IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently the code creates the log separately after allocating space for
the data and as no data allocation is needed this second time,
total_extents ends up holding zero so use new_extents directly instead.
Now with correctly functioning dmeventd enable usage of
low_water_mark for faster reaction on pool's threshold.
When user select e.g. 80% as a threshold value,
dmeventd doesn't need to wait 10 seconds till monitoring
timer expires, but nearly instantly resizes thin-pool
to fit bellow threshold.
The former patch(dab3ebce4c) is a little bit strict. For example, it is
OK to create PV on unpartitioned DASD devices with LDL formatted. So
after lvm version containing the patch, LVs created on those devices
could not be found.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Recognize the target only 'extends' and do not enforce
'flush' in this case. Only the size reduction
still requires flush (so disables usage of no_flush flag).
If some other targets do require flush before suspend,
they have to explicitly ask for it.
While the activation code tries to evaluate which target
really needs flush with suspend and which may go without flush,
it has stayed effectively disabled by original commit:
33f732c5e9 since here
it only allows to pass non-pvmoving 'mirrors'.
So remove check for mirror LV type and only disable
no_flush for 'pvmove'..
TODO: Looking into history - it also seemed like raid target
would have always required flushing but it's been later
removed without clean explanation.
If some more targets really do need 'no_flush' it should
been handle at their 'level' - since we now stack multiple
targets over itself.
Use single code to evaluate if the percentage value has
crossed threshold.
Recalculate amount value to always fit bellow
threshold so there are not need any extra reiterations
to reach this state in case policy amount is too small.
Since plugin's percentage compare has been fixed,
it's now revealed wrong compare here.
The logic for threshold is - to allow to go as high
as given value e.g. 80% - so if pool is exactlu 80%
full it's still allowed to use it (dmeventd will not
resize it).
When lvmetad is used and lvmcache update function (lvmcache_update_vgname_and_id)
was called to update existing lvmcache records, a condition was met
which made to retun from the update function immediately, effectively
making it NOOP.
It seems there's no reason for such condition and lvmcache should be
update appropriately even when lvmetad used as lvmcache may be reused,
most notably in lvm shell.
It's possible this is a remnant of the lvmetad development code which
didn't get removed for some reason and the bug didn't get spotted
because lvm shell is not used often (the condition dates back to 2012
or so).
Example, lvmetad and lvm shell used:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda vg lvm2 a-- 124.00m 124.00m
Before this patch:
==================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
With this patch applied:
========================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
The lvmcache info might be resued, most notably in lvm shell.
We need to be sure that even lvmcache_info marked as invalid
is removed from the lvmcache so it does not confuse any subsequent
code/commands executed later on.
Problematic example with the lvm shell:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
Before this patch (/dev/sda still displayed in a way):
======================================================
lvm> pvremove /dev/sda
Labels on physical volume "/dev/sda" successfully wiped
(without lvmetad)
lvm> pvs
No physical volume label read from /dev/sda
(with lvmetad)
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
With this patch applied:
========================
lvm> pvremove /dev/sda
Labels on physical volume "/dev/sda" successfully wiped
(without lvmetad)
lvm> pvs
(with lvmetad)
lvm> pvs
CONVERTING status flag is a tricky one. It's not set when converting
a non-mirror LV type to the mirror type, i.e.: linear -> two leg mirror.
Also the conversion itself is instant and doesn't require to be polled.
When mirror reaches sync state there's no final update on VG metadata
for lvmpolld to be made thereby report_progress in fact doesn't report
percentage of mirror being converted but percentage of mirror
being in sync. Perhaps we should reword the lvconvert output here.
On the other hand CONVERTING is set while we upconvert the mirror
from i.e. two leg mirror to four leg mirror. In such case the operation
is required to be polled so that lvmpolld can cleanup temporary
conversion log when the conversion is over.
Ignore CONVERTING lv_type for the moment and match LVs only by uuids
during 'mirror conversion'/'waiting for a sync to finish'.
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.
In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.
For example:
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""
$ lvs vg
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize
lvol0 vg -wi-a----- 4.00m
This reverts commit 1b1c01a27b.
This caused messages to get dropped instead of logged into the log file.
(The log file and log function are independent at the moment.)
Some signatures are spread around the disk in several copies, mainly for
backup. Make libblkid to detect these extra copies - there was missing
"blkid_probe_step_back" fn call after successful wipe of previous signature
copy.
An example with FAT table which has copies:
$ mkfs.vfat /dev/sda1
Before this patch:
$ pvcreate /dev/sda1
WARNING: vfat signature detected on /dev/sda1 at offset 54. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
With this patch applied:
$ pvcreate /dev/sda1
WARNING: vfat signature detected on /dev/sda1 at offset 54. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
WARNING: vfat signature detected on /dev/sda1 at offset 0. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
WARNING: vfat signature detected on /dev/sda1 at offset 510. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
$ vgcreate vgA /dev/sda
Volume group "vgA" successfully created
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ dd if=/dev/sda of=/dev/sdc bs=1M
(the new VG name is prefix of existing VG name)
$ vgimportclone -n vg /dev/sdb
(the new VG name is suffix of existing VG name)
$ vgimportclone -n gA /dev/sdc
Before this patch:
------------------
(we end up with "vg1" and "gA1" names with the "1" suffix which is not needed)
$ vgs -o vg_name
VG
gA1
vg1
vgA
With this patch applied:
------------------------
(we end up with "vg" and "gA" names as they're unique already and no extra suffix is added)
$ # vgs -o vg_name
VG
gA
vg
vgA
Of course, if the name supplied is not unique, the number is added correctly:
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ vgimportclone -n vgA /dev/sdb
$ vgs -o vg_name
VG
vgA
vgA1
We can replace the expressions with awk/grep/cut/tr with --select now and
more suitable reporting options and modes. Also, we don't need to check
the temporary lvm.conf generated within vgimportclone script since we're
generating it ourselves now using lvmconfig, not using sed anymore like
it was before (so we can be pretty sure it's correct - we use lvmconfig
now even for generating the lvm.conf itself).
We already have pv_count to report number of PVs that a VG has based
on metadata.
This patch exposes the information about how many of these PVs are
missing which is also useful information for a VG. Wwe could count
the sum of pv_missing reporting fields for each PV in the VG before,
but the new field is practical when reporting VG as a whole and there's
no need to process each PV from VG alone.
Before this patch:
$ lvs -a -o name,layout,role test/lvmlock
LV Layout Role
[lvmlock] linear public
With this patch applied:
$ lvs -a -o name,layout,role test/lvmlock
LV Layout Role
[lvmlock] linear private,lockd,sanlock
Add metadata_devices and seg_metadata_le_ranges report fields.
Currently only defined for raid, but should probably be extended
to all other segment types that don't report all their device
usage in the 'devices' field.
We want most of our units to be started before any local/remote mount
points are mounted - we used {local,remote}-fs.target for this purpose
before, but it was not 100% correct as there's even {local,remote}-fs-pre.target
special systemd unit reserved for this exact purpose.
See also man 7 systemd.special and "local-fs-pre.target"/"remote-fs-pre.target"
description.
When using lvm shell, some structures which are cached in memory may be
reused. This happens for the struct label (a part of lvmcache_info
structure) when lvmetad is used in which case the PV scan is not
done that would normally overwrite these label structures in memory
and making them up-to-date.
This is all consequence of the fact that struct lvmcache_info and
struct label are not always assigned in the same part of the code.
For example, if lvmetad *is not* used, parts of the struct label are
reassigned in label_read fn while struct lvmcache_info is created
elsewhere. No part of the code reused struct label (and its "dev"
field) before calling label_read fn. That's why the real bug is
hidden when using lvm shell without lvmetad.
However, with lvmetad and lvm shell, the situation is a bit different.
The label_read fn is not called if lvmetad *is* used, hence the
struct label may have ended up not initialized properly.
There was missing assignment for the dev field in struct label
in _text_pv_write fn which caused this problem to appear in
lvm shell with lvmetad, for example:
Before this patch:
lvm> pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
lvm> pvs /dev/sda
PV VG Fmt Attr PSize PFree
unknown device lvm2 --- 128.00m 128.00m
With this patch applied:
lvm> pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
lvm> pvs /dev/sda
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
Also, this problem had not appeared before changes introduced
by commits e1a63905d1 through
3a6f91d713 which, among other
things, added proper label field type reporting. Before, label
reporting was the same as using struct physical_volume which
has its own dev field assigned and so this problem was not exposed.
Commit 00b36ef06a had a typo
and missed '{' for shell variable, thus command used slightly
different 'tmp' dir name for cache dir (with extra '}').
Such change was unnoticed until a recent fix in persistent
filter, lvm2 missed to update cache file when --config
was specified.
The result was, /tmp dir was accumulating snap.XXXXX} dirs when
running vgimportclose script.
Since we may want to swap names when LVs are complex types, we cannot
avoid doing full renames on both LV stacks.
Temporarily use 'pvmove_tmeta' as unused name to prevent validation troubles.
ATM allocation can't handle stripping and cache pool allocation.
It's not yet even clear what should be actually result.
Until resolved, disable this option (it's been coredumping
inside allocation anyway).
Certain stacks of cached LVs may have unexpected consequences.
So add a warning function called when LV is cached to detect
such caces and WARN user about them - the best we could do ATM.
When we insert layer we also move status flag-bits for certain LV types,
so internal volume_group structure remains consistent.
