2007-03-31 01:00:26 +04:00
/*
* Copyright ( C ) 2001 - 2004 Sistina Software , Inc . All rights reserved .
* Copyright ( C ) 2007 Red Hat , Inc . All rights reserved .
*
* This file is part of LVM2 .
*
* This copyrighted material is made available to anyone wishing to use ,
* modify , copy , or redistribute it subject to the terms and conditions
2007-08-21 00:55:30 +04:00
* of the GNU Lesser General Public License v .2 .1 .
2007-03-31 01:00:26 +04:00
*
2007-08-21 00:55:30 +04:00
* You should have received a copy of the GNU Lesser General Public License
2007-03-31 01:00:26 +04:00
* along with this program ; if not , write to the Free Software Foundation ,
2016-01-21 13:49:46 +03:00
* Inc . , 51 Franklin Street , Fifth Floor , Boston , MA 02110 - 1301 USA
2007-03-31 01:00:26 +04:00
*/
2018-06-08 15:40:53 +03:00
# include "base/memory/zalloc.h"
2007-03-31 01:00:26 +04:00
# include "tools.h"
2019-05-22 22:25:08 +03:00
# include "lib/format_text/format-text.h"
2019-05-31 22:10:44 +03:00
# include "lib/format_text/layout.h"
# include "lib/mm/xlate.h"
# include "lib/misc/crc.h"
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
# include "lib/device/device_id.h"
2019-05-31 22:10:44 +03:00
2020-02-28 21:00:23 +03:00
# define ONE_MB_IN_BYTES 1048576
2019-10-18 01:24:22 +03:00
# define PRINT_CURRENT 1
# define PRINT_ALL 2
2019-10-30 00:08:43 +03:00
# define ID_STR_SIZE 40 /* uuid formatted with dashes is 38 chars */
/*
* command line input from - - settings
*/
2019-10-22 21:28:45 +03:00
struct settings {
2019-10-30 00:08:43 +03:00
uint64_t metadata_offset ; /* bytes, start of text metadata (from start of disk) */
uint64_t mda_offset ; /* bytes, start of mda_header (from start of disk) */
uint64_t mda_size ; /* bytes, size of metadata area (mda_header + text area) */
uint64_t mda2_offset ; /* bytes */
uint64_t mda2_size ; /* bytes */
uint64_t device_size ; /* bytes */
uint64_t data_offset ; /* bytes, start of data (pe_start) */
uint32_t seqno ;
struct id pvid ;
int mda_num ; /* 1 or 2 for first or second mda */
char * backup_file ;
2019-10-22 21:28:45 +03:00
unsigned metadata_offset_set : 1 ;
unsigned mda_offset_set : 1 ;
unsigned mda_size_set : 1 ;
2019-10-30 00:08:43 +03:00
unsigned mda2_offset_set ;
unsigned mda2_size_set ;
unsigned device_size_set : 1 ;
unsigned data_offset_set : 1 ;
unsigned seqno_set : 1 ;
unsigned pvid_set : 1 ;
} ;
/*
* command line input from - - file
*/
struct metadata_file {
const char * filename ;
char * text_buf ;
uint64_t text_size ; /* bytes */
uint32_t text_crc ;
char vgid_str [ ID_STR_SIZE ] ;
2019-10-22 21:28:45 +03:00
} ;
2020-08-29 23:02:41 +03:00
static char * _chars_to_str ( const void * in , void * out , int num , int max , const char * field )
2019-05-31 22:10:44 +03:00
{
2020-08-29 23:02:41 +03:00
const char * i = in ;
2019-05-31 22:10:44 +03:00
char * o = out ;
int n ;
memset ( out , 0 , max ) ;
if ( num > max - 1 ) {
log_print ( " CHECK: abbreviating output for %s " , field ) ;
num = max - 1 ;
}
for ( n = 0 ; n < num ; n + + ) {
if ( isprint ( ( int ) * i ) )
* o = * i ;
else
* o = ' ? ' ;
i + + ;
o + + ;
}
return out ;
}
/*
* This is used to print mda_header . magic as a series of hex values
* since it only contains some printable chars .
*/
2020-08-29 23:02:41 +03:00
static char * _chars_to_hexstr ( const void * in , void * out , int num , int max , const char * field )
2019-05-31 22:10:44 +03:00
{
char * tmp ;
2020-08-29 23:02:41 +03:00
const char * i = in ;
2019-05-31 22:10:44 +03:00
int n ;
int off = 0 ;
int ret ;
if ( ! ( tmp = zalloc ( max ) ) ) {
log_print ( " CHECK: no mem for printing %s " , field ) ;
return out ;
}
memset ( out , 0 , max ) ;
memset ( tmp , 0 , max ) ;
if ( num > max - 1 ) {
log_print ( " CHECK: abbreviating output for %s " , field ) ;
num = max - 1 ;
}
for ( n = 0 ; n < num ; n + + ) {
ret = sprintf ( tmp + off , " %x " , * i & 0xFF ) ;
off + = ret ;
i + + ;
}
memcpy ( out , tmp , 256 ) ;
free ( tmp ) ;
return out ;
}
2019-10-18 01:24:22 +03:00
static int _check_vgname_start ( char * buf , int * len )
{
int chars = 0 ;
int space = 0 ;
int i ;
char c ;
/*
* Valid metadata begins : ' vgname { '
*/
for ( i = 0 ; i < = NAME_LEN + 2 ; i + + ) {
c = buf [ i ] ;
if ( isalnum ( c ) | | c = = ' . ' | | c = = ' _ ' | | c = = ' - ' | | c = = ' + ' ) {
if ( space )
return 0 ;
chars + + ;
continue ;
}
if ( c = = ' ' ) {
if ( ! chars | | space )
return 0 ;
space + + ;
continue ;
}
if ( c = = ' { ' ) {
if ( chars & & space ) {
* len = chars ;
return 1 ;
}
return 0 ;
}
return 0 ;
}
return 0 ;
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2019-10-18 01:24:22 +03:00
static void _copy_out_metadata ( char * buf , uint32_t start , uint32_t first_start , uint64_t mda_size , char * * meta_buf , uint64_t * meta_size , int * bad_end )
{
char * new_buf ;
uint64_t i ;
uint64_t new_len ;
uint64_t len_a = 0 , len_b = 0 ;
uint32_t stop ;
int found_end ;
/*
* If we wrap around the buffer searching for the
* end of some metadata , either stop when we reach
* where we began ( start ) , or stop where we found
* the first copy of metadata ( first_start ) .
*/
if ( ! first_start )
stop = start ;
else
stop = first_start ;
found_end = 0 ;
for ( i = start ; i < mda_size ; i + + ) {
if ( buf [ i ] = = ' \0 ' ) {
found_end = 1 ;
break ;
}
}
if ( found_end ) {
new_len = i - start ;
} else {
len_a = i - start ;
found_end = 0 ;
for ( i = 512 ; i < stop ; i + + ) {
if ( buf [ i ] = = ' \0 ' ) {
found_end = 1 ;
break ;
}
}
if ( ! found_end )
return ;
len_b = i - 512 ;
new_len = len_a + len_b ;
}
if ( new_len < 256 ) {
log_print ( " skip invalid metadata with len %llu at %llu " ,
( unsigned long long ) new_len , ( unsigned long long ) start ) ;
return ;
}
/* terminating 0 byte */
new_len + + ;
2019-11-27 20:17:15 +03:00
if ( ! ( new_buf = zalloc ( new_len ) ) )
2019-10-18 01:24:22 +03:00
return ;
if ( len_a ) {
memcpy ( new_buf , buf + start , len_a ) ;
memcpy ( new_buf + len_a , buf + 512 , len_b ) ;
} else {
memcpy ( new_buf , buf + start , new_len ) ;
}
/* \0 should be preceded by \n\n (0x0a0a) */
if ( new_buf [ new_len - 1 ] ! = 0 | | new_buf [ new_len - 2 ] ! = 0x0a | | new_buf [ new_len - 3 ] ! = 0x0a )
* bad_end = 1 ;
* meta_buf = new_buf ;
* meta_size = new_len ;
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
static int _text_buf_parse ( char * text_buf , uint64_t text_size , struct dm_config_tree * * cft_out )
2019-10-18 01:24:22 +03:00
{
struct dm_config_tree * cft ;
2019-10-30 00:08:43 +03:00
* cft_out = NULL ;
2019-10-18 01:24:22 +03:00
if ( ! ( cft = config_open ( CONFIG_FILE_SPECIAL , NULL , 0 ) ) ) {
return 0 ;
}
2020-03-04 20:32:13 +03:00
if ( ! dm_config_parse_without_dup_node_check ( cft , text_buf , text_buf + text_size ) ) {
2019-10-18 01:24:22 +03:00
config_destroy ( cft ) ;
return 0 ;
}
2019-10-30 00:08:43 +03:00
* cft_out = cft ;
return 1 ;
}
/* all sizes and offsets in bytes */
static int _text_buf_parsable ( char * text_buf , uint64_t text_size )
{
struct dm_config_tree * cft = NULL ;
if ( ! _text_buf_parse ( text_buf , text_size , & cft ) )
return 0 ;
2019-10-18 01:24:22 +03:00
config_destroy ( cft ) ;
return 1 ;
}
# define MAX_LINE_CHECK 128
2020-02-28 20:24:28 +03:00
# define MAX_DESC 1024
char desc_line [ MAX_DESC ] ;
2019-10-30 00:08:43 +03:00
static void _copy_line ( char * in , char * out , int * len , int linesize )
2019-10-18 01:24:22 +03:00
{
int i ;
* len = 0 ;
2019-10-30 00:08:43 +03:00
for ( i = 0 ; i < linesize ; i + + ) {
out [ i ] = in [ i ] ;
2019-10-18 01:24:22 +03:00
if ( ( in [ i ] = = ' \n ' ) | | ( in [ i ] = = ' \0 ' ) )
break ;
}
* len = i + 1 ;
}
2020-02-28 21:00:23 +03:00
static uint64_t mda2_offset_from_size ( struct device * dev , uint64_t mda2_size )
{
uint64_t dev_sectors = 0 ;
uint64_t dev_bytes ;
uint64_t extra_bytes ;
uint64_t mda2_offset ;
if ( dev_get_size ( dev , & dev_sectors ) )
stack ;
dev_bytes = dev_sectors * 512 ;
extra_bytes = dev_bytes % ONE_MB_IN_BYTES ;
if ( dev_bytes < ( 2 * ONE_MB_IN_BYTES ) )
return_0 ;
mda2_offset = dev_bytes - extra_bytes - mda2_size ;
return mda2_offset ;
}
static uint64_t mda2_size_from_offset ( struct device * dev , uint64_t mda2_offset )
{
uint64_t dev_sectors = 0 ;
uint64_t dev_bytes ;
uint64_t extra_bytes ;
uint64_t mda2_size ;
if ( dev_get_size ( dev , & dev_sectors ) )
stack ;
dev_bytes = dev_sectors * 512 ;
extra_bytes = dev_bytes % ONE_MB_IN_BYTES ;
if ( dev_bytes < ( 2 * ONE_MB_IN_BYTES ) )
return_0 ;
mda2_size = dev_bytes - extra_bytes - mda2_offset ;
return mda2_size ;
}
2020-03-03 01:26:44 +03:00
struct devicefile {
char path [ PATH_MAX ] ;
int fd ;
} ;
static struct devicefile * get_devicefile ( const char * path )
{
struct stat sb ;
struct devicefile * def ;
if ( stat ( path , & sb ) )
return_NULL ;
if ( ( sb . st_mode & S_IFMT ) ! = S_IFREG )
return_NULL ;
if ( ! ( def = malloc ( sizeof ( struct devicefile ) ) ) )
return_NULL ;
if ( dm_snprintf ( def - > path , PATH_MAX , " %s " , path ) < 0 ) {
free ( def ) ;
return_NULL ;
}
if ( ( def - > fd = open ( path , O_RDONLY ) ) < 0 ) {
free ( def ) ;
return_NULL ;
}
return def ;
}
static bool _read_bytes ( struct device * dev , struct devicefile * def , uint64_t start , size_t len , void * data )
{
off_t off ;
ssize_t rv ;
if ( dev )
return dev_read_bytes ( dev , start , len , data ) ;
off = lseek ( def - > fd , start , SEEK_SET ) ;
if ( off ! = start )
return false ;
rv = read ( def - > fd , data , len ) ;
if ( rv < 0 )
return false ;
if ( rv ! = len )
return false ;
return true ;
}
2020-02-28 21:00:23 +03:00
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2020-03-03 01:26:44 +03:00
static int _dump_all_text ( struct cmd_context * cmd , struct settings * set , const char * tofile ,
struct device * dev , struct devicefile * def ,
2019-10-18 01:24:22 +03:00
int mda_num , uint64_t mda_offset , uint64_t mda_size , char * buf )
{
FILE * fp = NULL ;
char line [ MAX_LINE_CHECK ] ;
char vgname [ NAME_LEN + 1 ] ;
char id_str [ ID_STR_SIZE ] ;
char id_first [ ID_STR_SIZE ] ;
2019-12-02 20:16:02 +03:00
char * text_buf = NULL ;
2019-10-18 01:24:22 +03:00
char * p ;
2019-10-30 00:08:43 +03:00
uint32_t buf_off ; /* offset with buf which begins with mda_header, bytes */
2019-10-18 01:24:22 +03:00
uint32_t buf_off_first = 0 ;
uint32_t seqno ;
uint32_t crc ;
2019-10-30 00:08:43 +03:00
uint64_t text_size ; /* bytes */
uint64_t meta_size ; /* bytes */
int print_count = 0 ;
int one_found = 0 ;
2019-10-18 01:24:22 +03:00
int multiple_vgs = 0 ;
int bad_end ;
int vgnamelen ;
int count ;
int len ;
if ( tofile ) {
if ( ! ( fp = fopen ( tofile , " wx " ) ) ) {
log_error ( " Failed to create file %s " , tofile ) ;
return 0 ;
}
}
/*
* If metadata has not wrapped , and the metadata area beginning
* has not been damaged , the text area will begin with vgname { .
* Wrapping or damage would mean we find no metadata starting at
* the start of the area .
*
* Try looking at each 512 byte offset within the area for the start
* of another copy of metadata . Metadata copies have begun at 512
* aligned offsets since very early lvm2 code in 2002.
*
* ( We could also search for something definitive like
* " # Generated by LVM2 " in the area , and then work backward to find
* a likely beginning . )
*
* N . B . This relies on VG metadata first having the id = " ... " field
* followed by the " seqno = N " field .
*/
memset ( id_first , 0 , sizeof ( id_str ) ) ;
/*
* A count of 512 byte chunks within the metadata area .
*/
count = 0 ;
meta_size = mda_size - 512 ;
/*
* Search 512 byte boundaries for the start of new metadata copies .
*/
while ( count < ( meta_size / 512 ) ) {
memset ( vgname , 0 , sizeof ( vgname ) ) ;
memset ( id_str , 0 , sizeof ( id_str ) ) ;
seqno = 0 ;
vgnamelen = 0 ;
text_size = 0 ;
bad_end = 0 ;
2019-10-30 00:08:43 +03:00
if ( one_found )
break ;
2019-10-18 01:24:22 +03:00
/*
* Check for a new metadata copy at each 512 offset
* ( after skipping 512 bytes for mda_header at the
* start of the buf ) .
*
* If a line looks like it begins with a vgname
* it could be a new copy of metadata , but it could
* also be a random bit of metadata that looks like
* a vgname , so confirm it ' s the start of metadata
* by looking for id and seqno lines following the
* possible vgname .
