rather than using empty list to disable these checks" }
+        { "#comment" = "" }
+        { "#comment" = "By default, no Username's are checked" }
+        { "sasl_allowed_username_list"
+             { "1" = "joe@EXAMPLE.COM" }
+             { "2" = "fred@EXAMPLE.COM" }
+        }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "################################################################"}
+        { "#comment" = ""}
+        { "#comment" = "Processing controls"}
+        { "#comment" = ""}
+        { "#empty" }
+        { "#comment" = "The maximum number of concurrent client connections to allow"}
+        { "#comment" = "over all sockets combined."}
+        { "max_clients" = "20" }
+        { "#empty" }
+        { "#empty" }
+        { "#comment" = "The minimum limit sets the number of workers to start up"}
+        { "#comment" = "initially. If the number of active clients exceeds this,"}
+        { "#comment" = "then more threads are spawned, upto max_workers limit."}
+        { "#comment" = "Typically you'd want max_workers to equal maximum number"}
+        { "#comment" = "of clients allowed"}
+        { "min_workers" = "5" }
+        { "max_workers" = "20" }
+	{ "#empty" }
+        { "#comment" = "Total global limit on concurrent RPC calls. Should be" }
+        { "#comment" = "at least as large as max_workers. Beyond this, RPC requests" }
+        { "#comment" = "will be read into memory and queued. This directly impact" }
+        { "#comment" = "memory usage, currently each request requires 256 KB of" }
+        { "#comment" = "memory. So by default upto 5 MB of memory is used" }
+        { "max_requests" = "20" }
+	{ "#empty" }
+        { "#comment" = "Limit on concurrent requests from a single client" }
+        { "#comment" = "connection. To avoid one client monopolizing the server" }
+        { "#comment" = "this should be a small fraction of the global max_requests" }
+        { "#comment" = "and max_workers parameter" }
+        { "max_client_requests" = "5" }
+	{ "#empty" }
+        { "#comment" = "Logging level:" }
+        { "log_level" = "4" }
+	{ "#empty" }
+        { "#comment" = "Logging outputs:" }
+        { "log_outputs" = "4:stderr" }
+	{ "#empty" }
+        { "#comment" = "Logging filters:" }
+        { "log_filters" = "a" }
+	{ "#empty" }
+        { "#comment" = "Auditing:" }
+        { "audit_level" = "2" }
--- a/docs/32favicon.png
+++ b/docs/32favicon.png
--- a/docs/404.html.in
+++ b/docs/404.html.in
@@ -1,19 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
-  <body>
-    <h1>404 page not found</h1>
-
-    <p>
-      Someone appears to have eaten the <del>penguin</del>
-      page you were looking for. You might want to try
-    </p>
-    <ul>
-      <li>going back to the <a href="https://libvirt.org/">home page</a> to find
-        a collection of links to interesting pages on this site</li>
-      <li>using the search box at the top right corner of the screen to
-        locate the content on this site or mailing list archives</li>
-    </ul>
-
-  </body>
-</html>
--- a/docs/Makefile.am
+++ b/docs/Makefile.am
@@ -1,347 +1,96 @@
 ## Process this file with automake to produce Makefile.in

-## Copyright (C) 2005-2016 Red Hat, Inc.
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library.  If not, see
-## <http://www.gnu.org/licenses/>.
+## Copyright (C) 2005-2011 Red Hat, Inc.
+## See COPYING.LIB for the License of this software

-HTML_DIR = $(docdir)/html
+SUBDIRS= schemas

-modules = \
-	libvirt-common \
-	libvirt-domain \
-	libvirt-domain-checkpoint \
-	libvirt-domain-snapshot \
-	libvirt-event \
-	libvirt-host \
-	libvirt-interface \
-	libvirt-network \
-	libvirt-nodedev \
-	libvirt-nwfilter \
-	libvirt-secret \
-	libvirt-storage \
-	libvirt-stream \
-	virterror \
-	$(NULL)
+PERL = perl

-modules_admin = libvirt-admin
-modules_qemu = libvirt-qemu
-modules_lxc = libvirt-lxc
+# The directory containing the source code (if it contains documentation).
+DOC_SOURCE_DIR=../src

-all: vpathhack
+DEVHELP_DIR=$(datadir)/gtk-doc/html/libvirt

-# This hack enables us to view the web pages
-# from within the uninstalled build tree
-vpathhack:
-	@for dir in fonts js logos; \
-	do \
-	  test -e $$dir || ln -s $(srcdir)/$$dir $$dir ; \
-	done
-	@for file in $(assets); \
-	do \
-	  test -e $$file || ln -s $(srcdir)/$$file $$file ; \
-	done
+BUILT_SOURCES=hvsupport.html.in

-clean-local:
-	for dir in fonts js logos; \
-	do \
-	  rm -f $$dir ; \
-	done
-	for file in $(assets); \
-	do \
-	  rm -f $$file ; \
-	done
+apihtml =			\
+  html/index.html		\
+  html/libvirt-libvirt.html	\
+  html/libvirt-virterror.html

-apihtml = \
-  html/index.html \
-  $(apihtml_generated)
-
-apihtml_generated = \
-	$(addprefix html/libvirt-,$(addsuffix .html,$(modules))) \
-	$(NULL)
-
-apiadminhtml = \
-  html/index-admin.html \
-  $(apiadminhtml_generated)
-
-apiadminhtml_generated = \
-	$(addprefix html/libvirt-,$(addsuffix .html,$(modules_admin))) \
-	$(NULL)
-
-apiqemuhtml = \
-  html/index-qemu.html \
-  $(apiqemuhtml_generated)
-
-apiqemuhtml_generated = \
-	$(addprefix html/libvirt-,$(addsuffix .html,$(modules_qemu))) \
-	$(NULL)
-
-apilxchtml = \
-  html/index-lxc.html \
-  $(apilxchtml_generated)
-
-apilxchtml_generated = \
-	$(addprefix html/libvirt-,$(addsuffix .html,$(modules_lxc))) \
-	$(NULL)
-
-apipng = \
-  html/left.png \
-  html/up.png \
-  html/home.png \
+apipng =	\
+  html/left.png	\
+  html/up.png	\
+  html/home.png	\
  html/right.png

-apirefdir = $(HTML_DIR)/html
-apiref_DATA = $(apihtml) $(apiadminhtml) $(apiqemuhtml) $(apilxchtml) $(apipng)
+devhelphtml =			\
+  devhelp/libvirt.devhelp	\
+  devhelp/index.html		\
+  devhelp/general.html		\
+  devhelp/libvirt-libvirt.html	\
+  devhelp/libvirt-virterror.html

-javascript = \
-  js/main.js \
-  $(NULL)
-
-javascriptdir = $(HTML_DIR)/js
-javascript_DATA = $(javascript)
-
-fonts = \
-  fonts/LICENSE.rst \
-  fonts/stylesheet.css \
-  fonts/overpass-bold-italic.woff \
-  fonts/overpass-bold.woff \
-  fonts/overpass-italic.woff \
-  fonts/overpass-light-italic.woff \
-  fonts/overpass-light.woff \
-  fonts/overpass-mono-bold.woff \
-  fonts/overpass-mono-light.woff \
-  fonts/overpass-mono-regular.woff \
-  fonts/overpass-mono-semibold.woff \
-  fonts/overpass-regular.woff
-
-fontsdir = $(HTML_DIR)/fonts
-fonts_DATA = $(fonts)
-
-logofiles = \
-  logos/logo-base.svg \
-  logos/logo-square.svg \
-  logos/logo-square-powered.svg \
-  logos/logo-banner-dark.svg \
-  logos/logo-banner-light.svg \
-  logos/logo-square-96.png \
-  logos/logo-square-128.png \
-  logos/logo-square-192.png \
-  logos/logo-square-256.png \
-  logos/logo-square-powered-96.png \
-  logos/logo-square-powered-128.png \
-  logos/logo-square-powered-192.png \
-  logos/logo-square-powered-256.png \
-  logos/logo-banner-dark-256.png \
-  logos/logo-banner-dark-800.png \
-  logos/logo-banner-light-256.png \
-  logos/logo-banner-light-800.png
-
-logofilesdir = $(HTML_DIR)/logos
-logofiles_DATA = $(logofiles)
-
-assets = \
-  android-chrome-192x192.png \
-  android-chrome-256x256.png \
-  apple-touch-icon.png \
-  architecture.gif \
-  browserconfig.xml \
-  favicon.ico \
-  favicon-16x16.png \
-  favicon-32x32.png \
+css =         \
  generic.css \
  libvirt.css \
+  main.css
+
+devhelppng =		\
+  devhelp/home.png	\
+  devhelp/left.png	\
+  devhelp/right.png	\
+  devhelp/up.png
+
+devhelpcss = devhelp/style.css
+
+devhelpxsl = devhelp/devhelp.xsl devhelp/html.xsl
+
+png = \
+  32favicon.png \
+  footer_corner.png \
+  footer_pattern.png \
+  libvirt-header-bg.png \
+  libvirt-header-logo.png \
+  libvirtLogo.png \
+  libvirt-net-logical.png \
+  libvirt-net-physical.png \
  libvirt-daemon-arch.png \
  libvirt-driver-arch.png \
  libvirt-object-model.png \
-  libvirt-virConnect-example.png \
-  main.css \
-  manifest.json \
+  madeWith.png \
+  et.png \
  migration-managed-direct.png \
  migration-managed-p2p.png \
  migration-native.png \
  migration-tunnel.png \
-  migration-unmanaged-direct.png \
-  mobile.css \
-  mstile-150x150.png \
-  node.gif \
-  $(NULL)
+  migration-unmanaged-direct.png

-internals_html_in = \
-  $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/internals/*.html.in))
-internals_rst = \
-  $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/internals/*.rst))
-internals_rst_html_in = \
-  $(internals_rst:%.rst=%.html.in)
-internals_html = \
-  $(internals_html_in:%.html.in=%.html) \
-  $(internals_rst_html_in:%.html.in=%.html)
+gif = \
+  architecture.gif \
+  node.gif

-internalsdir = $(HTML_DIR)/internals
-internals_DATA = $(internals_html)
+dot_html_in = $(notdir $(wildcard $(srcdir)/*.html.in)) todo.html.in hvsupport.html.in \
+      $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/internals/*.html.in))
+dot_html = $(dot_html_in:%.html.in=%.html)

-kbase_html_in = \
-  $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/kbase/*.html.in))
-kbase_rst = \
-  $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/kbase/*.rst))
-kbase_rst_html_in = \
-  $(kbase_rst:%.rst=%.html.in)
-kbase_html = \
-  $(kbase_html_in:%.html.in=%.html) \
-  $(kbase_rst_html_in:%.html.in=%.html)
+patches = $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/api_extension/*.patch))

-kbasedir = $(HTML_DIR)/kbase
-kbase_DATA = $(kbase_html)
+xml = \
+  libvirt-api.xml \
+  libvirt-refs.xml

-# Sync with src/util/
-KEYCODES = linux osx atset1 atset2 atset3 xtkbd usb win32 qnum
-KEYNAMES = linux osx win32
-
-manpages_rst = \
-  manpages/index.rst \
-  $(NULL)
-manpages1_rst = \
-  manpages/virt-pki-validate.rst \
-  manpages/virt-xml-validate.rst \
-  manpages/virt-admin.rst \
-  manpages/virsh.rst \
-  $(NULL)
-manpages7_rst = \
-  $(KEYCODES:%=manpages/virkeycode-%.rst) \
-  $(KEYNAMES:%=manpages/virkeyname-%.rst) \
-  $(NULL)
-manpages8_rst = $(NULL)
-manpages_rst += \
-  $(manpages1_rst) \
-  $(manpages7_rst) \
-  $(manpages8_rst) \
-  $(NULL)
-if WITH_LIBVIRTD
-manpages8_rst += \
-  manpages/libvirtd.rst \
-  manpages/virtlockd.rst \
-  manpages/virtlogd.rst \
-  $(NULL)
-else ! WITH_LIBVIRTD
-manpages_rst += \
-  manpages/libvirtd.rst \
-  manpages/virtlockd.rst \
-  manpages/virtlogd.rst \
-  $(NULL)
-endif ! WITH_LIBVIRTD
-if WITH_HOST_VALIDATE
-  manpages1_rst += manpages/virt-host-validate.rst
-else ! WITH_HOST_VALIDATE
-  manpages_rst += manpages/virt-host-validate.rst
-endif ! WITH_HOST_VALIDATE
-if WITH_LOGIN_SHELL
-  manpages1_rst += manpages/virt-login-shell.rst
-else ! WITH_LOGIN_SHELL
-  manpages_rst += manpages/virt-login-shell.rst
-endif ! WITH_LOGIN_SHELL
-if WITH_SANLOCK
-  manpages8_rst += manpages/virt-sanlock-cleanup.rst
-else ! WITH_SANLOCK
-  manpages_rst += manpages/virt-sanlock-cleanup.rst
-endif ! WITH_SANLOCK
-if WITH_QEMU
-  manpages1_rst += manpages/virt-qemu-run.rst
-else ! WITH_QEMU
-  manpages_rst += manpages/virt-qemu-run.rst
-endif ! WITH_QEMU
-manpages_rst_html_in = \
-  $(manpages_rst:%.rst=%.html.in)
-manpages_html = \
-  $(manpages_rst_html_in:%.html.in=%.html)
-
-man1_MANS = $(manpages1_rst:%.rst=%.1)
-man7_MANS = $(manpages7_rst:%.rst=%.7)
-man8_MANS = $(manpages8_rst:%.rst=%.8)
-
-%.1: %.rst
-	$(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
-	   grep -v '^\.\. contents::' < $< | \
-	   sed -e 's|SYSCONFDIR|$(sysconfdir)|g' \
-	       -e 's|RUNSTATEDIR|$(runstatedir)|g' | \
-	   $(RST2MAN) --strict > $@ || { rm $@ && exit 1; }
-
-%.7: %.rst
-	$(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
-	   grep -v '^\.\. contents::' < $< | \
-	   sed -e 's|SYSCONFDIR|$(sysconfdir)|g' \
-	       -e 's|RUNSTATEDIR|$(runstatedir)|g' | \
-	   $(RST2MAN) --strict > $@ || { rm $@ && exit 1; }
-
-%.8: %.rst
-	$(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
-	   grep -v '^\.\. contents::' < $< | \
-	   sed -e 's|SYSCONFDIR|$(sysconfdir)|g' \
-	       -e 's|RUNSTATEDIR|$(runstatedir)|g' | \
-	   $(RST2MAN) --strict > $@ || { rm $@ && exit 1; }
-
-manpages/virkeycode-%.rst: $(top_srcdir)/src/keycodemapdb/data/keymaps.csv \
-		$(top_srcdir)/src/keycodemapdb/tools/keymap-gen Makefile.am
-	$(AM_V_GEN)export NAME=`echo $@ | \
-		sed -e 's,manpages/virkeycode-,,' -e 's,\.rst,,'` && \
-		$(MKDIR_P) manpages/ && \
-		$(RUNUTF8) $(PYTHON) $(top_srcdir)/src/keycodemapdb/tools/keymap-gen \
-		code-docs \
-		--lang rst \
-		--title "virkeycode-$$NAME" \
-		--subtitle "Key code values for $$NAME" \
-		$(top_srcdir)/src/keycodemapdb/data/keymaps.csv $$NAME > $@
-
-manpages/virkeyname-%.rst: $(top_srcdir)/src/keycodemapdb/data/keymaps.csv \
-		$(top_srcdir)/src/keycodemapdb/tools/keymap-gen Makefile.am
-	$(AM_V_GEN)export NAME=`echo $@ | \
-		sed -e 's,manpages/virkeyname-,,' -e 's,\.rst,,'` && \
-		$(MKDIR_P) manpages/ && \
-		$(RUNUTF8) $(PYTHON) $(top_srcdir)/src/keycodemapdb/tools/keymap-gen \
-		name-docs \
-		--lang rst \
-		--title "virkeyname-$$NAME" \
-		--subtitle "Key name values for $$NAME" \
-		$(top_srcdir)/src/keycodemapdb/data/keymaps.csv $$NAME > $@
-
-manpagesdir = $(HTML_DIR)/manpages
-manpages_DATA = $(manpages_html)
-
-# Generate hvsupport.html and news.html first, since they take one extra step.
-dot_html_generated_in = \
-  hvsupport.html.in \
-  news.html.in
-dot_html_in = \
-  $(notdir $(wildcard $(srcdir)/*.html.in))
-dot_rst = \
-  $(notdir $(wildcard $(srcdir)/*.rst))
-dot_rst_html_in = \
-  $(dot_rst:%.rst=%.html)
-dot_html = \
-  $(dot_html_generated_in:%.html.in=%.html) \
-  $(dot_html_in:%.html.in=%.html) \
-  $(dot_rst_html_in:%.html.in=%.html)
-
-htmldir = $(HTML_DIR)
-html_DATA = $(assets) $(dot_html)
+qemu_xml = \
+  libvirt-qemu-api.xml \
+  libvirt-qemu-refs.xml

 apidir = $(pkgdatadir)/api
-api_DATA = \
-       libvirt-api.xml \
-       libvirt-qemu-api.xml \
-       libvirt-lxc-api.xml \
-       libvirt-admin-api.xml
+api_DATA = libvirt-api.xml libvirt-qemu-api.xml

 fig = \
+  libvirt-net-logical.fig \
+  libvirt-net-physical.fig \
  libvirt-daemon-arch.fig \
  libvirt-driver-arch.fig \
  libvirt-object-model.fig \
@@ -351,187 +100,141 @@ fig = \
  migration-tunnel.fig \
  migration-unmanaged-direct.fig

-schemadir = $(pkgdatadir)/schemas
-schema_DATA = $(wildcard $(srcdir)/schemas/*.rng)
+EXTRA_DIST=					\
+  apibuild.py \
+  site.xsl newapi.xsl news.xsl page.xsl \
+  hacking1.xsl hacking2.xsl wrapstring.xsl \
+  $(dot_html) $(dot_html_in) $(gif) $(apihtml) $(apipng) \
+  $(devhelphtml) $(devhelppng) $(devhelpcss) $(devhelpxsl) \
+  $(xml) $(qemu_xml) $(fig) $(png) $(css) \
+  $(patches) \
+  sitemap.html.in \
+  todo.pl hvsupport.pl todo.cfg-example

-EXTRA_DIST= \
-  site.xsl subsite.xsl newapi.xsl page.xsl \
-  wrapstring.xsl \
-  $(dot_html_in) $(dot_rst) $(apipng) \
-  $(fig) $(assets) \
-  $(javascript) $(logofiles) \
-  $(internals_html_in) $(internals_rst) $(fonts) \
-  $(kbase_html_in) $(kbase_rst) \
-  $(manpages_rst) \
-  aclperms.htmlinc \
-  $(schema_DATA)
+MAINTAINERCLEANFILES = \
+  $(addprefix $(srcdir)/,$(dot_html)) \
+  $(addprefix $(srcdir)/,$(apihtml)) \
+  $(addprefix $(srcdir)/,$(devhelphtml))

-acl_generated = aclperms.htmlinc
+all-am: web

-aclperms.htmlinc: $(top_srcdir)/src/access/viraccessperm.h \
-        $(top_srcdir)/scripts/genaclperms.py Makefile.am
-	$(AM_V_GEN)$(RUNUTF8) $(PYTHON) $(top_srcdir)/scripts/genaclperms.py $< > $@
+api: $(srcdir)/libvirt-api.xml $(srcdir)/libvirt-refs.xml
+qemu_api: $(srcdir)/libvirt-qemu-api.xml $(srcdir)/libvirt-qemu-refs.xml

-CLEANFILES = \
-  $(dot_html) \
-  $(apihtml) \
-  $(apiadminhtml) \
-  $(apiqemuhtml) \
-  $(apilxchtml) \
-  $(internals_html) \
-  $(kbase_html) \
-  $(manpages_html) \
-  $(man1_MANS) \
-  $(man7_MANS) \
-  $(manpages7_rst) \
-  $(man8_MANS) \
-  $(api_DATA) \
-  $(dot_html_generated_in) \
-  aclperms.htmlinc
+web: $(dot_html) html/index.html devhelp/index.html

-timestamp="$(shell if test -n "$$SOURCE_DATE_EPOCH"; \
-		   then \
-		     date -u --date="@$$SOURCE_DATE_EPOCH"; \
-		   else \
-		     date -u; \
-		   fi)"
+todo.html.in: todo.pl
+	if [ -f  todo.cfg ]; then \
+		echo "Generating $@"; \
+		$(PERL) $< > $@ \
+		|| { rm $@ && exit 1; }; \
+	else \
+		echo "Stubbing $@"; \
+		echo "<html><body><h1>Todo list</h1></body></html>" > $@ ; \
+	fi

-hvsupport.html: hvsupport.html.in
+todo:
+	rm -f todo.html.in
+	$(MAKE) todo.html

-hvsupport.html.in: $(top_srcdir)/scripts/hvsupport.py $(api_DATA) \
-		$(top_srcdir)/src/libvirt_public.syms \
-	$(top_srcdir)/src/libvirt_qemu.syms $(top_srcdir)/src/libvirt_lxc.syms \
-	$(top_srcdir)/src/driver.h
-	$(AM_V_GEN)$(RUNUTF8) $(PYTHON) $(top_srcdir)/scripts/hvsupport.py \
-		$(top_srcdir) $(top_builddir) > $@ || { rm $@ && exit 1; }
+hvsupport.html.in: $(srcdir)/hvsupport.pl $(srcdir)/../src/libvirt_public.syms \
+	 $(srcdir)/../src/libvirt_qemu.syms $(srcdir)/../src/driver.h
+	$(AM_V_GEN)$(PERL) $(srcdir)/hvsupport.pl $(srcdir)/../src > $@ || { rm $@ && exit 1; }

-news.html.in: \
-	  $(srcdir)/news.xml \
-	  $(srcdir)/news-html.xsl
-	$(AM_V_GEN)$(XSLTPROC) --nonet \
-	    $(srcdir)/news-html.xsl \
-	    $(srcdir)/news.xml \
-	  >$@ \
-	    || { rm -f $@; exit 1; };
-EXTRA_DIST += \
-	$(srcdir)/news.xml \
-	$(srcdir)/news.rng \
-	$(srcdir)/news-html.xsl
+.PHONY: todo

 %.png: %.fig
 	convert -rotate 90 $< $@

-manpages/%.html.in: manpages/%.rst
-	$(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
-	 grep -v '^:Manual ' < $< | \
-	  sed -e 's|SYSCONFDIR|$(sysconfdir)|g' \
-	     -e 's|RUNSTATEDIR|$(runstatedir)|g' | \
-	  $(RST2HTML) --strict > $@ || { rm $@ && exit 1; }
+internals/%.html.tmp: internals/%.html.in subsite.xsl page.xsl sitemap.html.in
+	@if [ -x $(XSLTPROC) ] ; then \
+	  echo "Generating $@"; \
+	  $(MKDIR_P) internals; \
+	  name=`echo $@ | sed -e 's/.tmp//'`; \
+	  $(XSLTPROC) --stringparam pagename $$name --nonet --html \
+	    $(top_srcdir)/docs/subsite.xsl $< > $@ \
+	    || { rm $@ && exit 1; }; fi

-%.html.in: %.rst
-	$(AM_V_GEN)$(MKDIR_P) `dirname $@` && \
-	  $(RST2HTML) --strict $< > $@ || { rm $@ && exit 1; }
-
-%.html.tmp: %.html.in site.xsl subsite.xsl page.xsl \
-		$(acl_generated)
-	$(AM_V_GEN)name=`echo $@ | sed -e 's/.tmp//'`; \
-	  genhtmlin=`echo $@ | sed -e 's/.tmp/.in/'`; \
-	  rst=`echo $@ | sed -e 's/.html.tmp/.rst/'`; \
-	  src="$$genhtmlin"; \
-	  test -f "$$genhtmlin" && src="$$rst"; \
-	  dir=`dirname $@` ; \
-	  if test "$$dir" = "."; \
-	  then \
-	    style=site.xsl; \
-	  else \
-	    $(MKDIR_P) $$dir; \
-	    style=subsite.xsl; \
-	  fi; \
-	  $(XSLTPROC) --stringparam pagename $$name \
-	    --stringparam pagesrc $$src \
-	    --stringparam builddir '$(abs_top_builddir)' \
-	    --stringparam timestamp $(timestamp) --nonet \
-	    $(top_srcdir)/docs/$$style $< > $@ \
-	    || { rm $@ && exit 1; }
+%.html.tmp: %.html.in site.xsl page.xsl sitemap.html.in
+	@if [ -x $(XSLTPROC) ] ; then \
+	  echo "Generating $@"; \
+	  name=`echo $@ | sed -e 's/.tmp//'`; \
+	  $(XSLTPROC) --stringparam pagename $$name --nonet --html \
+	    $(top_srcdir)/docs/site.xsl $< > $@ \
+	    || { rm $@ && exit 1; }; fi

 %.html: %.html.tmp
-	$(AM_V_GEN)$(XMLLINT) --nonet --format $< > $@ \
-	  || { rm $@ && exit 1; }
+	@if test -x $(XMLLINT) && test -x $(XMLCATALOG) ; then \
+	  if $(XMLCATALOG) '$(XML_CATALOG_FILE)' \
+	    "-//W3C//DTD XHTML 1.0 Strict//EN" > /dev/null ; then \
+	  echo "Validating $@" ; \
+	  SGML_CATALOG_FILES='$(XML_CATALOG_FILE)' \
+	  $(XMLLINT) --catalogs --nonet --format --valid $< > $(srcdir)/$@ \
+	  || { rm $(srcdir)/$@ && exit 1; }; \
+	  else echo "missing XHTML1 DTD" ; fi ; fi

-$(apihtml_generated): html/index.html
-$(apiadminhtml_generated): html/index-admin.html
-$(apiqemuhtml_generated): html/index-qemu.html
-$(apilxchtml_generated): html/index-lxc.html

-html/index.html: libvirt-api.xml newapi.xsl page.xsl $(APIBUILD_STAMP)
-	$(AM_V_GEN)$(XSLTPROC) --nonet -o ./ \
-	  --stringparam builddir '$(abs_top_builddir)' \
-	  --stringparam timestamp $(timestamp) \
-	  $(srcdir)/newapi.xsl libvirt-api.xml
+html/index.html: libvirt-api.xml newapi.xsl page.xsl sitemap.html.in
+	$(AM_V_GEN)if [ -x $(XSLTPROC) ] ; then \
+	  $(XSLTPROC) --nonet -o $(srcdir)/ \
+	  $(srcdir)/newapi.xsl $(srcdir)/libvirt-api.xml ; fi && \
+	if test -x $(XMLLINT) && test -x $(XMLCATALOG) ; then \
+	  if $(XMLCATALOG) '$(XML_CATALOG_FILE)' "-//W3C//DTD XHTML 1.0 Strict//EN" \
+	    > /dev/null ; then \
+	  SGML_CATALOG_FILES='$(XML_CATALOG_FILE)' \
+	  $(XMLLINT) --catalogs --nonet --valid --noout $(srcdir)/html/*.html ; \
+	  else echo "missing XHTML1 DTD" ; fi ; fi

-html/index-%.html: libvirt-%-api.xml newapi.xsl page.xsl $(APIBUILD_STAMP)
-	$(AM_V_GEN)$(XSLTPROC) --nonet -o ./ \
-	  --stringparam builddir '$(abs_top_builddir)' \
-	  --stringparam timestamp $(timestamp) \
-	  --stringparam indexfile $(@:html/%=%) \
-	  $(srcdir)/newapi.xsl $<
+$(addprefix $(srcdir)/,$(devhelphtml)): $(srcdir)/libvirt-api.xml $(devhelpxsl)
+	$(AM_V_GEN)if [ -x $(XSLTPROC) ] ; then \
+	  $(XSLTPROC) --nonet -o $(srcdir)/devhelp/ \
+	  $(top_srcdir)/docs/devhelp/devhelp.xsl $(srcdir)/libvirt-api.xml ; fi

-check-html:
-	$(XMLLINT) --nonet --noout html/*.html
-
-check-local: check-html

 python_generated_files = \
-		html/libvirt-libvirt-lxc.html \
-		html/libvirt-libvirt-qemu.html \
-		html/libvirt-libvirt-admin.html \
-		html/libvirt-virterror.html \
-		$(api_DATA) \
-		$(NULL)
+		$(srcdir)/html/libvirt-libvirt.html \
+		$(srcdir)/html/libvirt-libvirt-qemu.html \
+		$(srcdir)/html/libvirt-virterror.html \
+		$(srcdir)/libvirt-api.xml \
+		$(srcdir)/libvirt-refs.xml \
+		$(srcdir)/libvirt-qemu-api.xml \
+		$(srcdir)/libvirt-qemu-refs.xml

-APIBUILD=$(top_srcdir)/scripts/apibuild.py
-APIBUILD_STAMP=apibuild.py.stamp
-CLEANFILES += $(APIBUILD_STAMP)
+$(python_generated_files): $(srcdir)/apibuild.py \
+		$(srcdir)/../include/libvirt/*.h \
+		$(srcdir)/../src/libvirt.c \
+		$(srcdir)/../src/libvirt-qemu.c \
+		$(srcdir)/../src/util/virterror.c
+	$(AM_V_GEN)srcdir=$(srcdir) $(PYTHON) $(srcdir)/apibuild.py

