1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-25 01:34:38 +03:00
Commit Graph

2208 Commits

Author SHA1 Message Date
Zdenek Kabelac
d425e788e9 lvconvert: validate min chunk size for snapshot
Do not allow conversion of too small LV into a COW snapshot device.

Without this patch snapshot target is generating these kernel
messages before creation fails:

attempt to access beyond end of device
dm-9: rw=16, want=8, limit=2
attempt to access beyond end of device
...
device-mapper: table: 253:11: snapshot: Failed to read snapshot metadata
device-mapper: ioctl: error adding target to table
device-mapper: reload ioctl on  failed: Input/output error
2014-03-17 14:31:43 +01:00
Zdenek Kabelac
f3b9ee37e9 lvconvert: disallow usage of origin for snapshot
Usage of origin as a snapshot 'COW' volume is unsupported.

Without this test lvm2 is able to generate this ugly internal error message.

To test this:

lvcreate -L1 -n lv1 vg
lvcreate -L1 -n lv2 -s vg/lv1
lvcreate -L1 -n lv3 vg
lvconvert -s vg/lv3 vg/lv1

Internal error: LVs (5) != visible LVs (1) + snapshots (1) + internal LVs (0) in VG vg
2014-03-17 14:31:42 +01:00
Peter Rajnoha
ada47c164a autoactivation: use VG read lock
The activation (including the refresh) should take the VG read lock
like the usual activation/refresh.
2014-03-14 12:10:52 +01:00
Peter Rajnoha
ca880a4f13 autoactivation: issue a VG refresh before autoactivation only if 'change' lvmetad flag is set
This prevents numerous VG refreshes on each "pvscan --cache -aay" call
if the VG is found complete. We need to issue the refresh only if the PV:
  - is new
  - was gone before and now it reappears (device "unplug/plug back" scenario)
  - the metadata has changed
2014-03-14 10:48:56 +01:00
Zdenek Kabelac
d5a00c4597 makefiles: link blkid library only to lvm
Don't add blkid to every linkage.
Link udev library just with lvm tools.
Drop extra linkage of udev library, since deps from libdevmapper
are already resolved in linked -ldevmapper.
2014-03-06 17:30:10 +01:00
Zdenek Kabelac
216c57eed7 readline: switch to new-style readline typedef
Based on patch:
https://www.redhat.com/archives/lvm-devel/2014-March/msg00015.html

The CPPFunction typedef (among others) have been deprecated in favour of
specific prototyped typedefs since readline 4.2 (circa 2001).
It's been working since because compatibility typedefs have been in
place until they where removed in the recent readline 6.3 release.
Switch to the new style to avoid build breakage.

But also add full backward compatibility with define.

Signed-off-by: Gustavo Zacarias <gustavo zacarias com ar>
2014-03-06 17:28:40 +01:00
Peter Rajnoha
eecf191d3e config: runtime default for activation/mirror_image_fault_policy
The activation/mirror_image_fault_policy default value copies the
value (or default one) used for activation/mirror_device_fault_policy.
2014-03-06 11:16:23 +01:00
Peter Rajnoha
b53ec37286 config: add CFG_DEFAULT_RUN_TIME for config options with runtime defaults
Previously, we declared a default value as undefined ("NULL") for
settings which require runtime context to be set first (e.g. settings
for paths that rely on SYSTEM_DIR environment variable or they depend
on any other setting in some way).

If we want to output default values as they are really used in runtime,
we should make it possible to define a default value as function which
is evaluated, not just providing a firm constant value as it was before.

This patch defines simple prototypes for such functions. Also, there's
new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide
exactly the same functionality as the original "cfg" and "cfg_array"
macros when defining the configuration settings in config_settings.h,
but they don't set the constant default value. Instead, they automatically
link the configuration setting definition with one of these functions:

  typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile);
  typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile);
  typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile);
  typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile);
  typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile);

(The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and
set the default value link to the function accordingly).

Then such configuration setting requires a function of selected type to
be defined. This function has a predefined name:

  get_default_<id>

...where the <id> is the id of the setting as defined in
config_settings.h. For example "backup_archive_dir_CFG" if defined
as a setting with default value evaluated in runtime with "cfg_runtime"
will automatically have "get_default_backup_archive_dir_CFG" function
linked to this setting to get the default value.
2014-03-06 10:54:17 +01:00
Zdenek Kabelac
2b044452e3 snapshot: zero cow header for read-only snapshot
When read-only snapshot was created, tool was skipping header
initialization of cow device.  If it happened device has been
already containing header from some previous snapshot, it's
been 'reused' for a newly created snapshot instead of being cleared.
2014-02-26 00:22:46 +01:00
Peter Rajnoha
558c932444 dumpconfig: comment out config lines without default values defined
To make "lvm dumpconfig --type default" output to be usable like any
other config, we need to comment out lines that have no default value
defined. Otherwise, we'd have the output with config options
with blank or zero values which is not the same as when the value
is not defined! And such configuration can't be feed into lvm again
without further edits. So let's fix this.

Currently this covers these configuration options exactly:

  devices/loopfiles
  devices/preferred_names
  devices/filter
  devices/global_filter
  devices/types
  allocation/cling_tag_list
  global/format_libraries
  global/segment_libraries
  activation/volume_list
  activation/auto_activation_volume_list
  activation/read_only_volume_list
  activation/mlock_filter
  metadata/dirs
  metadata/disk_areas
  metadata/disk_areas/<disk_area>
  metadata/disk_areas/<disk_area>/start_sector
  metadata/disk_areas/<disk_area>/size
  metadata/disk_areas/<disk_area>/id
  tags/<tag>
  tags/<tag>/host_list
2014-02-25 11:32:54 +01:00
Zdenek Kabelac
1b566a2152 cleanup: keep pv_count unsigned 2014-02-25 09:43:04 +01:00
Zdenek Kabelac
e7d189baf7 allocation: add default path
Make it obvious for compiler extents is always defined for
valid code path.
2014-02-25 09:36:26 +01:00
Jonathan Brassow
b84797be32 cache: Disallow vgsplit when there are cache LVs in the VG
The code seems to work fine for the most trivial case - moving a
simple cache LV.  However, it can cause problems when trying to
split out other LVs on different VGs and there hasn't been sufficient
testing for LV stacks that contain cache to enable the code.  So,
we actively disable what is already broken and wait for the next
release to fix it.
2014-02-24 16:54:09 -06:00
Alasdair G Kergon
b359b86f88 allocation: improve approx alloc with resize
Start to convert percentage size handling in lvresize to the new
standard.  Note in the man pages that this code is incomplete.
Fix a regression in non-percentage allocation in my last check in.

This is what I am aiming for:

-l<extents>
-l<percent> LV/ORIGIN
	sets or changes the LV size based on the specified quantity
	of logical logical extents (that might be backed by
	a higher number of physical extents)

-l<percent> PVS/VG/FREE
	sets or changes the LV size so as to allocate or free the
	desired quantity of physical extents (that might amount to a
	lower number of logical extents for the LV concerned)

-l+50%FREE - Use up half the remaining free space in the VG when
	carrying out this operation.

-l50%VG - After this operation, this LV should be using up half the
	space in the VG.

-l200%LV - Double the logical size of this LV.

-l+100%LV - Double the logical size of this LV.

-l-50%LV - Reduce the logical size of this LV by half.
2014-02-24 22:48:23 +00:00
Zdenek Kabelac
a920bc1a40 cleanup: indent, drop unneeded braces 2014-02-24 21:13:35 +01:00
Zdenek Kabelac
0118d6aa48 cleanup: spelling 2014-02-24 21:13:35 +01:00
Zdenek Kabelac
95fe823eba raid: use feature attributes for raid10
Test raid10 availability as a target feature (instead of doing
it in all the places where raid10 should be checked).

TODO: activation needs runtime validation - so metadata with raid10
are skipped from activation in user-friendly way in lvm2.
2014-02-24 21:10:13 +01:00
Jonathan Brassow
ee89ac7b88 pvmove: Disallow pvmove of cache LVs
Skip over LVs that have a cache LV in their tree of LV dependencies
when performing a pvmove.

This means that users cannot move a cache pool or a cache LV's origin -
even when that cache LV is used as part of another LV (e.g. a thin pool).

The new test (pvmove-cache-segtypes.sh) currently builds up various LV
stacks that incorporate cache LVs.  pvmove tests are then performed to
ensure that cache related LVs are /not/ moved.  Once pvmove is enabled
for cache, those tests will switch to ensuring that the LVs /are/
moved.
2014-02-24 12:25:18 -06:00
Alasdair G Kergon
13c3f53f55 allocation: misc fixes for percent/raid rounding
Several fixes for the recent changes that treat allocation percentages
as upper limits.
Improve messages to make it easier to see what is happening.
Fix some cases that failed with errors when they didn't need to.
Fix crashes when first_seg() returns NULL.
Remove a couple of log_errors that were actually debugging messages.
2014-02-22 00:26:01 +00:00
Jonathan Brassow
00ce01e52d cache-pool: Change segtype name from cache_pool to cache-pool
Thin pools use "thin-pool" for the segment type name.  To be consistent,
we use "cache-pool" instead of "cache_pool".
2014-02-19 09:26:03 -06:00
Zdenek Kabelac
c71a3bcbc0 activation: lv_activation_skip remove always same arg.
Remove 'skip' argument passed into the function.
We always used '0' - as this is the only supported
option (-K) and there is no complementary option.

