IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Creation, deletion, [de]activation, repair, conversion, scrubbing
and changing operations are all now available for RAID LVs in a
cluster - provided that they are activated exclusively.
The code has been changed to ensure that no LV or sub-LV activation
is attempted cluster-wide. This includes the often overlooked
operations of activating metadata areas for the brief time it takes
to clear them. Additionally, some 'resume_lv' operations were
replaced with 'activate_lv_excl_local' when sub-LVs were promoted
to top-level LVs for removal, clearing or extraction. This was
necessary because it forces the appropriate renaming actions the
occur via resume in the single-machine case, but won't happen in
a cluster due to the necessity of acquiring a lock first.
The *raid* tests have been updated to allow testing in a cluster.
For the most part, this meant creating devices with '-aey' if they
were to be converted to RAID. (RAID requires the converting LV to
be EX because it is a condition of activation for the RAID LV in
a cluster.)
Properly skip unmonitoring of thin pool volume in deactivation code
path. Code makes sure if there is just any thin pool user
it stays monitored with all its resources.
When the pool is created from non-linear target the more complex rules
have to be used and stacking needs to properly decode args for _tdata
LV. Also proper allocation policies are being used according to those
set in lvm2 metadata for data and metadata LVs.
Also properly check for active pool and extra code to active it
temporarily.
With this fix it's now possible to use:
lvcreate -L20 -m2 -n pool vg --alloc anywhere
lvcreate -L10 -m2 -n poolm vg --alloc anywhere
lvconvert --thinpool vg/pool --poolmetadata vg/poolm
lvresize -L+10 vg/pool
Udev daemon has recently introduced a limit on the number of udev
processes (there was no limit before). This causes a problem
when calling pvscan --cache -aay in lvmetad udev rules which
is supposed to activate the volumes. This activation is itself
synced with udev and so it waits for the activation to complete
before the pvscan finishes. The event processing can't continue
until this pvscan call is finished.
But if we're at the limit with the udev process count, we can't
instatiate any more udev processes, all such events are queued
and so we can't process the lvm activation event for which the
pvscan is waiting.
Then we're in a deadlock since the udev process with the
pvscan --cache -aay call waits for the lvm activation udev
processing to complete, but that will never happen as there's
this limit hit with the number of udev processes.
The process with pvscan --cache -aay actually times out eventually
(3min or 30sec, depends on the version of udev).
This patch makes it possible to run the pvscan --cache -aay
in the background so the udev processing can continue and hence
we can avoid the deadlock mentioned above.
The commit 82d83a01ce
"autoactivation: refresh existing VG before autoactivation"
causes problems (dangling udev_sync cookies, slow processing
of the pvscan --cache --major --minor call from udev rules)
when the autoactivation handler is run in parallel on
several PVs that belong to the same VG. Revert this patch
until the exact source of the problem is found and then
properly fixed and handled.
Remove default "/tmp" as destination directory if no args
specified for lvm2-activation-generator. Require all the
args to be specified directly for proper functionality.
The patch allows the user to also pvmove snapshots and origin logical
volumes. This means pvmove should be able to move all segment types.
I have, however, disallowed moving converting or merging logical volumes.
Top-level LVs (like RAID, mirror or thin) are ignored when determining which
portions of an LV to pvmove. If the user specified the name of an LV to
move and it was one of the above types, it would be skipped. The code would
never move on to check whether its sub-LVs needed moving because their names
did not match what the user specified.
The solution is to check whether a sub-LVs is part of the LV whose name was
specified by the user - not just if there was a name match.
This patch allows pvmove to operate on RAID, mirror and thin LVs.
The key component is the ability to avoid moving a RAID or mirror
sub-LV onto a PV that already has another RAID sub-LV on it.
(e.g. Avoid placing both images of a RAID1 LV on the same PV.)
Top-level LVs are processed to determine which PVs to avoid for
the sake of redundancy, while bottom-level LVs are processed
to determine which segments/extents to move.
This approach does have some drawbacks. By eliminating whole PVs
from the allocation list, we might miss the opportunity to perform
pvmove in some senarios. For example, if we have 3 devices and
a linear uses half of the first, a RAID1 uses half of the first and
half of the second, and a linear uses half of the third (FIGURE 1);
we should be able to pvmove the first device (FIGURE 2).
FIGURE 1:
[ linear ] [ -RAID- ] [ linear ]
[ -RAID- ] [ ] [ ]
FIGURE 2:
[ moved ] [ -RAID- ] [ linear ]
[ moved ] [ linear ] [ -RAID- ]
However, the approach we are using would eliminate the second
device from consideration and would leave us with too little space
for allocation. In these situations, the user does have the ability
to specify LVs and move them one at a time.
