IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We're refererring to 'activation' all over the code and we're talking
about 'LVs being activated' all the time so let's use 'activation/activate'
everywhere for clarity and consistency (still providing the old
'available' keyword as a synonym for backward compatibility with
existing environments).
Read lvm.conf setting for monitoring for each command. So we should not
activate monitoring if the default compilation is set to monitor during
lvconvert commnads.
Patch also removes check for clustered VG and allows to disable monitoring
for clustered VG with the assumption, the problem with monitoring and dmeventd
flag passing for INGNORE is already fixed.
We want to keep this logic -
when LV is extend - extend the LV by at least given amount,
when LV is reduced - reduce the LV by at most given amount.
So for this the rounding needs to be used.
Current logic which seems to satisfy give rule is to round up all
extent values for LV resize upward except for values with '-' sign
that are round downward.
This patch also fixes the problem when lvextend --use-polices tried
to extend LV the by i.e. 20% - but the resulting 20% were smaller
the extent size thus before this patch no extension happened.
Remove DM_THIN_ERROR_DEVICE_ID from API.
Remove API warning.
Drop code that was using DM_THIN_ERROR_DEVICE_ID (already commented)
Remove debug message which slipped in through some previous commit.
Since activation of pool is now independent on thin activation,
user may do whatever he needs - thought preferable thin should stay alive,
but it it will be found inactivate, update_pool will bring the pool up.
To ensure we properly handle LV cluster locking - explicitely do
not allow to change the availability of the thin pool that is in use
for some thin LV.
As soon as the thin volume is created the only way to activate pool
is via implicit dependency.
Ignore thinpool open count for lv/vgchange operations.
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
Since format instances will use own memory pool, it's necessary to properly
deallocate it. For now, only fid is deallocated. The PV structure itself
still uses cmd mempool mostly, but anytime we'd like to add a mempool
in the struct physical_volume, we can just rename this fn to free_pv and
add the code (like we have free_vg fn for VGs).
While STRIPE_SIZE_LIMIT * 2 is basically UINT_MAX, 32bit integer
value can already overflow durin arg size parsing.
(This really happens in test where --stripesize 4294967291 is used,
in s390x uint overflow and this test is ineffective.)
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
Patch adds extra check for lv_name not being NULL.
Test avoids unneeded strlen call for this case.
Otherwise there is no functional change as test would fail on
size_t comparation even for NULL lv_name (thus there is no risk
of NULL dereference when taking 'true' if branch.
Reported by clang as: Argument with 'nonnull' attribute passed null
Reuse the result of the last strchr() call - make sure, 'st' point is not
null for the next strchr() call.
This is not only undocumented but is is also in violation with --help
documentation.
Using --yes without --force is useful in pvcreate when it detects
old signature.
Allow metadataignore flag to be passed in to pvcreate.
Ideally, more refactoring of the mda allocation / initialization
is warranted, but for now, we just add another parameter to 'add_mda'
to take an existing mda ignored flag. We need to do this or pv_write
loses the state of the mda 'ignored' flag before copying and writing
to disk.
Allow parsing of --vgmetadatacopies for vgcreate. Accept
--metadatacopies as a synonym for --vgmetadatacopies.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a field to struct volume_group to later implement metadata
balancing:
- mda_copies: target # of non-ignored mdas in the VG; default 0 (do
not control pv 'ignore mdas' bit.
This patch just adds the parameter to the structures with the default
values but does not modify any commands. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
As for _process_one_vg() we need similar retry loop for
process_each_lv_in_vg(). This patch retries to process
failed LVs with reopened VGs.
Patch does not add any extra repeated invocations if there is not
found any missing VG during LV processing.
Patch modifes behavior of _process_one_vg().
In the first pass vg_read() collectis for replicator sorted list of
additional VGs during lock_vol().
If any other VG is needed by the replicator and it is not yet opened
then next iteration loop is taken with all collected VGs.
Flag vg->cmd_missing_vgs detects missing VGs.
Patch adds failed_lvnames to the list of parameters for process_each_lv_in_vg().
If the list is not NULL it will be filled with LV names of failing LVs
during function execution.
Application could later reiterate only on failed LVs.
A shortcut for --ignorelockingfailure, --ignoremonitoring, --poll n options
and LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable used all at
once in initialisation scripts (e.g. rc.sysinit or initrd).
There's no need for foreign udev rules to touch LVM reserved devices
(snapshot, pvmove, _mlog, _mimage, _vorigin) even if they happen to
be visible. The same applies for /dev/disk content - no need to create
any content for these devices (and so no need to run any "blkid" etc.).
This also prevents setting any inotify "watch" from udev rules on such
devices that is a source of race conditions (the rules need to honor
DM_UDEV_DISABLE_OTHER_RULES_FLAG for this to work though).
clvmd does not propagate DMEVENTD_MONITOR_IGNORE.
Update get_activation_monitoring_mode() to check if the VG that the
LV is being activated in is clustered. If so, skip it.
Any get_activation_monitoring_mode() error will cause the associated LV
(or VG) to be skipped during activation. Both vgchange_single() and
lvchange_single(), which call get_activation_monitoring_mode(), are
called by their respective process_each_..() method.
