IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixed syntax parsing means that some commands that used to work are now
failing. Particullary this case:
$ invalid lvcreate -l1 --type thin vg/pool
> Needs to fail becase thin type LV needs --virtualsize
$ invalid lvcreate --type snapshot vg/lv1
> Needs to fail because old-snapshot segment type needs --size
Some reported error messages have been also updated.
If we want to support conversion of VG to clustered type,
we currently need to relock active LV to get proper DLM lock.
So add extra loop after change of VG clustered attribute
to exlusively activate all active top level LVs.
When doing change -cy -> -cn we should validate LVs are not
active on other cluster nodes - we could be sure about this only
when with local exclusive activation - for other types
we require user to deactivate volumes first.
As a workaround for this limitation there is always
locking_type = 0 which amongs other skip the detection
of active LVs.
FIXME:
clvmd should handle looks for cluster locking type all the time.
While we could probably reacquire some type of lock when
going from non-clustered to clustered vg, we don't have any
single road back to drop the lock and keep LV active.
For now keep it safe and prohibit conversion when LV
is active in the VG.
We used to print an error message whenever we tried to deal with devices that
lvmetad knew about but were rejected by a client-side filter. Instead, we now
check whether the device is actually absent or only filtered out and only print
a warning in the latter case.
Commit 5ebff6cc9f seemed to introduce
new 'for' loop but the mode is not yet used.
But the access to /dev dir needs to go through $DM_DEV_DIR
and whole path needs to be in "".
Since the type passed LV is changed and content of data detroyed,
query user with prompt to confirm this operation.
Also add a proper wiping of header.
Using '--yes' will skip this prompt:
lvconvert -s --yes vg/lv vg/lvcow
Commit 33d69162e4 reduced the number of
PVs to a level where the test could not function. (It is impossible
to replace 3 PVs of a 4-way RAID1 LV if there are only 5 PVs.)
When repairing RAID LVs that have multiple PVs per image, allow
replacement images to be reallocated from the PVs that have not
failed in the image if there is sufficient space.
This allows for scenarios where a 2-way RAID1 is spread across 4 PVs,
where each image lives on two PVs but doesn't use the entire space
on any of them. If one PV fails and there is sufficient space on the
remaining PV in the image, the image can be reallocated on just the
remaining PV.
I've changed build_parallel_areas_from_lv to take a new parameter
that allows the caller to build parallel areas by LV vs by segment.
Previously, the function created a list of parallel areas for each
segment in the given LV. When it came time for allocation, the
parallel areas were honored on a segment basis. This was problematic
for RAID because any new RAID image must avoid being placed on any
PVs used by other images in the RAID. For example, if we have a
linear LV that has half its space on one PV and half on another, we
do not want an up-convert to use either of those PVs. It should
especially not wind up with the following, where the first portion
of one LV is paired up with the second portion of the other:
------PV1------- ------PV2-------
[ 2of2 image_1 ] [ 1of2 image_1 ]
[ 1of2 image_0 ] [ 2of2 image_0 ]
---------------- ----------------
Previously, it was possible for this to happen. The change makes
it so that the returned parallel areas list contains one "super"
segment (seg_pvs) with a list of all the PVs from every actual
segment in the given LV and covering the entire logical extent range.
This change allows RAID conversions to function properly when there
are existing images that contain multiple segments that span more
than one PV.
If a RAID LV has images that are spread across more than one PV
and you allocate a new image that requires more than one PV,
parallel_areas is only honored for one segment. This commit
adds a test for this condition.
Fix gcc warnings:
libdm-report.c:1952:5: warning: "end_op_flag_hit" may be used uninitialized in this function [-Wmaybe-uninitialized]
libdm-report.c:2232:28: warning: "custom" may be used uninitialized in this function [-Wmaybe-uninitialized]
And snap_percent is not 0% in dm < 1.10.0 so
don't test comparison with 0% here.
pvmove can be used to move single LVs by name or multiple LVs that
lie within the specified PV range (e.g. /dev/sdb1:0-1000). When
moving more than one LV, the portions of those LVs that are in the
range to be moved are added to a new temporary pvmove LV. The LVs
then point to the range in the pvmove LV, rather than the PV
range.
Example 1:
We have two LVs in this example. After they were
created, the first LV was grown, yeilding two segments
in LV1. So, there are two LVs with a total of three
segments.
Before pvmove:
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
PV | 000 - 255 | 256 - 511 | 512 - 767 |
-------------------------------------
After pvmove inserts the temporary pvmove LV:
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
pvmove0 | seg 0 | seg 1 | seg 2 |
-------------------------------------
| | |
-------------------------------------
PV | 000 - 255 | 256 - 511 | 512 - 767 |
-------------------------------------
Each of the affected LV segments now point to a
range of blocks in the pvmove LV, which purposefully
corresponds to the segments moved from the original
LVs into the temporary pvmove LV.
The current implementation goes on from here to mirror the temporary
pvmove LV by segment. Further, as the pvmove LV is activated, only
one of its segments is actually mirrored (i.e. "moving") at a time.