*/
buf_off = 512 + ( count * 512 ) ;
p = buf + buf_off ;
2019-10-22 21:28:45 +03:00
/*
* user specified metadata in one location
*/
if ( set - > metadata_offset_set & & ( set - > metadata_offset ! = ( mda_offset + buf_off ) ) ) {
count + + ;
continue ;
}
2019-10-30 00:08:43 +03:00
if ( set - > metadata_offset_set )
one_found = 1 ;
2019-10-22 21:28:45 +03:00
2019-10-18 01:24:22 +03:00
/*
* copy line of possible metadata to check for vgname
*/
memset ( line , 0 , sizeof ( line ) ) ;
2020-02-28 20:20:27 +03:00
_copy_line ( p , line , & len , sizeof ( line ) - 1 ) ;
2019-10-18 01:24:22 +03:00
p + = len ;
if ( ! _check_vgname_start ( line , & vgnamelen ) ) {
count + + ;
continue ;
}
memcpy ( vgname , line , vgnamelen ) ;
/*
* copy next line of metadata , which should contain id
*/
memset ( line , 0 , sizeof ( line ) ) ;
2020-02-28 20:20:27 +03:00
_copy_line ( p , line , & len , sizeof ( line ) - 1 ) ;
2019-10-18 01:24:22 +03:00
p + = len ;
if ( strncmp ( line , " id = " , 5 ) ) {
count + + ;
continue ;
}
memcpy ( id_str , line + 6 , 38 ) ;
/*
* copy next line of metadata , which should contain seqno
*/
memset ( line , 0 , sizeof ( line ) ) ;
2020-02-28 20:20:27 +03:00
_copy_line ( p , line , & len , sizeof ( line ) - 1 ) ;
2019-10-18 01:24:22 +03:00
p + = len ;
if ( strncmp ( line , " seqno = " , 8 ) ) {
count + + ;
continue ;
}
2019-10-30 00:08:43 +03:00
if ( sscanf ( line , " seqno = %u " , & seqno ) ! = 1 ) {
count + + ;
continue ;
}
2019-10-18 01:24:22 +03:00
2019-10-30 00:08:43 +03:00
/*
* user specified metadata with one seqno
* ( this is not good practice since multiple old copies of metadata
* can have the same seqno ; this is mostly to simplify testing )
*/
if ( set - > seqno_set & & ( set - > seqno ! = seqno ) ) {
count + + ;
continue ;
}
if ( set - > seqno_set )
one_found = 1 ;
2019-10-18 01:24:22 +03:00
/*
* The first three lines look like metadata with
* vgname / id / seqno , so copy out the full metadata .
*
* If this reaches the end of buf without reaching the
* end marker of metadata , it will wrap around to the
* start of buf and continue copying until it reaches
* a NL or until it reaches buf_off_first ( which is
* where we ' ve already taken text from . )
*/
_copy_out_metadata ( buf , buf_off , buf_off_first , mda_size , & text_buf , & text_size , & bad_end ) ;
if ( ! text_buf ) {
log_warn ( " Failed to extract full metadata text at %llu, skipping. " ,
( unsigned long long ) ( mda_offset + buf_off ) ) ;
count + + ;
continue ;
}
/*
* check if it ' s finding metadata from different vgs
*/
if ( ! id_first [ 0 ] )
memcpy ( id_first , id_str , sizeof ( id_first ) ) ;
else if ( memcmp ( id_first , id_str , sizeof ( id_first ) ) )
multiple_vgs = 1 ;
crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) text_buf , text_size ) ;
log_print ( " metadata at %llu length %llu crc %08x vg %s seqno %u id %s " ,
( unsigned long long ) ( mda_offset + buf_off ) ,
( unsigned long long ) text_size ,
crc , vgname , seqno , id_str ) ;
/*
* save the location of the first metadata we ' ve found so
* we know where to stop after wrapping buf .
*/
if ( ! buf_off_first )
buf_off_first = buf_off ;
/*
* check if the full metadata is parsable
*/
if ( ! _text_buf_parsable ( text_buf , text_size ) )
log_warn ( " WARNING: parse error for metadata at %llu " , ( unsigned long long ) ( mda_offset + buf_off ) ) ;
if ( bad_end )
2019-10-30 00:08:43 +03:00
log_warn ( " WARNING: unexpected terminating bytes for metadata at %llu " , ( unsigned long long ) ( mda_offset + buf_off ) ) ;
2019-10-18 01:24:22 +03:00
if ( arg_is_set ( cmd , verbose_ARG ) ) {
char * str1 , * str2 ;
if ( ( str1 = strstr ( text_buf , " description = " ) ) ) {
2020-02-28 20:24:28 +03:00
memset ( desc_line , 0 , sizeof ( desc_line ) ) ;
_copy_line ( str1 , desc_line , & len , sizeof ( desc_line ) - 1 ) ;
if ( ( p = strchr ( desc_line , ' \n ' ) ) )
2019-10-30 00:08:43 +03:00
* p = ' \0 ' ;
2020-02-28 20:24:28 +03:00
log_print ( " %s " , desc_line ) ;
2019-11-14 21:31:28 +03:00
}
2019-11-04 20:32:23 +03:00
if ( str1 & & ( str2 = strstr ( str1 , " creation_time = " ) ) ) {
2020-02-28 20:24:28 +03:00
memset ( desc_line , 0 , sizeof ( desc_line ) ) ;
_copy_line ( str2 , desc_line , & len , sizeof ( desc_line ) - 1 ) ;
if ( ( p = strchr ( desc_line , ' \n ' ) ) )
2019-10-30 00:08:43 +03:00
* p = ' \0 ' ;
2020-02-28 20:24:28 +03:00
log_print ( " %s \n " , desc_line ) ;
2019-10-18 01:24:22 +03:00
}
}
if ( fp ) {
2019-10-30 00:08:43 +03:00
if ( print_count + + )
2019-10-22 21:28:45 +03:00
fprintf ( fp , " \n -- \n " ) ;
2019-10-30 00:08:43 +03:00
fprintf ( fp , " %s " , text_buf ) ;
2019-10-18 01:24:22 +03:00
}
free ( text_buf ) ;
text_buf = NULL ;
if ( text_size < 512 )
count + + ;
else if ( ! ( text_size % 512 ) )
count + = ( text_size / 512 ) ;
else
count + = ( ( text_size / 512 ) + 1 ) ;
}
if ( multiple_vgs )
log_warn ( " WARNING: metadata from multiple VGs was found. " ) ;
if ( fp ) {
if ( fflush ( fp ) )
stack ;
if ( fclose ( fp ) )
stack ;
}
return 1 ;
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2019-06-06 00:23:23 +03:00
static int _check_label_header ( struct label_header * lh , uint64_t labelsector ,
int * found_label )
2019-05-31 22:10:44 +03:00
{
uint32_t crc ;
2019-06-06 00:23:23 +03:00
int good_id = 1 , good_type = 1 ;
2019-05-31 22:10:44 +03:00
int bad = 0 ;
if ( memcmp ( lh - > id , LABEL_ID , sizeof ( lh - > id ) ) ) {
log_print ( " CHECK: label_header.id expected %s " , LABEL_ID ) ;
2019-06-06 00:23:23 +03:00
good_id = 0 ;
2019-05-31 22:10:44 +03:00
bad + + ;
}
if ( xlate64 ( lh - > sector_xl ) ! = labelsector ) {
log_print ( " CHECK: label_header.sector expected %d " , ( int ) labelsector ) ;
bad + + ;
}
crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) & lh - > offset_xl ,
LABEL_SIZE - ( ( uint8_t * ) & lh - > offset_xl - ( uint8_t * ) lh ) ) ;
2019-10-30 00:08:43 +03:00
2019-05-31 22:10:44 +03:00
if ( crc ! = xlate32 ( lh - > crc_xl ) ) {
log_print ( " CHECK: label_header.crc expected 0x%x " , crc ) ;
bad + + ;
}
if ( xlate32 ( lh - > offset_xl ) ! = 32 ) {
log_print ( " CHECK: label_header.offset expected 32 " ) ;
bad + + ;
}
if ( memcmp ( lh - > type , LVM2_LABEL , sizeof ( lh - > type ) ) ) {
log_print ( " CHECK: label_header.type expected %s " , LVM2_LABEL ) ;
2019-06-06 00:23:23 +03:00
good_type = 0 ;
2019-05-31 22:10:44 +03:00
bad + + ;
}
2019-06-06 00:23:23 +03:00
/* Report a label is found if at least id and type are correct. */
if ( found_label & & good_id & & good_type )
* found_label = 1 ;
2019-05-31 22:10:44 +03:00
if ( bad )
return 0 ;
return 1 ;
}
static int _check_pv_header ( struct pv_header * ph )
{
struct id id ;
int bad = 0 ;
if ( ! id_read_format_try ( & id , ( char * ) & ph - > pv_uuid ) ) {
log_print ( " CHECK: pv_header.pv_uuid invalid format " ) ;
bad + + ;
}
if ( bad )
return 0 ;
return 1 ;
}
/*
2019-10-30 00:08:43 +03:00
* all sizes and offsets in bytes
*
2019-05-31 22:10:44 +03:00
* mda_offset / mda_size are from the pv_header / disk_locn and could
* be incorrect .
*/
2019-06-06 00:23:23 +03:00
static int _check_mda_header ( struct mda_header * mh , int mda_num , uint64_t mda_offset , uint64_t mda_size , int * found_header )
2019-05-31 22:10:44 +03:00
{
char str [ 256 ] ;
uint32_t crc ;
2019-06-06 00:23:23 +03:00
int good_magic = 1 ;
2019-05-31 22:10:44 +03:00
int bad = 0 ;
crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) mh - > magic ,
MDA_HEADER_SIZE - sizeof ( mh - > checksum_xl ) ) ;
if ( crc ! = xlate32 ( mh - > checksum_xl ) ) {
log_print ( " CHECK: mda_header_%d.checksum expected 0x%x " , mda_num , crc ) ;
bad + + ;
}
if ( memcmp ( mh - > magic , FMTT_MAGIC , sizeof ( mh - > magic ) ) ) {
2020-08-29 23:02:41 +03:00
log_print ( " CHECK: mda_header_%d.magic expected 0x%s " , mda_num , _chars_to_hexstr ( ( const void * ) & FMTT_MAGIC , str , 16 , 256 , " mda_header.magic " ) ) ;
2019-06-06 00:23:23 +03:00
good_magic = 0 ;
2019-05-31 22:10:44 +03:00
bad + + ;
}
if ( xlate32 ( mh - > version ) ! = FMTT_VERSION ) {
log_print ( " CHECK: mda_header_%d.version expected %u " , mda_num , FMTT_VERSION ) ;
bad + + ;
}
if ( xlate64 ( mh - > start ) ! = mda_offset ) {
log_print ( " CHECK: mda_header_%d.start does not match pv_header.disk_locn.offset %llu " , mda_num , ( unsigned long long ) mda_offset ) ;
bad + + ;
}
if ( xlate64 ( mh - > size ) ! = mda_size ) {
log_print ( " CHECK: mda_header_%d.size does not match pv_header.disk_locn.size %llu " , mda_num , ( unsigned long long ) mda_size ) ;
bad + + ;
}
2019-06-06 00:23:23 +03:00
/* Report a header is found if at least magic is correct. */
if ( found_header & & good_magic )
* found_header = 1 ;
2019-05-31 22:10:44 +03:00
if ( bad )
return 0 ;
return 1 ;
}
2019-05-22 22:25:08 +03:00
/*
2019-10-30 00:08:43 +03:00
* all sizes and offsets in bytes
2019-05-22 22:25:08 +03:00
*
2019-05-31 22:10:44 +03:00
* mda_offset , mda_size are from pv_header . disk_locn
* ( the location of the metadata area . )
*
* meta_offset , meta_size , meta_checksum are from mda_header . raw_locn
* ( the location of the metadata text in the metadata area . )
2019-05-22 22:25:08 +03:00
*/
2020-03-03 01:26:44 +03:00
static int _dump_raw_locn ( struct device * dev , struct devicefile * def , int print_fields ,
2019-05-31 22:10:44 +03:00
struct raw_locn * rlocn , int rlocn_index , uint64_t rlocn_offset ,
int mda_num , uint64_t mda_offset , uint64_t mda_size ,
uint64_t * meta_offset_ret ,
uint64_t * meta_size_ret ,
uint32_t * meta_checksum_ret )
{
uint64_t meta_offset , meta_size ;
uint32_t meta_checksum ;
uint32_t meta_flags ;
int bad = 0 ;
int mn = mda_num ; /* 1 or 2 */
int ri = rlocn_index ; /* 0 or 1 */
int wrapped = 0 ;
meta_offset = xlate64 ( rlocn - > offset ) ;
meta_size = xlate64 ( rlocn - > size ) ;
meta_checksum = xlate32 ( rlocn - > checksum ) ;
meta_flags = xlate32 ( rlocn - > flags ) ;
if ( meta_offset + meta_size > mda_size )
wrapped = 1 ;
if ( print_fields ) {
log_print ( " mda_header_%d.raw_locn[%d] at %llu # %s%s " , mn , ri , ( unsigned long long ) rlocn_offset , ( ri = = 0 ) ? " commit " : " precommit " , wrapped ? " wrapped " : " " ) ;
log_print ( " mda_header_%d.raw_locn[%d].offset %llu " , mn , ri , ( unsigned long long ) meta_offset ) ;
log_print ( " mda_header_%d.raw_locn[%d].size %llu " , mn , ri , ( unsigned long long ) meta_size ) ;
log_print ( " mda_header_%d.raw_locn[%d].checksum 0x%x " , mn , ri , meta_checksum ) ;
if ( meta_flags & RAW_LOCN_IGNORED )
log_print ( " mda_header_%d.raw_locn[%d].flags 0x%x # RAW_LOCN_IGNORED " , mn , ri , meta_flags ) ;
else
log_print ( " mda_header_%d.raw_locn[%d].flags 0x%x " , mn , ri , meta_flags ) ;
}
/* The precommit pointer will usually be empty. */
if ( ( rlocn_index = = 1 ) & & meta_offset )
log_print ( " CHECK: mda_header_%d.raw_locn[%d] for precommit not empty " , mn , ri ) ;
/* This metadata area is not being used to hold text metadata. */
/* Old, out of date text metadata may exist if the area was once used. */
if ( meta_flags & RAW_LOCN_IGNORED )
return 1 ;
/*
* A valid meta_size can be no larger than the metadata area size minus
* the 512 bytes used by the mda_header sector .
*/
if ( meta_size > ( mda_size - 512 ) ) {
log_print ( " CHECK: mda_header_%d.raw_locn[%d].size larger than metadata area size " , mn , ri ) ;
/* If meta_size is bad, try to continue using a reasonable value */
meta_size = ( mda_size - 512 ) ;
}
if ( meta_offset_ret )
* meta_offset_ret = meta_offset ;
if ( meta_size_ret )
* meta_size_ret = meta_size ;
if ( meta_checksum_ret )
* meta_checksum_ret = meta_checksum ;
/* No text metadata exists in this metadata area. */
if ( ! meta_offset )
return 1 ;
if ( bad )
return 0 ;
return 1 ;
}
2020-03-03 01:26:44 +03:00
static int _dump_meta_area ( struct device * dev , struct devicefile * def , const char * tofile ,
2019-05-31 22:10:44 +03:00
uint64_t mda_offset , uint64_t mda_size )
{
FILE * fp ;
char * meta_buf ;
2020-09-01 22:14:39 +03:00
int ret = 1 ;
2019-05-31 22:10:44 +03:00
if ( ! tofile )
return_0 ;
2019-11-27 20:17:15 +03:00
if ( ! ( meta_buf = zalloc ( mda_size ) ) )
2019-05-31 22:10:44 +03:00
return_0 ;
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , mda_offset , mda_size , meta_buf ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to read metadata area at offset %llu size %llu " ,
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2019-05-31 22:10:44 +03:00
return 0 ;
}
if ( ! ( fp = fopen ( tofile , " wx " ) ) ) {
2019-11-14 21:31:29 +03:00
log_error ( " Failed to create file %s " , tofile ) ;
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2019-05-31 22:10:44 +03:00
return 0 ;
}
2020-09-01 22:14:39 +03:00
if ( fwrite ( meta_buf , mda_size - 512 , 1 , fp ) ! = 1 ) {
log_error ( " Failed to write file %s metadata area size %llu. " ,
tofile , ( unsigned long long ) mda_size ) ;
ret = 0 ;
}
2019-05-31 22:10:44 +03:00
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2019-05-31 22:10:44 +03:00
if ( fflush ( fp ) )
stack ;
if ( fclose ( fp ) )
stack ;
2020-09-01 22:14:39 +03:00
return ret ;
2019-05-31 22:10:44 +03:00
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2020-03-03 01:26:44 +03:00
static int _dump_current_text ( struct device * dev , struct devicefile * def ,
2019-10-18 01:24:22 +03:00
int print_fields , int print_metadata , const char * tofile ,
int mda_num , int rlocn_index ,
uint64_t mda_offset , uint64_t mda_size ,
uint64_t meta_offset , uint64_t meta_size ,
uint32_t meta_checksum )
2019-05-31 22:10:44 +03:00
{
char * meta_buf ;
struct dm_config_tree * cft ;
2020-01-29 18:55:49 +03:00
char * vgname = NULL ;
2019-05-31 22:10:44 +03:00
uint32_t crc ;
2019-06-05 19:10:37 +03:00
uint32_t seqno = 0 ;
2019-05-31 22:10:44 +03:00
int mn = mda_num ; /* 1 or 2 */
int ri = rlocn_index ; /* 0 or 1 */
int bad = 0 ;
2019-10-30 00:08:43 +03:00
if ( ! ( meta_buf = zalloc ( meta_size ) ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: mda_header_%d.raw_locn[%d] no mem for metadata text size %llu " , mn , ri ,
( unsigned long long ) meta_size ) ;
return 0 ;
}
/*
* Read the metadata text specified by the raw_locn so we can
* check the raw_locn values .