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate. Update
lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
the {vg,lv}change man pages.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we pv_read() a device that has an orphan vgname, we might need to scan
the system to be sure this is true. However, if the PV has mdas, there's
no way possible for it to have an orphan vgname unless it is a true orphan.
Some areas of the code were optimized to take advantage of this fact, while
others were not (we would still do the expensive scan if a device had mdas
but had an orphan VG).
This patch unifies the code so that every place we are operating on such
a PV, we skip the expensive scan if there are mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Petr Rockai <prockai@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
where we should not expose internal VG names/uuids (the ones with "#" prefix )through the
interface. Otherwise, we could end up with library users opening internal VGs which will
initiate locking mechanism that won't be cleaned up properly.
"#orphans_{lvm1, lvm2, pool}" names are treated in a special way, they are truncated first
to "orphans" and this is used as a part of the lock name then (e.g. while calling lvm_vg_open()).
When library user calls lvm_vg_close(), the original name "orphans_{lvm1, lvm2, pool}"
is used directly and therefore no unlock occurs.
We should exclude internal VG names and uuids in the lists provided by lvmcache:
lvmcache_get_vgids() and lvmcache_get_vgnames().
Eliminate 'merging_snapshot' from 'struct logical_volume' and just use
'snapshot' for origin lv's reference to the merging snapshot; also set
MERGING in the origin lv's status.
If the vg_read() returned error, no lock was taken,
so always call vg_release().
Otherwise this can happen because of missing FAILED_*:
# vgchange -a y x --ignorelockingfailure
Volume group "x" not found
Internal error: Attempt to unlock unlocked VG x
Rename fill_default_pvcreate_params to pvcreate_params_set_defaults.
Rename pvcreate_validate_restore_params to pvcreate_restore_params_validate.
Rename pvcreate_validate_params to pvcreate_params_validate.
Going forward, we would like to allow users to specify the total
number of metadatacopies in a VG rather than on a per-PV basis. In
order to facilitate that, introduce --pvmetadatacopes to replace
--metadatacopies everywhere. We still allow --metadatacopies for
pv commands, but require --pvmetadatacopies for vg commands.
Eventually we will introduce --vgmetadatacopies. Once we do that,
we should either deprecate --metadatacopies or make it a synonym based
on the command (pvmetadatacopies for pv commands, and vgmetadatacopies
for vg commands). The latter option would likely just require a simple
'strncpy' check against cmd->command->name to qualify the merge_synonym
call.
Update nightly tests to cover the pvmetadatacopies synonym.
Note that this patch is the result of an eariler review comment for
the implicit pvcreate patches. Should apply cleanly on top of the
implicit pvcreate patches (I applied after patch 10/10 in that series).
NOTE: This patch will require --pvmetadatacopies for vgconvert as
--metadatacopies is no longer accepted.
Remove the checks for vg_read_error() in most of the tools callback
functions and instead make the check in _process_one_vg() more general.
In all but vgcfgbackup, we do not want to proceed if we get any error
from vg_read(). In vgcfgbackup's case, we may proceed if the backup
is to proceed with inconsistent VGs. This is a special case though,
and we mark it with the READ_ALLOW_INCONSISTENT flag passed to
process_each_vg (and subsequently to _process_one_vg).
NOTE: More cleanup is needed in the vg_read_error() path cases.
This patch is a start.
In _process_one_vg, we should never proceed if the VG read fails with certain
conditions. If we cannot allocate or construct the volume_group structure,
we should not proceed - this is true regardless of the tool calling the
iterator. In other cases, when the volume group structure is constructed but
there is some error (PVs missing, metadata corrupted, etc), some tools may
want to process the VG while others may not.
Author: Dave Wysochanski <dwysocha@redhat.com>
Fix vg_read() error paths to properly release upon vg_read_error().
Note that in the iterator paths (process_each_*()), we release
inside the iterator so no individual cleanup is needed. However there
are a number of other places we missed the cleanup. Proper cleanup
when vg_read_error() is true should be calling vg_release(vg), since
there should be no locks held if we get an error (except in certain
special cases, which IMO we should work to remove from the code).
Unfortunately the testsuite is unable to detect these types of memory
leaks. Most of them can be easily seen if you try an operation
(e.g. lvcreate) with a volume group that does not exist. Error
message looks like this:
Volume group "vg2" not found
You have a memory leak (not released memory pool):
[0x1975eb8]
You have a memory leak (not released memory pool):
[0x1975eb8]
Author: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 12:32:30 CEST 2009 Petr Rockai <me@mornfall.net>
* Rework the toollib interface (process_each_*) on top of new vg_read.
Rebased 6/26/09 by Dave W.
- Add skipping message to process_each_lv
- Remove inconsistent_t.
Several commands calls process_each_vg() and in provided
callback it explicitly recovers VG if inconsistent.
(vgchange, vgconvert, vgscan)
It means that old VG is released and reread but the function
above (process_one_vg) tries to unlock and release old VG.