(Perhaps it's misuse of 'insert_layer' function and we should have
another similar function for this.)
Basically we aim to maintain the same state as after reading fresh
metadata out of volume group.
Currently we when i.e. cache 'raid' LV - this should transfer 'raidLV' flag
to _corigin LV and cache is no longer a raid.
TODO: bits for stacked devices needs more exact rules.
Commit f6473baffc introduced a new
cmd->initialized variable to keep info about which parts of the
cmd_context have been initialized.
A part of this patch was also a change in refresh_filters fn
which checks for cmd->initialized.filters variable and it does
the filter refresh *only* if the filter has already been initialized
before otherwise it's a NOOP (before, the refresh_filters also
initialized filters as a side effect in case it had not been
initialized before which was not quite correct).
However, the commit f6473baffc
did not handle the case in which configuration changes
either via --config argument or when configuration file changed
and its timestamp was higher than the timestamp of the persistent
cache file - the /etc/lvm/cache/.cache.
This patch fixes this issue and it causes the init_filters fn
in lvm_run_command fn to be called with proper value of
"load_persistent_cache" switch even if the configuration changes,
hence causing the persistent cache file to be ignored in this
case.
Relocate generated configure.h and lvm-version.h outside
of compilable .c source tree.
The reason is behind - when compiling in builddir != srcdir
the generated file in lib/misc/configure.h was used for all compiled
source file except ones located in lib/misc dir - those would have used
configure.h file located in this dir - if there have existed one (i.e.
from some other build)
This problem was only visible, when srcdir == buildir was used before
trying to use srcdri != builddir (as configure.h appeared then in
srcdir).
As part of fix that came with cf700151eb,
I forgot to add the check whether the result of stat was successful or
not. This bug caused uninitialized buffer to be used for entries
from .cache file which are no longer valid.
This bug may have caused these uninitialized values to be used further,
for example (see the unreal (2567,590944) representing major:minor
pair):
$ pvs
/dev/abc: stat failed: No such file or directory
Path /dev/abc no longer valid for device(2567,590944)
PV VG Fmt Attr PSize PFree
/dev/mapper/test lvm2 --- 104.00m 104.00m
/dev/vda2 rhel lvm2 a-- 9.51g 0
Since we may easily get blocked when checking for percentage
of thin-pool - do not flush and just show current values.
This avoids holding VG locked when pool is overfilled.
Try to detect thin-pool which my block lvm2 command from furher
processing (i.e. lvextend).
Check if pool is read-only or out-of-space and in this case thins
will skipped from being scanned (so user may miss some PVs located
on thin volumes).
Fix regression introduced with commit:
2fc126b00d
This commit has moved pv_min_size() test in front
of device_is_usable(). However pv_min_size needs to open device,
so it may have actually get blocked.
So restore the original order and first validate
dm device to be usable for open.
It's worth to note that such check is not 'race-free',
but it usually eliminates 99.99% of problems ;).
Previously all stderr messages issued by spawned lvpoll command were reported
as INFO only. This made all such messages invisible in syslog or lvmpolld log
while running default configuration.
All lvpoll stderr messages are loged with WARN priority now and lvpoll
command exiting with retcode != 0 is logged with ERROR priority in
syslog and lvmpolld log
Originally when vgdisplay encountered an exported VG it issued a
WARNING. Commit d6b1de30 replaced this with an error message
but still exited with success (incorrect). A backtrace was recently
added in commit b193809987.
As vgdisplay already states that the VG is exported in its output,
just drop these messages completely.
Since commit 797c18d543 some internal symbols
have been exported in shared libraries by mistake because 'local: *' got
lost. Fix the shell script not to compare the whole filename with
'Base'
All cache args could be specified when caching LV
(means converting LV to cached).
When --cachemode arg is given during cache-pool conversion,
store it in the metadata.
https://bugzilla.redhat.com/show_bug.cgi?id=1255184
Since cache-pool actualy keeps info about caching,
display this info for cache-pool LV as well
(matches info for cache LV when cache-pool is asociated with it).
Change logic and naming of some internal API functions.
cache_set_mode() and cache_set_policy() both take segment.
cache mode is now correctly 'masked-in'.
If the passed segment is 'cache' segment - it will automatically
try to find 'defaults' according to profiles if the are NOT
specified on command line or they are NOT already set for cache-pool.
These defaults are never set for cache-pool.
Add new profilable configurables:
allocation/cache_policy
allocation/cache_settings
and mark allocation/cache_pool_chunk_size as profilable as well.
Obsolete allocation/cache_pool_cachemode and
introduce new allocation/cache_mode instead.
Rename DEFAULT_CACHE_POOL_POLICY to DEFAULT_CACHE_POLICY.
When a command is flagged with NO_METADATA_PROCESSING flag, it means
such command does not process any metadata and hence it doens't require
lvmetad, lvmpolld and it can get away with no locking too. These are
mostly simple commands (like lvmconfig/dumpconfig, version, types,
segtypes and other builtin commands that do not process metadata
in any way).
At first, when lvm command is executed, create toolcontext without
initializing connections (lvmetad,lvmpolld) and without initializing
filters (which depend on connections init). Instead, delay this
initialization until we know we need this. That is, until the
lvm_run_command fn is called in which we know what the actual
command to run is and hence we can avoid any connection, filter
or locking initiliazation for commands that would not make use
of it anyway.
For all the other create_toolcontext calls, we keep the original
behaviour - the filters and connections are initialized together
with the toolcontext.
This is a regression introduced by commit
6c0e44d5a2 which changed
the way dev_cache_get fn works - before this patch, when a
device was not found, it fired a full rescan to correct the
cache. However, the change coming with that commit missed
this full_rescan call, causing the lvmcache to still contain
info about PVs which should be filtered now.
Such situation may have happened by coincidence of using
old persistent cache (/etc/lvm/cache/.cache) which does not
reflect the actual state anymore, a device name/symlink which
now points to a device which should be filtered and a fact we
keep info about usable DM devices in .cache no matter what
the filter setting is.
This bug could be hidden though by changes introduced in
commit f1a000a477 as it
calls full_rescan earlier before this problem is hit.
But we need to fix this anyway for the dev_cache_get
to be correct if we happen to use the same code path
again somewhere sometime.
For example, simple reproducer was (before commit
1a000a477558e157532d5f2cd2f9c9139d4f87c):
- /dev/sda contains a PV header with UUID y5PzRD-RBAv-7sBx-V3SP-vDmy-DeSq-GUh65M
- lvm.conf: filter = [ "r|.*|" ]
- rm -f .cache (to start with clean state)
- dmsetup create test --table "0 8388608 linear /dev/sda 0" (8388608 is
just the size of the /dev/sda device I use in the reproducer)
- pvs (this will create .cache file which contains
"/dev/disk/by-id/lvm-pv-uuid-y5PzRD-RBAv-7sBx-V3SP-vDmy-DeSq-GUh65M"
as well as "/dev/mapper/test" and the target node "/dev/dm-1" - all the
usable DM mappings (and their symlinks) get into the .cache file even
though the filter "is set to "ignore all" - we do this - so far it's OK)
- dmsetup remove test (so we end up with /dev/disk/by-id/lvm-pv-uuid-...
pointing to the /dev/sda now since it's the underlying device
containing the actual PV header)
- now calling "pvs" with such .cache file and we get:
$ pvs
PV VG Fmt Attr PSize PFree
/dev/disk/by-id/lvm-pv-uuid-y5PzRD-RBAv-7sBx-V3SP-vDmy-DeSq-GUh65M vg lvm2 a-- 4.00g 0
Even though we have set filter = [ "r|.*|" ] in the lvm.conf file!
Simply running concurrent copies of 'pvscan | true' is enough to make
clvmd freeze: pvscan exits on the EPIPE without first releasing the
global lock.
clvmd notices the client disappear but because the cleanup code that
releases the locks is triggered from within some processing after the
next select() returns, and that processing can 'break' after doing just
one action, it sometimes never releases the locks to other clients.
Move the cleanup code before the select.
Check all fds after select().
Improve some debug messages and warn in the unlikely event that
select() capacity could soon be exceeded.
Recent change to move the polling outside of core lvconvert
code was wrongly using 'lv' and 'vg' structs which can't be
used outside of the core code, which caused seg fault.
Properly isolate all use of lv structs within the core of
the lvconvert code, saving any information necessary,
(esp lvid). After the core of lvconvert is done, use
the saved information to do polling.
FIXME: the need for is_merging_origin and is_merging_origin_thin
in this patch is ugly, and a cleaner way should be found to deal
with that than what is done here.
Also it effectively removed all hacks in _lvconvert_merge_single
performing ugly: VG reread, unlock, polling, lock sequence.
Moreover all polling operations are postponed after all conversions
are finished.
lvm2 (while locking via lvmlockd) should now be able to run with
or without lvmpolld while performing poll operations originating
in lvconvert command.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
libblkid may return the list of signatures found, but it may not
provide offset and size for each signature detected. This may
happen in case signatures are mixed up or there are more, possibly
overlapping, signatures found.
Make lvm commands pass if such situation happens and we're using
--force (or any stronger force method).
For example:
$ pvcreate /dev/sda1
Failed to get offset of the xfs_external_log signature on /dev/sda1.
1 existing signature left on the device.
Aborting pvcreate on /dev/sda1.