Also add some testing for behaviour of skipping.
2014-02-19 11:33:39 +01:00
Zdenek Kabelac
750a310a40 cleanup: indent 2014-02-18 21:22:00 +01:00
Zdenek Kabelac
e6fd16f8ea cleanup: use is_change_activating
Use a single inline function to detect activation/deactivation
2014-02-18 21:21:59 +01:00
Zdenek Kabelac
fb519c35bb cleanup: move verbose message to lv_activation_skip
Simplify code and put verbose message into a single place.
2014-02-18 20:49:32 +01:00
Jonathan Brassow
6a00a7e33d RAID: Allow implicit stripe (and parity) when creating RAID LVs
There are typically 2 functions for the more advanced segment types that
deal with parameters in lvcreate.c: _get_*_params() and _check_*_params().
(Not all segment types name their functions according to this scheme.)
The former function is responsible for reading parameters before the VG
has been read.  The latter is for sanity checking and possibly setting
parameters after the VG has been read.

This patch adds a _check_raid_parameters() function that will determine
if the user has specified 'stripe' or 'mirror' parameters.  If not, the
proper number is computed from the list of PVs the user has supplied or
the number that are available in the VG.  Now that _check_raid_parameters()
is available, we move the check for proper number of stripes from
_get_* to _check_*.

This gives the user the ability to create RAID LVs as follows:
# 5-device RAID5, 4-data, 1-parity (i.e. implicit '-i 4')
~> lvcreate --type raid5 -L 100G -n lv vg /dev/sd[abcde]1

# 5-device RAID6, 3-data, 2-parity (i.e. implicit '-i 3')
~> lvcreate --type raid6 -L 100G -n lv vg /dev/sd[abcde]1

# If 5 PVs in VG, 4-data, 1-parity RAID5
~> lvcreate --type raid5 -L 100G -n lv vg

Considerations:
This patch only affects RAID.  It might also be useful to apply this to
the 'stripe' segment type.  LVM RAID may include RAID0 at some point in
the future and the implicit stripes would apply there.  It would be odd
to have RAID0 be able to auto-determine the stripe count while 'stripe'
could not.

The only draw-back of this patch that I can see is that there might be
less error checking.  Rather than informing the user that they forgot
to supply an argument (e.g. '-i'), the value would be computed and it
may differ from what the user actually wanted.  I don't see this as a
problem, because the user can check the device count after creation
and remove the LV if they have made an error.
2014-02-17 20:18:23 -06:00
Zdenek Kabelac
25cea92338 thin: fix merge of old snaphost
Fix merging of old snapshot into thinvolume origin.
Add also internal error for the error case when
merging requests activation of merged LV.
2014-02-17 22:25:53 +01:00
Jonathan Brassow
4b6e3b5e5e allocation: Allow approximate allocation when specifying size in percent
Introduce a new parameter called "approx_alloc" that is set when the
desired size of a new LV is specified in percentage terms.  If set,
the allocation code tries to get as much space as it can but does not
fail if can at least get some.

One of the practical implications is that users can now specify 100%FREE
when creating RAID LVs, like this:
~> lvcreate --type raid5 -i 2 -l 100%FREE -n lv vg
2014-02-13 21:10:28 -06:00
Marian Csontos
a060b3b390 Fix premature return from get_pool_params 2014-02-13 10:50:56 +01:00
Jonathan Brassow
0912cf67aa cache: Ability to convert an existing LV into a cached LV
Users now have the ability to convert their existing logical volumes
into cached logical volumes.  A cache pool LV must be specified using
the '--cachepool' argument.  The cachepool is the small, fast LV used
to cache the large, slow LV that is being converted.
2014-02-12 09:55:35 -06:00
Jonathan Brassow
c8b6c4aee9 cachepool: Ability to convert existing LVs to cachepool type
This patch allows users to convert existing logical volumes into
cache pool LVs.  Since cache pool LVs consist of data and metadata
sub-LVs, there is also the '--poolmetadata' (similar to thin_pool)
which allows for the specification of the metadata device.
2014-02-12 09:51:42 -06:00
Zdenek Kabelac
f86e18bfeb cleanup: condition reodering
Check SEG_CANNOT_BE_ZEROED before even calling arg_str_value which
is not needed in this case.

Set it to 1 or 0 and not just result of strcmp call.
2014-02-11 19:00:06 +01:00
Jonathan Brassow
96626f64fa cache: Code to allow the create/remove of cache LVs
This patch allows users to create cache LVs with 'lvcreate'.  An origin
or a cache pool LV must be created first.  Then, while supplying the
origin or cache pool to the lvcreate command, the cache can be created.

Ex1:
Here the cache pool is created first, followed by the origin which will
be cached.
~> lvcreate --type cache_pool -L 500M -n cachepool vg /dev/small_n_fast
~> lvcreate --type cache -L 1G -n lv vg/cachepool /dev/large_n_slow

Ex2:
Here the origin is created first, followed by the cache pool - allowing
a cache LV to be created covering the origin.
~> lvcreate -L 1G -n lv vg /dev/large_n_slow
~> lvcreate --type cache -L 500M -n cachepool vg/lv /dev/small_n_fast

The code determines which type of LV was supplied (cache pool or origin)
by checking its type.  It ensures the right argument was given by ensuring
that the origin is larger than the cache pool.

If the user wants to remove just the cache for an LV.  They specify
the LV's associated cache pool when removing:
~> lvremove vg/cachepool

If the user wishes to remove the origin, but leave the cachepool to be
used for another LV, they specify the cache LV.
~> lvremove vg/lv

In order to remove it all, specify both LVs.

This patch also includes tests to create and remove cache pools and
cache LVs.
2014-02-04 16:50:16 -06:00
Jonathan Brassow
97be8b3482 cache: Code changes to allow creation of cache pools
This patch allows the creation and removal of cache pools.  Users are not
yet able to create cache LVs.  They are only able to define the space used
for the cache and its characteristics (chunk_size and cache mode ATM) by
creating the cache pool.
2014-02-04 11:57:08 -06:00
Jonathan Brassow
013cf27bff cache pool: Add 'update_cache_pool_params'
Similar function to 'update_thin_pool_params', but for cache.  Performs
the adjustements for chunk_size, metdata device size, etc.
2014-02-04 11:50:27 -06:00
Jonathan Brassow
8ddc7f641c misc: disambiguate 'update_pool_params'
s/update_pool_params/update_thin_pool_params/ to disambiguate it from
a future 'update_cache_pool_params'.
2014-02-04 09:58:35 -06:00
Alasdair G Kergon
4aa8a14fc2 compilation: Rename tags variables to tagsl. 2014-01-30 21:09:28 +00:00
Alasdair G Kergon
83358d4c03 tools: Add internal tags command. 2014-01-30 13:09:15 +00:00
Zdenek Kabelac
155405b0e1 thin: validate external origin size
Avoid use of external origin with size unaligned/incompatible with
thin pool chunk size, since the last chunk is not correctly provisioned
when it is overwritten.
2014-01-29 14:58:13 +01:00
Zdenek Kabelac
e9d9852c55 thin: more validation of thin name
Avoid starting conversion of the LV to the thin pool and thin volume
at the same time.  Since this is mostly a user mistake, do not try
to just convert to one of those type, since we cannot assume if the
user wanted LV to become thin volume or thin pool.

Before the fix tool reported pretty strange internal error:
Internal error: Referenced LV lvol1_tdata not listed in VG mvg.

Fixed output:
lvconvert --thinpool lvol0 -T mvg/lvol0
Can't use same LV mvg/lvol0 for thin pool and thin volume.
2014-01-28 13:21:39 +01:00
Jonathan Brassow
998af1a4fb Misc: Change name of lvcreate_params field - s/create_thin_pool/create_pool/
In preparation for other segment types that create and use "pools", we
s/create_thin_pool/create_pool/.  This way it is not awkward when creating
a cachepool, for example, to use "create_thin_pool".
2014-01-22 10:30:55 -06:00
Alasdair G Kergon
5a450eab6a pvs: fix segfaults with orphans
Several fields used to display 0 if undefined.  Recent changes
to the way the fields are reported threw away some tests for
valid pointers, leading to segfaults with 'pvs -o all'.