The rest are either complete or not addressed yet. If the pvmove
is aborted, those segments that are completed will remain on the
destination and those that are not yet addressed or in the process
of moving will stay on the source PV. Thus, it is possible to have
a partially completed move - some LVs (or certain segments of LVs)
on the source PV and some on the destination.
Example 2:
What 'example 1' might look if it was half-way
through the move.
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
pvmove0 | seg 0 | seg 1 | seg 2 |
-------------------------------------
| | |
| -------------------------
source PV | | 256 - 511 | 512 - 767 |
| -------------------------
| ||
-------------------------
dest PV | 000 - 255 | 256 - 511 |
-------------------------
This update allows the user to specify that they would like the
pvmove mirror created "by LV" rather than "by segment". That is,
the pvmove LV becomes an image in an encapsulating mirror along
with the allocated copy image.
Example 3:
A pvmove that is performed "by LV" rather than "by segment".
--------- ---------
| LV1s0 | | LV2s0 |
--------- ---------
| |
-------------------------
pvmove0 | * LV-level mirror * |
-------------------------
/ \
pvmove_mimage0 / pvmove_mimage1
------------------------- -------------------------
| seg 0 | seg 1 | | seg 0 | seg 1 |
------------------------- -------------------------
| | | |
------------------------- -------------------------
| 000 - 255 | 256 - 511 | | 000 - 255 | 256 - 511 |
------------------------- -------------------------
source PV dest PV
The thing that differentiates a pvmove done in this way and a simple
"up-convert" from linear to mirror is the preservation of the
distinct segments. A normal up-convert would simply allocate the
necessary space with no regard for segment boundaries. The pvmove
operation must preserve the segments because they are the critical
boundary between the segments of the LVs being moved. So, when the
pvmove copy image is allocated, all corresponding segments must be
allocated. The code that merges ajoining segments that are part of
the same LV when the metadata is written must also be avoided in
this case. This method of mirroring is unique enough to warrant its
own definitional macro, MIRROR_BY_SEGMENTED_LV. This joins the two
existing macros: MIRROR_BY_SEG (for original pvmove) and MIRROR_BY_LV
(for user created mirrors).
The advantages of performing pvmove in this way is that all of the
LVs affected can be moved together. It is an all-or-nothing approach
that leaves all LV segments on the source PV if the move is aborted.
Additionally, a mirror log can be used (in the future) to provide tracking
of progress; allowing the copy to continue where it left off in the event
there is a deactivation.
With recent changes introduced with the report selection support,
the content of lv_modules field is of string list type (before
it was just string type).
String list elements are always ordered now so update lvcreate-thin
test to expect the elements to be ordered.
When creating a cache LV with a RAID origin, we need to ensure that
the sub-LVs of that origin properly change their names to include
the "_corig" extention of the top-level LV. We do this by first
performing a 'lv_rename_update' before making the call to
'insert_layer_for_lv'.
Instead of rereading device list via cat - keep
the list in bash array. (Also solves problem
with spaces in device path)
Move usage of "$path" out of lvm shell usage,
since we don't support such thing there...
When directly corrupting RAID images for the purpose of testing,
we must use direct I/O (or a 'sync' after the 'dd') to ensure that
the writes are not caught in the buffer cache in a way that is not
reachable by the top-level RAID device.
Unsure if this is feature or bug of syncaction,
but it needs to be present physically on the media
and it ignores content of buffer cache...
(maybe lvchange should implicitely fsync all disks
that are members of raid array before starting test??)
Check we know how to handle same UUID
Test currently does NOT work on lvmetad
(or it's unclear it even should - thus test error
is currently lowered to 'test warning')
TODO: replace lib/test with a better shell script name
While the 'raid1/10' segment types were being handled inadvertently
by '_move_mirrors()', the parity RAIDs were not being properly checked
to ensure that the user had specified all necessary PVs when moving
them. Thus, internal errors were being triggered when only part of
a RAID LV was moved to the new VG. I've added a new function,
'_move_raid()', which properly checks over any affected RAID LVs and
ensures that all the necessary PVs are being moved.
vgsplit of RAID volumes was problematic because the metadata area
and data areas were always on the same PVs. This problem is similar
to one that was just fixed for mirrors that had log and images sharing
a PV (commit 9ac858f). We can now add RAID LVs to the tests for
vgsplit.
Note that there still seems to be an issue when specifying an
incomplete set of PVs when moving RAID LVs.
Given a named mirror LV, vgsplit will look for the PVs that compose it
and move them to a new VG. It does this by first looking at the log
and then the legs. If the log is on the same device as one of the mirror
images, a problem occurs. This is because the PV is moved to the new VG
as the log is processed and thus cannot be found in the current VG when
the image is processed. The solution is to check and see if the PV we are
looking for has already been moved to the new VG. If so, it is not an
error.
Since the kill may take various amount of time,
(especially when running with valgrind)
check it's really pvmoved LV.
Restore initial restart of clvmd - it's currently
broken at various moments - basically killed lvm2
command may leave clvmd and confusing state leading
to reports of internal errors.
TODO:
It seems commit 7e685e6c70
has changed the old logic, when 'pvs device_name' used
to work. (regression from 2.02.104)
Currently put in extra pvscan.