$ pvcreate --force /dev/sda1
Failed to get offset of the xfs_external_log signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
A segfault was reported when extending an LV with a smaller number of
stripes than originally used. Under unusual circumstances, the cling
detection code could successfully find a match against the excess
stripe positions and think it had finished prematurely leading to an
allocation being pursued with a length of zero.
Rename ix_offset to num_positional_areas and move it to struct
alloc_state so that _is_condition() can obtain access to it.
In _is_condition(), areas_size can no longer be assumed to match the
number of positional slots being filled so check this newly-exposed
num_positional_areas directly instead. If the slot is outside the
range we are trying to fill, just ignore the match for now.
(Also note that the code still only performs cling detection against
the first segment of the LV.)
Keep policy name separate from policy settings and avoid
to mangling and demangling this string from same config tree.
Ensure policy_name is always defined.
If running lvmconf ... --startstopservice --mirrorservice in systemd
environment, handle lvm2-cmirrord accordingly. A typo in the script
caused the lvm2-cmirrord to not start/stop immediately, it was
only enabled/disabled (so the --startstopservice was ignored in this
case).
Existing messaging intarface for thin-pool has a few 'weak' points:
* Message were posted with each 'resume' operation, thus not allowing
activation of thin-pool with the existing state.
* Acceleration skipped suspend step has not worked in cluster,
since clvmd resumes only nodes which are suspended (have proper lock
state).
* Resume may fail and code is not really designed to 'fail' in this
phase (generic rule here is resume DOES NOT fail unless something serious
is wrong and lvm2 tool usually doesn't handle recovery path in this case.)
* Full thin-pool suspend happened, when taken a thin-volume snapshot.
With this patch the new method relocates message passing into suspend
state.
This has a few drawbacks with current API, but overal it performs
better and gives are more posibilities to deal with errors.
Patch introduces a new logic for 'origin-only' suspend of thin-pool and
this also relates to thin-volume when taking snapshot.
When suspend_origin_only operation is invoked on a pool with
queued messages then only those messages are posted to thin-pool and
actual suspend of thin pool and data and metadata volume is skipped.
This makes taking a snapshot of thin-volume lighter operation and
avoids blocking of other unrelated active thin volumes.
Also fail now happens in 'suspend' state where the 'Fail' is more expected
and it is better handled through error paths.
Activation of thin-pool is now not sending any message and leaves upto a tool
to decided later how to finish unfinished double-commit transaction.
Problem which needs some API improvements relates to the lvm2 tree
construction. For the suspend tree we do not add target table line
into the tree, but only a device is inserted into a tree.
Current mechanism to attach messages for thin-pool requires the libdm
to know about thin-pool target, so lvm2 currently takes assumption, node
is really a thin-pool and fills in the table line for this node (which
should be ensured by the PRELOAD phase, but it's a misuse of internal API)
we would possibly need to be able to attach message to 'any' node.
Other thing to notice - current messaging interface in thin-pool
target requires to suspend thin volume origin first and then send
a create message, but this could not have any 'nice' solution on lvm2
side and IMHO we should introduce something like 'create_after_resume'
message.
Patch also changes the moment, where lvm2 transaction id is increased.
Now it happens only after successful finish of kernel transaction id
change. This change was needed to handle properly activation of pool,
which is in the middle of unfinished transaction, and also this corrects
usage of thin-pool by external apps like Docker.
Recognize date and time specification within selection criteria
that is formulated in a more free-form way besides to the original
basic YYYY-MM-DD HH:MM format that libdevmapper supports.
Currently, this free-form format is recognized for lv_time field.
Users are able to use expressions from this set:
- weekday names ("Sunday" - "Saturday" or abbreviated as "Sun" - "Sat")
- labels for points in time ("noon", "midnight")
- labels for a day relative to current day ("today", "yesterday")
- points back in time with relative offset from today (N is a number)
( "N" "seconds"/"minutes"/"hours"/"days"/"weeks"/"years" "ago")
( "N" "secs"/"mins"/"hrs" ... "ago")
( "N" "s"/"m"/"h" ... "ago")
- time specification either in hh:mm:ss format or with AM/PM suffixes
- month names ("January" - "December" or abbreviated as "Jan" - "Dec")
For example:
$ date
Fri Jul 3 10:11:13 CEST 2015
$ lvmconfig --type full report/time_format
time_format="%a %Y-%m-%d %T %z %Z [%s]"
$ lvs
LV VG Time
lvol0 vg Fri 2014-08-22 21:25:41 +0200 CEST [1408735541]
lvol2 vg Sun 2015-04-26 14:52:20 +0200 CEST [1430052740]
root fedora Wed 2015-05-27 08:09:21 +0200 CEST [1432706961]
swap fedora Wed 2015-05-27 08:09:21 +0200 CEST [1432706961]
lvol1 vg Tue 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 vg Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
lvol6 vg Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time=yesterday'
LV VG Time
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "June 30"'
LV VG Time
lvol1 vg Tue 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 vg Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
lvol6 vg Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "noon June 30"'
LV VG Time
lvol3 vg Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
lvol6 vg Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "2 July 9AM"'
LV VG Time
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "2 July 1PM"'
LV VG Time
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
...and so on.
dm_snprintf() returns upon success the number of characters printed
(excluding the null byte used to end output to strings).
So add extra byte to preserve \0.
This fixes regression when displaying more then a single lv name.
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).
For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
lvol1 vg -wi-a----- 4.00m 2015-06-29 09:17:11 +0200
(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m @1435241914
lvol1 vg -wi-a----- 4.00m @1435562231
Commit e587b0677b broke the build on
systems where /bin/sh is Dash, for example.
Origin patch by Ferenc Wágner <wferi@niif.hu> changed later to
avoid using shell call, so makefile add 'server' target when
one of metad or polld daemon is requested.
The lvmconfig --type full is actually a combination of --type current
and --type missing together with --mergedconfig options used.
The overall outcome is a configuration tree with settings as LVM sees
it when it looks for the values - that means, if the setting is defined
in some config source (lvm.conf, --config, lvmlocal.conf or any profile
that is used), the setting is used. Otherwise, if the setting is not
defined in any part of the config cascade, the defaults are used.
The --type full displays exactly this final tree with all the values
defined, either coming from configuration tree or from defaults.
Synchronize with udev logic before reusing device as snapshot.
This patch tries to fix the problem with udev, where we manage
to 'active' LV for clearing, then we deactivate such device and
active again as member of 'origin&snapshot' tree all in 1 step.
There needs to be a sync point where udev has time to remove all links,
otherwise we race with scans and we may end-up with mysterious 'free'
links in the system pointing to wrong dm names.
This patch tries to fix failing topology cluster tests..
We shouldn't be adding spaces by default in output as that
may be be used already in scripts and especially for the eval
in shell scripts where spaces are not allowed between key
and value!
Add --withspaces option to lvmconfig for pretty output with
more space in for readability.
Use of display_lvname() in plain log_debug() may accumulate memory in
command context mempool. Use instead small ringbuffer which allows to
store cuple (10 ATM) names so upto 10 full names can be used at one.
We are not keeping full VG/LV names as it may eventually consume larger
amount of RAM resouces if vgname is longer and lots of LVs are in use.
Note: if there would be ever needed for displaing more names at once,
the limit should be raised (e.g. log_debug() would need to print more
then 10 LVs on a single line).
With thin-pool kernel target module 1.13 it's now support usage of
external origin with sizes which are not 'alligned' with chunk size
of thin-pool.
Enable lvm2 support for this and also fix reporting of data_percent
usage for case sizes are not alligned.
Note that this is just a quick fix and it needs more robust fix to
encompass any combination, not just the (old) snapshot one!
This started with this report:
https://bugzilla.redhat.com/show_bug.cgi?id=1219222
If we have devices/ignore_suspended_devices=1 set based on which we
filter out suspended devices as unusable (or if we ignore suspended
devices by force, e.g. during lvconvert called from dmeventd) and
when we have snapshot and snapshot origin devices in the play, we
need to look at their components unerneath (*-real and *-cow) to
check if they're not suspended. If they are, the snapshot/snapshot
origin is not usable as well and hence it needs to be filtered out
by filter-usable.c code which does suspended device filtering.
Not going into much details here, more details are in the bugzilla
mentioned above. However, this is a quick fix since snapshot
and this exact situation is not the only one. So this is
something that needs to be revisited and fixed properly
with full dm tree and checking the whole stack to state
whether the device at the very top is usable or not.
This patch fixes segfault which was caused by incorrectly marking some
settings CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED - the
ones which have NULL default value, hence they're really undefined.
A regression caused by a98ceceb1d.
For example:
$ lvmconfig log/file
file="/a"
Before this patch:
$ lvmconfig --type diff
Segmentation fault (core dumped)
With this patch applied:
$ lvmconfig --type diff
log {
file="/a"
}
The same applies for these settings:
log/activate_file
global/library_dir
global/system_id_file
<disk_area>/disk_area_id
There were also other settings with NULL default value and marked as
CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED, but they were
cfg_array config settings where the NULL value was not causing segfault
(NULL == empty array).
Commit b00711e312 improperly
convert _area_missing() replacment and moved check for
AREA_PV seg_type() into same if() section.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
If lvmetad is not used, we generate lvm2-activation{-early,-net}.service
systemd services to activate any VGs found on the system. So far we used
--sysinit during this activation as polling was still forked off of the
lvm activation command.
