IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We need defaults for pvcreate_params at a higher level - this will
allow us to use a common function from the tools to take defaults,
then fill in any non-defaults from the commandline.
Future patches will refactor vgcreate/vgextend to call this function
if one or more pvcreate parameters are given on the commandline.
Another refactoring for implicit pvcreate support. We need to get
the pvcreate parameters somehow to the vg_extend routine. Options
seemed to be:
1. Attach the parameters to struct volume_group. I personally
did not like this idea in most cases, though one could make an
agrument why it might be ok at least for some of the parameters
(e.g. metadatacopies).
2. Pass them in to the extend routine. This second route seemed
to be the best approach given the constraints.
Future patches will parse the command line and fill in the actual
values for the pvcreate_single call.
Should be no functional change.
Of the vgs field vg_attr, a few of the most likely to be used attributes
are clustered, exported, and partial. This patch adds the following 3
functions:
uint64_t lvm_vg_is_clustered(const vg_t vg)
uint64_t lvm_vg_is_exported(const vg_t vg)
uint64_t lvm_vg_is_partial(const vg_t vg)
Now that we've refactored the internal library functions that do the
vg_remove, we can handle the deferred commit of a lvm_vg_remove() inside
lvm_vg_write(). This makes the VG create/remove API more consistent in
terms of disk commits - they now both require an lvm_vg_write() to commit
the create or remove to disk.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Split vg_remove_single into vg_remove_check (mandatory checks before
vgremove) and vg_remove (do actual remove by committing to disk).
In liblvm, we'd like to provide an consistent API that allows multiple
changes in memory, then let lvm_vg_write() control the commit to disk. In
some cases (for example, lvresize calls fsadm) this may not be possible.
However, since we are using an object model and dividing things into small
operations, the most logical model seems to be the lvm_vg_write model, and
handling the special cases as they arrive. So as best as possible
we move towards this end.
A possible optimization would be to consolidate vg_remove (committing)
code with vgreduce code. A second possible optimization is making vgreduce
of the last device equivalent to vgremove. Today, lvm_vg_reduce fails if
vgreduce is called with the last device, but from an object model perspective
we could view this as equivalent to vgremove and allow it. My gut feel is
we do not want to do this though.
Author: Dave Wysochanski <dwysocha@redhat.com>
This patch update pv_t handle to be consistent with lvm_t - define as a pointer
to internal struct physical_volume.
Author: Dave Wysochanski <dwysocha@redhat.com>
This patch update lv_t handle to be consistent with lvm_t - define as a pointer
to internal struct logical_volume.
Author: Dave Wysochanski <dwysocha@redhat.com>
This patch update vg_t handle to be consistent with lvm_t - define as a pointer
to internal struct volume_group.
Author: Dave Wysochanski <dwysocha@redhat.com>
For now, a simple way to enforce the read/write semantics is to just save the
open mode of the VG. If the caller uses lvm_vg_create, the mode is write.
The caller using lvm_vg_open can use either read or write to open the VG.
Once we have this, we enforce the permissions on each API call and don't allow
a caller to modify a VG that has not been opened properly.
This may be better combined with the locking mode, but I view that as future
cleanup, past this initial release. The intial release should enforce the
basic object semantics though, as described in the lvm.h file.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Adding the ability to get the seqno is important for an application to
determine if something has changed in a VG. Otherwise, the only way to
know is to open the VG with write permission and hold the handle.
This addresses a a large amount of Alasdair's review. Subsequent patches
will address remaining issues.
Addressed:
// FIXME Mention that's also required on error.
// FIXME Be consistent in terminology. It's called "system_dir" then last sentence says "system directory setting". Is it referring to "system_dir" there or something else?
// FIXME Mention it frees all resources and cannot be used subsequently?
// FIXME What does "any system configuration" mean?
// FIXME Expand on that explanation a bit, now that we know what the other fns look like.
// FIXME Not sure about that - it needs to scan sometimes. "will not" or "might not" ?
// FIXME: That's a FIXME in the code!!!