Do not print success status for lvm2-activation-generator:
"LVM: Activation generator successfully completed."
"LVM: Logical Volume autoactivation enabled." (if use_lvmetad=1)
Though this information is quite useful during boot, it may
be confusing for users if it happens anytime later and it
actually happens if systemd reloads. This is usually on package
update to update the systemd state and load any new units that are
newly installed in the system. The systemd reload is global and
so any existing generators are rerun at that moment too.
This is a regression caused by commit 3bd9048854.
The error message added with that commit "mpath major %d is not dm major %d" is
superfluous.
When scanning for mpath components, we're looking for a parent device.
But this parent device is not necessarily an mpath device (so the dm device)
if it exists - it can be any other device layered on top (e.g. an MD RAID device).
The bug addressed by this patch manifested itself during testing
by showing a mirror that never became 'in-sync' after creation.
The bug is isolated to distributions that do not have support
for openAIS checkpointing (i.e. > RHEL6, > F16).
When a node joins a group that is managing a mirror log, the other
machines in the group send it a checkpoint representing the current
state of the bitmap. More than one machine can send a checkpoint,
but only the initial one should be imported. Once the bitmap state
has been imported from the initial checkpoint, operations (such
as resync, mark, and clear operations) can begin. When subsequent
checkpoints are allowed to be imported, it has the effect of erasing
all the log operations between the initial checkpoint and the ones
that follow.
When cmirrord was updated to handle the absence of openAIS
checkpointing (commit 62e38da133),
the new import_checkpoint() function failed to honor the 'no_read'
parameter. This parameter was designed to avoid reading all but
the initial checkpoint. Honoring this parameter has solved the
issue of corrupting bitmap data with secondary checkpoints.
If loop device is first configured on systems where /dev/loop-control
is used to dynamically create the loop device itself, there's an
ADD+CHANGE even generated. But next time the existing /dev/loop[0-9]*
is reused, there's only a CHANGE event since the device representing
it is already present in kernel (so no ADD event in this case).
We can't ignore this CHANGE event for loop devices! This is a regression
caused by 756bcabbfe. We already had
a similar problem with MD devices which was fixed by
2ac217d408 (but that one was
only an intra-release fix).
When autoactivating a VG, there could be an existing VG with exactly
the same PV UUIDs. The PVs could be reappeared after previous
loss/disconnect (for example disconnecting and reconnecting iscsi).
Since there's no "autodeactivation" yet, the mappings for the LVs
from the VG were left in the system even if the device was disconnected.
These mappings also hold the major:minor of the underlying device.
So if the device reappears, it is assigned a different major:minor
pair (...and kernel name). We need to cope with this during
autoactivation so any existing mappings are corrected for any changes.
The VG refresh does that (the vgchange --refresh functionality) -
call this before VG autoactivation.
(If the VG does not exist yet, the VG refresh is NOP)
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.
When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.
Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.
Log each filter initialisation to show sequence.
Avoid duplicate 'Using $device' debug messages.
Recent version of util-linux/umount (v2.23+) provides
umount --all-targets that can unmount all the mount targets of
the same device (the bind mounts). Use this if available when
calling the umount blkdeactivate.
Otherwise, for older versions of util-linux, use findmnt
(that is also a part of the util-linux) to iterate over all
mount targets of the same device - this is the manual way.
The blkdeactivate now suppresses error messages from external
tools that are called. Instead, only a summary message "done"
or "skipped" is issued by blkdeactivate as any error in calling
the external tool (e.g. unmounting or deactivating a device) causes
the device to be skipped and the blkdeactivate continues with the
next device in the tree.
Add new -e/--errors switch to display any error messages from
external tools.
Also, suppress any output given by the external tools and add
new -v/--verbose switch to display it including the verbose
output of the tools called (this will enable error reporting
as well).
Also add blkdeactivate -vv for even more debug (the script's debug).
84 files changed, 1540 insertions(+), 442 deletions(-)
Mostly bug fixes this time.
Also note:
md raid replaces dm mirroring as the default implementation.
Can call out to thin_repair to fix thin metadata.
Improved clvmd error detection/debugging information.
According to bug 995193, if a volume group
1) contains a mirror
2) is clustered
3) 'locking_type' = 0 is used
then it is not possible to remove the 'c'luster flag from the VG. This
is due to the way _lv_is_active behaves.
We shouldn't allow the cluster flag to be flipped unless the mirrors in
the cluster are not active. This is because different kernel modules
are used depending on whether a mirror is cluster or not. When we
attempt to see if the mirror is active, we first check locally. If it
is not, then we attempt to check for remotely active instances if the VG
is clustered. Since the no_lock locking type is LCK_CLUSTERED, but does
not implement 'query_resource', remote_lock_held will always return an
error in this case. An error from remove_lock_held is treated as though
the lock _is_ held (i.e. the LV is active remotely). This blocks the
cluster flag from changing.