This has changed with lvmpolld - we have proper lvmpolld systemd
service now (activated via its socket unit). As such, we don't need
to use --sysinit anymore during activation in systemd environment
as polling was the only barrier to remove the need for --sysinit.
as of now lvmpolld works as client utility for
querying running instance of lvmpolld server
on metadata, state, etc.
Currently the only request implemented is the '--dump'.
It prints out full lvmpolld state (mimics lvmdump -p command).
Configure provides proper settings for
use_lvmetad and use_lvmpolld conf setttings.
When the build of polld & lvmetad, these settings
are enabled by default unless explicitelly disabled
with --disable-use-lvmetad/--disable-use-lvmpolld.
Use 64bit arithmentic for PV size calculation (Coverity).
Also remove sector shift for compared PV size, since all
values are already held in sectors.
This fixes validatio of PV size when restoring PV
from vg metadata backup file.
Reinstate config settings matching the last release until every
case where the generator produces different output has been reviewed
and fresh decisions made about which defaults to expose as protection
against changes in newer releases. We should be trying to reduce, not
increase, this number.
This patch adds supporting code for handling deprecated settings.
Deprecated settings are not displayed by default in lvmconfig output
(except for --type current and --type diff). There's a new
"--showdeprecated" lvmconfig option to display them if needed.
Also, when using lvmconfig --withcomments, the comments with info
about deprecation are displayed for deprecated settings and with
lvmconfig --withversions, the version in which the setting was
deprecated is displayed in addition to the version of introduction.
If using --atversion with a version that is lower than the one
in which the setting was deprecated, the setting is then considered
as not deprecated (simply because at that version it was not
deprecated).
For example:
$ lvmconfig --type default activation
activation {
...
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated
activation {
...
mirror_region_size=512
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated --withversions
activation {
...
# Available since version 1.0.0.
# Deprecated since version 2.2.99.
mirror_region_size=512
# Available since version 2.2.99.
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated --withcomments
activation {
...
# Configuration option activation/mirror_region_size.
# This has been replaced by the activation/raid_region_size
# setting.
# Size (in KB) of each copy operation when mirroring.
# This configuration option is deprecated.
mirror_region_size=512
# Configuration option activation/raid_region_size.
# Size in KiB of each raid or mirror synchronization region.
# For raid or mirror segment types, this is the amount of
# data that is copied at once when initializing, or moved
# at once by pvmove.
raid_region_size=512
...
}
$ lvmconfig --type default activation --withcomments --atversion 2.2.98
activation {
...
# Configuration option activation/mirror_region_size.
# Size (in KB) of each copy operation when mirroring.
mirror_region_size=512
...
}
These settings are in the "unsupported" group:
devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
These settings are in the "advanced" group:
devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs
Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).
By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
lvmconfig --type list displays plain list of configuration settings.
Some of the existing decorations can be used (--withsummary and
--withversions) as well as existing options/switches (--ignoreadvanced,
--ignoreunsupported, --ignorelocal, --atversion).
For example (displaying only "config" section so the list is not long):
$lvmconfig --type list config
config/checks
config/abort_on_errors
config/profile_dir
$ lvmconfig --type list --withsummary config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.
$ lvmconfig -l config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.
$ lvmconfig --type list --withsummary --withversions config
config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99]
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99]
config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99]
Example with --atversion (displaying global section):
$ lvmconfig --type list global
global/umask
global/test
global/units
global/si_unit_consistency
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/etc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/prioritise_write_locks
global/library_dir
global/locking_library
global/abort_on_internal_errors
global/detect_internal_vg_cache_corruption
global/metadata_read_only
global/mirror_segtype_default
global/raid10_segtype_default
global/sparse_segtype_default
global/lvdisplay_shows_full_device_path
global/use_lvmetad
global/thin_check_executable
global/thin_dump_executable
global/thin_repair_executable
global/thin_check_options
global/thin_repair_options
global/thin_disabled_features
global/cache_check_executable
global/cache_dump_executable
global/cache_repair_executable
global/cache_check_options
global/cache_repair_options
global/system_id_source
global/system_id_file
$ lvmconfig --type list global --atversion 2.2.50
global/umask
global/test
global/units
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/library_dir
global/locking_library
'lvm dumpconfig' now does a lot more than just dumping configuration
information and is no longer only a support tool. Users now need
to run it to find out about configuration information that has been
removed from the lvm.conf man page so we need to promote this to full
command line status as 'lvmconfig'. Also accept 'lvm config' and mention
it in the usage information of lvmconf (which should also get merged in
eventually).
Show full chain of ancestors and descendants for snapshots
(both thick and thin - in case of thick, the "ancestor" field
is actually equal to "origin" field as snapshots can't be
chained for thick snapshots).
These fields display current state as it is, they do not
display any history! If the snapshot chain is broken in
the middle, we don't report the historical origin (this
is going to be a part of another patch and a different
set of fields or just a switch for existing fields to
show ancestors and descendants with history included).
For example:
(origin --> snapshot)
lvol1 --> lvol2 --> lvol3 --> lvol4
\
--> lvol5 --> lvol6 --> lvol7 --> lvol8
$ lvs -o name,pool_lv,origin,ancestors,descendants vg
LV Pool Origin Ancestors Descendants
lvol1 pool lvol2,lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol2 pool lvol1 lvol1 lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol3 pool lvol2 lvol2,lvol1 lvol4
lvol4 pool lvol3 lvol3,lvol2,lvol1
lvol5 pool lvol2 lvol2,lvol1 lvol6,lvol7,lvol8
lvol6 pool lvol5 lvol5,lvol2,lvol1 lvol7,lvol8
lvol7 pool lvol6 lvol6,lvol5,lvol2,lvol1 lvol8
lvol8 pool lvol7 lvol7,lvol6,lvol5,lvol2,lvol1
add info for various commits, most significant were:
- toollib: close connection to lvmetad after fork
(fe30658a4d)
- toollib: do not spawn polling in lv_change_activate
(c26d81d6e6)
- pvmove: split pvmove_update_metadata function
(65623b63a2)
- lvconvert: move poll code in before refactoring
(5190f56605)
- pvmove: move poll code in before refactoring
(a098aa419f)
--withfullcomments prints all comment lines for each config option.
--withcomments prints only the first comment line, which should be
a short one-line summary of the option.
This removes dependency on lvm binary - if it's not present, all LVM
processing is skipped (shouldn't normally happen because if lvm binary
is missing then there's obviously nothing that would activate it, but
let's make sure).
Without this tight dependency on lvm, the blkdeactivate script can
be packaged with libdevmapper/dmsetup (in contrast to lvm as it was
before) and as such the script can still be used to handle other DM
devices.
This patch adds new options to lvmconf:
--enable-halvm (just like --enable-cluster, but configure LVM
for use in HA LVM - meaning disabling lvmetad and
making sure we have locking_type=1)
--disable-halvm (just like --disable-cluster, but configure LVM
back from HA LVM - meaning enabling lvmetad if
it's enabled by default and making sure we have
default locking type set)
--services (causes clvmd and lvmetad services to be enabled or
disabled appropriately and conforming to the changes
in lvm configuration we've just made with lvmconf)
--mirrorservice (in addition to clvmd and lvmetad services, also
enable or disable cmirrord service appropriately;
this is a separate option because cmirrord is
optional and it doesn't need to be always enabled
when clvmd is enabled)
--startstopservices (in addition to enabling or disabling services,
start and stop these services immediately)
These options are supposed to help users to make their system ready
for cluster with clvmd (active-active) or HA LVM (active-passive) use
while lvmconf script can handle services as well so users don't need
to bother about setting them manually.
Also, before this patch, we hardcoded global/use_lvmetad=0 as default
value in lvmconf script. Howeverm this default may change by just
flipping the value in config_settings.h and we may forget to edit
the lvmconf. It's better to use lvm dumpconfig --type default global/use_lvmetad
to get the actual default value and use this one instead of hardcoded one.
When performing initial allocation (so there is nothing yet to
cling to), use the list of tags in allocation/cling_tag_list to
partition the PVs. We implement this by maintaining a list of
tags that have been "used up" as we proceed and ignoring further
devices that have a tag on the list.
https://bugzilla.redhat.com/983600
Add A_PARTITION_BY_TAGS set when allocated areas should not share tags
with each other and allow _match_pv_tags to accept an alternative list
of tags. (Not used yet.)
pv_write is called both to write orphans and to rewrite PV headers
of PVs in VGs. It needs to select the correct VG id so that the
internal cache state gets updated correctly.
It only affected commands that involved further steps after
the pv_write and was often masked because the metadata would
be re-read off disk and correct itself.
"Incorrect metadata area header checksum" warnings appeared.
Example:
Create vg1 containing dev1, dev2 and dev3.
Hide dev1 and dev2 from the system.
Fix up vg1 with vgreduce --removemissing.
Bring back dev1 and dev2.
In a single operation reinstate dev1 and dev2 into vg1 (vgextend).
Done as separate operations (automatically fix-up dev1 and dev2 as orphans,
then vgextend) it worked, but done all in one go the internal cache got
corrupted and warnings about checksum errors appeared.
There is no benefit in waking-up all the waiters
when there is no actual change in lock state.
This avoid some unnecessarily ping-pong effects like:
Resource V_LVMTEST15724vg retrying lock in mode:WRITE...
