IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For example in LVM2, "pv_all" gives all PV fields.
"seg_all" gives all LV segment fields.
"all" gives all fields of the final report type. I think this is more
useful than just adding the current prefix.
So "lvs -o seg_all" gives all the LV segment fields, whilst
"lvs --segments -o all" adds in LV and VG fields too.
"lvs -o all -O vg_name" has report type LVS+VGS so includes all LV and all
VG fields.
Reports the size of the smallest metadata area in a PV or a VG.
Useful to confirm pvcreate --metadatasize or pvmetadatasize setting in
/etc/lvm/lvm.conf file.
NOTE: Actual value in these fields will most always differ from that
given in pvcreate options due to rounding and alignment effects.
There is a rudimentary make file in place so people can build by hand
from 'LVM2/daemons/clogd'. It is not hooked into the main build system
yet. I am checking this in to provide people better access to the
source code.
There is still work to be done to make better use of existing code in
the LVM repository. (list.h could be removed in favor of existing list
implementations, for example. Logging might also be removed in favor
of what is already in the tree.)
I will probably defer updating WHATS_NEW_DM until this code is linked
into the main build system (unless otherwise instructed).
Checks added for DM device names to allow only names < DM_NAME_LEN,
otherwise a part of lengthy name would be silently ignored and could
cause confusion while using dmsetup. Also, the name should not contain
'/' character, if it is used in context of creating a new device
or renaming the existing one (because we do not consider full path
to devices, they do not exist in filesystem yet) and appropriate error
messages are shown.
pvcreate $DEV
vgcreate -s 1k vg_test $DEV
lvcreate -l 1 -n lv1 vg_test
..
/dev/vg_test/lv1: write failed after 1024 of 4096 at 0: No space left on device
Just check for maximum write size in set_lv.
It fails for 1k PE now.
Patch adds log_region_size into allocation habdle struct
and use it in _alloc_parallel_area() for proper log size calculation
instead of hardcoded 1 extent - which can fail.
Reproducer for incorrect log size calculation:
DEV=/dev/sd[bcd]
pvcreate $DEV
vgcreate -s 1k vg_test $DEV
lvcreate -m1 -L 12M -n mirr vg_test
https://bugzilla.redhat.com/show_bug.cgi?id=477040
The log size calculation is mostly copied from kernel code.
Check for major/minor collision is added in _add_dev_to_dtree()
where we already read info by uuid,
so in the case of requesting major/minor it queries device-mapper
by major/minor for device availability.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=204992
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
This allows us to remove one argument from create_toolcontext() and
moves it closer to a generic library init function.
In the arg_*() functions, we just use _the_args() directly.
For now we leave the first parameter to these
arg_*() functions (struct cmd_context *) because
of the number of files involved in removing the
parameter.
In preparation for removing cmd->args.
IMO, it makes more sense to put these accessor functions
in the same location as the static array _the_args.
Next patch will update arg_* functions to use _the_args[]
directly and remove cmd->args.
Problem is dm_report_init() may return NULL and subsequent call to
dm_report_set_output_field_name_prefix() doesn't handle NULL value.
Example:
pvs --nameprefixes --rows --unquoted --noheadings -opv_name,fred
Logical Volume Fields
---------------------
lv_uuid - Unique identifier
lv_name - Name. LVs created for internal use are enclosed in brackets.
...
Physical Volume Segment Fields
------------------------------
pvseg_start - Physical Extent number of start of segment.
pvseg_size - Number of extents in segment.
Unrecognised field: fred
Segmentation fault
Move init_full_scan_done(0) and init_mirror_in_sync(0) from init_lvm()
after call to create_toolcontext() to _init_globals(), called from bottom
of create_toolcontext(). No functional change.
Author: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: James Cameron <james.cameron@hp.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
init_formats() sets up the command formats, and currently sets cmd->fmt_backup
but does not set cmd->fmt to a default value. This seems incorrect so we
set it to cmd->default_settings.fmt before returning.
