1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-11-05 15:22:42 +03:00
Commit Graph

37 Commits

Author SHA1 Message Date
Zdenek Kabelac
39b7d1ba8f cleanup: typos in comments
Collection of typos in code comments.
Should have no runtime effect.
2024-08-30 16:51:15 +02:00
David Teigland
6cb0b44cd2 filter: remove unused EAGAIN case and flag
The case of filters returning EAGAIN and using the
FILTER_AFTER_SCAN flag is no longer used.
2022-04-06 12:51:34 -05:00
David Teigland
9048565093 devices: rework libudev usage
related to config settings:
  obtain_device_info_from_udev (controls if lvm gets
    a list of devices from readdir /dev or from libudev)
  external_device_info_source (controls if lvm asks
    libudev for device information)

. Make the obtain_device_list_from_udev setting
  affect only the choice of readdir /dev vs libudev.
  The setting no longer controls if udev is used for
  device type checks.

. Change obtain_device_list_from_udev default to 0.
  This helps avoid boot timeouts due to slow libudev
  queries, avoids reported failures from
  udev_enumerate_scan_devices, and avoids delays from
  "device not initialized in udev database" errors.
  Even without errors, for a system booting with 1024 PVs,
  lvm2-pvscan times improve from about 100 sec to 15 sec,
  and the pvscan command from about 64 sec to about 4 sec.

. For external_device_info_source="none", remove all
  libudev device info queries, and use only lvm
  native device info.

. For external_device_info_source="udev", first check
  lvm native device info, then check libudev info.

. Remove sleep/retry loop when attempting libudev
  queries for device info.  udev info will simply
  be skipped if it's not immediately available.

. Only set up a libdev connection if it will be used by
  obtain_device_list_from_udev/external_device_info_source.

. For native multipath component detection, use
  /etc/multipath/wwids.  If a device has a wwid
  matching an entry in the wwids file, then it's
  considered a multipath component.  This is
  necessary to natively detect multipath
  components when the mpath device is not set up.
2021-07-13 11:11:23 -05:00
David Teigland
c74ccd5201 filters: nodata option
When filter_nodata_only is set, a filter that uses
data is skipped.
2020-10-21 16:24:16 -05:00
David Teigland
450f272b31 devices: support printing the filter that rejects a device
Use of this new message function needs to be added
to various commands to improve the output.
2020-10-01 12:00:09 -05:00
David Teigland
19ef399ea7 devs: rename dev_is_md dev_is_md_component
The naming was confusing and misleading since
it it's testing if a device is an md component,
not an md device.
2019-05-21 11:44:39 -05:00
David Teigland
6620dc9475 add device hints to reduce scanning
Save the list of PVs in /run/lvm/hints.  These hints
are used to reduce scanning in a number of commands
to only the PVs on the system, or only the PVs in a
requested VG (rather than all devices on the system.)
2019-01-15 10:23:47 -06:00
David Teigland
a063d2d123 devs: use udev info to improve md component detection
Use udev info to supplement native md component detection.
2018-12-03 12:58:28 -06:00
Peter Rajnoha
cb04b84c79 scan: md metadata version 0.90 is at the end of disk
commit de28637
  scan: use full md filter when md 1.0 devices are present

missed the fact that md superblock version 0.90 also puts
metadata at the end of the device, so the full md filter
needs to be used when either 0.90 or 1.0 is present.
2018-11-29 12:35:54 -06:00
Zdenek Kabelac
06a4a356db cov: avoid selfrecursive inclusion of toolcontext.h 2018-10-15 17:49:44 +02:00
David Teigland
3fd75d1bcd scan: use full md filter when md 1.0 devices are present
The md filter can operate in two native modes:
- normal: reads only the start of each device
- full: reads both the start and end of each device

md 1.0 devices place the superblock at the end of the device,
so components of this version will only be identified and
excluded when lvm uses the full md filter.

Previously, the full md filter was only used in commands
that could write to the device.  Now, the full md filter
is also applied when there is an md 1.0 device present
on the system.  This means the 'pvs' command can avoid
displaying md 1.0 components (at the cost of doubling
the i/o to every device on the system.)

(The md filter can operate in a third mode, using udev,
but this is disabled by default because there have been
problems with reliability of the info returned from udev.)
2018-06-15 12:21:25 -05:00
David Teigland
8eab37593e Add cmd arg to more functions
so that it can be used in the filter code
2018-06-15 11:03:55 -05:00
Joe Thornber
d5da55ed85 device_mapper: remove dbg_malloc.
I wrote dbg_malloc before we had valgrind.  These days there's just
no need.
2018-06-08 13:40:53 +01:00
Joe Thornber
dbba1e9b93 Merge branch 'master' into 2018-05-11-fork-libdm 2018-06-01 13:04:12 +01:00
David Teigland
61583281e5 filters: clarify some parts of md filter
Rename some functions to be consistent with the return values,
and add some comments about how it works.
2018-05-22 14:07:13 -05:00
Joe Thornber
7f97c7ea9a build: Don't generate symlinks in include/ dir
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
2018-05-14 10:30:20 +01:00
David Teigland
57bb46c5e7 filter: use bcache for filter reads
Filters are still applied before any device reading or
the label scan, but any filter checks that want to read
the device are skipped and the device is flagged.