*
* meta_offset is the offset from the start of the mda_header ,
* so the text location from the start of the disk is
* mda_offset + meta_offset .
*/
if ( meta_offset + meta_size > mda_size ) {
2019-10-30 00:08:43 +03:00
/* text metadata wraps to start of text metadata area */
2019-05-31 22:10:44 +03:00
uint32_t wrap = ( uint32_t ) ( ( meta_offset + meta_size ) - mda_size ) ;
off_t offset_a = mda_offset + meta_offset ;
uint32_t size_a = meta_size - wrap ;
off_t offset_b = mda_offset + 512 ; /* continues after mda_header sector */
uint32_t size_b = wrap ;
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , offset_a , size_a , meta_buf ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to read metadata text at mda_header_%d.raw_locn[%d].offset %llu size %llu part_a %llu %llu " , mn , ri ,
( unsigned long long ) meta_offset , ( unsigned long long ) meta_size ,
( unsigned long long ) offset_a , ( unsigned long long ) size_a ) ;
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2019-05-31 22:10:44 +03:00
return 0 ;
}
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , offset_b , size_b , meta_buf + size_a ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to read metadata text at mda_header_%d.raw_locn[%d].offset %llu size %llu part_b %llu %llu " , mn , ri ,
( unsigned long long ) meta_offset , ( unsigned long long ) meta_size ,
( unsigned long long ) offset_b , ( unsigned long long ) size_b ) ;
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2019-05-31 22:10:44 +03:00
return 0 ;
}
} else {
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , mda_offset + meta_offset , meta_size , meta_buf ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to read metadata text at mda_header_%d.raw_locn[%d].offset %llu size %llu " , mn , ri ,
( unsigned long long ) meta_offset , ( unsigned long long ) meta_size ) ;
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2019-05-31 22:10:44 +03:00
return 0 ;
}
}
crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) meta_buf , meta_size ) ;
if ( crc ! = meta_checksum ) {
log_print ( " CHECK: metadata text at %llu crc does not match mda_header_%d.raw_locn[%d].checksum " ,
( unsigned long long ) ( mda_offset + meta_offset ) , mn , ri ) ;
bad + + ;
}
if ( ! ( cft = config_open ( CONFIG_FILE_SPECIAL , NULL , 0 ) ) ) {
log_print ( " CHECK: failed to set up metadata parsing " ) ;
bad + + ;
} else {
2020-03-04 20:32:13 +03:00
if ( ! dm_config_parse_without_dup_node_check ( cft , meta_buf , meta_buf + meta_size ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to parse metadata text at %llu size %llu " ,
( unsigned long long ) ( mda_offset + meta_offset ) ,
( unsigned long long ) meta_size ) ;
bad + + ;
} else {
2019-06-05 19:10:37 +03:00
if ( cft - > root & & cft - > root - > key )
vgname = strdup ( cft - > root - > key ) ;
if ( cft - > root & & cft - > root - > child )
dm_config_get_uint32 ( cft - > root - > child , " seqno " , & seqno ) ;
2019-05-31 22:10:44 +03:00
}
config_destroy ( cft ) ;
}
2019-06-06 00:23:23 +03:00
if ( print_fields | | print_metadata )
log_print ( " metadata text at %llu crc 0x%x # vgname %s seqno %u " ,
( unsigned long long ) ( mda_offset + meta_offset ) , crc ,
vgname ? vgname : " ? " , seqno ) ;
2019-05-31 22:10:44 +03:00
if ( ! print_metadata )
goto out ;
if ( ! tofile ) {
log_print ( " --- " ) ;
printf ( " %s \n " , meta_buf ) ;
log_print ( " --- " ) ;
} else {
FILE * fp ;
if ( ! ( fp = fopen ( tofile , " wx " ) ) ) {
log_error ( " Failed to create file %s " , tofile ) ;
goto out ;
}
fprintf ( fp , " %s " , meta_buf ) ;
if ( fflush ( fp ) )
stack ;
if ( fclose ( fp ) )
stack ;
}
out :
2019-10-30 00:08:43 +03:00
free ( meta_buf ) ;
2020-01-29 18:55:49 +03:00
free ( vgname ) ;
2019-11-14 21:31:29 +03:00
if ( bad )
return 0 ;
return 1 ;
2019-05-31 22:10:44 +03:00
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2020-03-03 01:26:44 +03:00
static int _dump_label_and_pv_header ( struct cmd_context * cmd , uint64_t labelsector ,
struct device * dev , struct devicefile * def ,
2019-10-22 00:39:46 +03:00
int print_fields ,
2019-06-06 00:23:23 +03:00
int * found_label ,
2019-05-31 22:10:44 +03:00
uint64_t * mda1_offset , uint64_t * mda1_size ,
2019-10-01 00:20:17 +03:00
uint64_t * mda2_offset , uint64_t * mda2_size ,
int * mda_count_out )
2019-05-31 22:10:44 +03:00
{
2019-10-30 00:08:43 +03:00
char buf [ 512 ] ;
2019-05-31 22:10:44 +03:00
char str [ 256 ] ;
struct label_header * lh ;
struct pv_header * pvh ;
struct pv_header_extension * pvhe ;
struct disk_locn * dlocn ;
2019-10-30 00:08:43 +03:00
uint64_t lh_offset ; /* bytes */
uint64_t pvh_offset ; /* bytes */
uint64_t pvhe_offset ; /* bytes */
uint64_t dlocn_offset ; /* bytes */
2019-05-31 22:10:44 +03:00
uint64_t tmp ;
int mda_count = 0 ;
int bad = 0 ;
int di ;
lh_offset = labelsector * 512 ; /* from start of disk */
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , lh_offset , 512 , buf ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to read label_header at %llu " ,
( unsigned long long ) lh_offset ) ;
return 0 ;
}
lh = ( struct label_header * ) buf ;
if ( print_fields ) {
log_print ( " label_header at %llu " , ( unsigned long long ) lh_offset ) ;
log_print ( " label_header.id %s " , _chars_to_str ( lh - > id , str , 8 , 256 , " label_header.id " ) ) ;
log_print ( " label_header.sector %llu " , ( unsigned long long ) xlate64 ( lh - > sector_xl ) ) ;
log_print ( " label_header.crc 0x%x " , xlate32 ( lh - > crc_xl ) ) ;
log_print ( " label_header.offset %u " , xlate32 ( lh - > offset_xl ) ) ;
log_print ( " label_header.type %s " , _chars_to_str ( lh - > type , str , 8 , 256 , " label_header.type " ) ) ;
}
2019-06-06 00:23:23 +03:00
if ( ! _check_label_header ( lh , labelsector , found_label ) )
2019-05-31 22:10:44 +03:00
bad + + ;
/*
* The label_header is 32 bytes in size ( size of struct label_header ) .
* The pv_header should begin immediately after the label_header .
* The label_header . offset gives the offset of pv_header from the
* start of the label_header , which should always be 32.
*
* If label_header . offset is corrupted , then we should print a
* warning about the bad value , and read the pv_header from the
* correct location instead of the bogus location .
*/
pvh = ( struct pv_header * ) ( buf + 32 ) ;
pvh_offset = lh_offset + 32 ; /* from start of disk */
/* sanity check */
if ( ( void * ) pvh ! = ( void * ) ( buf + pvh_offset - lh_offset ) )
log_print ( " CHECK: problem with pv_header offset calculation " ) ;
if ( print_fields ) {
log_print ( " pv_header at %llu " , ( unsigned long long ) pvh_offset ) ;
log_print ( " pv_header.pv_uuid %s " , _chars_to_str ( pvh - > pv_uuid , str , ID_LEN , 256 , " pv_header.pv_uuid " ) ) ;
log_print ( " pv_header.device_size %llu " , ( unsigned long long ) xlate64 ( pvh - > device_size_xl ) ) ;
}
if ( ! _check_pv_header ( pvh ) )
bad + + ;
/*
* The pv_header is 40 bytes , excluding disk_locn ' s .
* disk_locn structs immediately follow the pv_header .
* Each disk_locn is 16 bytes .
*/
di = 0 ;
dlocn = pvh - > disk_areas_xl ;
dlocn_offset = pvh_offset + 40 ; /* from start of disk */
/* sanity check */
if ( ( void * ) dlocn ! = ( void * ) ( buf + dlocn_offset - lh_offset ) )
log_print ( " CHECK: problem with pv_header.disk_locn[%d] offset calculation " , di ) ;
while ( ( tmp = xlate64 ( dlocn - > offset ) ) ) {
if ( print_fields ) {
log_print ( " pv_header.disk_locn[%d] at %llu # location of data area " , di ,
( unsigned long long ) dlocn_offset ) ;
log_print ( " pv_header.disk_locn[%d].offset %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > offset ) ) ;
log_print ( " pv_header.disk_locn[%d].size %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > size ) ) ;
}
di + + ;
dlocn + + ;
dlocn_offset + = 16 ;
}
/* all-zero dlocn struct is area list end */
if ( print_fields ) {
log_print ( " pv_header.disk_locn[%d] at %llu # location list end " , di ,
( unsigned long long ) dlocn_offset ) ;
log_print ( " pv_header.disk_locn[%d].offset %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > offset ) ) ;
log_print ( " pv_header.disk_locn[%d].size %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > size ) ) ;
}
/* advance past the all-zero dlocn struct */
di + + ;
dlocn + + ;
dlocn_offset + = 16 ;
/* sanity check */
if ( ( void * ) dlocn ! = ( void * ) ( buf + dlocn_offset - lh_offset ) )
log_print ( " CHECK: problem with pv_header.disk_locn[%d] offset calculation " , di ) ;
while ( ( tmp = xlate64 ( dlocn - > offset ) ) ) {
if ( print_fields ) {
log_print ( " pv_header.disk_locn[%d] at %llu # location of metadata area " , di ,
( unsigned long long ) dlocn_offset ) ;
log_print ( " pv_header.disk_locn[%d].offset %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > offset ) ) ;
log_print ( " pv_header.disk_locn[%d].size %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > size ) ) ;
}
if ( ! mda_count ) {
* mda1_offset = xlate64 ( dlocn - > offset ) ;
* mda1_size = xlate64 ( dlocn - > size ) ;
2021-01-19 20:21:20 +03:00
/*
* mda1 offset is page size from machine that created it ,
* warn if it ' s not one of the expected page sizes .
*/
if ( ( * mda1_offset ! = 4096 ) & & ( * mda1_offset ! = 8192 ) & & ( * mda1_offset ! = 65536 ) ) {
log_print ( " WARNING: pv_header.disk_locn[%d].offset %llu is unexpected # for first mda " ,
di , ( unsigned long long ) * mda1_offset ) ;
2019-05-31 22:10:44 +03:00
}
} else {
* mda2_offset = xlate64 ( dlocn - > offset ) ;
* mda2_size = xlate64 ( dlocn - > size ) ;
/*
* No fixed location for second mda , so we have to look for
* mda_header at this offset to see if it ' s correct .
*/
}
di + + ;
dlocn + + ;
dlocn_offset + = 16 ;
mda_count + + ;
}
2019-10-01 00:20:17 +03:00
* mda_count_out = mda_count ;
2019-05-31 22:10:44 +03:00
/* all-zero dlocn struct is area list end */
if ( print_fields ) {
log_print ( " pv_header.disk_locn[%d] at %llu # location list end " , di ,
( unsigned long long ) dlocn_offset ) ;
log_print ( " pv_header.disk_locn[%d].offset %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > offset ) ) ;
log_print ( " pv_header.disk_locn[%d].size %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > size ) ) ;
}
/* advance past the all-zero dlocn struct */
di + + ;
dlocn + + ;
dlocn_offset + = 16 ;
/*
* pv_header_extension follows the last disk_locn
* terminating struct , so it ' s not always at the
* same location .
*/
pvhe = ( struct pv_header_extension * ) dlocn ;
pvhe_offset = dlocn_offset ; /* from start of disk */
/* sanity check */
if ( ( void * ) pvhe ! = ( void * ) ( buf + pvhe_offset - lh_offset ) )
log_print ( " CHECK: problem with pv_header_extension offset calculation " ) ;
if ( print_fields ) {
log_print ( " pv_header_extension at %llu " , ( unsigned long long ) pvhe_offset ) ;
log_print ( " pv_header_extension.version %u " , xlate32 ( pvhe - > version ) ) ;
log_print ( " pv_header_extension.flags %u " , xlate32 ( pvhe - > flags ) ) ;
}
/*
* The pv_header_extension is 8 bytes , excluding disk_locn ' s .
* disk_locn structs immediately follow the pv_header_extension .
* Each disk_locn is 16 bytes .
*/
di = 0 ;
dlocn = pvhe - > bootloader_areas_xl ;
dlocn_offset = pvhe_offset + 8 ;
while ( ( tmp = xlate64 ( dlocn - > offset ) ) ) {
if ( print_fields ) {
log_print ( " pv_header_extension.disk_locn[%d] at %llu # bootloader area " , di ,
( unsigned long long ) dlocn_offset ) ;
log_print ( " pv_header_extension.disk_locn[%d].offset %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > offset ) ) ;
log_print ( " pv_header_extension.disk_locn[%d].size %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > size ) ) ;
}
di + + ;
dlocn + + ;
dlocn_offset + = 16 ;
}
/* all-zero dlocn struct is area list end */
if ( print_fields ) {
log_print ( " pv_header_extension.disk_locn[%d] at %llu # location list end " , di ,
( unsigned long long ) dlocn_offset ) ;
log_print ( " pv_header_extension.disk_locn[%d].offset %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > offset ) ) ;
log_print ( " pv_header_extension.disk_locn[%d].size %llu " , di ,
( unsigned long long ) xlate64 ( dlocn - > size ) ) ;
}
2019-11-14 21:31:29 +03:00
if ( bad )
return 0 ;
return 1 ;
2019-05-31 22:10:44 +03:00
}
/*
2019-10-30 00:08:43 +03:00
* all sizes and offsets in bytes
*
2019-05-31 22:10:44 +03:00
* mda_offset and mda_size are the location / size of the metadata area ,
* which starts with the mda_header and continues through the circular
* buffer of text .
*
* mda_offset and mda_size values come from the pv_header / disk_locn ,
* which could be incorrect .
*
* We know that the first mda_offset will always be 4096 , so we use
* that value regardless of what the first mda_offset value in the
* pv_header is .
*/
2019-10-22 21:28:45 +03:00
static int _dump_mda_header ( struct cmd_context * cmd , struct settings * set ,
2019-05-31 22:10:44 +03:00
int print_fields , int print_metadata , int print_area ,
const char * tofile ,
2020-03-03 01:26:44 +03:00
struct device * dev , struct devicefile * def ,
2019-05-31 22:10:44 +03:00
uint64_t mda_offset , uint64_t mda_size ,
2019-06-06 00:23:23 +03:00
uint32_t * checksum0_ret ,
int * found_header )
2019-05-31 22:10:44 +03:00
{
2019-10-30 00:08:43 +03:00
char buf [ 512 ] ;
2019-05-31 22:10:44 +03:00
char str [ 256 ] ;
2019-10-30 00:08:43 +03:00
char * mda_buf ;
2019-05-31 22:10:44 +03:00
struct mda_header * mh ;
struct raw_locn * rlocn0 , * rlocn1 ;
uint64_t rlocn0_offset , rlocn1_offset ;
2019-10-30 00:08:43 +03:00
uint64_t meta_offset = 0 ; /* bytes */
uint64_t meta_size = 0 ; /* bytes */
2019-05-31 22:10:44 +03:00
uint32_t meta_checksum = 0 ;
int mda_num = ( mda_offset = = 4096 ) ? 1 : 2 ;
int bad = 0 ;
* checksum0_ret = 0 ; /* checksum from raw_locn[0] */
/*
* The first mda_header is 4096 bytes from the start
* of the device . Each mda_header is 512 bytes .