-$(python_generated_files): $(APIBUILD_STAMP)
+check-local: all

-$(APIBUILD_STAMP): $(top_srcdir)/scripts/apibuild.py \
-		$(top_srcdir)/include/libvirt/libvirt.h \
-		$(top_srcdir)/include/libvirt/libvirt-common.h.in \
-		$(top_srcdir)/include/libvirt/libvirt-domain-checkpoint.h \
-		$(top_srcdir)/include/libvirt/libvirt-domain-snapshot.h \
-		$(top_srcdir)/include/libvirt/libvirt-domain.h \
-		$(top_srcdir)/include/libvirt/libvirt-event.h \
-		$(top_srcdir)/include/libvirt/libvirt-host.h \
-		$(top_srcdir)/include/libvirt/libvirt-interface.h \
-		$(top_srcdir)/include/libvirt/libvirt-network.h \
-		$(top_srcdir)/include/libvirt/libvirt-nodedev.h \
-		$(top_srcdir)/include/libvirt/libvirt-nwfilter.h \
-		$(top_srcdir)/include/libvirt/libvirt-secret.h \
-		$(top_srcdir)/include/libvirt/libvirt-storage.h \
-		$(top_srcdir)/include/libvirt/libvirt-stream.h \
-		$(top_srcdir)/include/libvirt/libvirt-lxc.h \
-		$(top_srcdir)/include/libvirt/libvirt-qemu.h \
-		$(top_srcdir)/include/libvirt/libvirt-admin.h \
-		$(top_srcdir)/include/libvirt/virterror.h \
-		$(top_srcdir)/src/libvirt.c \
-		$(top_srcdir)/src/libvirt-domain-checkpoint.c \
-		$(top_srcdir)/src/libvirt-domain-snapshot.c \
-		$(top_srcdir)/src/libvirt-domain.c \
-		$(top_srcdir)/src/libvirt-host.c \
-		$(top_srcdir)/src/libvirt-interface.c \
-		$(top_srcdir)/src/libvirt-network.c \
-		$(top_srcdir)/src/libvirt-nodedev.c \
-		$(top_srcdir)/src/libvirt-nwfilter.c \
-		$(top_srcdir)/src/libvirt-secret.c \
-		$(top_srcdir)/src/libvirt-storage.c \
-		$(top_srcdir)/src/libvirt-stream.c \
-		$(top_srcdir)/src/libvirt-lxc.c \
-		$(top_srcdir)/src/libvirt-qemu.c \
-		$(top_srcdir)/src/admin/libvirt-admin.c \
-		$(top_srcdir)/src/util/virerror.c \
-		$(top_srcdir)/src/util/virevent.c \
-		$(top_srcdir)/src/util/virtypedparam-public.c
-	$(AM_V_GEN)srcdir=$(srcdir) builddir=$(builddir) \
-		$(RUNUTF8) $(PYTHON) $(APIBUILD)
-	touch $@
+clean-local:
+	rm -f *~ *.bak *.hierarchy *.signals *-unused.txt *.html
+
+maintainer-clean-local: clean-local
+	rm -rf $(srcdir)/libvirt-api.xml $(srcdir)/libvirt-refs.xml todo.html.in hvsupport.html.in
+	rm -rf $(srcdir)/libvirt-qemu-api.xml $(srcdir)/libvirt-qemu-refs.xml
+
+rebuild: api qemu_api all
+
+install-data-local:
+	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)
+	for f in $(css) $(dot_html) $(gif) $(png); do \
+	  $(INSTALL) -m 0644 $(srcdir)/$$f $(DESTDIR)$(HTML_DIR); done
+	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)/html
+	for h in $(apihtml); do \
+	  $(INSTALL) -m 0644 $(srcdir)/$$h $(DESTDIR)$(HTML_DIR)/html; done
+	for p in $(apipng); do \
+	  $(INSTALL) -m 0644 $(srcdir)/$$p $(DESTDIR)$(HTML_DIR)/html; done
+	$(mkinstalldirs) $(DESTDIR)$(DEVHELP_DIR)
+	for file in $(devhelphtml) $(devhelppng) $(devhelpcss); do \
+	    $(INSTALL) -m 0644 $(srcdir)/$${file} $(DESTDIR)$(DEVHELP_DIR) ; \
+	done
+
+uninstall-local:
+	for h in $(apihtml); do rm $(DESTDIR)$(HTML_DIR)/$$h; done
+	for p in $(apipng); do rm $(DESTDIR)$(HTML_DIR)/$$p; done
+	for f in $(devhelphtml) $(devhelppng) $(devhelpcss); do \
+	  rm $(DESTDIR)$(DEVHELP_DIR)/$$(basename $$f); \
+	done
--- a/docs/acl.html.in
+++ b/docs/acl.html.in
@@ -1,100 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
-  <body>
-    <h1>Client access control</h1>
-    <p>
-      Libvirt's client access control framework allows administrators
-      to setup fine grained permission rules across client users,
-      managed objects and API operations. This allows client connections
-      to be locked down to a minimal set of privileges.
-    </p>
-
-    <ul id="toc"></ul>
-
-    <h2><a id="intro">Access control introduction</a></h2>
-
-    <p>
-      In a default configuration, the libvirtd daemon has three levels
-      of access control. All connections start off in an unauthenticated
-      state, where the only API operations allowed are those required
-      to complete authentication. After successful authentication, a
-      connection either has full, unrestricted access to all libvirt
-      API calls, or is locked down to only "read only" operations,
-      according to what socket a client connection originated on.
-    </p>
-
-    <p>
-      The access control framework allows authenticated connections to
-      have fine grained permission rules to be defined by the administrator.
-      Every API call in libvirt has a set of permissions that will
-      be validated against the object being used. For example, the
-      <code>virDomainSetSchedulerParametersFlags</code> method will
-      check whether the client user has the <code>write</code>
-      permission on the <code>domain</code> object instance passed
-      in as a parameter. Further permissions will also be checked
-      if certain flags are set in the API call. In addition to
-      checks on the object passed in to an API call, some methods
-      will filter their results. For example the <code>virConnectListAllDomains</code>
-      method will check the <code>search_domains</code> on the <code>connect</code>
-      object, but will also filter the returned <code>domain</code>
-      objects to only those on which the client user has the
-      <code>getattr</code> permission.
-    </p>
-
-    <h2><a id="drivers">Access control drivers</a></h2>
-
-    <p>
-      The access control framework is designed as a pluggable
-      system to enable future integration with arbitrary access
-      control technologies. By default, the <code>none</code>
-      driver is used, which does no access control checks at
-      all. At this time, libvirt ships with support for using
-      <a href="http://www.freedesktop.org/wiki/Software/polkit/">polkit</a> as a real access
-      control driver. To learn how to use the polkit access
-      driver consult <a href="aclpolkit.html">the configuration
-      docs</a>.
-    </p>
-
-    <p>
-      The access driver is configured in the <code>libvirtd.conf</code>
-      configuration file, using the <code>access_drivers</code>
-      parameter. This parameter accepts an array of access control
-      driver names. If more than one access driver is requested,
-      then all must succeed in order for access to be granted.
-      To enable 'polkit' as the driver:
-    </p>
-
-    <pre>
-# augtool -s set '/files/etc/libvirt/libvirtd.conf/access_drivers[1]' polkit
-    </pre>
-
-    <p>
-      And to reset back to the default (no-op) driver
-    </p>
-
-
-    <pre>
-# augtool -s rm /files/etc/libvirt/libvirtd.conf/access_drivers
-    </pre>
-
-    <p>
-      <strong>Note:</strong> changes to libvirtd.conf require that
-      the libvirtd daemon be restarted.
-    </p>
-
-    <h2><a id="perms">Objects and permissions</a></h2>
-
-    <p>
-      Libvirt applies access control to all the main object
-      types in its API. Each object type, in turn, has a set
-      of permissions defined. To determine what permissions
-      are checked for specific API call, consult the
-      <a href="html/index.html">API reference manual</a>
-      documentation for the API in question.
-    </p>
-
-    <div id="include" filename="aclperms.htmlinc"/>
-
-  </body>
-</html>
--- a/docs/aclpolkit.html.in
+++ b/docs/aclpolkit.html.in
@@ -1,523 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
-  <body>
-    <h1>Polkit access control</h1>
-
-    <p>
-      Libvirt's client <a href="acl.html">access control framework</a> allows
-      administrators to setup fine grained permission rules across client users,
-      managed objects and API operations. This allows client connections
-      to be locked down to a minimal set of privileges. The polkit driver
-      provides a simple implementation of the access control framework.
-    </p>
-
-    <ul id="toc"></ul>
-
-    <h2><a id="intro">Introduction</a></h2>
-
-    <p>
-      A default install of libvirt will typically use
-      <a href="http://www.freedesktop.org/wiki/Software/polkit/">polkit</a>
-      to authenticate the initial user connection to libvirtd. This is a
-      very coarse grained check though, either allowing full read-write
-      access to all APIs, or just read-only access. The polkit access
-      control driver in libvirt builds on this capability to allow for
-      fine grained control over the operations a user may perform on an
-      object.
-    </p>
-
-    <h2><a id="perms">Permission names</a></h2>
-
-    <p>
-      The libvirt <a href="acl.html#perms">object names and permission names</a>
-      are mapped onto polkit action names using the simple pattern:
-    </p>
-
-    <pre>org.libvirt.api.$object.$permission
-</pre>
-
-    <p>
-      The only caveat is that any underscore characters in the
-      object or permission names are converted to hyphens. So,
-      for example, the <code>search_storage_vols</code> permission
-      on the <code>storage_pool</code> object maps to the polkit
-      action:
-    </p>
-    <pre>org.libvirt.api.storage-pool.search-storage-vols
-</pre>
-
-    <p>
-      The default policy for any permission which corresponds to
-      a "read only" operation, is to allow access. All other
-      permissions default to deny access.
-    </p>
-
-    <h2><a id="attrs">Object identity attributes</a></h2>
-
-    <p>
-      To allow polkit authorization rules to be written to match
-      against individual object instances, libvirt provides a number
-      of authorization detail attributes when performing a permission
-      check. The set of attributes varies according to the type
-      of object being checked
-    </p>
-
-    <h3><a id="object_connect">virConnectPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_domain">virDomainPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>domain_name</td>
-          <td>Name of the domain, unique to the local host</td>
-        </tr>
-        <tr>
-          <td>domain_uuid</td>
-          <td>UUID of the domain, globally unique</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_interface">virInterfacePtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>interface_name</td>
-          <td>Name of the network interface, unique to the local host</td>
-        </tr>
-        <tr>
-          <td>interface_macaddr</td>
-          <td>MAC address of the network interface, not unique</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_network">virNetworkPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>network_name</td>
-          <td>Name of the network, unique to the local host</td>
-        </tr>
-        <tr>
-          <td>network_uuid</td>
-          <td>UUID of the network, globally unique</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_node_device">virNodeDevicePtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>node_device_name</td>
-          <td>Name of the node device, unique to the local host</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_nwfilter">virNWFilterPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>nwfilter_name</td>
-          <td>Name of the network filter, unique to the local host</td>
-        </tr>
-        <tr>
-          <td>nwfilter_uuid</td>
-          <td>UUID of the network filter, globally unique</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_secret">virSecretPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>secret_uuid</td>
-          <td>UUID of the secret, globally unique</td>
-        </tr>
-        <tr>
-          <td>secret_usage_volume</td>
-          <td>Name of the associated volume, if any</td>
-        </tr>
-        <tr>
-          <td>secret_usage_ceph</td>
-          <td>Name of the associated Ceph server, if any</td>
-        </tr>
-        <tr>
-          <td>secret_usage_target</td>
-          <td>Name of the associated iSCSI target, if any</td>
-        </tr>
-        <tr>
-          <td>secret_usage_name</td>
-          <td>Name of the associated TLS secret, if any</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_storage_pool">virStoragePoolPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>pool_name</td>
-          <td>Name of the storage pool, unique to the local host</td>
-        </tr>
-        <tr>
-          <td>pool_uuid</td>
-          <td>UUID of the storage pool, globally unique</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h3><a id="object_storage_vol">virStorageVolPtr</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Attribute</th>
-          <th>Description</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>connect_driver</td>
-          <td>Name of the libvirt connection driver</td>
-        </tr>
-        <tr>
-          <td>pool_name</td>
-          <td>Name of the storage pool, unique to the local host</td>
-        </tr>
-        <tr>
-          <td>pool_uuid</td>
-          <td>UUID of the storage pool, globally unique</td>
-        </tr>
-        <tr>
-          <td>vol_name</td>
-          <td>Name of the storage volume, unique to the pool</td>
-        </tr>
-        <tr>
-          <td>vol_key</td>
-          <td>Key of the storage volume, globally unique</td>
-        </tr>
-      </tbody>
-    </table>
-
-    <h2><a id="connect_driver">Hypervisor Driver connect_driver</a></h2>
-    <p>
-      The <code>connect_driver</code> parameter describes the
-      client's <a href="remote.html">remote Connection Driver</a>
-      name based on the <a href="uri.html">URI</a> used for the
-      connection.
-    </p>
-    <p>
-      <span class="since">Since 4.1.0</span>, when calling an API
-      outside the scope of the primary connection driver, the
-      primary driver will attempt to open a secondary connection
-      to the specific API driver in order to process the API. For
-      example, when hypervisor domain processing needs to make an
-      API call within the storage driver or the network filter driver
-      an attempt to open a connection to the "storage" or "nwfilter"
-      driver will be made. Similarly, a "storage" primary connection
-      may need to create a connection to the "secret" driver in order
-      to process secrets for the API. If successful, then calls to
-      those API's will occur in the <code>connect_driver</code> context
-      of the secondary connection driver rather than in the context of
-      the primary driver. This affects the <code>connect_driver</code>
-      returned from rule generation from the <code>action.loookup</code>
-      function. The following table provides a list of the various
-      connection drivers and the <code>connect_driver</code> name
-      used by each regardless of primary or secondary connection.
-      The access denied error message from libvirt will list the
-      connection driver by name that denied the access.
-    </p>
-
-    <h3><a id="object_connect_driver">Connection Driver Name</a></h3>
-    <table>
-      <thead>
-        <tr>
-          <th>Connection Driver</th>
-          <th><code>connect_driver</code> name</th>
-        </tr>
-      </thead>
-      <tbody>
-        <tr>
-          <td>bhyve</td>
-          <td>bhyve</td>
-        </tr>
-        <tr>
-          <td>esx</td>
-          <td>ESX</td>
-        </tr>
-        <tr>
-          <td>hyperv</td>
-          <td>Hyper-V</td>
-        </tr>
-        <tr>
-          <td>interface</td>
-          <td>interface</td>
-        </tr>
-        <tr>
-          <td>xen</td>
-          <td>Xen</td>
-        </tr>
-        <tr>
-          <td>lxc</td>
-          <td>LXC</td>
-        </tr>
-        <tr>
-          <td>network</td>
-          <td>network</td>
-        </tr>
-        <tr>
-          <td>nodedev</td>
-          <td>nodedev</td>
-        </tr>
-        <tr>
-          <td>nwfilter</td>
-          <td>NWFilter</td>
-        </tr>
-        <tr>
-          <td>openvz</td>
-          <td>OPENVZ</td>
-        </tr>
-        <tr>
-          <td>qemu</td>
-          <td>QEMU</td>
-        </tr>
-        <tr>
-          <td>secret</td>
-          <td>secret</td>
-        </tr>
-        <tr>
-          <td>storage</td>
-          <td>storage</td>
-        </tr>
-        <tr>
-          <td>vbox</td>
-          <td>VBOX</td>
-        </tr>
-        <tr>
-          <td>vmware</td>
-          <td>VMWARE</td>
-        </tr>
-        <tr>
-          <td>vz</td>
-          <td>vz</td>
-        </tr>
-      </tbody>
-    </table>
-
-
-    <h2><a id="user">User identity attributes</a></h2>
-
-    <p>
-      At this point in time, the only attribute provided by
-      libvirt to identify the user invoking the operation
-      is the PID of the client program. This means that the
-      polkit access control driver is only useful if connections
-      to libvirt are restricted to its UNIX domain socket. If
-      connections are being made to a TCP socket, no identifying
-      information is available and access will be denied.
-      Also note that if the client is connecting via an SSH
-      tunnel, it is the local SSH user that will be identified.
-      In future versions, it is expected that more information
-      about the client user will be provided, including the
-      SASL / Kerberos username and/or x509 distinguished
-      name obtained from the authentication provider in use.
-    </p>
-
-
-    <h2><a id="checks">Writing access control policies</a></h2>
-
-    <p>
-      If using versions of polkit prior to 0.106 then it is only
-      possible to validate (user, permission) pairs via the <code>.pkla</code>
-      files. Fully validation of the (user, permission, object) triple
-      requires the new JavaScript <code>.rules</code> support that
-      was introduced in version 0.106. The latter is what will be
-      described here.
-    </p>
-
-    <p>
-      Libvirt does not ship any rules files by default. It merely
-      provides a definition of the default behaviour for each
-      action (permission). As noted earlier, permissions which
-      correspond to read-only operations in libvirt will be allowed
-      to all users by default; everything else is denied by default.
-      Defining custom rules requires creation of a file in the
-      <code>/etc/polkit-1/rules.d</code> directory with a name
-      chosen by the administrator (<code>100-libvirt-acl.rules</code>
-      would be a reasonable choice). See the <code>polkit(8)</code>
-      manual page for a description of how to write these files
-      in general. The key idea is to create a file containing
-      something like
-    </p>
-
-    <pre>
-polkit.addRule(function(action, subject) {
-  ....logic to check 'action' and 'subject'...
-});
-    </pre>
-
-    <p>
-      In this code snippet above, the <code>action</code> object
-      instance will represent the libvirt permission being checked
-      along with identifying attributes for the object it is being
-      applied to. The <code>subject</code> meanwhile will identify
-      the libvirt client app (with the caveat above about it only
-      dealing with local clients connected via the UNIX socket).
-      On the <code>action</code> object, the permission name is
-      accessible via the <code>id</code> attribute, while the
-      object identifying attributes are exposed via the
-      <code>lookup</code> method.
-    </p>
-
-    <p>
-    See
-    <a href="https://libvirt.org/git/?p=libvirt.git;a=tree;f=examples/polkit;hb=HEAD">source code</a>
-    for a more complex example.
-    </p>
-
-    <h3><a id="exconnect">Example: restricting ability to connect to drivers</a></h3>
-
-    <p>
-      Consider a local user <code>berrange</code>
-      who has been granted permission to connect to libvirt in
-      full read-write mode. The goal is to only allow them to
-      use the <code>QEMU</code> driver and not the Xen or LXC
-      drivers which are also available in libvirtd.
-      To achieve this we need to write a rule which checks
-      whether the <code>connect_driver</code> attribute
-      is <code>QEMU</code>, and match on an action
-      name of <code>org.libvirt.api.connect.getattr</code>. Using
-      the javascript rules format, this ends up written as
-    </p>
-
-    <pre>
-polkit.addRule(function(action, subject) {
-    if (action.id == "org.libvirt.api.connect.getattr" &amp;&amp;
-        subject.user == "berrange") {
-          if (action.lookup("connect_driver") == 'QEMU') {
-            return polkit.Result.YES;
-          } else {
-            return polkit.Result.NO;
-          }
-    }
-});
-    </pre>
-
-    <h3><a id="exdomain">Example: restricting access to a single domain</a></h3>
-
-    <p>
-      Consider a local user <code>berrange</code>
-      who has been granted permission to connect to libvirt in
-      full read-write mode. The goal is to only allow them to
-      see the domain called <code>demo</code> on the LXC driver.
-      To achieve this we need to write a rule which checks
-      whether the <code>connect_driver</code> attribute
-      is <code>LXC</code> and the <code>domain_name</code>
-      attribute is <code>demo</code>, and match on an action
-      name of <code>org.libvirt.api.domain.getattr</code>. Using
-      the javascript rules format, this ends up written as
-    </p>
-
-    <pre>
-polkit.addRule(function(action, subject) {
-    if (action.id == "org.libvirt.api.domain.getattr" &amp;&amp;
-        subject.user == "berrange") {
-          if (action.lookup("connect_driver") == 'LXC' &amp;&amp;
-              action.lookup("domain_name") == 'demo') {
-            return polkit.Result.YES;
-          } else {
-            return polkit.Result.NO;
-          }
-    }
-});
-    </pre>
-  </body>
-</html>
--- a/docs/advanced-tests.rst
+++ b/docs/advanced-tests.rst
@@ -1,178 +0,0 @@
-=========================
-Advanced test suite usage
-=========================
-
-The basic requirement before submitting changes to libvirt is that
-
-::
-
-  $ make check
-  $ make syntax-check
-
-succeed after each commit.
-
-The libvirt test suite, however, support additional features: for
-example, it's possible to look for memory leaks and similar issues
-by running
-
-::
-
-  $ make -C tests valgrind
-
-`Valgrind <http://valgrind.org/>`__ is a test that checks for
-memory management issues, such as leaks or use of uninitialized
-variables.
-
-Some tests are skipped by default in a development environment,
-based on the time they take in comparison to the likelihood
-that those tests will turn up problems during incremental
-builds. These tests default to being run when building from a
-tarball or with the configure option --enable-expensive-tests;
-you can also force a one-time toggle of these tests by setting
-VIR_TEST_EXPENSIVE to 0 or 1 at make time, as in:
-
-::
-
-  $ make check VIR_TEST_EXPENSIVE=1
-
-If you encounter any failing tests, the VIR_TEST_DEBUG
-environment variable may provide extra information to debug the
-failures. Larger values of VIR_TEST_DEBUG may provide larger
-amounts of information:
-
-::
-
-  $ VIR_TEST_DEBUG=1 make check    (or)
-  $ VIR_TEST_DEBUG=2 make check
-
-When debugging failures during development, it is possible to
-focus in on just the failing subtests by using VIR_TEST_RANGE.
-I.e. to run all tests from 3 to 20 with the exception of tests
-6 and 16, use:
-
-::
-
-  $ VIR_TEST_DEBUG=1 VIR_TEST_RANGE=3-5,7-20,^16 ./run tests/qemuxml2argvtest
-
-Also, individual tests can be run from inside the ``tests/``
-directory, like:
-
-::
-
-  $ ./qemuxml2xmltest
-
-If you are adding new test cases, or making changes that alter
-existing test output, you can use the environment variable
-VIR_TEST_REGENERATE_OUTPUT to quickly update the saved test
-data. Of course you still need to review the changes VERY
-CAREFULLY to ensure they are correct.
-
-::
-
-  $ VIR_TEST_REGENERATE_OUTPUT=1 ./qemuxml2argvtest
-
-There is also a ``./run`` script at the top level, to make it
-easier to run programs that have not yet been installed, as
-well as to wrap invocations of various tests under gdb or
-Valgrind.
-
-When running our test suite it may happen that the test result
-is nondeterministic because of the test suite relying on a
-particular file in the system being accessible or having some
-specific value. To catch this kind of errors, the test suite
-has a module for that prints any path touched that fulfils
-constraints described above into a file. To enable it just set
-``VIR_TEST_FILE_ACCESS`` environment variable. Then
-``VIR_TEST_FILE_ACCESS_OUTPUT`` environment variable can alter
-location where the file is stored.
-
-::
-
-  $ VIR_TEST_FILE_ACCESS=1 VIR_TEST_FILE_ACCESS_OUTPUT="/tmp/file_access.txt" ./qemuxml2argvtest
-
-#. The Valgrind test should produce similar output to
-``make check``. If the output has traces within libvirt API's,
-then investigation is required in order to determine the cause
-of the issue. Output such as the following indicates some sort
-of leak:
-
-::
-
-  ==5414== 4 bytes in 1 blocks are definitely lost in loss record 3 of 89
-  ==5414==    at 0x4A0881C: malloc (vg_replace_malloc.c:270)
-  ==5414==    by 0x34DE0AAB85: xmlStrndup (in /usr/lib64/libxml2.so.2.7.8)
-  ==5414==    by 0x4CC97A6: virDomainVideoDefParseXML (domain_conf.c:7410)
-  ==5414==    by 0x4CD581D: virDomainDefParseXML (domain_conf.c:10188)
-  ==5414==    by 0x4CD8C73: virDomainDefParseNode (domain_conf.c:10640)
-  ==5414==    by 0x4CD8DDB: virDomainDefParse (domain_conf.c:10590)
-  ==5414==    by 0x41CB1D: testCompareXMLToArgvHelper (qemuxml2argvtest.c:100)
-  ==5414==    by 0x41E20F: virtTestRun (testutils.c:161)
-  ==5414==    by 0x41C7CB: mymain (qemuxml2argvtest.c:866)
-  ==5414==    by 0x41E84A: virtTestMain (testutils.c:723)
-  ==5414==    by 0x34D9021734: (below main) (in /usr/lib64/libc-2.15.so)
-
-In this example, the ``virDomainDefParseXML()`` had an error
-path where the ``virDomainVideoDefPtr video`` pointer was not
-properly disposed. By simply adding a
-``virDomainVideoDefFree(video);`` in the error path, the issue
-was resolved.
-
-Another common mistake is calling a printing function, such as
-``VIR_DEBUG()`` without initializing a variable to be printed.
-The following example involved a call which could return an
-error, but not set variables passed by reference to the call.
-The solution was to initialize the variables prior to the call.
-
-::
-
-  ==4749== Use of uninitialised value of size 8
-  ==4749==    at 0x34D904650B: _itoa_word (in /usr/lib64/libc-2.15.so)
-  ==4749==    by 0x34D9049118: vfprintf (in /usr/lib64/libc-2.15.so)
-  ==4749==    by 0x34D9108F60: __vasprintf_chk (in /usr/lib64/libc-2.15.so)
-  ==4749==    by 0x4CAEEF7: virVasprintf (stdio2.h:199)
-  ==4749==    by 0x4C8A55E: virLogVMessage (virlog.c:814)
-  ==4749==    by 0x4C8AA96: virLogMessage (virlog.c:751)
-  ==4749==    by 0x4DA0056: virNetTLSContextCheckCertKeyUsage (virnettlscontext.c:225)
-  ==4749==    by 0x4DA06DB: virNetTLSContextCheckCert (virnettlscontext.c:439)
-  ==4749==    by 0x4DA1620: virNetTLSContextNew (virnettlscontext.c:562)
-  ==4749==    by 0x4DA26FC: virNetTLSContextNewServer (virnettlscontext.c:927)
-  ==4749==    by 0x409C39: testTLSContextInit (virnettlscontexttest.c:467)
-  ==4749==    by 0x40AB8F: virtTestRun (testutils.c:161)
-
-Valgrind will also find some false positives or code paths
-which cannot be resolved by making changes to the libvirt code.
-For these paths, it is possible to add a filter to avoid the
-errors. For example:
-
-::
-
-  ==4643== 7 bytes in 1 blocks are possibly lost in loss record 4 of 20
-  ==4643==    at 0x4A0881C: malloc (vg_replace_malloc.c:270)
-  ==4643==    by 0x34D90853F1: strdup (in /usr/lib64/libc-2.15.so)
-  ==4643==    by 0x34EEC2C08A: ??? (in /usr/lib64/libnl.so.1.1)
-  ==4643==    by 0x34EEC15B81: ??? (in /usr/lib64/libnl.so.1.1)
-  ==4643==    by 0x34D8C0EE15: call_init.part.0 (in /usr/lib64/ld-2.15.so)
-  ==4643==    by 0x34D8C0EECF: _dl_init (in /usr/lib64/ld-2.15.so)
-  ==4643==    by 0x34D8C01569: ??? (in /usr/lib64/ld-2.15.so)
-
-In this instance, it is acceptable to modify the
-``tests/.valgrind.supp`` file in order to add a suppression
-filter. The filter should be unique enough to not suppress real
-leaks, but it should be generic enough to cover multiple code
-paths. The format of the entry can be found in the
-documentation found at the `Valgrind home
-page <http://valgrind.org/>`__. The following trace was added
-to ``tests/.valgrind.supp`` in order to suppress the warning:
-
-::
-
-  {
-      dlInitMemoryLeak1
-      Memcheck:Leak
-      fun:?alloc
-      ...
-      fun:call_init.part.0
-      fun:_dl_init
-      ...
-      obj:*/lib*/ld-2.*so*
-  }
--- a/docs/android-chrome-192x192.png
+++ b/docs/android-chrome-192x192.png
--- a/docs/android-chrome-256x256.png
+++ b/docs/android-chrome-256x256.png
--- a/docs/api.html.in
+++ b/docs/api.html.in
@@ -1,6 +1,5 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
+<?xml version="1.0"?>
+<html>
  <body>
    <h1>The libvirt API concepts</h1>

@@ -9,31 +8,26 @@

    <ul id="toc"></ul>

-    <h2><a id="Objects">Objects Exposed</a></h2>
-    <p> As defined in the <a href="goals.html">goals section</a>, the libvirt
-    API is designed to expose all the resources needed to manage the
-    virtualization support of recent operating systems. The first object
-    manipulated through the API is the <code>virConnectPtr</code>, which
-    represents the connection to a hypervisor. Any application using libvirt
-    is likely to start using the
-    API by calling one of <a href="html/libvirt-libvirt-host.html#virConnectOpen"
+    <h2><a name="Objects">Objects exposed</a></h2>
+    <p> As defined in the <a href="goals.html">goals section</a>, libvirt
+    API need to expose all the resources needed to manage the virtualization
+    support of recent operating systems. The first object manipulated though
+    the API is <code>virConnectPtr</code> which represent a connection to
+    an hypervisor. Any application using libvirt is likely to start using the
+    API by calling one of <a href="html/libvirt-libvirt.html#virConnectOpen"
    >the virConnectOpen functions</a>. You will note that those functions take
-    a name argument which is actually a <a href="uri.html">connection URI</a>
-    to select the right hypervisor to open.
-    A URI is needed to allow remote connections and also select between
-    different possible hypervisors. For example, on a Linux system it may be
-    possible to use both KVM and LinuxContainers on the same node. A NULL
-    name will default to a preselected hypervisor, but it's probably not a
+    a name argument which is actually an URI to select the right hypervisor to
+    open, this is needed to allow remote connections and also select between
+    different possible hypervisors (for example on a Linux system it may be
+    possible to use both KVM and LinuxContainers on the same node). A NULL
+    name will default to a preselected hypervisor but it's probably not a
    wise thing to do in most cases. See the <a href="uri.html">connection
    URI</a> page for a full descriptions of the values allowed.</p>
-    <p> OnDevice the application obtains a
-      <a href="/html/libvirt-libvirt-host.html#virConnectPtr">
-        <code>virConnectPtr</code>
-      </a>
-    connection to the hypervisor it can then use it to manage the hypervisor's
-    available domains and related virtualization
-    resources, such as storage and networking. All those are
-    exposed as first class objects and connected to the hypervisor connection
+    <p> Once the application obtained a <code class='docref'>virConnectPtr</code>
+    connection to the
+    hypervisor it can then use it to manage domains and related resources
+    available for virtualization like storage and networking. All those are
+    exposed as first class objects, and connected to the hypervisor connection
    (and the node or cluster where it is available).</p>
    <p class="image">
      <img alt="first class objects exposed by the API"
@@ -41,340 +35,92 @@
    </p>
    <p> The figure above shows the five main objects exported by the API:</p>
    <ul>
-      <li>
-        <a href="html/libvirt-libvirt-host.html#virConnectPtr">
-          <code>virConnectPtr</code>
-        </a>
-      <p>Represents the connection to a hypervisor. Use one of the
-      <a href="html/libvirt-libvirt-host.html#virConnectOpen">virConnectOpen</a>
-      functions to obtain connection to the hypervisor which is then used
-      as a parameter to other connection API's.</p></li>
-      <li>
-        <a href="html/libvirt-libvirt-domain.html#virDomainPtr">
-          <code>virDomainPtr</code>
-        </a>
-      <p>Represents one domain either active or defined (i.e. existing as
-      permanent config file and storage but not currently running on that
-      node). The function
-        <a href="html/libvirt-libvirt-domain.html#virConnectListAllDomains">
-          <code>virConnectListAllDomains</code>
-        </a>
-      lists all the domains for the hypervisor.</p></li>
-      <li>
-        <a href="html/libvirt-libvirt-network.html#virNetworkPtr">
-          <code>virNetworkPtr</code>
-        </a>
-      <p>Represents one network either active or defined (i.e. existing
-      as permanent config file and storage but not currently activated).
-      The function
-        <a href="html/libvirt-libvirt-network.html#virConnectListAllNetworks">
-          <code>virConnectListAllNetworks</code>
-        </a>
-      lists all the virtualization networks for the hypervisor.</p></li>
-      <li>
-        <a href="html/libvirt-libvirt-storage.html#virStorageVolPtr">
-          <code>virStorageVolPtr</code>
-        </a>
-      <p>Represents one storage volume generally used
+      <li>virConnectPtr: represent a connection to an hypervisor.</li>
+      <li>virDomainPtr: represent one domain either active or defined (i.e.
+      existing as permanent config file and storage but not currently running
+      on that node). The function <code class='docref'>virConnectListDomains</code>
+      allows to list all the IDs for the domains active on this hypervisor.</li>
+      <li>virNetworkPtr: represent one network either active or defined (i.e.
+      existing as permanent config file and storage but not currently activated.
+      The function <code class='docref'>virConnectListNetworks</code>
+      allows to list all the virtualization networks actived on this node.</li>
+      <li>virStorageVolPtr: represent one storage volume, usually this is used
      as a block device available to one of the domains. The function
-        <a href="html/libvirt-libvirt-storage.html#virStorageVolLookupByPath">
-          <code>virStorageVolLookupByPath</code>
-        </a>
-      finds the storage volume object based on its path on the node.</p></li>
-      <li>
-        <a href="html/libvirt-libvirt-storage.html#virStoragePoolPtr">
-          <code>virStoragePoolPtr</code>
-        </a>
-      <p>Represents a storage pool, which is a logical area
-      used to allocate and store storage volumes. The function
-        <a href="html/libvirt-libvirt-storage.html#virConnectListAllStoragePools">
-          <code>virConnectListAllStoragePools</code>
-        </a>
-      lists all of the virtualization storage pools on the hypervisor.
-      The function
-        <a href="html/libvirt-libvirt-storage.html#virStoragePoolLookupByVolume">
-          <code>virStoragePoolLookupByVolume</code>
-        </a>
-      finds the storage pool containing a given storage volume.</p></li>
+      <code class="docref">virStorageVolLookupByPath</code> allows to find
+      the object based on its path on the node.</li>
+      <li>virStoragePoolPtr: represent a storage pool, i.e. a logical area
+      which can be used to allocate and store storage volumes. The function
+      <code class="docref">virStoragePoolLookupByVolume</code> allows to find
+      the storage pool containing a given storage volume.</li>
    </ul>
-    <p> Most objects manipulated by the library can also be represented using
+    <p> Most object manipulated by the library can also be represented using
      XML descriptions. This is used primarily to create those object, but is
      also helpful to modify or save their description back.</p>
-    <p> Domains, networks, and storage pools can be either <code>active</code>
+    <p> Domains, network and storage pools can be either <code>active</code>
      i.e. either running or available for immediate use, or
      <code>defined</code> in which case they are inactive but there is
      a permanent definition available in the system for them. Based on this
-      they can be activated dynamically in order to be used.</p>
-    <p> Most objects can also be named in various ways:</p>
+      thay can be activated dynamically in order to be used.</p>
+    <p> Most kind of object can also be named in various ways:</p>
    <ul>
-      <li><code>name</code>
-      <p>A user friendly identifier but whose uniqueness
-      cannot be guaranteed between two nodes.</p></li>
-      <li><code>ID</code>
-      <p>A runtime unique identifier
-      provided by the hypervisor for one given activation of the object;
-      however, it becomes invalid once the resource is deactivated.</p></li >
-      <li><code>UUID</code>
-      <p> A 16 byte unique identifier
+      <li>by their <code>name</code>, an user friendly identifier but
+      whose unicity cannot be garanteed between two nodes.</li>
+      <li>by their <code>ID</code>, which is a runtime unique identifier
+      provided by the hypervisor for one given activation of the object,
+      but it becomes invalid once the resource is deactivated.</li >
+      <li>by their <code>UUID</code>, a 16 bytes unique identifier
      as defined in <a href="http://www.ietf.org/rfc/rfc4122.txt">RFC 4122</a>,
-      which is guaranteed to be unique for long term usage and across a
-      set of nodes.</p></li>
+      which is garanteed to be unique for long term usage and across a
+      set of nodes.</li>
    </ul>

-    <h2><a id="Functions">Functions and Naming Conventions</a></h2>
+    <h2><a name="Functions">Functions and naming
+      conventions</a></h2>
    <p> The naming of the functions present in the library is usually
-      composed by a prefix describing the object associated to the function
+      made of a prefix describing the object associated to the function
      and a verb describing the action on that object.</p>
-    <p> For each first class object you will find APIs
+    <p> For each first class object you will find apis
      for the following actions:</p>
    <ul>
-      <li><b>Lookup</b> [...LookupBy...]
-      <p>Used to perform lookups on objects by some type of identifier,
-      such as:</p>
-          <ul>
-            <li>
-              <a href="html/libvirt-libvirt-domain.html#virDomainLookupByID">
-                <code>virDomainLookupByID</code>
-              </a>
-            </li>
-            <li>
-              <a href="html/libvirt-libvirt-domain.html#virDomainLookupByName">
-                <code>virDomainLookupByName</code>
-              </a>
-            </li>
-            <li>
-              <a href="html/libvirt-libvirt-domain.html#virDomainLookupByUUID">
-                <code>virDomainLookupByUUID</code>
-              </a>
-            </li>
-            <li>
-              <a href="html/libvirt-libvirt-domain.html#virDomainLookupByUUIDString">
-                <code>virDomainLookupByUUIDString</code>
-              </a>
-            </li>
-          </ul>
-      </li>
-      <li><b>Enumeration</b> [virConnectList..., virConnectNumOf...]
-      <p>Used to enumerate a set of object available to a given
-      hypervisor connection such as:</p>
-          <ul>
-            <li>
-              <a href="html/libvirt-libvirt-domain.html#virConnectListDomains">
-                <code>virConnectListDomains</code>
-              </a>
-            </li>
-            <li>
-              <a href="html/libvirt-libvirt-domain.html#virConnectNumOfDomains">
-                <code>virConnectNumOfDomains</code>
-              </a>
-            </li>
-            <li>
-              <a href="html/libvirt-libvirt-network.html#virConnectListNetworks">
-                <code>virConnectListNetworks</code>
-              </a>
-            </li>
-            <li>
-              <a href="html/libvirt-libvirt-storage.html#virConnectListStoragePools">
-                <code>virConnectListStoragePools</code>
-              </a>
-            </li>
-          </ul>
-      </li>
-      <li><b>Description</b> [...GetInfo]
-      <p>Generic accessor providing a set of generic information about an
-      object, such as: </p>
-        <ul>
-          <li>
-            <a href="html/libvirt-libvirt-host.html#virNodeGetInfo">
-              <code>virNodeGetInfo</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainGetInfo">
-              <code>virDomainGetInfo</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-storage.html#virStoragePoolGetInfo">
-              <code>virStoragePoolGetInfo</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-storage.html#virStorageVolGetInfo">
-              <code>virStorageVolGetInfo</code>
-            </a>
-          </li>
-        </ul>
-      </li>
-      <li><b>Accessors</b> [...Get..., ...Set...]
-      <p>Specific accessors used to query or modify data for the given object,
-      such as: </p>
-        <ul>
-          <li>
-            <a href="html/libvirt-libvirt-host.html#virConnectGetType">
-              <code>virConnectGetType</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainGetMaxMemory">
-              <code>virDomainGetMaxMemory</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainSetMemory">
-              <code>virDomainSetMemory</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainGetVcpus">
-              <code>virDomainGetVcpus</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-storage.html#virStoragePoolSetAutostart">
-              <code>virStoragePoolSetAutostart</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-network.html#virNetworkGetBridgeName">
-              <code>virNetworkGetBridgeName</code>
-            </a>
-          </li>
-        </ul>
-      </li>
-      <li><b>Creation</b> [...Create, ...CreateXML]
-      <p>Used to create and start objects.  The ...CreateXML APIs will create
-      the object based on an XML description, while the ...Create APIs will
-      create the object based on existing object pointer, such as: </p>
-        <ul>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainCreate">
-              <code>virDomainCreate</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainCreateXML">
-              <code>virDomainCreateXML</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-network.html#virNetworkCreate">
-              <code>virNetworkCreate</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-network.html#virNetworkCreateXML">
-              <code>virNetworkCreateXML</code>
-            </a>
-          </li>
-        </ul>
-      </li>
-      <li><b>Destruction</b> [...Destroy]
-      <p>Used to shutdown or deactivate and destroy objects, such as: </p>
-        <ul>
-          <li>
-            <a href="html/libvirt-libvirt-domain.html#virDomainDestroy">
-              <code>virDomainDestroy</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-network.html#virNetworkDestroy">
-              <code>virNetworkDestroy</code>
-            </a>
-          </li>
-          <li>
-            <a href="html/libvirt-libvirt-storage.html#virStoragePoolDestroy">
-              <code>virStoragePoolDestroy</code>
-            </a>
-          </li>
-        </ul>
-      </li>
+      <li><b>Lookup</b>:...LookupByName,</li>
+      <li><b>Enumeration</b>:virConnectList... and virConnectNumOf...:
+        those are used to enumerate a set of object available to an given
+        hypervisor connection like:
+        <code class='docref'>virConnectListDomains</code>,
+        <code class='docref'>virConnectNumOfDomains</code>,
+        <code class='docref'>virConnectListNetworks</code>,
+        <code class='docref'>virConnectListStoragePools</code>, etc.</li>
+      <li><b>Description</b>: ...GetInfo: those are generic accessor providing
+        a set of informations about an object, they are
+        <code class='docref'>virNodeGetInfo</code>,
+        <code class='docref'>virDomainGetInfo</code>,
+        <code class='docref'>virStoragePoolGetInfo</code>,
+        <code class='docref'>virStorageVolGetInfo</code>.</li>
+      <li><b>Accessors</b>: ...Get... and ...Set...: those are more specific
+        accessors to query or modify the given object, like
+        <code class='docref'>virConnectGetType</code>,
+        <code class='docref'>virDomainGetMaxMemory</code>,
+        <code class='docref'>virDomainSetMemory</code>,
+        <code class='docref'>virDomainGetVcpus</code>,
+        <code class='docref'>virStoragePoolSetAutostart</code>,
+        <code class='docref'>virNetworkGetBridgeName</code>, etc.</li>
+      <li><b>Creation</b>: </li>
+      <li><b>Destruction</b>: ... </li>
    </ul>
-    <p>Note: functions returning vir*Ptr (like the virDomainLookup functions)
-    allocate memory which needs to be freed by the caller by the corresponding
-    vir*Free function (e.g. virDomainFree for a virDomainPtr object).
-    </p>
    <p> For more in-depth details of the storage related APIs see
      <a href="storage.html">the storage management page</a>.
    </p>
-    <h2><a id="Drivers">The libvirt Drivers</a></h2>
-    <p>Drivers are the basic building block for libvirt functionality
-    to support the capability to handle specific hypervisor driver calls.
-    Drivers are discovered and registered during connection processing as
-    part of the
-      <a href="html/libvirt-libvirt-host.html#virInitialize">
-        <code>virInitialize</code>
-      </a>
-    API. Each driver
-    has a registration API which loads up the driver specific function
-    references for the libvirt APIs to call. The following is a simplistic
-    view of the hypervisor driver mechanism. Consider the stacked list of
-    drivers as a series of modules that can be plugged into the architecture
-    depending on how libvirt is configured to be built.</p>
+    <h2><a name="Driver">The libvirt drivers</a></h2>
+    <p></p>
    <p class="image">
      <img alt="The libvirt driver architecture"
           src="libvirt-driver-arch.png"/>
    </p>
-    <p>The driver architecture is also used to support other virtualization
-    components such as storage, storage pools, host device, networking,
-    network interfaces, and network filters.</p>
-    <p>See the <a href="drivers.html">libvirt drivers</a> page for more
-    information on hypervisor and storage specific drivers.</p>
-    <p>Not all drivers support every virtualization function possible.
-    The <a href="hvsupport.html">libvirt API support matrix</a> lists
-    the various functions and support found in each driver by the version
-    support was added into libvirt.
-    </p>
-    <h2><a id="Remote">Daemon and Remote Access</a></h2>
-    <p>Access to libvirt drivers is primarily handled by the libvirtd
-    daemon through the <a href="remote.html">remote</a> driver via an
-    <a href="internals/rpc.html">RPC</a>. Some hypervisors do support
-    client-side connections and responses, such as Test, OpenVZ, VMware,
-    VirtualBox (vbox), ESX, Hyper-V, Xen, and Virtuozzo.
-    The libvirtd daemon service is started on the host at system boot
-    time and can also be restarted at any time by a properly privileged
-    user, such as root. The libvirtd daemon uses the same libvirt API
-    <a href="html/libvirt-libvirt-host.html#virInitialize">
-      <code>virInitialize</code>
-    </a>
-    sequence as applications
-    for client-side driver registrations, but then extends the registered
-    driver list to encompass all known drivers supported for all driver
-    types supported on the host. </p>
-    <p>The libvirt client <a href="apps.html">applications</a> use a
-    <a href="uri.html">URI</a> to obtain the <code>virConnectPtr</code>.
-    The <code>virConnectPtr</code> keeps track of the driver connection
-    plus a variety of other connections (network, interface, storage, etc.).
-    The <code>virConnectPtr</code> is then used as a parameter to other
-    virtualization <a href="#Functions">functions</a>. Depending upon the
-    driver being used, calls will be routed through the remote driver to
-    the libvirtd daemon. The daemon will reference the connection specific
-    driver in order to retrieve the requested information and then pass
-    back status and/or data through the connection back to the application.
-    The application can then decide what to do with that data, such as
-    display, write log data, etc. <a href="migration.html">Migration</a>
-    is an example of many facets of the architecture in use.</p>
-
+    <h2><a name="Remote">Daemon and remote access</a></h2>
+    <p></p>
    <p class="image">
      <img alt="The libvirt daemon and remote architecture"
           src="libvirt-daemon-arch.png"/>
    </p>
-    <p>
-    The key takeaway from the above diagram is that there is a remote driver
-    which handles transactions for a majority of the drivers. The libvirtd
-    daemon running on the host will receive transaction requests from the
-    remote driver and will then query the hypervisor driver as specified in
-    the <code>virConnectPtr</code> in order to fetch the data. The data will
-    then be returned through the remote driver to the client application
-    for processing.
-    </p>
-    <p>If you are interested in contributing to libvirt, read the
-    <a href="http://wiki.libvirt.org/page/FAQ">FAQ</a> and
-    <a href="hacking.html">hacking</a> guidelines to gain an understanding
-    of basic rules and guidelines.  In order to add new API functionality
-    follow the instructions regarding
-    <a href="api_extension.html">implementing a new API in libvirt</a>.
-    </p>
-
  </body>
 </html>
--- a/docs/api_extension.html.in
+++ b/docs/api_extension.html.in
@@ -1,6 +1,8 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
+<html>
+  <head>
+    <title>Implementing a new API in Libvirt</title>
+  </head>
+
  <body>
    <h1>Implementing a new API in Libvirt</h1>

