IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There's a tiny race when suspending the device which is part
of the refresh because when suspend ioctl is performed, the
dm kernel driver executes (do_suspend and dm_suspend kernel fn):
step 1: a check whether the dev is already suspended and
if yes it returns success immediately as there's
nothing to do
step 2: it grabs the suspend lock
step 3: another check whether the dev is already suspended
and if found suspended, it exits with -EINVAL now
The race can occur in between step 1 and step 2. To prevent
premature autoactivation failure, we're using a simple retry
logic here before we fail completely. For a complete solution,
we need to fix the locking so there's no possibility for suspend
calls to interleave each other to cause this kind of race.
This is just a workaround. Remove it and replace it with proper
locking once we have that in!
Failures in the temporary mirror used when up-converting cause dmeventd
to issue 'lvconvert --repair' on the sub-LV, <lv_name>_mimagetmp_?. The
'lvconvert' command refuses to deal with this sub-LV outright - it
expects to be given the name of the top-level LV. So, just like we do
with mirrored logs, we strip-off the portion of the name that is not
the top-level LV and issue the command on the top-level LV instead.
Send error message on stdout, since after _display_info_long()
command return errors.
Patch makes consistent behavior for command:
dmsetup info -c non-existing-dev
&
dmsetup info non-existing-dev
Now both commands report error on stderr when they return error status
for non-existing device.
This patch fixes mostly cluster behavior but also updates
non-cluster reaction where calls like 'lvchange -aln'
lead to incorrect errors for some segment types.
Fix the implicit activation rules where some segment types could
be activated only in exclusive mode in cluster.
lvm2 command was not preserver 'local' property and incorrectly
converted local activations in to plain exclusive, so the local
activation could have activate volumes exclusively, but remotely.
If the volume_list filters out volume from activation,
it is still success result for this function.
Change the error message back to verbose level.
Detect if the volume is active localy before zeroing,
so we report error a bit later for cases, where volume
could not be activated because it doesn't pass through volume
list (but user still could create volume when he disables
zeroing)
Correct return code of activate_lv_excl().
Function is not supposed to return activation state of
activated volume, but return code of the operation.
Since i.e. when activation filter is allowing to activate
volume on current system, it is still success even though
no volume is activated.
MD can directly create partition devices without a need to run
an extra kpartx or partprobe call. We need to react to this event in
a different way as for bare MD devices - we need to handle the ADD event
for KERNEL=="md[0-9]*p[0-9]*" kernel name and trigger the LVM scanning
to update lvmetad to trigger autoactivation and so on...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023250
This is an addition to original patch for lvcreate - commit 039bdad.
The same principle applies to lvconvert where there are several steps
during which we need to wipe the existing LV that's being converted
to thin pool, making sure there's no other interference from outside (udev).
Reset the DM_UDEV_OTHER_RULES_FLAG to original value right at the
time of dropping the DM_NOSCAN flag.
When DM_NOSCAN is set, the DM_UDEV_DISABLE_OTHER_RULES_FLAG is also set
to avoid udev processing in "other/foreign" rules. If the noscan flag
is dropped, the DM_UDEV_DISABLE_OTHER_RULES_FLAG should be reset to
its original value.
Also, lvmetad should respect the DM_UDEV_DISABLE_OTHER_RULES_FLAG
because if the volume is set with this flag it:
- definitely is not a top-level device (so makes no sense for lvmetad scanning)
- is not supposed to be scanned further (for any stacking on top of
it, including LVM stacking itself and any autoactivation of stacked LVs)
Remove conditional that boils down to "if yes or no, then do". The
previous condition in the statement is sufficient and the extra
(always true) condition is unnecessary.
This fixes a bug in commit 19baf842 where verify_message
was rejecting the CLVMD_FLAG_REMOTE flag. It was missed
since the patch was ported from an lvm version where that
flag does not exist.
There is a problem with the way mirrors have been designed to handle
failures that is resulting in stuck LVM processes and hung I/O. When
mirrors encounter a write failure, they block I/O and notify userspace
to reconfigure the mirror to remove failed devices. This process is
open to a couple races:
1) Any LVM process other than the one that is meant to deal with the
mirror failure can attempt to read the mirror, fail, and block other
LVM commands (including the repair command) from proceeding due to
holding a lock on the volume group.
