IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
with fork and exec to avoid use of shell.
largely copied from lib/misc/lvm-exec.c
require lvmlockctl_kill_command to be full path
use lvm config instead of lvmconfig to avoid need for LVM_DIR
The LVM devices file lists devices that lvm can use. The default
file is /etc/lvm/devices/system.devices, and the lvmdevices(8)
command is used to add or remove device entries. If the file
does not exist, or if lvm.conf includes use_devicesfile=0, then
lvm will not use a devices file. When the devices file is in use,
the regex filter is not used, and the filter settings in lvm.conf
or on the command line are ignored.
LVM records devices in the devices file using hardware-specific
IDs, such as the WWID, and attempts to use subsystem-specific
IDs for virtual device types. These device IDs are also written
in the VG metadata. When no hardware or virtual ID is available,
lvm falls back using the unstable device name as the device ID.
When devnames are used, lvm performs extra scanning to find
devices if their devname changes, e.g. after reboot.
When proper device IDs are used, an lvm command will not look
at devices outside the devices file, but when devnames are used
as a fallback, lvm will scan devices outside the devices file
to locate PVs on renamed devices. A config setting
search_for_devnames can be used to control the scanning for
renamed devname entries.
Related to the devices file, the new command option
--devices <devnames> allows a list of devices to be specified for
the command to use, overriding the devices file. The listed
devices act as a sort of devices file in terms of limiting which
devices lvm will see and use. Devices that are not listed will
appear to be missing to the lvm command.
Multiple devices files can be kept in /etc/lvm/devices, which
allows lvm to be used with different sets of devices, e.g.
system devices do not need to be exposed to a specific application,
and the application can use lvm on its own set of devices that are
not exposed to the system. The option --devicesfile <filename> is
used to select the devices file to use with the command. Without
the option set, the default system devices file is used.
Setting --devicesfile "" causes lvm to not use a devices file.
An existing, empty devices file means lvm will see no devices.
The new command vgimportdevices adds PVs from a VG to the devices
file and updates the VG metadata to include the device IDs.
vgimportdevices -a will import all VGs into the system devices file.
LVM commands run by dmeventd not use a devices file by default,
and will look at all devices on the system. A devices file can
be created for dmeventd (/etc/lvm/devices/dmeventd.devices) If
this file exists, lvm commands run by dmeventd will use it.
Internal implementaion:
- device_ids_read - read the devices file
. add struct dev_use (du) to cmd->use_devices for each devices file entry
- dev_cache_scan - get /dev entries
. add struct device (dev) to dev_cache for each device on the system
- device_ids_match - match devices file entries to /dev entries
. match each du on cmd->use_devices to a dev in dev_cache, using device ID
. on match, set du->dev, dev->id, dev->flags MATCHED_USE_ID
- label_scan - read lvm headers and metadata from devices
. filters are applied, those that do not need data from the device
. filter-deviceid skips devs without MATCHED_USE_ID, i.e.
skips /dev entries that are not listed in the devices file
. read lvm label from dev
. filters are applied, those that use data from the device
. read lvm metadata from dev
. add info/vginfo structs for PVs/VGs (info is "lvmcache")
- device_ids_find_renamed_devs - handle devices with unstable devname ID
where devname changed
. this step only needed when devs do not have proper device IDs,
and their dev names change, e.g. after reboot sdb becomes sdc.
. detect incorrect match because PVID in the devices file entry
does not match the PVID found when the device was read above
. undo incorrect match between du and dev above
. search system devices for new location of PVID
. update devices file with new devnames for PVIDs on renamed devices
. label_scan the renamed devs
- continue with command processing
cmd context has 'threaded' value that used be set
by clvmd - and allowed proper memory locking management.
Reuse same bit for dmeventd.
Since dmeventd is using 300KiB stack per thread,
we will ignore any user settings for allocation/reserved_stack
until some better solution is find.
This avoids crashing of dmevend when user changes this value
and because in most cases lvm2 should work ok with 64K stack
size, this change should not cause any problems.
Switch remaining zero sized struct to flexible arrays to be C99
complient.
These simple rules should apply:
- The incomplete array type must be the last element within the structure.
- There cannot be an array of structures that contain a flexible array member.
- Structures that contain a flexible array member cannot be used as a member of another structure.
- The structure must contain at least one named member in addition to the flexible array member.
Although some of the code pieces should be still improved.
The lock adopt feature was disabled since it had used
lvmetad as a source of info. This replaces the lvmetad
info with a local file and enables the adopt feature again
(enabled with lvmlockd --adopt 1).
dmeventd is 'scanning' statuses in loop (most usually in 10sec
intervals) - and meanwhile it sleeps within:
pthread_cond_timedwait()
However this function call tends to wakeup sometimes a short amount of
time sooner - and our code still believe the 'right time' has not yet
arrived and basically for a moment 'busy-looped' on calling this
function - so for systems with 'clock_gettime()' present we obtain
time and we go 10ms to the future second - this avoids unneeded
repeated invocation of our time scheduling loop.
TODO: monitoring during 1 hour 'time-change'...
When _daemon_read()/_client_read() fails during the read,
ensure memory allocated withing function is also release here
(so caller does not need to care). Also improve code readbility a bit
a for same functionality use more similar code.
Since we fixed linking of proper version of 'libdevmapper' with
linking lvm2 plugin correctly - we already have correct function
available linked with internal lvm library.
So drop unneeded include of parsing function.
When a LV loses an interface it ends up getting removed and recreated.
This happens after the VGs have been processed and updated. Thus when
this happens we need to re-check the VGs.
VDO pool LVs are represented by a new dbus interface VgVdo. Currently
the interface only has additional VDO properties, but when the
ability to support additional LV creation is added we can add a method
to the interface.
This reverts commit ad560a286a.
The reverted patch also removed the warning which we realized we need
to keep as valuable process information (see related bugzilla below).
In a followup patch, we'll keep the message and avoid bailing out thus
always allowing lvconvert to try repairing if 'allocate' fault policy set.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1751887
With Python 3.8 converting these directly to string using str()
no longer works, we need to convert these to integer first.
On Python 3.8:
>>> str(dbus.Int64(1))
'dbus.Int64(1)'
On Python 3.7 (and older):
>>> str(dbus.UInt64(1))
'1'
This is probably related to removing __str__ function from method
from int (dbus.UInt is subclass of int) which happened in 3.8, see
https://docs.python.org/3.8/whatsnew/3.8.html
Signed-off-by: Vojtech Trefny <vtrefny@redhat.com>
