IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before, the pvscan --cache -aay was called on each ADD and CHANGE
uevent (for a device that is not a device-mapper device) and each CHANGE
event (for a PV that is a device-mapper device).
This causes troubles with autoactivation in some cases as CHANGE event
may originate from using the OPTION+="watch" udev rule that is defined
in 60-persistent-storage.rules (part of the rules provided by udev
directly) and it's used for all block devices
(except fd*|mtd*|nbd*|gnbd*|btibm*|dm-*|md* devices). For example, the
following sequence incorrectly activates the rest of LVs in a VG if one
of the LVs in the VG is being removed:
[root@rhel6-a ~]# pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
[root@rhel6-a ~]# vgcreate vg /dev/sda
Volume group "vg" successfully created
[root@rhel6-a ~]# lvcreate -l1 vg
Logical volume "lvol0" created
[root@rhel6-a ~]# lvcreate -l1 vg
Logical volume "lvol1" created
[root@rhel6-a ~]# vgchange -an vg
0 logical volume(s) in volume group "vg" now active
[root@rhel6-a ~]# lvs
LV VG Attr LSize Pool Origin Data% Move Log
Cpy%Sync Convert
lvol0 vg -wi------ 4.00m
lvol1 vg -wi------ 4.00m
[root@rhel6-a ~]# lvremove -ff vg/lvol1
Logical volume "lvol1" successfully removed
[root@rhel6-a ~]# lvs
LV VG Attr LSize Pool Origin Data% Move Log
Cpy%Sync Convert
lvol0 vg -wi-a---- 4.00m
...so the vg was deactivated, then lvol1 removed, and we end up with
lvol1 removed (which is ok) BUT with lvol0 activated (which is wrong)!!!
This is because after lvol1 removal, we need to write metadata to the
underlying device /dev/sda and that causes the CHANGE event to be
generated (because of the WATCH udev rule set on this device) and this
causes the pvscan --cache -aay to be reevaluated.
We have to limit this and call pvscan --cache -aay to autoactivate
VGs/LVs only in these cases:
--> if the *PV is not a dm device*, scan only after proper device
addition (ADD event) and not with any other changes (CHANGE event)
--> if the *PV is a dm device*, scan only after proper mapping
activation (CHANGE event + the underlying PV in a state "just
activated")
Define auto_activation_handler that activates VGs/LVs automatically
based on the activation/auto_activation_volume_list (activating all
volumes by default if the list is not defined).
The autoactivation is done within the pvscan call in 69-dm-lvmetad.rules
that watches for udev events (device appearance/removal).
For now, this works for non-clustered and complete VGs only.
Remove executable path detection in udev rules and use sbindir that
is configured, but still provide the original functionality by means
of 'configure --enable-udev-rule-exec-detection'.
Normally, the exec path for the tools called in udev rules should
not differ from the sbindir used, however, there are cases this is
necessary. For example different environments could be assembled
in a way that these path differ for some reason (distribution installer,
initrd ...).
This functionality is kept for compatibility only. Any environment
moving the binaries around and using different paths should be fixed
eventually!
We can't use 'DM_SBIN_PATH'. This one is set only for DM devices but not
for all block devices - the pvscan is run on all relevant block devices!
This LVM_SBIN_PATH (as well as DM_SBIN_PATH) detection should be removed
eventually but for upstream solution, we still have to do that as there are
known cases where the binaries are put either in /sbin or /usr/sbin
(some installation systems, initrd systems etc.).
Why using the order 69:
- Storage processing in general happens in 60-persistent-storage.rules,
including the blkid call that adds some usable information we can use
for filtering and speedup (these rules are part of upstream udev and
the order is preserved on most distros)
- There's still some other storage-related processing done after
60-persistent-storage.rules in general. These might add some detailed
storage-related information we might use to filter devices effectively
(e.g. MD udev rules, ...).
- We need lvmetad rules to be processed before any consumers can use the
output - so the metadata cache is ready soon enough (e.g. udisks rules).
- There's no official (upstream udev) document about assigning the order,
so this number is chosen in best belief it will suit all scenarios.
We don't have anything better yet...
The problems the watch rule caused when removing devices should be covered
now with the "retry remove" logic. It's also better to have this maintained
by us, rather than having this rule anywhere else without proper control.
Skip decoding of DM flags when device is removed.
We currently need DM flags only for add|change events. So forking
dmsetup process for removed devices is a waste of CPU time.
Udev is already quite slow, so make it just a tiny bit faster.
This is to avoid any scanning and processing of DM devices while they are in
suspended state (e.g. a rename while the device is suspended - a CHANGE event
is generated!). Otherwise, any scanning in the rules could end up with locking
the calling process until the device is resumed and so we don't receive a
notification about udev rules completion until then (and that effectively
locks out the process awaiting the notification!).
However, we still keep 'disk' and any 'subsystem' related udev rules running.
We trust these and these should check themselves whether a device is suspended
or not, not trying to run any scanning if it is.
This can happen with older rules (without support for synthesized events)
that are still part of initrd while using new udev rules in the system itself.
The consequence was that new udev rules incorrectly assumed that not having
DM_UDEV_PRIMARY_SOURCE_FLAG set always means the uevent is synthesized and
inappropriate (device is still not properly activated) and so it should be
ignored. However, initrd is not updated automatically while updating the
libdevmapper/udev rules in the system and so we end up with the rules not
detecting and setting crucial parts in the initrd environment and the rules
in the system that rely on the information that should have been stored in
udev db (which is incorrect in this configuration, of course).
The overall consequence is that the update of libdevmapper/lvm2 without
regenerating the initrd could end up with a boot failure! Ignoring the event
means removing any existing symlinks in /dev!