2) If there are multiple mirrors that suffer a failure in the same
volume group, a repair can block while attempting to read the LVM
label from one mirror while trying to repair the other.
Mitigation of these races has been attempted by disallowing label reading
of mirrors that are either suspended or are indicated as blocking by
the kernel. While this has closed the window of opportunity for hitting
the above problems considerably, it hasn't closed it completely. This is
because it is still possible to start an LVM command, read the status of
the mirror as healthy, and then perform the read for the label at the
moment after a the failure is discovered by the kernel.
I can see two solutions to this problem:
1) Allow users to configure whether mirrors can be candidates for LVM
labels (i.e. whether PVs can be created on mirror LVs). If the user
chooses to allow label scanning of mirror LVs, it will be at the expense
of a possible hang in I/O or LVM processes.
2) Instrument a way to allow asynchronous label reading - allowing
blocked label reads to be ignored while continuing to process the LVM
command. This would action would allow LVM commands to continue even
though they would have otherwise blocked trying to read a mirror. They
can then release their lock and allow a repair command to commence. In
the event of #2 above, the repair command already in progress can continue
and repair the failed mirror.
This patch brings solution #1. If solution #2 is developed later on, the
configuration option created in #1 can be negated - allowing mirrors to
be scanned for labels by default once again.
Add LV_TEMPORARY flag for LVs with limited existence during command
execution. Such LVs are temporary in way that they need to be activated,
some action done and then removed immediately. Such LVs are just like
any normal LV - the only difference is that they are removed during
LVM command execution. This is also the case for LVs representing
future pool metadata spare LVs which we need to initialize by using
the usual LV before they are declared as pool metadata spare.
We can optimize some other parts like udev to do a better job if
it knows that the LV is temporary and any processing on it is just
useless.
This flag is orthogonal to LV_NOSCAN flag introduced recently
as LV_NOSCAN flag is primarily used to mark an LV for the scanning
to be avoided before the zeroing of the device happens. The LV_TEMPORARY
flag makes a difference between a full-fledged LV visible in the system
and the LV just used as a temporary overlay for some action that needs to
be done on underlying PVs.
For example: lvcreate --thinpool POOL --zero n -L 1G vg
- first, the usual LV is created to do a clean up for pool metadata
spare. The LV is activated, zeroed, deactivated.
- between "activated" and "zeroed" stage, the LV_NOSCAN flag is used
to avoid any scanning in udev
- betwen "zeroed" and "deactivated" stage, we need to avoid the WATCH
udev rule, but since the LV is just a usual LV, we can't make a
difference. The LV_TEMPORARY internal LV flag helps here. If we
create the LV with this flag, the DM_UDEV_DISABLE_DISK_RULES
and DM_UDEV_DISABLE_OTHER_RULES flag are set (just like as it is
with "invisible" and non-top-level LVs) - udev is directed to
skip WATCH rule use.
- if the LV_TEMPORARY flag was not used, there would normally be
a WATCH event generated once the LV is closed after "zeroed"
stage. This will make problems with immediated deactivation that
follows.
The blkdeactivate script iterates over the list of devices if they're
given as an argument and it tries to umount/deactivate them one by one.
This iteration failed to proceed if any of the umount/deactivation
was unsuccessful - there was a missing "shift" call to move to the
next argument (device) for processing. As a result of this, the same
device was tried again and again, causing an endless loop, never
proceeding to the next device given.
When using ENV{SYSTEMD_WANTS}=lvm2-pvscan@... to instantiate a service
for lvmetad scan when the new PV appears in the system, the service
is started and executed. However, to track device removal, we need
to bind it (the "BindsTo" systemd directive) to a certain .device
systemd unit.
In default systemd setup, the device is tracked by it's name and
sysfs path (there's normally a sysfs path .device systemd unit for
a device and then the device name .device unit as an alias for it).
Neither of these two is useful for lvmetad update as we need to bind
it to device's <major>:<minor> pair.
The /dev/block/<major>:<minor> is the essential symlink under /dev
that exists for each block device (created by default udev rules
provided by udev directly). So let's use this as an alias for
the device's .device unit as well by means of "ENV{SYSTEMD_ALIAS}"
declaration within udev rules which systemd understands (this will
create a new alias "dev-block-<major>:<minor>.device".
