IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Replace lowercase @sbindir@ with @SBINDIR@ which contains
fully decoded path.
Same with @usrsbindir@ which is also used with clvmd and cmirrord.
Also handle SYSCONFDIR for EnvironmentFile.
Patch fixes generated unit files with strings like:
ExecStart=${exec_prefix}/sbin/lvm
split resize_crypt function in two.
a) Detect proper dm-crypt device type and count new --size
value for cryptsetup resize command.
b) Perform the resize
Add these for dmeventd systemd unit (dm-event.service):
Before: shutdown.target
Conflicts: shutdown.target
This will cause the dmeventd to be properly stopped at shutdown (after
all the dmeventd clients unregistered their devices from monitoring)
with dm-event.service's stop action (there's no direct action defined
for the "stop" so systemd sends SIGTERM instead).
Before, we let dmeventd to get killed only as part of the very last
SIGTERM/SIGKILL for all the remaining processes late in the shutdown
sequence so we may have missed some logs if dmeventd encountered an
error during its shutdown (logging facilities are already off at this
late time in shutdown sequence).
Ref: https://www.redhat.com/archives/lvm-devel/2017-October/msg00000.html
There's nothing special about /boot other than it's used during boot.
But when blkdeactivate is called either on all devices or including a
device where the /boot is on top, we should also include this mount
point when doing unmount before deactivation of supported devices.
The new blkdeactivate -r|mdraidoption wait causes blkdeactivate to wait
for any resync/recovery/reshape that is currently in progress before
deactivating the device.
If this option is used, blkdeactivate calls mdadm -W|--wait before
mdadm -S|--stop.
Revert dc50f2f4a0.
We're canonicalizing/escaping the names here and we're reusing the
variable name so the code doesn't need to use extra variables and
further assignments that may confuse us. Let's keep the code simple.
The
local name=(...$name)
is not the same as
local name
name=(...$name)
(I know various code-checking tools fuss about this and recommend
the 2nd way, but let's ignore those tools' nitpicking here please.)
There was a typo in blkdeactivate --dmoption/--lvmoption/mpathoption,
it had missing "s" at the end and it was not recognized properly, only
short names for the options (-d/-l/-m).
Drop 'DMEVENT' make variable and use BUILD_DMEVENTD like with other daemons.
NOTE: by default we do not build dmeventd - maybe time to change
as lot of build targets basically do need dmeventd...
Switch to use SYSTEMD_LIBS and avoid linking systemd library with
every linked tool when dbus notification are enabled.
(TODO add missing testing for lib presence)
Commit 1fe4f80e45 in current version
introduced regression for a terminal user, as he could not enter 'n'
as answer. Add missing break for this case (No whats_new).
When 'fsadm' was running without terminal (i.e. pipe), it's been
automatically working like in '--yes'.
Detect terminal and only accept empty "" input in this mode.
Add more validation to catch mainly renamed devices, where
filesystem utils are not able to handle devices properly,
as they are not addressed by major:minor by rather via some
symbolic path names which can change over time via rename operation.
Since we add more validation to 'detect_mounted' function make sure
we always use it even with 'resize' action, so numerous validations
are not skipped.
We have to unset the LoadState variable from previous use when we check
for systemd unit state. We use this variable to check if systemd services
are loaded or not and if it is loaded, we issue systemctl commands to
enable/disable and start/stop the service. We don't issue these commands
if the unit is not loaded to avoid error messages which may confuse users.
The blkdeactivate script processes MD devices too so we should unmount
any mount point on top of an MD device if blkdeactivate -u|--umount is
called.
Diagnosed and reported by: Rick Warner <rick@microway.com>
See also https://bugzilla.redhat.com/show_bug.cgi?id=1410585.
If blkdeactivate finds out that the device on top of device stack
is already unmounted, it still proceeds with device stack deactivation
underneath now.
This situation can happen if blkdeactivate is started and the mount
point is unmounted in parallel by chance (so when blkdeactivate
gets the the actual umount call, the device is not mounted anymore).
Before, the blkdeactivate added such device to skip list which caused
all the stack underneath to be skipped too on deactivation. Now, we
proceed just as if blkdeactivate did the umount itself.
For example, in the example below, the vg-lvol0 is mounted on /mnt/test
when blkdeactivate is called, but it gets unmounted in parallel later
on when blkdeactivate gets to the actual umount call.
