IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For older bashes (i.e. rhel5) code can't use internal bash arrays
and uses old-school greps and sorts to create configuration file.
But the split of value was mismatching names with same prefix
so i.e.
devices/scan
devices/scan_lvs
was matching always the later one - fix this by expecting
whitespace or '=' after the name.
This reverts commit 8623e336513c6ac6fcb24aa7e2ef10b8a3a36c59.
The problem this was avoiding now seems to be fixed by
commit d6bce036155ae973c869bdce3ca5f824f933f599
mirror: fix monitoring change
Since we use 'set -euE -o pipefail' for shell execution,
any failure of any command in the 'piped' shell can result
in failure of whole executed chain - resulting in typically
unsually test skip, that was left unnoticed.
Since checked command have usually short output, the simplest
fix seems to be to let grep parse whole output instead
of quiting after first match.
Commit a8921be641afe865c177e11b8859f4b937f76995 was supposedly a fix
for unwanted table reload - however before final commit, the tiny
change has been made that was believed to be an enhancment
of original prepared patch. Unfortunatelly the function
locking_is_clustered is not meant to be an equivalent test
of original function. Drop this change and using
original patch.
Avoid bug 1711427 in which an exclusively active linear LV in a
clustered VG, when upconverted to a mirror, will mistakenly use
a userspace/cmirror log in _add_log() beause laopts.exclusive is
not set.
Save the previous duplicate PVs in a global list instead
of a list on the cmd struct. dmeventd reuses the cmd struct
for multiple commands, and the list entries between commands
were being freed (apparently), causing a segfault in dmeventd
when it tried to use items in cmd->unused_duplicate_devs
that had been saved there by the previous command.
Recent kernel version from kernel commit:
de7180ff908b2bc0342e832dbdaa9a5f1ecaa33a
started to report in cache status line new flag:
no_discard_passdown
Whenever lvm spots unknown status it reports:
Unknown feature in status:
So add reconginzing this feature flag and also report this with
'lvs -o+kernel_discards'
When no_discard_passdown is found in status 'nopassdown' gets reported
for this field (roughly matching what we report for thin-pools).
Since migration_threshold is now protected to not be smaller
then 8*chunk_size - update tests to count with this modification.
(cherry picked from commit 2cac4bfc150ea1e5459580e3bac4907446ea7f3a)
- remove references to adopting locks which is not used
- move some sanlock-specific info out of a general section
- remove info about doing automatic lockstart by the system
since this was never used (the resource agent does it)
This reverts 518a8e8cfbb672c2bf5e3455f1fe7cd8d94eb5b0
"lvmlockd: activate mirror LVs in shared mode with cmirrord"
because while activating a mirror LV with cmirrord worked,
changes to the active cmirror did not work.
lvm2 till version 2.02.169 (commit 78d004efa8a1809cea68283e6204edfa9d7c1091)
was printing invalid creation_time argument into metadata on 32bit arch.
However with commit ba9820b14223b731125c83dbc9709aa44fdcdbf1 we started
to properly validate all input numbers and thus we refused to accept
invalid metadata with 'garbage' string - but this results in the
situation where metadata produced on older lvm2 on 32 bit architecture
will become unreadable after upgrade.
To fix this case - extend libdm parser in a way, that whenever we
find error integer value, we also check if the parsed value is not for
creation_time node and in this case we let the metadata pass through
with made-up date 2018-05-24 (release date of 2.02.169).
Fix bug in table reload for clustered VG.
Function used in lv/vgchange --monitor y|n is using 'somewhat' hackish
shortcut and accesses activation function monitor_dev_for_events()
directly rather through full device refresh to avoid table reload
in case user want to only change monitoring state of device.
However since with old 'mirrors' there is table change dropping
handle_error there was in some cases needed table update.
This was put into monitor_dev_for_events() with assumption
vg_write_lock_held() could be used to decide if the actual monitoring
change comes from read-only lock-holding commands lvchange/vgchange.
However the clustered locking part (clvmd) actually doesn't differentiate
about this concept of having VG openned in read-only or write mode.