Resource V_LVMTEST15724vg already locked lockid=40, mode:WRITE
Resource V_LVMTEST15724vg retrying lock in mode:WRITE...
Resource V_LVMTEST15724vg already locked lockid=40, mode:WRITE
Commit 80f4b4b803
introduced undesirable side-effects for lvm2app user
which happens to be our own python binding.
It appear obtaing pvs list keeps global lock.
So restricting this to VG_GLOBAL READ locks and skip
the drop skip if WRITE lock is held.
This avoids a problem in which we're using selection on LV list - we
need to do the selection on initial state and not on any intermediary
state as we process LVs one by one - some of the relations among LVs
can be gone during this processing.
For example, processing one LV can cause the other LVs to lose the
relation to this LV and hence they're not selectable anymore with
the original selection criteria as it would be if we did selection
on inital state. A perfect example is with thin snapshots:
$ lvs -o lv_name,origin,layout,role vg
LV Origin Layout Role
lvol1 thin,sparse public,origin,thinorigin,multithinorigin
lvol2 lvol1 thin,sparse public,snapshot,thinsnapshot
lvol3 lvol1 thin,sparse public,snapshot,thinsnapshot
pool thin,pool private
$ lvremove -ff -S 'lv_name=lvol1 || origin=lvol1'
Logical volume "lvol1" successfully removed
The lvremove command above was supposed to remove lvol1 as well as
all its snapshots which have origin=lvol1. It failed to do so, because
once we removed the origin lvol1, the lvol2 and lvol3 which were
snapshots before are not snapshots anymore - the relations change
as we're processing these LVs one by one.
If we do the selection first and then execute any concrete actions on
these LVs (which is what this patch does), the behaviour is correct
then - the selection is done on the *initial state*:
$ lvremove -ff -S 'lv_name=lvol1 || origin=lvol1'
Logical volume "lvol1" successfully removed
Logical volume "lvol2" successfully removed
Logical volume "lvol3" successfully removed
Similarly for all the other situations in which relations among
LVs are being changed by processing the LVs one by one.
This patch also introduces LV_REMOVED internal LV status flag
to mark removed LVs so they're not processed further when we
iterate over collected list of LVs to be processed.
Previously, when we iterated directly over vg->lvs list to
process the LVs, we relied on the fact that once the LV is removed,
it is also removed from the vg->lvs list we're iterating over.
But that was incorrect as we shouldn't remove LVs from the list
during one iteration while we're iterating over that exact list
(dm_list_iterate_items safe can handle only one removal at
one iteration anyway, so it can't be used here).
Refactor the recent metadata-reading optimisation patches.
Remove the recently-added cache fields from struct labeller
and struct format_instance.
Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.
Allow this VG summary information to be looked up by metadata size +
checksum. Adjust the debug log messages to make it clear when this
shortcut has been successful.
(This changes the optimisation slightly, and might be extendable
further.)
Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
Fixes segfault when 'pvs' encounters two different PVs sharing the same
uuid but one an orphan, the other in a VG.
If VG_GLOBAL is held, there seems no point in doing a full scan more
than once.
If undesirable side-effects show up, we can try restricting this to
VG_GLOBAL READ locks. The original code dates back to 2.02.40.
When pvscan --cache --major --minor command is issued from
udev REMOVE event, it basically resulted into a whole device
scan since the device was missing. So avoid such scan
and first check via /sysfs (when available) if such device actually
exists.
There is no reason to support persistent major/minor numbers
for pool volumes - it's only meant to be supported for filesystems
(since i.e. nfs may need to keep volume on a persistent device node.)
Support for pools is now explicitely disabled and documented.
Metadata areas which are marked as ignored should not be scanned
and read during pvscan --cache. Otherwise, this can cause lvmetad
to cache out-of-date metadata in case other PVs with fresh metadata
are missing by chance.
Make this to work like in non-lvmetad case where the behaviour would
be the same as if the PV was orphan (in case we have no other PVs
with valid non-ignored metadata areas).
The iscsi-shutdown.service is the one responsible for logging out
iscsi sessions so blk-availability.service (running the blkdeactivate
script) should be run before that on shutdown (so we need to use
After=iscsi-shutdown.service because "After" relates to starting
the service and the opposite order is automatically applied on
stopping the service at shutdown).
Since we take a lock inside vg_lock_newname() and we do a full
detection of presence of vgname inside all scanned labels,
there is no point to do this for second time to be sure
there is no such vg.
The only side-effect of such call would be a full validation of
some already exising VG metadata - but that's not the task for
vgcreate when create a new VG.
This call noticable reduces number of scans during 'vgcreate'.
Use similar logic as with text_vg_import_fd() and avoid repeated
parsing of same mda and its config tree for vgname_from_mda().
Remember last parsed vgname, vgid and creation_host in labeller
structure and if the metadata have the same size and checksum,
return this stored info.
TODO: The reuse of labeller struct is not ideal, some lvmcache API for
this functionality would be nicer.
When reading VG mda from multiple PVs - do all the validation only
when mda is seen for the first time and when mda checksum and length
is same just return already existing VG pointer.
(i.e. using 300PVs for a VG would lead to create and destroy 300 config trees....)
The seg_monitor did not display monitored status for thick snapshots
and mirrors (with mirror log *not* mirrored). The seg monitor did work
correctly even before for other segtypes - thins and raids.
Before (mirrors and snapshots, only mirrors with mirrored log properly displayed monitoring status):
[0] f21/~ # lvs -a -o lv_name,lv_layout,lv_role,seg_monitor vg
LV Layout Role Monitor
mirror mirror public
[mirror_mimage_0] linear private,mirror,image
[mirror_mimage_1] linear private,mirror,image
[mirror_mlog] linear private,mirror,log
mirror_with_mirror_log mirror public monitored
[mirror_with_mirror_log_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mimage_1] linear private,mirror,image
[mirror_with_mirror_log_mlog] mirror private,mirror,log monitored
[mirror_with_mirror_log_mlog_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mlog_mimage_1] linear private,mirror,image
thick_origin linear public,origin,thickorigin
thick_snapshot linear public,snapshot,thicksnapshot
With this patch applied (monitoring status displayed for all mirrors and snapshots):
[0] f21/~ # lvs -a -o lv_name,lv_layout,lv_role,seg_monitor vg
LV Layout Role Monitor
mirror mirror public monitored
[mirror_mimage_0] linear private,mirror,image
[mirror_mimage_1] linear private,mirror,image
[mirror_mlog] linear private,mirror,log
mirror_with_mirror_log mirror public monitored
[mirror_with_mirror_log_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mimage_1] linear private,mirror,image
[mirror_with_mirror_log_mlog] mirror private,mirror,log monitored
[mirror_with_mirror_log_mlog_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mlog_mimage_1] linear private,mirror,image
thick_origin linear public,origin,thickorigin
thick_snapshot linear public,snapshot,thicksnapshot monitored
Set ACCESS_NEEDS_SYSTEM_ID VG status flag whenever there is
a non-lvm1 system_id set. Prevents concurrent access from
older LVM2 versions.
Not set on VGs that bear a system_id only due to conversion
from lvm1 metadata.
format_text processes both lvm2 on-disk metadata and metadata read
from other sources such as backup files. Add original_fmt field
to retain the format type of the original metadata.
Before this patch, /etc/lvm/archives would contain backups of
lvm1 metadata with format = "lvm2" unless the source was lvm1 on-disk
metadata.
Two new functions added in the init script: rh_status and rh_status_q.
First one to be used in status() and second one to be used in start(),
stop(), force_stop(). Check for 'dmeventd' added and print list of
lvs being monitored in status().
Two problems fixed by this patch:
- PV tags were not recognized at all when using them with pvs
report that has only label fields (regression since 2.02.105)
- incorrect persistent .cache file to be generated after pvs
report that has only label fields (regression since 2.02.106)
These bugs come from the transition from process_each_pv to
process_each_label introduced by commit
67a7b7a87d and commit
490226fc47 and related.
cmirror uses the CPG library to pass messages around the cluster and maintain
its bitmaps. When a cluster mirror starts-up, it must send the current state
to any joining members - a checkpoint. When mirrors are large (or the region
size is small), the bitmap size can exceed the message limit of the CPG
library. When this happens, the CPG library returns CPG_ERR_TRY_AGAIN.
(This is also a bug in CPG, since the message will never be successfully sent.)
There is an outstanding bug (bug 682771) that is meant to lift this message
length restriction in CPG, but for now we work around the issue by increasing
the mirror region size. This limits the size of the bitmap and avoids any
issues we would otherwise have around checkpointing.
Since this issue only affects cluster mirrors, the region size adjustments
are only made on cluster mirrors. This patch handles cluster mirror issues
involving pvmove, lvconvert (from linear to mirror), and lvcreate. It also
ensures that when users convert a VG from single-machine to clustered, any
mirrors with too many regions (i.e. a bitmap that would be too large to
properly checkpoint) are trapped.
Add --foreign to the remaining reporting and display commands plus
vgcfgbackup.
Add a NEEDS_FOREIGN_VGS flag for vgimport to always set --foreign.
If lvmetad is being used with --foreign, scan foreign VGs (currently
implemented as a full PV scan).
Handle these things centrally in lvmcmdline.c.
Also allow lvchange and vgchange -an/-aln to deactivate any foreign
LVs that happen to be active if something went wrong.
Remember to set the system ID when creating a new VG in vgsplit.