*
* The start / size values in the mda_header should
* match the mda_offset / mda_size values that came
* from the pv_header / disk_locn .
*
* ( Why was mda_header magic made only partially printable ? )
*/
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , mda_offset , 512 , buf ) ) {
2019-05-31 22:10:44 +03:00
log_print ( " CHECK: failed to read mda_header at %llu " , ( unsigned long long ) mda_offset ) ;
return 0 ;
}
mh = ( struct mda_header * ) buf ;
if ( print_fields ) {
log_print ( " mda_header_%d at %llu # metadata area " , mda_num , ( unsigned long long ) mda_offset ) ;
log_print ( " mda_header_%d.checksum 0x%x " , mda_num , xlate32 ( mh - > checksum_xl ) ) ;
log_print ( " mda_header_%d.magic 0x%s " , mda_num , _chars_to_hexstr ( mh - > magic , str , 16 , 256 , " mda_header.magic " ) ) ;
log_print ( " mda_header_%d.version %u " , mda_num , xlate32 ( mh - > version ) ) ;
log_print ( " mda_header_%d.start %llu " , mda_num , ( unsigned long long ) xlate64 ( mh - > start ) ) ;
log_print ( " mda_header_%d.size %llu " , mda_num , ( unsigned long long ) xlate64 ( mh - > size ) ) ;
}
2019-06-06 00:23:23 +03:00
if ( ! _check_mda_header ( mh , mda_num , mda_offset , mda_size , found_header ) )
2019-05-31 22:10:44 +03:00
bad + + ;
if ( print_area ) {
2020-03-03 01:26:44 +03:00
if ( ! _dump_meta_area ( dev , def , tofile , mda_offset , mda_size ) )
2019-05-31 22:10:44 +03:00
bad + + ;
goto out ;
}
/*
* mda_header is 40 bytes , the raw_locn structs
* follow immediately after , each raw_locn struct
* is 24 bytes .
*/
rlocn0 = mh - > raw_locns ;
rlocn0_offset = mda_offset + 40 ; /* from start of disk */
/* sanity check */
if ( ( void * ) rlocn0 ! = ( void * ) ( buf + rlocn0_offset - mda_offset ) )
log_print ( " CHECK: problem with rlocn0 offset calculation " ) ;
meta_offset = 0 ;
meta_size = 0 ;
meta_checksum = 0 ;
2020-03-03 01:26:44 +03:00
if ( ! _dump_raw_locn ( dev , def , print_fields , rlocn0 , 0 , rlocn0_offset , mda_num , mda_offset , mda_size ,
2019-05-31 22:10:44 +03:00
& meta_offset , & meta_size , & meta_checksum ) )
bad + + ;
* checksum0_ret = meta_checksum ;
rlocn1 = ( struct raw_locn * ) ( ( char * ) mh - > raw_locns + 24 ) ;
rlocn1_offset = rlocn0_offset + 24 ;
/* sanity check */
if ( ( void * ) rlocn1 ! = ( void * ) ( buf + rlocn1_offset - mda_offset ) )
log_print ( " CHECK: problem with rlocn1 offset calculation " ) ;
2020-03-03 01:26:44 +03:00
if ( ! _dump_raw_locn ( dev , def , print_fields , rlocn1 , 1 , rlocn1_offset , mda_num , mda_offset , mda_size ,
2019-05-31 22:10:44 +03:00
NULL , NULL , NULL ) )
bad + + ;
if ( ! meta_offset )
goto out ;
2019-06-05 19:10:37 +03:00
/*
* looking at the current copy of metadata referenced by raw_locn
*/
2019-10-18 01:24:22 +03:00
if ( print_metadata < = PRINT_CURRENT ) {
2020-03-03 01:26:44 +03:00
if ( ! _dump_current_text ( dev , def , print_fields , print_metadata , tofile , mda_num , 0 , mda_offset , mda_size , meta_offset , meta_size , meta_checksum ) )
2019-06-05 19:10:37 +03:00
bad + + ;
}
/*
* looking at all copies of the metadata in the area
*/
2019-10-18 01:24:22 +03:00
if ( print_metadata = = PRINT_ALL ) {
2019-10-30 00:08:43 +03:00
if ( ! ( mda_buf = zalloc ( mda_size ) ) )
2019-10-18 01:24:22 +03:00
goto_out ;
2019-06-05 19:10:37 +03:00
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , mda_offset , mda_size , mda_buf ) ) {
2019-10-18 01:24:22 +03:00
log_print ( " CHECK: failed to read metadata area at offset %llu size %llu " ,
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
2019-06-05 19:10:37 +03:00
bad + + ;
2019-10-30 00:08:43 +03:00
free ( mda_buf ) ;
2019-10-18 01:24:22 +03:00
goto out ;
}
2020-03-03 01:26:44 +03:00
_dump_all_text ( cmd , set , tofile , dev , def , mda_num , mda_offset , mda_size , mda_buf ) ;
2019-10-30 00:08:43 +03:00
free ( mda_buf ) ;
2019-06-05 19:10:37 +03:00
}
2019-05-31 22:10:44 +03:00
/* Should we also check text metadata if it exists in rlocn1? */
out :
2019-11-14 21:31:29 +03:00
if ( bad )
return 0 ;
return 1 ;
2019-05-31 22:10:44 +03:00
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2019-10-22 21:28:45 +03:00
static int _dump_headers ( struct cmd_context * cmd , const char * dump , struct settings * set ,
2020-03-03 01:26:44 +03:00
uint64_t labelsector , struct device * dev , struct devicefile * def )
2019-05-31 22:10:44 +03:00
{
2019-10-30 00:08:43 +03:00
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
2019-05-31 22:10:44 +03:00
uint32_t mda1_checksum , mda2_checksum ;
2019-10-01 00:20:17 +03:00
int mda_count = 0 ;
2019-05-31 22:10:44 +03:00
int bad = 0 ;
2020-03-03 01:26:44 +03:00
if ( ! _dump_label_and_pv_header ( cmd , labelsector , dev , def , 1 , NULL ,
2019-10-01 00:20:17 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) )
2019-05-31 22:10:44 +03:00
bad + + ;
2019-10-01 00:20:17 +03:00
if ( ! mda_count ) {
log_print ( " zero metadata copies " ) ;
2019-11-04 22:38:23 +03:00
return 1 ;
2019-10-01 00:20:17 +03:00
}
2019-05-31 22:10:44 +03:00
/*
2020-10-27 22:28:54 +03:00
* The first mda is usually 4096 bytes from the start of the device .
* ( If created by a machine with larger pages it could be 8 k / 16 k / 64 k . )
2019-05-31 22:10:44 +03:00
*/
2020-10-27 22:28:54 +03:00
if ( ! _dump_mda_header ( cmd , set , 1 , 0 , 0 , NULL , dev , def , mda1_offset , mda1_size , & mda1_checksum , NULL ) )
2019-05-31 22:10:44 +03:00
bad + + ;
if ( mda2_offset ) {
2020-05-29 21:26:43 +03:00
if ( ! _dump_mda_header ( cmd , set , 1 , 0 , 0 , NULL , dev , def , mda2_offset , mda2_size , & mda2_checksum , NULL ) )
2019-05-31 22:10:44 +03:00
bad + + ;
/* This probably indicates that one was committed and the other not. */
if ( mda1_checksum & & mda2_checksum & & ( mda1_checksum ! = mda2_checksum ) )
log_print ( " CHECK: mdas have different raw_locn[0].checksum values " ) ;
}
if ( bad ) {
log_error ( " Found bad header or metadata values. " ) ;
2019-11-04 22:38:23 +03:00
return 0 ;
2019-05-31 22:10:44 +03:00
}
2019-11-04 22:38:23 +03:00
return 1 ;
2019-05-31 22:10:44 +03:00
}
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2019-10-22 21:28:45 +03:00
static int _dump_metadata ( struct cmd_context * cmd , const char * dump , struct settings * set ,
2020-03-03 01:26:44 +03:00
uint64_t labelsector , struct device * dev , struct devicefile * def ,
2019-06-05 19:10:37 +03:00
int print_metadata , int print_area )
2019-05-22 22:25:08 +03:00
{
const char * tofile = NULL ;
2019-10-30 00:08:43 +03:00
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
2019-05-31 22:10:44 +03:00
uint32_t mda1_checksum , mda2_checksum ;
2019-10-01 00:20:17 +03:00
int mda_count = 0 ;
2019-05-22 22:25:08 +03:00
int mda_num = 1 ;
2019-05-31 22:10:44 +03:00
int bad = 0 ;
2019-05-22 22:25:08 +03:00
if ( arg_is_set ( cmd , file_ARG ) ) {
if ( ! ( tofile = arg_str_value ( cmd , file_ARG , NULL ) ) )
2019-11-04 22:38:23 +03:00
return 0 ;
2019-05-22 22:25:08 +03:00
}
2019-11-04 22:38:23 +03:00
if ( set - > mda_num )
mda_num = set - > mda_num ;
else if ( arg_is_set ( cmd , pvmetadatacopies_ARG ) )
2019-05-22 22:25:08 +03:00
mda_num = arg_int_value ( cmd , pvmetadatacopies_ARG , 1 ) ;
2020-03-03 01:26:44 +03:00
if ( ! _dump_label_and_pv_header ( cmd , labelsector , dev , def , 0 , NULL ,
2019-10-01 00:20:17 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) )
2019-05-31 22:10:44 +03:00
bad + + ;
2019-05-22 22:25:08 +03:00
2019-10-01 00:20:17 +03:00
if ( ! mda_count ) {
log_print ( " zero metadata copies " ) ;
2019-11-04 22:38:23 +03:00
return 1 ;
2019-10-01 00:20:17 +03:00
}
2019-05-22 22:25:08 +03:00
2019-05-31 22:10:44 +03:00
/*
* The first mda is always 4096 bytes from the start of the device .
*/
if ( mda_num = = 1 ) {
2020-10-27 22:28:54 +03:00
if ( ! _dump_mda_header ( cmd , set , 0 , print_metadata , print_area , tofile , dev , def , mda1_offset , mda1_size , & mda1_checksum , NULL ) )
2019-05-31 22:10:44 +03:00
bad + + ;
} else if ( mda_num = = 2 ) {
if ( ! mda2_offset ) {
log_print ( " CHECK: second mda not found " ) ;
bad + + ;
} else {
2020-03-03 01:26:44 +03:00
if ( ! _dump_mda_header ( cmd , set , 0 , print_metadata , print_area , tofile , dev , def , mda2_offset , mda2_size , & mda2_checksum , NULL ) )
2019-05-31 22:10:44 +03:00
bad + + ;
}
2019-05-22 22:25:08 +03:00
}
2019-05-31 22:10:44 +03:00
if ( bad ) {
log_error ( " Found bad header or metadata values. " ) ;
2019-11-04 22:38:23 +03:00
return 0 ;
2019-05-31 22:10:44 +03:00
}
2019-11-04 22:38:23 +03:00
return 1 ;
2019-05-22 22:25:08 +03:00
}
2007-03-31 01:00:26 +04:00
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2019-10-22 21:28:45 +03:00
static int _dump_found ( struct cmd_context * cmd , struct settings * set , uint64_t labelsector , struct device * dev )
2019-06-06 00:23:23 +03:00
{
2019-10-30 00:08:43 +03:00
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
2019-06-06 00:23:23 +03:00
uint32_t mda1_checksum = 0 , mda2_checksum = 0 ;
int found_label = 0 , found_header1 = 0 , found_header2 = 0 ;
2019-10-01 00:20:17 +03:00
int mda_count = 0 ;
2019-06-06 00:23:23 +03:00
int bad = 0 ;
2020-03-03 01:26:44 +03:00
if ( ! _dump_label_and_pv_header ( cmd , labelsector , dev , NULL , 0 , & found_label ,
2019-10-01 00:20:17 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) )
2019-06-06 00:23:23 +03:00
bad + + ;
if ( found_label & & mda1_offset ) {
2020-10-27 22:28:54 +03:00
if ( ! _dump_mda_header ( cmd , set , 0 , 0 , 0 , NULL , dev , NULL , mda1_offset , mda1_size , & mda1_checksum , & found_header1 ) )
2019-06-06 00:23:23 +03:00
bad + + ;
}
if ( found_label & & mda2_offset ) {
2020-03-03 01:26:44 +03:00
if ( ! _dump_mda_header ( cmd , set , 0 , 0 , 0 , NULL , dev , NULL , mda2_offset , mda2_size , & mda2_checksum , & found_header2 ) )
2019-06-06 00:23:23 +03:00
bad + + ;
}
if ( found_label )
log_print ( " Found label on %s, sector %llu, type=LVM2 001 " ,
dev_name ( dev ) , ( unsigned long long ) labelsector ) ;
else {
log_error ( " Could not find LVM label on %s " , dev_name ( dev ) ) ;
return 0 ;
}
if ( found_header1 )
log_print ( " Found text metadata area: offset=%llu, size=%llu " ,
( unsigned long long ) mda1_offset ,
( unsigned long long ) mda1_size ) ;
if ( found_header2 )
log_print ( " Found text metadata area: offset=%llu, size=%llu " ,
( unsigned long long ) mda2_offset ,
( unsigned long long ) mda2_size ) ;
if ( bad )
return 0 ;
return 1 ;
}
2019-10-18 01:24:22 +03:00
/*
2019-10-30 00:08:43 +03:00
* all sizes and offsets in bytes ( except dev_sectors from dev_get_size )
*
2019-10-18 01:24:22 +03:00
* Look for metadata text in common locations , without using any headers
* ( pv_header / mda_header ) to find the location , since the headers may be
* zeroed / damaged .
*/
2019-10-22 21:28:45 +03:00
static int _dump_search ( struct cmd_context * cmd , const char * dump , struct settings * set ,
2020-03-03 01:26:44 +03:00
uint64_t labelsector , struct device * dev , struct devicefile * def )
2019-10-18 01:24:22 +03:00
{
const char * tofile = NULL ;
char * buf ;
2019-10-30 00:08:43 +03:00
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
2020-02-28 21:00:23 +03:00
uint64_t mda_offset = 0 , mda_size = 0 ; /* bytes */
int mda_num = 0 ;
int found_label = 0 ;
2019-10-18 01:24:22 +03:00
int mda_count = 0 ;
2020-02-28 21:00:23 +03:00
int set_vals = 0 ;
2019-10-18 01:24:22 +03:00
if ( arg_is_set ( cmd , file_ARG ) ) {
if ( ! ( tofile = arg_str_value ( cmd , file_ARG , NULL ) ) )
2019-11-04 22:38:23 +03:00
return_0 ;
2019-10-18 01:24:22 +03:00
}
2020-03-03 01:26:44 +03:00
_dump_label_and_pv_header ( cmd , labelsector , dev , def , 0 , & found_label ,
2019-10-18 01:24:22 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) ;
/*
* For mda1 , mda_offset is always 4096 bytes from the start of
* device , and mda_size is the space between mda_offset and
* the first PE which is usually at 1 MB .
*
* For mda2 , take the dev_size , reduce that to be a 1 MB
* multiple . The mda_offset is then 1 MB prior to that ,
* and mda_size is the amount of space between that offset
* and the end of the device .
*
* The second mda is generally 4 K larger ( at least ) than the
* first mda because the first mda begins at a 4 K offset from
* the start of the device and ends on a 1 MB boundary .
* The second mda begins on a 1 MB boundary ( no 4 K offset like
* mda1 ) , then goes to the end of the device . Extra space
* at the end of device ( mod 1 MB extra ) can make mda2 even
* larger .
*/
2020-02-28 21:00:23 +03:00
/*
* When mda offset or size is set in command line settings ,
* use what is set and calculate an unspecified value .