Reinstate the original behaviour.
2014-01-14 03:17:27 +00:00
Petr Rockai
9c445f3c2c reporter: Set labeller on dummy labels (fixes missing fmt field). 2014-01-13 11:45:38 +01:00
Petr Rockai
5f7286f15d toollib: Fix a pool leak in _process_all_devs. 2014-01-13 11:26:43 +01:00
Petr Rockai
087d33d73b toollib: Fix a mis-merge in _process_all_devs (duplicated pvs -a output). 2014-01-07 02:49:12 +01:00
Peter Rajnoha
32080c4ff7 device: add physical block size info and make sure VG extent size >= PV's phys. block size 2013-12-12 15:02:36 +01:00
Zdenek Kabelac
fe21b02fab cleanup: improve tag processing
Boolean algebra changes for process_each_lv_in_vg().

1st.
Drop process_lv variable since it's not needed.

2nd.
process_lv was always initilized to 0 - so the condition was always true.
It the condition (!tags_supplied && !lvargs_supplied) evaluates as "true",
process_all is already set to 1, so skip vg tags evaluation.

3rd.
Move check for matching lv name in the front of lv tags check
since this check can't be skipped for lvargs_matched counter.
If this filter evaluates to true, skip lv tags evaluation.
2013-12-12 13:29:20 +01:00
Alasdair G Kergon
16eab3ec08 config: shorten new sig wiping option string
Rename wipe_signatures_on_new_logical_volumes_when_zeroing  to
wipe_signatures_when_zeroing_new_lvs.
2013-12-09 09:35:47 +00:00
Peter Rajnoha
a344466e26 compile/link: EXTRA_EXEC_CFLAGS must be applied for *.o 2013-12-05 14:19:10 +01:00
Peter Rajnoha
481edce41f compile/link: use RELRO/PIE compiler/linker options for executables 2013-12-05 14:03:10 +01:00
Zdenek Kabelac
74878bc2bc cleanup: gcc can't see the code path
This is a bit to hard for gcc to see the condition can't
be triggered, so make it easier and initialize to 0.
2013-12-05 09:42:50 +01:00
Zdenek Kabelac
598c82fc07 vgchange: move detection of remote exlusivness
Since activation takes only read-lock, there could be
multiple activation running in parallel.

So instead of checking before taking any real lock,
let the locking resolve the problem and just
detect if the reason for failure has been remote
exlusive activation.

It should be also faster, since each activation does
not need to do explicit lock query.
2013-12-04 17:09:51 +01:00
Zdenek Kabelac
91496e0eda thin: enable thin snapshot merge 2013-12-04 14:30:26 +01:00
Zdenek Kabelac
971ab733b7 thin: activation of merging thin snapshot
For merging thin snapshot we have to do couple extra
checks before we allow this operation.

We pretend  thin-snapshot and thin-origin
are tied together and we have to properly
maintain locking.
2013-12-04 14:30:26 +01:00
Zdenek Kabelac
cf7f451238 merge: test only for meging origin
It's enough to check only for merging origin.
This will be also used for thin volume merges which
do not need to be origins.
2013-12-04 14:30:25 +01:00
Zdenek Kabelac
51783676fb cleanup: swap condition logic
Use easier to follow logic of code.
When checking for merging origin, do a merging.
2013-12-04 14:30:25 +01:00
Zdenek Kabelac
6d7a76ccbf cleanup: code move
Move _swap_lv_identifiers() above  _finish_lvconvert_merge()
so it could be used from this function.
2013-12-04 14:30:25 +01:00
Zdenek Kabelac
5a6794a2ce lv_remove_single: add silent arg
Support silence for removal message.
2013-12-04 14:30:25 +01:00
Zdenek Kabelac
778de22d51 refresh: print error message with failing lv name
If there is  suspend/resume error, print error message
with lv name.
Drop goto.
2013-12-04 14:30:24 +01:00
Alasdair G Kergon
7b65363bf7 lvconvert: Implement --splitsnapshot. 2013-12-04 02:09:37 +00:00
Alasdair G Kergon
ff769ecfe7 lvconvert: Fix reload after snapshot conversion.
At the end of lvconvert --snapshot with an active origin, the origin
gets reloaded.

Commit 57c0f72b1d ("lvconvert: use
_reload_lv on more places") accidentally replaced this with a snapshot
LV reload (which does nothing because only the origin is active).
2013-12-04 02:04:29 +00:00
Peter Rajnoha
6232cac86c vgdisplay: select only active volumes groups if -A option is used
Where "active" means "at least one LV is active in the volume group".
2013-12-03 14:43:00 +01:00
Alasdair G Kergon
2e82a070f3 pvcreate: Avoid spurious 'not found' messages.
Replacement of pv_read by find_pv_by_name in commit
651d5093ed caused spurious
error messages when running pvcreate or vgextend against an
unformatted device.

Physical volume /dev/loop4 not found
Physical volume "/dev/loop4" successfully created

Physical volume /dev/loop4 not found
Physical volume /dev/loop4 not found
Physical volume "/dev/loop4" successfully created
Volume group "vg1" successfully extended
2013-11-29 21:45:37 +00:00
Zdenek Kabelac
50e1fad86a cleanup: use matching signed types 2013-11-28 12:47:51 +01:00
Zdenek Kabelac
8c96afd361 cleanup: use compound literals for wipe_lv
Optimize and cleanup recently introduced new function wipe_lv.
Use compound literals to get nicely initialized wipe_params struct.
Pass in lv as explicit argument for wipe_lv.
Use cmd from lv structure.
Initialize only non-null members so it's easy to see what
is the special arg.
2013-11-28 12:45:52 +01:00
Zdenek Kabelac
a1eda8ea24 toollib: drop init of ret
Keep the ret uninitialized, so we get compiler warning, when tried
to use this value instead of ret_max as function return value.
2013-11-28 12:45:52 +01:00
Zdenek Kabelac
8724c0fceb snapshot: move code of old snapshot merge
Move code for merging old snapshot into its own function.
2013-11-28 12:45:28 +01:00
Zdenek Kabelac
79991aa769 snapshot: drop find_merging_snapshot
Drop find_merging_snapshot() function. Use find_snapshot()
called after check for lv_is_merging_origin() which
is the commonly used code path - so we avoid duplicated
tests and potential risk of derefering NULL point
in unhandled error path.
2013-11-28 12:42:43 +01:00
Peter Rajnoha
9bfc0be493 configure: add --enable-blkid_wiping 2013-11-27 15:48:16 +01:00
Peter Rajnoha
b6dab4e059 lv_manip: rename set_lv -> wipe_lv and include signature wiping capability
Use common wipe_lv (former set_lv) fn to do zeroing as well as signature
wiping if needed. Provide new struct wipe_lv_params to define the
functionality.

Bind "lvcreate -W/--wipesignatures y" with proper wipe_lv call.

Also, add "yes" and "force" to lvcreate_params so it's possible
to apply them for the prompt: "WARNING: %s detected on %s. Wipe it? [y/n]".
2013-11-27 15:48:15 +01:00
Peter Rajnoha
169b4c1586 lvcreate: recognize --wipesignatures arg
Recognize the new --wipesignatures arg in lvcreate that is supposed
to wipe known signatures if found on newly created LV.
2013-11-27 15:48:15 +01:00
Peter Rajnoha
120df55610 activation: change log_error to log_warn if refresh before autoactivation fails 2013-11-27 08:53:26 +01:00
Peter Rajnoha
729b104413 activation: continue with autoactivation if refresh fails
If the refresh fails for any reason before autoactivation, let's not
make this a stopper for autoactivation itself - just log the error
message if it appears.

The reason is that in some rare situations, we can still hit the
problem with the suspend call to fail (as already described in
commit d8085edf65, also
https://bugzilla.redhat.com/show_bug.cgi?id=1027314). The refresh
itself is done for only one reason - to refresh any dm tables
for LVs for which the underlying PVs got unplugged/disconnected
and then plugged/connected back (see also
https://bugzilla.redhat.com/show_bug.cgi?id=954061 for more info).
In this case, the major:minor pair is changed and we need to
update dm tables for LVs accordingly.

Now if refresh fails, the error is still logged, but autoactivation
continues.
2013-11-27 08:20:02 +01:00
Peter Rajnoha
8d5cff5b9b lv/vgchange: do not try to connect to lvmetad if socket absent and --sysinit -aay used
If using lv/vgchange --sysinit -aay and lvmetad is enabled, we'd like to
avoid the direct activation and rely on autoactivation instead so
it fits system initialization scripts.

But if we're calling lv/vgchange --sysinit -aay too early when even
lvmetad service is not started yet, we just need to do the direct
activation instead without printing any error messages (while
trying to connect to lvmetad and not finding its socket).