Move the lvm1 sys ID into vg->lvm1_system_id and reenable the #if 0
LVM1 code. Still display the new-style system ID in the same
reporting field, though, as only one can be set.
Add a format feature flag FMT_SYSTEM_ON_PVS for LVM1 and disallow
access to LVM1 VGs if a new-style system ID has been set.
Treat the new vg->system_id as const.
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it. "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
Before, we refreshed filters and we did full rescan of devices if
we passed through wiping (wipe_known_signatures fn call). However,
this fn returns success even if no signatures were found and so
nothing was wiped. In this case, it's not necessary to do the
filter refresh/rescan of devices as nothing changed clearly.
This patch exports number of wiped signatures from all the
wiping functions below. The caller (_pvcreate_check) then checks
whether any wiping was done at all and if not, no refresh/rescan
is done, saving some time and resources.
pvcreate code path executes signature wiping if there are any signatures
found on device to prepare the device for PV. When the signature is wiped,
the WATCH udev rule triggers the event which then updates udev database
with fresh info, clearing the old record about previous signature.
However, when we're using udev db as dev-ext source, we'd need to wait
for this WATCH-triggered event. But we can't synchronize against such
events (at least not at this moment). Without this sync, if the code
continues, the device could still be marked as containing the old
signature if reading udev db. This may end up even with the device
to be still filtered, though the signature is already wiped.
This problem is then exposed as (an example with md components):
$ mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda /dev/sdb --run
$ mdadm -S /dev/md0
$ pvcreate -y /dev/sda
Wiping linux_raid_member signature on /dev/sda.
/dev/sda: Couldn't find device. Check your filters?
$ echo $?
5
So we need to temporarily switch off "udev" dev-ext source here
in this part of pvcreate code until we find a way how to sync
with WATCH events.
(This problem does not occur with signature wiping which we do
on newly created LVs since we already handle this properly with
our udev flags - the LV_NOSCAN/LV_TEMPORARY flag. But we can't use
this technique for non-dm devices to keep WATCH rule under control.)
Invalid devices no longer included in the counters printed at the end.
May now need to use --ignoreskippedcluster if relying upon exit status.
If more than one change is requested per-PV, attempt to perform them
all. Note that different arguments still handle exit status
differently.
When lvmetad is used and at the same time we're getting list of all
PV-capable devices, we can't use cmd->filter (which is used to filter
out lvmetad responses - so we're sure that the devices are PVs already).
To get the list of PV-capable devices, we're bypassing lvmetad (since
lvmetad only caches PVs, not all the other devices which are not PVs).
For this reason, we have to use the "full_filter" filter chain (just
like we do when we're running without lvmetad).
Example scenario:
- sdo and sdp components of MD device md0
- sdq, sdr and sds components of mpatha multipath device
- mpatha multipath device partitioned
- vda device partitioned
=> sdo,sdp,sdr,sds, mpatha and vda should be filtered!
$ lsblk -o NAME,TYPE
NAME TYPE
sdn disk
sdo disk
`-md0 raid0
sdp disk
`-md0 raid0
sdq disk
`-mpatha mpath
`-mpatha1 part
sdr disk
`-mpatha mpath
`-mpatha1 part
sds disk
`-mpatha mpath
`-mpatha1 part
vda disk
|-vda1 part
`-vda2 part
|-fedora-swap lvm
`-fedora-root lvm
Before this patch:
==================
use_lvmetad=0 (correct behaviour!)
$ pvs -a
PV VG Fmt Attr PSize PFree
/dev/fedora/root --- 0 0
/dev/fedora/swap --- 0 0
/dev/mapper/mpatha1 --- 0 0
/dev/md0 --- 0 0
/dev/sdn --- 0 0
/dev/vda1 --- 0 0
/dev/vda2 fedora lvm2 a-- 9.51g 0
use_lvmetad=1 (incorrect behaviour - sdo,sdp,sdq,sdr,sds and mpatha not filtered!)
$ pvs -a
PV VG Fmt Attr PSize PFree
/dev/fedora/root --- 0 0
/dev/fedora/swap --- 0 0
/dev/mapper/mpatha --- 0 0
/dev/mapper/mpatha1 --- 0 0
/dev/md0 --- 0 0
/dev/sdn --- 0 0
/dev/sdo --- 0 0
/dev/sdp --- 0 0
/dev/sdq --- 0 0
/dev/sdr --- 0 0
/dev/sds --- 0 0
/dev/vda --- 0 0
/dev/vda1 --- 0 0
/dev/vda2 fedora lvm2 a-- 9.51g 0
With this patch applied:
========================
use_lvmetad=1
$ pvs -a
PV VG Fmt Attr PSize PFree
/dev/fedora/root --- 0 0
/dev/fedora/swap --- 0 0
/dev/mapper/mpatha1 --- 0 0
/dev/md0 --- 0 0
/dev/sdn --- 0 0
/dev/vda1 --- 0 0
/dev/vda2 fedora lvm2 a-- 9.51g 0
This makes a difference when using selection criteria based on
these fields - if those fields are defined as DM_REPORT_FIELD_TYPE_SIZE
(in contrast to DM_REPORT_FIELD_TYPE_NUMBER), units are also
recognize in selection clause.
For example:
$ lvs -o+seg_start vg1/lv2
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 0
lv2 vg1 -wi-a----- 12.00m 8.00m
Before this patch:
$ lvs -o+seg_start --select 'seg_start=8m'
Found size unit specifier but numeric value expected for selection field seg_start.
Selection syntax error at 'seg_start=8m'.
Use 'help' for selection to get more help.
With this patch applied:
$lvs -o+seg_start --select 'seg_start=8m'
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 8.00m
(the same applies for ba_start and vg_free fields)
We already allowed -S|--select with {vg,lv,pv}display -C (which
was then equal to {vg,lv,pv}s command. Since we support selection
in toolib now, we can support -S also without using -C in *display
commands now.
We have 3 input report types:
- LVS (representing "_select_match_lv")
- VGS (representing "_select_match_vg")
- PVS (representing "_select_match_pv")
The input report type is saved in struct selection_handle's "orig_report_type"
variable.
However, users can use any combination of fields of different report types in
selection criteria - the resulting report type can thus differ. The struct
selection_handle's "report_type" variable stores this resulting report type.
The resulting report_type can end up as one of:
- LVS
- VGS
- PVS
- SEGS
- PVSEGS
This patch adds logic to report_for_selection based on (sensible) combination
of orig_report_type and report_type and calls appropriate reporting functions
or iterates over multiple items that need reporting to determine the selection
result.
Once LVM_COMMAND_PROFILE environment variable is specified, the profile
referenced is used just like it was specified using "<lvm command> --commandprofile".
If both --commandprofile cmd line option and LVM_COMMAND_PROFILE env
var is used, the --commandprofile cmd line option gets preference.
all sockets opened by a daemon or handed over by systemd
have to have CLOEXEC flag set. Otherwise we get nasty
warnings about leaking descriptors in processes spawned by
daemon.
for_each_sub_lv() now scans in depth also pools, however for
rename we actually do want to skip pools.
So add a new for_each_sub_lv_except_pools() to be used by rename,
every other user of for_each_sub_lv() scans every sub LV with pools
included.
This is i.e. necessary for properly working preload of pools
that are using raid arrays.
This is a regression from v115 where some of the fields/properties
were converted to using the common "struct lvinfo" and
"struct lv_seg_status" so we don't need to issue info and status
ioctl several times per one reported line. Not all fields are
converted yet, but one that *is* converted is the lv_attr field
with the lv_attr_dup counterpart used in lvm_lv_get_attr lvm2app fn.
These changes were introduced with e34b004422
and later - this patch introduced the "info_ok" field in the
lv_with_info_and_seg_status structure which encapsulates the lvinfo
and lv_seg_status struct.
For the lv_attr_dup, the lv_attr_dup code missed the
assignment for the "info_ok" flag which saves the result of the
lv_info_with_seg_status call. Hence such info was marked
as unusable - unknown and it was returned as such via lvm_lv_get_attr
lvm2app fn.
When cache_mode is undefined, the read of metadata will miss to
set a bit with mode and fails to process metadata on internal
error:
Internal error: LV vg/lvol1 has uknown feature flags 0.
Fix it by setting it to writethrough mode.
When repairing thin pool or swapping thin pool metadata,
preserve chunk_size property and avoid to be automatically changed
later in the code to better match thin pool metadata size.
When raid leg is extracted, now the preload code handles this state
correctly and put proper new table entry into dm tree,
so the activation of extracted leg and removed metadata works
after commit.
When raid is being splitted, extracted leg & metadata
is still floating in the table - and thus we need to
detect this case and properly preload their matching
table so consequent activation of extracted LVs properly
renames (and FREES) existing raid images, so ongoing
image name shifting will work.
For example, with dmeventd/executable set to "" which is not allowed for
this setting, the config validation now ends up with:
$ lvm dumpconfig --validate
Configuration setting "dmeventd/executable" invalid. It cannot be set to an empty value.
LVM configuration invalid.
This check for empty values for string config settings was not
done before (we only checked empty arrays, but not scalar strings).
Rename original lv_error_when_full field to lv_when_full and also
convert it from binary field to string field displaying three
possible values: "error", "queueu" or "" (blank for undefined).