*/
if ( set - > mda_offset_set | | set - > mda_size_set ) {
if ( set - > mda_offset_set ) {
mda_offset = set - > mda_offset ;
set_vals + + ;
}
if ( set - > mda_size_set ) {
mda_size = set - > mda_size ;
set_vals + + ;
}
if ( ( mda_num = set - > mda_num ) )
set_vals + + ;
if ( mda_offset & & mda_size )
goto search ;
if ( set_vals < 2 ) {
log_error ( " Specify at least two values from: mda_num, mda_offset, mda_size. " ) ;
return 0 ;
}
if ( ! mda_size ) {
if ( ( mda_num = = 1 ) & & mda1_size )
mda_size = mda1_size ; /* from headers */
else if ( ( mda_num = = 2 ) & & mda2_size )
mda_size = mda2_size ; /* from headers */
else if ( mda_num = = 1 )
mda_size = ONE_MB_IN_BYTES - 4096 ;
else if ( mda_num = = 2 )
mda_size = mda2_size_from_offset ( dev , mda_offset ) ;
}
if ( ! mda_offset ) {
if ( mda_num = = 1 )
mda_offset = 4096 ;
else if ( mda_num = = 2 )
mda_offset = mda2_offset_from_size ( dev , mda_size ) ;
}
if ( set - > mda2_offset_set | | set - > mda2_size_set )
log_print ( " Ignoring mda2 values from settings. " ) ;
goto search ;
}
if ( set - > mda2_offset_set | | set - > mda2_size_set ) {
if ( set - > mda2_offset_set ) {
mda_offset = set - > mda2_offset ;
set_vals + + ;
}
if ( set - > mda_size_set ) {
mda_size = set - > mda2_size ;
set_vals + + ;
}
if ( ( mda_num = set - > mda_num ) )
set_vals + + ;
if ( mda_offset & & mda_size )
goto search ;
if ( set_vals < 2 ) {
log_error ( " Specify at least two values from: mda_num, mda2_offset, mda2_size. " ) ;
return 0 ;
}
if ( mda_num = = 1 ) {
log_error ( " Invalid mda_num=1 and mda2 settings. " ) ;
return 0 ;
}
if ( ! mda_size ) {
if ( mda2_size )
mda_size = mda2_size ; /* from headers */
else
mda_size = mda2_size_from_offset ( dev , mda_offset ) ;
}
if ( ! mda_offset ) {
if ( mda2_offset )
mda_offset = mda2_offset ; /* from headers */
else
mda_offset = mda2_offset_from_size ( dev , mda_size ) ;
}
goto search ;
}
/*
* When no mda offset or size is set in command line settings ,
* the user can just set mda_num = 1 | 2 to control if we pick defaults
* for mda1 or mda2 . If unspecified , we search in the first mda .
*/
if ( set - > mda_num )
mda_num = set - > mda_num ;
else if ( arg_is_set ( cmd , pvmetadatacopies_ARG ) )
mda_num = arg_int_value ( cmd , pvmetadatacopies_ARG , 1 ) ;
else
mda_num = 1 ;
/*
* No mda offset or size was set in command line settings ,
* so we use what ' s in the headers or defaults .
*/
if ( ( mda_num = = 1 ) & & found_label & & mda1_offset & & mda1_size ) {
/* use header values when available */
2020-10-27 22:28:54 +03:00
mda_offset = mda1_offset ;
2020-02-28 21:00:23 +03:00
mda_size = mda1_size ;
2019-10-22 21:28:45 +03:00
} else if ( mda_num = = 1 ) {
2020-02-28 21:00:23 +03:00
/* use default values when header values are not available */
2019-10-18 01:24:22 +03:00
mda_offset = 4096 ;
mda_size = ONE_MB_IN_BYTES - 4096 ;
2020-02-28 21:00:23 +03:00
log_print ( " Using common defaults for first mda: offset %llu size %llu. " ,
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
log_print ( " Override defaults with --settings \" mda_offset=<bytes> mda_size=<bytes> \" " ) ;
} else if ( ( mda_num = = 2 ) & & found_label & & mda2_offset & & mda2_size ) {
/* use header values when available */
mda_offset = mda2_offset ;
mda_size = mda2_size ;
2019-10-18 01:24:22 +03:00
} else if ( mda_num = = 2 ) {
2020-02-28 21:00:23 +03:00
/* use default values when header values are not available */
2019-10-18 01:24:22 +03:00
uint64_t dev_sectors = 0 ;
uint64_t dev_bytes ;
uint64_t extra_bytes ;
2019-10-30 00:08:43 +03:00
if ( dev_get_size ( dev , & dev_sectors ) )
stack ;
2019-10-18 01:24:22 +03:00
dev_bytes = dev_sectors * 512 ;
extra_bytes = dev_bytes % ONE_MB_IN_BYTES ;
if ( dev_bytes < ( 2 * ONE_MB_IN_BYTES ) )
2019-11-04 22:38:23 +03:00
return_0 ;
2019-10-18 01:24:22 +03:00
mda_offset = dev_bytes - extra_bytes - ONE_MB_IN_BYTES ;
mda_size = dev_bytes - mda_offset ;
2020-02-28 21:00:23 +03:00
log_print ( " Using defaults for second mda: offset %llu size %llu. " ,
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
log_print ( " Override defaults with --settings \" mda_offset=<bytes> mda_size=<bytes> \" " ) ;
} else {
log_error ( " No mda location. " ) ;
2021-03-09 13:42:29 +03:00
return 0 ;
2020-02-28 21:00:23 +03:00
}
2019-10-18 01:24:22 +03:00
2020-02-28 21:00:23 +03:00
search :
if ( ( mda_num = = 1 ) & & ( ( mda1_offset & & mda1_offset ! = mda_offset ) | | ( mda1_size & & mda1_size ! = mda_size ) ) ) {
2019-10-18 01:24:22 +03:00
log_print ( " Ignoring mda1_offset %llu mda1_size %llu from pv_header. " ,
( unsigned long long ) mda1_offset ,
( unsigned long long ) mda1_size ) ;
}
2020-02-28 21:00:23 +03:00
if ( ( mda_num = = 2 ) & & ( ( mda2_offset & & mda2_offset ! = mda_offset ) | | ( mda2_size & & mda2_size ! = mda_size ) ) ) {
log_print ( " Ignoring mda2_offset %llu mda2_size %llu from pv_header. " ,
2019-10-18 01:24:22 +03:00
( unsigned long long ) mda2_offset ,
( unsigned long long ) mda2_size ) ;
}
2019-10-22 21:28:45 +03:00
log_print ( " Searching for metadata at offset %llu size %llu " ,
2019-10-18 01:24:22 +03:00
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
2019-10-30 00:08:43 +03:00
if ( ! ( buf = zalloc ( mda_size ) ) )
2019-11-04 22:38:23 +03:00
return_0 ;
2019-10-18 01:24:22 +03:00
2020-03-03 01:26:44 +03:00
if ( ! _read_bytes ( dev , def , mda_offset , mda_size , buf ) ) {
2019-10-18 01:24:22 +03:00
log_print ( " CHECK: failed to read metadata area at offset %llu size %llu " ,
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
free ( buf ) ;
2019-11-04 22:38:23 +03:00
return 0 ;
2019-10-18 01:24:22 +03:00
}
2020-03-03 01:26:44 +03:00
_dump_all_text ( cmd , set , tofile , dev , def , mda_num , mda_offset , mda_size , buf ) ;
2019-10-18 01:24:22 +03:00
2019-10-22 21:28:45 +03:00
free ( buf ) ;
2019-11-04 22:38:23 +03:00
return 1 ;
2019-10-22 21:28:45 +03:00
}
2019-10-18 01:24:22 +03:00
2019-10-30 00:08:43 +03:00
/* all sizes and offsets in bytes */
2019-10-22 21:28:45 +03:00
static int _get_one_setting ( struct cmd_context * cmd , struct settings * set , char * key , char * val )
{
if ( ! strncmp ( key , " metadata_offset " , strlen ( " metadata_offset " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > metadata_offset ) ! = 1 )
goto_bad ;
set - > metadata_offset_set = 1 ;
return 1 ;
}
2019-10-18 01:24:22 +03:00
2019-10-30 00:08:43 +03:00
if ( ! strncmp ( key , " seqno " , strlen ( " seqno " ) ) ) {
if ( sscanf ( val , " %u " , & set - > seqno ) ! = 1 )
goto_bad ;
set - > seqno_set = 1 ;
return 1 ;
}
if ( ! strncmp ( key , " backup_file " , strlen ( " backup_file " ) ) ) {
if ( ( set - > backup_file = strdup ( val ) ) )
return 1 ;
return 0 ;
}
2019-10-22 21:28:45 +03:00
if ( ! strncmp ( key , " mda_offset " , strlen ( " mda_offset " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > mda_offset ) ! = 1 )
goto_bad ;
set - > mda_offset_set = 1 ;
return 1 ;
}
2019-10-18 01:24:22 +03:00
2019-10-22 21:28:45 +03:00
if ( ! strncmp ( key , " mda_size " , strlen ( " mda_size " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > mda_size ) ! = 1 )
goto_bad ;
set - > mda_size_set = 1 ;
return 1 ;
}
2019-10-30 00:08:43 +03:00
if ( ! strncmp ( key , " mda2_offset " , strlen ( " mda2_offset " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > mda2_offset ) ! = 1 )
goto_bad ;
set - > mda2_offset_set = 1 ;
return 1 ;
}
if ( ! strncmp ( key , " mda2_size " , strlen ( " mda2_size " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > mda2_size ) ! = 1 )
goto_bad ;
set - > mda2_size_set = 1 ;
return 1 ;
}
if ( ! strncmp ( key , " device_size " , strlen ( " device_size " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > device_size ) ! = 1 )
goto_bad ;
set - > device_size_set = 1 ;
return 1 ;
}
if ( ! strncmp ( key , " data_offset " , strlen ( " data_offset " ) ) ) {
if ( sscanf ( val , " %llu " , ( unsigned long long * ) & set - > data_offset ) ! = 1 )
goto_bad ;
set - > data_offset_set = 1 ;
return 1 ;
}
if ( ! strncmp ( key , " pv_uuid " , strlen ( " pv_uuid " ) ) ) {
if ( strchr ( val , ' - ' ) & & ( strlen ( val ) = = 32 ) ) {
memcpy ( & set - > pvid , val , 32 ) ;
set - > pvid_set = 1 ;
return 1 ;
} else if ( id_read_format_try ( & set - > pvid , val ) ) {
set - > pvid_set = 1 ;
return 1 ;
} else {
log_error ( " Failed to parse UUID from pv_uuid setting. " ) ;
goto bad ;
}
}
if ( ! strncmp ( key , " mda_num " , strlen ( " mda_num " ) ) ) {
if ( sscanf ( val , " %u " , ( int * ) & set - > mda_num ) ! = 1 )
goto_bad ;
return 1 ;
}
2019-10-22 21:28:45 +03:00
bad :
log_error ( " Invalid setting: %s " , key ) ;
return 0 ;
}
2019-10-18 01:24:22 +03:00
2019-10-22 21:28:45 +03:00
static int _get_settings ( struct cmd_context * cmd , struct settings * set )
{
struct arg_value_group_list * group ;
const char * str ;
char key [ 64 ] ;
char val [ 64 ] ;
int num ;
int pos ;
/*
* " grouped " means that multiple - - settings options can be used .
* Each option is also allowed to contain multiple key = val pairs .
*/
dm_list_iterate_items ( group , & cmd - > arg_value_groups ) {
if ( ! grouped_arg_is_set ( group - > arg_values , settings_ARG ) )
continue ;
if ( ! ( str = grouped_arg_str_value ( group - > arg_values , settings_ARG , NULL ) ) )
break ;
pos = 0 ;
while ( pos < strlen ( str ) ) {
/* scan for "key1=val1 key2 = val2 key3= val3" */
memset ( key , 0 , sizeof ( key ) ) ;
memset ( val , 0 , sizeof ( val ) ) ;
if ( sscanf ( str + pos , " %63[^=]=%63s %n " , key , val , & num ) ! = 2 ) {
log_error ( " Invalid setting at: %s " , str + pos ) ;
return 0 ;
}
pos + = num ;
if ( ! _get_one_setting ( cmd , set , key , val ) )
return_0 ;
}
}
return 1 ;
2019-10-18 01:24:22 +03:00
}
2019-10-30 00:08:43 +03:00
/*
* pvck - - repairtype label_header
*
* Writes new label_header without changing pv_header fields .
* All constant values except for recalculated crc .
*
* all sizes and offsets in bytes
*/
static int _repair_label_header ( struct cmd_context * cmd , const char * repair ,
struct settings * set , uint64_t labelsector , struct device * dev )
2007-03-31 01:00:26 +04:00
{
2019-10-30 00:08:43 +03:00
char buf [ 512 ] ;
struct label_header * lh ;
struct pv_header * pvh ;
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
uint64_t lh_offset ; /* bytes */
uint64_t pvh_offset ; /* bytes */
uint32_t crc ;
int mda_count ;
int found_label = 0 ;
lh_offset = labelsector * 512 ; /* from start of disk */
2020-03-03 01:26:44 +03:00
_dump_label_and_pv_header ( cmd , labelsector , dev , NULL , 0 , & found_label ,
2019-10-30 00:08:43 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) ;
if ( ! found_label ) {
log_warn ( " WARNING: No LVM label found on %s. It may not be an LVM device. " , dev_name ( dev ) ) ;
if ( ! arg_count ( cmd , yes_ARG ) & &
yes_no_prompt ( " Write LVM header to device? " ) = = ' n ' )
return 0 ;
}
if ( ! dev_read_bytes ( dev , lh_offset , 512 , buf ) ) {
log_error ( " Failed to read label_header at %llu " , ( unsigned long long ) lh_offset ) ;
return 0 ;
}
lh = ( struct label_header * ) buf ;
pvh = ( struct pv_header * ) ( buf + 32 ) ;
pvh_offset = lh_offset + 32 ; /* from start of disk */
/* sanity check */
if ( ( void * ) pvh ! = ( void * ) ( buf + pvh_offset - lh_offset ) ) {
log_error ( " Problem with pv_header offset calculation " ) ;
return 0 ;
}
memcpy ( lh - > id , LABEL_ID , sizeof ( lh - > id ) ) ;
memcpy ( lh - > type , LVM2_LABEL , sizeof ( lh - > type ) ) ;
lh - > sector_xl = xlate64 ( labelsector ) ;
lh - > offset_xl = xlate32 ( 32 ) ;
crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) & lh - > offset_xl ,
LABEL_SIZE - ( ( uint8_t * ) & lh - > offset_xl - ( uint8_t * ) lh ) ) ;
lh - > crc_xl = xlate32 ( crc ) ;
log_print ( " Writing label_header.crc 0x%08x " , crc ) ;
if ( arg_is_set ( cmd , test_ARG ) ) {
log_warn ( " Skip writing in test mode. " ) ;
return 1 ;
}
if ( ! arg_count ( cmd , yes_ARG ) & &
yes_no_prompt ( " Write new LVM header to %s? " , dev_name ( dev ) ) = = ' n ' )
return 0 ;
if ( ! dev_write_bytes ( dev , lh_offset , 512 , buf ) ) {
log_error ( " Failed to write new header " ) ;
return 0 ;
}
return 1 ;
}
static int _get_pv_info_from_metadata ( struct cmd_context * cmd , struct settings * set ,
struct device * dev ,
struct pv_header * pvh , int found_label ,
char * text_buf , uint64_t text_size ,
char * pvid ,
uint64_t * device_size_sectors ,
uint64_t * pe_start_sectors )
{
int8_t pvid_cur [ ID_LEN + 1 ] ; /* found in existing pv_header */
int8_t pvid_set [ ID_LEN + 1 ] ; /* set by user in --settings */
int8_t pvid_use [ ID_LEN + 1 ] ; /* the pvid chosen to use */
int pvid_cur_valid = 0 ; /* pvid_cur is valid */
int pvid_use_valid = 0 ; /* pvid_use is valid */
struct dm_config_tree * cft = NULL ;
struct volume_group * vg = NULL ;
struct pv_list * pvl ;
memset ( pvid_cur , 0 , sizeof ( pvid_cur ) ) ;
memset ( pvid_set , 0 , sizeof ( pvid_set ) ) ;
memset ( pvid_use , 0 , sizeof ( pvid_use ) ) ;
2007-04-26 00:03:16 +04:00
2019-10-22 00:39:46 +03:00
/*
2019-10-30 00:08:43 +03:00
* Check if there ' s a valid existing PV UUID at the expected location .