This patch adds two helper functions - "lvmetad_socket_present" and
"lvmetad_used" which can be used to check for this condition properly
and avoid these lvmetad connections when the socket is not present
(and hence lvmetad is not yet running).
2013-11-26 14:51:23 +01:00
Zdenek Kabelac
62db5c1e48 cleanup: make gcc happier with initializers
Whole struct will be set to 0, just
if the first member is array, gcc gives warning
we should initialized this element as array,
so pick any later simple type.
2013-11-22 21:00:56 +01:00
Zdenek Kabelac
4a061a35c7 snapshot: use lv_check_not_in_use
Instead of plain open_count check, try to use 'smarter'
lv_check_not_in_use() function.
2013-11-22 20:58:11 +01:00
Zdenek Kabelac
6d196410fc snapshot: revert and move check to lvconvert
Revert 4777eb6872 which put
target_present check into init_snapshot_merge(). However
this function is also used when parsing metadata. So we would
get this present test performed even when target is not really
needed. So move this target_present test directly into lvconvert.
2013-11-22 20:57:30 +01:00
Alasdair G Kergon
4c1f281b43 toollib: Avoid undefined ignore_vg parameter.
Fix process_each_segment_in_pv to always set ret before calling ignore_vg().
2013-11-22 18:11:04 +00:00
Tony Asleson
04304ba735 lvm2app: Add ability to create PV with args
Add a PV create which takes a paramters object that
has get/set method to configure PV creation.

Current get/set operations include:
- size
- pvmetadatacopies
- pvmetadatasize
- data_alignment
- data_alignment_offset
- zero

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=880395

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-11-19 14:40:34 -06:00
Tony Asleson
5074dcc896 metadata.c: Call refactored vgreduce_single
Replace the code with the refactored vgreduce_single instead
of calling its own implementation.

Corrects bug: https://bugzilla.redhat.com/show_bug.cgi?id=989174

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-11-19 14:40:30 -06:00
Tony Asleson
fe474e1452 vgreduce: Move _vgreduce_single functionality
Moving the core functionality of vgreduce single into
lib/metadata/vg.c so that the command line and lvm2app library
can call the same core functionality.  New function is
vgreduce_single.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-11-19 14:40:28 -06:00
Petr Rockai
ae337d472e report: Print UUIDs for missing PVs when possible. 2013-11-17 22:36:13 +01:00
Petr Rockai
14ffc9d4df reporter: Adapt pvseg reporting to label-type fields. 2013-11-17 21:43:06 +01:00
Petr Rockai
2294282184 reporter: Deal correctly with dummy PVs/labels. 2013-11-17 21:43:06 +01:00
Petr Rockai
d5095222fa toollib: Report errors on non-PV arguments to process_each_label. 2013-11-17 21:43:06 +01:00
Petr Rockai
67a7b7a87d report: Iterate over labels instead of PVs for label-only reports. 2013-11-17 21:43:06 +01:00
Petr Rockai
7e33f50cea report: Add a proper "label" field type. 2013-11-17 21:41:27 +01:00
Petr Rockai
1ef2c3c4ee toollib: Implement process_each_label. 2013-11-17 21:41:27 +01:00
Petr Rockai
7e685e6c70 toollib: Drop the pv_read optimisation.
Only reading a single PV works correctly only in very limited circumstances.
Moreover, we can't rely on the MDA available on the PV either, since it may be
out of date in some circumstances (until now, we believed that PVs that have an
empty MDA are always orphans, but this is not 100% reliable either).
2013-11-17 21:41:26 +01:00
Alasdair G Kergon
527db4645f gcc: replace #ifdef linux with __linux__ 2013-11-13 13:56:29 +00:00
Peter Rajnoha
d8085edf65 pvscan: retry VG refresh before autoactivation if it fails
There's a tiny race when suspending the device which is part
of the refresh because when suspend ioctl is performed, the
dm kernel driver executes (do_suspend and dm_suspend kernel fn):

  step 1: a check whether the dev is already suspended and
          if yes it returns success immediately as there's
          nothing to do
  step 2: it grabs the suspend lock
  step 3: another check whether the dev is already suspended
          and if found suspended, it exits with -EINVAL now

The race can occur in between step 1 and step 2. To prevent
premature autoactivation failure, we're using a simple retry
logic here before we fail completely. For a complete solution,
we need to fix the locking so there's no possibility for suspend
calls to interleave each other to cause this kind of race.

This is just a workaround. Remove it and replace it with proper
locking once we have that in!
2013-11-12 11:09:45 +01:00
Zdenek Kabelac
52f41baedb dmsetup: report error on stderr
Send error message on stdout, since after _display_info_long()
command return errors.

Patch makes consistent behavior for command:

dmsetup info -c non-existing-dev
&
dmsetup info non-existing-dev

Now both commands report error on stderr when they return error status
for non-existing device.
2013-11-01 13:05:03 +01:00
Peter Rajnoha
f1a42aa8ec lvconvert: use LV_TEMPORARY when necessary during lvconvert to thin pool
This is an addition to original patch for lvcreate - commit 039bdad.
The same principle applies to lvconvert where there are several steps
during which we need to wipe the existing LV that's being converted
to thin pool, making sure there's no other interference from outside (udev).
2013-10-29 13:33:35 +01:00
Jonathan Brassow
772fa460d1 clean-up: Remove redundant faulty logic
Remove conditional that boils down to "if yes or no, then do".  The
previous condition in the statement is sufficient and the extra
(always true) condition is unnecessary.
2013-10-23 22:44:04 -05:00
Peter Rajnoha
0a48137d39 pvscan: use major:minor as short form of --major and --minor arg for pvscan --cache
Before, pvscan recognized either:
  pvscan --cache --major <major> --minor <minor>
or
  pvscan --cache <DevicePath>

When the device is gone and we need to notify lvmetad about device
removal, only --major/--minor works as we can't translate DevicePath
into major/minor pair anymore. The device does not exist in the system
and we don't keep DevicePath index in lvmetad cache to make the
translation internally into original major/minor pair. It would be
useless to keep this index just for this one exact case.

There's nothing bad about using "--major <major> --minor <minor>",
but it makes our life a bit harder when trying to make an
interconnection with systemd units, mainly with instantiated services
where only one and only one arg can be passed (which is encoded in the
service name).

This patch tries to make this easier by adding support for recognizing
the "<major>:<minor>" as a shortcut for the longer form
"--major <major> --minor <minor>". The rule here is simple: if the argument
starts with "/", it's a DevicePath, otherwise it's a <major>:<minor> pair.
2013-10-22 13:52:18 +02:00
Peter Rajnoha
3924a041ba coverity: sscanf should use "%u" instead of "%i"
The "age" variable is unsigned:

  unsigned age = 0;
  ...
  if (argc == 2 && (sscanf(argv[1], "%i", &age) != 1))
2013-10-17 10:17:16 +02:00
Zdenek Kabelac
dd3a2f13f1 thin: missed check for thin_pool in last update 2013-10-16 12:47:30 +02:00
Zdenek Kabelac
1b7631101b thin: fix lvconvert for active pool.
Prohibit conversion of pool device with active thin volumes.
Properly restore active states only for active thin pool volume.
Use new LV_NOSCAN when converting volume into thin pool's metadata.
2013-10-16 10:53:01 +02:00
Zdenek Kabelac
ac961087b0 snapshot: disable merging for virtual snaps
Merging into virtual origin is not supposed to work.
2013-10-12 00:15:55 +02:00
Zdenek Kabelac
81504ba70c snapshot: move virtsnap code from tool to lib
Move code for removal dependency from tool's remove.c
into lib's manipulation code.

Same code then works with lvm2app.
2013-10-12 00:14:52 +02:00
Zdenek Kabelac
92bafade60 thin: fix lvconvert in external origin conversion
Patch 562ad293fd introduced code regression
when LV was converted to a thin LV with external origin and at the same time,
conversion of LV to a thin pool has been requested.
(RHBZ: #997704)

data_lv needs to be assigned after test for external conversion find pool.
2013-10-08 13:41:06 +02:00
Zdenek Kabelac
30746f31dd vgrename: run fullscan
For vgrename run full scan so the command is able to properly
detect name collision.
2013-10-08 13:39:11 +02:00
Alasdair G Kergon
4806f38d70 lvchange: improve discards when pool active error
Existing message deemed misleading:
  Cannot change discards state for active pool volume

https://bugzilla.redhat.com/show_bug.cgi?id=994315
2013-10-07 23:50:09 +01:00
Alasdair G Kergon
04d9a52684 release 2.02.103
52 files changed, 598 insertions(+), 264 deletions(-)
2013-10-04 14:32:23 +01:00
Alasdair G Kergon
baf95bbff7 cmdline: Add --ignoreskippedcluster.
Accept --ignoreskippedcluster with pvs, vgs, lvs, pvdisplay, vgdisplay,
lvdisplay, vgchange and lvchange to avoid the 'Skipping clustered
VG' errors when requesting information about a clustered VG
without using clustered locking and still exit with success.

The messages can still be seen with -v.
2013-10-01 21:20:10 +01:00
Jonathan Brassow
098896fb29 mirror/RAID: Honor mirror_segtype_default when converting from linear
1) When converting from an x-way mirror/raid1 to a y-way mirror/raid1,
the default behaviour should be to stay the same segment type.

2) When converting from linear to mirror or raid1, the default behaviour
should honor the mirror_segtype_default.