$ lvs vg/pool vg/pool1 vg/linear_lv -o+lv_when_full
LV VG Attr LSize Data% Meta% WhenFull
linear_lv vg -wi-a----- 4.00m
pool vg twi-aotz-- 4.00m 0.00 0.98 queue
pool1 vg twi-a-tz-- 4.00m 0.00 0.88 error
For -S|--select these synonyms are recognized:
"error" -> "error when full", "error if no space"
"queue" -> "queue when full", "queue if no space"
"" -> "undefined"
Support error_if_no_space feature for thin pools.
Report more info about thinpool status:
(out_of_data (D), metadata_read_only (M), failed (F) also as health
attribute.)
An 'lvconvert --repair $RAID_LV" to replace a failed leg of a multi-segment
RAID10/4/5/6 logical volume can lead to allocation of (parts of) the replacement
image component pair on the physical volume of another image component
(e.g. image 0 allocated on the same PV as image 1 silently impeding resilience).
Patch fixes this severe resilince issue by prohibiting allocation on PVs
already holding other legs of the RAID set. It allows to allocate free space
on any operational PV already holding parts of the image component pair.
Normally, if there are partitions defined on top of device-mapper
device, there should be a device-mapper device created for each
partiton on top of the old one and once the underlying DM device
is used by another devices (partition mappings in this case),
it can't be used as a PV anymore.
However, sometimes, it may happen the partition mappings are
missing - either the partitioning tool is not creating them if
it does not contain full support for device-mapper devices or
the mappings were removed.
Better safe than sorry - check for partition header on DM devs
and filter them out as unsuitable for PVs in case the check is
positive. Whatever the user is doing, let's do our best to prevent
unwanted corruption (...by running pvcreate on top of such device
that would corrupt the partition header).
If pvscan is run with device path instead of major:minor pair and this
device still exists in the system and the device is not visible anymore
(due to a filter that is applied), notify lvmetad properly about this.
This makes it more consistent with respect to existing pvscan with
major:minor which already notifies lvmetad about device that is gone
due to filters.
However, if the device is not in the system anymore, we're not able
to translate the original device path into major:minor pair which
lvmetad needs for its action (lvmetad_pv_gone fn). So in this case,
we still need to use major:minor pair only, not device path. But at
least make "pvscan --cache DevicePath" as near as possible to "pvscan
--cahce <major>:<minor>" functionality.
Also add a note to pvscan man page about this difference when using
pvscan --cache with DevicePath and major:minor pair.
No need to use awk now to get appropriate VGs/LVs, use LVM's
own --select - it's quicker, it removes a need for external
dependency on awk and it's also more readable.
When creating/activating clustered mirrors, we should have cmirrord
available and running. If it's not, we ended up with rather cryptic
errors like:
$ lvcreate -l1 -m1 --type mirror vg
Error locking on node 1: device-mapper: reload ioctl on failed: Invalid argument
Failed to activate new LV.
$ vgchange -ay vg
Error locking on node node 1: device-mapper: reload ioctl on failed: Invalid argument
This patch adds check for cmirror availability and it errors out
properly, also giving a more precise error messge so users are able
to identify the source of the problem easily:
$ lvcreate -l1 -m1 --type mirror vg
Shared cluster mirrors are not available.
$ vgchange -ay vg
Error locking on node 1: Shared cluster mirrors are not available.
Exclusively activated cluster mirror LVs are OK even without cmirrord:
$ vgchange -aey vg
1 logical volume(s) in volume group "vg" now active
The {pv,vg,lv}display *do* use reporting in case "-C|--columns" is used.
The man page was correct, the recognition for the --binary was missing
in the code though!
All the LVM commands are run in mode without lvmetad use (since lvmetad
can't handle duplicates). When we're finished with vgimportclone, we
need to notify lvmetad about changes.
Before this patch (/dev/sda and /dev/sdb contains a copy VG called "vg"):
$ vgimportclone --basevgname vg_snap /dev/sdb
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: Activation disabled. No device-mapper interaction will be attempted.
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Physical volume "/tmp/snap.zcJ8LCmj/vgimport0" changed 1 physical volume changed / 0 physical volumes not changed
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: Activation disabled. No device-mapper interaction will be attempted.
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Volume group "vg" successfully changed
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Volume group "vg" successfully renamed to "vg_snap"
Reading all physical volumes. This may take a while...
Found volume group "vg" using metadata type lvm2
Found volume group "fedora" using metadata type lvm2
$ vgs
VG #PV #LV #SN Attr VSize VFree
fedora 1 2 0 wz--n- 9.50g 0
vg 1 1 0 wz--n- 124.00m 120.00m
(...lvmetad doesn't see the new "vg_snap"!)
With this patch applied:
$ vgimportclone --basevgname vg_snap /dev/sdb
...
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Volume group "vg" successfully renamed to "vg_snap"
Notifying lvmetad about changes since it was disabled temporarily.
Reading all physical volumes. This may take a while...
Found volume group "vg_snap" using metadata type lvm2
Found volume group "fedora" using metadata type lvm2
Found volume group "vg" using metadata type lvm2
$ vgs
VG #PV #LV #SN Attr VSize VFree
fedora 1 2 0 wz--n- 9.50g 0
vg 1 1 0 wz--n- 124.00m 120.00m
vg_snap 1 1 0 wz--n- 124.00m 120.00m
The "restart lvmetad before enabling it" message is a bit misleading
here - we should probably suppress this one, but we can't suppress
warning messages selectively at the moment and we don't want to lose
other warning/error messages printed...
With current dumpconfig, we can generate lvm.conf easily - we can merge
current lvm.conf with the config given on cmd line:
lvm dumpconfig --mergedconfig --config "..."
This is a bit simpler than using awk and it also avoids problems when some of
the configuration is missing in existing lvm.conf file and hardcoded defaults
are used instead. The dumpconfig handles this transparently.
Under certain circumstances, the selection code can segfault:
$ vgs --select 'pv_name=~/dev/sda' --unbuffered vg0
VG #PV #LV #SN Attr VSize VFree
vg0 6 3 0 wz--n- 744.00m 588.00m
Segmentation fault (core dumped)
The problem here is the use of --ubuffered together with regex used in
selection criteria. If the report output is not buffered, each row is
discarded as soon as it is reported. The bug is in the use of report
handle's memory - in the example above, what happens is:
1) report handle is initialized together with its memory pool
2) selection tree is initialized from selection criteria string
(using the report handle's memory pool!)
2a) this also means the regex is initialized from report handle's mem pool
3) the object (row) is reported
3a) any memory needed for output is intialized out of report handle's mem pool
3b) selection criteria matching is executed - if the regex is checked the
very first time (for the very first row reported), some more memory
allocation happens as regex allocates internal structures "on-demand",
it's allocating from report handle's mem pool (see also step 2a)
4) the report output is executed
5) the object (row) is discarded, meaning discarding all the mem pool
memory used since step 3.
Now, with step 5) we have discarded the regex internal structures from step 3b.
When we execute reporting for another object (row), we're using the same
selection criteria (step 3b), but tihs is second time we're using the regex
and as such, it's already initialized completely. But the regex is missing the
internal structures now as they got discarded in step 5) from previous
object (row) reporting (because we're using "unbuffered" reporting).
To resolve this issue and to prevent any similar future issues where each
object/row memory is discarded after output (the unbuffered reporting) while
selection tree is global for all the object/rows, use separate memory pool
for report's selection.
This patch replaces "struct selection_node *selection_root" in struct
dm_report with new struct selection which contains both "selection_root"
and "mem" for separate mem pool used for selection.
We can change struct dm_report this way as it is not exposed via libdevmapper.
(This patch will have even more meaning for upcoming patches where selection
is used even for non-reporting commands where "internal" reporting and
selection criteria matching happens and where the internal reporting is
not buffered.)
Fix incorrect test in configure which sets --enable-udev-systemd-background-jobs
automatically if proper systemd version is available.
The UDEV_SYSTEMD_BACKGROUND_JOBS variable was not properly set to "yes" in
case systemd is available and we had "maybe" for this variable before.
When we split leg from raid - we take a proper new lock for a new LV.
However for now activation checks only 'existince' of device UUID,
but it's not validating device has a proper name.
As a quick fix call suspend()/resume() to rename after split mirror.
Free (and clear) h.protocol string on daemon_open() error paths
so it's OK for caller to skip calling daemon_close() if returned
h.socket_fd is -1.
Close h.socket_fd in daemon_close() to avoid possible leak.
https://bugzilla.redhat.com/1164234
When chunk size needs to be estimated, the code missed to round
to proper 64kb boundaries (or power of 2 for older thin pool driver).
So for some data and metadata size (i.e. 10GB and 4MB) it resulted
in incorrect chunk size (not being a multiple of 64KB)
Fix it by adding proper rounding and also use 1 routine for 2 places
where the same calculation is made.
Fix also incorrect printed warning that has used 'ffs()'
(which returns first 'least significant' bit in word)
and it was not really giving any useful size info and replace it
with properly estimated chunk size.
Fix regression introduced with a2c1024f6a
_setup_task(mknodes ? name : NULL...
has been replaced with:
_setup_task(type != MKNODES ? name : NULL....
Use '=='
Commit d2c116058e introduced regression
with CLVMD_PATH.
+ CLVMD_PATH="$clvmd_prefix/sbin/clvmd"
test "$prefix" != NONE && clvmd_prefix=$prefix
It has set CLVMD_PATH before clvmd_prefix got its final value.