@@ -8,9 +10,14 @@

    <p>
      This document walks you through the process of implementing a new
-      API in libvirt.  Remember that new API consists of any new public
-      functions, as well as the addition of flags or extensions of XML used by
-      existing functions.
+      API in libvirt.  It uses as an example the addition of an API for
+      separating maximum from current vcpu usage of a domain, over
+      the course of a fifteen-patch series.
+      Remember that new API consists of any new public functions, as
+      well as the addition of flags or extensions of XML used by
+      existing functions.  The example in this document adds both new
+      functions and an XML extension.  Not all libvirt API additions
+      require quite as many patches.
    </p>

    <p>
@@ -22,7 +29,12 @@
      added to libvirt.  Someone may already be working on the feature you
      want.  Also, recognize that everything you write is likely to undergo
      significant rework as you discuss it with the other developers, so
-      don't wait too long before getting feedback.
+      don't wait too long before getting feedback.  In the vcpu example
+      below, list feedback was first requested
+      <a href="https://www.redhat.com/archives/libvir-list/2010-September/msg00423.html">here</a>
+      and resulted in several rounds of improvements before coding
+      began.  In turn, this example is slightly rearranged from the actual
+      order of the commits.
    </p>

    <p>
@@ -34,7 +46,7 @@
    </p>

    <p>
-      <a href="https://libvirt.org/downloads.html">https://libvirt.org/downloads.html</a>
+      <a href="http://libvirt.org/downloads.html">http://libvirt.org/downloads.html</a>
    </p>

    <p>
@@ -71,12 +83,14 @@
    </p>

    <p>
-      Submit new code in the form of one patch per step.  That's not to say
-      submit patches before you have working functionality--get the whole thing
-      working and make sure you're happy with it.  Then use git to break the
-      changes into pieces so you don't drop a big blob of code on the
-      mailing list in one go.  Also, you should follow the upstream tree, and
-      rebase your series to adapt your patches to work with any other changes
+      Submit new code in the form shown in the example code: one patch
+      per step.  That's not to say submit patches before you have working
+      functionality--get the whole thing working and make sure you're happy
+      with it.  Then use git or some other version control system that lets
+      you rewrite your commit history and break patches into pieces so you
+      don't drop a big blob of code on the mailing list in one go.
+      Also, you should follow the upstream tree, and rebase your
+      series to adapt your patches to work with any other changes
      that were accepted upstream during your development.
    </p>

@@ -89,14 +103,16 @@
      separately.
    </p>

-    <h2><a id='publicapi'>Defining the public API</a></h2>
+    <p>With that said, let's begin.</p>
+
+    <h2><a name='publicapi'>Defining the public API</a></h2>

    <p>The first task is to define the public API.  If the new API
      involves an XML extension, you have to enhance the RelaxNG
      schema and document the new elements or attributes:</p>

    <p><code>
-        docs/schemas/domaincommon.rng<br/>
+        docs/schemas/domain.rng<br/>
        docs/formatdomain.html.in
    </code></p>

@@ -106,7 +122,7 @@
      libvirt library and call the new function:</p>

    <p><code>
-        include/libvirt/libvirt-$MODULE.h.in
+        include/libvirt/libvirt.h.in
        src/libvirt_public.syms
    </code></p>

@@ -119,7 +135,11 @@
      rework it as you go through the process of implementing it.
    </p>

-    <h2><a id='internalapi'>Defining the internal API</a></h2>
+    <p class="example">See <a href="api_extension/0001-add-to-xml.patch">0001-add-to-xml.patch</a>
+    and <a href="api_extension/0002-add-new-public-API.patch">0002-add-new-public-API.patch</a>
+    for example code.</p>
+
+    <h2><a name='internalapi'>Defining the internal API</a></h2>

    <p>
      Each public API call is associated with a driver, such as a host
@@ -137,7 +157,7 @@

    <p>The driver structs are defined in:</p>

-    <p><code>src/driver-$MODULE.h</code></p>
+    <p><code>src/driver.h</code></p>

    <p>
      To define the internal API, first typedef the driver function
@@ -146,7 +166,9 @@
      provide a <code>NULL</code> stub for the new function.
    </p>

-    <h2><a id='implpublic'>Implementing the public API</a></h2>
+    <p class="example">See <a href="api_extension/0003-define-internal-driver-API.patch">0003-define-internal-driver-API.patch</a></p>
+
+    <h2><a name='implpublic'>Implementing the public API</a></h2>

    <p>
      Implementing the public API is largely a formality in which we wire up
@@ -160,13 +182,12 @@
        being called and its parameters;</li>
      <li>MUST call virResetLastError();</li>
      <li>SHOULD confirm that the connection is valid with
-        virCheckConnectReturn() or virCheckConnectGoto();</li>
+        VIR_IS_CONNECT(conn);</li>
      <li><strong>SECURITY: If the API requires a connection with write
          privileges, MUST confirm that the connection flags do not
-          indicate that the connection is read-only with
-          virCheckReadOnlyGoto();</strong></li>
+          indicate that the connection is read-only;</strong></li>
      <li>SHOULD do basic validation of the parameters that are being
-        passed in, using helpers like virCheckNonNullArgGoto();</li>
+        passed in;</li>
      <li>MUST confirm that the driver for this connection exists and that
        it implements this function;</li>
      <li>MUST call the internal API;</li>
@@ -177,17 +198,23 @@

    <p>The public API calls are implemented in:</p>

-    <p><code>src/libvirt-$MODULE.c</code></p>
+    <p><code>src/libvirt.c</code></p>

-    <h2><a id='remoteproto'>Implementing the remote protocol</a></h2>
+    <p class="example">See <a href="api_extension/0004-implement-the-public-APIs.patch">0004-implement-the-public-APIs.patch</a></p>
+
+    <h2><a name='remoteproto'>Implementing the remote protocol</a></h2>

    <p>
      Implementing the remote protocol is essentially a
      straightforward exercise which is probably most easily
-      understood by referring to the existing code.
+      understood by referring to the existing code and the example
+      patch.  It involves several related changes, including the
+      regeneration of derived files, with further details below.
    </p>

-    <h3><a id='wireproto'>Defining the wire protocol format</a></h3>
+    <p class="example">See <a href="api_extension/0005-implement-the-remote-protocol.patch">0005-implement-the-remote-protocol.patch</a></p>
+
+    <h3><a name='wireproto'>Defining the wire protocol format</a></h3>

    <p>
      Defining the wire protocol involves making additions to:
@@ -219,21 +246,21 @@
    </p>

    <p><code>
-        src/remote/remote_daemon_dispatch_stubs.h
-        src/remote/remote_daemon_dispatch.h
-        src/remote/remote_daemon_dispatch.c
+        daemon/remote_dispatch_args.h
+        daemon/remote_dispatch_prototypes.h
+        daemon/remote_dispatch_table.h
        src/remote/remote_protocol.c
        src/remote/remote_protocol.h
    </code></p>

-    <h3><a id='rpcclient'>Implement the RPC client</a></h3>
+    <h3><a name='rpcclient'>Implement the RPC client</a></h3>

    <p>
-      Implementing the RPC client uses the rpcgen generated .h files.
-      The remote method calls go in:
+      Implementing the uses the rpcgen generated .h files.  The remote
+      method calls go in:
    </p>

-    <p><code>src/remote/remote_driver.c</code></p>
+    <p><code>src/remote/remote_internal.c</code></p>

    <p>Each remote method invocation does the following:</p>

@@ -247,7 +274,7 @@
      <li>unlocks the remote driver.</li>
    </ol>

-    <h3><a id="serverdispatch">Implement the server side dispatcher</a></h3>
+    <h3><a name="serverdispatch">Implement the server side dispatcher</a></h3>

    <p>
      Implementing the server side of the remote function call is simply a
@@ -256,7 +283,7 @@
      The server side dispatchers are implemented in:
    </p>

-    <p><code>src/remote/remote_daemon_dispatch.c</code></p>
+    <p><code>daemon/remote.c</code></p>

    <p>Again, this step uses the .h files generated by make rpcgen.</p>

@@ -272,7 +299,9 @@
      existing lines probably imply a backwards-incompatible API change.
    </p>

-    <h2><a id="internaluseapi">Use the new API internally</a></h2>
+    <p class="example">See <a href="api_extension/0005-implement-the-remote-protocol.patch">0005-implement-the-remote-protocol.patch</a></p>
+
+    <h2><a name="internaluseapi">Use the new API internally</a></h2>

    <p>
      Sometimes, a new API serves as a superset of existing API, by
@@ -284,7 +313,9 @@
      not necessary if the new API has no relation to existing API.
    </p>

-    <h2><a id="virshuseapi">Expose the new API in virsh</a></h2>
+    <p class="example">See <a href="api_extension/0006-make-old-API-trivially-wrap-to-new-API.patch">0006-make-old-API-trivially-wrap-to-new-API.patch</a></p>
+
+    <h2><a name="virshuseapi">Expose the new API in virsh</a></h2>

    <p>
      All new API should be manageable from the virsh command line
@@ -309,11 +340,13 @@
    </p>

    <p><code>
-        tools/virsh-$MODULE.c<br/>
+        tools/virsh.c<br/>
        tools/virsh.pod
    </code></p>

-    <h2><a id="driverimpl">Implement the driver methods</a></h2>
+    <p class="example">See <a href="api_extension/0007-add-virsh-support.patch">0007-add-virsh-support.patch</a></p>
+
+    <h2><a name="driverimpl">Implement the driver methods</a></h2>

    <p>
      So, after all that, we get to the fun part.  All functionality in
@@ -324,7 +357,7 @@
      adding.
    </p>

-    <h3><a id="commonimpl">Implement common handling</a></h3>
+    <h3><a name="commonimpl">Implement common handling</a></h3>

    <p>
      If the new API is applicable to more than one driver, it may
@@ -339,7 +372,9 @@
      the same way as the older API wrappers.
    </p>

-    <h3><a id="drivercode">Implement driver handling</a></h3>
+    <p class="example">See <a href="api_extension/0008-support-new-xml.patch">0008-support-new-xml.patch</a></p>
+
+    <h3><a name="drivercode">Implement driver handling</a></h3>

    <p>
      The remaining patches should only touch one driver at a time.
@@ -350,14 +385,41 @@
    </p>

    <p>
-      It is always a good idea to patch the test driver in addition to the
-      target driver, to prove that the API can be used for more than one
-      driver.
+      In the example patches, three separate drivers are supported:
+      test, qemu, and xen.  It is always a good idea to patch the test
+      driver in addition to the target driver, to prove that the API
+      can be used for more than one driver.  The example updates the
+      test driver in one patch:
    </p>

+    <p class="example">See <a href="api_extension/0009-support-all-flags-in-test-driver.patch">0009-support-all-flags-in-test-driver.patch</a></p>
+
    <p>
-      Any cleanups resulting from the changes should be added as separate
-      patches at the end of the series.
+      The qemu changes were easier to split into two phases, one for
+      updating the mapping between the new XML and the hypervisor
+      command line arguments, and one for supporting all possible
+      flags of the new API:
+    </p>
+
+    <p class="example">See <a href="api_extension/0010-improve-vcpu-support-in-qemu-command-line.patch">0010-improve-vcpu-support-in-qemu-command-line.patch</a>
+      and <a href="api_extension/0011-complete-vcpu-support-in-qemu-driver.patch">0011-complete-vcpu-support-in-qemu-driver.patch</a></p>
+
+    <p>
+      Finally, the example breaks the xen driver changes across four
+      patches.  One maps the XML changes to the hypervisor command,
+      the next two are independently implementing the getter and
+      setter APIs, and the last one provides cleanup of code that was
+      rendered dead by the new API.
+    </p>
+
+    <p class="example">See <a href="api_extension/0012-improve-vcpu-support-in-xen-command-line.patch">0012-improve-vcpu-support-in-xen-command-line.patch</a>,
+      <a href="api_extension/0013-improve-getting-xen-vcpu-counts.patch">0013-improve-getting-xen-vcpu-counts.patch</a>,
+      <a href="api_extension/0014-improve-setting-xen-vcpu-counts.patch">0014-improve-setting-xen-vcpu-counts.patch</a>,
+      and <a href="api_extension/0015-remove-dead-xen-code.patch">0015-remove-dead-xen-code.patch</a></p>
+
+    <p>
+      The exact details of the example code are probably uninteresting
+      unless you're concerned with virtual cpu management.
    </p>