Before this patch (vg-lvol0 underneath not deactivated):
$ blkdeactivate -u
Deactivating block devices:
[UMOUNT]: unmounting vg-lvol0 (dm-2) mounted on /mnt/test... skipping
With this patch applied (vg-lvol0 underneath still deactivated):
$ blkdeactivate -u
Deactivating block devices:
[UMOUNT]: unmounting vg-lvol0 (dm-2) mounted on /mnt/test... already unmounted
[LVM]: deactivating Logical Volume vg/lvol0... done
We shouldn't be losing pvscans just because of the fact that the
underlying device (PV) appears and disappears quickly in the system,
otherwise lvmetad may not see the device if it appears again (or it may
still keep the device in cache even it's already gone).
The lsblk is just a nice helper here - it's not crucial for lvmdump so
do best effort here and use the most we can from current version of
lsblk that is installed on system. The lsblk -s option was added a bit
later after lsblk introduction and lsblk -O support even more later -
so if these are not available, use only pure lsblk output without any
extras.
Including major and minor numbers in pvs and lvs output when calling
lvmdump -a makes it a bit easier to match these items with possible
system log/journal.
blkdeactivate -m disablequeueing causes "multipathd disablequeueing maps"
call inside blkdeactivate script before deactivating devices. This
avoids a situation where blkdeactivate may wait for paths to appear if
multipath is set to queueing and there's a stack of other devices and/or
mount points on top of such multipath device.
See also https://bugzilla.redhat.com/show_bug.cgi?id=1344381.
Commit #5b3a4a9 caused the "name" variable to be cleared if
declaration and assignment is on two lines so put it back
so it's on one line for it to work again.
Don't use lvm_init() to create a full command context, which
does a lot of command setup (like connecting to daemons), which
is unnecessary for simply reading a value from lvm.conf.
Passing a NULL context arg to the lvm_config_ function is now
allowed, in which case lvm.conf is read without doing lvm
command setup.
With commit 2d5dc6512e the dbus server
no longer needs to utilize udev to know when to update its internal
state.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
If we're using non-standard /dev layout so we can't get the dm-X name
easily, we can't also look at the /sys/blocl/dm-X/dev to get the major:minor
pair. Use "stat" in this case even though it triggers automounts
(but there's no better way for now).
The /proc/self/mountinfo is not bound to device names like /proc/mounts
and it uses major:minor pairs instead.
This fixes a situation in which a volume is mounted and then renamed
later on - that makes /proc/mounts unreliable when detecting mounted
volumes.
See also https://bugzilla.redhat.com/show_bug.cgi?id=1196910.
Correct name is lvm2-lvmdbusd.service not lvmdbusd.service.
This makes the bus-activation (auto-activation) work.
Signed-off-by: Vratislav Podzimek <vpodzime@redhat.com>
The lvm2-activation{-early,-net}.service systemd unit statuses were missing
in dump gathered by lvmdump -s. These are quite important when debugging
scenarios with systemd environment and where lvmetad is not used.
Make sure log/prefix is set to "" when getting the list of VG names.
We need this for the format to be correct so it's properly searched
through later on.
$ vgcreate vgA /dev/sda
Volume group "vgA" successfully created
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ dd if=/dev/sda of=/dev/sdc bs=1M
(the new VG name is prefix of existing VG name)
$ vgimportclone -n vg /dev/sdb
(the new VG name is suffix of existing VG name)
$ vgimportclone -n gA /dev/sdc
Before this patch:
------------------
(we end up with "vg1" and "gA1" names with the "1" suffix which is not needed)
$ vgs -o vg_name
VG
gA1
vg1
vgA
With this patch applied:
------------------------
(we end up with "vg" and "gA" names as they're unique already and no extra suffix is added)
$ # vgs -o vg_name
VG
gA
vg
vgA
Of course, if the name supplied is not unique, the number is added correctly:
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ vgimportclone -n vgA /dev/sdb
$ vgs -o vg_name
VG
vgA
vgA1
We can replace the expressions with awk/grep/cut/tr with --select now and
more suitable reporting options and modes. Also, we don't need to check
the temporary lvm.conf generated within vgimportclone script since we're
generating it ourselves now using lvmconfig, not using sed anymore like
it was before (so we can be pretty sure it's correct - we use lvmconfig
now even for generating the lvm.conf itself).
We want most of our units to be started before any local/remote mount
points are mounted - we used {local,remote}-fs.target for this purpose
before, but it was not 100% correct as there's even {local,remote}-fs-pre.target
special systemd unit reserved for this exact purpose.
See also man 7 systemd.special and "local-fs-pre.target"/"remote-fs-pre.target"
description.
Commit 00b36ef06a had a typo
and missed '{' for shell variable, thus command used slightly
different 'tmp' dir name for cache dir (with extra '}').
