IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since the type passed LV is changed and content of data detroyed,
query user with prompt to confirm this operation.
Also add a proper wiping of header.
Using '--yes' will skip this prompt:
lvconvert -s --yes vg/lv vg/lvcow
If the lv_info call fails for whatever reason/INFO dm ioctl fails or
the dm driver communication is disabled (--driverloaded n), make
sure we always display "unknown" for LVSINFO fields as that's exactly
what happens - we don't know the state.
Before the patch:
$ lvs -o name,device_open --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
Command failed with status code 5.
With this patch applied:
$ lvs -o name,device_open --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
LV DevOpen
lvol1 unknown
Currently, we have two modes of activation, an unnamed nominal mode
(which I will refer to as "complete") and "partial" mode. The
"complete" mode requires that a volume group be 'complete' - that
is, no missing PVs. If there are any missing PVs, no affected LVs
are allowed to activate - even RAID LVs which might be able to
tolerate a failure. The "partial" mode allows anything to be
activated (or at least attempted). If a non-redundant LV is
missing a portion of its addressable space due to a device failure,
it will be replaced with an error target. RAID LVs will either
activate or fail to activate depending on how badly their
redundancy is compromised.
This patch adds a third option, "degraded" mode. This mode can
be selected via the '--activationmode {complete|degraded|partial}'
option to lvchange/vgchange. It can also be set in lvm.conf.
The "degraded" activation mode allows RAID LVs with a sufficient
level of redundancy to activate (e.g. a RAID5 LV with one device
failure, a RAID6 with two device failures, or RAID1 with n-1
failures). RAID LVs with too many device failures are not allowed
to activate - nor are any non-redundant LVs that may have been
affected. This patch also makes the "degraded" mode the default
activation mode.
The degraded activation mode does not yet work in a cluster. A
new cluster lock flag (LCK_DEGRADED_MODE) will need to be created
to make that work. Currently, there is limited space for this
extra flag and I am looking for possible solutions. One possible
solution is to usurp LCK_CONVERT, as it is not used. When the
locking_type is 3, the degraded mode flag simply gets dropped and
the old ("complete") behavior is exhibited.
There was missing lv_info call for situations where there were
mixed PV/LV segment fields together with LVSINFO fields which
require extra lv_info call for LV device status. This ended up
with NULL lvinfo passed to the field reporting functions, hence
the segfault.
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).
Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.
This makes it easier to use and check lvm reporting command output in scripts.
LVSINFO is exactly the same as existing LVS report type,
but it has the "struct lvinfo" populated in addition for
use - this is useful for fields that display the status
of the LV device itself (e.g. suspended state, tables
present/missing...).
Currently, such properties are reported within the "lv_attr"
field so separation is unnecessary - the "lvinfo" call
to populate the "struct lvinfo" is directly a part of the
field reporting function - _lvstatus_disp/lv_attr_dup.
With upcoming patches, we'd like the lv_attr field bits
to be separated into their own fields. To avoid calling
"lvinfo" fn as many times as there are fields requiring
the "lv_info" structure to be populated while reporting
one row related to one LV, we're separating former LVS
into LVS and LVSINFO report type. With this, there's
just one "lvinfo" call for one report row and LV reporting
fields will take the info needed from this struct then,
hence reusing it and not calling "lvinfo" fn on their own.
Mention parent LV as well as the LV triggering the warning.
Still leaves some confusing cases but its not worth fixing them
at the moment.
(Thin pool inactive but a thin volume active => deactivate thin vol.
Inactive mirror/raid with pvmove in progress => complete pvmove and
active&deactivate mirror/raid.
If new VG already exists it requires some LVs to be inactive
unnecessarily.)
mirror_or_raid_type_requested really checks for mirror type.
Convert macros mirror_or_raid_type_requested() and
snapshot_type_requested() into inline functions.
Since vg_name inside /lib function has already been ignored mostly
except for a few debug prints - make it and official internal API
feature.
vg_name is used only in /tools while the VG is not yet openned,
and when lvresize/lvcreate /lib function is called with VG pointer
already being used, then vg_name becomes irrelevant (it's not been
validated anyway).
So any internal user of lvcreate_params and lvresize_params does not
need to set vg_name pointer and may leave it NULL.