    <p>
--- a/docs/api_extension/0001-add-to-xml.patch
+++ b/docs/api_extension/0001-add-to-xml.patch
@@ -0,0 +1,145 @@
+From a74f4e44649906dcd82151f7ef837f66d7fa2ab1 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Mon, 27 Sep 2010 17:36:06 -0600
+Subject: [PATCH 01/15] vcpu: add current attribute to <vcpu> element
+
+Syntax agreed on in
+https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html
+
+<domain ...>
+  <vcpu current='x'>y</vcpu>
+...
+
+can now be used to specify 1 <= x <= y current vcpus, in relation
+to the boot-time max of y vcpus.  If current is omitted, then
+current and max are assumed to be the same value.
+
+* docs/schemas/domain.rng: Add new attribute.
+* docs/formatdomain.html.in: Document it.
+* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
+domainschematest.
+* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.
+---
+ docs/formatdomain.html.in                   |    9 +++++--
+ docs/schemas/domain.rng                     |    5 ++++
+ tests/qemuxml2argvdata/qemuxml2argv-smp.xml |   28 +++++++++++++++++++++++++++
+ tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml  |   22 +++++++++++++++++++++
+ 4 files changed, 61 insertions(+), 3 deletions(-)
+ create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-smp.xml
+ create mode 100644 tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml
+
+diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
+index a8a1fac..96de121 100644
+--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
+@@ -200,7 +200,7 @@
+     &lt;swap_hard_limit&gt;2097152&lt;/swap_hard_limit&gt;
+     &lt;min_guarantee&gt;65536&lt;/min_guarantee&gt;
+   &lt;/memtune&gt;
+-  &lt;vcpu cpuset="1-4,^3,6"&gt;2&lt;/vcpu&gt;
+  &lt;vcpu cpuset="1-4,^3,6" current="1"&gt;2&lt;/vcpu&gt;
+   ...</pre>
+
+     <dl>
+@@ -238,7 +238,7 @@
+ 	minimum memory allocation for the guest. The units for this value are
+ 	kilobytes (i.e. blocks of 1024 bytes)</dd>
+       <dt><code>vcpu</code></dt>
+-      <dd>The content of this element defines the number of virtual
+      <dd>The content of this element defines the maximum number of virtual
+         CPUs allocated for the guest OS, which must be between 1 and
+         the maximum supported by the hypervisor.  <span class="since">Since
+         0.4.4</span>, this element can contain an optional
+@@ -246,7 +246,10 @@
+         list of physical CPU numbers that virtual CPUs can be pinned
+         to.  Each element in that list is either a single CPU number,
+         a range of CPU numbers, or a caret followed by a CPU number to
+-        be excluded from a previous range.
+        be excluded from a previous range.  <span class="since">Since
+        0.8.5</span>, the optional attribute <code>current</code> can
+        be used to specify whether fewer than the maximum number of
+        virtual CPUs should be enabled.
+       </dd>
+     </dl>
+
+diff --git a/docs/schemas/domain.rng b/docs/schemas/domain.rng
+index f230263..a934a77 100644
+--- a/docs/schemas/domain.rng
+++ b/docs/schemas/domain.rng
+@@ -337,6 +337,11 @@
+               <ref name="cpuset"/>
+             </attribute>
+           </optional>
+          <optional>
+            <attribute name="current">
+              <ref name="countCPU"/>
+            </attribute>
+          </optional>
+           <ref name="countCPU"/>
+         </element>
+       </optional>
+diff --git a/tests/qemuxml2argvdata/qemuxml2argv-smp.xml b/tests/qemuxml2argvdata/qemuxml2argv-smp.xml
+new file mode 100644
+index 0000000..975f873
+--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-smp.xml
+@@ -0,0 +1,28 @@
+<domain type='qemu'>
+  <name>QEMUGuest1</name>
+  <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+  <memory>219200</memory>
+  <currentMemory>219200</currentMemory>
+  <vcpu current='1'>2</vcpu>
+  <os>
+    <type arch='i686' machine='pc'>hvm</type>
+    <boot dev='hd'/>
+  </os>
+  <cpu>
+    <topology sockets='2' cores='1' threads='1'/>
+  </cpu>
+  <clock offset='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu</emulator>
+    <disk type='block' device='disk'>
+      <source dev='/dev/HostVG/QEMUGuest1'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' unit='0'/>
+    </disk>
+    <controller type='ide' index='0'/>
+    <memballoon model='virtio'/>
+  </devices>
+</domain>
+diff --git a/tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml b/tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml
+new file mode 100644
+index 0000000..d061e11
+--- /dev/null
+++ b/tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml
+@@ -0,0 +1,22 @@
+<domain type='xen' id='15'>
+  <name>pvtest</name>
+  <uuid>596a5d2171f48fb2e068e2386a5c413e</uuid>
+  <os>
+    <type>linux</type>
+    <kernel>/var/lib/xen/vmlinuz.2Dn2YT</kernel>
+    <initrd>/var/lib/xen/initrd.img.0u-Vhq</initrd>
+    <cmdline> method=http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5.91/x86_64/os  </cmdline>
+  </os>
+  <memory>430080</memory>
+  <vcpu current='2'>4</vcpu>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>destroy</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <disk type='file' device='disk'>
+      <source file='/root/some.img'/>
+      <target dev='xvda'/>
+    </disk>
+    <console tty='/dev/pts/4'/>
+  </devices>
+</domain>
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0002-add-new-public-API.patch
+++ b/docs/api_extension/0002-add-new-public-API.patch
@@ -0,0 +1,62 @@
+From ea3f5c68093429c6ad507b45689cdf209c2c257b Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Fri, 24 Sep 2010 16:48:45 -0600
+Subject: [PATCH 02/15] vcpu: add new public API
+
+API agreed on in
+https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
+but modified for enum names to be consistent with virDomainDeviceModifyFlags.
+
+* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
+(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
+declarations.
+* src/libvirt_public.syms: Export new symbols.
+---
+ include/libvirt/libvirt.h.in |   15 +++++++++++++++
+ src/libvirt_public.syms      |    2 ++
+ 2 files changed, 17 insertions(+), 0 deletions(-)
+
+diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
+index 2eba61e..d0cc4c0 100644
+--- a/include/libvirt/libvirt.h.in
+++ b/include/libvirt/libvirt.h.in
+@@ -915,8 +915,23 @@ struct _virVcpuInfo {
+ };
+ typedef virVcpuInfo *virVcpuInfoPtr;
+
+/* Flags for controlling virtual CPU hot-plugging.  */
+typedef enum {
+    /* Must choose at least one of these two bits; SetVcpus can choose both */
+    VIR_DOMAIN_VCPU_LIVE    = (1 << 0), /* Affect active domain */
+    VIR_DOMAIN_VCPU_CONFIG  = (1 << 1), /* Affect next boot */
+
+    /* Additional flags to be bit-wise OR'd in */
+    VIR_DOMAIN_VCPU_MAXIMUM = (1 << 2), /* Max rather than current count */
+} virDomainVcpuFlags;
+
+ int                     virDomainSetVcpus       (virDomainPtr domain,
+                                                  unsigned int nvcpus);
+int                     virDomainSetVcpusFlags  (virDomainPtr domain,
+                                                 unsigned int nvcpus,
+                                                 unsigned int flags);
+int                     virDomainGetVcpusFlags  (virDomainPtr domain,
+                                                 unsigned int flags);
+
+ int                     virDomainPinVcpu        (virDomainPtr domain,
+                                                  unsigned int vcpu,
+diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms
+index fceb516..a8091b1 100644
+--- a/src/libvirt_public.syms
+++ b/src/libvirt_public.syms
+@@ -409,6 +409,8 @@ LIBVIRT_0.8.5 {
+     global:
+         virDomainSetMemoryParameters;
+         virDomainGetMemoryParameters;
+        virDomainGetVcpusFlags;
+        virDomainSetVcpusFlags;
+ } LIBVIRT_0.8.2;
+
+ # .... define new API here using predicted next version number ....
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0003-define-internal-driver-API.patch
+++ b/docs/api_extension/0003-define-internal-driver-API.patch
@@ -0,0 +1,222 @@
+From dd255d64053e9960cd375994ce8f056522e12acc Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Mon, 27 Sep 2010 09:18:22 -0600
+Subject: [PATCH 03/15] vcpu: define internal driver API
+
+* src/driver.h (virDrvDomainSetVcpusFlags)
+(virDrvDomainGetVcpusFlags): New typedefs.
+(_virDriver): New callback members.
+* src/esx/esx_driver.c (esxDriver): Add stub for driver.
+* src/lxc/lxc_driver.c (lxcDriver): Likewise.
+* src/opennebula/one_driver.c (oneDriver): Likewise.
+* src/openvz/openvz_driver.c (openvzDriver): Likewise.
+* src/phyp/phyp_driver.c (phypDriver): Likewise.
+* src/qemu/qemu_driver.c (qemuDriver): Likewise.
+* src/remote/remote_driver.c (remote_driver): Likewise.
+* src/test/test_driver.c (testDriver): Likewise.
+* src/uml/uml_driver.c (umlDriver): Likewise.
+* src/vbox/vbox_tmpl.c (Driver): Likewise.
+* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
+* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
+---
+ src/driver.h                |    9 +++++++++
+ src/esx/esx_driver.c        |    2 ++
+ src/lxc/lxc_driver.c        |    2 ++
+ src/opennebula/one_driver.c |    2 ++
+ src/openvz/openvz_driver.c  |    2 ++
+ src/phyp/phyp_driver.c      |    2 ++
+ src/qemu/qemu_driver.c      |    2 ++
+ src/remote/remote_driver.c  |    2 ++
+ src/test/test_driver.c      |    2 ++
+ src/uml/uml_driver.c        |    2 ++
+ src/vbox/vbox_tmpl.c        |    2 ++
+ src/xen/xen_driver.c        |    2 ++
+ src/xenapi/xenapi_driver.c  |    2 ++
+ 13 files changed, 33 insertions(+), 0 deletions(-)
+
+diff --git a/src/driver.h b/src/driver.h
+index 32aeb04..79a96c1 100644
+--- a/src/driver.h
+++ b/src/driver.h
+@@ -185,6 +185,13 @@ typedef int
+         (*virDrvDomainSetVcpus)		(virDomainPtr domain,
+                                          unsigned int nvcpus);
+ typedef int
+        (*virDrvDomainSetVcpusFlags)	(virDomainPtr domain,
+                                         unsigned int nvcpus,
+                                         unsigned int flags);
+typedef int
+        (*virDrvDomainGetVcpusFlags)	(virDomainPtr domain,
+                                         unsigned int flags);
+typedef int
+         (*virDrvDomainPinVcpu)		(virDomainPtr domain,
+                                          unsigned int vcpu,
+                                          unsigned char *cpumap,
+@@ -520,6 +527,8 @@ struct _virDriver {
+     virDrvDomainRestore		domainRestore;
+     virDrvDomainCoreDump		domainCoreDump;
+     virDrvDomainSetVcpus		domainSetVcpus;
+    virDrvDomainSetVcpusFlags		domainSetVcpusFlags;
+    virDrvDomainGetVcpusFlags		domainGetVcpusFlags;
+     virDrvDomainPinVcpu		domainPinVcpu;
+     virDrvDomainGetVcpus		domainGetVcpus;
+     virDrvDomainGetMaxVcpus		domainGetMaxVcpus;
+diff --git a/src/esx/esx_driver.c b/src/esx/esx_driver.c
+index 1b4ee29..2a32374 100644
+--- a/src/esx/esx_driver.c
+++ b/src/esx/esx_driver.c
+@@ -4160,6 +4160,8 @@ static virDriver esxDriver = {
+     NULL,                            /* domainRestore */
+     NULL,                            /* domainCoreDump */
+     esxDomainSetVcpus,               /* domainSetVcpus */
+    NULL,                            /* domainSetVcpusFlags */
+    NULL,                            /* domainGetVcpusFlags */
+     NULL,                            /* domainPinVcpu */
+     NULL,                            /* domainGetVcpus */
+     esxDomainGetMaxVcpus,            /* domainGetMaxVcpus */
+diff --git a/src/lxc/lxc_driver.c b/src/lxc/lxc_driver.c
+index df814da..7563a8c 100644
+--- a/src/lxc/lxc_driver.c
+++ b/src/lxc/lxc_driver.c
+@@ -2768,6 +2768,8 @@ static virDriver lxcDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     NULL, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     NULL, /* domainGetMaxVcpus */
+diff --git a/src/opennebula/one_driver.c b/src/opennebula/one_driver.c
+index ced9a38..199fca3 100644
+--- a/src/opennebula/one_driver.c
+++ b/src/opennebula/one_driver.c
+@@ -751,6 +751,8 @@ static virDriver oneDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     NULL, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     NULL, /* domainGetMaxVcpus */
+diff --git a/src/openvz/openvz_driver.c b/src/openvz/openvz_driver.c
+index 92cf4a1..9d19aeb 100644
+--- a/src/openvz/openvz_driver.c
+++ b/src/openvz/openvz_driver.c
+@@ -1590,6 +1590,8 @@ static virDriver openvzDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     openvzDomainSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     openvzDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/phyp/phyp_driver.c b/src/phyp/phyp_driver.c
+index e63d8d9..6e0a5e9 100644
+--- a/src/phyp/phyp_driver.c
+++ b/src/phyp/phyp_driver.c
+@@ -3941,6 +3941,8 @@ static virDriver phypDriver = {
+     NULL,                       /* domainRestore */
+     NULL,                       /* domainCoreDump */
+     phypDomainSetCPU,           /* domainSetVcpus */
+    NULL,                       /* domainSetVcpusFlags */
+    NULL,                       /* domainGetVcpusFlags */
+     NULL,                       /* domainPinVcpu */
+     NULL,                       /* domainGetVcpus */
+     phypGetLparCPUMAX,          /* domainGetMaxVcpus */
+diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
+index abd8e9d..3d17e04 100644
+--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
+@@ -12938,6 +12938,8 @@ static virDriver qemuDriver = {
+     qemudDomainRestore, /* domainRestore */
+     qemudDomainCoreDump, /* domainCoreDump */
+     qemudDomainSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     qemudDomainPinVcpu, /* domainPinVcpu */
+     qemudDomainGetVcpus, /* domainGetVcpus */
+     qemudDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c
+index 0b10406..1a687ad 100644
+--- a/src/remote/remote_driver.c
+++ b/src/remote/remote_driver.c
+@@ -10468,6 +10468,8 @@ static virDriver remote_driver = {
+     remoteDomainRestore, /* domainRestore */
+     remoteDomainCoreDump, /* domainCoreDump */
+     remoteDomainSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     remoteDomainPinVcpu, /* domainPinVcpu */
+     remoteDomainGetVcpus, /* domainGetVcpus */
+     remoteDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/test/test_driver.c b/src/test/test_driver.c
+index 7d4d119..6a00558 100644
+--- a/src/test/test_driver.c
+++ b/src/test/test_driver.c
+@@ -5260,6 +5260,8 @@ static virDriver testDriver = {
+     testDomainRestore, /* domainRestore */
+     testDomainCoreDump, /* domainCoreDump */
+     testSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     testDomainPinVcpu, /* domainPinVcpu */
+     testDomainGetVcpus, /* domainGetVcpus */
+     testDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/uml/uml_driver.c b/src/uml/uml_driver.c
+index 3dcd321..5161012 100644
+--- a/src/uml/uml_driver.c
+++ b/src/uml/uml_driver.c
+@@ -2129,6 +2129,8 @@ static virDriver umlDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     NULL, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     NULL, /* domainGetMaxVcpus */
+diff --git a/src/vbox/vbox_tmpl.c b/src/vbox/vbox_tmpl.c
+index 7e7d8e4..cb9193a 100644
+--- a/src/vbox/vbox_tmpl.c
+++ b/src/vbox/vbox_tmpl.c
+@@ -8267,6 +8267,8 @@ virDriver NAME(Driver) = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     vboxDomainSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     vboxDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/xen/xen_driver.c b/src/xen/xen_driver.c
+index c2a4de3..7d67ced 100644
+--- a/src/xen/xen_driver.c
+++ b/src/xen/xen_driver.c
+@@ -1951,6 +1951,8 @@ static virDriver xenUnifiedDriver = {
+     xenUnifiedDomainRestore, /* domainRestore */
+     xenUnifiedDomainCoreDump, /* domainCoreDump */
+     xenUnifiedDomainSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     xenUnifiedDomainPinVcpu, /* domainPinVcpu */
+     xenUnifiedDomainGetVcpus, /* domainGetVcpus */
+     xenUnifiedDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/xenapi/xenapi_driver.c b/src/xenapi/xenapi_driver.c
+index e62a139..753169c 100644
+--- a/src/xenapi/xenapi_driver.c
+++ b/src/xenapi/xenapi_driver.c
+@@ -1754,6 +1754,8 @@ static virDriver xenapiDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     xenapiDomainSetVcpus, /* domainSetVcpus */
+    NULL, /* domainSetVcpusFlags */
+    NULL, /* domainGetVcpusFlags */
+     xenapiDomainPinVcpu, /* domainPinVcpu */
+     xenapiDomainGetVcpus, /* domainGetVcpus */
+     xenapiDomainGetMaxVcpus, /* domainGetMaxVcpus */
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0004-implement-the-public-APIs.patch
+++ b/docs/api_extension/0004-implement-the-public-APIs.patch
@@ -0,0 +1,188 @@
+From 9d2c60799271d605f82dfd4bfa6ed7d14ad87e26 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Mon, 27 Sep 2010 09:37:22 -0600
+Subject: [PATCH 04/15] vcpu: implement the public APIs
+
+Factors common checks (such as nonzero vcpu count) up front, but
+drivers will still need to do additional flag checks.
+
+* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpusFlags):
+New functions.
+(virDomainSetVcpus, virDomainGetMaxVcpus): Refer to new API.
+---
+ src/libvirt.c |  140 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 134 insertions(+), 6 deletions(-)
+
+diff --git a/src/libvirt.c b/src/libvirt.c
+index 629d97b..1b39210 100644
+--- a/src/libvirt.c
+++ b/src/libvirt.c
+@@ -5192,7 +5192,9 @@ error:
+  * This function requires privileged access to the hypervisor.
+  *
+  * This command only changes the runtime configuration of the domain,
+- * so can only be called on an active domain.
+ * so can only be called on an active domain.  It is hypervisor-dependent
+ * whether it also affects persistent configuration; for more control,
+ * use virDomainSetVcpusFlags().
+  *
+  * Returns 0 in case of success, -1 in case of failure.
+  */
+@@ -5237,13 +5239,139 @@ error:
+ }
+
+ /**
+ * virDomainSetVcpusFlags:
+ * @domain: pointer to domain object, or NULL for Domain0
+ * @nvcpus: the new number of virtual CPUs for this domain, must be at least 1
+ * @flags: an OR'ed set of virDomainVcpuFlags
+ *
+ * Dynamically change the number of virtual CPUs used by the domain.
+ * Note that this call may fail if the underlying virtualization hypervisor
+ * does not support it or if growing the number is arbitrary limited.
+ * This function requires privileged access to the hypervisor.
+ *
+ * @flags must include VIR_DOMAIN_VCPU_LIVE to affect a running
+ * domain (which may fail if domain is not active), or
+ * VIR_DOMAIN_VCPU_CONFIG to affect the next boot via the XML
+ * description of the domain.  Both flags may be set.
+ *
+ * If @flags includes VIR_DOMAIN_VCPU_MAXIMUM, then
+ * VIR_DOMAIN_VCPU_LIVE must be clear, and only the maximum virtual
+ * CPU limit is altered; generally, this value must be less than or
+ * equal to virConnectGetMaxVcpus().  Otherwise, this call affects the
+ * current virtual CPU limit, which must be less than or equal to the
+ * maximum limit.
+ *
+ * Returns 0 in case of success, -1 in case of failure.
+ */
+
+int
+virDomainSetVcpusFlags(virDomainPtr domain, unsigned int nvcpus,
+                       unsigned int flags)
+{
+    virConnectPtr conn;
+    VIR_DEBUG("domain=%p, nvcpus=%u, flags=%u", domain, nvcpus, flags);
+
+    virResetLastError();
+
+    if (!VIR_IS_CONNECTED_DOMAIN(domain)) {
+        virLibDomainError(NULL, VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+        virDispatchError(NULL);
+        return (-1);
+    }
+    if (domain->conn->flags & VIR_CONNECT_RO) {
+        virLibDomainError(domain, VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+        goto error;
+    }
+
+    /* Perform some argument validation common to all implementations.  */
+    if (nvcpus < 1 || (unsigned short) nvcpus != nvcpus ||
+        (flags & (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG)) == 0) {
+        virLibDomainError(domain, VIR_ERR_INVALID_ARG, __FUNCTION__);
+        goto error;
+    }
+    conn = domain->conn;
+
+    if (conn->driver->domainSetVcpusFlags) {
+        int ret;
+        ret = conn->driver->domainSetVcpusFlags (domain, nvcpus, flags);
+        if (ret < 0)
+            goto error;
+        return ret;
+    }
+
+    virLibConnError (conn, VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+    virDispatchError(domain->conn);
+    return -1;
+}
+
+/**
+ * virDomainGetVcpusFlags:
+ * @domain: pointer to domain object, or NULL for Domain0
+ * @flags: an OR'ed set of virDomainVcpuFlags
+ *
+ * Query the number of virtual CPUs used by the domain.  Note that
+ * this call may fail if the underlying virtualization hypervisor does
+ * not support it.  This function requires privileged access to the
+ * hypervisor.
+ *
+ * @flags must include either VIR_DOMAIN_VCPU_ACTIVE to query a
+ * running domain (which will fail if domain is not active), or
+ * VIR_DOMAIN_VCPU_PERSISTENT to query the XML description of the
+ * domain.  It is an error to set both flags.
+ *
+ * If @flags includes VIR_DOMAIN_VCPU_MAXIMUM, then the maximum
+ * virtual CPU limit is queried.  Otherwise, this call queries the
+ * current virtual CPU limit.
+ *
+ * Returns 0 in case of success, -1 in case of failure.
+ */
+
+int
+virDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags)
+{
+    virConnectPtr conn;
+    VIR_DEBUG("domain=%p, flags=%u", domain, flags);
+
+    virResetLastError();
+
+    if (!VIR_IS_CONNECTED_DOMAIN(domain)) {
+        virLibDomainError(NULL, VIR_ERR_INVALID_DOMAIN, __FUNCTION__);
+        virDispatchError(NULL);
+        return (-1);
+    }
+
+    /* Exactly one of these two flags should be set.  */
+    if (!(flags & VIR_DOMAIN_VCPU_LIVE) == !(flags & VIR_DOMAIN_VCPU_CONFIG)) {
+        virLibDomainError(domain, VIR_ERR_INVALID_ARG, __FUNCTION__);
+        goto error;
+    }
+    conn = domain->conn;
+
+    if (conn->driver->domainGetVcpusFlags) {
+        int ret;
+        ret = conn->driver->domainGetVcpusFlags (domain, flags);
+        if (ret < 0)
+            goto error;
+        return ret;
+    }
+
+    virLibConnError (conn, VIR_ERR_NO_SUPPORT, __FUNCTION__);
+
+error:
+    virDispatchError(domain->conn);
+    return -1;
+}
+
+/**
+  * virDomainPinVcpu:
+  * @domain: pointer to domain object, or NULL for Domain0
+  * @vcpu: virtual CPU number
+  * @cpumap: pointer to a bit map of real CPUs (in 8-bit bytes) (IN)
+- * 	Each bit set to 1 means that corresponding CPU is usable.
+- * 	Bytes are stored in little-endian order: CPU0-7, 8-15...
+- * 	In each byte, lowest CPU number is least significant bit.
+ *      Each bit set to 1 means that corresponding CPU is usable.
+ *      Bytes are stored in little-endian order: CPU0-7, 8-15...
+ *      In each byte, lowest CPU number is least significant bit.
+  * @maplen: number of bytes in cpumap, from 1 up to size of CPU map in
+  *	underlying virtualization system (Xen...).
+  *	If maplen < size, missing bytes are set to zero.
+@@ -5371,9 +5499,9 @@ error:
+  *
+  * Provides the maximum number of virtual CPUs supported for
+  * the guest VM. If the guest is inactive, this is basically
+- * the same as virConnectGetMaxVcpus. If the guest is running
+ * the same as virConnectGetMaxVcpus(). If the guest is running
+  * this will reflect the maximum number of virtual CPUs the
+- * guest was booted with.
+ * guest was booted with.  For more details, see virDomainGetVcpusFlags().
+  *
+  * Returns the maximum of virtual CPU or -1 in case of error.
+  */
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0005-implement-the-remote-protocol.patch
+++ b/docs/api_extension/0005-implement-the-remote-protocol.patch
@@ -0,0 +1,421 @@
+From eb826444f90c2563dadf148630b0cd6a9b41ba1e Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Mon, 27 Sep 2010 10:10:06 -0600
+Subject: [PATCH 05/15] vcpu: implement the remote protocol
+
+Done by editing the first three files, then running
+'make -C src rpcgen', then editing src/remote_protocol-structs
+to match.
+
+* daemon/remote.c (remoteDispatchDomainSetVcpusFlags)
+(remoteDispatchDomainGetVcpusFlags): New functions.
+* src/remote/remote_driver.c (remoteDomainSetVcpusFlags)
+(remoteDomainGetVcpusFlags, remote_driver): Client side
+serialization.
+* src/remote/remote_protocol.x
+(remote_domain_set_vcpus_flags_args)
+(remote_domain_get_vcpus_flags_args)
+(remote_domain_get_vcpus_flags_ret)
+(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
+(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS): Define wire format.
+* daemon/remote_dispatch_args.h: Regenerate.
+* daemon/remote_dispatch_prototypes.h: Likewise.
+* daemon/remote_dispatch_table.h: Likewise.
+* src/remote/remote_protocol.c: Likewise.
+* src/remote/remote_protocol.h: Likewise.
+* src/remote_protocol-structs: Likewise.
+---
+ daemon/remote.c                     |   53 ++++++++++++++++++++++++++++++++
+ daemon/remote_dispatch_args.h       |    2 +
+ daemon/remote_dispatch_prototypes.h |   16 ++++++++++
+ daemon/remote_dispatch_ret.h        |    1 +
+ daemon/remote_dispatch_table.h      |   10 ++++++
+ src/remote/remote_driver.c          |   57 +++++++++++++++++++++++++++++++++-
+ src/remote/remote_protocol.c        |   33 ++++++++++++++++++++
+ src/remote/remote_protocol.h        |   26 ++++++++++++++++
+ src/remote/remote_protocol.x        |   19 +++++++++++-
+ src/remote_protocol-structs         |   12 +++++++
+ 10 files changed, 226 insertions(+), 3 deletions(-)
+
+diff --git a/daemon/remote.c b/daemon/remote.c
+index 7a96e29..323f00c 100644
+--- a/daemon/remote.c
+++ b/daemon/remote.c
+@@ -1751,6 +1751,33 @@ oom:
+ }
+
+ static int
+remoteDispatchDomainGetVcpusFlags (struct qemud_server *server ATTRIBUTE_UNUSED,
+                                   struct qemud_client *client ATTRIBUTE_UNUSED,
+                                   virConnectPtr conn,
+                                   remote_message_header *hdr ATTRIBUTE_UNUSED,
+                                   remote_error *rerr,
+                                   remote_domain_get_vcpus_flags_args *args,
+                                   remote_domain_get_vcpus_flags_ret *ret)
+{
+    virDomainPtr dom;
+
+    dom = get_nonnull_domain (conn, args->dom);
+    if (dom == NULL) {
+        remoteDispatchConnError(rerr, conn);
+        return -1;
+    }
+
+    ret->num = virDomainGetVcpusFlags (dom, args->flags);
+    if (ret->num == -1) {
+        virDomainFree(dom);
+        remoteDispatchConnError(rerr, conn);
+        return -1;
+    }
+    virDomainFree(dom);
+    return 0;
+}
+
+static int
+ remoteDispatchDomainMigratePrepare (struct qemud_server *server ATTRIBUTE_UNUSED,
+                                     struct qemud_client *client ATTRIBUTE_UNUSED,
+                                     virConnectPtr conn,
+@@ -2568,6 +2595,32 @@ remoteDispatchDomainSetVcpus (struct qemud_server *server ATTRIBUTE_UNUSED,
+ }
+
+ static int
+remoteDispatchDomainSetVcpusFlags (struct qemud_server *server ATTRIBUTE_UNUSED,
+                                   struct qemud_client *client ATTRIBUTE_UNUSED,
+                                   virConnectPtr conn,
+                                   remote_message_header *hdr ATTRIBUTE_UNUSED,
+                                   remote_error *rerr,
+                                   remote_domain_set_vcpus_flags_args *args,
+                                   void *ret ATTRIBUTE_UNUSED)
+{
+    virDomainPtr dom;
+
+    dom = get_nonnull_domain (conn, args->dom);
+    if (dom == NULL) {
+        remoteDispatchConnError(rerr, conn);
+        return -1;
+    }
+
+    if (virDomainSetVcpusFlags (dom, args->nvcpus, args->flags) == -1) {
+        virDomainFree(dom);
+        remoteDispatchConnError(rerr, conn);
+        return -1;
+    }
+    virDomainFree(dom);
+    return 0;
+}
+
+static int
+ remoteDispatchDomainShutdown (struct qemud_server *server ATTRIBUTE_UNUSED,
+                               struct qemud_client *client ATTRIBUTE_UNUSED,
+                               virConnectPtr conn,
+diff --git a/daemon/remote_dispatch_args.h b/daemon/remote_dispatch_args.h
+index d8528b6..9583e9c 100644
+--- a/daemon/remote_dispatch_args.h
+++ b/daemon/remote_dispatch_args.h
+@@ -167,3 +167,5 @@
+     remote_domain_create_with_flags_args val_remote_domain_create_with_flags_args;
+     remote_domain_set_memory_parameters_args val_remote_domain_set_memory_parameters_args;
+     remote_domain_get_memory_parameters_args val_remote_domain_get_memory_parameters_args;
+    remote_domain_set_vcpus_flags_args val_remote_domain_set_vcpus_flags_args;
+    remote_domain_get_vcpus_flags_args val_remote_domain_get_vcpus_flags_args;
+diff --git a/daemon/remote_dispatch_prototypes.h b/daemon/remote_dispatch_prototypes.h
+index b674bb4..6b35851 100644
+--- a/daemon/remote_dispatch_prototypes.h
+++ b/daemon/remote_dispatch_prototypes.h
+@@ -306,6 +306,14 @@ static int remoteDispatchDomainGetVcpus(
+     remote_error *err,
+     remote_domain_get_vcpus_args *args,
+     remote_domain_get_vcpus_ret *ret);
+static int remoteDispatchDomainGetVcpusFlags(
+    struct qemud_server *server,
+    struct qemud_client *client,
+    virConnectPtr conn,
+    remote_message_header *hdr,
+    remote_error *err,
+    remote_domain_get_vcpus_flags_args *args,
+    remote_domain_get_vcpus_flags_ret *ret);
+ static int remoteDispatchDomainHasCurrentSnapshot(
+     struct qemud_server *server,
+     struct qemud_client *client,
+@@ -554,6 +562,14 @@ static int remoteDispatchDomainSetVcpus(
+     remote_error *err,
+     remote_domain_set_vcpus_args *args,
+     void *ret);
+static int remoteDispatchDomainSetVcpusFlags(
+    struct qemud_server *server,
+    struct qemud_client *client,
+    virConnectPtr conn,
+    remote_message_header *hdr,
+    remote_error *err,
+    remote_domain_set_vcpus_flags_args *args,
+    void *ret);
+ static int remoteDispatchDomainShutdown(
+     struct qemud_server *server,
+     struct qemud_client *client,
+diff --git a/daemon/remote_dispatch_ret.h b/daemon/remote_dispatch_ret.h
+index 17c9bca..3723b00 100644
+--- a/daemon/remote_dispatch_ret.h
+++ b/daemon/remote_dispatch_ret.h
+@@ -136,3 +136,4 @@
+     remote_domain_get_block_info_ret val_remote_domain_get_block_info_ret;
+     remote_domain_create_with_flags_ret val_remote_domain_create_with_flags_ret;
+     remote_domain_get_memory_parameters_ret val_remote_domain_get_memory_parameters_ret;
+    remote_domain_get_vcpus_flags_ret val_remote_domain_get_vcpus_flags_ret;
+diff --git a/daemon/remote_dispatch_table.h b/daemon/remote_dispatch_table.h
+index 47d95eb..dd2adc7 100644
+--- a/daemon/remote_dispatch_table.h
+++ b/daemon/remote_dispatch_table.h
+@@ -997,3 +997,13 @@
+     .args_filter = (xdrproc_t) xdr_remote_domain_get_memory_parameters_args,
+     .ret_filter = (xdrproc_t) xdr_remote_domain_get_memory_parameters_ret,
+ },
+{   /* DomainSetVcpusFlags => 199 */
+    .fn = (dispatch_fn) remoteDispatchDomainSetVcpusFlags,
+    .args_filter = (xdrproc_t) xdr_remote_domain_set_vcpus_flags_args,
+    .ret_filter = (xdrproc_t) xdr_void,
+},
+{   /* DomainGetVcpusFlags => 200 */
+    .fn = (dispatch_fn) remoteDispatchDomainGetVcpusFlags,
+    .args_filter = (xdrproc_t) xdr_remote_domain_get_vcpus_flags_args,
+    .ret_filter = (xdrproc_t) xdr_remote_domain_get_vcpus_flags_ret,
+},
+diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c
+index 1a687ad..37c37ef 100644
+--- a/src/remote/remote_driver.c
+++ b/src/remote/remote_driver.c
+@@ -2580,6 +2580,59 @@ done:
+ }
+
+ static int
+remoteDomainSetVcpusFlags (virDomainPtr domain, unsigned int nvcpus,
+                           unsigned int flags)
+{
+    int rv = -1;
+    remote_domain_set_vcpus_flags_args args;
+    struct private_data *priv = domain->conn->privateData;
+
+    remoteDriverLock(priv);
+
+    make_nonnull_domain (&args.dom, domain);
+    args.nvcpus = nvcpus;
+    args.flags = flags;
+
+    if (call (domain->conn, priv, 0, REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS,
+              (xdrproc_t) xdr_remote_domain_set_vcpus_flags_args,
+              (char *) &args,
+              (xdrproc_t) xdr_void, (char *) NULL) == -1)
+        goto done;
+
+    rv = 0;
+
+done:
+    remoteDriverUnlock(priv);
+    return rv;
+}
+
+static int
+remoteDomainGetVcpusFlags (virDomainPtr domain, unsigned int flags)
+{
+    int rv = -1;
+    remote_domain_get_vcpus_flags_args args;
+    remote_domain_get_vcpus_flags_ret ret;
+    struct private_data *priv = domain->conn->privateData;
+
+    remoteDriverLock(priv);
+
+    make_nonnull_domain (&args.dom, domain);
+    args.flags = flags;
+
+    memset (&ret, 0, sizeof ret);
+    if (call (domain->conn, priv, 0, REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS,
+              (xdrproc_t) xdr_remote_domain_get_vcpus_flags_args, (char *) &args,
+              (xdrproc_t) xdr_remote_domain_get_vcpus_flags_ret, (char *) &ret) == -1)
+        goto done;
+
+    rv = ret.num;
+
+done:
+    remoteDriverUnlock(priv);
+    return rv;
+}
+
+static int
+ remoteDomainPinVcpu (virDomainPtr domain,
+                      unsigned int vcpu,
+                      unsigned char *cpumap,
+@@ -10468,8 +10521,8 @@ static virDriver remote_driver = {
+     remoteDomainRestore, /* domainRestore */
+     remoteDomainCoreDump, /* domainCoreDump */
+     remoteDomainSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    remoteDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    remoteDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     remoteDomainPinVcpu, /* domainPinVcpu */
+     remoteDomainGetVcpus, /* domainGetVcpus */
+     remoteDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/remote/remote_protocol.c b/src/remote/remote_protocol.c
+index 5c55713..38ea050 100644
+--- a/src/remote/remote_protocol.c
+++ b/src/remote/remote_protocol.c
+@@ -1355,6 +1355,39 @@ xdr_remote_domain_set_vcpus_args (XDR *xdrs, remote_domain_set_vcpus_args *objp)
+ }
+
+ bool_t
+xdr_remote_domain_set_vcpus_flags_args (XDR *xdrs, remote_domain_set_vcpus_flags_args *objp)
+{
+
+         if (!xdr_remote_nonnull_domain (xdrs, &objp->dom))
+                 return FALSE;
+         if (!xdr_u_int (xdrs, &objp->nvcpus))
+                 return FALSE;
+         if (!xdr_u_int (xdrs, &objp->flags))
+                 return FALSE;
+        return TRUE;
+}
+
+bool_t
+xdr_remote_domain_get_vcpus_flags_args (XDR *xdrs, remote_domain_get_vcpus_flags_args *objp)
+{
+
+         if (!xdr_remote_nonnull_domain (xdrs, &objp->dom))
+                 return FALSE;
+         if (!xdr_u_int (xdrs, &objp->flags))
+                 return FALSE;
+        return TRUE;
+}
+
+bool_t
+xdr_remote_domain_get_vcpus_flags_ret (XDR *xdrs, remote_domain_get_vcpus_flags_ret *objp)
+{
+
+         if (!xdr_int (xdrs, &objp->num))
+                 return FALSE;
+        return TRUE;
+}
+
+bool_t
+ xdr_remote_domain_pin_vcpu_args (XDR *xdrs, remote_domain_pin_vcpu_args *objp)
+ {
+         char **objp_cpp0 = (char **) (void *) &objp->cpumap.cpumap_val;
+diff --git a/src/remote/remote_protocol.h b/src/remote/remote_protocol.h
+index 756da11..d75e76c 100644
+--- a/src/remote/remote_protocol.h
+++ b/src/remote/remote_protocol.h
+@@ -750,6 +750,24 @@ struct remote_domain_set_vcpus_args {
+ };
+ typedef struct remote_domain_set_vcpus_args remote_domain_set_vcpus_args;
+
+struct remote_domain_set_vcpus_flags_args {
+        remote_nonnull_domain dom;
+        u_int nvcpus;
+        u_int flags;
+};
+typedef struct remote_domain_set_vcpus_flags_args remote_domain_set_vcpus_flags_args;
+
+struct remote_domain_get_vcpus_flags_args {
+        remote_nonnull_domain dom;
+        u_int flags;
+};
+typedef struct remote_domain_get_vcpus_flags_args remote_domain_get_vcpus_flags_args;
+
+struct remote_domain_get_vcpus_flags_ret {
+        int num;
+};
+typedef struct remote_domain_get_vcpus_flags_ret remote_domain_get_vcpus_flags_ret;
+
+ struct remote_domain_pin_vcpu_args {
+         remote_nonnull_domain dom;
+         int vcpu;
+@@ -2281,6 +2299,8 @@ enum remote_procedure {
+         REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS = 196,
+         REMOTE_PROC_DOMAIN_SET_MEMORY_PARAMETERS = 197,
+         REMOTE_PROC_DOMAIN_GET_MEMORY_PARAMETERS = 198,
+        REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS = 199,
+        REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS = 200,
+ };
+ typedef enum remote_procedure remote_procedure;
+
+@@ -2422,6 +2442,9 @@ extern  bool_t xdr_remote_domain_define_xml_args (XDR *, remote_domain_define_xm
+ extern  bool_t xdr_remote_domain_define_xml_ret (XDR *, remote_domain_define_xml_ret*);
+ extern  bool_t xdr_remote_domain_undefine_args (XDR *, remote_domain_undefine_args*);
+ extern  bool_t xdr_remote_domain_set_vcpus_args (XDR *, remote_domain_set_vcpus_args*);
+extern  bool_t xdr_remote_domain_set_vcpus_flags_args (XDR *, remote_domain_set_vcpus_flags_args*);
+extern  bool_t xdr_remote_domain_get_vcpus_flags_args (XDR *, remote_domain_get_vcpus_flags_args*);
+extern  bool_t xdr_remote_domain_get_vcpus_flags_ret (XDR *, remote_domain_get_vcpus_flags_ret*);
+ extern  bool_t xdr_remote_domain_pin_vcpu_args (XDR *, remote_domain_pin_vcpu_args*);
+ extern  bool_t xdr_remote_domain_get_vcpus_args (XDR *, remote_domain_get_vcpus_args*);
+ extern  bool_t xdr_remote_domain_get_vcpus_ret (XDR *, remote_domain_get_vcpus_ret*);
+@@ -2762,6 +2785,9 @@ extern bool_t xdr_remote_domain_define_xml_args ();
+ extern bool_t xdr_remote_domain_define_xml_ret ();
+ extern bool_t xdr_remote_domain_undefine_args ();
+ extern bool_t xdr_remote_domain_set_vcpus_args ();
+extern bool_t xdr_remote_domain_set_vcpus_flags_args ();
+extern bool_t xdr_remote_domain_get_vcpus_flags_args ();
+extern bool_t xdr_remote_domain_get_vcpus_flags_ret ();
+ extern bool_t xdr_remote_domain_pin_vcpu_args ();
+ extern bool_t xdr_remote_domain_get_vcpus_args ();
+ extern bool_t xdr_remote_domain_get_vcpus_ret ();
+diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x
+index e80fb5f..d57e6d0 100644
+--- a/src/remote/remote_protocol.x
+++ b/src/remote/remote_protocol.x
+@@ -768,6 +768,21 @@ struct remote_domain_set_vcpus_args {
+     int nvcpus;
+ };
+
+struct remote_domain_set_vcpus_flags_args {
+    remote_nonnull_domain dom;
+    unsigned int nvcpus;
+    unsigned int flags;
+};
+
+struct remote_domain_get_vcpus_flags_args {
+    remote_nonnull_domain dom;
+    unsigned int flags;
+};
+
+struct remote_domain_get_vcpus_flags_ret {
+    int num;
+};
+
+ struct remote_domain_pin_vcpu_args {
+     remote_nonnull_domain dom;
+     int vcpu;
+@@ -2062,7 +2077,9 @@ enum remote_procedure {
+     REMOTE_PROC_DOMAIN_EVENT_IO_ERROR_REASON = 195,
+     REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS = 196,
+     REMOTE_PROC_DOMAIN_SET_MEMORY_PARAMETERS = 197,
+-    REMOTE_PROC_DOMAIN_GET_MEMORY_PARAMETERS = 198
+    REMOTE_PROC_DOMAIN_GET_MEMORY_PARAMETERS = 198,
+    REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS = 199,
+    REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS = 200
+
+     /*
+      * Notice how the entries are grouped in sets of 10 ?
+diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs
+index 838423e..d505886 100644
+--- a/src/remote_protocol-structs
+++ b/src/remote_protocol-structs
+@@ -461,6 +461,18 @@ struct remote_domain_set_vcpus_args {
+ 	remote_nonnull_domain      dom;
+ 	int                        nvcpus;
+ };
+struct remote_domain_set_vcpus_flags_args {
+	remote_nonnull_domain      dom;
+	u_int                      nvcpus;
+	u_int                      flags;
+};
+struct remote_domain_get_vcpus_flags_args {
+	remote_nonnull_domain      dom;
+	u_int                      flags;
+};
+struct remote_domain_get_vcpus_flags_ret {
+	int                        num;
+};
+ struct remote_domain_pin_vcpu_args {
+ 	remote_nonnull_domain      dom;
+ 	int                        vcpu;
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0006-make-old-API-trivially-wrap-to-new-API.patch
+++ b/docs/api_extension/0006-make-old-API-trivially-wrap-to-new-API.patch
