IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The option can be used in multiple ways (like --cachesettings):
--integritysettings key=val
--integritysettings 'key1=val1 key2=val2'
--integritysettings key1=val1 --integritysettings key2=val2
Use with lvcreate or lvconvert when integrity is first enabled
to configure:
journal_sectors
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
Use with lvchange to configure (only while inactive):
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
lvchange --integritysettings "" clears any previously configured
settings, so dm-integrity will use its own defaults.
lvs -a -o integritysettings displays configured settings.
log/command_log_report config setting defaults to 1 now if json or json_std
output format is used (either by setting report/output_format config
setting or using --reportformat cmd line arg).
This means that if we use json/json_std output format, the command log
messages are then part of the json output too, not interleaved as
unstructured text mixed with the json output.
If log/command_log_report is set explicitly in the config, then we still
respect that, no matter what output format is used currently. In this
case, users can still separate and redirect the output by using
LVM_OUT_FD, LVM_ERR_FD and LVM_REPORT_FD so that the different types
do not interleave with the json/json_std output.
In case of different PV sizes in a VG, the lvm2 allocator falls short
to define extended segments resiliently asked for 100%FREE RaidLV extension
and a RAID distinct allocation check fails. Fix is to release a memory pool
on the resulting error path.
Until the lvm2 allocator gets enhanced (WIP) to do such complex (and other)
allocations proper, a workaround is to extend a RaidLV to any free space on
its already allocated PVs by defining those PVs on the lvextend command line
then iteratively run further such lvextend commands to extend it to its
final intended size. Mind, this may be a non-trivial extension interation.
The cmd struct is now required in many more functions, and
it's added as a function arg for most direct dev-cache function
calls. The cmd struct is added to struct device (dev->cmd) so
that it can be accessed in many other cases where dev-cache
functions are being called from places where getting the cmd
struct is too difficult.
The dm devs cache is separate from the ordinary dev cache,
so give the function names distinct prefixes, using
"dm_devs_cache" to prefix dm devs cache functions.
When a PV is stacked on an LV, the PV needs to be
dropped from bcache before the LV is processed.
The LV can be found in dev-cache using its name
rather than the devno.
The list of dm devs was in the cmd struct and had a
different lifetime than the radix trees referencing
those dm devs. Now the list and radix trees are
created and destroyed together.
In the context of dm, 'device' refers to a dm device, but
in the context of lvm, 'device' refers to struct device.
Change some lvm function names to make that difference clearer.
dev_manager_get_device_list() -> dev_manager_get_dm_active_devices()
get_device_list() -> get_dm_active_devices()
device_get_uuid() -> dev_dm_uuid(), devno_dm_uuid()
vgchange -an vg is permitted when the vg lockspace
is not available, because LVs could still be active
for some reason, and they should be inactive when not
properly locked. In case lvmlockd was not running, or
the lockspace was not started, the command was
unnecessarily trying and failing to unlock every LV,
printing errors for every LV. We can skip this when
the lockspace is known to not be available.
Lock adoption is not part of standard command behavior, but can
be used for manual recovery or cleanup from unexpected failure
cases. Like other lockopt values, they are hidden options for
--lockopt. Different lock managers will behave differently.
Adopting locks with lvmlockd -A1 is more accurate and automatic.
--lockopt adoptls
. for vgchange --lockstart
. adopt existing ls, or fail if no existing lockspace is found
--lockopt adoptgl | adoptvg | adoptlv
. for commands using lvmlockd locks
. adopt orphan gl/vg/lv lock, or fail the lock request if
no orphan lock is found
. will fail if orphan lock exists with a different lock mode
. command may still continue with a failed shared lock request
--lockopt adopt
. for lockstart or any command using lvmlockd locks
. adopt existing lockspace, or start lockspace if none exists
. adopt orphan gl/vg/lv lock, or acquire new lock if no orphan found
. will fail if orphan lock exists with a different lock mode
. command may still continue with a failed shared lock request
. with dlm this option only works for ls
Stop printing "Skipping global lock: lockspace not found or started"
for vgchange --lockstart, since it's generally an inherent limitation
that the global lock isn't available until after locking is started.
Update the start delay warning to "a few seconds".
