IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
in clvmd, dmevend, man, tests.
Don't include dependency files for clow and cscope.out targets
Improve dependency tracking for dmeventd and liblvm2cmd sources.
to obtain sources. Create make.tmpl target for
simplier generation of cflow files with the help of
CFLOW_LIST, CFLOW_LIST_TARGET, CFLOW_TARGET.
Still cflow usage is not perfect.
Move daemons/ and lib/ subtargets to their Makefiles so we don't get
double cleanup error during execution of distclean target.
Instead of duplicating clean target inside distclean target,
just use it as a subtarget and avoid add duplicating code.
This check-in enables the 'mirrored' log type. It can be specified
by using the '--mirrorlog' option as follows:
#> lvcreate -m1 --mirrorlog mirrored -L 5G -n lv vg
I've also included a couple updates to the testsuite. These updates
include tests for the new log type, and some fixes to some of the
*lvconvert* tests.
clvmd's do_lock_lv() already properly controls dmeventd monitoring based
on LCK_DMEVENTD_MONITOR_MODE in lock_flags -- though one small fix was
needed for this to work: _lock_for_cluster() must treat
dmeventd_monitor_mode()'s return as a tri-state value.
Also cleanup do_lock_lv() to:
- explicitly init_dmeventd_monitor() based on LCK_DMEVENTD_MONITOR_MODE
- no longer reset init_dmeventd_monitor() to default at the end of
do_lock_lv() -- it is unnecessary
This is the next preparatory step towards better --alloc anywhere
support and is not intended to break anything that currently works so
please report any problems - segfaults, bogus data in the new debug
messages, or if the code now chooses bizarre allocation layouts.
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate. Update
lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
the {vg,lv}change man pages.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we pv_read() a device that has an orphan vgname, we might need to scan
the system to be sure this is true. However, if the PV has mdas, there's
no way possible for it to have an orphan vgname unless it is a true orphan.
Some areas of the code were optimized to take advantage of this fact, while
others were not (we would still do the expensive scan if a device had mdas
but had an orphan VG).
This patch unifies the code so that every place we are operating on such
a PV, we skip the expensive scan if there are mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Petr Rockai <prockai@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
If user try to vgcreate or vgextend non-existent VG,
these messages appears:
# vgcreate xxx /dev/xxx
Internal error: Volume Group xxx was not unlocked
Device /dev/xxx not found (or ignored by filtering).
Unable to add physical volume '/dev/xxx' to volume group 'xxx'.
Internal error: Attempt to unlock unlocked VG xxx.
(the same with existing VG and non-existing PV & vgextend)
# vgextend vg_test /dev/xxx
...
It is caused because code tries to "refresh" cache if
md filter is switched on using cache destroy.
But we can change filters and rescan even without this
machinery now, just use refresh_filters
(and reset md filter afterwards).
(Patch also discovers cache alias bug in vgsplit test,
fix it by using better filter line.)
(VDSO on 32bit is VSyscall on 64bit)
It seems it could be locked on 64bit kernels running 32bit binaries,
but it makes troubles on real 32bit machines where mlock() returns
error when trying to lock such map area. (0xffffe000)
Behavior of mlockall() seems to be similar.
This patch adds a new implementation of locking function instead
of mlockall() that may lock way too much memory (>100MB).
New function instead uses mlock() system call and selectively locks
memory areas from /proc/self/maps trying to avoid locking areas
unused during lock-ed state.
Patch also adds struct cmd_context to all memlock() calls to have
access to configuration.
For backward compatibility functionality of mlockall()
is preserved with "activation/use_mlockall" flag.
As a simple check, locking and unlocking counts the amount of memory
and compares whether values are matching.
Modify linking of readline library. Create new substituted varible
READLINE_LIBS - readline library is linked ONLY with tools that really use
it - i.e. lvm. (Static lvm does not use readlin).
Previous behaviour put this library into the variable LIBS and thus
linked it with all created object files of lvm project (i.e. plugins...).
READLINE detection is simplified.
Termcap library is linked in only if readline library doesn't have its own
dependency (i.e. old distributions).
The kernel's blk_stack_limits() function may flag a device as
'misaligned'. If it does the alignment_offset will be -1.
Update set_pe_align_offset() to accommodate this corner case.
lvm2 devices have always UUID set even if imported from lvm1 metadata.
Patch removes name argument from dev_manager_info call and converts
all activation related calls to use query by UUID.
Also it simplifies mknode call (which is the only user on mknodes parameter).
We need to allocate memory for the tag and copy the tag value before we
add it to the list of tags. We could put this inside lvm2app since the
tools keep their memory around until vg_write/vg_commit is called, but
we put it inside the internal library to minimize code in lvm2app.
We need to copy the tag passed in by the caller to ensure the lifetime of
the memory until the {vg|lv} handle is released.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Similar refactoring to vgchange - pull out common parts and put into
library function for reuse. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Pull out common code to be called from tools as well as lvm2app.