The solution is to implement 'query_resource' for the no_lock type. It
will report a message and return 1. This will allow _lv_is_active to
function properly. The LV would be considered not active remotely and
the VG can change its flag.
1) Since the min|maxrecoveryrate args are size_kb_ARGs and they
are recorded (and sent to the kernel) in terms of kB/sec/disk,
we must back out the factor multiple done by size_kb_arg. This
is already performed by 'lvcreate' for these arguments.
2) Allow all RAID types, not just RAID1, to change these values.
3) Add min|maxrecoveryrate_ARG to the list of 'update_partial_unsafe'
commands so that lvchange will not complain about needing at
least one of a certain set of arguments and failing.
4) Add tests that check that these values can be set via lvchange
and lvcreate and that 'lvs' reports back the proper results.
gcc -O2 v4.8 on 32 bit architecture is causing a bug in parameter
passing. It does not happen with -01 nor -O0.
The problematic part of the code was strlen use in config.c in
the config_def_check fn and the call for _config_def_check_tree in it:
<snip>
rplen = strlen(rp);
if (!_config_def_check_tree(handle, vp, vp + strlen(vp), rp, rp + rplen, CFG_PATH_MAX_LEN - rplen, cn, cmd->cft_def_hash)) ...
</snip>
If compiled with -O0 (correct):
Breakpoint 1, config_def_check (cmd=0x819b050, handle=0x81a04f8) at config/config.c:775
(gdb) p vp
$1 = 0x8189ee0 <_cfg_path> "config"
(gdb) p strlen(vp)
$2 = 6
(gdb)
_config_def_check_tree (handle=0x81a04f8, vp=0x8189ee0 <_cfg_path>
"config", pvp=0x8189ee6 <_cfg_path+6> "", rp=0xbfffe1e8 "config",
prp=0xbfffe1ee "", buf_size=58, root=0x81a2568, ht=0x81a65
48) at config/config.c:680
(gdb) p vp
$4 = 0x8189ee0 <_cfg_path> "config"
(gdb) p pvp
$5 = 0x8189ee6 <_cfg_path+6> ""
If compiled with -O2 (incorrect):
Breakpoint 1, config_def_check (cmd=cmd@entry=0x8183050, handle=0x81884f8) at config/config.c:775
(gdb) p vp
$1 = 0x8172fc0 <_cfg_path> "config"
(gdb) p strlen(vp)
$2 = 6
(gdb) p vp + strlen(vp)
$3 = 0x8172fc6 <_cfg_path+6> ""
(gdb)
_config_def_check_tree (handle=handle@entry=0x81884f8, pvp=0x8172fc7
<_cfg_path+7> "host_list", rp=rp@entry=0xbffff190 "config",
prp=prp@entry=0xbffff196 "", buf_size=buf_size@entry=58, ht=0x
818e548, root=0x818a568, vp=0x8172fc0 <_cfg_path> "config") at
config/config.c:674
(gdb) p pvp
$4 = 0x8172fc7 <_cfg_path+7> "host_list"
The difference is in passing the "pvp" arg for _config_def_check_tree.
While in the correct case, the value of _cfg_path+6 is passed
(the result of vp + strlen(vp) - see the snippet of the code above),
in the incorrect case, this value is increased by 1 to _cfg_path+7,
hence totally malforming the string that is being processed.
This ends up with incorrect validation check and incorrect warning
messages are issued like:
"Configuration setting "config/checks" has invalid type. Found integer, expected section."
To workaround this issue, remove the "static" qualifier from the
"static char _cfg_path[CFG_PATH_MAX_LEN]". This causes the optimalizer
to be less aggressive (also shuffling the arg list for
_config_def_check_tree call helps).
If there is no RAID support in the kernel but the default mirror
segtype is "raid1", converting legacy mirrors can be problematic.
For example, changing the log type or converting a mirror to a linear
LV does not require the RAID modules to be present. However, because
lp->segtype is set to be RAID1 by the configuration file, the command
fails.
We should only be setting lp->segtype when converting mirrors if it is
going to change (e.g. to linear or between mirror types).
When creating a new thin pool and there's no profile requested
via "lvcreate --profile ...", inherit any VG profile if it's attached.
Currently this applies to these settings:
allocation/thin_pool_chunk_size
allocation/thin_pool_discards
allocation/thin_pool_zero
When creating a timeout thread for snapshots, the thread is not
tracked and thus never joined. This means that the exit status
of the timeout thread is held indefinitely. Saves a bit of
memory to set PTHREAD_CREATE_DETACHED when creating this thread.
I've also added pthread_attr_init|destroy to setup the creation
pthread_attr_t.
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
