IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When a command does a sequence of
vg_write + vg_commit + vg_write + vg_commit,
initialization of non-PV devices happens during the
first vg_write, and does not need to be repeated by
the second vg_write.
When creating a lockd VG, this sequence occurs because
the VG is first created, then the lockd data is created,
then the lockd data is then written to the VG metadata.
Avoid validation of free space in pool, when no messages are passed.
Patch a3c7e326c3 add new check for
pool overload - but this check should not be made if there are
no messages and transaction_id is still within 'bounds' (bigger by 1).
Commit 00b36ef06a had a typo
and missed '{' for shell variable, thus command used slightly
different 'tmp' dir name for cache dir (with extra '}').
Such change was unnoticed until a recent fix in persistent
filter, lvm2 missed to update cache file when --config
was specified.
The result was, /tmp dir was accumulating snap.XXXXX} dirs when
running vgimportclose script.
Since we may want to swap names when LVs are complex types, we cannot
avoid doing full renames on both LV stacks.
Temporarily use 'pvmove_tmeta' as unused name to prevent validation troubles.
Commit 9403edbb93 move location of
configure.h and lvm-version.h.
Let's try even better place then /conf dir which should be left
for user configurable files.
Put these files right into include dir.
This applies the same rule/logic to dlm VGs that has always
existed for sanlock VGs. Allowing a dlm VG to be removed
while its lockspace was still running on other hosts largely
worked, but there were difficult problems if another VG with
the same name was recreated. Forcing the VG lockspace to
be stopped, gives both sanlock and dlm VGs the same behavior.
This shortcut was added for an odd case that I do not
believe is relevant any more. Having an alternate
path for lockspace thread cleanup is a complication
that could lead to problems.
The code was expecting the wrong return value from
compare_config, which returns 0 when equal.
This is a problem for a lockd VG using multiple PVs
when the VG needs to be rescanned.
Somehow raid tests landed in plain cache - separte them out
so they properly check for have_raid.
Check we do not support strip option with cache-pool creation.
ATM allocation can't handle stripping and cache pool allocation.
It's not yet even clear what should be actually result.
Until resolved, disable this option (it's been coredumping
inside allocation anyway).
Certain stacks of cached LVs may have unexpected consequences.
So add a warning function called when LV is cached to detect
such caces and WARN user about them - the best we could do ATM.
When we insert layer we also move status flag-bits for certain LV types,
so internal volume_group structure remains consistent.
(Perhaps it's misuse of 'insert_layer' function and we should have
another similar function for this.)
Basically we aim to maintain the same state as after reading fresh
metadata out of volume group.
Currently we when i.e. cache 'raid' LV - this should transfer 'raidLV' flag
to _corigin LV and cache is no longer a raid.
TODO: bits for stacked devices needs more exact rules.
The dlm will often lose the lvb content, so we need to
check quite a few possibilities for lvb values that
were not being checked before.
Refactoring was required to pass the entire lvb value
back to the core code instead of the single value.
The only functional change should be detecting new
lvb states where metadata is now invalidated where
it wasn't before.
When an action is created by lvmlockd for itself,
there is no client to send the result to. Add
the NO_CLIENT flag to the action to skip sending
the result to a client.
Add a new arg to lockd_start_vg() that indicates
it is being called for a new lockd VG, so that
lvmlockd knows the lockspace being started is new.
(Will be used by a following commit.)
Commit f6473baffc introduced a new
cmd->initialized variable to keep info about which parts of the
cmd_context have been initialized.
A part of this patch was also a change in refresh_filters fn
which checks for cmd->initialized.filters variable and it does
the filter refresh *only* if the filter has already been initialized
before otherwise it's a NOOP (before, the refresh_filters also
initialized filters as a side effect in case it had not been
initialized before which was not quite correct).
However, the commit f6473baffc
did not handle the case in which configuration changes
either via --config argument or when configuration file changed
and its timestamp was higher than the timestamp of the persistent
cache file - the /etc/lvm/cache/.cache.
This patch fixes this issue and it causes the init_filters fn
in lvm_run_command fn to be called with proper value of
"load_persistent_cache" switch even if the configuration changes,
hence causing the persistent cache file to be ignored in this
case.
Ensure make clean cleans any left-over file from their previous
location so they are not in conflict with new ones.
Also hide error message when .commands file is not present.
The regex filter (controlled by devices/filter lvm.conf setting) was
evaluated as the very last filter. However, this is not optimal when
it comes to restricting disk access - users define devices/filter
as well as devices/global_filter to avoid this.
The devices/global_filter is already positioned at the beginning of the
filter chain. We need to do the same for devices/filter.
Filter chains before this patch:
A: when lvmetad is not used:
persistent_filter -> sysfs_filter -> global_regex_filter ->
type_filter -> usable->filter -> mpath_component_filter ->
partition_filter -> md_component_filter -> fw_raid_filter ->
regex_filter
B: when lvmetad is used:
B1: to update lvmetad:
sysfs_filter -> global_regex_filter -> type_filter ->
usable_filter -> mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B2: to retrieve info from lvmetad:
persistent_filter -> usable_filter -> regex_filter
From the chain list above we can see that particularly in case when
lvmetad is not used, the regex filter is the very last one that is
processed. If lvmetad is used, it doesn't matter much as there's
the global_regex_filter which is used instead when updating lvmetad
and when retrieving info from lvmetad, putting regex_filter in front
of usable_filter wouldn't change much since usabled_filter is not
reading disks directly.
This patch puts the regex filter to the front even in case lvmetad
is not used, hence reinstating the state as it was before commit
a7be3b12df (which moved the regex_filter
position in the chain). Still, the arguments for the commit
a7be3b12df still apply and they're
still satisfied since component filters (MD, mpath...) are evaluated
first just before updating lvmetad.
So with this patch, we end up with:
A: when lvmetad is not used:
persistent_filter -> sysfs_filter -> global_regex_filter ->
regex_filter -> type_filter -> usable->filter ->
mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B: when lvmetad is used:
B1: to update lvmetad:
sysfs_filter -> global_regex_filter -> type_filter ->
usable_filter -> mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B2: to retrieve info from lvmetad:
persistent_filter -> regex_filter -> usable_filter
This way, specifying the regex_filter in non-lvmetad case causes
the devices to be filtered based on regex first before processing
any other filters which can access disks (like md_component_filter).
This patch also streamlines the code for better readability.
Hopefull 4.3 will be fixed and test will be updated to let
raid test running again.
Meanwhile using md-raid may effectively kill kernel,
so leave at least other tests running.
Split up _build_histogram_arg() into separate functions to allocate
and fill the histogram arg string and remove nested local variable
declarations from the parent function.
Coverity flags a user-after-free in _stats_histograms_destroy():
>>> Calling "dm_pool_free" frees pointer "mem->chunk" which has
>>> already been freed.
This should not be possible since the histograms are destroyed in
reverse order of allocation:
203 for (n = _nr_areas_region(region) - 1; n; n--)
204 if (region->counters[n].histogram)
205 dm_pool_free(mem, region->counters[n].histogram);
It appears that Coverity is unaware that pool->chunk is updated
during the call to dm_pool_free() and valgrind flags no errors in
this function when called with multiple allocated histograms.
Since there is no actual need to free the histograms individually
in this way simplify the code and just free the first allocated
object (which will also free all later allocated histograms in a
single call).
