IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume. The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group. The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
Also, don't allow a splitmirror operation on a RAID LV that is already tracking
a split, unless the operation is to stop the tracking and complete the split.
Example:
~> lvconvert --splitmirrors 1 --trackchanges vg/lv /dev/sdc1
# Now tracking changes - image can be merged back or split-off for good
~> lvconvert --splitmirrors 1 -n new_name vg/lv /dev/sdc1
# ^ Completes split ^
If a split is performed on a RAID that is tracking an already split image and
PVs are provided, we must ensure that
1) the already split LV is represented in the PVs
2) we are careful to split only the tracked image
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
LVM metadata knows only of striped segments - not linear ones.
The activation code detects segments with a single stripe and switches
them to use the linear target.
If the new lvm.conf setting is set to 0 (e.g. in a test script), this
'optimisation' is turned off.
Simplify /api makefile and use SUBDIRS target for test dir.
Properly cleanup Makefiles with distclean in /test.
Use symbolic links for shell scripts for non-srcdir compilation.
Remove FIXMES - there should not be any pool free call since
the memory pool is from device manager, and pool is detroyed
after the operation, so doing extra free here would not help here.
However lv_has_target_type() is using cmd mempool so here the extra
call for dm_pool_free makes sence.
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.
Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
For write we do not need to hold memory locked.
This relaxes many conditions and avoid problems when allocating
a lot of memory for writting metadata buffers.
(In case of huge MDA size this would lead to mismatch between
locked and unlocked memory region size).
Add also internal check we are not writing in critical section.
Removal of an inactive origin removes also all related snapshots.
When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.
lvremove -f will skip the prompt.
Update region_size only for mirror and raid targets.
This fixes warning messages when vg is using small
extent size like 1KiB and no mirror/raid is created,
but the user still got the message:
$> vgcreate -s 1K vg <pvs>
$> lvcreate -L10K vg
Using reduced mirror region size of 4 sectors
When a PV label write is deferred to a vg_write call (as introduced by a patch
in 2.02.86), the PV is flagged with the internal UNLABELLED_PV flag. However,
when calling vg_archive before vg_write, we still have the PV labelled with the
UNLABELLED_PV flag which was not recognised as a proper flag while exporting
VG metadata:
# vgcreate vg /dev/sda
No physical volume label read from /dev/sda
Metadata inconsistency: Not all flags successfully exported.
Metadata inconsistency: Not all flags successfully exported.
Writing physical volume data to disk "/dev/sda"
Physical volume "/dev/sda" successfully created
Volume group "vg" successfully created
udev may also need to be disabled if you didn't build it statically too.
dmeventd.static could be fixed with some more work but I don't really see the
point: without dlopen() it's useless, and if you have dlopen(), why not support
normal shared libraries too?
Add filter which tries to check if scanned device is part
of active multipath.
Firstly, only SCSI major number devices are handled in filter.
Then it checks if device has exactly one holder (in sysfs) and
if it is device-mapper device and DM-UUID is prefixed by "MPATH-".
If so, this device is filtered out.
The whole filter can be switched off by setting
mpath_component_detection in lvm.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=597010
Signed-off-by: Milan Broz <mbroz@redhat.com>
Before adding a new virtual segment to LV, check first whether
the last segment isn't already of the same type. In this case
extend last segment instead of creating the new one.
Thin volumes should have always only 1 virtual segment, but it
helps also to virtual snapshot or error segtype..
Git commit ID 0864378250 was meant to disallow
'mirrored' logs for cluster mirrors. However, when add_mirror_log is used
to create the log (as is now the case when using 'lvcreate' or converting only
the log) the check is bypassed.
This patch adds the check to add_mirror_log.
pvck prints 'extra' character from the label since there is no '\0'
after the struct label entry and just uint64_t follows directly.
So avoid it by limiting 8 chars to be printed.
https://www.redhat.com/archives/lvm-devel/2011-January/msg00109.html
Signed-off-by: Paul Bolle <pebolle tiscali nl>
This function could be useful for other _manip source files.
Use dm_list manipulation function for provided functionality,
which make the code more readable and avoid touching list
internal details here.
This was the intended behaviour, as described in the lvchange man page, so you
have complete control through volume_list in lvm.conf, but the code seems to
have been treating -ae as local-only for a very long time.
Split syntax for thin-pool since it cannot be fully matched with snapshot.
So to avoid more confusion - take thin support into separate line.
Though still significant updates are needed for thin provisioning.
Version 2 of the userspace log protocol accepts return information during the
DM_ULOG_CTR exchange. The return information contains the name of the log
device that is being used (if there is one). The kernel can then register the
device via 'dm_get_device'. Amoung other things, this allows for userspace to
assemble a correct dependency tree of devices - critical for LVM handling of
suspend/resume calls.
Also, update dm-log-userspace.h to match the kernel header associated with
this protocol change. (Includes a version inc.)
When verify_udev_operations was disable, code for stacking fs operation for
lvm links was completely disable - but this code was also used for collecting
information, that a new node is being created.
Add a new flag which is set when a creation of lv symlinks is requested which
should restore old behaviour of lv_info function, that has called fs_sync()
before quere for open count on device.
Barrier is supposed to be used in situation like this
and replace tricky mutex usage, where mutex has been unlocked
by a different thread than the locking thread.
Properly detect if the filters were refreshed properly.
(May needs few more fixes ??)
Filter refresh may fail because it may be out of free file descriptors
when clvmd gets overloaded.
Replace usleep with pthread condition to increase speed testing
(for simplicity just 1 condition for all locks).
Use thread mutex also for unlock resource (so it wakes up awaiting
threads)
Better check some error states and return error in fail case with
unlocked mutex.