The lvb is used to hold lock versions, but lock verions are
no longer used (since the removal of lvmetad), so the lvb
is not actually useful. Disable their use for sanlock to
avoid the extra i/o required to maintain the lvb.
vgremove with --lockopt force should skip lvmlockd-related
steps and allow a forced vg cleanup, in addition to using
--nolocking to skip normal locking calls.
Previously, a command would call lockd_vg() for a local VG,
which would go to lvmlockd, which would send back ENOLS,
and the command would not care when it saw the VG was local.
The pointless back-and-forth to lvmlockd for local VGs can
be avoided by checking the VG lock_type in lvmcache (which
label_scan now saves there; this wasn't the case back when
the original lockd_vg logic was added.) If the lock_type
saved during label_scan indicates a local VG, then the
lockd_vg step is skipped.
The idea in the patch 6e6d4c62b for handling -suffix as
indication of private device needs to be disabled.
Some problematic cases are currently not resolvable and some
more thinking is needed.
Once fixed, we can revert this patch.
For large device sets our dm_hash can produce larger amounf of mapping
collision and we would need to further increase our has size.
So instead use the radix_tree code which is immune agains growing size
of devices and uses memory more effiecently to store all the paths.
Instead of less efficient 'btree' switch dev_cache to use
radix_tree, that is generating more efficient tree mapping.
Some direct use of btree iteration replace with our dev_iter code.
Convert the persisten filter to use more memory compact radix_tree as
dm_hash is bound to preallocated number of slots and stores whole
key together with value.
When DM uuid cache is available, we can possibly avoid unnecessary
status ioctl() when we check the device for 'usable' uuid.
If this test passes the existing code will got through the full check.
Move the code around caching active dm device devno, name and uuid
from device_mapper/libdm-iface to dev_cache file - as libdm layer
cares about 'decoding' ioctl data from kernel and caching for use by
lvm stays within lvm.
Introduce:
dev_cache_update_dm_devs
dev_cache_get_dm_dev_by_devno
dev_cache_get_dm_dev_by_uuid
Use radix_tree for searching.
Do not attach layer suffix to the UUID when activating component LV.
In this case we want to see allow this LV to be public, thus
such LV should not be using -layer suffix in its UUID.
This also requires that our 'cached' access will check for
both UUID (with & without suffix) which was unnoticed issue before.
This change is now necesssary since our udev rule automatically expects
any LV with -layer suffix is private and will prevent generaring
any systemd unit even when there are no 'DM' flags bits passed via
cookie mechanism while creating such LV.
In order to free SubLVs after a stripe removing reshape, lvconvert has
to be run without layout changes. Prevent a layout changing request
in case any such freed SubLVs exist and inform the user about the fact
requesting to release them first.
Instead of using 'key state & key end' uint8_t* switch to use
void* key, & size_t keylen. This allows easier adaptation with
lvm code base with way too much casting with every use of function.
Also correctly mark const buffers to avoid compiled warnings and
casting.
Adapt the only bcache user ATM for API change.
Adapt unit test to match changed API.
Size of these hashes was quite small, so raise the size of
hashed entries to reduce amount of hash collistion.
Select some unique/unused number for hash_create below 8192.
Replace call to get_dm_uuid_from_sysfs() with use of
device_get_uuid() which gets the same information,
but instead of several syscalls it need either 1 or even 0
when the information is cached with newer kernels.
We've got cached DM list before grabbing lock, so there
is some chance, that DM table has changed and we would
need to refresh this info.
TODO: benchmark, whether it would even make sense to refresh cache
and keep it content instead of using individual ioctl() for tree build.
Function that is working with DM target is located within
lib/activate directory.
This function is able to use cached dm_device_list when possible
to quickly resolve checks for device's UUID.
Function can fully replace get_dm_uuid_from_sysfs() and instead
of syscalls for open/read/close get the UUID with single ioctl.
When there is cached dm devs list, we can get many UUID from
a single syscall.
For better use of cached data located within cmd_context,
pass this structure from the top level function.
Also add missing '_' for static _dev_cache_index_devs.
No other change here.
Skip scan and stat() for dirs and nodes within known /dev/ paths,
where no block devices are located.