Making "help" and "?" implicit also simplifies code since the
dm_report_init caller (lvm/dmsetup) doesn't need to check on
dm_report_init return whether "help" or "?" was hit while parsing
fields/sort keys in libdevmapper.
The libdevmapper now sets internal "RH_ALREADY_REPORTED" flag
after it reports the "help" or "?" implicit field. Then libdevmapper
itself checks for this flag in dm_report_object and if found,
the actual reporting is skipped (because the "help" implicit field
was reported instead of the actual report).
pvmove can be used to move single LVs by name or multiple LVs that
lie within the specified PV range (e.g. /dev/sdb1:0-1000). When
moving more than one LV, the portions of those LVs that are in the
range to be moved are added to a new temporary pvmove LV. The LVs
then point to the range in the pvmove LV, rather than the PV
range.
Example 1:
We have two LVs in this example. After they were
created, the first LV was grown, yeilding two segments
in LV1. So, there are two LVs with a total of three
segments.
Before pvmove:
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
PV | 000 - 255 | 256 - 511 | 512 - 767 |
-------------------------------------
After pvmove inserts the temporary pvmove LV:
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
pvmove0 | seg 0 | seg 1 | seg 2 |
-------------------------------------
| | |
-------------------------------------
PV | 000 - 255 | 256 - 511 | 512 - 767 |
-------------------------------------
Each of the affected LV segments now point to a
range of blocks in the pvmove LV, which purposefully
corresponds to the segments moved from the original
LVs into the temporary pvmove LV.
The current implementation goes on from here to mirror the temporary
pvmove LV by segment. Further, as the pvmove LV is activated, only
one of its segments is actually mirrored (i.e. "moving") at a time.
The rest are either complete or not addressed yet. If the pvmove
is aborted, those segments that are completed will remain on the
destination and those that are not yet addressed or in the process
of moving will stay on the source PV. Thus, it is possible to have
a partially completed move - some LVs (or certain segments of LVs)
on the source PV and some on the destination.
Example 2:
What 'example 1' might look if it was half-way
through the move.
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
pvmove0 | seg 0 | seg 1 | seg 2 |
-------------------------------------
| | |
| -------------------------
source PV | | 256 - 511 | 512 - 767 |
| -------------------------
| ||
-------------------------
dest PV | 000 - 255 | 256 - 511 |
-------------------------
This update allows the user to specify that they would like the
pvmove mirror created "by LV" rather than "by segment". That is,
the pvmove LV becomes an image in an encapsulating mirror along
with the allocated copy image.
Example 3:
A pvmove that is performed "by LV" rather than "by segment".
--------- ---------
| LV1s0 | | LV2s0 |
--------- ---------
| |
-------------------------
pvmove0 | * LV-level mirror * |
-------------------------
/ \
pvmove_mimage0 / pvmove_mimage1
------------------------- -------------------------
| seg 0 | seg 1 | | seg 0 | seg 1 |
------------------------- -------------------------
| | | |
------------------------- -------------------------
| 000 - 255 | 256 - 511 | | 000 - 255 | 256 - 511 |
------------------------- -------------------------
source PV dest PV
The thing that differentiates a pvmove done in this way and a simple
"up-convert" from linear to mirror is the preservation of the
distinct segments. A normal up-convert would simply allocate the
necessary space with no regard for segment boundaries. The pvmove
operation must preserve the segments because they are the critical
boundary between the segments of the LVs being moved. So, when the
pvmove copy image is allocated, all corresponding segments must be
allocated. The code that merges ajoining segments that are part of
the same LV when the metadata is written must also be avoided in
this case. This method of mirroring is unique enough to warrant its
own definitional macro, MIRROR_BY_SEGMENTED_LV. This joins the two
existing macros: MIRROR_BY_SEG (for original pvmove) and MIRROR_BY_LV
(for user created mirrors).
The advantages of performing pvmove in this way is that all of the
LVs affected can be moved together. It is an all-or-nothing approach
that leaves all LV segments on the source PV if the move is aborted.
Additionally, a mirror log can be used (in the future) to provide tracking
of progress; allowing the copy to continue where it left off in the event
there is a deactivation.
Make dm_report_init_with_selection to accept an argument with an
array of reserved values where each element contains a triple:
{dm report field type, reserved value, array of strings representing this value}
When the selection is parsed, we always check whether a string
representation of some reserved value is not hit and if it is,
we use the reserved value assigned for this string instead of
trying to parse it as a value of certain field type.