Patch moves the repair logic into _process_one_vg() function.
It always tries to read vg (even inconsistent) and then decides
what to do according new defined parameter.
Also patch unifies inconsistent error messages.
The only slight change if for vgremove command, where
it now tries to repair VG before it removes if force arg is given.
(It works similar way before, just the order of operation changed).
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.
Still a few rough edges, but hopefully usable now:
lvcreate -s vg1 -L 100M --virtualoriginsize 1T
If user requests report attribute from PVSEG type
and PV is orphan (or all devices is set), the report
is empty.
Try for example (when only orphan PV are present)
#pvs
#pvs -o +devices
# pvs /dev/sdb1
PV VG Fmt Attr PSize PFree
/dev/sdb1 lvm2 -- 46.58G 46.58G
# pvs -o +devices /dev/sdb1
(no output)
The problem is caused by empty pv->segments list.
Fix it by providing fake segment here (similar to fake structures
in _pvsegs_sub_single() calls.
# pvs -a -o devices
Volume group name (null) has invalid characters
Skipping volume group (null)
...
_pvsegs_sub_single creates fake vg, we need to check
that pv is real here.
Currently PV commands, which performs full device scan, repeatly
re-reads PVs and scans for all devices.
This behaviour can lead to OOM for large VG.
This patch allows using internal metadata cache for pvs & pvdisplay,
so the commands scan the PVs only once.
(We have to use VG_GLOBAL otherwise cache is invalidated on every
VG unlock in process_single PV call.)
If the vg in process_each_segment_in_pv is NULL, the pv struct
can be incomplete (for example lv_segs are not copied in get_pvs()
call).
We need use the new pv from just read-in volume group.
(The same code is in pvdisplay already.)
When reporting explicitly label attributes (pv_uuid for example), we do not
need to read metadata.
This patch separate the label fileds and removes scan_vgs_for_pvs
in process_each_pv() if not needed.
(There should be no user visible change in output.)
In preparation for removing cmd->args.
IMO, it makes more sense to put these accessor functions
in the same location as the static array _the_args.
Next patch will update arg_* functions to use _the_args[]
directly and remove cmd->args.
The new error checking code caught some commands that were returning '0' as
an exit status for success. This is incorrect and resulted in a benign error
message displayed (see below). As of today, all commands should return a
value defined in lib/commands/errors.h (1-5). This results in an exit code of
0 on success, or > 0 on failure (as stated in the lvm.8 man page).
Before change:
1. Make sure no PVs are on the system
2. Run 'pvs'
Command failed with status code 0.
After change:
<no output>
Specific test case:
1. pvcreate /dev/loop1; vgcreate vg1 /dev/loop1; lvcreate -L 64M -n lv1 vg1
2. vgremove vg1 (will prompt user)
3. CTRL-C
Code will exit with:
Do you really want to remove volume group "vg2" containing 2 logical volumes? [y/n]:
Volume group "vg2" not removed
Command failed with status code 5.
Internal error: Volume Group vg2 was not unlocked
Device '/dev/loop1' has been left open.
After change:
Do you really want to remove volume group "vg2" containing 2 logical volumes? [y/n]:
Volume group "vg2" not removed
Command failed with status code 5.
Fix missing VG unlocks in some pvchange error paths.
Add some missing validation of VG names.
Rename validate_vg_name() to validate_new_vg_name().
Change orphan lock to VG_ORPHANS.
Change format1 to use ORPHAN as orphan VG name.
* tools/toollib.c (xstrtouint32): New function.
(_parse_pes): Use xstrtouint32; don't cast strtoul's unsigned
long to uint32_t. Detect overflow.
Author: Jim Meyering <jim@meyering.net>
e.g. lvcreate -l 100%FREE to create an LV using all available space.
lvextend -l 50%LV to increase an LV by 50% of its existing size.
lvcreate -l 20%VG to create an LV using 20% of the total VG size.
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
Clear many compiler warnings (i386) & associated bugs - hopefully without
introducing too many new bugs:-) (Same exercise required for other archs.)
Default compilation has optimisation - or else use ./configure --enable-debug
Lots of changes/very little testing so far => there'll be bugs!
Use 'vgcreate -M text' to create a volume group with its metadata stored
in text files. Text format metadata changes should be reasonably atomic,
with a (basic) automatic recovery mechanism if the system crashes while a
change is in progress.
Add a metadata section to lvm.conf to specify multiple directories if
you want (recommended) to keep multiple copies of the metadata (eg on
different filesystems).
e.g. metadata {
dirs = ["/etc/lvm/metadata1","/usr/local/lvm/metadata2"]
}
Plenty of refinements still in the pipeline.
o #defines for common lock flag combinations
o Try out hyphens instead of colons in device-mapper names - does this
make messages containing filenames easier to read?
struct pv_list {
struct list list;
struct physical_volume pv;
};
to
struct pv_list {
struct list list;
struct physical_volume *pv;
};
o New function in toollib 'create_pv_list', which creates a list of pv's
from a given command line array of pv's.
o Changed lvcreate/extend to use this (fixes lvextend [pv list] bug).