Leave archive() at tool level so we can use from vgcreate
as well as vgchange. Should be no functional change.
- add stack macro in vgchange
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a merging snapshot to the deptree, using the "error" target, rather
than avoid adding it entirely. This allows proper cleanup of the -cow
device without having to rename the -cow to use the origin's name as a
prefix.
Move the preloading of the origin LV, after a merge, from
lv_remove_single() to vg_remove_snapshot(). Having vg_remove_snapshot()
preload the origin allows the -cow device to be released so that it can
be removed via deactivate_lv(). lv_remove_single()'s deactivate_lv()
reliably removes the -cow device because the associated snapshot LV,
that is to be removed when a snapshot-merge completes, is always added
to the deptree (and kernel -- via "error" target).
Now when the snapshot LV is removed both the -cow and -real devices
get removed using uuid rather than device name. This paves the way
for us to switch over to info-by-uuid queries.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Internally we store sizes in sectors, but lvm2app exports sizes
in bytes. We could get fancier and allow units configuration but
this fix should do for now.
Fixes rhbz561422.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
We unfortunately don't yet _know_, in dev_manager_snapshot_percent(), if
a snapshot-merge target is active (activation is deferred if dev is
open); so we can't short-circuit origin devices based purely on existing
LVM LV attributes.
Set 'fail_if_percent_unsupported' in dev_manager_snapshot_percent() for
a merging origin LV, otherwise passing unsupported LV types to _percent
will lead to a default successful return with percent_range as
PERCENT_100.
For a merging origin, PERCENT_100 will result in a polldaemon that runs
infinitely (because completion is PERCENT_0).
When activating a merging origin it is valid, and expected, to not have
a node in the deptree for both the origin and its merging snapshot. The
_cached_info() caller is only concerned with whether a device is open.
If there isn't a node in the tree the associated device is definitely
not open.
where we should not expose internal VG names/uuids (the ones with "#" prefix )through the
interface. Otherwise, we could end up with library users opening internal VGs which will
initiate locking mechanism that won't be cleaned up properly.
"#orphans_{lvm1, lvm2, pool}" names are treated in a special way, they are truncated first
to "orphans" and this is used as a part of the lock name then (e.g. while calling lvm_vg_open()).
When library user calls lvm_vg_close(), the original name "orphans_{lvm1, lvm2, pool}"
is used directly and therefore no unlock occurs.
We should exclude internal VG names and uuids in the lists provided by lvmcache:
lvmcache_get_vgids() and lvmcache_get_vgnames().
In dev_manager_info 0 means error and 1 info is returned,
not that device exists (that value is part of info struct).
Fix query by uuid only (no name) which returns 0 when device
does not exist.
more descriptive message if locking fails instead of
"Locking type -1 initialisation failed."
Use read-only locking instead of misleading ignorelocking option
in message.
All this seems to do is provide a memory leak so remove it.
The only caller of _alloc_pv() later explicitly sets
pv->vg_name = fmt->orphan_vg_name so clearly this allocation
should be removed. I also saw no where in the code where
strncpy was used to assign pv->vg_name - only direct assignments
and strdup's.
merge completes. This narrows the scope of this "hack" (which still
needs a proper fix within the deptree).
This stops dmeventd from trying to access snapshot devices that were
already removed.
For mirror repair (and similar tasks) it can happen that full
device rescan is issued from clvmd.
Because code can be in the middle of repair (calling suspend)
clvmd should never try to scan suspended devices
(otherwise it causes deadlock).
Also code must not change ignore_suspended_device flag when
doing refresh_filters (called from lvmcache scan code).
'const'. Be consistent with its use (and dev_manager_snapshot_percent()).
Pass 'lv' from dev_manager_snapshot_percent() to _percent() to
_percent_run(). _percent_run() always dereferenced 'lv' (when
initializing segh) even though it may have been NULL (as was the case
until now for dev_manager_snapshot_percent()).
If a "snapshot-origin" LV (snapshot-merge whose merge was deferred
becuase it was open) was passed to _percent_run() it would always return
100%.
Update _percent_run() to NOT return PERCENT_100 et. al. if
->target_percent() wasn't ever called and supplied 'lv' is a merging
origin. A default return of 100% does not work for snapshot-merge.
Also tweak a related lvconvert log_error() to include "Aborting merge."
Eliminate 'merging_snapshot' from 'struct logical_volume' and just use
'snapshot' for origin lv's reference to the merging snapshot; also set
MERGING in the origin lv's status.
If either the origin or snapshot that is to be merged is open the merge
will not start; only the merge metadata will be written. The merge will
start on the next activation of the origin (or via lvchange --refresh)
IFF both the origin and snapshot are closed.
Merge on activate is particularly important if we want to merge over a
mounted filesystem that cannot be unmounted (until next boot) --- for
example root.
snapshots are suspended, new origin is created, snapshots are resumed, new
origin is resumed. So it allocates memory while suspended.
To fix it, move vg_commit after suspend_lv, so that the suspend code will
treat it as precommitted vg and will preload new origin prior to suspend.