// FIXME What does "copied" mean in this context???
// FIXME Say what struct the returned struct dm_list is a list of...
// FIXME "This API" ? This function creates an object in memory?
// FIXME This function commits the Volume Group object referenced by the VG handle to disk?
// FIXME Where is "Name" defined? Absolute pathname?
Outstanding:
// FIXME Version function first? No structs or handles needed for that.
// FIXME Sort out this alignment. "Set an" directly below "system_dir" looks awful. Indent differently? More blank lines?
// FIXME Check how doxygen processes this. E.g. "return: LVM handle. You must use lvm_error() to check there were no errors and confirm that the handle is valid for passing to other functions."
// FIXME Find a better name. lvm_init.
// FIXME Consider renaming according to the new name for lvm_create.
// FIXME Please can we use dm_malloc throughout?
Allowing the caller to override the LVM configuration with an API will
enable them to use things such as device filters.
While very flexible, there is some danger to this API in that it will
make it harder to debug setups that have a changing config and deduce
what might have happened. At some point we may want to limit the scope
of this API but for now it is as open as the --config option to lvm commands.
Update exported symbols. When I renamed lvm_reload_config to lvm_config_reload
I forgot to rename so I renamed that one here.
This I believe is the last liblvm API for now. ;-)
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
These lower-priority interfaces are not currently implemented in liblvm
but are on the TODO list in the near term.
Author: Thomas Woerner <twoerner@redhat.com>
Acked-by: Dave Wysochanski <dwysocha@redhat.com>
Extend lvm_vg_write to remove pvs removed in lvm_vg_reduce. The lvm
volume_group internal structure removed_pvs is used for that. The list is
empty afterwards.
Add new test for vg->pvs emptyness to lvm_vg_write to prevent to write empty
vgs. This is needed because of lvm_vg_reduce and lv_vg_create, which creates
empty vgs.
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Acked-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
The two liblvm functions that return a list of vgnames and vguuids use
cmd->mem to allocate the list. Make it clear to the caller that this
memory will be freed when the LVM handle is freed.
Clean up and clarify the return value of the functions. In the
case of a memory allocation error, add a couple log_errnos to the internal
code, and make it clear that memory allocation returns a NULL pointer.
If there are no VGs in the system, the list returned is an empty list.
Make a note of the fact that currently we return hidden VG names, how
these can be detected (always start with "#"), and that they should
not be used.
Author: Dave Wysochanski <dwysocha@redhat.com>
The general naming scheme for most liblvm APIs is:
lvm_<object>_<action>
As there are likely to be other things to do on the lvm 'config' object
(i.e. lvm_config_set_device_filter), we should use consistent naming.
Author: Dave Wysochanski <dwysocha@redhat.com>
Limited implementation but other types of activation should probably have
separate calls. We also currently do not handle pvmoves or lvconverts.
Author: Dave Wysochanski <dwysocha@redhat.com>
For now, we use the following scheme.
For APIs that return an int, success is 0, fail is -1.
APIs that return handles, success is non-NULL, fail is NULL.
At this early stage, liblvm error handling mechanism is subject to change,
but for now we go with this simple scheme consistent with system
programming.
Author: Dave Wysochanski <dwysocha@redhat.com>
Hard to divide into smaller patches because of the moving around and
commenting, so just put in the new file diffs. We will review and can
update as necessary.
Author: Dave Wysochanski <dwysocha@redhat.com>
Add a very simple version of lvm_vg_remove_lv.
Since we currently can only create linear LVs, this simple remove function
is adequate. We must refactor lvremove_single a bit.
Author: Dave Wysochanski <dwysocha@redhat.com>
Add the most straightforward 'get' functions required for anaconda.
These are the ones that return simple uint64_t values.
The other more complex ones involve the lv_attr bits. These will
come in a separate patch series since each lv_attr bit will be returned
in a separate API instred of returning the string and requiring the
user to parse it.
Author: Dave Wysochanski <dwysocha@redhat.com>
