IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the 'act' has been already processed by add_client_result()
it could have been possibly release - so avoid accessin 'act->'
afterward and go for next item directly.
with fork and exec to avoid use of shell.
largely copied from lib/misc/lvm-exec.c
require lvmlockctl_kill_command to be full path
use lvm config instead of lvmconfig to avoid need for LVM_DIR
Switch remaining zero sized struct to flexible arrays to be C99
complient.
These simple rules should apply:
- The incomplete array type must be the last element within the structure.
- There cannot be an array of structures that contain a flexible array member.
- Structures that contain a flexible array member cannot be used as a member of another structure.
- The structure must contain at least one named member in addition to the flexible array member.
Although some of the code pieces should be still improved.
The lock adopt feature was disabled since it had used
lvmetad as a source of info. This replaces the lvmetad
info with a local file and enables the adopt feature again
(enabled with lvmlockd --adopt 1).
Update the previous commit to leave the vgname as
an arg instead of moving it into the select option,
(the compound select option rule is confusing the
dlm arg processing.)
Using --select 'lvname=LV && vgname=VG' avoids the problem
of the lvchange exit code not distinguishing an actual error
result vs the VG or LV not existing. (This is in case there
is an odd dlm/gfs2 setup where some nodes are running the dlm
but do not have access to the VG.)
When lvextend extends an LV that is active with a shared
lock, use this as a signal that other hosts may also have
the LV active, with gfs2 mounted, and should have the LV
refreshed to reflect the new size. Use the libdlmcontrol
run api, which uses dlm_controld/corosync to run an
lvchange --refresh command on other cluster nodes.
When an LV is active with a shared lock, a command can be
run to change the LV with --lockopt skiplv (to override the
exclusive lock the command ordinarily requires which is not
compatible with the outstanding shared lock.)
In this case, other commands may have the LV active and may
need to refresh the LV, so print warning stating this.
If there are two independent scripts doing:
vgchange --lockstart vg
lvchange -ay vg/lv
The first vgchange to do the lockstart will wait for
the lockstart to complete before returning.
The second vgchange to do the lockstart will see that
the start is already in progress (from the first) and
will do nothing. This means the second does not wait
for any lockstart to complete, and moves on to the
lvchange which may find the lockspace still starting
and fail.
To fix this, make the vgchange lockstart command
wait for any lockstart's in progress to complete.
Ensure configure.h is always 1st. included header.
Maybe we could eventually introduce gcc -include option, but for now
this better uses dependency tracking.
Also move _REENTRANT and _GNU_SOURCE into configure.h so it
doesn't need to be present in various source files.
This ensures consistent compilation of headers like stdio.h since
it may produce different declaration.
When sanlock_release returns an error because of an i/o
timeout releasing the lease on disk, lvmlockd should just
consider the lock released. sanlock will continue trying
to release the lease on disk after the original request
times out.
The choice about sector size and lease align size is
now made by the sanlock user, in this case lvmlockd.
This will allow lvmlockd to use other lease sizes in
the future. This also prevents breakage if hosts
report different sector sizes, or the sector size
reported by a device changes.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
The device-mapper directory now holds a copy of libdm source. At
the moment this code is identical to libdm. Over time code will
migrate out to appropriate places (see doc/refactoring.txt).
The libdm directory still exists, and contains the source for the
libdevmapper shared library, which we will continue to ship (though
not neccessarily update).
All code using libdm should now use the version in device-mapper.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
When sanlock or dlm lock managers return an error number
that we don't recognize, replace it with a generic -ELMERR
which is defined in the set of special lvmlockd error
numbers. Otherwise, an unknown lock manager error number
could be misinterpreted for something else if it happened
to overlap another set of error numbers (which they have
not thus far.)
These less common errors returned from sanlock should
also cause sanlock to retry the lock acquire:
- i/o timeout occurs during sanlock_acquire().
other i/o on the same disk as the leases can cause
sanlock i/o timeouts.
- low level disk paxos contention between hosts naturally
causes one host to not acquire the lease. There are a
couple special error numbers associated with these cases
that should just be recognized as a normal failure to
acquire the lease.
gcc warns here about storring 69 bytes in 64 byte array (losing
potentially 4 bytes from 'ls->name').
lvmlockd-core.c:2657:36: warning: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size 60 [-Wformat-truncation=]
snprintf(tmp_name, MAX_NAME, "REM:%s", ls->name);
^~
lvmlockd-core.c:2657:2: note: ‘snprintf’ output between 5 and 69 bytes into a destination of size 64
snprintf(tmp_name, MAX_NAME, "REM:%s", ls->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replaced with slightly better code - but it still misses error path what
to do if the name would be truncated... - so added FIXME.
Also using all bytes for snprintf() buffer size
(as the size is with \0 included)
currently, lvcreate for sanlock find the free lock offset
from the beginning of the lvmlock every time.
after created thousands of lvs, it will issue thousands of read
ios for lvcreate to find free lock offset.
remeber the last free lock offset will greatly reduce the impact
Signed-off-by: Zhang Huan <zhanghuan@huayun.com>
Check first if we need to even link -lrt - since clock functions
are normally emebeded with recent glibc (>=2.17)
Use standard RT_LIBS name.
Avoid duplicate test for realtime clock with lvmlockd
Show better error message when realtime clock support is missing or
disabled.
Link RT_LIBS explicitely with lvmlockd and lvmetad.
Avoid adding -g more then once for debug builds.
Avoid enabling DEBUG_MEM when we build multithreaded tools.
Link executables with -fPIE -pie and --export-dynamic LDFLAGS
Introduce PROGS_FLAGS to add option to pass flags for external libs.
Link lvm2 internally library only when really used.
Link DAEMON_LIBS with daemons.
Pass VALGRIND_CFLAGS internally
Set shell failure mode on couple places.
API for strtod() or strtoul() needs reset of errno, before it's being
called. So add missing resets in missing places and some also some
errno validation for out-of-range numbers.
1. dm_uuid is 68 byte length, but buf is 64 which
will cause miss match uuid from lv lock manager
2. no lv lock_type path in dm config, use lock_args instead
Signed-off-by: Zhang Huan <zhanghuan@chinac.com>
If the VG holding the global lock is removed, we can indicate
that as the reason for not being able to acquire the global
lock in subsequent error messages, and can suggest enabling
the global lock in another VG. (This helpful error message
will go away if the global lock is enabled in another VG,
or if lvmlockd is restarted.)
Reconnect to lvmetad if either the send fails (e.g. lvmetad
was restarted since lvmlockd last connected), or if no
lvmetad connection exists (e.g. lvmetad was started after
lvmlockd so no previous connection existed.)
All the variables for sscanf in lvmlockctl.c and lvmlockd-sanlock.c are
zeroed before sscanf call so the failure is detected by seeing the zero
value instead of proper one in subsequent code - so use (void) for
sscanf calls to ignore return value here.
After the lockspace has been successfully removed,
invalidate the name field in the lockspace struct.
The struct remains on the list of lockspaces until
the struct can be freed later. Until the struct is
freed, its name will prevent another new lockspace
from being created with the same name.
Make the lvb validation rules for convert match
those for unlock (even though it would be very
unlikely or impossible for convert to deal with
zero lvb.)
Have commands send lvmlockd the update message
in vg_write instead of vg_commit, so that it's
not done while LVs are suspended. If the vg_write
is not committed, and the seqno sent to lvmlockd
is not used, then lvmlockd can detect this when
the next update uses the same seqno.