3) When converting and the '--type' argument is specified, the '--type'
argument should be honored.

catch such conditions, but errors in the tests caused the issue to go
unnoticed.  The code has been fixed to perform #2 properly, the tests
have been corrected to properly test for #2, and a few other tests
were changed to explicitly specify the '--type mirror' when necessary.
2013-09-25 22:25:43 -05:00
Peter Rajnoha
cc9e65c391 thin: use appropriate default value based on allocation/thin_pool_chunk_size_calculation setting
If thin_pool_chunk_size_calculation is set to "default", use 64KiB,
otheriwse 512KiB for "performance".
2013-09-25 16:06:38 +02:00
Peter Rajnoha
f050278a35 tools: don't install separate command symlink for lvm devtypes 2013-09-24 09:35:20 +02:00
Alasdair G Kergon
7233e584ad pvmove: Accept PE ranges as start+length. 2013-09-23 19:50:34 +01:00
Alasdair G Kergon
bbcc120e5a pvmove: clean exit on failed pvmove restart
At present, before the pvmove command can be used to restart pvmove
polling, the LVs concerned need to be activated e.g. with lvchange -ay.
2013-09-23 19:46:28 +01:00
Petr Rockai
3df50d822b vgconvert: Do not call lvmetad_vg_remove (path shared with vgcfgbackup). 2013-09-18 12:53:11 +02:00
Petr Rockai
054cf25b5f vgcfgrestore: Remove VG rom lvmetad later, to better deal with errors. 2013-09-18 11:24:58 +02:00
Petr Rockai
a6af611ae1 vgcfgrestore: Remove the VG from lvmetad before overwriting it. 2013-09-18 10:37:29 +02:00
Alasdair G Kergon
68f841fcda dmsetup: Detect invalid sector supplied to message.
atoll doesn't check for errors, so invalid sector numbers were silently
accepted in the "dmsetup message" command.

(Mikulas)
2013-09-18 01:24:19 +01:00
Alasdair G Kergon
6e912d949b tools: Avoid overflow in _get_int_arg.
Use strtoull instead of strtol so that argument size is not cut
to 31 bytes on machines with 32-bit long.

(Mikulas)
2013-09-18 01:16:48 +01:00
Alasdair G Kergon
a3a5f58c21 reporting: Add devtypes command.
Add internal devtypes reporting command to display built-in recognised
block device types.  (The output does not include any additional
types added by a configuration file.)

> lvm devtypes -o help
  Device Types Fields
  -------------------
    devtype_all            - All fields in this section.
    devtype_name           - Name of Device Type exactly as it appears in /proc/devices.
    devtype_max_partitions - Maximum number of partitions. (How many device minor numbers get reserved for each device.)
    devtype_description    - Description of Device Type.

> lvm devtypes
  DevType       MaxParts Description
  aoe                 16 ATA over Ethernet
  ataraid             16 ATA Raid
  bcache               1 bcache block device cache
  blkext               1 Extended device partitions
...
2013-09-18 01:09:15 +01:00
Alasdair G Kergon
ce9a5cc257 debug: Use // for commented out debug #defines
The traditional style used for optional editable definitions
/* #define X	/* */
produces a bogus warning from gcc -Wall.

Rather than suppressing this with -Wno-comment, switch over to
the // comment style.
2013-09-16 20:20:26 +01:00
Jonathan Brassow
82228acfc9 Mirror/Thin: Disallow thinpools on mirror logical volumes
The same corner cases that exist for snapshots on mirrors exist for
any logical volume layered on top of mirror.  (One example is when
a mirror image fails and a non-repair LVM command is the first to
detect it via label reading.  In this case, the LVM command will hang
and prevent the necessary LVM repair command from running.)  When
a better alternative exists, it makes no sense to allow a new target
to stack on mirrors as a new feature.  Since, RAID is now capable of
running EX in a cluster and thin is not active-active aware, it makes
sense to pair these two rather than mirror+thinpool.

As further background, here are some additional comments that I made
when addressing a bug related to mirror+thinpool:
(https://bugzilla.redhat.com/show_bug.cgi?id=919604#c9)
I am going to disallow thin* on top of mirror logical volumes.
Users will have to use the "raid1" segment type if they want this.

This bug has come down to a choice between:
1) Disallowing thin-LVs from being used as PVs.
2) Disallowing thinpools on top of mirrors.

The problem is that the code in dev_manager.c:device_is_usable() is unable
to tell whether there is a mirror device lower in the stack from the device
being checked.  Pretty much anything layered on top of a mirror will suffer
from this problem.  (Snapshots are a good example of this; and option #1
above has been chosen to deal with them.  This can also be seen in
dev_manager.c:device_is_usable().)  When a mirror failure occurs, the
kernel blocks all I/O to it.  If there is an LVM command that comes along
to do the repair (or a different operation that requires label reading), it
would normally avoid the mirror when it sees that it is blocked.  However,
if there is a snapshot or a thin-LV that is on a mirror, the above code
will not detect the mirror underneath and will issue label reading I/O.
This causes the command to hang.

Choosing #1 would mean that thin-LVs could never be used as PVs - even if
they are stacked on something other than mirrors.

Choosing #2 means that thinpools can never be placed on mirrors.  This is
probably better than we think, since it is preferred that people use the
"raid1" segment type in the first place.  However, RAID* cannot currently
be used in a cluster volume group - even in EX-only mode.  Thus, a complete
solution for option #2 must include the ability to activate RAID logical
volumes (and perform RAID operations) in a cluster volume group.  I've
already begun working on this.
2013-09-11 15:58:44 -05:00
Jonathan Brassow
2691f1d764 RAID: Make RAID single-machine-exclusive capable in a cluster
Creation, deletion, [de]activation, repair, conversion, scrubbing
and changing operations are all now available for RAID LVs in a
cluster - provided that they are activated exclusively.

The code has been changed to ensure that no LV or sub-LV activation
is attempted cluster-wide.  This includes the often overlooked
operations of activating metadata areas for the brief time it takes
to clear them.  Additionally, some 'resume_lv' operations were
replaced with 'activate_lv_excl_local' when sub-LVs were promoted
to top-level LVs for removal, clearing or extraction.  This was
necessary because it forces the appropriate renaming actions the
occur via resume in the single-machine case, but won't happen in
a cluster due to the necessity of acquiring a lock first.

The *raid* tests have been updated to allow testing in a cluster.
For the most part, this meant creating devices with '-aey' if they
were to be converted to RAID.  (RAID requires the converting LV to
be EX because it is a condition of activation for the RAID LV in
a cluster.)
2013-09-10 16:33:22 -05:00
Zdenek Kabelac
d89b514e06 cleanup: drop within comment gcc warning
toollib.c:69:24: warning: "/*" within comment
2013-09-09 12:17:11 +02:00
Alasdair G Kergon
10a5838a60 toollib: tweak background forking
Log what is forked and replace #if 1 with DEBUG_CHILD.
2013-09-06 01:49:43 +01:00
Alasdair G Kergon
96880102a3 logging: Write Completed message before resetting. 2013-09-06 01:47:41 +01:00
Alasdair G Kergon
5face2010d tools: Use backgroundfork_ARG for pvscan -b
Change pvscan -b to use a new backgroundfork_ARG instead of
background_ARG so as not to affect pvmove -b and lvconvert -b.
2013-09-06 01:43:24 +01:00
Jonathan Brassow
cc66dedc0e pvmove: Skip pvmove of RAID, thin, snapshot, origin, and mirror LVs in cluster
pvmove of the above types should only have been enabled in single machine
mode.
2013-09-03 13:17:01 -05:00
Peter Rajnoha
3b51f298bb reinstate: commit 82d83a01ce
It now works as supposed. The source of the problem is fixed
by previous commit d2d6a9da52e04f28e1916bcea3f9fda356b6df29.
2013-09-03 16:49:21 +02:00
Peter Rajnoha
008c33a21b tools: add -b/--background for pvscan --cache -aay
Udev daemon has recently introduced a limit on the number of udev
processes (there was no limit before). This causes a problem
when calling pvscan --cache -aay in lvmetad udev rules which
is supposed to activate the volumes. This activation is itself
synced with udev and so it waits for the activation to complete
before the pvscan finishes. The event processing can't continue
until this pvscan call is finished.

But if we're at the limit with the udev process count, we can't
instatiate any more udev processes, all such events are queued
and so we can't process the lvm activation event for which the
pvscan is waiting.

Then we're in a deadlock since the udev process with the
pvscan --cache -aay call waits for the lvm activation udev
processing to complete, but that will never happen as there's
this limit hit with the number of udev processes.

The process with pvscan --cache -aay actually times out eventually
(3min or 30sec, depends on the version of udev).

