IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When a VG has PVs with different device id types,
it would try to use the idtype of the previous PV
in the loop. This would produce an unncessary warning,
or could lead to using the devname idtype when a better
idtype is available.
Change messages that refer to devices being "excluded by filters"
to say just "excluded". This will avoid mistaking the word
"filters" with the lvm.conf filter setting.
Use dev_cache_get_existing() in a few common, high level
locations where it's obvious that only existing dev-cache
entries are wanted. This can be expanded and used in more
locations (or dev_cache_get can stop creating new entries.)
. error exit means that lvmdevices --update would make a change.
. remove check of PART field from --check because it isn't used.
. unlink searched_devnames file to ensure check|update will search
Help bootstrapping existing shared vgs into the devices file.
Reading the vg in vgimportdevices would require locking to be
started, but vgchange lockstart won't see the vg if it's not
in the devices file. The lvmlockd locks are not protecting
vg modifications so skipping them here won't be a problem.
Resolve event_activation configure option just once.
Do not print debug_devs about 'bad' filtering, when
actually filter already printed reason for skipping
Do not trace more then once about backup being disabled.
No debug when unlinked file does not exists in pvscan.
Reporting non-PVs / "all devices" is only done by
pvs -a or pvdisplay -a, so avoid the work managing
a list of all devices in process_each_pv.
In the case when it's needed, use the results of
label_scan which already determines which devs
are not PVs.
Configure via lvm.conf log/journal or command line --journal.
Possible values:
"command" records command information.
"output" records default command output.
"debug" records full command debugging.
Multiple values can be set in lvm.conf as an array.
One value can be set in --journal which is added to
values set in lvm.conf
pvscan --cache <dev>
. read only dev
. create online file for dev
pvscan --listvg <dev>
. read only dev
. list VG using dev
pvscan --listlvs <dev>
. read only dev
. list VG using dev
. list LVs using dev
pvscan --cache --listvg [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. [check online files and report if VG is complete]
pvscan --cache --listlvs [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. list LVs using dev
. [check online files and report if VG is complete]
. [check online files and report if LVs are complete]
[--vgonline]
can be used with --checkcomplete, to enable use of a vg online
file. This results in only the first pvscan command to see
the complete VG to report 'VG complete', and others will report
'VG finished'. This allows the caller to easily run a single
activation of the VG.
[--udevoutput]
can be used with --cache --listvg --checkcomplete, to enable
an output mode that prints LVM_VG_NAME_COMPLETE='vgname' that
a udev rule can import, and prevents other output from the
command (other output causes udev to ignore the command.)
The list of complete LVs is meant to be passed to lvchange -aay,
or the complete VG used with vgchange -aay.
When --checkcomplete is used, lvm assumes that that the output
will be used to trigger event-based autoactivation, so the pvscan
does nothing if event_activation=0 and --checkcomplete is used.
Example of listlvs
------------------
$ lvs -a vg -olvname,devices
LV Devices
lv_a /dev/loop0(0)
lv_ab /dev/loop0(1),/dev/loop1(1)
lv_abc /dev/loop0(3),/dev/loop1(3),/dev/loop2(1)
lv_b /dev/loop1(0)
lv_c /dev/loop2(0)
$ pvscan --cache --listlvs --checkcomplete /dev/loop0
pvscan[35680] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
LV vg/lv_a complete
LV vg/lv_ab incomplete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop1
pvscan[35681] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
LV vg/lv_b complete
LV vg/lv_ab complete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop2
pvscan[35682] PV /dev/loop2 online, VG vg is complete.
VG vg complete
LV vg/lv_c complete
LV vg/lv_abc complete
Example of listvg
-----------------
$ pvscan --cache --listvg --checkcomplete /dev/loop0
pvscan[35684] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop1
pvscan[35685] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop2
pvscan[35686] PV /dev/loop2 online, VG vg is complete.
VG vg complete
With larger metadata, decoding 'localtime()' for hinting time creation
of every LV may cause excessive check of /etc/localtime file.
Set TZ to ":/etc/localtime" so glibc reads this file just once
instead of check everytime if there has anything changed.
It's basically irrelavant which value we assing to optarg,
since it's set by getopt() function, but Coverity tool
is incorrectly reporting possibly dereference of NULL.
Analyzer here was rather confused about possiblity of loosing previously
assigned device pointers - fixed by passing zero initialize memory
before first assign.
The cmd memory space is allocated by zalloc, and the registration
fails and is not released.
Although this code would be ever triggered just in the case
of some internal (likely compilation) bug.
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
When building lvm2 in Gentoo/ChromeOS with the ASAN memory
sanitizer enabled, man-generator fails with the following
error. Initializing makes the error go away.
* SUMMARY: MemorySanitizer: use-of-uninitialized-value /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3316:6 in _include_description_file
* Exiting
* ASAN error detected:
* ==2548047==WARNING: MemorySanitizer: use-of-uninitialized-value
* #0 0x558b00ab4730 in _include_description_file /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3316:6
* #1 0x558b00ab4730 in _print_man /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3426:21
* #2 0x558b00ab4730 in main /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3570:7
* #0 0x7fa9b2cbb807 in find_derivation /var/tmp/portage/cross-x86_64-cros-linux-gnu/glibc-2.33-r8/work/glibc-2.33/iconv/gconv_db.c:583:15
* #1 0x558b00a29559 in ?? ??:0
*
* Uninitialized value was created by an allocation of 'statbuf.i.i' in the stack frame of function 'main'
* #0 0x558b00ab1d4d in main /build/amd64-generic/tmp/portage/sys-fs/lvm2-2.02.187-r3/work/LVM2.2.02.187/tools/man-generator.c:3505