So it caused unwanted reloads of mirror tables even in commands like lvconvert.
Thus for clustered locking there is full table reload put into the code and
shortcut applies only for non-clustered locking.
Also the patch tries to avoid calling repeated LV refresh in case the
lv/vgchange uses --refresh & --monitor.
When using 'lvcreate -l100%VG' and there is big disproportion between
real available space and requested setting - automatically fallback
to 100%FREE.
Difference can be seen when VG is big and already most space was
allocated, so the requestion 100%VG can end (and by spec for % modifier
it's correct) as LV with size of 1%VG. Usually this is not a big
problem - buit in some cases - like cache-pool allocation, this
can result a big difference for chunksize selection.
With this patch it's more closely match common-sense logic without
the need of reitteration of too big changes in lvm2 core ATM.
TODO: in the future there should be allocator solving all allocations
in a single call.
Whenever thin-pool chunk size is unspecified and left for lvm calculation
try to select the size as nearest highest power-of-2 instead of
just being a multiple of 64KiB. When multiple is bigger then 1MiB,
keep using 1MiB multiple.
Udev is running udev-rule action upon 'resume'.
However lvm2 in special case is doing replacement of
'soon-to-be-removed' device with 'error' target for resuming
and then follows actual removal - the sequence is usually quick,
so when udev start action - it can result in 'strange' error
message in kernel log like:
Process '/usr/sbin/dmsetup info -j 253 -m 17 -c --nameprefixes --noheadings --rows -o name,uuid,suspended' failed with exit code 1.
To avoid this - we need to ensure there is synchronization wait for udev
between 'resume' and 'remove' part of this process.
However existing code put strict requirement to avoid synchronizing with
udev inside critical section - but this originally came from requirement
to not do anything special while there could be devices in
suspend-state. Now we are able to see differnce between critical section
with or without suspended devices. For udev synchronization only
suspended devices are prohibited to be there - so slightly relax
condition and allow calling and using 'fs_sync()' even inside critical
section - but there must not be any suspended device.
When data are growing, adapt also size of metadata.
As we get way too many reports from users doing huge growths of
data portion while keep metadata small and avoiding using monitoring.
So to enhance the user-experience in case user requests grown of
thin-pool (without passing PV list for growth) - lvm2 will automaticaly
grown also the metadata part of thin-pool (if possible).
Add function for estimation of thin-pool metadata size for given size of
data. Function is using already existing internal API so it can
be reused for resize of thin-pool data.
Since we are checking _shutdown_requested - we expect all threads
are finished - that is currently checked only by checking ->next ptr
being NULL - so this can be NULL only when _reap() function clears
out all already finished threads.
I'm finding this design quite problematic in its core - but as a
'trivial hotfix' - lets _reap() linked list before check for signal.
There is likely a large potentical for few races - but the windows is
very very small - since lvmetad has been already purged from upstream,
lets go with this hotfix.
The master branch uses activate_lv only, but on the stable branch
activate_lv_excl_local was used. This patch restores the constraints.
Fix regression from bad cherry pick: 9b04851fc574ce9cffd30a51d2b750955239f316
Trying to convert an exiting RAID1 LV to cache metadata SubLV
fails because of missing exclusive activation during wiping.
Solve by activating the RAID1 metadata SubLV exclusively.
Resolves: rhbz1698866
Previous commit 0a726a7e268b31856615491809af73bda5d4d6f9 removed this
by mistake - we have to keep the DefaultDependencies=no - the
sockets.target is after sysinit.target.
To avoid tiny race on checking arrival of signal and entering select
(that can latter remain stuck as signal was already delivered) switch
to use pselect().
If it would needed, we can eventually add extra code for older systems
without pselect(), but there are probably no such ancient systems in
use.
We already used Conflicts=shutdown target to stop LVM2 services on shutdown.
But we still missed the ordering - the shutdown.target should be reached
only after all the services are really stopped.
Reported here: https://github.com/lvmteam/lvm2/issues/17