To fix this, increase udev rules version to make a difference. So from now on,
mark rules without proper support for synthesized events as
DM_UDEV_RULES_VSN="1" and 2 (or higher) if that support is included.
We still need to detect this one! We're not so strict with CHANGE events as
with the ADD events while applying filters in the rules so this one would
pass and it would process the rules prematurely (because it appears *before*
the actual CHANGE event used when resuming a DM device while setting read-only
state at the same time).
For now, this is just a precaution. Normally, all the other (non-dm) rules
should check DM_UDEV_DISABLE_OTHER_RULES_FLAG and therefore avoid setting
any inotify watches as well. But let's make sure.
Support for final assignment of the "nowatch" rule (the use of ":=") will
appear in next udev release, v160. This should also work in previous udev
versions but the setting won't be sealed so any further OPTIONS="watch" will
always prevail there.
We may want to add more specific "nowatch" rules later if needed.
We can use DM_UDEV_PRIMARY_SOURCE_FLAG to identify the spurious events
and use it as an indication that the device has already been activated before
(and hence we can find this property in udev database).
WARNING: This change requires udev startup script to preserve udev database
from initrd. All the information stored there during activation of devices
is important for the initial "udevadm trigger --action=add" call that is
used in udev startup script. If not done this way, udev startup script needs
to define DM_UDEV_PRIMARY_SOURCE_FLAG=1 property for any ADD events it uses.
This rule appeared in udev v152 and it helps us to support spurious events
where we didn't have any flags set (events originated in udevadm trigger
or the watch rule). These flags are important to direct the rule application.
Now, with the help of this rule, we can regenerate old udev db content.
To implement this correctly, we need to flag all proper DM udev events with
DM_UDEV_PRIMARY_SOURCE_FLAG. That happens automatically for all ioctls
generating events originated in libdevmapper.
Fix unwanted modification of $(top_builddir)/make.tmpl.
Using dependency rules to install rules for udev.
There is minor problem, with concurent usage of builddir
and srcdir could lead to missuse of 10-dm.rules which
could be found in VPATH from different builddir.
However current solution uses intermediate target so
the generated 10-dm.rules exists only for short period of time
during make install execution.
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
There's a tiny period of time when the _mimage device is visible during
downconversion from mirror to linear. Since it is visible, we need to
create the symlinks, otherwise warning messages will be issued about udev
not creating those symlinks. We have to rely on udev flags completely.
There's a new change udev event generated since kernel 2.6.32 that
notifies userspace about a change in read-only attribute for block
devices (with DISK_RO=1 environment variable set).
We need to detect this and disable the rule application so the
meaning of this change event is not interchanged with the regular
change event used while resuming/renaming DM devices.
If there's anybody awaiting this notification in foreign rules,
he can still check for this env var and do the appropriate actions
separately.
'last_rule' option has been removed from udev (version >= 147).
From now on, we require foreign rules to check and honor
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG} instead. Foreign
rules should be skipped totally when this flag is set.
- add copyright notice for 10-dm.rules.in,
- set DM_UDEV_DISABLE_{DISK, OTHER}_RULES_FLAG in 11-dm-lvm.rules directly
for inappropriate and non-top-level subdevices in case we use older kernels
where DM_COOKIE is not used (and therefore there are no flags passed from
the LVM process itself). This applies for older kernels (version < 2.6.31),
- remove unnecessary filters in 95-dm-notify.rules - the DM_COOKIE env var
itself is set for change/remove udev events and for DM devices only so
there's no need to double-check this.
- we have these levels when the udev rules are processed:
10-dm.rules --> [11-dm-<subsystem>.rules] --> [12-dm-permissions.rules] -->
13-dm-disk.rules --> [...all the other foreign rules...] --> 95-dm-notify.rules
- each level can be disabled now by
DM_UDEV_DISABLE_{DM, SUBSYSTEM, DISK, OTHER}_RULES_FLAG
- add DM_UDEV_DISABLE_DM_RULES_FLAG to disable 10-dm.rules
- add DM_UDEV_DISABLE_OTHER_RULES_FLAG to disable all the other (non-dm) rules.
We cutoff these rules by using the 'last_rule', so this one should really be
used with great care and in well-founded situations. We use this for lvm's
hidden and layer devices now.
- add a parameter for add_dev_node, rm_dev_node and rename_dev_node so it's
possible to switch on/off udev checks
- use DM_UDEV_DISABLE_DM_RULES_FLAG and DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG
if there's no cookie set and we have resume, remove and rename ioctl.
This could happen when someone uses the libdevmapper that is compiled with
udev_sync but the software does not make use of it. This way we can switch
off the rules and fallback to libdevmapper node creation so there's no
udev/libdevmapper race.
- remove default permissions set in 95-dm-notify.rules (and add a hint in 12-dm-permissions.rules to set it by the user directly)
- add multipath DM_ACTION=="PATH_FAILED" filter
- remove unnecessary filters in the headers of the rules (we can simply use DM_UDEV_RULES_VSN instead)
- fix symlink priorities in /dev/disk/ (snapshot volumes have low priority for FS UUID symlinks so it will not overwrite symlinks for the origin)
- add DM_UDEV_RULES_VSN to provide a variable to be checked for in the other
rules (e.g. to check that DM rules are actually installed, we can alternate
functionality in the other rules based on this information, also we have
versioning support for the rules)
- set proper sbin path for dmsetup and blkid, /sbin first, then /usr/sbin.
This is necessary for anaconda to work properly.
- add 'last_rule' for cryptsetup's temporary devices (symlinks in /dev/mapper
only)
