IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.
When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.
This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).
This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.
The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
Internally, we used DM names instead of UUIDs while processing event
handlers. This caused problems while trying to vgrename a VG with active LVs
where the names are being changed and so the devices were not found then.
The patch also contains a little bit of refactoring, moving "build_dlid" code
found in dev_manager.c to "build_dm_uuid", now in lvm-string.c (so we have
build_dm_uuid and build_dm_name at one place).
lvm2app needs a link back to the vg in order to use the vg handle for
memory allocations as well as other things. This patch adds the field
to struct physical_volume, and sets pv->vg when reading a vg from disk or
extending a vg by using the helper function previously added,
add_pvl_to_vgs(). Moves and renames are handled with separate code
inside move_pv() and vgmerge(). Add pv->vg check to vg_validate().
A NULL value in pv->vg signifies membership in the orphan VG.
Note though in the case of pv_read() on a device with metadatacopies == 0,
more devices may need to be read for an authoritative answer.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Now that we have library functions to add/delete a pv from the vg->pvs
list, call them from everywhere.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a delete function to manage the vg->pvs list.
NOTE: It may be possible to do further cleanup to these add/del functions
by passing a 'pv' as input instead of 'pv_list'. The pv_list is used for
functions which do allocations (lvcreate) while other places in the code
just manage a list of 'pv' (e.g. import functions, vgextend, etc).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Move the increment of vg->pv_count next to the place where we add to
vg->pvs. It looks safe to do this since the only caller of import_pool_vg()
calls import_pool_pvs() immediately afterward, and there is no way
import_pool_vg() can fail (always returns 1). However, if there's a
memory allocation failure inside import_pool_pvs(), we will end up with
a different count in vg->pv_count that with the original code. In any
case, vg->pv_count should be as close to dm_list_size(&vg->pvs) as
possible, as is the case everywhere else in the code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The dm_list * parameter is unnecessary since we are passing in 'vg'
and the only caller of import_pool_pvs() passes '&vg->pvs' in the
dm_list * parameter. Just use vg->pvs directly in the function.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
A user specifying duplicate paths on the cmdline of vgcreate will
get a message similar to the following:
vgcreate vgtest2 /dev/loop3 /dev/loop5
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop5 not /dev/loop3
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop3 not /dev/loop5
Internal error: Duplicate PV id jk1lXs-Kzwy-OKlX-q6bh-aFFK-MQQ0-6oPgu8 detected for /dev/loop3 in vgtest2.
This is caught by vg_validate(), but it would be good to find
this condition earlier in the vgcreate code. add_pv_to_vg()
currently checks by pvname, but does not look for duplcate pvids.
This patch adds the check for duplicate pvids and results in new
error output as follows:
vgcreate vgtest2 /dev/loop3 /dev/loop5
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop5 not /dev/loop3
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop3 not /dev/loop5
Physical volume '/dev/loop5 (jk1lXs-Kzwy-OKlX-q6bh-aFFK-MQQ0-6oPgu8)' listed more than once.
Unable to add physical volume '/dev/loop5' to volume group 'vgtest2'.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When moving parts of striped LVs, pvmove wouldn't care about leaving you with
two stripes on the same disk. Now --alloc anywhere is needed for that.
(Tried and gave up on two alternative approaches before the one committed here.)
Small refactor of main places in the code where a pv is added to a
vg into a small function which adds the pv to the list and updates
the vg counts.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Refactor adding to the vg->pvs list and incrementing the count, which
will allow further refactoring. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Simple refactor to mov code that updates the vg extent counts from a
single pv's counts close to the code that adds a pv to vg->pvs and
updates vg->pv_count. No functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
In add_pv_to_vg(), we should only add the pv to vg->pvs after all
internal checks have passed. The check for vg->extent_count exeeding
maximum was after we added the pv to the list, so this function could
return a state of vg->pvs that did not reflect other parameters such
as vg->pv_count.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Because we have now strong rule for lock ordering:
- VG locks must be taken in alphabetical order
- ORPHAN locks must be the last
vgs_locked() is now not needed.
This fixes problem with orphan locking, e.g.
vgremove VG1 | vgremove VG2
lock(VG1) | lock(VG2)
lock(ORPHAN) | lock(ORPHAN) -> fail, non-blocking
https://bugzilla.redhat.com/show_bug.cgi?id=578413
(More similar places in code.)
Physical segments were still allocated from global
command context mempool.
This leads to very high memory usage when
activating large VG (vgchange).
(Memory usage was about 2G when >3000LVs).
Fix it by properly using vg->vgmem private pool,
so all the memory is released early.
New memory pool parameter is needed here for pv_split_segment
function.
Also fix the same problem in some minor allocations
(vg description, lv segment split).
In addition to previous patch, we really do not need
to search for segment which was just allocated in
split request.
Make pv_split_segment function return newly allocated
(split) segment also.
(So after this patch, there is only one user
of slow find_peg_by_pe).
The function find_peg_by_pe is incredibly inefficient
for Pvs with many segments.
In shiny future there should be binary (or interval) tree
instead of sorted linked list (volunteers?).
Anyway, for now, we can use dirty trick here to optimise this case:
- Allocations are usually applied from the beginning
of PV (we have no alloocation policy which allocates areas
"backwards")
- The only user of find_peg_by_pe is pv_split_segment()
call. In *most* cases it need to split *last* PV segment.
So if we search sorted pv segment list backwards, we
hit the requested segment immediatelly.
This patch applies this tiny change.
(and saves >30% of processing time when >3000LVs segments are on one PV!)
To discourage using this inefficient function from other code,
it is moved to pv_manip.c and used static for now:-)
vg_validate call is an adept to optimisation, it is very
ineeficient and slow.
Anyway, we should call it only before writing data to disk.
The call in lvmcache was just temporary validation,
we realy do not need to revalidate cached metadata
every time.
(Actually, I added that there just to prove that cache works
properly and forgot to remove it.)
Patch removes it from lvmcache completely, this can hit only
internal bug in export function (and this bug must
be detected in any vg_write call anyway before).
The _read_vg uses already hash for PVs to optimise
reading of large VGs and avoiding repeated PV list traversing.
Use the same aproach to speed up parsing VG with many LVs.
Code moves initilization of stats values to _memlock_maps().
For dmeventd we need to use mlockall() - so avoid reading config value
and go with _use_mlockall code path.
Patch assumes dmeventd uses C locales!
Patch needs the call or memlock_inc_daemon() before memlock_inc()
(which is our common use case).
Some minor code cleanup patch for _un/_lock_mem_if_needed().