@@ -0,0 +1,735 @@
+From 50c51f13e2af04afac46e181c4ed62581545a488 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Mon, 27 Sep 2010 16:37:53 -0600
+Subject: [PATCH 06/15] vcpu: make old API trivially wrap to new API
+
+Note - this wrapping is completely mechanical; the old API will
+function identically, since the new API validates that the exact
+same flags are provided by the old API.  On a per-driver basis,
+it may make sense to have the old API pass a different set of flags,
+but that should be done in the per-driver patch that implements
+the full range of flag support in the new API.
+
+* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
+Move guts...
+(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
+functions.
+(esxDriver): Trivially support the new API.
+* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
+(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
+(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
+* src/phyp/phyp_driver.c (phypDomainSetCPU)
+(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
+(phypDomainGetVcpusFlags, phypDriver): Likewise.
+* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
+(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
+(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
+* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
+(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
+Likewise.
+* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
+(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
+(virDomainGetVcpusFlags, virDriver): Likewise.
+* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
+(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
+(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
+* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
+(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
+(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
+(xenapiError): New helper macro.
+---
+ src/esx/esx_driver.c       |   32 +++++++++++++++++++---
+ src/openvz/openvz_driver.c |   34 +++++++++++++++++++++---
+ src/phyp/phyp_driver.c     |   32 ++++++++++++++++++++---
+ src/qemu/qemu_driver.c     |   38 +++++++++++++++++++++++++---
+ src/test/test_driver.c     |   36 ++++++++++++++++++++++---
+ src/vbox/vbox_tmpl.c       |   36 +++++++++++++++++++++++---
+ src/xen/xen_driver.c       |   34 ++++++++++++++++++++++---
+ src/xenapi/xenapi_driver.c |   60 ++++++++++++++++++++++++++++++++++++++------
+ 8 files changed, 263 insertions(+), 39 deletions(-)
+
+diff --git a/src/esx/esx_driver.c b/src/esx/esx_driver.c
+index 2a32374..b3e1284 100644
+--- a/src/esx/esx_driver.c
+++ b/src/esx/esx_driver.c
+@@ -2384,7 +2384,8 @@ esxDomainGetInfo(virDomainPtr domain, virDomainInfoPtr info)
+
+
+ static int
+-esxDomainSetVcpus(virDomainPtr domain, unsigned int nvcpus)
+esxDomainSetVcpusFlags(virDomainPtr domain, unsigned int nvcpus,
+                       unsigned int flags)
+ {
+     int result = -1;
+     esxPrivate *priv = domain->conn->privateData;
+@@ -2394,6 +2395,11 @@ esxDomainSetVcpus(virDomainPtr domain, unsigned int nvcpus)
+     esxVI_ManagedObjectReference *task = NULL;
+     esxVI_TaskInfoState taskInfoState;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        ESX_ERROR(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     if (nvcpus < 1) {
+         ESX_ERROR(VIR_ERR_INVALID_ARG, "%s",
+                   _("Requested number of virtual CPUs must at least be 1"));
+@@ -2453,15 +2459,26 @@ esxDomainSetVcpus(virDomainPtr domain, unsigned int nvcpus)
+ }
+
+
+static int
+esxDomainSetVcpus(virDomainPtr domain, unsigned int nvcpus)
+{
+    return esxDomainSetVcpusFlags(domain, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+
+ static int
+-esxDomainGetMaxVcpus(virDomainPtr domain)
+esxDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags)
+ {
+     esxPrivate *priv = domain->conn->privateData;
+     esxVI_String *propertyNameList = NULL;
+     esxVI_ObjectContent *hostSystem = NULL;
+     esxVI_DynamicProperty *dynamicProperty = NULL;
+
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        ESX_ERROR(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     if (priv->maxVcpus > 0) {
+         return priv->maxVcpus;
+     }
+@@ -2507,7 +2524,12 @@ esxDomainGetMaxVcpus(virDomainPtr domain)
+     return priv->maxVcpus;
+ }
+
+-
+static int
+esxDomainGetMaxVcpus(virDomainPtr domain)
+{
+    return esxDomainGetVcpusFlags(domain, (VIR_DOMAIN_VCPU_LIVE |
+                                           VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+ static char *
+ esxDomainDumpXML(virDomainPtr domain, int flags)
+@@ -4160,8 +4182,8 @@ static virDriver esxDriver = {
+     NULL,                            /* domainRestore */
+     NULL,                            /* domainCoreDump */
+     esxDomainSetVcpus,               /* domainSetVcpus */
+-    NULL,                            /* domainSetVcpusFlags */
+-    NULL,                            /* domainGetVcpusFlags */
+    esxDomainSetVcpusFlags,          /* domainSetVcpusFlags */
+    esxDomainGetVcpusFlags,          /* domainGetVcpusFlags */
+     NULL,                            /* domainPinVcpu */
+     NULL,                            /* domainGetVcpus */
+     esxDomainGetMaxVcpus,            /* domainGetMaxVcpus */
+diff --git a/src/openvz/openvz_driver.c b/src/openvz/openvz_driver.c
+index 9d19aeb..0f3cfdf 100644
+--- a/src/openvz/openvz_driver.c
+++ b/src/openvz/openvz_driver.c
+@@ -67,7 +67,6 @@
+ static int openvzGetProcessInfo(unsigned long long *cpuTime, int vpsid);
+ static int openvzGetMaxVCPUs(virConnectPtr conn, const char *type);
+ static int openvzDomainGetMaxVcpus(virDomainPtr dom);
+-static int openvzDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus);
+ static int openvzDomainSetVcpusInternal(virDomainObjPtr vm,
+                                         unsigned int nvcpus);
+ static int openvzDomainSetMemoryInternal(virDomainObjPtr vm,
+@@ -1211,11 +1210,24 @@ static int openvzGetMaxVCPUs(virConnectPtr conn ATTRIBUTE_UNUSED,
+     return -1;
+ }
+
+static int
+openvzDomainGetVcpusFlags(virDomainPtr dom ATTRIBUTE_UNUSED,
+                          unsigned int flags)
+{
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        openvzError(VIR_ERR_INVALID_ARG, _("unsupported flags (0x%x)"), flags);
+        return -1;
+    }
+
+-static int openvzDomainGetMaxVcpus(virDomainPtr dom ATTRIBUTE_UNUSED) {
+     return openvzGetMaxVCPUs(NULL, "openvz");
+ }
+
+static int openvzDomainGetMaxVcpus(virDomainPtr dom)
+{
+    return openvzDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_LIVE |
+                                           VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+ static int openvzDomainSetVcpusInternal(virDomainObjPtr vm,
+                                         unsigned int nvcpus)
+ {
+@@ -1241,12 +1253,18 @@ static int openvzDomainSetVcpusInternal(virDomainObjPtr vm,
+     return 0;
+ }
+
+-static int openvzDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus)
+static int openvzDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+                                     unsigned int flags)
+ {
+     virDomainObjPtr         vm;
+     struct openvz_driver   *driver = dom->conn->privateData;
+     int                     ret = -1;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        openvzError(VIR_ERR_INVALID_ARG, _("unsupported flags (0x%x)"), flags);
+        return -1;
+    }
+
+     openvzDriverLock(driver);
+     vm = virDomainFindByUUID(&driver->domains, dom->uuid);
+     openvzDriverUnlock(driver);
+@@ -1272,6 +1290,12 @@ cleanup:
+     return ret;
+ }
+
+static int
+openvzDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus)
+{
+    return openvzDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+ static virDrvOpenStatus openvzOpen(virConnectPtr conn,
+                                    virConnectAuthPtr auth ATTRIBUTE_UNUSED,
+                                    int flags ATTRIBUTE_UNUSED)
+@@ -1590,8 +1614,8 @@ static virDriver openvzDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     openvzDomainSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    openvzDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    openvzDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     openvzDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/phyp/phyp_driver.c b/src/phyp/phyp_driver.c
+index 6e0a5e9..e284ae0 100644
+--- a/src/phyp/phyp_driver.c
+++ b/src/phyp/phyp_driver.c
+@@ -1497,15 +1497,27 @@ phypGetLparCPU(virConnectPtr conn, const char *managed_system, int lpar_id)
+ }
+
+ static int
+-phypGetLparCPUMAX(virDomainPtr dom)
+phypDomainGetVcpusFlags(virDomainPtr dom, unsigned int flags)
+ {
+     phyp_driverPtr phyp_driver = dom->conn->privateData;
+     char *managed_system = phyp_driver->managed_system;
+
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        PHYP_ERROR(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     return phypGetLparCPUGeneric(dom->conn, managed_system, dom->id, 1);
+ }
+
+ static int
+phypGetLparCPUMAX(virDomainPtr dom)
+{
+    return phypDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_LIVE |
+                                         VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+static int
+ phypGetRemoteSlot(virConnectPtr conn, const char *managed_system,
+                   const char *lpar_name)
+ {
+@@ -3831,7 +3843,8 @@ phypConnectGetCapabilities(virConnectPtr conn)
+ }
+
+ static int
+-phypDomainSetCPU(virDomainPtr dom, unsigned int nvcpus)
+phypDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+                        unsigned int flags)
+ {
+     ConnectionData *connection_data = dom->conn->networkPrivateData;
+     phyp_driverPtr phyp_driver = dom->conn->privateData;
+@@ -3846,6 +3859,11 @@ phypDomainSetCPU(virDomainPtr dom, unsigned int nvcpus)
+     unsigned int amount = 0;
+     virBuffer buf = VIR_BUFFER_INITIALIZER;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        PHYP_ERROR(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     if ((ncpus = phypGetLparCPU(dom->conn, managed_system, dom->id)) == 0)
+         return 0;
+
+@@ -3891,6 +3909,12 @@ phypDomainSetCPU(virDomainPtr dom, unsigned int nvcpus)
+
+ }
+
+static int
+phypDomainSetCPU(virDomainPtr dom, unsigned int nvcpus)
+{
+    return phypDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+ static virDrvOpenStatus
+ phypVIOSDriverOpen(virConnectPtr conn,
+                    virConnectAuthPtr auth ATTRIBUTE_UNUSED,
+@@ -3941,8 +3965,8 @@ static virDriver phypDriver = {
+     NULL,                       /* domainRestore */
+     NULL,                       /* domainCoreDump */
+     phypDomainSetCPU,           /* domainSetVcpus */
+-    NULL,                       /* domainSetVcpusFlags */
+-    NULL,                       /* domainGetVcpusFlags */
+    phypDomainSetVcpusFlags,    /* domainSetVcpusFlags */
+    phypDomainGetVcpusFlags,    /* domainGetVcpusFlags */
+     NULL,                       /* domainPinVcpu */
+     NULL,                       /* domainGetVcpus */
+     phypGetLparCPUMAX,          /* domainGetMaxVcpus */
+diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
+index 3d17e04..7a2ea8f 100644
+--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
+@@ -5934,13 +5934,22 @@ unsupported:
+ }
+
+
+-static int qemudDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus) {
+static int
+qemudDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+                         unsigned int flags)
+{
+     struct qemud_driver *driver = dom->conn->privateData;
+     virDomainObjPtr vm;
+     const char * type;
+     int max;
+     int ret = -1;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        qemuReportError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+                        flags);
+        return -1;
+    }
+
+     qemuDriverLock(driver);
+     vm = virDomainFindByUUID(&driver->domains, dom->uuid);
+     qemuDriverUnlock(driver);
+@@ -5994,6 +6003,12 @@ cleanup:
+     return ret;
+ }
+
+static int
+qemudDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus)
+{
+    return qemudDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+
+ static int
+ qemudDomainPinVcpu(virDomainPtr dom,
+@@ -6150,12 +6165,20 @@ cleanup:
+ }
+
+
+-static int qemudDomainGetMaxVcpus(virDomainPtr dom) {
+static int
+qemudDomainGetVcpusFlags(virDomainPtr dom, unsigned int flags)
+{
+     struct qemud_driver *driver = dom->conn->privateData;
+     virDomainObjPtr vm;
+     const char *type;
+     int ret = -1;
+
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        qemuReportError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+                        flags);
+        return -1;
+    }
+
+     qemuDriverLock(driver);
+     vm = virDomainFindByUUID(&driver->domains, dom->uuid);
+     qemuDriverUnlock(driver);
+@@ -6183,6 +6206,13 @@ cleanup:
+     return ret;
+ }
+
+static int
+qemudDomainGetMaxVcpus(virDomainPtr dom)
+{
+    return qemudDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_LIVE |
+                                          VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+ static int qemudDomainGetSecurityLabel(virDomainPtr dom, virSecurityLabelPtr seclabel)
+ {
+     struct qemud_driver *driver = (struct qemud_driver *)dom->conn->privateData;
+@@ -12938,8 +12968,8 @@ static virDriver qemuDriver = {
+     qemudDomainRestore, /* domainRestore */
+     qemudDomainCoreDump, /* domainCoreDump */
+     qemudDomainSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    qemudDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    qemudDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     qemudDomainPinVcpu, /* domainPinVcpu */
+     qemudDomainGetVcpus, /* domainGetVcpus */
+     qemudDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/test/test_driver.c b/src/test/test_driver.c
+index 6a00558..b70c80d 100644
+--- a/src/test/test_driver.c
+++ b/src/test/test_driver.c
+@@ -2029,17 +2029,37 @@ cleanup:
+     return ret;
+ }
+
+-static int testDomainGetMaxVcpus(virDomainPtr domain)
+static int
+testDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags)
+ {
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        testError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     return testGetMaxVCPUs(domain->conn, "test");
+ }
+
+-static int testSetVcpus(virDomainPtr domain,
+-                        unsigned int nrCpus) {
+static int
+testDomainGetMaxVcpus(virDomainPtr domain)
+{
+    return testDomainGetVcpusFlags(domain, (VIR_DOMAIN_VCPU_LIVE |
+                                            VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+static int
+testDomainSetVcpusFlags(virDomainPtr domain, unsigned int nrCpus,
+                        unsigned int flags)
+{
+     testConnPtr privconn = domain->conn->privateData;
+     virDomainObjPtr privdom = NULL;
+     int ret = -1, maxvcpus;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        testError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     /* Do this first before locking */
+     maxvcpus = testDomainGetMaxVcpus(domain);
+     if (maxvcpus < 0)
+@@ -2082,6 +2102,12 @@ cleanup:
+     return ret;
+ }
+
+static int
+testSetVcpus(virDomainPtr domain, unsigned int nrCpus)
+{
+    return testDomainSetVcpusFlags(domain, nrCpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+ static int testDomainGetVcpus(virDomainPtr domain,
+                               virVcpuInfoPtr info,
+                               int maxinfo,
+@@ -5260,8 +5286,8 @@ static virDriver testDriver = {
+     testDomainRestore, /* domainRestore */
+     testDomainCoreDump, /* domainCoreDump */
+     testSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    testDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    testDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     testDomainPinVcpu, /* domainPinVcpu */
+     testDomainGetVcpus, /* domainGetVcpus */
+     testDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/vbox/vbox_tmpl.c b/src/vbox/vbox_tmpl.c
+index cb9193a..0cbe8b3 100644
+--- a/src/vbox/vbox_tmpl.c
+++ b/src/vbox/vbox_tmpl.c
+@@ -1839,13 +1839,21 @@ cleanup:
+     return ret;
+ }
+
+-static int vboxDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus) {
+static int
+vboxDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+                        unsigned int flags)
+{
+     VBOX_OBJECT_CHECK(dom->conn, int, -1);
+     IMachine *machine    = NULL;
+     vboxIID  *iid        = NULL;
+     PRUint32  CPUCount   = nvcpus;
+     nsresult rc;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        vboxError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+ #if VBOX_API_VERSION == 2002
+     if (VIR_ALLOC(iid) < 0) {
+         virReportOOMError();
+@@ -1887,11 +1895,24 @@ cleanup:
+     return ret;
+ }
+
+-static int vboxDomainGetMaxVcpus(virDomainPtr dom) {
+static int
+vboxDomainSetVcpus(virDomainPtr dom, unsigned int nvcpus)
+{
+    return vboxDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+static int
+vboxDomainGetVcpusFlags(virDomainPtr dom, unsigned int flags)
+{
+     VBOX_OBJECT_CHECK(dom->conn, int, -1);
+     ISystemProperties *systemProperties = NULL;
+     PRUint32 maxCPUCount = 0;
+
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        vboxError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+        return -1;
+    }
+
+     /* Currently every domain supports the same number of max cpus
+      * as that supported by vbox and thus take it directly from
+      * the systemproperties.
+@@ -1909,6 +1930,13 @@ static int vboxDomainGetMaxVcpus(virDomainPtr dom) {
+     return ret;
+ }
+
+static int
+vboxDomainGetMaxVcpus(virDomainPtr dom)
+{
+    return vboxDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_LIVE |
+                                         VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+ static char *vboxDomainDumpXML(virDomainPtr dom, int flags) {
+     VBOX_OBJECT_CHECK(dom->conn, char *, NULL);
+     virDomainDefPtr def  = NULL;
+@@ -8267,8 +8295,8 @@ virDriver NAME(Driver) = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     vboxDomainSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    vboxDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    vboxDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+     vboxDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/xen/xen_driver.c b/src/xen/xen_driver.c
+index 7d67ced..d6c9c57 100644
+--- a/src/xen/xen_driver.c
+++ b/src/xen/xen_driver.c
+@@ -1069,11 +1069,18 @@ xenUnifiedDomainCoreDump (virDomainPtr dom, const char *to, int flags)
+ }
+
+ static int
+-xenUnifiedDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+xenUnifiedDomainSetVcpusFlags (virDomainPtr dom, unsigned int nvcpus,
+                               unsigned int flags)
+ {
+     GET_PRIVATE(dom->conn);
+     int i;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        xenUnifiedError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+                        flags);
+        return -1;
+    }
+
+     /* Try non-hypervisor methods first, then hypervisor direct method
+      * as a last resort.
+      */
+@@ -1093,6 +1100,12 @@ xenUnifiedDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+ }
+
+ static int
+xenUnifiedDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+{
+    return xenUnifiedDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+static int
+ xenUnifiedDomainPinVcpu (virDomainPtr dom, unsigned int vcpu,
+                          unsigned char *cpumap, int maplen)
+ {
+@@ -1126,11 +1139,17 @@ xenUnifiedDomainGetVcpus (virDomainPtr dom,
+ }
+
+ static int
+-xenUnifiedDomainGetMaxVcpus (virDomainPtr dom)
+xenUnifiedDomainGetVcpusFlags (virDomainPtr dom, unsigned int flags)
+ {
+     GET_PRIVATE(dom->conn);
+     int i, ret;
+
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        xenUnifiedError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+                        flags);
+        return -1;
+    }
+
+     for (i = 0; i < XEN_UNIFIED_NR_DRIVERS; ++i)
+         if (priv->opened[i] && drivers[i]->domainGetMaxVcpus) {
+             ret = drivers[i]->domainGetMaxVcpus (dom);
+@@ -1140,6 +1159,13 @@ xenUnifiedDomainGetMaxVcpus (virDomainPtr dom)
+     return -1;
+ }
+
+static int
+xenUnifiedDomainGetMaxVcpus (virDomainPtr dom)
+{
+    return xenUnifiedDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_LIVE |
+                                               VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+ static char *
+ xenUnifiedDomainDumpXML (virDomainPtr dom, int flags)
+ {
+@@ -1951,8 +1977,8 @@ static virDriver xenUnifiedDriver = {
+     xenUnifiedDomainRestore, /* domainRestore */
+     xenUnifiedDomainCoreDump, /* domainCoreDump */
+     xenUnifiedDomainSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    xenUnifiedDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    xenUnifiedDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     xenUnifiedDomainPinVcpu, /* domainPinVcpu */
+     xenUnifiedDomainGetVcpus, /* domainGetVcpus */
+     xenUnifiedDomainGetMaxVcpus, /* domainGetMaxVcpus */
+diff --git a/src/xenapi/xenapi_driver.c b/src/xenapi/xenapi_driver.c
+index 753169c..7d4ab8d 100644
+--- a/src/xenapi/xenapi_driver.c
+++ b/src/xenapi/xenapi_driver.c
+@@ -40,6 +40,11 @@
+ #include "xenapi_driver_private.h"
+ #include "xenapi_utils.h"
+
+#define VIR_FROM_THIS VIR_FROM_XENAPI
+
+#define xenapiError(code, ...)                                    \
+        virReportErrorHelper(NULL, VIR_FROM_THIS, code, __FILE__, \
+                             __FUNCTION__, __LINE__, __VA_ARGS__)
+
+ /*
+  * getCapsObject
+@@ -987,19 +992,26 @@ xenapiDomainGetInfo (virDomainPtr dom, virDomainInfoPtr info)
+
+
+ /*
+- * xenapiDomainSetVcpus
+ * xenapiDomainSetVcpusFlags
+  *
+  * Sets the VCPUs on the domain
+  * Return 0 on success or -1 in case of error
+  */
+ static int
+-xenapiDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+xenapiDomainSetVcpusFlags (virDomainPtr dom, unsigned int nvcpus,
+                           unsigned int flags)
+ {
+-
+     /* vm.set_vcpus_max */
+     xen_vm vm;
+     xen_vm_set *vms;
+     xen_session *session = ((struct _xenapiPrivate *)(dom->conn->privateData))->session;
+
+    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+        xenapiError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+                    flags);
+        return -1;
+    }
+
+     if (xen_vm_get_by_name_label(session, &vms, dom->name) && vms->size > 0) {
+         if (vms->size != 1) {
+             xenapiSessionErrorHandler(dom->conn, VIR_ERR_INTERNAL_ERROR,
+@@ -1019,6 +1031,18 @@ xenapiDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+ }
+
+ /*
+ * xenapiDomainSetVcpus
+ *
+ * Sets the VCPUs on the domain
+ * Return 0 on success or -1 in case of error
+ */
+static int
+xenapiDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+{
+    return xenapiDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+}
+
+/*
+  * xenapiDomainPinVcpu
+  *
+  * Dynamically change the real CPUs which can be allocated to a virtual CPU
+@@ -1140,19 +1164,26 @@ xenapiDomainGetVcpus (virDomainPtr dom,
+ }
+
+ /*
+- * xenapiDomainGetMaxVcpus
+ * xenapiDomainGetVcpusFlags
+  *
+  *
+- * Returns maximum number of Vcpus on success or -1 in case of error
+ * Returns Vcpus count on success or -1 in case of error
+  */
+ static int
+-xenapiDomainGetMaxVcpus (virDomainPtr dom)
+xenapiDomainGetVcpusFlags (virDomainPtr dom, unsigned int flags)
+ {
+     xen_vm vm;
+     xen_vm_set *vms;
+     int64_t maxvcpu = 0;
+     enum xen_vm_power_state state;
+     xen_session *session = ((struct _xenapiPrivate *)(dom->conn->privateData))->session;
+
+    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+        xenapiError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+                    flags);
+        return -1;
+    }
+
+     if (xen_vm_get_by_name_label(session, &vms, dom->name) && vms->size > 0) {
+         if (vms->size != 1) {
+             xenapiSessionErrorHandler(dom->conn, VIR_ERR_INTERNAL_ERROR,
+@@ -1176,6 +1207,19 @@ xenapiDomainGetMaxVcpus (virDomainPtr dom)
+ }
+
+ /*
+ * xenapiDomainGetMaxVcpus
+ *
+ *
+ * Returns maximum number of Vcpus on success or -1 in case of error
+ */
+static int
+xenapiDomainGetMaxVcpus (virDomainPtr dom)
+{
+    return xenapiDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_LIVE |
+                                           VIR_DOMAIN_VCPU_MAXIMUM));
+}
+
+/*
+  * xenapiDomainDumpXML
+  *
+  *
+@@ -1754,8 +1798,8 @@ static virDriver xenapiDriver = {
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+     xenapiDomainSetVcpus, /* domainSetVcpus */
+-    NULL, /* domainSetVcpusFlags */
+-    NULL, /* domainGetVcpusFlags */
+    xenapiDomainSetVcpusFlags, /* domainSetVcpusFlags */
+    xenapiDomainGetVcpusFlags, /* domainGetVcpusFlags */
+     xenapiDomainPinVcpu, /* domainPinVcpu */
+     xenapiDomainGetVcpus, /* domainGetVcpus */
+     xenapiDomainGetMaxVcpus, /* domainGetMaxVcpus */
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0007-add-virsh-support.patch
+++ b/docs/api_extension/0007-add-virsh-support.patch
@@ -0,0 +1,388 @@
+From bf945ee97b72d3b0c4fc2da04530f5294f529d66 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Wed, 29 Sep 2010 15:20:23 -0600
+Subject: [PATCH 08/15] vcpu: add virsh support
+
+* tools/virsh.c (cmdSetvcpus): Add new flags.  Let invalid
+commands through to driver, to ease testing of hypervisor argument
+validation.
+(cmdMaxvcpus, cmdVcpucount): New commands.
+(commands): Add new commands.
+* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
+behavior.
+---
+ tools/virsh.c   |  247 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
+ tools/virsh.pod |   38 ++++++++-
+ 2 files changed, 262 insertions(+), 23 deletions(-)
+
+diff --git a/tools/virsh.c b/tools/virsh.c
+index 4f8c495..7fb7fbd 100644
+--- a/tools/virsh.c
+++ b/tools/virsh.c
+@@ -2281,10 +2281,216 @@ cmdFreecell(vshControl *ctl, const vshCmd *cmd)
+ }
+
+ /*
+ * "maxvcpus" command
+ */
+static const vshCmdInfo info_maxvcpus[] = {
+    {"help", N_("connection vcpu maximum")},
+    {"desc", N_("Show maximum number of virtual CPUs for guests on this connection.")},
+    {NULL, NULL}
+};
+
+static const vshCmdOptDef opts_maxvcpus[] = {
+    {"type", VSH_OT_STRING, 0, N_("domain type")},
+    {NULL, 0, 0, NULL}
+};
+
+static int
+cmdMaxvcpus(vshControl *ctl, const vshCmd *cmd)
+{
+    char *type;
+    int vcpus;
+
+    type = vshCommandOptString(cmd, "type", NULL);
+
+    if (!vshConnectionUsability(ctl, ctl->conn))
+        return FALSE;
+
+    vcpus = virConnectGetMaxVcpus(ctl->conn, type);
+    if (vcpus < 0)
+        return FALSE;
+    vshPrint(ctl, "%d\n", vcpus);
+
+    return TRUE;
+}
+
+/*
+ * "vcpucount" command
+ */
+static const vshCmdInfo info_vcpucount[] = {
+    {"help", N_("domain vcpu counts")},
+    {"desc", N_("Returns the number of virtual CPUs used by the domain.")},
+    {NULL, NULL}
+};
+
+static const vshCmdOptDef opts_vcpucount[] = {
+    {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")},
+    {"maximum", VSH_OT_BOOL, 0, N_("get maximum cap on vcpus")},
+    {"current", VSH_OT_BOOL, 0, N_("get current vcpu usage")},
+    {"config", VSH_OT_BOOL, 0, N_("get value to be used on next boot")},
+    {"live", VSH_OT_BOOL, 0, N_("get value from running domain")},
+    {NULL, 0, 0, NULL}
+};
+
+static int
+cmdVcpucount(vshControl *ctl, const vshCmd *cmd)
+{
+    virDomainPtr dom;
+    int ret = TRUE;
+    int maximum = vshCommandOptBool(cmd, "maximum");
+    int current = vshCommandOptBool(cmd, "current");
+    int config = vshCommandOptBool(cmd, "config");
+    int live = vshCommandOptBool(cmd, "live");
+    bool all = maximum + current + config + live == 0;
+    int count;
+
+    if (maximum && current) {
+        vshError(ctl, "%s",
+                 _("--maximum and --current cannot both be specified"));
+        return FALSE;
+    }
+    if (config && live) {
+        vshError(ctl, "%s",
+                 _("--config and --live cannot both be specified"));
+        return FALSE;
+    }
+    /* We want one of each pair of mutually exclusive options; that
+     * is, use of flags requires exactly two options.  */
+    if (maximum + current + config + live == 1) {
+        vshError(ctl,
+                 _("when using --%s, either --%s or --%s must be specified"),
+                 (maximum ? "maximum" : current ? "current"
+                  : config ? "config" : "live"),
+                 maximum + current ? "config" : "maximum",
+                 maximum + current ? "live" : "current");
+        return FALSE;
+    }
+
+    if (!vshConnectionUsability(ctl, ctl->conn))
+        return FALSE;
+
+    if (!(dom = vshCommandOptDomain(ctl, cmd, NULL)))
+        return FALSE;
+
+    /* In all cases, try the new API first; if it fails because we are
+     * talking to an older client, try a fallback API before giving
+     * up.  */
+    if (all || (maximum && config)) {
+        count = virDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_MAXIMUM |
+                                             VIR_DOMAIN_VCPU_CONFIG));
+        if (count < 0 && (last_error->code == VIR_ERR_NO_SUPPORT
+                          || last_error->code == VIR_ERR_INVALID_ARG)) {
+            char *tmp;
+            char *xml = virDomainGetXMLDesc(dom, VIR_DOMAIN_XML_INACTIVE);
+            if (xml && (tmp = strstr(xml, "<vcpu"))) {
+                tmp = strchr(tmp, '>');
+                if (!tmp || virStrToLong_i(tmp + 1, &tmp, 10, &count) < 0)
+                    count = -1;
+            }
+            VIR_FREE(xml);
+        }
+
+        if (count < 0) {
+            virshReportError(ctl);
+            ret = FALSE;
+        } else if (all) {
+            vshPrint(ctl, "%-12s %-12s %3d\n", _("maximum"), _("config"),
+                     count);
+        } else {
+            vshPrint(ctl, "%d\n", count);
+        }
+        virFreeError(last_error);
+        last_error = NULL;
+    }
+
+    if (all || (maximum && live)) {
+        count = virDomainGetVcpusFlags(dom, (VIR_DOMAIN_VCPU_MAXIMUM |
+                                             VIR_DOMAIN_VCPU_LIVE));
+        if (count < 0 && (last_error->code == VIR_ERR_NO_SUPPORT
+                          || last_error->code == VIR_ERR_INVALID_ARG)) {
+            count = virDomainGetMaxVcpus(dom);
+        }
+
+        if (count < 0) {
+            virshReportError(ctl);
+            ret = FALSE;
+        } else if (all) {
+            vshPrint(ctl, "%-12s %-12s %3d\n", _("maximum"), _("live"),
+                     count);
+        } else {
+            vshPrint(ctl, "%d\n", count);
+        }
+        virFreeError(last_error);
+        last_error = NULL;
+    }
+
+    if (all || (current && config)) {
+        count = virDomainGetVcpusFlags(dom, VIR_DOMAIN_VCPU_CONFIG);
+        if (count < 0 && (last_error->code == VIR_ERR_NO_SUPPORT
+                          || last_error->code == VIR_ERR_INVALID_ARG)) {
+            char *tmp, *end;
+            char *xml = virDomainGetXMLDesc(dom, VIR_DOMAIN_XML_INACTIVE);
+            if (xml && (tmp = strstr(xml, "<vcpu"))) {
+                end = strchr(tmp, '>');
+                if (end) {
+                    *end = '\0';
+                    tmp = strstr(tmp, "current=");
+                    if (!tmp)
+                        tmp = end + 1;
+                    else {
+                        tmp += strlen("current=");
+                        tmp += *tmp == '\'' || *tmp == '"';
+                    }
+                }
+                if (!tmp || virStrToLong_i(tmp, &tmp, 10, &count) < 0)
+                    count = -1;
+            }
+            VIR_FREE(xml);
+        }
+
+        if (count < 0) {
+            virshReportError(ctl);
+            ret = FALSE;
+        } else if (all) {
+            vshPrint(ctl, "%-12s %-12s %3d\n", _("current"), _("config"),
+                     count);
+        } else {
+            vshPrint(ctl, "%d\n", count);
+        }
+        virFreeError(last_error);
+        last_error = NULL;
+    }
+
+    if (all || (current && live)) {
+        count = virDomainGetVcpusFlags(dom, VIR_DOMAIN_VCPU_LIVE);
+        if (count < 0 && (last_error->code == VIR_ERR_NO_SUPPORT
+                          || last_error->code == VIR_ERR_INVALID_ARG)) {
+            virDomainInfo info;
+            if (virDomainGetInfo(dom, &info) == 0)
+                count = info.nrVirtCpu;
+        }
+
+        if (count < 0) {
+            virshReportError(ctl);
+            ret = FALSE;
+        } else if (all) {
+            vshPrint(ctl, "%-12s %-12s %3d\n", _("current"), _("live"),
+                     count);
+        } else {
+            vshPrint(ctl, "%d\n", count);
+        }
+        virFreeError(last_error);
+        last_error = NULL;
+    }
+
+    virDomainFree(dom);
+    return ret;
+}
+
+/*
+  * "vcpuinfo" command
+  */
+ static const vshCmdInfo info_vcpuinfo[] = {
+-    {"help", N_("domain vcpu information")},
+    {"help", N_("detailed domain vcpu information")},
+     {"desc", N_("Returns basic information about the domain virtual CPUs.")},
+     {NULL, NULL}
+ };
+@@ -2514,6 +2720,9 @@ static const vshCmdInfo info_setvcpus[] = {
+ static const vshCmdOptDef opts_setvcpus[] = {
+     {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")},
+     {"count", VSH_OT_DATA, VSH_OFLAG_REQ, N_("number of virtual CPUs")},
+    {"maximum", VSH_OT_BOOL, 0, N_("set maximum limit on next boot")},
+    {"config", VSH_OT_BOOL, 0, N_("affect next boot")},
+    {"live", VSH_OT_BOOL, 0, N_("affect running domain")},
+     {NULL, 0, 0, NULL}
+ };
+
+@@ -2522,8 +2731,13 @@ cmdSetvcpus(vshControl *ctl, const vshCmd *cmd)
+ {
+     virDomainPtr dom;
+     int count;
+-    int maxcpu;
+     int ret = TRUE;
+    int maximum = vshCommandOptBool(cmd, "maximum");
+    int config = vshCommandOptBool(cmd, "config");
+    int live = vshCommandOptBool(cmd, "live");
+    int flags = ((maximum ? VIR_DOMAIN_VCPU_MAXIMUM : 0) |
+                 (config ? VIR_DOMAIN_VCPU_CONFIG : 0) |
+                 (live ? VIR_DOMAIN_VCPU_LIVE : 0));
+
+     if (!vshConnectionUsability(ctl, ctl->conn))
+         return FALSE;
+@@ -2532,26 +2746,15 @@ cmdSetvcpus(vshControl *ctl, const vshCmd *cmd)
+         return FALSE;
+
+     count = vshCommandOptInt(cmd, "count", &count);
+-    if (count <= 0) {
+-        vshError(ctl, "%s", _("Invalid number of virtual CPUs."));
+-        virDomainFree(dom);
+-        return FALSE;
+-    }
+-
+-    maxcpu = virDomainGetMaxVcpus(dom);
+-    if (maxcpu <= 0) {
+-        virDomainFree(dom);
+-        return FALSE;
+-    }
+-
+-    if (count > maxcpu) {
+-        vshError(ctl, "%s", _("Too many virtual CPUs."));
+-        virDomainFree(dom);
+-        return FALSE;
+-    }
+
+-    if (virDomainSetVcpus(dom, count) != 0) {
+-        ret = FALSE;
+    if (!flags) {
+        if (virDomainSetVcpus(dom, count) != 0) {
+            ret = FALSE;
+        }
+    } else {
+        if (virDomainSetVcpusFlags(dom, count, flags) < 0) {
+            ret = FALSE;
+        }
+     }
+
+     virDomainFree(dom);
+@@ -9642,6 +9845,7 @@ static const vshCmdDef commands[] = {
+     {"freecell", cmdFreecell, opts_freecell, info_freecell},
+     {"hostname", cmdHostname, NULL, info_hostname},
+     {"list", cmdList, opts_list, info_list},
+    {"maxvcpus", cmdMaxvcpus, opts_maxvcpus, info_maxvcpus},
+     {"migrate", cmdMigrate, opts_migrate, info_migrate},
+     {"migrate-setmaxdowntime", cmdMigrateSetMaxDowntime, opts_migrate_setmaxdowntime, info_migrate_setmaxdowntime},
+
+@@ -9748,6 +9952,7 @@ static const vshCmdDef commands[] = {
+     {"vol-name", cmdVolName, opts_vol_name, info_vol_name},
+     {"vol-key", cmdVolKey, opts_vol_key, info_vol_key},
+
+    {"vcpucount", cmdVcpucount, opts_vcpucount, info_vcpucount},
+     {"vcpuinfo", cmdVcpuinfo, opts_vcpuinfo, info_vcpuinfo},
+     {"vcpupin", cmdVcpupin, opts_vcpupin, info_vcpupin},
+     {"version", cmdVersion, NULL, info_version},
+diff --git a/tools/virsh.pod b/tools/virsh.pod
+index 943a563..dbcc680 100644
+--- a/tools/virsh.pod
+++ b/tools/virsh.pod
+@@ -443,7 +443,14 @@ Remove the managed save file for a domain if it exists.  The next time the
+ domain is started it will not restore to its previous state but instead will
+ do a full boot.
+
+-=item B<migrate> optional I<--live> I<--suspend> I<domain-id> I<desturi> I<migrateuri>
+=item B<maxvcpus> optional I<type>
+
+Provide the maximum number of virtual CPUs supported for a guest VM on
+this connection.  If provided, the I<type> parameter must be a valid
+type attribute for the <domain> element of XML.
+
+=item B<migrate> optional I<--live> I<--suspend> I<domain-id> I<desturi>
+I<migrateuri>
+
+ Migrate domain to another host.  Add --live for live migration; --suspend
+ leaves the domain paused on the destination host. The I<desturi> is the
+@@ -521,7 +528,8 @@ Displays the domain memory parameters.
+
+ Allows you to set the domain memory parameters. LXC and QEMU/KVM supports these parameters.
+
+-=item B<setvcpus> I<domain-id> I<count>
+=item B<setvcpus> I<domain-id> I<count> optional I<--maximum> I<--config>
+I<--live>
+
+ Change the number of virtual CPUs active in the guest domain. Note that
+ I<count> may be limited by host, hypervisor or limit coming from the
+@@ -530,6 +538,17 @@ original description of domain.
+ For Xen, you can only adjust the virtual CPUs of a running domain if
+ the domain is paravirtualized.
+
+If I<--config> is specified, the change will only affect the next
+boot of a domain.  If I<--live> is specified, the domain must be
+running, and the change takes place immediately.  Both flags may be
+specified, if supported by the hypervisor.  If neither flag is given,
+then I<--live> is implied and it is up to the hypervisor whether
+I<--config> is also implied.
+
+If I<--maximum> is specified, then you must use I<--config> and
+avoid I<--live>; this flag controls the maximum limit of vcpus that
+can be hot-plugged the next time the domain is booted.
+
+ =item B<shutdown> I<domain-id>
+
+ Gracefully shuts down a domain.  This coordinates with the domain OS
+@@ -568,6 +587,21 @@ is not available the processes will provide an exit code of 1.
+ Undefine the configuration for an inactive domain. Since it's not running
+ the domain name or UUID must be used as the I<domain-id>.
+
+=item B<vcpucount> I<domain-id>  optional I<--maximum> I<--current>
+I<--config> I<--live>
+
+Print information about the virtual cpu counts of the given
+I<domain-id>.  If no flags are specified, all possible counts are
+listed in a table; otherwise, the output is limited to just the
+numeric value requested.
+
+I<--maximum> requests information on the maximum cap of vcpus that a
+domain can add via B<setvcpus>, while I<--current> shows the current
+usage; these two flags cannot both be specified.  I<--config>
+requests information regarding the next time the domain will be
+booted, while I<--live> requires a running domain and lists current
+values; these two flags cannot both be specified.
+
+ =item B<vcpuinfo> I<domain-id>
+
+ Returns basic information about the domain virtual CPUs, like the number of
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0008-support-new-xml.patch
+++ b/docs/api_extension/0008-support-new-xml.patch
@@ -0,0 +1,519 @@
+From 4617eedfaeee2b187a1f14691d25746ba3ff31b6 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Wed, 29 Sep 2010 10:20:07 -0600
+Subject: [PATCH 07/15] vcpu: support maxvcpu in domain_conf
+
+Although this patch adds a distinction between maximum vcpus and
+current vcpus in the XML, the values should be identical for all
+drivers at this point.  Only in subsequent per-driver patches will
+a distinction be made.
+
+In general, virDomainGetInfo should prefer the current vcpus.
+
+* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