NOTE: agk doesn't like this "hack"; need to revisit and fix
This is useful for when the snapshot is still active and merging hasn't
started yet; it shows a merge is pending. Once merging starts the
merging snapshot will be hidden but can still be displayed with 'lvs -a'
Report snapshot origin with merging snapshot as 'O' instead of 'o':
Before merge starts this shows that a merge is pending. While merging
the snapshot will be hidden, 'O' enables a user to see that there is a
snapshot merging.
"snapshot-merge" target based on whether the LV is a merging snapshot.
When activating a snapshot-merge target do not attempt to monitor the
LV for events; the polldaemon will monitor the snapshot as it is
merged.
Allow "snapshot-merge" target's usage to be parsed via standard
"snapshot" methods.
NOTE: follow on fixes to the _percent_run change are still needed
Introduces new libdevmapper function dm_tree_node_add_snapshot_merge_target
Verifies that the kernel (dm-snapshot) provides the 'snapshot-merge'
target.
Activate origin LV as snapshot-merge target. Using snapshot-origin
target would be pointless because the origin contains volatile data
while a merge is in progress.
Because snapshot-merge target is activated in place of the
snapshot-origin target it must be resumed after all other snapshots
(just like snapshot-origin does) --- otherwise small window for data
corruption would exist.
Ideally the merging snapshot would not be activated at all but if it is
to be activated (because snapshot was already active) it _must_ be done
after the snapshot-merge. This insures that DM's snapshot-merge target
will perform exception handover in the proper order (new->resume before
old->resume). DM's snapshot-merge does support handover if the reverse
sequence is used (old->resume before new->resume) but DM will fail to
resume the old snapshot; leaving it suspended.
To insure the proper activation sequence dm_tree_activate_children() was
updated to accommodate an additional 'activation_priority' level. All
regular snapshots are 0, snapshot-merge is 1, and merging snapshot is 2.
Make 'merging_snapshot' pointer that points from the origin to the
segment that represents the merging snapshot.
Import/export 'merging_store' metadata.
Do not allow creating snapshots while another snapshot is merging.
Snapshot created in this state would certainly contain invalid data.
NOTE: patches at the end of this series will remove 'merging_snapshot'
and will introduce helpful wrappers and cleanups.
This spurious 'break' has been here since this code was first committed
in June 2005 and stopped the algorithm behaving as described in the
comment above it and rendered the variable 'already_found_one' useless.
1. Found bug in 'redundant log' implementation that caused
problems when converting a linear that spanned multiple
devices to a mirror (wasn't checking for NULL value of
provided parameter in _alloc_parallel_area)
2. Testsuite was failing to perform tests when 'not' modifier
was used. This allowed a couple issues to slip through.
Added a 'not_sh' modifier that negates tests performed by
functions defined in the shell source file.
3. Was initializing a variable to far down, which cause
previously set value to be overridden. (This was the
result of the collision of the "redundant log" and
lvconvert fix patches.)
Upon successful fork(), _become_daemon() must assert that the locks that
are currently held belong to the parent, not the child. All of the
child's internal state saying 'this process holds a lock' has to be
reset.
A proper lvmcache_locking_reset() should follow later.
It is pretty much the same as reducing the number of
mirror legs, but we just don't delete them afterwards.
The following command line interface is enforced:
prompt> lvconvert --splitmirror <n> -n <name> <VG>/<LV>
where 'n' is the number of images to split off, and
where 'name' is the name of the newly split off logical volume.
If more than one leg is split off, a new mirror will be the
result. The newly split off mirror will have a 'core' log.
Example:
[root@bp-01 LVM2]# !lvs
lvs -a -o name,copy_percent,devices
LV Copy% Devices
lv 100.00 lv_mimage_0(0),lv_mimage_1(0),lv_mimage_2(0),lv_mimage_3(0)
[lv_mimage_0] /dev/sdb1(0)
[lv_mimage_1] /dev/sdc1(0)
[lv_mimage_2] /dev/sdd1(0)
[lv_mimage_3] /dev/sde1(0)
[lv_mlog] /dev/sdi1(0)
[root@bp-01 LVM2]# lvconvert --splitmirrors 2 --name split vg/lv /dev/sd[ce]1
Logical volume lv converted.
[root@bp-01 LVM2]# !lvs
lvs -a -o name,copy_percent,devices
LV Copy% Devices
lv 100.00 lv_mimage_0(0),lv_mimage_2(0)
[lv_mimage_0] /dev/sdb1(0)
[lv_mimage_2] /dev/sdd1(0)
[lv_mlog] /dev/sdi1(0)
split 100.00 split_mimage_0(0),split_mimage_1(0)
[split_mimage_0] /dev/sde1(0)
[split_mimage_1] /dev/sdc1(0)
It can be seen that '--splitmirror <n>' is exactly the same
as '--mirrors -<n>' (note the minus sign), except there is the
additional notion to keep the image being detached from the
mirror instead of just throwing it away.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