This patch makes it possible to run the pvscan --cache -aay
in the background so the udev processing can continue and hence
we can avoid the deadlock mentioned above.
2013-09-03 16:49:21 +02:00
Peter Rajnoha
6a5838a69c pvscan: show -aay with --cache for help 2013-09-03 09:51:30 +02:00
Peter Rajnoha
44c1a02c18 revert: commit 82d83a01ce
The commit 82d83a01ce
"autoactivation: refresh existing VG before autoactivation"
causes problems (dangling udev_sync cookies, slow processing
of the pvscan --cache --major --minor call from udev rules)
when the autoactivation handler is run in parallel on
several PVs that belong to the same VG. Revert this patch
until the exact source of the problem is found and then
properly fixed and handled.
2013-09-02 13:53:27 +02:00
Jonathan Brassow
2ef48b91ed pvmove: Allow moving snapshot/origin. Disallow converting and merging LVs
The patch allows the user to also pvmove snapshots and origin logical
volumes.  This means pvmove should be able to move all segment types.
I have, however, disallowed moving converting or merging logical volumes.
2013-08-26 16:36:30 -05:00
Jonathan Brassow
caa77b33f2 pvmove: Fix inability to specify LV name when moving RAID, mirror, or thin LV
Top-level LVs (like RAID, mirror or thin) are ignored when determining which
portions of an LV to pvmove.  If the user specified the name of an LV to
move and it was one of the above types, it would be skipped.  The code would
never move on to check whether its sub-LVs needed moving because their names
did not match what the user specified.

The solution is to check whether a sub-LVs is part of the LV whose name was
specified by the user - not just if there was a name match.
2013-08-26 14:12:31 -05:00
Zdenek Kabelac
6b416f837f thin: support lvchange for data and metadata
Support lvchange operation on stacked thin pool data and metadata
volumes.
2013-08-26 14:55:22 +02:00
Jonathan Brassow
448ff0119f pvmove: Ability to move thin volumes
The previous commit was missing the code to allow moving thin
volumes.
2013-08-23 09:13:14 -05:00
Jonathan Brassow
c59167ec13 pvmove: Add support for RAID, mirror, and thin
This patch allows pvmove to operate on RAID, mirror and thin LVs.
The key component is the ability to avoid moving a RAID or mirror
sub-LV onto a PV that already has another RAID sub-LV on it.
(e.g. Avoid placing both images of a RAID1 LV on the same PV.)

Top-level LVs are processed to determine which PVs to avoid for
the sake of redundancy, while bottom-level LVs are processed
to determine which segments/extents to move.

This approach does have some drawbacks.  By eliminating whole PVs
from the allocation list, we might miss the opportunity to perform
pvmove in some senarios.  For example, if we have 3 devices and
a linear uses half of the first, a RAID1 uses half of the first and
half of the second, and a linear uses half of the third (FIGURE 1);
we should be able to pvmove the first device (FIGURE 2).
	FIGURE 1:
        [ linear ] [ -RAID- ] [ linear ]
        [ -RAID- ] [        ] [        ]

	FIGURE 2:
        [  moved ] [ -RAID- ] [ linear ]
        [  moved ] [ linear ] [ -RAID- ]
However, the approach we are using would eliminate the second
device from consideration and would leave us with too little space
for allocation.  In these situations, the user does have the ability
to specify LVs and move them one at a time.
2013-08-23 08:57:16 -05:00
Peter Rajnoha
99fd710cfd dumpconfig: also mention profilable type if giving hint about known types 2013-08-19 08:32:03 +02:00
Alasdair G Kergon
d8b781e8ab dmsetup: display any message output from kernel
Recent kernels allow messages to respond with a string.
Add dm_task_get_message_response() to libdevmapper to perform some
basic sanity checks and return this.
Have 'dmsetup message' display any response.

DM statistics will make extensive use of this.

(From Mikulas.)
2013-08-16 15:25:39 +01:00
Peter Rajnoha
82d83a01ce autoactivation: refresh existing VG before autoactivation
When autoactivating a VG, there could be an existing VG with exactly
the same PV UUIDs. The PVs could be reappeared after previous
loss/disconnect (for example disconnecting and reconnecting iscsi).

Since there's no "autodeactivation" yet, the mappings for the LVs
from the VG were left in the system even if the device was disconnected.
These mappings also hold the major:minor of the underlying device.
So if the device reappears, it is assigned a different major:minor
pair (...and kernel name). We need to cope with this during
autoactivation so any existing mappings are corrected for any changes.
The VG refresh does that (the vgchange --refresh functionality) -
call this before VG autoactivation.

(If the VG does not exist yet, the VG refresh is NOP)
2013-08-14 14:04:58 +02:00
Alasdair G Kergon
80bcdb93ff filters: check for mpath before opening devs
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.

When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.

Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.

Log each filter initialisation to show sequence.

Avoid duplicate 'Using $device' debug messages.
2013-08-13 23:26:58 +01:00
Petr Rockai
0da72743ca vgck: Fix #894136, notice on-disk corruption in spite of lvmetad. 2013-08-13 23:25:49 +02:00
Alasdair G Kergon
1a1d3a10ff vgchange: require confirmation with -c and no VGs
Too many people have been running 'vgchange -cy' by mistake
so add a confirmation prompt.  Use --yes to bypass this.
2013-08-13 18:20:11 +01:00
Jonathan Brassow
bb457adbb6 RAID: Fix bug making lvchange unable to change recovery rate for RAID
Commit ID 8615234c0f failed to include
the actual code changes that were made to fix the bug.  Instead, all
tests went in to validate the bug fix.  This patch adds the missing
code changes.
2013-08-12 12:43:47 -05:00
Jonathan Brassow
8615234c0f RAID: Fix bug making lvchange unable to change recovery rate for RAID
1) Since the min|maxrecoveryrate args are size_kb_ARGs and they
   are recorded (and sent to the kernel) in terms of kB/sec/disk,
   we must back out the factor multiple done by size_kb_arg.  This
   is already performed by 'lvcreate' for these arguments.
2) Allow all RAID types, not just RAID1, to change these values.
3) Add min|maxrecoveryrate_ARG to the list of 'update_partial_unsafe'
   commands so that lvchange will not complain about needing at
   least one of a certain set of arguments and failing.
4) Add tests that check that these values can be set via lvchange
   and lvcreate and that 'lvs' reports back the proper results.
2013-08-09 17:09:47 -05:00
Zdenek Kabelac
e583ff3d2c thin: thin pool can't be external origin
Avoid trying to convert thin-pool to external origin.
2013-08-09 23:04:30 +02:00
Jonathan Brassow
b15278c3dc Mirror/RAID1: When up|down-converting default to segtype of current LV
If there is no RAID support in the kernel but the default mirror
segtype is "raid1", converting legacy mirrors can be problematic.
For example, changing the log type or converting a mirror to a linear
LV does not require the RAID modules to be present.  However, because
lp->segtype is set to be RAID1 by the configuration file, the command
fails.

We should only be setting lp->segtype when converting mirrors if it is
going to change (e.g. to linear or between mirror types).
2013-08-07 16:01:45 -05:00
Zdenek Kabelac
139a62fc0b thin: use pipe_open instead of popen
Use new function to directly exec command and read its output.
2013-08-06 16:19:31 +02:00
Peter Rajnoha
41e64b72ab thin: chunk_size check already part of get_profilable_pool_params fn 2013-08-06 11:46:48 +02:00
Peter Rajnoha
e195b5227e thin: apply VG profile if creating a new thin pool
When creating a new thin pool and there's no profile requested
via "lvcreate --profile ...", inherit any VG profile if it's attached.

Currently this applies to these settings:
  allocation/thin_pool_chunk_size
  allocation/thin_pool_discards
  allocation/thin_pool_zero
2013-08-06 11:42:40 +02:00
Zdenek Kabelac
de0cba0e2d thin: initial --repair support for pools
Initial basic support for repair.
It currently takes pool metadata spare volume, which
is used for recovery.  New spare is created if the volume
is successfuly repaired.

After the operation the previous _tmeta volume is moved
into  _tmeta%d volume and if everything is ok, this volume
could be removed.
New _tmeta needs to be pvmoved to proper place and also
converted to i.e. mirror if it should be mirrored.

Later version will try to automate some steps here.
2013-07-31 15:32:36 +02:00
Alasdair G Kergon
d13e87b9ef cleanup: comments and a message 2013-07-24 22:10:37 +01:00
Zdenek Kabelac
da5284a500 thin: lvconvert cannot convert pool to mirror
Suggest to use _tdata and _tmeta devices for that.
This fixes regression from too relaxed change in
f1d5f6ae81

Without this patch there are some empty LVs created before
mirror code recognizes it cannot continue.

(in release fix)
2013-07-24 17:17:19 +02:00
Jonathan Brassow
d00d45a8b6 Clean-up: Addressing a few FIXME's
Three fixme's addressed in this commit:
1) lib/metadata/lv_manip.c:_calc_area_multiple() - this could be
   safely changed to a comment explaining that currently because
   RAID10 can only have a 2-way mirror, we don't need to know the
   number of stripes.  However, we will need to know that in the
   future if RAID10 is to support more than 2-way mirroring.

2) lib/metadata/mirror.c:_delete_lv() - should have been calling
   _activate_lv_like_model() with 'mirror_lv'.  This is because
   'mirror_lv' is the LV that the overall operation is being
   performed on.  We need to use this LV as the basis for
   determining whether to activate locally, or across the
   cluster, etc.