Such change was unnoticed until a recent fix in persistent
filter, lvm2 missed to update cache file when --config
was specified.
The result was, /tmp dir was accumulating snap.XXXXX} dirs when
running vgimportclose script.
If running lvmconf ... --startstopservice --mirrorservice in systemd
environment, handle lvm2-cmirrord accordingly. A typo in the script
caused the lvm2-cmirrord to not start/stop immediately, it was
only enabled/disabled (so the --startstopservice was ignored in this
case).
If lvmetad is not used, we generate lvm2-activation{-early,-net}.service
systemd services to activate any VGs found on the system. So far we used
--sysinit during this activation as polling was still forked off of the
lvm activation command.
This has changed with lvmpolld - we have proper lvmpolld systemd
service now (activated via its socket unit). As such, we don't need
to use --sysinit anymore during activation in systemd environment
as polling was the only barrier to remove the need for --sysinit.
'lvm dumpconfig' now does a lot more than just dumping configuration
information and is no longer only a support tool. Users now need
to run it to find out about configuration information that has been
removed from the lvm.conf man page so we need to promote this to full
command line status as 'lvmconfig'. Also accept 'lvm config' and mention
it in the usage information of lvmconf (which should also get merged in
eventually).
This removes dependency on lvm binary - if it's not present, all LVM
processing is skipped (shouldn't normally happen because if lvm binary
is missing then there's obviously nothing that would activate it, but
let's make sure).
Without this tight dependency on lvm, the blkdeactivate script can
be packaged with libdevmapper/dmsetup (in contrast to lvm as it was
before) and as such the script can still be used to handle other DM
devices.
This patch adds new options to lvmconf:
--enable-halvm (just like --enable-cluster, but configure LVM
for use in HA LVM - meaning disabling lvmetad and
making sure we have locking_type=1)
--disable-halvm (just like --disable-cluster, but configure LVM
back from HA LVM - meaning enabling lvmetad if
it's enabled by default and making sure we have
default locking type set)
--services (causes clvmd and lvmetad services to be enabled or
disabled appropriately and conforming to the changes
in lvm configuration we've just made with lvmconf)
--mirrorservice (in addition to clvmd and lvmetad services, also
enable or disable cmirrord service appropriately;
this is a separate option because cmirrord is
optional and it doesn't need to be always enabled
when clvmd is enabled)
--startstopservices (in addition to enabling or disabling services,
start and stop these services immediately)
These options are supposed to help users to make their system ready
for cluster with clvmd (active-active) or HA LVM (active-passive) use
while lvmconf script can handle services as well so users don't need
to bother about setting them manually.
Also, before this patch, we hardcoded global/use_lvmetad=0 as default
value in lvmconf script. Howeverm this default may change by just
flipping the value in config_settings.h and we may forget to edit
the lvmconf. It's better to use lvm dumpconfig --type default global/use_lvmetad
to get the actual default value and use this one instead of hardcoded one.
When lvm2-pvscan@.service and lvm2-lvmetad.service are scheduled to be
stopped lvm2-pvscan@.service should be stopped first since pvscan uses
lvmetad.
This is especially important if lvm2-lvmetad.socket is also scheduled to
be stopped as in this case connection requests are suppressed causing
pvscan to fail.
The iscsi-shutdown.service is the one responsible for logging out
iscsi sessions so blk-availability.service (running the blkdeactivate
script) should be run before that on shutdown (so we need to use
After=iscsi-shutdown.service because "After" relates to starting
the service and the opposite order is automatically applied on
stopping the service at shutdown).
Two new functions added in the init script: rh_status and rh_status_q.
First one to be used in status() and second one to be used in start(),
stop(), force_stop(). Check for 'dmeventd' added and print list of
lvs being monitored in status().
The arg check using pvs is unnecessary. If the arg is not a PV,
the command will just fail later. Using the pvs command at this
point in the command is a problem when lvmetad is running, because
the pvs command does not report duplicate PVs when using lvmetad.
(Alternatively, use_lvmetad could be disabled by adding a --config
override to this pvs command.)
No need to use awk now to get appropriate VGs/LVs, use LVM's
own --select - it's quicker, it removes a need for external
dependency on awk and it's also more readable.
All the LVM commands are run in mode without lvmetad use (since lvmetad
can't handle duplicates). When we're finished with vgimportclone, we
need to notify lvmetad about changes.