The call we remove here may set cmd->fmt based on a command line setting.
But it is safe to remove this, because the only caller of init_lvm() that
cares about the cmdline override is the cmdline tools (clvmd does not care),
called from lvm2_main(). After lvm2_main() calls init_lvm(), it later calls
lvm_run_command(). In lvm_run_command(), we have a call to _apply_settings(),
which has the identical assignment of cmd->fmt that this patch removes.
This is very obvious - _init_logging() makes the identical init_msg_prefix()
and init_cmd_name() calls with cmd->default_settings so these calls are
clearly redundant after calling create_toolcontext().
Very similar argument to removal of init_debug() and other calls.
create_toolcontext() calls _process_config() which sets
cmd->default_settings.activation, then calls
set_activation(cmd->default_settings.activation). Later, create_toolcontext()
sets cmd->current_settings = cmd->default_settings. So these calls
set_activation(cmd->current_settings.activation) are redundant.
Identical argument to previous patch which removed archive_enable() calls.
We add a new parameter to backup_init() which sets the enable value based
on the cmd->default_settings.backup value. This value was used to set
cmd->current_settings.backup, used in the removed backup_enable() call.
_init_backup() calls archive_init(), which originally set 'enabled' to
a hardcoded '1' value. This seems incorrect based on my read of other
areas of the code so here we add a 'enabled' paramter to archive_init().
We pass in cmd->default_settings.archive, which is obtained from the
config tree. Later in create_toolcontext, cmd->current_settings is
set to cmd->default_settings. The archive_enable() call we remove
here was using cmd->current_settings to set the 'archive' enable
value. The final value of cmd->archive_params->enabled should thus
be equivalent to the original code.
This one we actually need to move. _init_logging() is called from
create_toolcontext(), which makes this call:
/* Test mode */
cmd->default_settings.test =
find_config_tree_int(cmd, "global/test", 0);
But it does not call init_test(). So we need an init_test() somewhere.
The most logical place is to put it inside _init_logging(), since this
is where the config value is read and default_settings are set. Placing
the init_test() call here matches what is done with other variables and
seems to make sense.
This variable is set at the top of create_toolcontext() to 0.
Nothing later in create_toolcontext() changes the value.
In init_lvm(), nothing between create_toolcontext() call and this assignment
changes the value. Thus, the assignment is redundant.
The rationale for removing init_verbose() call is very similar to removing
init_debug() call. create_toolcontext() calls _init_logging() which
makes these calls:
/* Verbose level for tty output */
cmd->default_settings.verbose =
find_config_tree_int(cmd, "log/verbose", DEFAULT_VERBOSE);
init_verbose(cmd->default_settings.verbose + VERBOSE_BASE_LEVEL);
And being that create_toolcontext() copies default_settings into
current_settings at the bottom, the init_verbose() call we are removing:
init_verbose(cmd->current_settings.verbose + VERBOSE_BASE_LEVEL);
is redundant.
We can safely remove because create_toolcontext() calls _init_logging(),
which makes these calls:
/* Debug level for log file output */
cmd->default_settings.debug =
find_config_tree_int(cmd, "log/level", DEFAULT_LOGLEVEL);
init_debug(cmd->default_settings.debug);
Then at the bottom of create_toolcontext() we do this:
cmd->current_settings = cmd->default_settings;
So the call we are removing from init_lvm() functions (clvmd and lvmcmdline):
init_debug(cmd->current_settings.debug);
Just sets the value of debug based on 'cmd->current_settings.debug'.
Since cmd->current_settings is equivalent to cmd->default_settings, and
init_debug() was called with cmd->default_settings, the call we remove is
redundant.
for losetup, break out of the loop when successful setup of loop device,
and only look at 7 loop devices (default loop module setting)
for blockdev, use old option if new one is not available
with the second vgcreate overwriting the first.
Obtain lock before calling vg_create(), which checks for existence of vgname
and fails if it already exists.