2019-10-22 00:39:46 +03:00
*/
2019-10-30 00:08:43 +03:00
if ( ! id_read_format_try ( ( struct id * ) & pvid_cur , ( char * ) & pvh - > pv_uuid ) )
memset ( & pvid_cur , 0 , ID_LEN ) ;
else {
memcpy ( & pvid_use , & pvid_cur , ID_LEN ) ;
pvid_use_valid = 1 ;
pvid_cur_valid = 1 ;
}
2019-10-22 00:39:46 +03:00
2019-10-30 00:08:43 +03:00
if ( set - > pvid_set ) {
memcpy ( & pvid_set , & set - > pvid , ID_LEN ) ;
memcpy ( & pvid_use , & pvid_set , ID_LEN ) ;
pvid_use_valid = 1 ;
}
2019-10-22 00:39:46 +03:00
2019-10-30 00:08:43 +03:00
if ( pvid_cur_valid & & set - > pvid_set & & memcmp ( & pvid_cur , & pvid_set , ID_LEN ) ) {
log_warn ( " WARNING: existing PV UUID %s does not match pv_uuid setting %s. " ,
( char * ) & pvid_cur , ( char * ) & pvid_set ) ;
memcpy ( & pvid_use , & pvid_set , ID_LEN ) ;
pvid_use_valid = 1 ;
}
if ( ! _text_buf_parse ( text_buf , text_size , & cft ) ) {
log_error ( " Invalid metadata file. " ) ;
return 0 ;
}
if ( ! ( vg = vg_from_config_tree ( cmd , cft ) ) ) {
config_destroy ( cft ) ;
log_error ( " Invalid metadata file. " ) ;
return 0 ;
}
config_destroy ( cft ) ;
/*
* If pvid_use is set , look for metadata PV section with matching PV UUID .
* Otherwise , look for metadata PV section with device name matching dev .
*
* pvid_use will be empty if there ' s no valid UUID in the existing
* pv_header , and the user did not specify a UUID in - - settings .
*
* Choosing the PV UUID based only on a matching device name is somewhat
* weak since device names are dynamic , but we do scan devs to verify the
* chosen PV UUID is not in use elsewhere , which should avoid most of the
* risk of picking a wrong UUID .
*/
if ( ! pvid_use_valid ) {
dm_list_iterate_items ( pvl , & vg - > pvs ) {
if ( ! strcmp ( pvl - > pv - > device_hint , dev_name ( dev ) ) )
goto copy_pv ;
}
} else {
dm_list_iterate_items ( pvl , & vg - > pvs ) {
if ( id_equal ( & pvl - > pv - > id , ( struct id * ) & pvid_use ) )
goto copy_pv ;
2019-10-22 00:39:46 +03:00
}
}
2019-10-30 00:08:43 +03:00
release_vg ( vg ) ;
2019-10-22 21:28:45 +03:00
2019-10-30 00:08:43 +03:00
/*
* Don ' t know what PV UUID to use , possibly :
* . the user set a PV UUID that does not exist in the metadata file
* . the UUID in the existing pv_header does not exist in the metadata file
* . the metadata has no PV with a device name hint matching this device
*/
if ( set - > pvid_set )
log_error ( " PV UUID %s not found in metadata file. " , ( char * ) & pvid_set ) ;
else if ( pvid_cur_valid )
log_error ( " PV UUID %s in existing pv_header not found in metadata file. " , ( char * ) & pvid_cur ) ;
else if ( ! pvid_use_valid )
log_error ( " PV name %s not found in metadata file. " , dev_name ( dev ) ) ;
log_error ( " No valid PV UUID, specify a PV UUID from metadata in --settings. " ) ;
return 0 ;
2019-10-22 00:39:46 +03:00
2019-10-30 00:08:43 +03:00
copy_pv :
* device_size_sectors = pvl - > pv - > size ;
* pe_start_sectors = pvl - > pv - > pe_start ;
memcpy ( pvid , & pvl - > pv - > id , ID_LEN ) ;
2019-10-22 00:39:46 +03:00
2019-10-30 00:08:43 +03:00
release_vg ( vg ) ;
return 1 ;
}
2019-05-22 22:25:08 +03:00
2019-10-30 00:08:43 +03:00
/*
* Checking for mda1 is simple because it ' s always at the same location ,
* and when a PV is set to use zero metadata areas , this space is just
* unused . We could look for any surviving metadata text in mda1
* containing the VG UUID to confirm that this PV has been used for
* metadata , but if the start of the disk has been zeroed , then we
* may not find any .
*/
static int _check_for_mda1 ( struct cmd_context * cmd , struct device * dev )
{
char buf [ 512 ] ;
struct mda_header * mh ;
2019-06-05 19:10:37 +03:00
2019-10-30 00:08:43 +03:00
if ( ! dev_read_bytes ( dev , 4096 , 512 , buf ) )
return_0 ;
2019-05-22 22:25:08 +03:00
2019-10-30 00:08:43 +03:00
mh = ( struct mda_header * ) buf ;
2019-05-22 22:25:08 +03:00
2019-10-30 00:08:43 +03:00
if ( ! memcmp ( mh - > magic , FMTT_MAGIC , sizeof ( mh - > magic ) ) )
return 1 ;
return 0 ;
}
2019-10-18 01:24:22 +03:00
2019-10-30 00:08:43 +03:00
/*
* Checking for mda2 is more complicated . Very often PVs will not use
* a second mda2 , and the location is not quite as predictable . Also ,
* if we mistakenly conclude that an mda2 belongs on the PV , we ' d end
* up writing into the data area .
*
* all sizes and offsets in bytes
*/
static int _check_for_mda2 ( struct cmd_context * cmd , struct device * dev ,
uint64_t device_size , struct metadata_file * mf ,
uint64_t * mda2_offset , uint64_t * mda2_size )
{
struct mda_header * mh ;
char buf2 [ 256 ] ;
char * buf ;
uint64_t mda_offset , mda_size , extra_bytes ; /* bytes */
int i , found = 0 ;
if ( device_size < ( 2 * ONE_MB_IN_BYTES ) )
return_0 ;
extra_bytes = device_size % ONE_MB_IN_BYTES ;
mda_offset = device_size - extra_bytes - ONE_MB_IN_BYTES ;
mda_size = device_size - mda_offset ;
if ( ! ( buf = malloc ( mda_size ) ) )
return_0 ;
if ( ! dev_read_bytes ( dev , mda_offset , mda_size , buf ) )
goto fail ;
mh = ( struct mda_header * ) buf ;
/*
* To be certain this is really an mda_header before writing it ,
* require that magic , version and start are all correct .
*/
if ( memcmp ( mh - > magic , FMTT_MAGIC , sizeof ( mh - > magic ) ) )
goto fail ;
if ( xlate32 ( mh - > version ) ! = FMTT_VERSION ) {
log_print ( " Skipping mda2 (wrong mda_header.version) " ) ;
goto fail ;
}
if ( xlate64 ( mh - > start ) ! = mda_offset ) {
log_print ( " Skipping mda2 (wrong mda_header.start) " ) ;
goto fail ;
}
/*
* Search text area for an instance of current metadata before enabling
* mda2 , in case this mda_header is from a previous generation PV and
* is not actually used by the current PV . An mda_header and metadata
* area from a previous PV ( in a previous VG ) that used mda2 might
* still exist , while the current PV does not use an mda2 .
*
* Search for the vgid in the first 256 bytes at each 512 byte boundary
* in the first half of the metadata area .
*/
for ( i = 0 ; i < ( mda_size / 1024 ) ; i + + ) {
memcpy ( buf2 , buf + 512 + ( i * 512 ) , sizeof ( buf2 ) ) ;
if ( strstr ( buf2 , mf - > vgid_str ) ) {
log_print ( " Found mda2 header at offset %llu size %llu " ,
( unsigned long long ) mda_offset , ( unsigned long long ) mda_size ) ;
* mda2_offset = mda_offset ;
* mda2_size = mda_size ;
found = 1 ;
break ;
2019-11-04 22:38:23 +03:00
}
2019-10-30 00:08:43 +03:00
}
if ( ! found ) {
log_print ( " Skipping mda2 (no matching VG UUID in metadata area) " ) ;
goto fail ;
}
free ( buf ) ;
return 1 ;
fail :
free ( buf ) ;
* mda2_offset = 0 ;
* mda2_size = 0 ;
return 0 ;
}
/*
* pvck - - repairtype pv_header - - file input - - settings
*
* Writes new pv_header and label_header .
*
* pv_header . pv_uuid
* If a uuid is given in - - settings , that is used .
* Else if existing pv_header has a valid uuid , that is used .
* Else if the metadata file has a matching device name , that uuid is used .
*
* pv_header . device_size
* Use device size from metadata file .
*
* pv_header . disk_locn [ 0 ] . offset ( data area start )
* Use pe_start from metadata file .
*
* pv_header . disk_locn [ 2 ] . offset / size ( first metadata area )
* offset always 4096. size is pe_start - offset .
*
* pv_header . disk_locn [ 3 ] . offset / size ( second metadata area )
* Look for existing mda_header at expected offset , and if
* found use that value . Otherwise second mda is not used .
*
* The size / offset variables in sectors have a _sectors suffix ,
* any other size / offset variables in bytes .
*/
static int _repair_pv_header ( struct cmd_context * cmd , const char * repair ,
struct settings * set , struct metadata_file * mf ,
uint64_t labelsector , struct device * dev )
{
char head_buf [ 512 ] ;
int8_t pvid [ ID_LEN + 1 ] ;
struct device * dev_with_pvid = NULL ;
struct label_header * lh ;
struct pv_header * pvh ;
struct pv_header_extension * pvhe ;
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
uint64_t lh_offset ; /* in bytes, from start of disk */
uint64_t device_size = 0 ; /* in bytes, as stored in pv_header */
uint64_t device_size_sectors = 0 ; /* in sectors, as stored in metadata */
uint64_t get_size_sectors = 0 ; /* in sectors, as dev_get_size returns */
uint64_t get_size = 0 ; /* in bytes */
uint64_t pe_start_sectors ; /* in sectors, as stored in metadata */
uint64_t data_offset ; /* in bytes, as stored in pv_header */
uint32_t head_crc ;
2019-12-02 20:16:02 +03:00
int mda_count = 0 ;
2019-10-30 00:08:43 +03:00
int found_label = 0 ;
int di ;
memset ( & pvid , 0 , ID_LEN + 1 ) ;
lh_offset = labelsector * 512 ; /* from start of disk */
if ( ! dev_get_size ( dev , & get_size_sectors ) )
log_warn ( " WARNING: Cannot get device size. " ) ;
get_size = get_size_sectors < < SECTOR_SHIFT ;
2020-03-03 01:26:44 +03:00
_dump_label_and_pv_header ( cmd , labelsector , dev , NULL , 0 , & found_label ,
2019-10-30 00:08:43 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) ;
/*
* The header sector may have been zeroed , or the user may have
* accidentally given the wrong device .
*/
if ( ! found_label )
log_warn ( " WARNING: No LVM label found on %s. It may not be an LVM device. " , dev_name ( dev ) ) ;
/*
* The PV may have had no metadata areas , or one , or two .
*
* Try to avoid writing new metadata areas where they didn ' t exist
* before . Writing mda1 when it didn ' t exist previously would not be
* terrible since the space is unused anyway , but wrongly writing mda2
* could end up in the data area .
*
* When the pv_header has no mda1 or mda2 locations , check for evidence
* of prior mda headers for mda1 and mda2 .
*
* When the pv_header has an mda1 location and no mda2 location , just
* use mda1 and don ' t look for mda2 ( unless requested by user setting )
* since it probably did not exist . ( It ' s very unlikely that only the
* mda2 location was zeroed in the pv_header . )
*/
if ( ! mda_count & & ! mda1_offset & & ! mda2_offset ) {
if ( _check_for_mda1 ( cmd , dev ) )
mda_count = 1 ;
if ( _check_for_mda2 ( cmd , dev , get_size , mf , & mda2_offset , & mda2_size ) )
mda_count = 2 ;
}
/*
* The PV may have had zero metadata areas ( not common ) , or the
* pv_header and the mda1 header at 4096 may have been zeroed
* ( more likely ) . Ask the user if metadata in mda1 should be
* included ; it would usually be yes . To repair a PV and use
* zero metadata areas , require the user to specify
* - - settings " mda_offset=0 mda_size=0 " .
*
* NOTE : mda1 is not written by repair pv_header , this will only
* include a pointer to mda1 in the pv_header so that a subsequent
* repair metadata will use that to write an mda_header and metadata .
*/
if ( ! mda_count & & set - > mda_offset_set & & set - > mda_size_set & &
! set - > mda_offset & & ! set - > mda_size ) {
log_warn ( " WARNING: PV will have no metadata with zero metadata areas. " ) ;
} else if ( ! mda_count ) {
log_warn ( " WARNING: no previous metadata areas found on device. " ) ;
if ( arg_count ( cmd , yes_ARG ) | |
yes_no_prompt ( " Should a metadata area be included? " ) = = ' y ' ) {
/* mda1_offset/mda1_size are set below */
mda_count = 1 ;
} else {
log_error ( " To repair with zero metadata areas, use --settings \" mda_offset=0 mda_size=0 \" . " ) ;
goto fail ;
}
}
/*
* The user has provided offset or size for mda2 . This would
* usually be done when these values do not exist on disk ,
* but if mda2 * is * found on disk , ensure it agrees with the
* user ' s setting .
*/
if ( mda_count & & ( set - > mda2_offset_set | | set - > mda2_size_set ) ) {
if ( mda2_offset & & ( mda2_offset ! = set - > mda2_offset ) ) {
log_error ( " mda2_offset setting %llu does not match mda2_offset found on disk %llu. " ,
( unsigned long long ) set - > mda2_offset , ( unsigned long long ) mda2_offset ) ;
goto fail ;
}
if ( mda2_size & & ( mda2_size ! = set - > mda2_size ) ) {
log_error ( " mda2_size setting %llu does not match mda2_size found on disk %llu. " ,
( unsigned long long ) set - > mda2_size , ( unsigned long long ) mda2_size ) ;
goto fail ;
}
mda2_offset = set - > mda2_offset ;
mda2_size = set - > mda2_size ;
mda_count = 2 ;
}
/*
* The header sector is read into this buffer .
* This same buffer is modified and written back .
*/
if ( ! dev_read_bytes ( dev , lh_offset , 512 , head_buf ) ) {
log_error ( " Failed to read label_header at %llu " , ( unsigned long long ) lh_offset ) ;
goto fail ;
}
lh = ( struct label_header * ) head_buf ;
pvh = ( struct pv_header * ) ( head_buf + 32 ) ;
/*
* Metadata file is not needed if user provides pvid / device_size / data_offset .
* All values in settings are in bytes .
*/
if ( set - > device_size_set & & set - > pvid_set & & set - > data_offset_set & & ! mf - > filename ) {
device_size = set - > device_size ;
pe_start_sectors = set - > data_offset > > SECTOR_SHIFT ;
memcpy ( & pvid , & set - > pvid , ID_LEN ) ;
if ( get_size & & ( get_size ! = device_size ) ) {
log_warn ( " WARNING: device_size setting %llu bytes does not match device size %llu bytes. " ,
( unsigned long long ) set - > device_size , ( unsigned long long ) get_size ) ;
}
goto scan ;
}
if ( ! mf - > filename ) {
log_error ( " Metadata input file is needed for pv_header info. " ) ;
log_error ( " See pvck --dump to locate and create a metadata file. " ) ;
goto fail ;
}
/*
* Look in the provided copy of VG metadata for info that determines
* pv_header fields .
*
* pv < N > {
* id = < uuid >
* device = < path > # device path hint , set when metadata was last written
* . . .
* dev_size = < num > # in 512 sectors
* pe_start = < num > # in 512 sectors
* }
*
* Select the right pv entry by matching an existing pv uuid , or the
* current device name to the device path hint . Take the pv uuid ,
* dev_size and pe_start from the metadata to use in the pv_header .
*/
if ( ! _get_pv_info_from_metadata ( cmd , set , dev , pvh , found_label ,
mf - > text_buf , mf - > text_size , ( char * ) & pvid ,
& device_size_sectors , & pe_start_sectors ) )
goto fail ;
/*
* In pv_header , device_size is bytes , but in metadata dev_size is in sectors .
*/
device_size = device_size_sectors < < SECTOR_SHIFT ;
scan :
/*
* Read all devs to verify the pvid that will be written does not exist
* on another device .