+short, to match virDomainGetInfo limit.  Add maxvcpus member.
+* src/conf/domain_conf.c (virDomainDefParseXML)
+(virDomainDefFormat): parse and print out vcpu details.
+* src/xen/xend_internal.c (xenDaemonParseSxpr)
+(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
+to be equal for now.
+* src/xen/xm_internal.c (xenXMDomainConfigParse)
+(xenXMDomainConfigFormat): Likewise.
+* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
+* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
+* src/openvz/openvz_driver.c (openvzDomainDefineXML)
+(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
+* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
+Likewise.
+* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
+* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
+* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
+Likewise.
+* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
+(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
+* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
+* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.
+---
+ src/conf/domain_conf.c     |   45 +++++++++++++++++++++++++++++++++++++------
+ src/conf/domain_conf.h     |    3 +-
+ src/esx/esx_vmx.c          |   24 ++++++++++++++--------
+ src/opennebula/one_conf.c  |    9 +++++--
+ src/openvz/openvz_conf.c   |    7 +++--
+ src/openvz/openvz_driver.c |   15 +++++++++----
+ src/phyp/phyp_driver.c     |    2 +-
+ src/qemu/qemu_conf.c       |   14 +++++++++++-
+ src/qemu/qemu_driver.c     |    5 ++-
+ src/vbox/vbox_tmpl.c       |   12 +++++++---
+ src/xen/xend_internal.c    |    9 ++++---
+ src/xen/xm_internal.c      |   11 ++++++---
+ src/xenapi/xenapi_driver.c |    2 +-
+ src/xenapi/xenapi_utils.c  |    4 +-
+ 14 files changed, 114 insertions(+), 48 deletions(-)
+
+diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
+index 78d7a6a..a997e06 100644
+--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
+@@ -4203,6 +4203,7 @@ static virDomainDefPtr virDomainDefParseXML(virCapsPtr caps,
+     int i, n;
+     long id = -1;
+     virDomainDefPtr def;
+    unsigned long count;
+
+     if (VIR_ALLOC(def) < 0) {
+         virReportOOMError();
+@@ -4287,8 +4288,37 @@ static virDomainDefPtr virDomainDefParseXML(virCapsPtr caps,
+                       &def->mem.swap_hard_limit) < 0)
+         def->mem.swap_hard_limit = 0;
+
+-    if (virXPathULong("string(./vcpu[1])", ctxt, &def->vcpus) < 0)
+-        def->vcpus = 1;
+    n = virXPathULong("string(./vcpu[1])", ctxt, &count);
+    if (n == -2) {
+        virDomainReportError(VIR_ERR_XML_ERROR, "%s",
+                             _("maximum vcpus must be an integer"));
+        goto error;
+    } else if (n < 0) {
+        def->maxvcpus = 1;
+    } else {
+        def->maxvcpus = count;
+        if (def->maxvcpus != count || count == 0) {
+            virDomainReportError(VIR_ERR_XML_ERROR,
+                                 _("invalid maxvcpus %lu"), count);
+            goto error;
+        }
+    }
+
+    n = virXPathULong("string(./vcpu[1]/@current)", ctxt, &count);
+    if (n == -2) {
+        virDomainReportError(VIR_ERR_XML_ERROR, "%s",
+                             _("current vcpus must be an integer"));
+        goto error;
+    } else if (n < 0) {
+        def->vcpus = def->maxvcpus;
+    } else {
+        def->vcpus = count;
+        if (def->vcpus != count || count == 0 || def->maxvcpus < count) {
+            virDomainReportError(VIR_ERR_XML_ERROR,
+                                 _("invalid current vcpus %lu"), count);
+            goto error;
+        }
+    }
+
+     tmp = virXPathString("string(./vcpu[1]/@cpuset)", ctxt);
+     if (tmp) {
+@@ -6462,17 +6492,18 @@ char *virDomainDefFormat(virDomainDefPtr def,
+         if (def->cpumask[n] != 1)
+             allones = 0;
+
+-    if (allones) {
+-        virBufferAsprintf(&buf, "  <vcpu>%lu</vcpu>\n", def->vcpus);
+-    } else {
+    virBufferAddLit(&buf, "  <vcpu");
+    if (!allones) {
+         char *cpumask = NULL;
+         if ((cpumask =
+              virDomainCpuSetFormat(def->cpumask, def->cpumasklen)) == NULL)
+             goto cleanup;
+-        virBufferAsprintf(&buf, "  <vcpu cpuset='%s'>%lu</vcpu>\n",
+-                          cpumask, def->vcpus);
+        virBufferAsprintf(&buf, " cpuset='%s'", cpumask);
+         VIR_FREE(cpumask);
+     }
+    if (def->vcpus != def->maxvcpus)
+        virBufferAsprintf(&buf, " current='%u'", def->vcpus);
+    virBufferAsprintf(&buf, ">%u</vcpu>\n", def->maxvcpus);
+
+     if (def->os.bootloader) {
+         virBufferEscapeString(&buf, "  <bootloader>%s</bootloader>\n",
+diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
+index db09c23..5499f28 100644
+--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
+@@ -885,7 +885,8 @@ struct _virDomainDef {
+         unsigned long min_guarantee;
+         unsigned long swap_hard_limit;
+     } mem;
+-    unsigned long vcpus;
+    unsigned short vcpus;
+    unsigned short maxvcpus;
+     int cpumasklen;
+     char *cpumask;
+
+diff --git a/src/esx/esx_vmx.c b/src/esx/esx_vmx.c
+index 7ec8c0e..0a26614 100644
+--- a/src/esx/esx_vmx.c
+++ b/src/esx/esx_vmx.c
+@@ -50,7 +50,7 @@ def->uuid = <value>               <=>   uuid.bios = "<value>"
+ def->name = <value>               <=>   displayName = "<value>"
+ def->mem.max_balloon = <value kilobyte>    <=>   memsize = "<value megabyte>"            # must be a multiple of 4, defaults to 32
+ def->mem.cur_balloon = <value kilobyte>    <=>   sched.mem.max = "<value megabyte>"      # defaults to "unlimited" -> def->mem.cur_balloon = def->mem.max_balloon
+-def->vcpus = <value>              <=>   numvcpus = "<value>"                    # must be 1 or a multiple of 2, defaults to 1
+def->maxvcpus = <value>           <=>   numvcpus = "<value>"                    # must be 1 or a multiple of 2, defaults to 1
+ def->cpumask = <uint list>        <=>   sched.cpu.affinity = "<uint list>"
+
+
+@@ -1075,7 +1075,7 @@ esxVMX_ParseConfig(esxVMX_Context *ctx, virCapsPtr caps, const char *vmx,
+         goto cleanup;
+     }
+
+-    def->vcpus = numvcpus;
+    def->maxvcpus = def->vcpus = numvcpus;
+
+     /* vmx:sched.cpu.affinity -> def:cpumask */
+     // VirtualMachine:config.cpuAffinity.affinitySet
+@@ -2609,16 +2609,22 @@ esxVMX_FormatConfig(esxVMX_Context *ctx, virCapsPtr caps, virDomainDefPtr def,
+                           (int)(def->mem.cur_balloon / 1024));
+     }
+
+-    /* def:vcpus -> vmx:numvcpus */
+-    if (def->vcpus <= 0 || (def->vcpus % 2 != 0 && def->vcpus != 1)) {
+    /* def:maxvcpus -> vmx:numvcpus */
+    if (def->vcpus != def->maxvcpus) {
+        ESX_ERROR(VIR_ERR_CONFIG_UNSUPPORTED,
+                  _("No support for domain XML entry 'vcpu' attribute "
+                    "'current'"));
+        goto cleanup;
+    }
+    if (def->maxvcpus <= 0 || (def->maxvcpus % 2 != 0 && def->maxvcpus != 1)) {
+         ESX_ERROR(VIR_ERR_INTERNAL_ERROR,
+                   _("Expecting domain XML entry 'vcpu' to be an unsigned "
+                     "integer (1 or a multiple of 2) but found %d"),
+-                  (int)def->vcpus);
+                  def->maxvcpus);
+         goto cleanup;
+     }
+
+-    virBufferAsprintf(&buffer, "numvcpus = \"%d\"\n", (int)def->vcpus);
+    virBufferAsprintf(&buffer, "numvcpus = \"%d\"\n", def->maxvcpus);
+
+     /* def:cpumask -> vmx:sched.cpu.affinity */
+     if (def->cpumasklen > 0) {
+@@ -2632,11 +2638,11 @@ esxVMX_FormatConfig(esxVMX_Context *ctx, virCapsPtr caps, virDomainDefPtr def,
+             }
+         }
+
+-        if (sched_cpu_affinity_length < def->vcpus) {
+        if (sched_cpu_affinity_length < def->maxvcpus) {
+             ESX_ERROR(VIR_ERR_INTERNAL_ERROR,
+                       _("Expecting domain XML attribute 'cpuset' of entry "
+-                        "'vcpu' to contains at least %d CPU(s)"),
+-                      (int)def->vcpus);
+                        "'vcpu' to contain at least %d CPU(s)"),
+                      def->maxvcpus);
+             goto cleanup;
+         }
+
+diff --git a/src/opennebula/one_conf.c b/src/opennebula/one_conf.c
+index 44e28dc..2079c51 100644
+--- a/src/opennebula/one_conf.c
+++ b/src/opennebula/one_conf.c
+@@ -1,5 +1,7 @@
+ /*----------------------------------------------------------------------------------*/
+-/* Copyright 2002-2009, Distributed Systems Architecture Group, Universidad
+/*
+ * Copyright (C) 2010 Red Hat, Inc.
+ * Copyright 2002-2009, Distributed Systems Architecture Group, Universidad
+  * Complutense de Madrid (dsa-research.org)
+  *
+  * This library is free software; you can redistribute it and/or
+@@ -169,9 +171,10 @@ char* xmlOneTemplate(virDomainDefPtr def)
+ {
+     int i;
+     virBuffer buf= VIR_BUFFER_INITIALIZER;
+-    virBufferAsprintf(&buf,"#OpenNebula Template automatically generated by libvirt\nNAME = %s\nCPU = %ld\nMEMORY = %ld\n",
+    virBufferAsprintf(&buf,"#OpenNebula Template automatically generated "
+                      "by libvirt\nNAME = %s\nCPU = %d\nMEMORY = %ld\n",
+                       def->name,
+-                      def->vcpus,
+                      def->maxvcpus,
+                       (def->mem.max_balloon)/1024);
+
+     /*Optional Booting OpenNebula Information:*/
+diff --git a/src/openvz/openvz_conf.c b/src/openvz/openvz_conf.c
+index ec11bbc..c84a6f3 100644
+--- a/src/openvz/openvz_conf.c
+++ b/src/openvz/openvz_conf.c
+@@ -507,11 +507,12 @@ int openvzLoadDomains(struct openvz_driver *driver) {
+                         veid);
+             goto cleanup;
+         } else if (ret > 0) {
+-            dom->def->vcpus = strtoI(temp);
+            dom->def->maxvcpus = strtoI(temp);
+         }
+
+-        if (ret == 0 || dom->def->vcpus == 0)
+-            dom->def->vcpus = openvzGetNodeCPUs();
+        if (ret == 0 || dom->def->maxvcpus == 0)
+            dom->def->maxvcpus = openvzGetNodeCPUs();
+        dom->def->vcpus = dom->def->maxvcpus;
+
+         /* XXX load rest of VM config data .... */
+
+diff --git a/src/openvz/openvz_driver.c b/src/openvz/openvz_driver.c
+index 0f3cfdf..b7c2754 100644
+--- a/src/openvz/openvz_driver.c
+++ b/src/openvz/openvz_driver.c
+@@ -925,8 +925,13 @@ openvzDomainDefineXML(virConnectPtr conn, const char *xml)
+     if (openvzDomainSetNetworkConfig(conn, vm->def) < 0)
+         goto cleanup;
+
+-    if (vm->def->vcpus > 0) {
+-        if (openvzDomainSetVcpusInternal(vm, vm->def->vcpus) < 0) {
+    if (vm->def->vcpus != vm->def->maxvcpus) {
+        openvzError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                    _("current vcpu count must equal maximum"));
+        goto cleanup;
+    }
+    if (vm->def->maxvcpus > 0) {
+        if (openvzDomainSetVcpusInternal(vm, vm->def->maxvcpus) < 0) {
+             openvzError(VIR_ERR_INTERNAL_ERROR, "%s",
+                         _("Could not set number of virtual cpu"));
+              goto cleanup;
+@@ -1019,8 +1024,8 @@ openvzDomainCreateXML(virConnectPtr conn, const char *xml,
+     vm->def->id = vm->pid;
+     vm->state = VIR_DOMAIN_RUNNING;
+
+-    if (vm->def->vcpus > 0) {
+-        if (openvzDomainSetVcpusInternal(vm, vm->def->vcpus) < 0) {
+    if (vm->def->maxvcpus > 0) {
+        if (openvzDomainSetVcpusInternal(vm, vm->def->maxvcpus) < 0) {
+             openvzError(VIR_ERR_INTERNAL_ERROR, "%s",
+                         _("Could not set number of virtual cpu"));
+             goto cleanup;
+@@ -1249,7 +1254,7 @@ static int openvzDomainSetVcpusInternal(virDomainObjPtr vm,
+         return -1;
+     }
+
+-    vm->def->vcpus = nvcpus;
+    vm->def->maxvcpus = vm->def->vcpus = nvcpus;
+     return 0;
+ }
+
+diff --git a/src/phyp/phyp_driver.c b/src/phyp/phyp_driver.c
+index e284ae0..3d0ed11 100644
+--- a/src/phyp/phyp_driver.c
+++ b/src/phyp/phyp_driver.c
+@@ -3540,7 +3540,7 @@ phypDomainDumpXML(virDomainPtr dom, int flags)
+         goto err;
+     }
+
+-    if ((def.vcpus =
+    if ((def.maxvcpus = def.vcpus =
+          phypGetLparCPU(dom->conn, managed_system, dom->id)) == 0) {
+         VIR_ERROR0(_("Unable to determine domain's CPU."));
+         goto err;
+diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
+index 83c0f83..38c8351 100644
+--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
+@@ -3711,7 +3711,7 @@ qemuBuildSmpArgStr(const virDomainDefPtr def,
+ {
+     virBuffer buf = VIR_BUFFER_INITIALIZER;
+
+-    virBufferAsprintf(&buf, "%lu", def->vcpus);
+    virBufferAsprintf(&buf, "%u", def->vcpus);
+
+     if ((qemuCmdFlags & QEMUD_CMD_FLAG_SMP_TOPOLOGY)) {
+         /* sockets, cores, and threads are either all zero
+@@ -3722,11 +3722,18 @@ qemuBuildSmpArgStr(const virDomainDefPtr def,
+             virBufferAsprintf(&buf, ",threads=%u", def->cpu->threads);
+         }
+         else {
+-            virBufferAsprintf(&buf, ",sockets=%lu", def->vcpus);
+            virBufferAsprintf(&buf, ",sockets=%u", def->maxvcpus);
+             virBufferAsprintf(&buf, ",cores=%u", 1);
+             virBufferAsprintf(&buf, ",threads=%u", 1);
+         }
+     }
+    if (def->vcpus != def->maxvcpus) {
+        virBufferFreeAndReset(&buf);
+        qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                        _("setting current vcpu count less than maximum is "
+                          "not supported yet"));
+        return NULL;
+    }
+
+     if (virBufferError(&buf)) {
+         virBufferFreeAndReset(&buf);
+@@ -6178,6 +6185,8 @@ qemuParseCommandLineSmp(virDomainDefPtr dom,
+         }
+     }
+
+    dom->maxvcpus = dom->vcpus;
+
+     if (sockets && cores && threads) {
+         virCPUDefPtr cpu;
+
+@@ -6247,6 +6256,7 @@ virDomainDefPtr qemuParseCommandLine(virCapsPtr caps,
+
+     def->id = -1;
+     def->mem.cur_balloon = def->mem.max_balloon = 64 * 1024;
+    def->maxvcpus = 1;
+     def->vcpus = 1;
+     def->clock.offset = VIR_DOMAIN_CLOCK_OFFSET_UTC;
+     def->features = (1 << VIR_DOMAIN_FEATURE_ACPI)
+diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
+index 7a2ea8f..c66dc04 100644
+--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
+@@ -2425,8 +2425,9 @@ qemuDetectVcpuPIDs(struct qemud_driver *driver,
+
+     if (ncpupids != vm->def->vcpus) {
+         qemuReportError(VIR_ERR_INTERNAL_ERROR,
+-                        _("got wrong number of vCPU pids from QEMU monitor. got %d, wanted %d"),
+-                        ncpupids, (int)vm->def->vcpus);
+                        _("got wrong number of vCPU pids from QEMU monitor. "
+                          "got %d, wanted %d"),
+                        ncpupids, vm->def->vcpus);
+         VIR_FREE(cpupids);
+         return -1;
+     }
+diff --git a/src/vbox/vbox_tmpl.c b/src/vbox/vbox_tmpl.c
+index 0cbe8b3..5a859a4 100644
+--- a/src/vbox/vbox_tmpl.c
+++ b/src/vbox/vbox_tmpl.c
+@@ -2028,7 +2028,7 @@ static char *vboxDomainDumpXML(virDomainPtr dom, int flags) {
+             def->mem.max_balloon = memorySize * 1024;
+
+             machine->vtbl->GetCPUCount(machine, &CPUCount);
+-            def->vcpus = CPUCount;
+            def->maxvcpus = def->vcpus = CPUCount;
+
+             /* Skip cpumasklen, cpumask, onReboot, onPoweroff, onCrash */
+
+@@ -4598,11 +4598,15 @@ static virDomainPtr vboxDomainDefineXML(virConnectPtr conn, const char *xml) {
+                   def->mem.cur_balloon, (unsigned)rc);
+     }
+
+-    rc = machine->vtbl->SetCPUCount(machine, def->vcpus);
+    if (def->vcpus != def->maxvcpus) {
+        vboxError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                    _("current vcpu count must equal maximum"));
+    }
+    rc = machine->vtbl->SetCPUCount(machine, def->maxvcpus);
+     if (NS_FAILED(rc)) {
+         vboxError(VIR_ERR_INTERNAL_ERROR,
+-                  _("could not set the number of virtual CPUs to: %lu, rc=%08x"),
+-                  def->vcpus, (unsigned)rc);
+                  _("could not set the number of virtual CPUs to: %u, rc=%08x"),
+                  def->maxvcpus, (unsigned)rc);
+     }
+
+ #if VBOX_API_VERSION < 3001
+diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
+index 5ffc3c8..456b477 100644
+--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
+@@ -2190,7 +2190,8 @@ xenDaemonParseSxpr(virConnectPtr conn,
+         }
+     }
+
+-    def->vcpus = sexpr_int(root, "domain/vcpus");
+    def->maxvcpus = sexpr_int(root, "domain/vcpus");
+    def->vcpus = def->maxvcpus;
+
+     tmp = sexpr_node(root, "domain/on_poweroff");
+     if (tmp != NULL) {
+@@ -5649,7 +5650,7 @@ xenDaemonFormatSxprInput(virDomainInputDefPtr input,
+  *
+  * Generate an SEXPR representing the domain configuration.
+  *
+- * Returns the 0 terminatedi S-Expr string or NULL in case of error.
+ * Returns the 0 terminated S-Expr string or NULL in case of error.
+  *         the caller must free() the returned value.
+  */
+ char *
+@@ -5666,7 +5667,7 @@ xenDaemonFormatSxpr(virConnectPtr conn,
+     virBufferAsprintf(&buf, "(name '%s')", def->name);
+     virBufferAsprintf(&buf, "(memory %lu)(maxmem %lu)",
+                       def->mem.cur_balloon/1024, def->mem.max_balloon/1024);
+-    virBufferAsprintf(&buf, "(vcpus %lu)", def->vcpus);
+    virBufferAsprintf(&buf, "(vcpus %u)", def->maxvcpus);
+
+     if (def->cpumask) {
+         char *ranges = virDomainCpuSetFormat(def->cpumask, def->cpumasklen);
+@@ -5761,7 +5762,7 @@ xenDaemonFormatSxpr(virConnectPtr conn,
+             else
+                 virBufferAsprintf(&buf, "(kernel '%s')", def->os.loader);
+
+-            virBufferAsprintf(&buf, "(vcpus %lu)", def->vcpus);
+            virBufferAsprintf(&buf, "(vcpus %u)", def->maxvcpus);
+
+             for (i = 0 ; i < def->os.nBootDevs ; i++) {
+                 switch (def->os.bootDevs[i]) {
+diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c
+index 8e42a1c..bf20a64 100644
+--- a/src/xen/xm_internal.c
+++ b/src/xen/xm_internal.c
+@@ -678,6 +678,7 @@ xenXMDomainConfigParse(virConnectPtr conn, virConfPtr conf) {
+     int i;
+     const char *defaultArch, *defaultMachine;
+     int vmlocaltime = 0;
+    unsigned long count;
+
+     if (VIR_ALLOC(def) < 0) {
+         virReportOOMError();
+@@ -770,9 +771,11 @@ xenXMDomainConfigParse(virConnectPtr conn, virConfPtr conf) {
+     def->mem.cur_balloon *= 1024;
+     def->mem.max_balloon *= 1024;
+
+-
+-    if (xenXMConfigGetULong(conf, "vcpus", &def->vcpus, 1) < 0)
+    if (xenXMConfigGetULong(conf, "vcpus", &count, 1) < 0 ||
+        (unsigned short) count != count)
+         goto cleanup;
+    def->maxvcpus = count;
+    def->vcpus = def->maxvcpus;
+
+     if (xenXMConfigGetString(conf, "cpus", &str, NULL) < 0)
+         goto cleanup;
+@@ -1650,7 +1653,7 @@ int xenXMDomainSetVcpus(virDomainPtr domain, unsigned int vcpus) {
+     if (!(entry = virHashLookup(priv->configCache, filename)))
+         goto cleanup;
+
+-    entry->def->vcpus = vcpus;
+    entry->def->maxvcpus = entry->def->vcpus = vcpus;
+
+     /* If this fails, should we try to undo our changes to the
+      * in-memory representation of the config file. I say not!
+@@ -2241,7 +2244,7 @@ virConfPtr xenXMDomainConfigFormat(virConnectPtr conn,
+     if (xenXMConfigSetInt(conf, "memory", def->mem.cur_balloon / 1024) < 0)
+         goto no_memory;
+
+-    if (xenXMConfigSetInt(conf, "vcpus", def->vcpus) < 0)
+    if (xenXMConfigSetInt(conf, "vcpus", def->maxvcpus) < 0)
+         goto no_memory;
+
+     if ((def->cpumask != NULL) &&
+diff --git a/src/xenapi/xenapi_driver.c b/src/xenapi/xenapi_driver.c
+index 7d4ab8d..5ccdede 100644
+--- a/src/xenapi/xenapi_driver.c
+++ b/src/xenapi/xenapi_driver.c
+@@ -1335,7 +1335,7 @@ xenapiDomainDumpXML (virDomainPtr dom, int flags ATTRIBUTE_UNUSED)
+     } else {
+         defPtr->mem.cur_balloon = memory;
+     }
+-    defPtr->vcpus = xenapiDomainGetMaxVcpus(dom);
+    defPtr->maxvcpus = defPtr->vcpus = xenapiDomainGetMaxVcpus(dom);
+     enum xen_on_normal_exit action;
+     if (xen_vm_get_actions_after_shutdown(session, &action, vm)) {
+         defPtr->onPoweroff = xenapiNormalExitEnum2virDomainLifecycle(action);
+diff --git a/src/xenapi/xenapi_utils.c b/src/xenapi/xenapi_utils.c
+index be55491..a7e2a4b 100644
+--- a/src/xenapi/xenapi_utils.c
+++ b/src/xenapi/xenapi_utils.c
+@@ -510,8 +510,8 @@ createVMRecordFromXml (virConnectPtr conn, virDomainDefPtr def,
+     else
+         (*record)->memory_dynamic_max = (*record)->memory_static_max;
+
+-    if (def->vcpus) {
+-        (*record)->vcpus_max = (int64_t) def->vcpus;
+    if (def->maxvcpus) {
+        (*record)->vcpus_max = (int64_t) def->maxvcpus;
+         (*record)->vcpus_at_startup = (int64_t) def->vcpus;
+     }
+     if (def->onPoweroff)
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0009-support-all-flags-in-test-driver.patch
+++ b/docs/api_extension/0009-support-all-flags-in-test-driver.patch
@@ -0,0 +1,197 @@
+From 6c9e6b956453d0f0c4ff542ef8a184d663a39266 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Mon, 4 Oct 2010 17:01:12 -0600
+Subject: [PATCH 09/15] vcpu: support all flags in test driver
+
+* src/test/test_driver.c (testDomainGetVcpusFlags)
+(testDomainSetVcpusFlags): Support all flags.
+(testDomainUpdateVCPUs): Update cpu count here.
+---
+ src/test/test_driver.c |  128 ++++++++++++++++++++++++++++++++++++++++-------
+ 1 files changed, 109 insertions(+), 19 deletions(-)
+
+diff --git a/src/test/test_driver.c b/src/test/test_driver.c
+index b70c80d..a9d3d89 100644
+--- a/src/test/test_driver.c
+++ b/src/test/test_driver.c
+@@ -450,6 +450,7 @@ testDomainUpdateVCPUs(virConnectPtr conn,
+                 goto cleanup;
+     }
+
+    dom->def->vcpus = nvcpus;
+     ret = 0;
+ cleanup:
+     return ret;
+@@ -2032,12 +2033,51 @@ cleanup:
+ static int
+ testDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags)
+ {
+-    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+-        testError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+    testConnPtr privconn = domain->conn->privateData;
+    virDomainObjPtr vm;
+    virDomainDefPtr def;
+    int ret = -1;
+
+    virCheckFlags(VIR_DOMAIN_VCPU_LIVE |
+                  VIR_DOMAIN_VCPU_CONFIG |
+                  VIR_DOMAIN_VCPU_MAXIMUM, -1);
+
+    /* Exactly one of LIVE or CONFIG must be set.  */
+    if (!(flags & VIR_DOMAIN_VCPU_LIVE) == !(flags & VIR_DOMAIN_VCPU_CONFIG)) {
+        testError(VIR_ERR_INVALID_ARG,
+                  _("invalid flag combination: (0x%x)"), flags);
+         return -1;
+     }
+
+-    return testGetMaxVCPUs(domain->conn, "test");
+    testDriverLock(privconn);
+    vm = virDomainFindByUUID(&privconn->domains, domain->uuid);
+    testDriverUnlock(privconn);
+
+    if (!vm) {
+        char uuidstr[VIR_UUID_STRING_BUFLEN];
+        virUUIDFormat(domain->uuid, uuidstr);
+        testError(VIR_ERR_NO_DOMAIN,
+                  _("no domain with matching uuid '%s'"), uuidstr);
+        goto cleanup;
+    }
+
+    if (flags & VIR_DOMAIN_VCPU_LIVE) {
+        if (!virDomainObjIsActive(vm)) {
+            testError(VIR_ERR_OPERATION_INVALID, "%s",
+                      _("domain not active"));
+            goto cleanup;
+        }
+        def = vm->def;
+    } else {
+        def = vm->newDef ? vm->newDef : vm->def;
+    }
+
+    ret = (flags & VIR_DOMAIN_VCPU_MAXIMUM) ? def->maxvcpus : def->vcpus;
+
+cleanup:
+    if (vm)
+        virDomainObjUnlock(vm);
+    return ret;
+ }
+
+ static int
+@@ -2053,21 +2093,30 @@ testDomainSetVcpusFlags(virDomainPtr domain, unsigned int nrCpus,
+ {
+     testConnPtr privconn = domain->conn->privateData;
+     virDomainObjPtr privdom = NULL;
+    virDomainDefPtr def;
+     int ret = -1, maxvcpus;
+
+-    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+-        testError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"), flags);
+    virCheckFlags(VIR_DOMAIN_VCPU_LIVE |
+                  VIR_DOMAIN_VCPU_CONFIG |
+                  VIR_DOMAIN_VCPU_MAXIMUM, -1);
+
+    /* At least one of LIVE or CONFIG must be set.  MAXIMUM cannot be
+     * mixed with LIVE.  */
+    if ((flags & (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG)) == 0 ||
+        (flags & (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) ==
+         (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) {
+        testError(VIR_ERR_INVALID_ARG,
+                  _("invalid flag combination: (0x%x)"), flags);
+        return -1;
+    }
+    if (!nrCpus || (maxvcpus = testGetMaxVCPUs(domain->conn, NULL)) < nrCpus) {
+        testError(VIR_ERR_INVALID_ARG,
+                  _("argument out of range: %d"), nrCpus);
+         return -1;
+     }
+-
+-    /* Do this first before locking */
+-    maxvcpus = testDomainGetMaxVcpus(domain);
+-    if (maxvcpus < 0)
+-        goto cleanup;
+
+     testDriverLock(privconn);
+-    privdom = virDomainFindByName(&privconn->domains,
+-                                  domain->name);
+    privdom = virDomainFindByUUID(&privconn->domains, domain->uuid);
+     testDriverUnlock(privconn);
+
+     if (privdom == NULL) {
+@@ -2075,13 +2124,17 @@ testDomainSetVcpusFlags(virDomainPtr domain, unsigned int nrCpus,
+         goto cleanup;
+     }
+
+-    if (!virDomainObjIsActive(privdom)) {
+    if (!virDomainObjIsActive(privdom) && (flags & VIR_DOMAIN_VCPU_LIVE)) {
+         testError(VIR_ERR_OPERATION_INVALID,
+                   "%s", _("cannot hotplug vcpus for an inactive domain"));
+         goto cleanup;
+     }
+
+-    /* We allow more cpus in guest than host */
+    /* We allow more cpus in guest than host, but not more than the
+     * domain's starting limit.  */
+    if ((flags & (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) ==
+        VIR_DOMAIN_VCPU_LIVE && privdom->def->maxvcpus < maxvcpus)
+        maxvcpus = privdom->def->maxvcpus;
+     if (nrCpus > maxvcpus) {
+         testError(VIR_ERR_INVALID_ARG,
+                   "requested cpu amount exceeds maximum (%d > %d)",
+@@ -2089,12 +2142,49 @@ testDomainSetVcpusFlags(virDomainPtr domain, unsigned int nrCpus,
+         goto cleanup;
+     }
+
+-    /* Update VCPU state for the running domain */
+-    if (testDomainUpdateVCPUs(domain->conn, privdom, nrCpus, 0) < 0)
+-        goto cleanup;
+    switch (flags) {
+    case VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_CONFIG:
+        def = privdom->def;
+        if (virDomainObjIsActive(privdom)) {
+            if (privdom->newDef)
+                def = privdom->newDef;
+            else {
+                testError(VIR_ERR_OPERATION_INVALID, "%s",
+                          _("no persistent state"));
+                goto cleanup;
+            }
+        }
+        def->maxvcpus = nrCpus;
+        if (nrCpus < def->vcpus)
+            def->vcpus = nrCpus;
+        ret = 0;
+        break;
+
+-    privdom->def->vcpus = nrCpus;
+-    ret = 0;
+    case VIR_DOMAIN_VCPU_CONFIG:
+        def = privdom->def;
+        if (virDomainObjIsActive(privdom)) {
+            if (privdom->newDef)
+                def = privdom->newDef;
+            else {
+                testError(VIR_ERR_OPERATION_INVALID, "%s",
+                          _("no persistent state"));
+                goto cleanup;
+            }
+        }
+        def->vcpus = nrCpus;
+        ret = 0;
+        break;
+
+    case VIR_DOMAIN_VCPU_LIVE:
+        ret = testDomainUpdateVCPUs(domain->conn, privdom, nrCpus, 0);
+        break;
+
+    case VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG:
+        ret = testDomainUpdateVCPUs(domain->conn, privdom, nrCpus, 0);
+        if (ret == 0 && privdom->newDef)
+            privdom->newDef->vcpus = nrCpus;
+        break;
+    }
+
+ cleanup:
+     if (privdom)
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0010-improve-vcpu-support-in-qemu-command-line.patch
+++ b/docs/api_extension/0010-improve-vcpu-support-in-qemu-command-line.patch
@@ -0,0 +1,122 @@
+From d67c189e80e6aef7adf13e5763365555cfc1a02a Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Wed, 29 Sep 2010 15:58:47 -0600
+Subject: [PATCH 10/15] vcpu: improve vcpu support in qemu command line
+
+* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
+between vcpus and maxvcpus, for new enough qemu.
+* tests/qemuargv2xmltest.c (mymain): Add new test.
+* tests/qemuxml2argvtest.c (mymain): Likewise.
+* tests/qemuxml2xmltest.c (mymain): Likewise.
+* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
+---
+ src/qemu/qemu_conf.c                         |   13 +++++++++----
+ tests/qemuargv2xmltest.c                     |    2 ++
+ tests/qemuxml2argvdata/qemuxml2argv-smp.args |    1 +
+ tests/qemuxml2argvtest.c                     |    2 ++
+ tests/qemuxml2xmltest.c                      |    2 ++
+ 5 files changed, 16 insertions(+), 4 deletions(-)
+ create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-smp.args
+
+diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
+index 38c8351..ffe184b 100644
+--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
+@@ -3714,6 +3714,8 @@ qemuBuildSmpArgStr(const virDomainDefPtr def,
+     virBufferAsprintf(&buf, "%u", def->vcpus);
+
+     if ((qemuCmdFlags & QEMUD_CMD_FLAG_SMP_TOPOLOGY)) {
+        if (def->vcpus != def->maxvcpus)
+            virBufferAsprintf(&buf, ",maxcpus=%u", def->maxvcpus);
+         /* sockets, cores, and threads are either all zero
+          * or all non-zero, thus checking one of them is enough */
+         if (def->cpu && def->cpu->sockets) {
+@@ -3726,12 +3728,12 @@ qemuBuildSmpArgStr(const virDomainDefPtr def,
+             virBufferAsprintf(&buf, ",cores=%u", 1);
+             virBufferAsprintf(&buf, ",threads=%u", 1);
+         }
+-    }
+-    if (def->vcpus != def->maxvcpus) {
+    } else if (def->vcpus != def->maxvcpus) {
+         virBufferFreeAndReset(&buf);
+        /* FIXME - consider hot-unplugging cpus after boot for older qemu */
+         qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                         _("setting current vcpu count less than maximum is "
+-                          "not supported yet"));
+                          "not supported with this QEMU binary"));
+         return NULL;
+     }
+
+@@ -6153,6 +6155,7 @@ qemuParseCommandLineSmp(virDomainDefPtr dom,
+     unsigned int sockets = 0;
+     unsigned int cores = 0;
+     unsigned int threads = 0;
+    unsigned int maxcpus = 0;
+     int i;
+     int nkws;
+     char **kws;
+@@ -6180,12 +6183,14 @@ qemuParseCommandLineSmp(virDomainDefPtr dom,
+                 cores = n;
+             else if (STREQ(kws[i], "threads"))
+                 threads = n;
+            else if (STREQ(kws[i], "maxcpus"))
+                maxcpus = n;
+             else
+                 goto syntax;
+         }
+     }
+
+-    dom->maxvcpus = dom->vcpus;
+    dom->maxvcpus = maxcpus ? maxcpus : dom->vcpus;
+
+     if (sockets && cores && threads) {
+         virCPUDefPtr cpu;
+diff --git a/tests/qemuargv2xmltest.c b/tests/qemuargv2xmltest.c
+index 4f9ec84..d941b0b 100644
+--- a/tests/qemuargv2xmltest.c
+++ b/tests/qemuargv2xmltest.c
+@@ -221,6 +221,8 @@ mymain(int argc, char **argv)
+
+     DO_TEST("hostdev-pci-address");
+
+    DO_TEST("smp");
+
+     DO_TEST_FULL("restore-v1", 0, "stdio");
+     DO_TEST_FULL("restore-v2", 0, "stdio");
+     DO_TEST_FULL("restore-v2", 0, "exec:cat");
+diff --git a/tests/qemuxml2argvdata/qemuxml2argv-smp.args b/tests/qemuxml2argvdata/qemuxml2argv-smp.args
+new file mode 100644
+index 0000000..3ec8f15
+--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-smp.args
+@@ -0,0 +1 @@
+LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1,maxcpus=2,sockets=2,cores=1,threads=1 -nographic -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -hda /dev/HostVG/QEMUGuest1 -net none -serial none -parallel none -usb
+diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
+index 92d5b18..551d6c4 100644
+--- a/tests/qemuxml2argvtest.c
+++ b/tests/qemuxml2argvtest.c
+@@ -385,6 +385,8 @@ mymain(int argc, char **argv)
+
+     DO_TEST("qemu-ns", 0);
+
+    DO_TEST("smp", QEMUD_CMD_FLAG_SMP_TOPOLOGY);
+
+     free(driver.stateDir);
+     virCapabilitiesFree(driver.caps);
+
+diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
+index a33d435..cdc4390 100644
+--- a/tests/qemuxml2xmltest.c
+++ b/tests/qemuxml2xmltest.c
+@@ -180,6 +180,8 @@ mymain(int argc, char **argv)
+     DO_TEST("encrypted-disk");
+     DO_TEST("memtune");
+
+    DO_TEST("smp");
+
+     /* These tests generate different XML */
+     DO_TEST_DIFFERENT("balloon-device-auto");
+     DO_TEST_DIFFERENT("channel-virtio-auto");
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0011-complete-vcpu-support-in-qemu-driver.patch
+++ b/docs/api_extension/0011-complete-vcpu-support-in-qemu-driver.patch
@@ -0,0 +1,169 @@
+From 28a3605906385cba43df77051dc26e865f237b09 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Wed, 29 Sep 2010 17:40:45 -0600
+Subject: [PATCH 11/15] vcpu: complete vcpu support in qemu driver
+
+* src/qemu/qemu_driver.c (qemudDomainSetVcpusFlags)
+(qemudDomainGetVcpusFlags): Support all feasible flag
+combinations.
+---
+ src/qemu/qemu_driver.c |  100 ++++++++++++++++++++++++++++++++++++++++-------
+ 1 files changed, 85 insertions(+), 15 deletions(-)
+
+diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
+index c66dc04..a9e057f 100644
+--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
+@@ -5941,13 +5941,27 @@ qemudDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+ {
+     struct qemud_driver *driver = dom->conn->privateData;
+     virDomainObjPtr vm;
+    virDomainDefPtr def;
+     const char * type;
+     int max;
+     int ret = -1;
+
+-    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+-        qemuReportError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+-                        flags);
+    virCheckFlags(VIR_DOMAIN_VCPU_LIVE |
+                  VIR_DOMAIN_VCPU_CONFIG |
+                  VIR_DOMAIN_VCPU_MAXIMUM, -1);
+
+    /* At least one of LIVE or CONFIG must be set.  MAXIMUM cannot be
+     * mixed with LIVE.  */
+    if ((flags & (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG)) == 0 ||
+        (flags & (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) ==
+         (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) {
+        qemuReportError(VIR_ERR_INVALID_ARG,
+                        _("invalid flag combination: (0x%x)"), flags);
+        return -1;
+    }
+    if (!nvcpus || (unsigned short) nvcpus != nvcpus) {
+        qemuReportError(VIR_ERR_INVALID_ARG,
+                        _("argument out of range: %d"), nvcpus);
+         return -1;
+     }
+
+@@ -5966,7 +5980,7 @@ qemudDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+     if (qemuDomainObjBeginJob(vm) < 0)
+         goto cleanup;
+
+-    if (!virDomainObjIsActive(vm)) {
+    if (!virDomainObjIsActive(vm) && (flags & VIR_DOMAIN_VCPU_LIVE)) {
+         qemuReportError(VIR_ERR_OPERATION_INVALID,
+                          "%s", _("domain is not running"));
+         goto endjob;
+@@ -5985,6 +5999,11 @@ qemudDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+         goto endjob;
+     }
+
+    if ((flags & (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) ==
+        VIR_DOMAIN_VCPU_LIVE && vm->def->maxvcpus < max) {
+        max = vm->def->maxvcpus;
+    }
+
+     if (nvcpus > max) {
+         qemuReportError(VIR_ERR_INVALID_ARG,
+                         _("requested vcpus is greater than max allowable"
+@@ -5992,7 +6011,49 @@ qemudDomainSetVcpusFlags(virDomainPtr dom, unsigned int nvcpus,
+         goto endjob;
+     }
+
+-    ret = qemudDomainHotplugVcpus(vm, nvcpus);
+    switch (flags) {
+    case VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_CONFIG:
+        def = vm->def;
+        if (virDomainObjIsActive(vm)) {
+            if (vm->newDef)
+                def = vm->newDef;
+            else{
+                qemuReportError(VIR_ERR_OPERATION_INVALID, "%s",
+                                _("no persistent state"));
+                goto endjob;
+            }
+        }
+        def->maxvcpus = nvcpus;
+        if (nvcpus < vm->newDef->vcpus)
+            def->vcpus = nvcpus;
+        ret = 0;
+        break;
+
+    case VIR_DOMAIN_VCPU_CONFIG:
+        def = vm->def;
+        if (virDomainObjIsActive(vm)) {
+            if (vm->newDef)
+                def = vm->newDef;
+            else {
+                qemuReportError(VIR_ERR_OPERATION_INVALID, "%s",
+                                _("no persistent state"));
+                goto endjob;
+            }
+        }
+        def->vcpus = nvcpus;
+        ret = 0;
+        break;
+
+    case VIR_DOMAIN_VCPU_LIVE:
+        ret = qemudDomainHotplugVcpus(vm, nvcpus);
+        break;
+
+    case VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG:
+        ret = qemudDomainHotplugVcpus(vm, nvcpus);
+        if (ret == 0 && vm->newDef)
+            vm->newDef->vcpus = nvcpus;
+        break;
+    }
+
+ endjob:
+     if (qemuDomainObjEndJob(vm) == 0)
+@@ -6171,12 +6232,17 @@ qemudDomainGetVcpusFlags(virDomainPtr dom, unsigned int flags)
+ {
+     struct qemud_driver *driver = dom->conn->privateData;
+     virDomainObjPtr vm;
+-    const char *type;
+    virDomainDefPtr def;
+     int ret = -1;
+
+-    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+-        qemuReportError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+-                        flags);
+    virCheckFlags(VIR_DOMAIN_VCPU_LIVE |
+                  VIR_DOMAIN_VCPU_CONFIG |
+                  VIR_DOMAIN_VCPU_MAXIMUM, -1);
+
+    /* Exactly one of LIVE or CONFIG must be set.  */
+    if (!(flags & VIR_DOMAIN_VCPU_LIVE) == !(flags & VIR_DOMAIN_VCPU_CONFIG)) {
+        qemuReportError(VIR_ERR_INVALID_ARG,
+                        _("invalid flag combination: (0x%x)"), flags);
+         return -1;
+     }
+
+@@ -6192,14 +6258,18 @@ qemudDomainGetVcpusFlags(virDomainPtr dom, unsigned int flags)
+         goto cleanup;
+     }
+
+-    if (!(type = virDomainVirtTypeToString(vm->def->virtType))) {
+-        qemuReportError(VIR_ERR_INTERNAL_ERROR,
+-                        _("unknown virt type in domain definition '%d'"),
+-                        vm->def->virtType);
+-        goto cleanup;
+    if (flags & VIR_DOMAIN_VCPU_LIVE) {
+        if (!virDomainObjIsActive(vm)) {
+            qemuReportError(VIR_ERR_OPERATION_INVALID, "%s",
+                            _("domain not active"));
+            goto cleanup;
+        }
+        def = vm->def;
+    } else {
+        def = vm->newDef ? vm->newDef : vm->def;
+     }
+
+-    ret = qemudGetMaxVCPUs(NULL, type);
+    ret = (flags & VIR_DOMAIN_VCPU_MAXIMUM) ? def->maxvcpus : def->vcpus;
+
+ cleanup:
+     if (vm)
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0012-improve-vcpu-support-in-xen-command-line.patch
+++ b/docs/api_extension/0012-improve-vcpu-support-in-xen-command-line.patch
@@ -0,0 +1,294 @@
+From 0fab10e5ed971ab4f960a53e9640b0672f4b8ac3 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Tue, 5 Oct 2010 08:18:52 -0600
+Subject: [PATCH 12/15] vcpu: improve vcpu support in xen command line
+
+This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
+(xend_internal), but leaves out changes for xenapi drivers.
+
+See this link for more details about vcpu_avail for xm usage.
+http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html
+
+This relies on the fact that def->maxvcpus can be at most 32 with xen.
+
+* src/xen/xend_internal.c (xenDaemonParseSxpr)
+(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
+when current vcpus is less than maximum.
+* src/xen/xm_internal.c (xenXMDomainConfigParse)
+(xenXMDomainConfigFormat): Likewise.
+* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
+* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
+* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
+* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
+* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
+* tests/xml2sexprtest.c (mymain): New test.
+* tests/sexpr2xmltest.c (mymain): Likewise.
+* tests/xmconfigtest.c (mymain): Likewise.
+---
+ src/xen/xend_internal.c                      |   19 +++++++++++++--