Also strlen(_cache.dev_dir) just once.
TODO: add more dirs to _no_scan (configurable via lvm.conf ?)
When PVs are created on LVs, remove the devices file entries
for the PVs when the LVs are removed. In general, the devices
file entries should be removed with lvmdevices --deldev when
the LVs are removed (lvremove is the equivalent of detaching
a device from the system when layering PVs on LVs.)
This change is effectively an automatic lvmdevices --deldev
command that is built into lvremove when the LV has a PV on it.
An OS installer can create system.devices for the system and
disks, but an OS image cannot create the system-specific
system.devices. The OS image can instead configure the
image so that lvm will create system.devices on first boot.
Image preparation steps to enable auto creation of system.devices:
- create empty file /etc/lvm/devices/auto-import-rootvg
- remove any existing /etc/lvm/devices/system.devices
- enable lvm-devices-import.path
- enable lvm-devices-import.service
On first boot of the prepared image:
- udev triggers vgchange -aay --autoactivation event <rootvg>
- vgchange activates LVs in the root VG
- vgchange finds the file /etc/lvm/devices/auto-import-rootvg,
and no /etc/lvm/devices/system.devices, so it creates
/run/lvm/lvm-devices-import
- lvm-devices-import.path is run when /run/lvm/lvm-devices-import
appears, and triggers lvm-devices-import.service
- lvm-devices-import.service runs vgimportdevices --rootvg --auto
- vgimportdevices finds /etc/lvm/devices/auto-import-rootvg,
and no system.devices, so it creates system.devices containing
PVs in the root VG, and removes /etc/lvm/devices/auto-import-rootvg
and /run/lvm/lvm-devices-import
Run directly, vgimportdevices --rootvg (without --auto), will create
a new system.devices for the root VG, or will add devices for the
root VG to an existing system.devices.
Function to _allocate_memory() was not compiled-in when lvm2 was
build with support for better tracking memory pool with valgrind.
Instead now correctly avoid this function only when running
withing valgrind environment.
Do not modify flags field from 'strcut command_name' and
instead control this via cmd_context get_vgname_from_options.
Flag GET_VGNAME_FROM_OPTIONS is currently used only by lvconvert.
In the past it was common for a single command to run
multiple lvmcache_label_scan, and this code was a way
to make each call select the same duplicate pvs. Now
commands run a single lvmcache_label_scan, so this is
not needed.
When reseting stream buffer - check for being run within valgrind
and only in this case skip this code.
Define VALGRIND_POOL was incorrectly used for this logic.
Let's move proc into include/configure.h so this define can
be easily used across the source base.
Configure defines it - but ATM we do not provide any configure
option to change it - there should be no need to ever change it.
Let's stop Coverity thinking here we are using freed FILE*
for anything else then comparing numbers.
For this use the original source of old_stream pointer.
Add new configurable option for building lvm2 with enable/disable
default autoactivation setting.
Might be useful for building i.e. rpms for systems where
this event_activation is not desired.
Thin-pool and cache-pool targets got already quite stable so let's try
to remove checking of pools when using lvremove or vgremove commands.
This skips checking pools when they are going to be removed, but it
also when removing thin volume that was the only user of a thin-pool.
In this case thin-pool will be still there and could be activated
again with another thin volume and thin_check will be executed
in this moment. In this case it can delay discovery of metadata damage.
Shortens processing of 'lvcreate -L -V -T' command and
avoid deactivation and its activation with thin_check of the empty
created thin-pool that will be used for the new thin volume
made with a single lvcreate command.
Shuffle code to parsing VDO message also for lvs segment status
so it can report correctly data usage for VDO LVs.
For this change move code and also change its API to use just mempool.
Fixes usage with upstream 6.9 vdo target driver.
When using message API for parsing VDO stats info, 0 was wrongly
used for fallback for trying the old sysfs API.
Switch to use ULLONG_MAX for values that could not have been obtained
through the message call.
Fixes lvdisplay info for freshly created VDO volume with 0 used data
blocks.
Make a seperate function to decode which ID should be user
for cvol meta or data volume - also avoids duplication of code.
As a result it's now also easier to see how the lvid is build.