This makes it possible to define selections like:
... --select lv_major=undefined (or -1 or unknown or undef or whatever string representations are registered for this reserved value in the future)
... --select lv_read_ahead=auto
... --select vg_mda_copies=unmanaged
With this, each time the field value of certain type is hit
and when we compare it with the selection, we use the proper
value for comparison.
For now, register these reserved values that are used at the moment
(also more descriptive names are used for the values):
const uint64_t _reserved_number_undef_64 = UINT64_MAX;
const uint64_t _reserved_number_unmanaged_64 = UINT64_MAX - 1;
const uint64_t _reserved_size_auto_64 = UINT64_MAX;
{
{DM_REPORT_FIELD_TYPE_NUMBER, _reserved_number_undef_64, {"-1", "undefined", "undef", "unknown", NULL}},
{DM_REPORT_FIELD_TYPE_NUMBER, _reserved_number_unmanaged_64, {"unmanaged", NULL}},
{DM_REPORT_FIELD_TYPE_SIZE, _reserved_size_auto_64, {"auto", NULL}},
NULL
}
Same reserved value of different field types do not collide.
All arrays are null-terminated.
The list of reserved values is automatically displayed within
selection help output:
Selection operands
------------------
...
Reserved values
---------------
-1, undefined, undef, unknown - Reserved value for undefined numeric value. [number]
unmanaged - Reserved value for unmanaged number of metadata copies in VG. [number]
auto - Reserved value for size that is automatically calculated. [size]
Selection operators
-------------------
...
The "<lvm command> -S/--select help" shows help (including list of fields to match against):
...field list here including the field type name...
Selection operands
------------------
field - Reporting field.
number - Non-negative integer value.
size - Floating point value with units specified.
string - Characters quoted by ' or " or unquoted.
string list - Strings enclosed by [ ] and elements delimited by either
"all items must match" or "at least one item must match" operator.
regular expression - Characters quoted by ' or " or unquoted.
Selection operators
-------------------
Comparison operators:
=~ - Matching regular expression.
!~ - Not matching regular expression.
= - Equal to.
!= - Not equal to.
>= - Greater than or equal to.
> - Greater than
<= - Less than or equal to.
< - Less than.
Logical and grouping operators:
&& - All fields must match
, - All fields must match
|| - At least one field must match
# - At least one field must match
! - Logical negation
( - Left parenthesis
) - Right parenthesis
[ - List start
] - List end
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
This makes it easier to check against the fields (following patches for
report selection) and check whether size units are allowed or not
with the field value.
Use NAME_LEN constant to simplify creation of device name.
Since the max size should be already tested in validation,
throw INTERNAL_ERROR if the size of vg/lv is bigger then NAME_LEN.
Let's use the size of origin as the real base for percenta calculation,
and 'silenly' add needed metadata space for snapshot.
So now command 'lvcreate -s -l100%ORIGIN vg/lv' should always create a
snapshot to handle full device overwrite.
Expresing -lXX%LV is not valid for snapshot, but error message for
snapshost case was not complete and missed %ORIGIN.
Also document correct settings for in manpage properly where
it missed %PVS.
While polling for snapshot, detect first the snapshot still
exits. It's valid to have multiple polling threads watching
for the same thing and just 1 can 'win' the finish part.
All others should nicely 'fail'.
If the we are polling an LV due to some sort of conversion and it
becomes inactive, a rather worrisome message is produced, e.g.:
" ABORTING: Mirror percentage check failed."
We can cleanly exit if we do a simple check to see if the LV is
active before performing the check. This eliminates the scary
message.
Internal reporting function cannot handle NULL reporting value,
so ensure there is at least dummy label.
So move dummy_lable from tools/reporter.c and use it for all
report_object() calls in lib/report/report.c.
(Fixes RHBZ 1108394)
Simlify lvm_report_object initialization.
And use ifdefs there, not exposing it in the tool code itself.
Later in the future, we should probably make the PIDFILE and
daemon checking code available also in case the daemon itself
is not built.
If the user supplies a '--yes' argument, then don't bother them with
a question to confirm whether to change the cluster attribute (even
if clvmd isn't running).