+ src/xen/xm_internal.c                        |   10 ++++++-
+ tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr |    1 +
+ tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml   |   27 +++++++++++++++++++++
+ tests/sexpr2xmltest.c                        |    1 +
+ tests/xmconfigdata/test-paravirt-vcpu.cfg    |   17 +++++++++++++
+ tests/xmconfigdata/test-paravirt-vcpu.xml    |   32 ++++++++++++++++++++++++++
+ tests/xmconfigtest.c                         |    1 +
+ tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr |    1 +
+ tests/xml2sexprtest.c                        |    1 +
+ 10 files changed, 105 insertions(+), 5 deletions(-)
+ create mode 100644 tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr
+ create mode 100644 tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml
+ create mode 100644 tests/xmconfigdata/test-paravirt-vcpu.cfg
+ create mode 100644 tests/xmconfigdata/test-paravirt-vcpu.xml
+ create mode 100644 tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr
+
+diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
+index 456b477..dfc6415 100644
+--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
+@@ -44,6 +44,7 @@
+ #include "xen_hypervisor.h"
+ #include "xs_internal.h" /* To extract VNC port & Serial console TTY */
+ #include "memory.h"
+#include "count-one-bits.h"
+
+ /* required for cpumap_t */
+ #include <xen/dom0_ops.h>
+@@ -2191,7 +2192,9 @@ xenDaemonParseSxpr(virConnectPtr conn,
+     }
+
+     def->maxvcpus = sexpr_int(root, "domain/vcpus");
+-    def->vcpus = def->maxvcpus;
+    def->vcpus = count_one_bits(sexpr_int(root, "domain/vcpu_avail"));
+    if (!def->vcpus || def->maxvcpus < def->vcpus)
+        def->vcpus = def->maxvcpus;
+
+     tmp = sexpr_node(root, "domain/on_poweroff");
+     if (tmp != NULL) {
+@@ -2433,7 +2436,7 @@ sexpr_to_xend_domain_info(virDomainPtr domain, const struct sexpr *root,
+                           virDomainInfoPtr info)
+ {
+     const char *flags;
+-
+    int vcpus;
+
+     if ((root == NULL) || (info == NULL))
+         return (-1);
+@@ -2464,7 +2467,11 @@ sexpr_to_xend_domain_info(virDomainPtr domain, const struct sexpr *root,
+             info->state = VIR_DOMAIN_NOSTATE;
+     }
+     info->cpuTime = sexpr_float(root, "domain/cpu_time") * 1000000000;
+-    info->nrVirtCpu = sexpr_int(root, "domain/vcpus");
+    vcpus = sexpr_int(root, "domain/vcpus");
+    info->nrVirtCpu = count_one_bits(sexpr_int(root, "domain/vcpu_avail"));
+    if (!info->nrVirtCpu || vcpus < info->nrVirtCpu)
+        info->nrVirtCpu = vcpus;
+
+     return (0);
+ }
+
+@@ -5668,6 +5675,9 @@ xenDaemonFormatSxpr(virConnectPtr conn,
+     virBufferAsprintf(&buf, "(memory %lu)(maxmem %lu)",
+                       def->mem.cur_balloon/1024, def->mem.max_balloon/1024);
+     virBufferAsprintf(&buf, "(vcpus %u)", def->maxvcpus);
+    /* Computing the vcpu_avail bitmask works because MAX_VIRT_CPUS is 32.  */
+    if (def->vcpus < def->maxvcpus)
+        virBufferAsprintf(&buf, "(vcpu_avail %u)", (1U << def->vcpus) - 1);
+
+     if (def->cpumask) {
+         char *ranges = virDomainCpuSetFormat(def->cpumask, def->cpumasklen);
+@@ -5763,6 +5773,9 @@ xenDaemonFormatSxpr(virConnectPtr conn,
+                 virBufferAsprintf(&buf, "(kernel '%s')", def->os.loader);
+
+             virBufferAsprintf(&buf, "(vcpus %u)", def->maxvcpus);
+            if (def->vcpus < def->maxvcpus)
+                virBufferAsprintf(&buf, "(vcpu_avail %u)",
+                                  (1U << def->vcpus) - 1);
+
+             for (i = 0 ; i < def->os.nBootDevs ; i++) {
+                 switch (def->os.bootDevs[i]) {
+diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c
+index bf20a64..f7121ab 100644
+--- a/src/xen/xm_internal.c
+++ b/src/xen/xm_internal.c
+@@ -46,6 +46,7 @@
+ #include "util.h"
+ #include "memory.h"
+ #include "logging.h"
+#include "count-one-bits.h"
+
+ #define VIR_FROM_THIS VIR_FROM_XENXM
+
+@@ -772,10 +773,12 @@ xenXMDomainConfigParse(virConnectPtr conn, virConfPtr conf) {
+     def->mem.max_balloon *= 1024;
+
+     if (xenXMConfigGetULong(conf, "vcpus", &count, 1) < 0 ||
+-        (unsigned short) count != count)
+        MAX_VIRT_CPUS < count)
+         goto cleanup;
+     def->maxvcpus = count;
+-    def->vcpus = def->maxvcpus;
+    if (xenXMConfigGetULong(conf, "vcpu_avail", &count, -1) < 0)
+        goto cleanup;
+    def->vcpus = MIN(count_one_bits(count), def->maxvcpus);
+
+     if (xenXMConfigGetString(conf, "cpus", &str, NULL) < 0)
+         goto cleanup;
+@@ -2246,6 +2249,9 @@ virConfPtr xenXMDomainConfigFormat(virConnectPtr conn,
+
+     if (xenXMConfigSetInt(conf, "vcpus", def->maxvcpus) < 0)
+         goto no_memory;
+    if (def->vcpus < def->maxvcpus &&
+        xenXMConfigSetInt(conf, "vcpu_avail", (1U << def->vcpus) - 1) < 0)
+        goto no_memory;
+
+     if ((def->cpumask != NULL) &&
+         ((cpus = virDomainCpuSetFormat(def->cpumask,
+diff --git a/tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr b/tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr
+new file mode 100644
+index 0000000..2be6822
+--- /dev/null
+++ b/tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr
+@@ -0,0 +1 @@
+(domain (domid 6)(name 'pvtest')(memory 420)(maxmem 420)(vcpus 4)(vcpu_avail 3)(uuid '596a5d2171f48fb2e068e2386a5c413e')(on_poweroff 'destroy')(on_reboot 'destroy')(on_crash 'destroy')(image (linux (kernel '/var/lib/xen/vmlinuz.2Dn2YT')(ramdisk '/var/lib/xen/initrd.img.0u-Vhq')(args ' method=http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5.91/x86_64/os  ')))(device (vbd (dev 'xvda')(uname 'file:/root/some.img')(mode 'w'))))
+diff --git a/tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml b/tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml
+new file mode 100644
+index 0000000..0d6bf11
+--- /dev/null
+++ b/tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml
+@@ -0,0 +1,27 @@
+<domain type='xen' id='6'>
+  <name>pvtest</name>
+  <uuid>596a5d21-71f4-8fb2-e068-e2386a5c413e</uuid>
+  <memory>430080</memory>
+  <currentMemory>430080</currentMemory>
+  <vcpu current='2'>4</vcpu>
+  <os>
+    <type>linux</type>
+    <kernel>/var/lib/xen/vmlinuz.2Dn2YT</kernel>
+    <initrd>/var/lib/xen/initrd.img.0u-Vhq</initrd>
+    <cmdline> method=http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5.91/x86_64/os  </cmdline>
+  </os>
+  <clock offset='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>destroy</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <disk type='file' device='disk'>
+      <driver name='file'/>
+      <source file='/root/some.img'/>
+      <target dev='xvda' bus='xen'/>
+    </disk>
+    <console type='pty'>
+      <target type='xen' port='0'/>
+    </console>
+  </devices>
+</domain>
+diff --git a/tests/sexpr2xmltest.c b/tests/sexpr2xmltest.c
+index d62b44f..f100dd8 100644
+--- a/tests/sexpr2xmltest.c
+++ b/tests/sexpr2xmltest.c
+@@ -132,6 +132,7 @@ mymain(int argc, char **argv)
+     DO_TEST("pv-vfb-type-crash", "pv-vfb-type-crash", 3);
+     DO_TEST("fv-autoport", "fv-autoport", 3);
+     DO_TEST("pv-bootloader", "pv-bootloader", 1);
+    DO_TEST("pv-vcpus", "pv-vcpus", 1);
+
+     DO_TEST("disk-file", "disk-file", 2);
+     DO_TEST("disk-block", "disk-block", 2);
+diff --git a/tests/xmconfigdata/test-paravirt-vcpu.cfg b/tests/xmconfigdata/test-paravirt-vcpu.cfg
+new file mode 100644
+index 0000000..24c78f4
+--- /dev/null
+++ b/tests/xmconfigdata/test-paravirt-vcpu.cfg
+@@ -0,0 +1,17 @@
+name = "XenGuest1"
+uuid = "c7a5fdb0-cdaf-9455-926a-d65c16db1809"
+maxmem = 579
+memory = 394
+vcpus = 4
+vcpu_avail = 3
+bootloader = "/usr/bin/pygrub"
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vncpasswd = "123poi"
+disk = [ "phy:/dev/HostVG/XenGuest1,xvda,w" ]
+vif = [ "mac=00:16:3e:66:94:9c,bridge=br0,script=vif-bridge" ]
+diff --git a/tests/xmconfigdata/test-paravirt-vcpu.xml b/tests/xmconfigdata/test-paravirt-vcpu.xml
+new file mode 100644
+index 0000000..0be9456
+--- /dev/null
+++ b/tests/xmconfigdata/test-paravirt-vcpu.xml
+@@ -0,0 +1,32 @@
+<domain type='xen'>
+  <name>XenGuest1</name>
+  <uuid>c7a5fdb0-cdaf-9455-926a-d65c16db1809</uuid>
+  <memory>592896</memory>
+  <currentMemory>403456</currentMemory>
+  <vcpu current='2'>4</vcpu>
+  <bootloader>/usr/bin/pygrub</bootloader>
+  <os>
+    <type arch='i686' machine='xenpv'>linux</type>
+  </os>
+  <clock offset='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>restart</on_crash>
+  <devices>
+    <disk type='block' device='disk'>
+      <driver name='phy'/>
+      <source dev='/dev/HostVG/XenGuest1'/>
+      <target dev='xvda' bus='xen'/>
+    </disk>
+    <interface type='bridge'>
+      <mac address='00:16:3e:66:94:9c'/>
+      <source bridge='br0'/>
+      <script path='vif-bridge'/>
+    </interface>
+    <console type='pty'>
+      <target type='xen' port='0'/>
+    </console>
+    <input type='mouse' bus='xen'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' passwd='123poi'/>
+  </devices>
+</domain>
+diff --git a/tests/xmconfigtest.c b/tests/xmconfigtest.c
+index 221b322..ea00747 100644
+--- a/tests/xmconfigtest.c
+++ b/tests/xmconfigtest.c
+@@ -210,6 +210,7 @@ mymain(int argc, char **argv)
+     DO_TEST("paravirt-new-pvfb-vncdisplay", 3);
+     DO_TEST("paravirt-net-e1000", 3);
+     DO_TEST("paravirt-net-vifname", 3);
+    DO_TEST("paravirt-vcpu", 2);
+     DO_TEST("fullvirt-old-cdrom", 1);
+     DO_TEST("fullvirt-new-cdrom", 2);
+     DO_TEST("fullvirt-utc", 2);
+diff --git a/tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr b/tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr
+new file mode 100644
+index 0000000..e886545
+--- /dev/null
+++ b/tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr
+@@ -0,0 +1 @@
+(vm (name 'pvtest')(memory 420)(maxmem 420)(vcpus 4)(vcpu_avail 3)(uuid '596a5d21-71f4-8fb2-e068-e2386a5c413e')(on_poweroff 'destroy')(on_reboot 'destroy')(on_crash 'destroy')(image (linux (kernel '/var/lib/xen/vmlinuz.2Dn2YT')(ramdisk '/var/lib/xen/initrd.img.0u-Vhq')(args ' method=http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5.91/x86_64/os  ')))(device (vbd (dev 'xvda')(uname 'file:/root/some.img')(mode 'w'))))
+\ No newline at end of file
+diff --git a/tests/xml2sexprtest.c b/tests/xml2sexprtest.c
+index 77cf760..9cf8d39 100644
+--- a/tests/xml2sexprtest.c
+++ b/tests/xml2sexprtest.c
+@@ -118,6 +118,7 @@ mymain(int argc, char **argv)
+     DO_TEST("pv-vfb-new", "pv-vfb-new", "pvtest", 3);
+     DO_TEST("pv-vfb-new-auto", "pv-vfb-new-auto", "pvtest", 3);
+     DO_TEST("pv-bootloader", "pv-bootloader", "pvtest", 1);
+    DO_TEST("pv-vcpus", "pv-vcpus", "pvtest", 1);
+
+     DO_TEST("disk-file", "disk-file", "pvtest", 2);
+     DO_TEST("disk-block", "disk-block", "pvtest", 2);
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0013-improve-getting-xen-vcpu-counts.patch
+++ b/docs/api_extension/0013-improve-getting-xen-vcpu-counts.patch
@@ -0,0 +1,216 @@
+From 290ea33111be7bdf1f1381b90de33eb0e67c1a15 Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Wed, 6 Oct 2010 17:54:41 -0600
+Subject: [PATCH 13/15] vcpu: improve support for getting xen vcpu counts
+
+* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Support
+more flags.
+* src/xen/xend_internal.h (xenDaemonDomainGetVcpusFlags): New
+prototype.
+* src/xen/xm_internal.h (xenXMDomainGetVcpusFlags): Likewise.
+* src/xen/xend_internal.c (virDomainGetVcpusFlags): New function.
+* src/xen/xm_internal.c (xenXMDomainGetVcpusFlags): Likewise.
+---
+ src/xen/xen_driver.c    |   31 +++++++++++++++++++--------
+ src/xen/xend_internal.c |   52 +++++++++++++++++++++++++++++++++++++++++++++++
+ src/xen/xend_internal.h |    2 +
+ src/xen/xm_internal.c   |   47 ++++++++++++++++++++++++++++++++++++++++++
+ src/xen/xm_internal.h   |    1 +
+ 5 files changed, 124 insertions(+), 9 deletions(-)
+
+diff --git a/src/xen/xen_driver.c b/src/xen/xen_driver.c
+index d6c9c57..fe2ff86 100644
+--- a/src/xen/xen_driver.c
+++ b/src/xen/xen_driver.c
+@@ -1142,20 +1142,33 @@ static int
+ xenUnifiedDomainGetVcpusFlags (virDomainPtr dom, unsigned int flags)
+ {
+     GET_PRIVATE(dom->conn);
+-    int i, ret;
+    int ret;
+
+-    if (flags != (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_MAXIMUM)) {
+-        xenUnifiedError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+-                        flags);
+    virCheckFlags(VIR_DOMAIN_VCPU_LIVE |
+                  VIR_DOMAIN_VCPU_CONFIG |
+                  VIR_DOMAIN_VCPU_MAXIMUM, -1);
+
+    /* Exactly one of LIVE or CONFIG must be set.  */
+    if (!(flags & VIR_DOMAIN_VCPU_LIVE) == !(flags & VIR_DOMAIN_VCPU_CONFIG)) {
+        xenUnifiedError(VIR_ERR_INVALID_ARG,
+                        _("invalid flag combination: (0x%x)"), flags);
+         return -1;
+     }
+
+-    for (i = 0; i < XEN_UNIFIED_NR_DRIVERS; ++i)
+-        if (priv->opened[i] && drivers[i]->domainGetMaxVcpus) {
+-            ret = drivers[i]->domainGetMaxVcpus (dom);
+-            if (ret != 0) return ret;
+-        }
+    if (priv->opened[XEN_UNIFIED_XEND_OFFSET]) {
+        ret = xenDaemonDomainGetVcpusFlags(dom, flags);
+        if (ret != -2)
+            return ret;
+    }
+    if (priv->opened[XEN_UNIFIED_XM_OFFSET]) {
+        ret = xenXMDomainGetVcpusFlags(dom, flags);
+        if (ret != -2)
+            return ret;
+    }
+    if (flags == (VIR_DOMAIN_VCPU_CONFIG | VIR_DOMAIN_VCPU_MAXIMUM))
+        return xenHypervisorGetVcpuMax(dom);
+
+    xenUnifiedError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+     return -1;
+ }
+
+diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
+index dfc6415..3642296 100644
+--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
+@@ -3620,6 +3620,58 @@ xenDaemonDomainPinVcpu(virDomainPtr domain, unsigned int vcpu,
+ }
+
+ /**
+ * xenDaemonDomainGetVcpusFlags:
+ * @domain: pointer to domain object
+ * @flags: bitwise-ORd from virDomainVcpuFlags
+ *
+ * Extract information about virtual CPUs of domain according to flags.
+ *
+ * Returns the number of vcpus on success, -1 if an error message was
+ * issued, and -2 if the unified driver should keep trying.
+
+ */
+int
+xenDaemonDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags)
+{
+    struct sexpr *root;
+    int ret;
+    xenUnifiedPrivatePtr priv;
+
+    if (domain == NULL || domain->conn == NULL || domain->name == NULL) {
+        virXendError(VIR_ERR_INVALID_ARG, __FUNCTION__);
+        return -1;
+    }
+
+    priv = (xenUnifiedPrivatePtr) domain->conn->privateData;
+
+    /* If xendConfigVersion is 2, then we can only report _LIVE (and
+     * xm_internal reports _CONFIG).  If it is 3, then _LIVE and
+     * _CONFIG are always in sync for a running system.  */
+    if (domain->id < 0 && priv->xendConfigVersion < XEND_CONFIG_VERSION_3_0_4)
+        return -2;
+    if (domain->id < 0 && (flags & VIR_DOMAIN_VCPU_LIVE)) {
+        virXendError(VIR_ERR_OPERATION_INVALID, "%s",
+                     _("domain not active"));
+        return -1;
+    }
+
+    root = sexpr_get(domain->conn, "/xend/domain/%s?detail=1", domain->name);
+    if (root == NULL)
+        return -1;
+
+    ret = sexpr_int(root, "domain/vcpus");
+    if (!(flags & VIR_DOMAIN_VCPU_MAXIMUM)) {
+        int vcpus = count_one_bits(sexpr_int(root, "domain/vcpu_avail"));
+        if (vcpus)
+            ret = MIN(vcpus, ret);
+    }
+    if (!ret)
+        ret = -2;
+    sexpr_free(root);
+    return ret;
+}
+
+/**
+  * virDomainGetVcpus:
+  * @domain: pointer to domain object, or NULL for Domain0
+  * @info: pointer to an array of virVcpuInfo structures (OUT)
+diff --git a/src/xen/xend_internal.h b/src/xen/xend_internal.h
+index c757716..923cebd 100644
+--- a/src/xen/xend_internal.h
+++ b/src/xen/xend_internal.h
+@@ -155,6 +155,8 @@ int	xenDaemonDomainPinVcpu		(virDomainPtr domain,
+                                          unsigned int vcpu,
+                                          unsigned char *cpumap,
+                                          int maplen);
+int     xenDaemonDomainGetVcpusFlags    (virDomainPtr domain,
+                                         unsigned int flags);
+ int	xenDaemonDomainGetVcpus		(virDomainPtr domain,
+                                          virVcpuInfoPtr info,
+                                          int maxinfo,
+diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c
+index f7121ab..4ea4245 100644
+--- a/src/xen/xm_internal.c
+++ b/src/xen/xm_internal.c
+@@ -1671,6 +1671,53 @@ cleanup:
+ }
+
+ /**
+ * xenXMDomainGetVcpusFlags:
+ * @domain: pointer to domain object
+ * @flags: bitwise-ORd from virDomainVcpuFlags
+ *
+ * Extract information about virtual CPUs of domain according to flags.
+ *
+ * Returns the number of vcpus on success, -1 if an error message was
+ * issued, and -2 if the unified driver should keep trying.
+ */
+int
+xenXMDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags)
+{
+    xenUnifiedPrivatePtr priv;
+    const char *filename;
+    xenXMConfCachePtr entry;
+    int ret = -2;
+
+    if ((domain == NULL) || (domain->conn == NULL) || (domain->name == NULL)) {
+        xenXMError(VIR_ERR_INVALID_ARG, __FUNCTION__);
+        return -1;
+    }
+
+    if (domain->id != -1)
+        return -2;
+    if (flags & VIR_DOMAIN_VCPU_LIVE) {
+        xenXMError(VIR_ERR_OPERATION_FAILED, "%s", _("domain not active"));
+        return -1;
+    }
+
+    priv = domain->conn->privateData;
+    xenUnifiedLock(priv);
+
+    if (!(filename = virHashLookup(priv->nameConfigMap, domain->name)))
+        goto cleanup;
+
+    if (!(entry = virHashLookup(priv->configCache, filename)))
+        goto cleanup;
+
+    ret = ((flags & VIR_DOMAIN_VCPU_MAXIMUM) ? entry->def->maxvcpus
+           : entry->def->vcpus);
+
+cleanup:
+    xenUnifiedUnlock(priv);
+    return ret;
+}
+
+/**
+  * xenXMDomainPinVcpu:
+  * @domain: pointer to domain object
+  * @vcpu: virtual CPU number (reserved)
+diff --git a/src/xen/xm_internal.h b/src/xen/xm_internal.h
+index 3ad3456..3295fbd 100644
+--- a/src/xen/xm_internal.h
+++ b/src/xen/xm_internal.h
+@@ -45,6 +45,7 @@ int xenXMDomainSetMemory(virDomainPtr domain, unsigned long memory);
+ int xenXMDomainSetMaxMemory(virDomainPtr domain, unsigned long memory);
+ unsigned long xenXMDomainGetMaxMemory(virDomainPtr domain);
+ int xenXMDomainSetVcpus(virDomainPtr domain, unsigned int vcpus);
+int xenXMDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags);
+ int xenXMDomainPinVcpu(virDomainPtr domain, unsigned int vcpu,
+                        unsigned char *cpumap, int maplen);
+ virDomainPtr xenXMDomainLookupByName(virConnectPtr conn, const char *domname);
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0014-improve-setting-xen-vcpu-counts.patch
+++ b/docs/api_extension/0014-improve-setting-xen-vcpu-counts.patch
@@ -0,0 +1,342 @@
+From e443a003129a172a7332f3cb6e40b3c39363ed5e Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Thu, 14 Oct 2010 16:17:18 -0600
+Subject: [PATCH 14/15] vcpu: improve support for setting xen vcpu counts
+
+Tested with RHEL 5.6 (xendConfigVersion 2, where xend_internal
+controls live domains and xm_internal controls inactive domains).
+Hopefully this works with xendConfigVersion 3 (where xend_internal
+controls everything).
+
+* src/xen/xen_driver.c (xenUnifiedDomainSetVcpusFlags): Support
+more flags.
+(xenUnifiedGetMaxVcpus): Export.
+* src/xen/xm_internal.h (xenXMDomainSetVcpusFlags): New prototype.
+* src/xen/xend_internal.h (xenDaemonDomainSetVcpusFlags): Likewise.
+* src/xen/xen_driver.h (xenUnifiedGetMaxVcpus): Likewise.
+* src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): New function.
+* src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags): Likewise.
+---
+ src/xen/xen_driver.c    |   60 ++++++++++++++++++++++++---------
+ src/xen/xen_driver.h    |    1 +
+ src/xen/xend_internal.c |   76 +++++++++++++++++++++++++++++++++++++++++++
+ src/xen/xend_internal.h |    3 ++
+ src/xen/xm_internal.c   |   83 +++++++++++++++++++++++++++++++++++++++++++++++
+ src/xen/xm_internal.h   |    2 +
+ 6 files changed, 208 insertions(+), 17 deletions(-)
+
+diff --git a/src/xen/xen_driver.c b/src/xen/xen_driver.c
+index fe2ff86..66e8518 100644
+--- a/src/xen/xen_driver.c
+++ b/src/xen/xen_driver.c
+@@ -508,7 +508,7 @@ xenUnifiedIsSecure(virConnectPtr conn)
+     return ret;
+ }
+
+-static int
+int
+ xenUnifiedGetMaxVcpus (virConnectPtr conn, const char *type)
+ {
+     GET_PRIVATE(conn);
+@@ -1073,36 +1073,62 @@ xenUnifiedDomainSetVcpusFlags (virDomainPtr dom, unsigned int nvcpus,
+                                unsigned int flags)
+ {
+     GET_PRIVATE(dom->conn);
+-    int i;
+    int ret;
+
+    virCheckFlags(VIR_DOMAIN_VCPU_LIVE |
+                  VIR_DOMAIN_VCPU_CONFIG |
+                  VIR_DOMAIN_VCPU_MAXIMUM, -1);
+
+-    if (flags != VIR_DOMAIN_VCPU_LIVE) {
+-        xenUnifiedError(VIR_ERR_INVALID_ARG, _("unsupported flags: (0x%x)"),
+-                        flags);
+    /* At least one of LIVE or CONFIG must be set.  MAXIMUM cannot be
+     * mixed with LIVE.  */
+    if ((flags & (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG)) == 0 ||
+        (flags & (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) ==
+         (VIR_DOMAIN_VCPU_MAXIMUM | VIR_DOMAIN_VCPU_LIVE)) {
+        xenUnifiedError(VIR_ERR_INVALID_ARG,
+                        _("invalid flag combination: (0x%x)"), flags);
+        return -1;
+    }
+    if (!nvcpus || (unsigned short) nvcpus != nvcpus) {
+        xenUnifiedError(VIR_ERR_INVALID_ARG,
+                        _("argument out of range: %d"), nvcpus);
+         return -1;
+     }
+
+     /* Try non-hypervisor methods first, then hypervisor direct method
+      * as a last resort.
+      */
+-    for (i = 0; i < XEN_UNIFIED_NR_DRIVERS; ++i)
+-        if (i != XEN_UNIFIED_HYPERVISOR_OFFSET &&
+-            priv->opened[i] &&
+-            drivers[i]->domainSetVcpus &&
+-            drivers[i]->domainSetVcpus (dom, nvcpus) == 0)
+-            return 0;
+-
+-    if (priv->opened[XEN_UNIFIED_HYPERVISOR_OFFSET] &&
+-        drivers[XEN_UNIFIED_HYPERVISOR_OFFSET]->domainSetVcpus &&
+-        drivers[XEN_UNIFIED_HYPERVISOR_OFFSET]->domainSetVcpus (dom, nvcpus) == 0)
+-        return 0;
+    if (priv->opened[XEN_UNIFIED_XEND_OFFSET]) {
+        ret = xenDaemonDomainSetVcpusFlags(dom, nvcpus, flags);
+        if (ret != -2)
+            return ret;
+    }
+    if (priv->opened[XEN_UNIFIED_XM_OFFSET]) {
+        ret = xenXMDomainSetVcpusFlags(dom, nvcpus, flags);
+        if (ret != -2)
+            return ret;
+    }
+    if (flags == VIR_DOMAIN_VCPU_LIVE)
+        return xenHypervisorSetVcpus(dom, nvcpus);
+
+    xenUnifiedError(VIR_ERR_NO_SUPPORT, __FUNCTION__);
+     return -1;
+ }
+
+ static int
+ xenUnifiedDomainSetVcpus (virDomainPtr dom, unsigned int nvcpus)
+ {
+-    return xenUnifiedDomainSetVcpusFlags(dom, nvcpus, VIR_DOMAIN_VCPU_LIVE);
+    unsigned int flags = VIR_DOMAIN_VCPU_LIVE;
+    xenUnifiedPrivatePtr priv;
+
+    /* Per the documented API, it is hypervisor-dependent whether this
+     * affects just _LIVE or _LIVE|_CONFIG; in xen's case, that
+     * depends on xendConfigVersion.  */
+    if (dom) {
+        priv = dom->conn->privateData;
+        if (priv->xendConfigVersion >= XEND_CONFIG_VERSION_3_0_4)
+            flags |= VIR_DOMAIN_VCPU_CONFIG;
+    }
+    return xenUnifiedDomainSetVcpusFlags(dom, nvcpus, flags);
+ }
+
+ static int
+diff --git a/src/xen/xen_driver.h b/src/xen/xen_driver.h
+index 3e7c1d0..115a26a 100644
+--- a/src/xen/xen_driver.h
+++ b/src/xen/xen_driver.h
+@@ -220,6 +220,7 @@ int  xenUnifiedRemoveDomainInfo(xenUnifiedDomainInfoListPtr info,
+ void xenUnifiedDomainEventDispatch (xenUnifiedPrivatePtr priv,
+                                     virDomainEventPtr event);
+ unsigned long xenUnifiedVersion(void);
+int xenUnifiedGetMaxVcpus(virConnectPtr conn, const char *type);
+
+ # ifndef PROXY
+ void xenUnifiedLock(xenUnifiedPrivatePtr priv);
+diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
+index 3642296..55c2cc4 100644
+--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
+@@ -3535,6 +3535,82 @@ xenDaemonLookupByID(virConnectPtr conn, int id) {
+ }
+
+ /**
+ * xenDaemonDomainSetVcpusFlags:
+ * @domain: pointer to domain object
+ * @nvcpus: the new number of virtual CPUs for this domain
+ * @flags: bitwise-ORd from virDomainVcpuFlags
+ *
+ * Change virtual CPUs allocation of domain according to flags.
+ *
+ * Returns 0 on success, -1 if an error message was issued, and -2 if
+ * the unified driver should keep trying.
+ */
+int
+xenDaemonDomainSetVcpusFlags(virDomainPtr domain, unsigned int vcpus,
+                             unsigned int flags)
+{
+    char buf[VIR_UUID_BUFLEN];
+    xenUnifiedPrivatePtr priv;
+    int max;
+
+    if ((domain == NULL) || (domain->conn == NULL) || (domain->name == NULL)
+        || (vcpus < 1)) {
+        virXendError(VIR_ERR_INVALID_ARG, __FUNCTION__);
+        return (-1);
+    }
+
+    priv = (xenUnifiedPrivatePtr) domain->conn->privateData;
+
+    if ((domain->id < 0 && priv->xendConfigVersion < XEND_CONFIG_VERSION_3_0_4) ||
+        (flags & VIR_DOMAIN_VCPU_MAXIMUM))
+        return -2;
+
+    /* With xendConfigVersion 2, only _LIVE is supported.  With
+     * xendConfigVersion 3, only _LIVE|_CONFIG is supported for
+     * running domains, or _CONFIG for inactive domains.  */
+    if (priv->xendConfigVersion < XEND_CONFIG_VERSION_3_0_4) {
+        if (flags & VIR_DOMAIN_VCPU_CONFIG) {
+            virXendError(VIR_ERR_OPERATION_INVALID, "%s",
+                         _("Xend version does not support modifying "
+                           "persistent config"));
+            return -1;
+        }
+    } else if (domain->id < 0) {
+        if (flags & VIR_DOMAIN_VCPU_LIVE) {
+            virXendError(VIR_ERR_OPERATION_INVALID, "%s",
+                         _("domain not running"));
+            return -1;
+        }
+    } else {
+        if ((flags & (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG)) !=
+            (VIR_DOMAIN_VCPU_LIVE | VIR_DOMAIN_VCPU_CONFIG)) {
+            virXendError(VIR_ERR_OPERATION_INVALID, "%s",
+                         _("Xend only supports modifying both live and "
+                           "persistent config"));
+        }
+    }
+
+    /* Unfortunately, xend_op does not validate whether this exceeds
+     * the maximum.  */
+    flags |= VIR_DOMAIN_VCPU_MAXIMUM;
+    if ((max = xenDaemonDomainGetVcpusFlags(domain, flags)) < 0) {
+        virXendError(VIR_ERR_OPERATION_INVALID, "%s",
+                     _("could not determin max vcpus for the domain"));
+        return -1;
+    }
+    if (vcpus > max) {
+        virXendError(VIR_ERR_INVALID_ARG,
+                     _("requested vcpus is greater than max allowable"
+                       " vcpus for the domain: %d > %d"), vcpus, max);
+        return -1;
+    }
+
+    snprintf(buf, sizeof(buf), "%d", vcpus);
+    return xend_op(domain->conn, domain->name, "op", "set_vcpus", "vcpus",
+                   buf, NULL);
+}
+
+/**
+  * xenDaemonDomainSetVcpus:
+  * @domain: pointer to domain object
+  * @nvcpus: the new number of virtual CPUs for this domain
+diff --git a/src/xen/xend_internal.h b/src/xen/xend_internal.h
+index 923cebd..53f5d2c 100644
+--- a/src/xen/xend_internal.h
+++ b/src/xen/xend_internal.h
+@@ -151,6 +151,9 @@ int xenDaemonDomainUndefine(virDomainPtr domain);
+
+ int	xenDaemonDomainSetVcpus		(virDomainPtr domain,
+                                          unsigned int vcpus);
+int	xenDaemonDomainSetVcpusFlags	(virDomainPtr domain,
+                                         unsigned int vcpus,
+                                         unsigned int flags);
+ int	xenDaemonDomainPinVcpu		(virDomainPtr domain,
+                                          unsigned int vcpu,
+                                          unsigned char *cpumap,
+diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c
+index 4ea4245..2b8e51e 100644
+--- a/src/xen/xm_internal.c
+++ b/src/xen/xm_internal.c
+@@ -1670,6 +1670,89 @@ cleanup:
+     return ret;
+ }
+
+/*
+ * xenXMDomainSetVcpusFlags:
+ * @domain: pointer to domain object
+ * @nvcpus: number of vcpus
+ * @flags: bitwise-ORd from virDomainVcpuFlags
+ *
+ * Change virtual CPUs allocation of domain according to flags.
+ *
+ * Returns 0 on success, -1 if an error message was issued, and -2 if
+ * the unified driver should keep trying.
+ */
+int
+xenXMDomainSetVcpusFlags(virDomainPtr domain, unsigned int vcpus,
+                         unsigned int flags)
+{
+    xenUnifiedPrivatePtr priv;
+    const char *filename;
+    xenXMConfCachePtr entry;
+    int ret = -1;
+    int max;
+
+    if ((domain == NULL) || (domain->conn == NULL) || (domain->name == NULL)) {
+        xenXMError(VIR_ERR_INVALID_ARG, __FUNCTION__);
+        return -1;
+    }
+    if (domain->conn->flags & VIR_CONNECT_RO) {
+        xenXMError(VIR_ERR_OPERATION_DENIED, __FUNCTION__);
+        return -1;
+    }
+    if (domain->id != -1)
+        return -2;
+    if (flags & VIR_DOMAIN_VCPU_LIVE) {
+        xenXMError(VIR_ERR_OPERATION_INVALID, "%s",
+                   _("domain is not running"));
+        return -1;
+    }
+
+    priv = domain->conn->privateData;
+    xenUnifiedLock(priv);
+
+    if (!(filename = virHashLookup(priv->nameConfigMap, domain->name)))
+        goto cleanup;
+
+    if (!(entry = virHashLookup(priv->configCache, filename)))
+        goto cleanup;
+
+    /* Hypervisor maximum. */
+    if ((max = xenUnifiedGetMaxVcpus(domain->conn, NULL)) < 0) {
+        xenXMError(VIR_ERR_INTERNAL_ERROR, "%s",
+                   _("could not determin max vcpus for the domain"));
+        goto cleanup;
+    }
+    /* Can't specify a current larger than stored maximum; but
+     * reducing maximum can silently reduce current.  */
+    if (!(flags & VIR_DOMAIN_VCPU_MAXIMUM))
+        max = entry->def->maxvcpus;
+    if (vcpus > max) {
+        xenXMError(VIR_ERR_INVALID_ARG,
+                   _("requested vcpus is greater than max allowable"
+                     " vcpus for the domain: %d > %d"), vcpus, max);
+        goto cleanup;
+    }
+
+    if (flags & VIR_DOMAIN_VCPU_MAXIMUM) {
+        entry->def->maxvcpus = vcpus;
+        if (entry->def->vcpus > vcpus)
+            entry->def->vcpus = vcpus;
+    } else {
+        entry->def->vcpus = vcpus;
+    }
+
+    /* If this fails, should we try to undo our changes to the
+     * in-memory representation of the config file. I say not!
+     */
+    if (xenXMConfigSaveFile(domain->conn, entry->filename, entry->def) < 0)
+        goto cleanup;
+    ret = 0;
+
+cleanup:
+    xenUnifiedUnlock(priv);
+    return ret;
+}
+
+ /**
+  * xenXMDomainGetVcpusFlags:
+  * @domain: pointer to domain object
+diff --git a/src/xen/xm_internal.h b/src/xen/xm_internal.h
+index 3295fbd..a46e1a2 100644
+--- a/src/xen/xm_internal.h
+++ b/src/xen/xm_internal.h
+@@ -45,6 +45,8 @@ int xenXMDomainSetMemory(virDomainPtr domain, unsigned long memory);
+ int xenXMDomainSetMaxMemory(virDomainPtr domain, unsigned long memory);
+ unsigned long xenXMDomainGetMaxMemory(virDomainPtr domain);
+ int xenXMDomainSetVcpus(virDomainPtr domain, unsigned int vcpus);
+int xenXMDomainSetVcpusFlags(virDomainPtr domain, unsigned int vcpus,
+                             unsigned int flags);
+ int xenXMDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags);
+ int xenXMDomainPinVcpu(virDomainPtr domain, unsigned int vcpu,
+                        unsigned char *cpumap, int maplen);
+-- 
+1.7.2.3
+
--- a/docs/api_extension/0015-remove-dead-xen-code.patch
+++ b/docs/api_extension/0015-remove-dead-xen-code.patch
@@ -0,0 +1,228 @@
+From b013788742183afec9aa5068d3cfd185a3b5c62e Mon Sep 17 00:00:00 2001
+From: Eric Blake <eblake@redhat.com>
+Date: Thu, 7 Oct 2010 08:59:27 -0600
+Subject: [PATCH 15/15] vcpu: remove dead xen code
+
+* src/xen/xen_driver.h (xenUnifiedDriver): Remove now-unused
+domainGetMaxVcpus, domainSetVcpus.
+* src/xen/proxy_internal.c (xenProxyDriver): Likewise.
+* src/xen/xen_hypervisor.c (xenHypervisorDriver): Likewise.
+* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
+* src/xen/xend_internal.c (xenDaemonDriver)
+(xenDaemonDomainSetVcpus): Likewise.
+* src/xen/xm_internal.c (xenXMDriver, xenXMDomainSetVcpus):
+Likewise.
+* src/xen/xs_internal.c (xenStoreDriver): Likewise.
+---
+ src/xen/proxy_internal.c |    2 --
+ src/xen/xen_driver.h     |    4 +---
+ src/xen/xen_hypervisor.c |    2 --
+ src/xen/xen_inotify.c    |    2 --
+ src/xen/xend_internal.c  |   33 ---------------------------------
+ src/xen/xm_internal.c    |   43 -------------------------------------------
+ src/xen/xs_internal.c    |    2 --
+ 7 files changed, 1 insertions(+), 87 deletions(-)
+
+diff --git a/src/xen/proxy_internal.c b/src/xen/proxy_internal.c
+index 335dfc4..4033727 100644
+--- a/src/xen/proxy_internal.c
+++ b/src/xen/proxy_internal.c
+@@ -67,10 +67,8 @@ struct xenUnifiedDriver xenProxyDriver = {
+     NULL, /* domainSave */
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+-    NULL, /* domainSetVcpus */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+-    NULL, /* domainGetMaxVcpus */
+     NULL, /* listDefinedDomains */
+     NULL, /* numOfDefinedDomains */
+     NULL, /* domainCreate */
+diff --git a/src/xen/xen_driver.h b/src/xen/xen_driver.h
+index 115a26a..53f97d4 100644
+--- a/src/xen/xen_driver.h
+++ b/src/xen/xen_driver.h
+@@ -1,7 +1,7 @@
+ /*
+  * xen_unified.c: Unified Xen driver.
+  *
+- * Copyright (C) 2007 Red Hat, Inc.
+ * Copyright (C) 2007, 2010 Red Hat, Inc.
+  *
+  * See COPYING.LIB for the License of this software
+  *
+@@ -84,10 +84,8 @@ struct xenUnifiedDriver {
+         virDrvDomainSave		domainSave;
+         virDrvDomainRestore		domainRestore;
+         virDrvDomainCoreDump		domainCoreDump;
+-        virDrvDomainSetVcpus		domainSetVcpus;
+         virDrvDomainPinVcpu		domainPinVcpu;
+         virDrvDomainGetVcpus		domainGetVcpus;
+-        virDrvDomainGetMaxVcpus		domainGetMaxVcpus;
+         virDrvListDefinedDomains	listDefinedDomains;
+         virDrvNumOfDefinedDomains	numOfDefinedDomains;
+         virDrvDomainCreate		domainCreate;
+diff --git a/src/xen/xen_hypervisor.c b/src/xen/xen_hypervisor.c
+index 6246513..3797865 100644
+--- a/src/xen/xen_hypervisor.c
+++ b/src/xen/xen_hypervisor.c
+@@ -784,10 +784,8 @@ struct xenUnifiedDriver xenHypervisorDriver = {
+     NULL, /* domainSave */
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+-    xenHypervisorSetVcpus, /* domainSetVcpus */
+     xenHypervisorPinVcpu, /* domainPinVcpu */
+     xenHypervisorGetVcpus, /* domainGetVcpus */
+-    xenHypervisorGetVcpuMax, /* domainGetMaxVcpus */
+     NULL, /* listDefinedDomains */
+     NULL, /* numOfDefinedDomains */
+     NULL, /* domainCreate */
+diff --git a/src/xen/xen_inotify.c b/src/xen/xen_inotify.c
+index d24b20f..9507061 100644
+--- a/src/xen/xen_inotify.c
+++ b/src/xen/xen_inotify.c
+@@ -71,10 +71,8 @@ struct xenUnifiedDriver xenInotifyDriver = {
+     NULL, /* domainSave */
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+-    NULL, /* domainSetVcpus */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+-    NULL, /* domainGetMaxVcpus */
+     NULL, /* listDefinedDomains */
+     NULL, /* numOfDefinedDomains */
+     NULL, /* domainCreate */
+diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c
+index 55c2cc4..b90c331 100644
+--- a/src/xen/xend_internal.c
+++ b/src/xen/xend_internal.c
+@@ -3611,37 +3611,6 @@ xenDaemonDomainSetVcpusFlags(virDomainPtr domain, unsigned int vcpus,
+ }
+
+ /**
+- * xenDaemonDomainSetVcpus:
+- * @domain: pointer to domain object
+- * @nvcpus: the new number of virtual CPUs for this domain
+- *
+- * Dynamically change the number of virtual CPUs used by the domain.
+- *
+- * Returns 0 for success; -1 (with errno) on error
+- */
+-int
+-xenDaemonDomainSetVcpus(virDomainPtr domain, unsigned int vcpus)
+-{
+-    char buf[VIR_UUID_BUFLEN];
+-    xenUnifiedPrivatePtr priv;
+-
+-    if ((domain == NULL) || (domain->conn == NULL) || (domain->name == NULL)
+-     || (vcpus < 1)) {
+-        virXendError(VIR_ERR_INVALID_ARG, __FUNCTION__);
+-        return (-1);
+-    }
+-
+-    priv = (xenUnifiedPrivatePtr) domain->conn->privateData;
+-
+-    if (domain->id < 0 && priv->xendConfigVersion < XEND_CONFIG_VERSION_3_0_4)
+-        return(-1);
+-
+-    snprintf(buf, sizeof(buf), "%d", vcpus);
+-    return(xend_op(domain->conn, domain->name, "op", "set_vcpus", "vcpus",
+-                   buf, NULL));
+-}
+-
+-/**
+  * xenDaemonDomainPinCpu:
+  * @domain: pointer to domain object
+  * @vcpu: virtual CPU number
+@@ -5213,10 +5182,8 @@ struct xenUnifiedDriver xenDaemonDriver = {
+     xenDaemonDomainSave,         /* domainSave */
+     xenDaemonDomainRestore,      /* domainRestore */
+     xenDaemonDomainCoreDump,     /* domainCoreDump */
+-    xenDaemonDomainSetVcpus,     /* domainSetVcpus */
+     xenDaemonDomainPinVcpu,      /* domainPinVcpu */
+     xenDaemonDomainGetVcpus,     /* domainGetVcpus */
+-    NULL,                        /* domainGetMaxVcpus */
+     xenDaemonListDefinedDomains, /* listDefinedDomains */
+     xenDaemonNumOfDefinedDomains,/* numOfDefinedDomains */
+     xenDaemonDomainCreate,       /* domainCreate */
+diff --git a/src/xen/xm_internal.c b/src/xen/xm_internal.c
+index 2b8e51e..430d40b 100644
+--- a/src/xen/xm_internal.c
+++ b/src/xen/xm_internal.c
+@@ -103,10 +103,8 @@ struct xenUnifiedDriver xenXMDriver = {
+     NULL, /* domainSave */
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+-    xenXMDomainSetVcpus, /* domainSetVcpus */
+     xenXMDomainPinVcpu, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+-    NULL, /* domainGetMaxVcpus */
+     xenXMListDefinedDomains, /* listDefinedDomains */
+     xenXMNumOfDefinedDomains, /* numOfDefinedDomains */
+     xenXMDomainCreate, /* domainCreate */
+@@ -1630,47 +1628,6 @@ cleanup:
+ }
+
+ /*
+- * Set the VCPU count in config
+- */
+-int xenXMDomainSetVcpus(virDomainPtr domain, unsigned int vcpus) {
+-    xenUnifiedPrivatePtr priv;
+-    const char *filename;
+-    xenXMConfCachePtr entry;
+-    int ret = -1;
+-
+-    if ((domain == NULL) || (domain->conn == NULL) || (domain->name == NULL)) {
+-        xenXMError(VIR_ERR_INVALID_ARG, __FUNCTION__);
+-        return (-1);
+-    }
+-    if (domain->conn->flags & VIR_CONNECT_RO)
+-        return (-1);
+-    if (domain->id != -1)
+-        return (-1);
+-
+-    priv = domain->conn->privateData;
+-    xenUnifiedLock(priv);
+-
+-    if (!(filename = virHashLookup(priv->nameConfigMap, domain->name)))
+-        goto cleanup;
+-
+-    if (!(entry = virHashLookup(priv->configCache, filename)))
+-        goto cleanup;
+-
+-    entry->def->maxvcpus = entry->def->vcpus = vcpus;
+-
+-    /* If this fails, should we try to undo our changes to the
+-     * in-memory representation of the config file. I say not!
+-     */
+-    if (xenXMConfigSaveFile(domain->conn, entry->filename, entry->def) < 0)
+-        goto cleanup;
+-    ret = 0;
+-
+-cleanup:
+-    xenUnifiedUnlock(priv);
+-    return ret;
+-}
+-
+-/*
+  * xenXMDomainSetVcpusFlags:
+  * @domain: pointer to domain object
+  * @nvcpus: number of vcpus
+diff --git a/src/xen/xs_internal.c b/src/xen/xs_internal.c
+index 9296f25..a9817b1 100644
+--- a/src/xen/xs_internal.c
+++ b/src/xen/xs_internal.c
+@@ -67,10 +67,8 @@ struct xenUnifiedDriver xenStoreDriver = {
+     NULL, /* domainSave */
+     NULL, /* domainRestore */
+     NULL, /* domainCoreDump */
+-    NULL, /* domainSetVcpus */
+     NULL, /* domainPinVcpu */
+     NULL, /* domainGetVcpus */
+-    NULL, /* domainGetMaxVcpus */
+     NULL, /* listDefinedDomains */
+     NULL, /* numOfDefinedDomains */
+     NULL, /* domainCreate */
+-- 
+1.7.2.3
+
--- a/docs/apibuild.py
+++ b/docs/apibuild.py
--- a/docs/apple-touch-icon.png
+++ b/docs/apple-touch-icon.png
--- a/docs/apps.html.in
+++ b/docs/apps.html.in
@@ -1,8 +1,6 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
+<html>
  <body>
-    <h1>Applications using libvirt</h1>
+    <h1>Applications using <strong>libvirt</strong></h1>

