IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When command is not using lvmetad because
use_lvmetad=0 in the config, but the lvmetad
pidfile exists, print a warning (previously
this checked for the socket existing instead
of the pidfile existing.)
vg/snapshotN should not appear anywhere.
No code should be showing this, but it was noticed in some logs last
week and we can deal with it in display_lvname().
When user requested on cmdline disabling of lvmetad/lvmpoll,
respect it and when lvmlockd requires these daemon,
Error configure with clear message about misconfiguration.
The lvmetad connection is created within the
init_connections() path during command startup,
rather than via the old lvmetad_active() check.
The old lvmetad_active() checks are replaced
with lvmetad_used() which is a simple check that
tests if the command is using/connected to lvmetad.
The old lvmetad_set_active(cmd, 0) calls, which
stopped the command from using lvmetad (to revert to
disk scanning), are replaced with lvmetad_make_unused(cmd).
The test was a weak attempt at verifying the special
combination of lvchange/vgchange -aay --sysinit, but
was only looking for lvmetad connection warnings.
Update the warning checks, and check the LV activation
state directly which is the main point.
Rename the test to reflect its purpose of checking
the -aay --sysinit combination.
Update the check about lvmetad running but not used.
Also add tests related to the new lvmetad disabled state.
lvm1 metadata is used here to test the disabled state
because lvm1 metadata is the first condition using the
disabled state.
After a device rescan that repopulates lvmetad,
if no reason for disabling lvmetad was seen
(lvm1 metadata or duplicate PVs), then clear
the disabled flag in lvmetad. This allows
commands to resume using the lvmetad cache
after the cause for disabling it has been removed.
Commands already check if the lvmetad token is valid,
and if not, they rescan devices to repopulate lvmetad
before running. Now, in addition to checking the
lvmetad token, they also check if the lvmetad disabled
flag is set. If so, they do not use the lvmetad cache
and revert to disk scanning.
A global flag in lvmetad indicates it has been disabled.
Other flags indicate the reason it was disabled.
These flags can be queried using get_global_info.
The lvmetactl debugging utility can set and clear the
disabled flag in lvmetad. Nothing else sets the
disabled flag yet.
Commands will check these flags after connecting to
lvmetad. If the disabled flag is set, the command
will not use the lvmetad cache, but revert to disk
scanning.
To test this feature:
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 0
disable_reason = "none"
token = "filter:3041577944"
$ vgs
(should report VGs from lvmetad)
$ lvmetactl set_global_disable 1
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 1
disable_reason = "DIRECT"
token = "filter:3041577944"
$ vgs
WARNING: Not using lvmetad because the disable flag was set directly.
(should report VGs without contacting lvmetad)
$ lvmetactl set_global_disable 0
$ vgs
(should report VGs from lvmetad)
process_each_pv was doing:
1. lvmcache_seed_infos_from_lvmetad()
sends pv_list request to lvmetad.
2. get_vgnameids()
sends vg_list request to lvmetad.
3. _get_all_devices()
first calls lvmcache_seed_infos_from_lvmetad(),
which is a no-op if it's already been called.
Because get_vgnameids() does not use the information
from lvmcache_seed_infos_from_lvmetad(), it does not
need to be called prior to get_all_devices where
it is actually needed.
Improve code for snapshot merge for readabilty
and also reduce number of tests needed to decide
if merging can or cannot be started.
(Further improving 9cccf5245a)
When dm_tree_find_node_by_uuid() fails to find passed uuid,
report in lof_debug the complete original uuid,
not the one stripped of LVM- prefix.
TODO: inspect manipulation with LVM- prefix here.
To recognize in runtime if we are merging or not
to make consistent decision between suspend and resume
add function to parse thin table line when add
merging thin device to the table.
A snapshot merge into its origin cannot be initiated while the devices
are in use. If there is outside interference (such as from udev),
the suspend (preload) and resume stages can reach conflicting decisions
about whether or not to proceed.
Try to make the logic more robust by checking the inactive or live
table during resume. (This is still not perfect.)
Commit 971ab733b7 ("thin: activation of
merging thin snapshot") also added an incorrect deactivation attempt
for non-thin LVs: find_snapshot(lv)->lv is not designed to be
activated and any attempt to deactivate it is incorrect.
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