3) tools/lvcreate.c:_lvcreate_params() - Minor clean-up.  If
   '-m 0' is given, treat it as though the mirroring argument
   was not given (i.e. as though the requested segment type
   was 'stripe' and not mirror).
2013-07-23 14:46:22 -05:00
Peter Rajnoha
31de670318 lvconvert: add more checks for lvconvert --type
The --type mirror requires -m/--mirrrors:

  lvconvert --type mirror vg/lvol0
    --type mirror requires -m/--mirrors
    Run `lvconvert --help' for more information.

The --type raid* is allowed (the checks already existed):

  lvconvert --type raid10 vg/lvol0
    Converting the segment type for vg/lvol0 from linear to raid10 is not yet supported.

The --type snapshot is a synonym to -s/--snapshot:

  lvconvert -s vg/lvol0 vg/lvol1
    Logical volume lvol1 converted to snapshot.

  lvconvert --type snapshot vg/lvol0 vg/lvol1
    Logical volume lvol1 converted to snapshot.

All the other segment types are not supported, e.g.:

  lvconvert --type zero vg/lvol0
    Conversion using --type zero is not supported.
    Run `lvconvert --help' for more information.
2013-07-23 17:13:54 +02:00
Alasdair G Kergon
3670fe92ba cleanup: suppress compiler warning 2013-07-23 13:32:47 +01:00
Petr Rockai
3fdb45d040 pvscan: Respect lvmetad (global) filter in --cache w/ a device. 2013-07-22 15:05:39 +02:00
Zdenek Kabelac
f1d5f6ae81 lvconvert: drop limit on thin pool conversion 2013-07-22 12:41:22 +02:00
Zdenek Kabelac
c394c2a624 dumpconfig: check conf tree was created
Missing error path.
2013-07-22 12:41:21 +02:00
Alasdair G Kergon
ccc29f17b6 cmdline: support ARG_GROUPABLE in merge_synonym 2013-07-19 20:37:43 +01:00
Alasdair G Kergon
90a09559ed commandline: add prefix aliases for raid options
Accept --raidwritemostly as well as --writemostly etc.
2013-07-19 19:24:54 +01:00
Zdenek Kabelac
ef3a1a0f8a thin: vgsplit and vgmerge spare support
When spliting a VG with spare, update to which VG it will belong.

When merging and both VGs have spare, unmark the smaller one first.
2013-07-18 18:22:44 +02:00
Zdenek Kabelac
aab53f46ee thin: add lvconvert pool metadata spare
Support poolmetadataspare when convering volumes into thin pool.
Same rules applied as with lvcreate.
2013-07-18 18:22:44 +02:00
Zdenek Kabelac
3075784955 thin: add spare lvcreate support
Add --poolmetadataspare option and creates and handles
pool metadata spare lv when thin pool is created.
With default setting 'y' it tries to ensure, spare has
at least the size of created LV.
2013-07-18 18:22:44 +02:00
Zdenek Kabelac
460d0254eb thin: add pool metadata spare lv support
Add support for pool's metadata spare volume.
2013-07-18 18:22:43 +02:00
Zdenek Kabelac
20187fc190 cleanup: use dm_list_empty
Check for empty list directly.
2013-07-18 18:22:42 +02:00
Zdenek Kabelac
9ba7783350 cleanup: update comments
Add and indent.
2013-07-15 15:40:46 +02:00
Peter Rajnoha
ab789c1bcf tools: add --setactivationskip and --ignoreactivationskip to vgchange/lvchange
The lvchange has both -k/--setactivationskip and
-K/--ignoreactivationskip option available for use.

The vgchange has only -K/--ignoreactivationskip, but
not the -k/--setactivationskip as the ACTIVATION_SKIP
flag is an LV property, not a VG one and so we change it
only by using the lvchange...
2013-07-12 20:49:57 +02:00
Peter Rajnoha
7dc8c84b18 activation: add support for skipping activation of selected LVs
Also add -k/--setactivationskip y/n and -K/--ignoreactivationskip
options to lvcreate.

The --setactivationskip y sets the flag in metadata for an LV to
skip the LV during activation. Also, the newly created LV is not
activated.

Thin snapsots have this flag set automatically if not specified
directly by the --setactivationskip y/n option.

The --ignoreactivationskip overrides the activation skip flag set
in metadata for an LV (just for the run of the command - the flag
is not changed in metadata!)

A few examples for the lvcreate with the new options:

  (non-thin snap LV => skip flag not set in MDA + LV activated)
  raw/~ $ lvcreate -l1 vg
    Logical volume "lvol0" created
  raw/~ $ lvs -o lv_name,attr vg/lvol0
    LV    Attr
    lvol0 -wi-a----

  (non-thin snap LV + -ky => skip flag set in MDA + LV not activated)
  raw/~ $ lvcreate -l1 -ky vg
    Logical volume "lvol1" created
  raw/~ $ lvs -o lv_name,attr vg/lvol1
    LV    Attr
    lvol1 -wi------

  (non-thin snap LV + -ky + -K => skip flag set in MDA + LV activated)
  raw/~ $ lvcreate -l1 -ky -K vg
    Logical volume "lvol2" created
  raw/~ $ lvs -o lv_name,attr vg/lvol2
    LV    Attr
    lvol2 -wi-a----

  (thin snap LV => skip flag set in MDA (default behaviour) + LV not activated)
  raw/~ $ lvcreate -L100M -T vg/pool -V 1T -n thin_lv
    Logical volume "thin_lv" created
  raw/~ $ lvcreate -s vg/thin_lv -n thin_snap
    Logical volume "thin_snap" created
  raw/~ $ lvs -o name,attr vg
    LV        Attr
    pool      twi-a-tz-
    thin_lv   Vwi-a-tz-
    thin_snap Vwi---tz-

  (thin snap LV + -K => skip flag set in MDA (default behaviour) + LV activated)
  raw/~ $ lvcreate -s vg/thin_lv -n thin_snap -K
    Logical volume "thin_snap" created
  raw/~ $ lvs -o name,attr vg/thin_lv
    LV      Attr
    thin_lv Vwi-a-tz-

  (thins snap LV + -kn => no skip flag in MDA (default behaviour overridden) + LV activated)
  [0] raw/~ # lvcreate -s vg/thin_lv -n thin_snap -kn
    Logical volume "thin_snap" created
  [0] raw/~ # lvs -o name,attr vg/thin_snap
    LV        Attr
    thin_snap Vwi-a-tz-
2013-07-12 20:39:07 +02:00
Peter Rajnoha
4d19fa9582 lvchange: backup VG after changing profile 2013-07-11 12:25:10 +02:00
Peter Rajnoha
953a438e93 dumpconfig: add --type profilable
The --type profilable shows all config settings that
are customizable by profiles:

  raw/~ $ lvm dumpconfig --type profilable
  allocation {
	  thin_pool_zero=1
	  thin_pool_discards="passdown"
	  thin_pool_chunk_size=64
  }
  activation {
	  thin_pool_autoextend_threshold=100
	  thin_pool_autoextend_percent=20
  }
2013-07-09 10:00:47 +02:00
Alasdair G Kergon
f56a1819e9 tools: remove metadata-exported.h
metadata-exported.h is included by tools.h
2013-07-09 03:07:55 +01:00
Alasdair G Kergon
9d5bdc91ca tools: remove metadata.h 2013-07-09 02:51:24 +01:00
Alasdair G Kergon
1280a3c7ed tools: remove metadata.h from pvresize/vgck 2013-07-09 02:41:56 +01:00
Alasdair G Kergon
8adddbf101 pvcreate: remove metadata.h header
Files in tools/ should only use metadata-exported.h not metadata.h.
Rename pvcreate_locked to pvcreate_single.
2013-07-09 02:37:56 +01:00
Alasdair G Kergon
dd302daf64 report: remove LV_CREATE_PARAMS report type
Remove LV_CREATE_PARAMS from lib/report as it is not a type of metadata.
Added by 4d5de8322b
2013-07-09 02:06:29 +01:00
Peter Rajnoha
5ed7d0cf1d dumpconfig: add --mergedconfig option
Normally, the lvm dumpconfig processes only the configuration tree
that is at the top of the cascade. Considering the cascade is:

  CONFIG_STRING -> CONFIG_PROFILE -> CONFIG_MERGED_FILES/CONFIG_FILE

...then:

  (dumpconfig of lvm.conf only)
  raw/~ $ lvm dumpconfig allocation
  allocation {
	  maximise_cling=1
	  mirror_logs_require_separate_pvs=0
	  thin_pool_metadata_require_separate_pvs=0
	  thin_pool_chunk_size=64
  }

  (dumpconfig of selected profile configuration only)
  raw/~ $ lvm dumpconfig --profile test allocation
  allocation {
	  thin_pool_chunk_size=8
	  thin_pool_discards="passdown"
	  thin_pool_zero=1
  }

  (dumpconfig of given --config configuration only)
  raw/~ $ lvm dumpconfig --config 'allocation{thin_pool_chunk_size=16}' allocation
  allocation {
	  thin_pool_chunk_size=16
  }