*/
if ( ! label_scan_for_pvid ( cmd , ( char * ) & pvid , & dev_with_pvid ) ) {
log_error ( " Failed to scan devices to check PV UUID. " ) ;
goto fail ;
}
if ( dev_with_pvid & & ( dev_with_pvid ! = dev ) ) {
log_error ( " Cannot use PV UUID %s which exists on %s " , ( char * ) & pvid , dev_name ( dev_with_pvid ) ) ;
goto fail ;
}
/*
* Set new label_header and pv_header fields .
*/
/* set label_header (except crc) */
memcpy ( lh - > id , LABEL_ID , sizeof ( lh - > id ) ) ;
memcpy ( lh - > type , LVM2_LABEL , sizeof ( lh - > type ) ) ;
lh - > sector_xl = xlate64 ( labelsector ) ;
lh - > offset_xl = xlate32 ( 32 ) ;
/* set pv_header */
memcpy ( pvh - > pv_uuid , & pvid , ID_LEN ) ;
pvh - > device_size_xl = xlate64 ( device_size ) ;
/* set data area location */
data_offset = ( pe_start_sectors < < SECTOR_SHIFT ) ;
pvh - > disk_areas_xl [ 0 ] . offset = xlate64 ( data_offset ) ;
pvh - > disk_areas_xl [ 0 ] . size = 0 ;
/* set end of data areas */
pvh - > disk_areas_xl [ 1 ] . offset = 0 ;
pvh - > disk_areas_xl [ 1 ] . size = 0 ;
di = 2 ;
/* set first metadata area location */
if ( mda_count > 0 ) {
mda1_offset = 4096 ;
mda1_size = ( pe_start_sectors < < SECTOR_SHIFT ) - 4096 ;
pvh - > disk_areas_xl [ di ] . offset = xlate64 ( mda1_offset ) ;
pvh - > disk_areas_xl [ di ] . size = xlate64 ( mda1_size ) ;
di + + ;
}
/* set second metadata area location */
if ( mda_count > 1 ) {
pvh - > disk_areas_xl [ di ] . offset = xlate64 ( mda2_offset ) ;
pvh - > disk_areas_xl [ di ] . size = xlate64 ( mda2_size ) ;
di + + ;
}
/* set end of metadata areas */
pvh - > disk_areas_xl [ di ] . offset = 0 ;
pvh - > disk_areas_xl [ di ] . size = 0 ;
di + + ;
/* set pv_header_extension */
pvhe = ( struct pv_header_extension * ) ( ( char * ) pvh + sizeof ( struct pv_header ) + ( di * sizeof ( struct disk_locn ) ) ) ;
pvhe - > version = xlate32 ( PV_HEADER_EXTENSION_VSN ) ;
pvhe - > flags = xlate32 ( PV_EXT_USED ) ;
pvhe - > bootloader_areas_xl [ 0 ] . offset = 0 ;
pvhe - > bootloader_areas_xl [ 0 ] . size = 0 ;
head_crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) & lh - > offset_xl ,
LABEL_SIZE - ( ( uint8_t * ) & lh - > offset_xl - ( uint8_t * ) lh ) ) ;
/* set label_header crc (last) */
lh - > crc_xl = xlate32 ( head_crc ) ;
/*
* Write the updated header sector .
*/
log_print ( " Writing label_header.crc 0x%08x pv_header uuid %s device_size %llu " ,
head_crc , ( char * ) & pvid , ( unsigned long long ) device_size ) ;
log_print ( " Writing data_offset %llu mda1_offset %llu mda1_size %llu mda2_offset %llu mda2_size %llu " ,
( unsigned long long ) data_offset ,
( unsigned long long ) mda1_offset ,
( unsigned long long ) mda1_size ,
( unsigned long long ) mda2_offset ,
( unsigned long long ) mda2_size ) ;
if ( arg_is_set ( cmd , test_ARG ) ) {
log_warn ( " Skip writing in test mode. " ) ;
return 1 ;
}
if ( ! arg_count ( cmd , yes_ARG ) & &
yes_no_prompt ( " Write new LVM header to %s? " , dev_name ( dev ) ) = = ' n ' )
goto fail ;
if ( ! dev_write_bytes ( dev , lh_offset , 512 , head_buf ) ) {
log_error ( " Failed to write new header " ) ;
goto fail ;
}
return 1 ;
fail :
return 0 ;
}
/* all sizes and offsets in bytes */
static int _update_mda ( struct cmd_context * cmd , struct metadata_file * mf , struct device * dev ,
int mda_num , uint64_t mda_offset , uint64_t mda_size )
{
2020-09-01 22:08:12 +03:00
char buf [ 512 ] ;
2019-10-30 00:08:43 +03:00
struct mda_header * mh ;
struct raw_locn * rlocn0 , * rlocn1 ;
uint64_t max_size ;
uint64_t text_offset ;
uint32_t crc ;
max_size = ( ( mda_size - 512 ) / 2 ) - 512 ;
if ( mf - > text_size > mda_size ) {
log_error ( " Metadata text %llu too large for mda_size %llu max %llu " ,
( unsigned long long ) mf - > text_size ,
( unsigned long long ) mda_size ,
( unsigned long long ) max_size ) ;
goto fail ;
}
2020-09-01 22:08:12 +03:00
if ( ! dev_read_bytes ( dev , mda_offset , sizeof ( buf ) , buf ) ) {
2019-10-30 00:08:43 +03:00
log_print ( " CHECK: failed to read mda_header_%d at %llu " ,
mda_num , ( unsigned long long ) mda_offset ) ;
goto fail ;
}
text_offset = mda_offset + 512 ;
mh = ( struct mda_header * ) buf ;
memcpy ( mh - > magic , FMTT_MAGIC , sizeof ( mh - > magic ) ) ;
mh - > version = xlate32 ( FMTT_VERSION ) ;
mh - > start = xlate64 ( mda_offset ) ;
mh - > size = xlate64 ( mda_size ) ;
rlocn0 = mh - > raw_locns ;
rlocn0 - > flags = 0 ;
rlocn0 - > offset = xlate64 ( 512 ) ; /* text begins 512 from start of mda_header */
rlocn0 - > size = xlate64 ( mf - > text_size ) ;
rlocn0 - > checksum = xlate32 ( mf - > text_crc ) ;
rlocn1 = ( struct raw_locn * ) ( ( char * ) mh - > raw_locns + 24 ) ;
rlocn1 - > flags = 0 ;
rlocn1 - > offset = 0 ;
rlocn1 - > size = 0 ;
rlocn1 - > checksum = 0 ;
crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) mh - > magic ,
MDA_HEADER_SIZE - sizeof ( mh - > checksum_xl ) ) ;
mh - > checksum_xl = xlate32 ( crc ) ;
log_print ( " Writing metadata at %llu length %llu crc 0x%08x mda%d " ,
( unsigned long long ) ( mda_offset + 512 ) ,
( unsigned long long ) mf - > text_size , mf - > text_crc , mda_num ) ;
log_print ( " Writing mda_header at %llu mda%d " ,
( unsigned long long ) mda_offset , mda_num ) ;
if ( arg_is_set ( cmd , test_ARG ) ) {
log_warn ( " Skip writing in test mode. " ) ;
return 1 ;
}
if ( ! arg_count ( cmd , yes_ARG ) & &
yes_no_prompt ( " Write new LVM metadata to %s? " , dev_name ( dev ) ) = = ' n ' )
goto fail ;
if ( ! dev_write_bytes ( dev , text_offset , mf - > text_size , mf - > text_buf ) ) {
log_error ( " Failed to write new mda text " ) ;
goto fail ;
}
if ( ! dev_write_bytes ( dev , mda_offset , 512 , buf ) ) {
log_error ( " Failed to write new mda header " ) ;
goto fail ;
}
return 1 ;
fail :
return 0 ;
}
/*
* pvck - - repairtype metadata - - file input - - settings
*
* Writes new metadata into the text area and writes new
* mda_header for it . Requires valid mda locations in pv_header .
* Metadata is written immediately after mda_header .
*
* all sizes and offsets in bytes
*/
static int _repair_metadata ( struct cmd_context * cmd , const char * repair ,
struct settings * set , struct metadata_file * mf ,
uint64_t labelsector , struct device * dev )
{
uint64_t mda1_offset = 0 , mda1_size = 0 , mda2_offset = 0 , mda2_size = 0 ; /* bytes */
int found_label = 0 ;
int mda_count = 0 ;
int mda_num ;
int bad = 0 ;
mda_num = set - > mda_num ;
if ( ! mf - > filename ) {
log_error ( " Metadata input file is required. " ) ;
return 0 ;
}
2020-03-03 01:26:44 +03:00
_dump_label_and_pv_header ( cmd , labelsector , dev , NULL , 0 , & found_label ,
2019-10-30 00:08:43 +03:00
& mda1_offset , & mda1_size , & mda2_offset , & mda2_size , & mda_count ) ;
if ( ! found_label ) {
log_error ( " No lvm label found on device. " ) ;
log_error ( " See --repairtype pv_header to repair headers. " ) ;
return 0 ;
}
if ( ! mda_count & & set - > mda_offset_set & & set - > mda_size_set & &
! set - > mda_offset & & ! set - > mda_size ) {
log_print ( " No metadata areas on device to repair. " ) ;
return 1 ;
}
if ( ! mda_count ) {
log_error ( " No metadata areas found on device. " ) ;
log_error ( " See --repairtype pv_header to repair headers. " ) ;
return 0 ;
}
if ( ( mda_num = = 1 ) & & ! mda1_offset ) {
log_error ( " No mda1 offset found. " ) ;
log_error ( " See --repairtype pv_header to repair headers. " ) ;
return 0 ;
}
if ( ( mda_num = = 2 ) & & ! mda2_offset ) {
log_error ( " No mda2 offset found. " ) ;
log_error ( " See --repairtype pv_header to repair headers. " ) ;
return 0 ;
}
if ( ( ! mda_num | | mda_num = = 1 ) & & mda1_offset ) {
if ( ! _update_mda ( cmd , mf , dev , 1 , mda1_offset , mda1_size ) )
bad + + ;
}
if ( ( ! mda_num | | mda_num = = 2 ) & & mda2_offset ) {
if ( ! _update_mda ( cmd , mf , dev , 2 , mda2_offset , mda2_size ) )
bad + + ;
}
if ( bad )
return 0 ;
return 1 ;
}
static void _strip_backup_line ( char * line1 , int len1 , char * line2 , int * len2 )
{
int copying = 0 ;
int i , j = 0 ;
for ( i = 0 ; i < len1 ; i + + ) {
if ( line1 [ i ] = = ' \0 ' )
break ;
if ( line1 [ i ] = = ' \n ' )
break ;
/* omit tabs at start of line */
if ( ! copying & & ( line1 [ i ] = = ' \t ' ) )
continue ;
/* omit tabs and comment at end of line (can tabs occur without comment?) */
if ( copying & & ( line1 [ i ] = = ' \t ' ) & & strchr ( line1 + i , ' # ' ) )
break ;
copying = 1 ;
line2 [ j + + ] = line1 [ i ] ;
}
line2 [ j + + ] = ' \n ' ;
* len2 = j ;
}
# define MAX_META_LINE 4096
/* all sizes and offsets in bytes */
static int _backup_file_to_raw_metadata ( char * back_buf , uint64_t back_size ,
char * * text_buf_out , uint64_t * text_size_out )
{
char line [ MAX_META_LINE ] ;
char line2 [ MAX_META_LINE ] ;
char * p , * text_buf ;
2019-12-02 20:16:02 +03:00
uint32_t text_pos , pre_len = 0 , back_pos , text_max ;
2019-10-30 00:08:43 +03:00
int len , len2 , vgnamelen ;
text_max = back_size * 2 ;
2019-11-27 20:17:15 +03:00
if ( ! ( text_buf = zalloc ( text_max ) ) )
2019-10-30 00:08:43 +03:00
return_0 ;
p = back_buf ;
text_pos = 0 ;
back_pos = 0 ;
while ( 1 ) {
if ( back_pos > = back_size )
break ;
memset ( line , 0 , sizeof ( line ) ) ;
len = 0 ;
2020-02-28 20:20:27 +03:00
_copy_line ( p , line , & len , sizeof ( line ) - 1 ) ;
2019-10-30 00:08:43 +03:00
p + = len ;
back_pos + = len ;
if ( len < 3 )
continue ;
if ( _check_vgname_start ( line , & vgnamelen ) ) {
/* vg name is first line of text_buf */
memcpy ( text_buf , line , len ) ;
text_pos = len ;
pre_len = back_pos - len ;
break ;
}
}
while ( 1 ) {
if ( back_pos > = back_size )
break ;
memset ( line , 0 , sizeof ( line ) ) ;
memset ( line2 , 0 , sizeof ( line2 ) ) ;
len = 0 ;
len2 = 0 ;
2020-02-28 20:20:27 +03:00
_copy_line ( p , line , & len , sizeof ( line ) - 1 ) ;
2019-10-30 00:08:43 +03:00
if ( line [ 0 ] = = ' \0 ' )
break ;
p + = len ;
back_pos + = len ;
/* shouldn't happen */
2019-12-02 20:16:02 +03:00
if ( text_pos + len > text_max ) {
free ( text_buf ) ;
2019-10-30 00:08:43 +03:00
return_0 ;
2019-12-02 20:16:02 +03:00
}
2019-10-30 00:08:43 +03:00
if ( len = = 1 ) {
text_buf [ text_pos + + ] = ' \n ' ;
continue ;
}
_strip_backup_line ( line , len , line2 , & len2 ) ;
memcpy ( text_buf + text_pos , line2 , len2 ) ;
text_pos + = len2 ;
}
/* shouldn't happen */
2019-12-02 20:16:02 +03:00
if ( text_pos + pre_len + 3 > text_max ) {
free ( text_buf ) ;
2019-10-30 00:08:43 +03:00
return_0 ;
2019-12-02 20:16:02 +03:00
}
2019-10-30 00:08:43 +03:00
2019-12-02 20:16:02 +03:00
if ( pre_len ) {
/* copy first pre_len bytes of back_buf into text_buf */
memcpy ( text_buf + text_pos , back_buf , pre_len ) ;
text_pos + = pre_len ;
}
2019-10-30 00:08:43 +03:00
text_pos + + ; /* null termination */
* text_size_out = text_pos ;
* text_buf_out = text_buf ;
return 1 ;
}
static int _is_backup_file ( struct cmd_context * cmd , char * text_buf , uint64_t text_size )
{
if ( ( text_buf [ 0 ] = = ' # ' ) & & ! strncmp ( text_buf , " # Generated " , 11 ) )
return 1 ;
return 0 ;
}
/* all sizes and offsets in bytes */
static int _dump_backup_to_raw ( struct cmd_context * cmd , struct settings * set )
{
const char * input = set - > backup_file ;
const char * tofile = NULL ;
struct stat sb ;
char * back_buf , * text_buf ;
uint64_t back_size , text_size ;
2019-12-02 20:16:02 +03:00
int fd , rv , ret ;
2019-10-30 00:08:43 +03:00
if ( arg_is_set ( cmd , file_ARG ) ) {
if ( ! ( tofile = arg_str_value ( cmd , file_ARG , NULL ) ) )
return_0 ;
}
if ( ! input ) {
log_error ( " Set backup file in --settings backup_file=path " ) ;
return 0 ;
}
2019-12-02 20:16:02 +03:00
if ( ( fd = open ( input , O_RDONLY ) ) < 0 ) {
2019-10-30 00:08:43 +03:00
log_error ( " Cannot open file: %s " , input ) ;
return 0 ;
}
if ( fstat ( fd , & sb ) ) {
log_error ( " Cannot access file: %s " , input ) ;
2019-12-02 20:16:02 +03:00
goto fail_close ;
2019-10-30 00:08:43 +03:00
}
if ( ! ( back_size = ( uint64_t ) sb . st_size ) ) {
log_error ( " Empty file: %s " , input ) ;
2019-12-02 20:16:02 +03:00
goto fail_close ;
2019-10-30 00:08:43 +03:00
}
2019-12-02 20:16:02 +03:00
if ( ! ( back_buf = zalloc ( back_size ) ) )
goto fail_close ;
2019-10-30 00:08:43 +03:00
rv = read ( fd , back_buf , back_size ) ;
if ( rv ! = back_size ) {
log_error ( " Cannot read file: %s " , input ) ;
free ( back_buf ) ;
2019-12-02 20:16:02 +03:00
goto fail_close ;
2019-10-30 00:08:43 +03:00
}
2019-12-02 20:16:02 +03:00
if ( close ( fd ) )
stack ;
2019-10-30 00:08:43 +03:00
if ( ! _is_backup_file ( cmd , back_buf , back_size ) ) {
log_error ( " File does not appear to contain a metadata backup. " ) ;
free ( back_buf ) ;
return 0 ;
}
if ( ! _backup_file_to_raw_metadata ( back_buf , back_size , & text_buf , & text_size ) ) {
free ( back_buf ) ;
return_0 ;
}
if ( ! tofile ) {
log_print ( " --- " ) ;
printf ( " %s \n " , text_buf ) ;
log_print ( " --- " ) ;
} else {
FILE * fp ;
if ( ! ( fp = fopen ( tofile , " wx " ) ) ) {
log_error ( " Failed to create file %s " , tofile ) ;
2019-12-02 20:16:02 +03:00
ret = 0 ;
goto out ;
2019-10-30 00:08:43 +03:00
}
fprintf ( fp , " %s " , text_buf ) ;
if ( fflush ( fp ) )
stack ;
if ( fclose ( fp ) )
stack ;
}
2019-12-02 20:16:02 +03:00
ret = 1 ;
out :
free ( back_buf ) ;
free ( text_buf ) ;
return ret ;
2019-10-30 00:08:43 +03:00
2019-12-02 20:16:02 +03:00
fail_close :
if ( close ( fd ) )
stack ;
return 0 ;
2019-10-30 00:08:43 +03:00
}
/* all sizes and offsets in bytes */
static int _check_metadata_file ( struct cmd_context * cmd , struct metadata_file * mf ,
char * text_buf , int text_size )
{
char * vgid ;
int namelen ;
if ( text_size < NAME_LEN + 1 ) {
log_error ( " Invalid raw text metadata in file. File size is too small. " ) ;
return 0 ;
}
/*
* Using pvck - - dump metadata output redirected to file may be a common
* mistake , so check and warn about that specifically .