Move it one line below.
systemd-run is available in systemd>=205. Also, this fix prevents
systemd-specific udev rules in 69-dm-lvm-metad.rules to appear in
case systemd environment is not available - make configure to check
this automatically and use these systemd specific rules only if it
is applicable.
Rework ignore_vg() API so it properly handles
multiple kind of vg_read_error() states.
Skip processing only otherwise valid VG.
Always return ECMD_FAILED when break is detected.
Check sigint_caught() in front of dm iterator loop.
Add stack for _process failing ret codes.
Failed recovery provides different (NULL) VG then FAILED_INCONSISTENT.
Mark it with different failure bit - since FAILED_INCONSISTENT is
supposed to contain something 'usable' (thought inconsistent).
More efficient spare volume creation. Save 1 extra commit
and properly activate this volume according to our cluster
activation rules (using lv_active_change() for this).
Since we 'layer' for cache origin which and we support dropping
cache layer - we need to restore origin name in case
the origin LV is more complex target - i.e. raid.
Drop _corig from name
Cleanup and rename parent -> parent_lv.
When deactivating origin, we may have possibly left table in broken state,
where origin is not active, but snapshot volume is still present.
Let's ensure deactivation of origin detects also all associated
snapshots are inactive - otherwise do not skip deactivation.
(so i.e. 'vgchange -an' would detect errors)
When responding to DM_EVENT_CMD_GET_REGISTERED_DEVICE no longer
ignore threads that have already been unregistered but which
are still present.
This means the caller can unregister a device and poll dmeventd
to ensure the monitoring thread has gone away before removing
the device. If a device was registered and unregistered in quick
succession and then removed, WAITEVENT could run in parallel with
the REMOVE.
Threads are moved to the _thread_registry_unused list when they
are unregistered.
Call check_new_thin_pool() to detect in-use thin-pool.
Save extra reactivation of thin-pool when thin pool is not active.
(it's now a bit more expensive to invoke thin_check for new pools.)
For new pools:
We now active locally exclusively thin-pool as 'public' LV.
Validate transaction_id is till 0.
Deactive.
Prepare create message for thin-pool and exclusively active pool.
Active new thin LV.
And deactivate thin pool if it used to be inactive.
Show some stats with 'lvs'
Display same info for active cache volume and cache-pool.
data% - #used cache blocks/#total cache blocks
meta% - #used metadata blocks/#total metadata blocks
copy% - #dirty/#used cache blocks
TODO: maybe there is a better mapping
- should be seen as first-try-and-see.
New size_mb_arg_with_percent is able to read size_mb_arg
but also it's able to read % values.
Percent parsing is share with int_arg_with_sign_and_percent.
If root has locales with different decimal point then '.'
(i.e. Czech with ',') lets be tolerant and retry with
"C" locales in the case '.' is found during parse of number.
Locales are then restored back.
Support compile type configurable defaults for creation
of sparse volumes.
By default now create 'thin-pools' for sparse volumes.
Use the global/sparse_segtype_default to switch back to old
snapshots if needed.
Apply the same compile logic for newly introduces mirror/raid1 options.
Use segment flags to avoid zeroing of cache, cache pool
snapshot and thin pool segments.
We never want to zero these segment types.
Note:
Snapshot COW and Cache origin are created as stripes
thus are then properly zeroed.
Let the finaly state of zero & wipe_signature to be
resolved later together with all the types.
Don't play with zero assigment and segtype flag
(i.e. thin-pool -Z has different meaning).
Check if the passed options do allow requested zeroing/wiping.
lvcreate without -Z or -W will fallback to warning if the device
cannot be zeroed, however if user requested them explicitely
it will give user error.
Refactor lvcreate code.
Prefer to use arg_outside_list_is_set() so we get automatic 'white-list'
validation of supported options with different segment types.
Drop used lp->cache, lp->cache and use seg_is_cache(), seg_is_thin()
Draw clear border where is the last moment we could change create
segment type.
When segment type is given with --type - do not allow it to be changed
later.
Put together tests related to individual segment types.
Finish cache conversion at proper part of lv_manip code after
the vg_metadata are written - so we could correcly clean-up created
stripe LV for cache volume.
We want to print smarter warning message only when
the zeroing was not provided on the first zeroable segment
of newly created LV.
Put warning within _should_wipe_lv function to avoid reevaluation
of same conditions twice.
Hide creation of temporary LVs and print them only in verbose mode.
e.g. hides confusing message about creation of _pmspare
device during creation of pool.
Ask for lock the proper LV.
Use the top-most LV to query for locally exclusive lock.
The rest of operations are then using 'lv_info()'
TODO:
Check all devices are reloaded from proper level.
In general any query on lv_is_active is supposed to be running
ona lv_lock_holder() volume.
Instead of segtype->ops->name() introduce lvseg_name().
This also allows us to leave name() function 'empty' for default
return of segtype->name.
TODO: add functions for rest of ops->
There was a bug in value and their synonym definition for these two fields
causing selections on these fields to not work correctly - nothing matched
against vg/lv_permissions fields even if selection criteria should have
matched.
Scenario:
$ lvs -o name,lv_permissions vg
LV LPerms
lvol0 read-only
lvol1 writeable
Before this patch:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
(blank)
$ lvs -o name,lv_permissions vg -S 'permissions=writeable
(blank)
With this patch applied:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
LV LPerms
lvol0 read-only
$ lvs -o name,lv_permissions vg -S 'permissions=writeable'
LV LPerms
lvol1 writeable
Also synonyms match correctly now:
$ lvs -o name,lv_permissions vg -S 'permissions=rw'
LV LPerms
lvol1 writeable
Fix lvm_split that is called when cmd line string is separated into
argv fields to recognize quote chars ('\'" and '"') properly and
when these quotes are used, consider the text within quotes as one
argument, do not separate it based on space characters inside.
The lvm_split is used during processing lvm shell command line or
when calling lvm commands through cmdlib (e.g. dmeventd plugins).
For example, the lvm shell scenario:
Before this patch:
$lvm
lvm> lvs --config 'global{ suffix=0 }'
Parse error at byte 9 (line 1): unexpected token
Failed to set overridden configuration entries.
With this patch applied:
$lvm
lvm> lvs --config 'global{ suffix=0 }'
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
root fedora -wi-ao---- 9.00g
swap fedora -wi-ao---- 512.00m
(Exactly the same problem is hit when calling LVM commands with
quoted arguments via lvm2cmd lib in dmeventd plugins.)
Bug https://bugzilla.redhat.com/show_bug.cgi?id=843587 is handled better
now - the hang does not occur anymore. There are still error messages
issued though during shutdown if someone stops lvm2-lvmetad.service
manually that lvm2-monitor.service depends on (even during shutdown).
These errors are correct though and will point to incorrect
configuration (still having use_lvmetad=1 in lvm.conf and stopping
lvm2-lvmetad.service manually).
The workaround to prevent the hang is not needed now. So the
'--config "global{use_lvmetad=0}"' is now removed from the
lvm2-monitor.service's ExecStop line.
Introduce pool function for validation of chunk size.
It's good idea to be able to reject invalid chunk size
when entered on command line before we open VG.
Move code to better locations.
Improve test and remove invalid ones
(i.e. no reason to require cache size to be >= then origin).
Correctly comment where the code is doing actual conversion
of other existing volume - we do already a similar thing with
external origins.
Lots of new command line options and combinations is now supported.
Hopefully older syntax still works as well.
lvcreate --cache --cachepool vg/pool -l1
lvcreate --type cache --cachepool vg/pool -l1
lvcreate --type cache-pool vg/pool -l1
lvcreate --type cache-pool --name pool vg -l1
... and many many more ...
Since _pmspare is internal volume move it to
lv_remove_single - so it's automatically removed with
last remove thin-pool.
lv_remove_with_dependencies() is not always used for pool removal.
--splitcache
Splits only cached LV (also pool could be specified).
Detaches cachepool from cached LV.
--split
Should be univerzal command to split various complex targets.
At this moment it knows cache.
--uncache
Opposite command to --cache. Detaches and DELETES cachepool for
cached LV.
Note: we support thin pool cached metadata device for uncaching.
Also use may specify wither cached LV or association cachepool device
to request split of cache.
Over the time lvcreate code has accumulated various hacks.
So try to move that code in right places.
Detect all types early in _lvcreate_params() so functions like
_read_size_params() do not need to change volume types.
Also ultimately respect give volume --type, that its shortcut
(-T, H, -m, -s) and after that options which do type estimation.
(i.e. --cachepool, --thinpool)
Avoid repeative tests - if we know all types are decode at once
place we can 'optimize' number of validations.
Split VG argument collection from processing.
This allows the two different loops through VGs to
be replaced by a single loop.
Replace unused struct cmd_vg and cmd_vg_read() replicator
code with struct vg and vg_read() directly.
[Committed by agk with cosmetic changes and tweaks.]
We use adjusted_mirror_region_size() in two different contexts.
Either on command line -
here we do want to inform user about reduction of size.
Or in pvmove activation context -
here we should only use 'verbose' info.
When requesting to reload an LV imrove this API to
automatically reload its lock holding LV as in cluster
only top-level LVs are addressable with lock.
When vg_ondisk is NULL we do not need to search
through the whole VG to find out the same LV.
NOTE: as of now - VG locking is not enabled as some code parts
are breaking memory locking rules (lvm2app).
Once we enforce VG locking for read-only commands the effect
will be much better for larger VGs.