    <p>
      This page provides an illustration of the wide variety of
@@ -11,7 +9,7 @@

    <ul id="toc"></ul>

-    <h2><a id="add">Add an application</a></h2>
+    <h2><a name="add">Add an application</a></h2>

    <p>
      To add an application not listed on this page, send a message
@@ -19,18 +17,35 @@
      be added here, or simply send a patch against the documentation
      in the libvirt.git docs subdirectory.
      If your application uses libvirt as its API,
-      the following graphics are available for your website to advertise
+      the following graphic is available for your website to advertise
      support for libvirt:
    </p>

    <p class="image">
-      <img src="logos/logo-square-powered-96.png" alt="libvirt powered"/>
-      <img src="logos/logo-square-powered-128.png" alt="libvirt powered"/>
-      <img src="logos/logo-square-powered-192.png" alt="libvirt powered"/>
-      <img src="logos/logo-square-powered-256.png" alt="libvirt powered"/>
+      <img src="madeWith.png" alt="Made with libvirt"/>
    </p>

-    <h2><a id="command">Command line tools</a></h2>
+    <h2><a name="clientserver">Client/Server applications</a></h2>
+
+    <dl>
+      <dt><a href="http://archipelproject.org">Archipel</a></dt>
+      <dd>
+        Archipel is a libvirt-based solution to manage and supervise virtual
+        machines.  It uses XMPP for all communication. There is no web
+        service or custom protocol.  You just need at least one XMPP server,
+        like eJabberd, to start playing with it.  This allows Archipel to
+        work completely real time.  You never have to refresh the user
+        interface, you'll be notified as soon as something happens. You can
+        even use your favorite chat clients to command your infrastructure.
+      </dd>
+      <dd>
+        Isn't it great to be able to open a chat conversation with your
+        virtual machine and say things like "How are you today?" or "Hey,
+        please reboot"?
+      </dd>
+    </dl>
+
+    <h2><a name="command">Command line tools</a></h2>

    <dl>
      <dt><a href="http://libguestfs.org">guestfish</a></dt>
@@ -45,21 +60,21 @@
        management tasks on all libvirt managed domains, networks and
        storage. This is part of the libvirt core distribution.
      </dd>
-      <dt><a href="https://virt-manager.org/">virt-clone</a></dt>
+      <dt><a href="http://virt-manager.org/">virt-clone</a></dt>
      <dd>
        Allows the disk image(s) and configuration for an existing
        virtual machine to be cloned to form a new virtual machine.
        It automates copying of data across to new disk images, and
        updates the UUID, MAC address, and name in the configuration.
      </dd>
-      <dt><a href="https://people.redhat.com/rjones/virt-df/">virt-df</a></dt>
+      <dt><a href="http://et.redhat.com/~rjones/virt-df/">virt-df</a></dt>
      <dd>
        Examine the utilization of each filesystem in a virtual machine
        from the comfort of the host machine. This tool peeks into the
        guest disks and determines how much space is used. It can cope
        with common Linux filesystems and LVM volumes.
      </dd>
-      <dt><a href="https://virt-manager.org/">virt-image</a></dt>
+      <dt><a href="http://virt-manager.org/">virt-image</a></dt>
      <dd>
        Provides a way to deploy virtual appliances. It defines a
        simplified portable XML format describing the pre-requisites
@@ -67,47 +82,28 @@
        into the domain XML format for execution under any libvirt
        hypervisor meeting the pre-requisites.
      </dd>
-      <dt><a href="https://virt-manager.org/">virt-install</a></dt>
+      <dt><a href="http://virt-manager.org/">virt-install</a></dt>
      <dd>
        Provides a way to provision new virtual machines from a
        OS distribution install tree. It supports provisioning from
        local CD images, and the network over NFS, HTTP and FTP.
      </dd>
-      <dt><a href="https://people.redhat.com/rjones/virt-top/">virt-top</a></dt>
+      <dt><a href="http://et.redhat.com/~rjones/virt-top/">virt-top</a></dt>
      <dd>
        Watch the CPU, memory, network and disk utilization of all
        virtual machines running on a host.
      </dd>
      <dt>
-        <a href="https://people.redhat.com/~rjones/virt-what/">virt-what</a>
+        <a href="http://people.redhat.com/~rjones/virt-what/">virt-what</a>
      </dt>
      <dd>
        virt-what is a shell script for detecting if the program is running
        in a virtual machine.  It prints out a list of facts about the
        virtual machine, derived from heuristics.
      </dd>
-      <dt><a href="https://sourceware.org/systemtap/">stap</a></dt>
-      <dd>
-        SystemTap is a tool used to gather rich information about a running
-        system through the use of scripts. Starting from v2.4, the front-end
-        application stap can use libvirt to gather data within virtual
-        machines.
-      </dd>
-      <dt><a href="https://github.com/pradels/vagrant-libvirt/">vagrant-libvirt</a></dt>
-      <dd>
-        Vagrant-Libvirt is a Vagrant plugin that uses libvirt to manage virtual
-        machines. It is a command line tool for developers that makes it very
-        fast and easy to deploy and re-deploy an environment of vm's.
-      </dd>
-      <dt><a href="https://github.com/virt-lightning/virt-lightning">virt-lightning</a></dt>
-      <dd>
-        Virt-Lightning uses libvirt, cloud-init and libguestfs to allow anyone
-        to quickly start a new VM. Very much like a container CLI, but with a
-        virtual machine.
-      </dd>
    </dl>

-    <h2><a id="configmgmt">Configuration Management</a></h2>
+    <h2><a name="configmgmt">Configuration Management</a></h2>

    <dl>
      <dt><a href="https://wiki.lcfg.org/bin/view/LCFG/LcfgLibvirt">LCFG</a></dt>
@@ -125,10 +121,10 @@
      </dd>
    </dl>

-    <h2><a id="continuousintegration">Continuous Integration</a></h2>
+    <h2><a name="continuousintegration">Continuous Integration</a></h2>

    <dl>
-      <dt><a href="http://docs.buildbot.net/latest/manual/configuration/workers-libvirt.html">BuildBot</a></dt>
+      <dt><a href="http://buildbot.net/buildbot/docs/current/Libvirt.html">BuildBot</a></dt>
      <dd>
        BuildBot is a system to automate the compile/test cycle required
        by most software projects.  CVS commits trigger new builds, run on
@@ -138,7 +134,7 @@
    </dl>

    <dl>
-      <dt><a href="https://wiki.jenkins-ci.org/display/JENKINS/Libvirt+Slaves+Plugin">Jenkins</a></dt>
+      <dt><a href="http://wiki.jenkins-ci.org/display/JENKINS/Libvirt+Slaves+Plugin">Jenkins</a></dt>
      <dd>
        This plugin for Jenkins adds a way to control guest domains hosted
        on Xen or QEMU/KVM.  You configure a Jenkins Slave,
@@ -149,24 +145,28 @@
      </dd>
    </dl>

-    <h2><a id="conversion">Conversion</a></h2>
+    <h2><a name="conversion">Conversion</a></h2>

    <dl>
-      <dt><a href="http://libguestfs.org/virt-p2v.1.html">virt-p2v</a></dt>
+      <dt><a href="https://rwmj.wordpress.com/2009/10/13/poor-mans-p2v/">Poor mans p2v</a></dt>
      <dd>
-        Convert a physical machine to run on KVM.  It is a LiveCD
-        which is booted on the machine to be converted.  It collects a
-        little information from the user, then copies the disks over
-        to a remote machine and defines the XML for a domain to run
-        the guest.  (Note this tool is included with libguestfs)
+        A simple approach for converting a physical machine to a virtual
+        machine, using a rescue CD.
      </dd>
-      <dt><a href="http://libguestfs.org/virt-v2v.1.html">virt-v2v</a></dt>
+      <dt><a href="http://et.redhat.com/~rjones/virt-p2v/">virt-p2v</a></dt>
      <dd>
-        virt-v2v converts guests from a foreign hypervisor to run on
-        KVM, managed by libvirt.  It can convert guests from VMware or
-        Xen to run on OpenStack, oVirt (RHEV-M), or local libvirt.  It
+        An older tool for converting a physical machine into a virtual
+        machine.  It is a LiveCD which is booted on the machine to be
+        converted.  It collects a little information from the user, then
+        copies the disks over to a remote machine and defines the XML for a
+        domain to run the guest.
+      </dd>
+      <dt><a href="http://git.fedorahosted.org/git/?p=virt-v2v.git;a=summary">virt-v2v</a></dt>
+      <dd>
+        virt-v2v converts guests from a foreign hypervisor to run on KVM,
+        managed by libvirt.  It can currently convert Red Hat Enterprise
+        Linux (RHEL) and Fedora guests running on Xen and VMware ESX.  It
        will enable VirtIO drivers in the converted guest if possible.
-        (Note this tool is included with libguestfs)
      </dd>
      <dd>
        For RHEL customers of Red Hat, conversion of Windows guests is also
@@ -180,52 +180,36 @@
      </dd>
    </dl>

-    <h2><a id="desktop">Desktop applications</a></h2>
+    <h2><a name="desktop">Desktop applications</a></h2>

    <dl>
-      <dt><a href="https://virt-manager.org/">virt-manager</a></dt>
+      <dt><a href="http://virt-manager.org/">virt-manager</a></dt>
      <dd>
        A general purpose desktop management tool, able to manage
        virtual machines across both local and remotely accessed
        hypervisors. It is targeted at home and small office usage
-        up to managing 10-20 hosts and their VMs.
+        upto managing 10-20 hosts and their VMs.
      </dd>
-      <dt><a href="https://virt-manager.org/">virt-viewer</a></dt>
+      <dt><a href="http://virt-manager.org/">virt-viewer</a></dt>
      <dd>
        A lightweight tool for accessing the graphical console
        associated with a virtual machine. It can securely connect
        to remote consoles supporting the VNC protocol. Also provides
        an optional mozilla browser plugin.
      </dd>
-      <dt><a href="https://f1ash.github.io/qt-virt-manager">qt-virt-manager</a></dt>
-      <dd>
-        The Qt GUI for create and control VMs and another virtual entities
-        (aka networks, storages, interfaces, secrets, network filters).
-        Contains integrated LXC/SPICE/VNC viewer for accessing the graphical or
-        text console associated with a virtual machine or container.
-      </dd>
-      <dt><a href="https://f1ash.github.io/qt-virt-manager/#virtual-machines-viewer">qt-remote-viewer</a></dt>
-      <dd>
-        The Qt VNC/SPICE viewer for access to remote desktops or VMs.
-      </dd>
    </dl>

-    <h2><a id="iaas">Infrastructure as a Service (IaaS)</a></h2>
+    <h2><a name="iaas">Infrastructure as a Service (IaaS)</a></h2>

    <dl>
-      <dt><a href="http://cc1.ifj.edu.pl">Cracow Cloud One</a></dt>
-      <dd>The CC1 system provides a complete solution for Private
-        Cloud Computing. An intuitive web access interface with an
-        administration module and simple installation procedure make
-        it easy to benefit from private Cloud Computing technology.
-      </dd>
-
-      <dt><a href="https://github.com/eucalyptus/eucalyptus">Eucalyptus</a></dt>
-      <dd>
-        Eucalyptus is an on-premise Infrastructure as a Service cloud
-        software platform that is open source and
-        AWS-compatible. Eucalyptus uses libvirt virtualization API to
-        directly interact with Xen and KVM hypervisors.
+      <dt><a href="http://www.emotivecloud.net">EMOTIVE Cloud</a></dt>
+      <dd>The EMOTIVE (Elastic Management Of Tasks In Virtualized
+        Environments) middleware allows executing tasks and providing
+        virtualized environments to the users with Xen, KVM or
+        VirtualBox hypervisor. EMOTIVE's main feature is VM management
+        with different scheduling policies. It can be also used as a
+        cloud provider and is very easy to extend thanks to its
+        modular Web Services architecture.
      </dd>

      <dt><a href="http://www.nimbusproject.org">Nimbus</a></dt>
@@ -235,46 +219,9 @@
        community.  It uses libvirt for communication with all KVM and Xen
        virtual machines.
      </dd>
-
-      <dt><a href="http://snooze.inria.fr">Snooze</a></dt>
-      <dd>
-        Snooze is an open-source scalable, autonomic, and energy-efficient
-        virtual machine (VM) management framework for private clouds. It
-        integrates libvirt for VM monitoring, live migration, and life-cycle
-        management.
-      </dd>
-
-      <dt><a href="https://www.openstack.org">OpenStack</a></dt>
-      <dd>
-        OpenStack is a "cloud operating system" usable for both public
-        and private clouds.  Its various parts take care of compute,
-        storage and networking resources and interface with the user
-        using a dashboard.  Compute part uses libvirt to manage VM
-        life-cycle, monitoring and so on.
-      </dd>
-
-      <dt><a href="https://github.com/gustavfranssonnyvell/cherrypop">Cherrypop</a></dt>
-      <dd>
-        A cloud software with no masters or central points. Nodes
-        autodetect other nodes and autodistribute virtual
-        machines and autodivide up the workload. Also there is no
-        minimum limit for hosts, well, one might be nice. It's
-        perfect for setting up low-end servers in a cloud or a
-        cloud where you want the most bang for the bucks.
-      </dd>
-
-      <dt><a href="http://en.zstack.io/">ZStack</a></dt>
-      <dd>
-        ZStack is an open source IaaS software that aims to automate the
-        management of all resources (compute, storage, networking, etc.) in a
-        datacenter by using APIs, thus conforming to the principles of a
-        software-defined datacenter. The key strengths of ZStack in terms of
-        management are scalability, performance, and a fast, user-friendly
-        deployment.
-      </dd>
    </dl>

-    <h2><a id="libraries">Libraries</a></h2>
+    <h2><a name="libraries">Libraries</a></h2>

    <dl>
      <dt><a href="http://libguestfs.org">libguestfs</a></dt>
@@ -289,28 +236,23 @@
        host, and there is a subproject to allow merging changes into the
        Windows Registry in Windows guests.
      </dd>
-
-      <dt><a href="https://sandbox.libvirt.org">libvirt-sandbox</a></dt>
-      <dd>
-        A library and command line tools for simplifying the creation of
-        application sandboxes using virtualization technology. It currently
-        supports either KVM, QEMU or LXC as backends. Integration with
-        systemd facilitates sandboxing of system services like apache.
-      </dd>
-      <dt><a href="https://github.com/ohadlevy/virt#readme">Ruby
-          Libvirt Object bindings</a></dt>
-      <dd>
-        Allows using simple ruby objects to manipulate
-        hypervisors, guests, storage, network etc.  It is
-        based on top of
-        the <a href="https://libvirt.org/ruby">native ruby bindings</a>.
-      </dd>
    </dl>

-    <h2><a id="livecd">LiveCD / Appliances</a></h2>
+        <dl>
+            <dt><a href="https://github.com/ohadlevy/virt#readme">Ruby
+            Libvirt Object bindings</a></dt>
+            <dd>
+                Allows using simple ruby objects to manipulate
+                hypervisors, guests, storage, network etc.  It is
+                based on top of
+                the <a href="http://libvirt.org/ruby">native ruby
+                bindings</a>.
+            </dd>
+        </dl>
+    <h2><a name="livecd">LiveCD / Appliances</a></h2>

    <dl>
-      <dt><a href="http://libguestfs.org/virt-v2v/">virt-p2v</a></dt>
+      <dt><a href="http://et.redhat.com/~rjones/virt-p2v/">virt-p2v</a></dt>
      <dd>
        An older tool for converting a physical machine into a virtual
        machine.  It is a LiveCD which is booted on the machine to be
@@ -320,9 +262,9 @@
      </dd>
    </dl>

-    <h2><a id="monitoring">Monitoring</a></h2>
+    <h2><a name="monitoring">Monitoring</a></h2>
    <dl>
-      <dt><a href="https://collectd.org/plugins/libvirt.shtml">collectd</a></dt>
+      <dt><a href="http://collectd.org/plugins/libvirt.shtml">collectd</a></dt>
      <dd>
        The libvirt-plugin is part of <a href="http://collectd.org/">collectd</a>
        and gathers statistics about virtualized guests on a system. This
@@ -331,19 +273,13 @@
        For a full description, please refer to the libvirt section in the
        collectd.conf(5) manual page.
      </dd>
-      <dt><a href="http://www.sflow.net/">Host sFlow</a></dt>
+      <dt><a href="http://honk.sigxcpu.org/projects/libvirt/#munin">Munin</a></dt>
      <dd>
-        Host sFlow is a lightweight agent running on KVM hypervisors that
-        links to libvirt library and exports standardized cpu, memory, network
-        and disk metrics for all virtual machines.
-      </dd>
-      <dt><a href="https://honk.sigxcpu.org/projects/libvirt/#munin">Munin</a></dt>
-      <dd>
-        The plugins provided by Guido Günther allow to monitor various things
+        The plugins provided by Guido G&uuml;nther allow to monitor various things
        like network and block I/O with
        <a href="http://munin.projects.linpro.no/">Munin</a>.
      </dd>
-      <dt><a href="http://people.redhat.com/rjones/nagios-virt/">Nagios-virt</a></dt>
+      <dt><a href="http://et.redhat.com/~rjones/nagios-virt/">Nagios-virt</a></dt>
      <dd>
        Nagios-virt is a configuration tool to add monitoring of your
        virtualised domains to <a href="http://www.nagios.org/">Nagios</a>.
@@ -351,20 +287,18 @@
        your Xen or QEMU/KVM guests, or to integrate with your existing Nagios
        installation.
      </dd>
-      <dt><a href="http://www.pcp.io/man/man1/pmdalibvirt.1.html">PCP</a></dt>
+      <dt><a href="http://community.zenoss.org/docs/DOC-4687">Zenoss</a></dt>
      <dd>
-        The PCP libvirt PMDA (plugin) is part of the
-        <a href="http://pcp.io/">PCP</a> toolkit and provides
-        hypervisor and guest information and complete set of guest performance
-        metrics. It supports pCPU, vCPU, memory, block device, network interface,
-        and performance event metrics for each virtual guest.
+        The Zenoss libvirt Zenpack adds support for monitoring virtualization
+        servers.  It has been tested with KVM, QEMU, VMware ESX, and VMware
+        GSX.
      </dd>
    </dl>

-    <h2><a id="provisioning">Provisioning</a></h2>
+    <h2><a name="provisioning">Provisioning</a></h2>

    <dl>
-      <dt><a href="https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Tivoli+Provisioning+Manager">Tivoli Provisioning Manager</a></dt>
+      <dt><a href="http://www.ibm.com/software/tivoli/products/prov-mgr/">Tivoli Provisioning Manager</a></dt>
      <dd>
        Part of the IBM Tivoli family, Tivoli Provisioning Manager (TPM) is
        an IT lifecycle automation product.  It
@@ -374,7 +308,7 @@
    </dl>

    <dl>
-      <dt><a href="https://theforeman.org">Foreman</a></dt>
+      <dt><a href="http://theforeman.org">Foreman</a></dt>
      <dd>
      Foreman is an open source web based application aimed to be a
      Single Address For All Machines Life Cycle Management. Foreman:
@@ -390,15 +324,14 @@
          <li>Shows you Systems Inventory (based on Facter) and
          provides real time information about hosts status based on
          Puppet reports.</li>
-      </ul>
      </dd>
    </dl>


-    <h2><a id="web">Web applications</a></h2>
+    <h2><a name="web">Web applications</a></h2>

    <dl>
-      <dt><a href="http://www.abiquo.com/">AbiCloud</a></dt>
+      <dt><a href="http://community.abiquo.com/display/AbiCloud">AbiCloud</a></dt>
      <dd>
        AbiCloud is an open source cloud platform manager which allows to
        easily deploy a private cloud in your datacenter. One of the key
@@ -406,74 +339,23 @@
        infrastructure. You can deploy a new service just dragging and
        dropping a VM.
      </dd>
-      <dt><a href="https://kimchi-project.github.io/kimchi/">Kimchi</a></dt>
-      <dd>
-        Kimchi is an HTML5 based management tool for KVM. It is designed to
-        make it as easy as possible to get started with KVM and create your first guest.
-
-        Kimchi manages KVM guests through libvirt. The management interface is accessed
-        over the web using a browser that supports HTML5.
-      </dd>
-      <dt><a href="https://ovirt.org/">oVirt</a></dt>
+      <dt><a href="http://ovirt.org/">oVirt</a></dt>
      <dd>
        oVirt provides the ability to manage large numbers of virtual
        machines across an entire data center of hosts. It integrates
        with FreeIPA for Kerberos authentication, and in the future,
        certificate management.
      </dd>
-      <dt><a href="https://ispsystem.com/en/software/vmmanager">VMmanager</a></dt>
-      <dd>
-        VMmanager is a software solution for virtualization management
-        that can be used both for hosting virtual machines and
-        building a cloud.  VMmanager can manage not only one server,
-        but a large cluster of hypervisors.  It delivers a number of
-        functions, such as live migration that allows for load
-        balancing between cluster nodes, monitoring CPU, memory.
-      </dd>
-      <dt><a href="https://mist.io/">mist.io</a></dt>
-      <dd>
-        Mist.io is an open source project and a service that can assist you in
-        managing your virtual machines on a unified way, providing a simple
-        interface for all of your infrastructure (multiple public cloud
-        providers, OpenStack based public/private clouds, Docker servers, bare
-        metal servers and now KVM hypervisors).
-      </dd>
-      <dt><a href="https://ravada.upc.edu/">Ravada</a></dt>
-      <dd>
-        Ravada is an open source tool for managing Virtual Desktop
-        Infrastructure (VDI). It is very easy to install and use. Following
-        the documentation, you'll be ready to deploy virtual machines in
-        minutes. The only requirements for the users are a Web browser and
-        a lightweight remote viewer.
-      </dd>
-      <dt><a href="https://github.com/cutelyst/Virtlyst">Virtlyst</a></dt>
-      <dd>
-        Virtlyst is an open source web application built with C++11, Cutelyst and Qt.
-        It features:
-        <ul>
-          <li>Low memory usage (around 5 MiB of RAM)</li>
-          <li>Look and feel easily customized with HTML templates that use the Django syntax</li>
-          <li>VNC/Spice console directly in the browser using websockets on the same HTTP port</li>
-          <li>Host and Domain statistics graphs (CPU, Memory, IO, Network)</li>
-          <li>Connect to multiple libvirtd instances (over local Unix domain socket, SSH, TCP and TLS)</li>
-          <li>Manage Storage Pools, Storage Volumes, Networks, Interfaces, and Secrets</li>
-          <li>Create and launch VMs</li>
-          <li>Configure VMs with easy panels or go pro and edit the VM's XML</li>
-        </ul>
-      </dd>
    </dl>

-    <h2><a id="other">Other</a></h2>
+    <h2><a name="mobile">Mobile applications</a></h2>

    <dl>
-      <dt><a href="https://cuckoosandbox.org/">Cuckoo Sandbox</a></dt>
+      <dt><a href="https://market.android.com/details?id=vm.manager">VM Manager</a></dt>
      <dd>
-        Cuckoo Sandbox is a malware analysis system.  You can throw
-        any suspicious file at it and in a matter of seconds Cuckoo
-        will provide you back some detailed results outlining what
-        such file did when executed inside an isolated environment.
-        And libvirt is one of the backends that can be used for the
-        isolated environment.
+        VM Manager is VM (libvirt) manager (over SSH) application. VM Manager
+        is an application for libvirt VM / Domain management over SSH.
+        Please keep in mind that this software is under heavy development.
      </dd>
    </dl>

--- a/docs/archdomain.html.in
+++ b/docs/archdomain.html.in
@@ -0,0 +1,5 @@
+<html>
+  <body>
+    <h1>Domain management architecture</h1>
+  </body>
+</html>
--- a/Show More
+++ b/Show More