The --mergedconfig option causes the configuration cascade to be
merged before processing it with dumpconfig:

  (dumpconfig of merged selected profile and lvm.conf)
  raw/~ $ lvm dumpconfig --profile test allocation --mergedconfig
  allocation {
	  maximise_cling=1
	  thin_pool_zero=1
	  thin_pool_discards="passdown"
	  mirror_logs_require_separate_pvs=0
	  thin_pool_metadata_require_separate_pvs=0
	  thin_pool_chunk_size=8
  }

  (dumpconfig merged given --config and selected profile and lvm.conf)
  raw/~ $ lvm dumpconfig --profile test --config 'allocation{thin_pool_chunk_size=16}' allocation --mergedconfig
  allocation {
	  maximise_cling=1
	  thin_pool_zero=1
	  thin_pool_discards="passdown"
	  mirror_logs_require_separate_pvs=0
	  thin_pool_metadata_require_separate_pvs=0
	  thin_pool_chunk_size=16
  }

Hence with the --mergedconfig, we are able to see the
configuration that is actually used when processing any
LVM command while using any combination of --config/--profile
options together with lvm.conf file.
2013-07-08 16:05:56 +02:00
Peter Rajnoha
661406a417 config: fix use of last config check status if creating CFG_DEF_TREE_MISSING tree
When CFG_DEF_TREE_MISSING is created, it needs to know the status
of the check done on the tree used (the CFG_USED flag).

This bug was introduced with f1c292cc38
"make it possible to run several instances of configuration check at
once". This patch separated the CFG_USED and CFG_VALID flags in
a separate 'status' field in struct cft_check_handle.

However, when creating some trees, like CFG_DEF_TREE_MISSING,
we need this status to do a comparison with full config definition
to determine which items are missing and for which default values
were used. Otherwise, all items would be considered missing.

So, pass this status in a new field called 'check_status' in
struct config_def_tree_spec that defines how the (dumpconfig) tree
should be constructed (and this struct is passed to
config_def_create_tree fn then).
2013-07-08 15:57:49 +02:00
Peter Rajnoha
f5584d4203 cleanup: cleanup dumpconfig code 2013-07-08 15:46:19 +02:00
Zdenek Kabelac
edf5cae679 pvremove: stack trace
Stack trace error.
Remove unused var.
2013-07-08 14:01:41 +02:00
Zdenek Kabelac
ccf3dd60f2 cleanup: remove tab 2013-07-08 14:01:41 +02:00
Zdenek Kabelac
c5d253f315 cleanup: use arg value
Use defined ARG_COUNT for the last element
2013-07-08 14:01:41 +02:00
Alasdair G Kergon
7c6526aae2 lvresize: separate validation from action
Start separating the validation from the action in the basic lvresize
code moved to the library.
Remove incorrect use of command line error codes from lvresize library
functions.  Move errors.h to tools directory to reinforce this,
exporting public versions of the error codes in lvm2cmd.h for dmeventd
plugins to use.
2013-07-06 03:28:21 +01:00
Zdenek Kabelac
a0ce432829 lvconvert: fix last commit
Condition needs to check for passed in pool_metadata_lv_name
which needs to be renamed to _tmeta, for !pool_metadata_lv_name
it's already created with correct _tmeta name.
2013-07-04 14:02:27 +02:00
Zdenek Kabelac
969c87fa5b thin: swap if branch
Move shorter if branch in front.
Use buffer for _tmeta and _tdata names so too long name
of LV is earlier detected.
2013-07-04 13:33:41 +02:00
Zdenek Kabelac
f88f5a1ca3 thin: move alloc_pool_metadata
Move function from /tool to /lib to thin_manip.c
Since lvm2api will need to move many things into /lib anyway.
2013-07-04 13:33:41 +02:00
Zdenek Kabelac
6f335ffa35 sigint: improve logic on for sigint reaction
Fix and improve handling on sigint.

Always check for signal presence *before* calling of command,
so it will not call the command when break was hit.

If the command has been finished succesfully there is
no problem to mark the command ok and not report interrupt at all.

Fix cuple related stack; reports and assignments.
2013-07-03 14:46:42 +02:00
Zdenek Kabelac
eeb164b50f lvconvert: use proper error path
VG needs to be released in this error path
2013-07-03 14:44:51 +02:00
Mike Snitzer
fe09d84668 lvconvert: Rename _swap_lv to _swap_lv_identifiers and move to allow an additional user 2013-07-02 17:02:25 -04:00
Mike Snitzer
f9e0adcce5 snapshot: Rename snapshot segment returning methods from find_*_cow to find_*_snapshot
find_cow -> find_snapshot, find_merging_cow -> find_merging_snapshot.
Will thin snapshot code to reuse these methods without confusion.
2013-07-02 16:26:03 -04:00
Tony Asleson
50db109e20 liblvm: Moved additional pv resize code
The pv resize code required that a lvm_vg_write be done
to commit the change.  When the method to add the ability
to list all PVs, including ones that are not assocated with
a VG we had no way for the user to make the change persistent.
Thus additional resize code was move and now liblvm calls into
a resize function that does indeed write the changes out, thus
not requiring the user to explicitly write out he changes.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:34 -05:00
Tony Asleson
6d6ccded35 lib2app: Added PV create. V2
V2: Correct call to lock_vol

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:34 -05:00
Tony Asleson
e33ac7b1ed lvm2app: Implement lvm_pv_remove V2
Code move and changes to support calling code from
command line and from library interface.

V2 Change lock_vol call

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:34 -05:00
Tony Asleson
c43ce46ba7 lvm2app: Move core lv re-size code (v6)
Moved to allow use from command line and for library use.

v3,v4,v5,v6: rebase changes

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Tony Asleson
9d550cfc36 lvm2app: Rework argument handling for lv resize
Extend the lv resize parameter structure to contain everything
the re-size functions need so that the command line does not
need to be present for lower level calls when we call from
library functions.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Tony Asleson
60c78e6aef lvm2app: Move percent_of_extents to lvm-percent.[h|c]
Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Tony Asleson
4d5de8322b lvm2app: Add thin and thin pool lv creation V5
Add thin and thin pool lv creation support to lvm library

This is Mohan's thinp patch, re-worked to include suggestions
from Zdenek and Mohan.

V2: Remove const lvm_lv_params_create_thin
    Add const lvm_lv_params_skip_zero_get

V3: Changed get/set to use generic functions like current
    property

V4: Corrected macro in properties.c

V5: Fixed a bug in liblvm/lvm_lv.c function lvm_lv_create.
    incorrectly used pool instead of lv_name when doing the
    find_lv_in_vg call.

Based on work done by M. Mohan Kumar <mohan@in.ibm.com>

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Peter Rajnoha
24a84549a8 thin: make selected thinp settings profilable
These settins are customizable by profiles:

	allocation/thin_pool_zero
	allocation/thin_pool_discards
	allocation/thin_pool_chunk_size
	activation/thin_pool_autoextend_threshold
	activation/thin_pool_autoextend_percent
2013-07-02 15:22:11 +02:00
Peter Rajnoha
f1c292cc38 config: make it possible to run several instances of configuration check at once
Before, the status of the configuration check (config_def_check fn call)
was saved directly in global configuration definitinion array (as part
of the cfg_def_item_t/flags)

This patch introduces the "struct cft_check_handle" that defines
configuration check parameters as well as separate place to store
the status (status here means CFG_USED and CFG_VALID flags, formerly
saved in cfg_def_item_t/flags). This struct can hold config check
parameters as well as the status for each config tree separately,
thus making it possible to run several instances of config_def_check
without interference.
2013-07-02 15:22:11 +02:00
Peter Rajnoha
8769033e07 toolcontext: add a few comments for struct cmd_context and rename config_valid -> config_initialized
Just to make it more clear and also not to confuse
config_valid with check against config definition
(and its 'valid' flag within the config defintion tree).
2013-07-02 15:22:11 +02:00
Peter Rajnoha
0cd4794735 tools: add support for changing configuration profile for existing volumes (vgchange/lvchange)
The command to change the profile for existing VG/LV:
	"vgchange/lvchange --profile <profile_name>"

The command to detach any existing profile from VG/LV:
	"vgchange/lvchange --detachprofile"
2013-07-02 15:22:10 +02:00
Peter Rajnoha
e21e38cf74 metadata: add support for storing profile name in metadata (during vgcreate/lvcreate)
If "vgcreate/lvcreate --profile <profile_name>" is used, the profile
name is automatically stored in metadata for making it possible to
load it automatically next time the VG/LV is used.
2013-07-02 15:19:09 +02:00
Peter Rajnoha
d6a91da4be config: add profile arg to find_config_tree_bool 2013-07-02 15:19:09 +02:00
Peter Rajnoha
50bf2c0db1 config: add profile arg to find_config_tree_int 2013-07-02 15:19:09 +02:00
Peter Rajnoha
06dd66af54 config: add profile arg to find_config_tree_str 2013-07-02 15:19:09 +02:00