*/
if ( isspace ( text_buf [ 0 ] ) & & isspace ( text_buf [ 1 ] ) & & strstr ( text_buf , " --- " ) ) {
log_error ( " Invalid raw text metadata in file. " ) ;
log_error ( " (pvck stdout is not valid input, see pvck -f.) " ) ;
return 0 ;
}
/*
* Using a metadata backup file may be another common mistake .
*/
if ( ( text_buf [ 0 ] = = ' # ' ) & & ! strncmp ( text_buf , " # Generated " , 11 ) ) {
log_error ( " Invalid raw text metadata in file. " ) ;
log_error ( " (metadata backup file is not valid input.) " ) ;
return 0 ;
}
if ( text_buf [ text_size - 1 ] ! = ' \0 ' | |
text_buf [ text_size - 2 ] ! = ' \n ' | |
text_buf [ text_size - 3 ] ! = ' \n ' )
log_warn ( " WARNING: unexpected final bytes of raw metadata, expected \\ n \\ n \\ 0. " ) ;
if ( _check_vgname_start ( text_buf , & namelen ) ) {
if ( ! ( vgid = strstr ( text_buf , " id = " ) ) ) {
log_error ( " Invalid raw text metadata in file. (No VG UUID found.) " ) ;
return 0 ;
}
memcpy ( mf - > vgid_str , vgid + 6 , 38 ) ;
return 1 ;
}
log_warn ( " WARNING: file data does not begin with a VG name and may be invalid. " ) ;
if ( ! arg_count ( cmd , yes_ARG ) & &
yes_no_prompt ( " Write input file data to disk? " ) = = ' n ' ) {
log_error ( " Invalid raw text metadata in file. " ) ;
return 0 ;
}
return 1 ;
}
/* all sizes and offsets in bytes */
static int _read_metadata_file ( struct cmd_context * cmd , struct metadata_file * mf )
{
struct stat sb ;
char * text_buf ;
uint64_t text_size ;
uint32_t text_crc ;
int fd , rv ;
2019-12-02 20:16:02 +03:00
if ( ( fd = open ( mf - > filename , O_RDONLY ) ) < 0 ) {
2019-10-30 00:08:43 +03:00
log_error ( " Cannot open file: %s " , mf - > filename ) ;
return 0 ;
}
if ( fstat ( fd , & sb ) ) {
log_error ( " Cannot access file: %s " , mf - > filename ) ;
2019-12-02 20:16:02 +03:00
goto out ;
2019-10-30 00:08:43 +03:00
}
if ( ! ( text_size = ( uint64_t ) sb . st_size ) ) {
log_error ( " Empty file: %s " , mf - > filename ) ;
2019-12-02 20:16:02 +03:00
goto out ;
2019-10-30 00:08:43 +03:00
}
2019-12-02 20:16:02 +03:00
if ( ! ( text_buf = zalloc ( text_size + 1 ) ) )
goto_out ;
2019-10-30 00:08:43 +03:00
rv = read ( fd , text_buf , text_size ) ;
if ( rv ! = text_size ) {
log_error ( " Cannot read file: %s " , mf - > filename ) ;
free ( text_buf ) ;
2019-12-02 20:16:02 +03:00
goto out ;
2019-10-30 00:08:43 +03:00
}
text_size + = 1 ; /* null terminating byte */
2019-12-02 20:16:02 +03:00
if ( close ( fd ) )
stack ;
2019-10-30 00:08:43 +03:00
if ( _is_backup_file ( cmd , text_buf , text_size ) ) {
char * back_buf = text_buf ;
uint64_t back_size = text_size ;
text_buf = NULL ;
text_size = 0 ;
2019-12-02 20:16:02 +03:00
if ( ! _backup_file_to_raw_metadata ( back_buf , back_size , & text_buf , & text_size ) ) {
free ( back_buf ) ;
2019-10-30 00:08:43 +03:00
return_0 ;
2019-12-02 20:16:02 +03:00
}
free ( back_buf ) ;
2019-10-30 00:08:43 +03:00
}
2019-12-02 20:16:02 +03:00
if ( ! _check_metadata_file ( cmd , mf , text_buf , text_size ) ) {
free ( text_buf ) ;
2019-10-30 00:08:43 +03:00
return_0 ;
2019-12-02 20:16:02 +03:00
}
2019-10-30 00:08:43 +03:00
text_crc = calc_crc ( INITIAL_CRC , ( uint8_t * ) text_buf , text_size ) ;
mf - > text_size = text_size ;
mf - > text_buf = text_buf ;
mf - > text_crc = text_crc ;
return 1 ;
2019-12-02 20:16:02 +03:00
out :
if ( close ( fd ) )
stack ;
return 0 ;
2019-10-30 00:08:43 +03:00
}
int pvck ( struct cmd_context * cmd , int argc , char * * argv )
{
struct settings set ;
struct metadata_file mf ;
2019-12-02 20:16:02 +03:00
struct device * dev = NULL ;
2020-03-03 01:26:44 +03:00
struct devicefile * def = NULL ;
2019-10-30 00:08:43 +03:00
const char * dump , * repair ;
2021-01-23 00:27:05 +03:00
const char * pv_name = " " ;
2019-10-30 00:08:43 +03:00
uint64_t labelsector = 1 ;
int bad = 0 ;
int ret = 0 ;
int i ;
memset ( & set , 0 , sizeof ( set ) ) ;
memset ( & mf , 0 , sizeof ( mf ) ) ;
/*
* By default LVM skips the first sector ( sector 0 ) , and writes
* the label_header in the second sector ( sector 1 ) .
* ( sector size 512 bytes )
*/
if ( arg_is_set ( cmd , labelsector_ARG ) )
labelsector = arg_uint64_value ( cmd , labelsector_ARG , UINT64_C ( 0 ) ) ;
2020-03-03 01:26:44 +03:00
if ( arg_is_set ( cmd , repairtype_ARG ) | | arg_is_set ( cmd , repair_ARG ) ) {
2019-10-30 00:08:43 +03:00
pv_name = argv [ 0 ] ;
2020-09-02 22:21:17 +03:00
clear_hint_file ( cmd ) ;
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
if ( ! setup_device ( cmd , pv_name ) ) {
log_error ( " Failed to set up device %s. " , pv_name ) ;
return ECMD_FAILED ;
}
2020-10-27 23:42:08 +03:00
if ( ! ( dev = dev_cache_get ( cmd , pv_name , NULL ) ) ) {
2020-07-20 20:48:36 +03:00
log_error ( " Cannot use %s: %s. " , pv_name , devname_error_reason ( pv_name ) ) ;
2019-10-30 00:08:43 +03:00
return ECMD_FAILED ;
}
}
2020-03-03 01:26:44 +03:00
if ( arg_is_set ( cmd , dump_ARG ) ) {
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
struct stat sb ;
2020-03-03 01:26:44 +03:00
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
pv_name = argv [ 0 ] ;
2020-03-03 01:26:44 +03:00
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
if ( stat ( pv_name , & sb ) < 0 ) {
log_error ( " Cannot access %s. " , pv_name ) ;
return ECMD_FAILED ;
}
if ( S_ISREG ( sb . st_mode ) )
2020-03-03 01:26:44 +03:00
def = get_devicefile ( pv_name ) ;
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
else if ( S_ISBLK ( sb . st_mode ) ) {
if ( ! setup_device ( cmd , pv_name ) ) {
log_error ( " Failed to set up device %s. " , pv_name ) ;
return ECMD_FAILED ;
}
dev = dev_cache_get ( cmd , pv_name , NULL ) ;
}
2020-03-03 01:26:44 +03:00
if ( ! dev & & ! def ) {
2020-07-20 20:48:36 +03:00
log_error ( " Cannot use %s: %s. " , pv_name , devname_error_reason ( pv_name ) ) ;
2020-03-03 01:26:44 +03:00
return ECMD_FAILED ;
}
}
2019-10-30 00:08:43 +03:00
if ( ! _get_settings ( cmd , & set ) )
return ECMD_FAILED ;
if ( arg_is_set ( cmd , file_ARG ) & & ( arg_is_set ( cmd , repairtype_ARG ) | | arg_is_set ( cmd , repair_ARG ) ) ) {
if ( ! ( mf . filename = arg_str_value ( cmd , file_ARG , NULL ) ) )
return ECMD_FAILED ;
if ( ! _read_metadata_file ( cmd , & mf ) )
return ECMD_FAILED ;
}
2020-10-29 00:50:47 +03:00
label_scan_setup_bcache ( ) ;
2020-10-27 23:42:08 +03:00
if ( dev ) {
char buf [ 4096 ] ;
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
/*
* Check nodata filters including device_id filter ,
* then clear the result so the full filter can be
* checked after reading the dev .
*/
cmd - > filter_nodata_only = 1 ;
if ( ! cmd - > filter - > passes_filter ( cmd , cmd - > filter , dev , NULL ) ) {
log_error ( " Cannot use %s: %s. " , pv_name , dev_filtered_reason ( dev ) ) ;
return ECMD_FAILED ;
}
cmd - > filter_nodata_only = 0 ;
cmd - > filter - > wipe ( cmd , cmd - > filter , dev , NULL ) ;
2020-10-27 23:42:08 +03:00
/*
* This buf is not used , but bcache data is used for subsequent
* reads in the filters and by _read_bytes for other disk structs .
*/
if ( ! dev_read_bytes ( dev , 0 , 4096 , buf ) ) {
log_error ( " Failed to read the first 4096 bytes of device %s. " , dev_name ( dev ) ) ;
return ECMD_FAILED ;
}
if ( ! cmd - > filter - > passes_filter ( cmd , cmd - > filter , dev , NULL ) ) {
log_error ( " Cannot use %s: %s. " , pv_name , dev_filtered_reason ( dev ) ) ;
return ECMD_FAILED ;
}
}
2019-10-30 00:08:43 +03:00
2020-05-15 16:05:39 +03:00
if ( ( dump = arg_str_value ( cmd , dump_ARG , NULL ) ) ) {
2019-10-30 00:08:43 +03:00
cmd - > use_hints = 0 ;
if ( ! strcmp ( dump , " metadata " ) )
2020-03-03 01:26:44 +03:00
ret = _dump_metadata ( cmd , dump , & set , labelsector , dev , def , PRINT_CURRENT , 0 ) ;
2019-10-30 00:08:43 +03:00
else if ( ! strcmp ( dump , " metadata_all " ) )
2020-03-03 01:26:44 +03:00
ret = _dump_metadata ( cmd , dump , & set , labelsector , dev , def , PRINT_ALL , 0 ) ;
2019-10-30 00:08:43 +03:00
else if ( ! strcmp ( dump , " metadata_area " ) )
2020-03-03 01:26:44 +03:00
ret = _dump_metadata ( cmd , dump , & set , labelsector , dev , def , 0 , 1 ) ;
2019-10-30 00:08:43 +03:00
else if ( ! strcmp ( dump , " metadata_search " ) )
2020-03-03 01:26:44 +03:00
ret = _dump_search ( cmd , dump , & set , labelsector , dev , def ) ;
2019-10-30 00:08:43 +03:00
else if ( ! strcmp ( dump , " headers " ) )
2020-03-03 01:26:44 +03:00
ret = _dump_headers ( cmd , dump , & set , labelsector , dev , def ) ;
2019-10-30 00:08:43 +03:00
else if ( ! strcmp ( dump , " backup_to_raw " ) ) {
ret = _dump_backup_to_raw ( cmd , & set ) ;
} else
log_error ( " Unknown dump value. " ) ;
if ( ! ret )
return ECMD_FAILED ;
return ECMD_PROCESSED ;
}
2020-05-15 16:05:39 +03:00
if ( ( repair = arg_str_value ( cmd , repairtype_ARG , NULL ) ) ) {
2019-10-30 00:08:43 +03:00
cmd - > use_hints = 0 ;
if ( ! strcmp ( repair , " label_header " ) )
ret = _repair_label_header ( cmd , repair , & set , labelsector , dev ) ;
else if ( ! strcmp ( repair , " pv_header " ) )
ret = _repair_pv_header ( cmd , repair , & set , & mf , labelsector , dev ) ;
else if ( ! strcmp ( repair , " metadata " ) )
ret = _repair_metadata ( cmd , repair , & set , & mf , labelsector , dev ) ;
else
log_error ( " Unknown repair value. " ) ;
if ( ! ret )
return ECMD_FAILED ;
return ECMD_PROCESSED ;
}
if ( arg_is_set ( cmd , repair_ARG ) ) {
cmd - > use_hints = 0 ;
/* repair is a combination of repairtype pv_header+metadata */
if ( ! _repair_pv_header ( cmd , " pv_header " , & set , & mf , labelsector , dev ) )
return ECMD_FAILED ;
if ( ! _repair_metadata ( cmd , " metadata " , & set , & mf , labelsector , dev ) )
return ECMD_FAILED ;
2019-05-31 22:10:44 +03:00
2019-11-04 22:38:23 +03:00
return ECMD_PROCESSED ;
2019-05-22 22:25:08 +03:00
}
2019-06-06 00:23:23 +03:00
/*
* The old / original form of pvck , which did not do much ,
* but this is here to preserve the historical output .
*/
2018-02-15 20:06:50 +03:00
device usage based on devices file
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
2020-06-23 21:25:41 +03:00
if ( argc = = 1 )
setup_device ( cmd , argv [ 0 ] ) ;
else
setup_devices ( cmd ) ;
2019-06-06 00:23:23 +03:00
for ( i = 0 ; i < argc ; i + + ) {
2018-05-04 01:12:07 +03:00
pv_name = argv [ i ] ;
2019-06-06 00:23:23 +03:00
if ( ! ( dev = dev_cache_get ( cmd , argv [ i ] , cmd - > filter ) ) ) {
2020-07-20 20:48:36 +03:00
log_error ( " Cannot use %s: %s. " , pv_name , devname_error_reason ( pv_name ) ) ;
2018-05-04 01:12:07 +03:00
continue ;
}
2019-10-22 21:28:45 +03:00
if ( ! _dump_found ( cmd , & set , labelsector , dev ) )
2019-06-06 00:23:23 +03:00
bad + + ;
2007-04-26 00:03:16 +04:00
}
2019-06-06 00:23:23 +03:00
if ( bad )
return ECMD_FAILED ;
return ECMD_PROCESSED ;
2007-03-31 01:00:26 +04:00
}