After bcache is populated, but before lvm looks for
devices (i.e. before label scan), the filters are
reapplied to the devices that were flagged above.
The filters will then find the data they need in
bcache.
2018-05-10 16:03:19 -05:00
Zdenek Kabelac
fcbef05aae doc: change fsf address
Hmm rpmlint suggest fsf is using a different address these days,
so lets keep it up-to-date
2016-01-21 12:11:37 +01:00
Peter Rajnoha
00b610e542 filters: do not print [none:nil] as external device info's [source:handler] if "none" source is used
Print [source:handler] in filters' debug messages only if external
device info source other than "none" is used.

$ lvmconfig --type full devices/external_device_info_source
external_device_info_source="none

Before this patch (from the -vvvv log):

filters/filter-usable.c:47         /dev/mapper/test: Skipping: Too small to hold a PV [none:(nil)]
filters/filter-md.c:33         /dev/sdb: Skipping md component device [none:(nil)]
filters/filter-partitioned.c:25         /dev/vda: Skipping: Partition table signature found [none:(nil)]

With this patch applied:

filters/filter-usable.c:44         /dev/mapper/test: Skipping: Too small to hold a PV
filters/filter-md.c:35         /dev/sdb: Skipping md component device
filters/filter-partitioned.c:27         /dev/vda: Skipping: Partition table signature found
2015-09-03 14:19:48 +02:00
Peter Rajnoha
590fbd8961 filter-md: use new 'udev' external device info source to get MD component status
MD components are marked in udev db as:
  ID_FS_TYPE="linux_raid_member"
2015-01-30 13:01:12 +01:00
Alasdair G Kergon
527db4645f gcc: replace #ifdef linux with __linux__ 2013-11-13 13:56:29 +00:00
Alasdair G Kergon
80bcdb93ff filters: check for mpath before opening devs
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.

When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.

Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.

Log each filter initialisation to show sequence.

Avoid duplicate 'Using $device' debug messages.
2013-08-13 23:26:58 +01:00
Peter Rajnoha
c6f48b7c1a refactor: make device type recognition code common for general use
Changes:

- move device type registration out of "type filter" (filter.c)
to a separate and new dev-type.[ch] for common use throughout the code

- the structure for keeping the major numbers detected for available
device types and available partitioning available is stored in
"dev_types" structure now

- move common partitioning detection code to dev-type.[ch] as well
together with other device-related functions bound to dev_types
(see dev-type.h for the interface)

The dev-type interface contains all common functions used to detect
subsystems/device types, signature/superblock recognition code,
type-specific device properties and other common device properties
(bound to dev_types), including partitioning support.

- add dev_types instance to cmd context as cmd->dev_types for common use

- use cmd->dev_types throughout as a central point for providing
information about device types
2013-06-12 12:08:56 +02:00
Alasdair G Kergon
06abb2dd4c logging: classify log_debug messages
Place most log_debug() messages into a class.
2013-01-07 22:30:29 +00:00
Petr Rockai
012d273ede filters: Alwayz zalloc the filter struct.
Not all pointers need to be initialised explicitly that way.
2012-09-26 12:23:34 +02:00
Zdenek Kabelac
286cd2006b cleanup: drop unneeded included header files
This headers were not resolving anything used for compiled .c files.
Remove unused util.c file.
2012-08-23 14:37:20 +02:00
Alasdair Kergon
ec8a4dac46 Fix name in msg in last checkin.
(The problem the last checkin addressed was a segfault in 'pvs -a' if .cache
didn't contain every PV in a VG.)
2010-09-22 01:50:38 +00:00
Alasdair Kergon
a171bb6e85 Track recursive filter iteration to avoid refreshing while in use. (2.02.56) 2010-09-22 01:36:13 +00:00
Alasdair Kergon
08f1ddea6c Use __attribute__ consistently throughout. 2010-07-09 15:34:40 +00:00
Alasdair Kergon
4e9083db10 Fix mirror log name construction during lvconvert. (2.02.30)
Make monitor_dev_for_events recurse through the stack of LVs.
Clean up some more compiler warnings.
Add mirror names test script.
2008-01-31 12:19:36 +00:00
Alasdair Kergon
be6845999b Fix inconsistent licence notices: executables are GPLv2; libraries LGPLv2.1. 2007-08-20 20:55:30 +00:00
Alasdair Kergon
7089e02ce1 Remove unused #defines from filter-md.c. 2006-10-04 16:03:17 +00:00
Alasdair Kergon
2262b32057 Use hash, bitset, malloc, pool from libdevmapper. 2005-10-16 23:03:59 +00:00
Alasdair Kergon
8a9351000e fix a md filter log mesg 2004-11-23 17:45:48 +00:00
Alasdair Kergon
5ab925debf pvcreate wipes md superblocks. (With --uuid or --restorefile it prompts.) 2004-11-19 19:25:07 +00:00
Alasdair Kergon
b2dd0bb1d0 Separate out md superblock detection code. 2004-11-18 20:02:21 +00:00
Alasdair Kergon
01c6121ba5 Set devices/md_component_detection = 1 to ignore devices containing md
superblocks. [Luca Berra]
2004-04-16 16:12:04 +00:00