Then we can easily bind the "dev-block-<major>:<minor>" device
systemd unit with instantiated lvm2-pvscan@<major>:<minor>.service.
So once the device is removed from the systemd, the
lvm-pvscan@<major>:<minor>.service executes it's ExecStop action
(which in turn notifies lvmetad about the device being gone).
This completes the udev-systemd-lvmetad interaction then.
Before, pvscan recognized either:
pvscan --cache --major <major> --minor <minor>
or
pvscan --cache <DevicePath>
When the device is gone and we need to notify lvmetad about device
removal, only --major/--minor works as we can't translate DevicePath
into major/minor pair anymore. The device does not exist in the system
and we don't keep DevicePath index in lvmetad cache to make the
translation internally into original major/minor pair. It would be
useless to keep this index just for this one exact case.
There's nothing bad about using "--major <major> --minor <minor>",
but it makes our life a bit harder when trying to make an
interconnection with systemd units, mainly with instantiated services
where only one and only one arg can be passed (which is encoded in the
service name).
This patch tries to make this easier by adding support for recognizing
the "<major>:<minor>" as a shortcut for the longer form
"--major <major> --minor <minor>". The rule here is simple: if the argument
starts with "/", it's a DevicePath, otherwise it's a <major>:<minor> pair.
There is no point eating stderr for these commands. In fact the
redirect causes confusion and hurts dubugging.
Also reword an error message if the pvs command fails so as not be
certain that a device is not a PV. Coupled with removing the stderr
redirect this will improve the user experience in the face of errors.
The new lvm2-pvscan@.service is responsible for on-demand execution
of "pvscan --cache --activate ay" which causes lvmetad to be
updated and LVM activation done if the VG is complete.
Also, use udev-systemd mechanism to instantiate the job as the
lvm2-pvscan@$devnode.service on each newly appeared PV in the system.
This prevents the background job to be killed (that would happen
if it was directly forked from udev rule - this behaviour is seen
in recent versions of udev with the help of systemd that can track
detached processes - the detached process would still be in the same
cgroup).
To enable this official udev-systemd protocol for instantiating
background jobs, use new --enable-udev-systemd-background-jobs
configure switch (it's disabled by default). This option is highly
recommended wherever systemd is used!
Reverts previously added udevsettle call.
Seems to be unrelated, while udev on old system may take over 10
minutes, to finish it's very slow and CPU intensive work, it doesn't
interact directly with created device, only access /dev/mapper/control
node via dmsetup, so the device is ocasionaly blocked by something else.
Patch helps a bit when lvm2 is build with disabled udev_sync support,
but udevd runs in the system - so it randomly influences unrelated tests
even - so before every test wait at least till udevd is settled.
On modern systems udev manages nodes in /dev/mapper directory.
It creates, deletes and renames the nodes according to the
state of the kernel driver.
When the dmsetup is compiled without udev support (--enable-udev_sync)
and runs on the system with running udevd it tries to manage nodes in
/dev/mapper too, so it can race with udev.
dmsetup checks if the node was created/deleted/renamed with the stat
syscall, and skips the operation if it was. However, if udev
creates/deletes/renames the node after the stat syscall and before the
mknod/unlink/rename syscall, dmsetup reports an error.
Since in the system everything happened as expected, skip reporting
error for such case.
These races can be easily provoked by inserting sleep at appropriate
places.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This file may be included by other programs, so it should be compliant
with the C standard.
* use __linux__ instead of linux - __linux__ is always defined, linux is
not defined when gcc runs in standard-compliant mode (with -std=c89 or
-std=c99) because the C standard doesn't allow polluting namespace
with arbitrary defines.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Initial testing of thin pool's metadata with thin repairing tools.
Try to use tools from configuration settings, but allow them
to be overriden by settings of these variables:
LVM_TEST_THIN_CHECK_CMD,
LVM_TEST_THIN_DUMP_CMD,
LVM_TEST_THIN_REPAIR_CMD
FIXME: test reveals some more important bugs:
pvremove -ff also needs --yes
vgremove -ff doesn not remove metadata when there are no real LVs.
vgreduce is not able to reduce VG with pool without pool's PVs