Before this patch (/dev/sda and /dev/sdb contains a copy VG called "vg"):
$ vgimportclone --basevgname vg_snap /dev/sdb
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: Activation disabled. No device-mapper interaction will be attempted.
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Physical volume "/tmp/snap.zcJ8LCmj/vgimport0" changed 1 physical volume changed / 0 physical volumes not changed
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: Activation disabled. No device-mapper interaction will be attempted.
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Volume group "vg" successfully changed
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Volume group "vg" successfully renamed to "vg_snap"
Reading all physical volumes. This may take a while...
Found volume group "vg" using metadata type lvm2
Found volume group "fedora" using metadata type lvm2
$ vgs
VG #PV #LV #SN Attr VSize VFree
fedora 1 2 0 wz--n- 9.50g 0
vg 1 1 0 wz--n- 124.00m 120.00m
(...lvmetad doesn't see the new "vg_snap"!)
With this patch applied:
$ vgimportclone --basevgname vg_snap /dev/sdb
...
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Volume group "vg" successfully renamed to "vg_snap"
Notifying lvmetad about changes since it was disabled temporarily.
Reading all physical volumes. This may take a while...
Found volume group "vg_snap" using metadata type lvm2
Found volume group "fedora" using metadata type lvm2
Found volume group "vg" using metadata type lvm2
$ vgs
VG #PV #LV #SN Attr VSize VFree
fedora 1 2 0 wz--n- 9.50g 0
vg 1 1 0 wz--n- 124.00m 120.00m
vg_snap 1 1 0 wz--n- 124.00m 120.00m
The "restart lvmetad before enabling it" message is a bit misleading
here - we should probably suppress this one, but we can't suppress
warning messages selectively at the moment and we don't want to lose
other warning/error messages printed...
With current dumpconfig, we can generate lvm.conf easily - we can merge
current lvm.conf with the config given on cmd line:
lvm dumpconfig --mergedconfig --config "..."
This is a bit simpler than using awk and it also avoids problems when some of
the configuration is missing in existing lvm.conf file and hardcoded defaults
are used instead. The dumpconfig handles this transparently.
Bug https://bugzilla.redhat.com/show_bug.cgi?id=843587 is handled better
now - the hang does not occur anymore. There are still error messages
issued though during shutdown if someone stops lvm2-lvmetad.service
manually that lvm2-monitor.service depends on (even during shutdown).
These errors are correct though and will point to incorrect
configuration (still having use_lvmetad=1 in lvm.conf and stopping
lvm2-lvmetad.service manually).
The workaround to prevent the hang is not needed now. So the
'--config "global{use_lvmetad=0}"' is now removed from the
lvm2-monitor.service's ExecStop line.
The sysinit.target is ordered even before sockets.target and there
may be situations in which the lvmetad is needed early, for example
in rescue.target to activate some LVs on which mountpoints reside.
Also, like in the case of rescue.target, the sockets.target is not
pulled in (unless some other service pulls it in explicitly).
See also: https://bugzilla.redhat.com/show_bug.cgi?id=1087586#c26
for the summary of the problem.
This is sort of info we always ask people to retrieve when
inspecting problems in systemd environment so let's have this
as part of lvmdump directly.
The -s option does not need to be bound to systemd only. We could
add support for initscripts or any other system-wide/service tracking
info that can help us with debugging problems.
For a quick overview of config when debugging and to quickly check
which values are different from defaults and which are not defined
in the config and for which defaults are used.
When clustered VG is available in the system but we don't have
clustering set up for whatever reason, the lvm2-monitor scripts should
not fail completely just because these clustered VGs are skipped during
vgs/vgchange calls in lvm2-monitor initscript/systemd unit.
Do not use default dependencies that systemd adds to the units
so we have better control of when the service is started/stopped
and we don't end up with unexpected behaviour.
When the activation units are generated if use_lvmetad=0 (no
autoactivation), use --ignoreskippedcluster option for vgchange calls
since the cluster with cLVM is set up by separate units.
This avoids a situation in which the generated activation units are
improperly in failed state just because of the vgchange return value
when clustered VGs are encountered while the activation of non-clustered
VGs does proceed normally.
lvm2_cluster_activation_red_hat.service.in -> lvm2_cluster_activation_systemd_red_hat.service.in
lvm2_clvmd_red_hat.service.in -> lvm2_clvmd_red_hat.service.in
Edit lvm2-cluster-activation reference on cmirror - take new
lvm2-cmirrord.service, it was just cmirrord(.service) before
as the old initscript was used in compatibility mode.
Also, use WantedBy=multi-user.target instead of sysinit.target
in lvm2-cluster-activation.service.
