IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Split single check_lv_segments() into 2 separate
versions so they can be called independently.
This allow to 'skip' already checked segment
check after it's been imported to VG and also
avoid another repeated checking when validating
segment with complete vg.
**
check_lv_segments_incomplete_vg()
this check just basic LV segment properties and does not
validate those requiring full VG.
**
check_lv_segments_complete_vg()
Remaining check that expects complete VG is present.
ATM this rather save a lot of unncessary log entries as it grabs
the global autoextend_threshold (profile == NULL) just once instead
of revealing it every time with NULL profile.
Track whether import has even seen segment of LV with log_lv,
and call fixup mirror only in this case.
Also avoid repeated lookup of get_segtype_from_string for
SEG_TYPE_NAME_MIRROR.
Use bigger memory pool chunk size and reduces amount of
memory pool extensions when handling larger metadata, but do not
make it noticable bigger when handling small ones...
Use same large value also when allocating VG memory pool.
This code is faster when calculating crc32 checksum for larger
block areas. There is also SIMD variant present in the code,
however ATM the influence on performance of lvm2 is not that big..
When BLKZEROOUT ioctl fails, it should not stop us from trying the direct
zeroing as a fallback action, since this is an optimization only.
We should be able to continue with new LV creation if we succeed
with that direct fallback then.
Related report: https://issues.redhat.com/browse/RHEL-58737
commit a125a3bb50 "lv_remove: reduce commits for removed LVs"
changed "lvremove <vgname>" from removing one LV at a time,
to removing all LVs in one vg write/commit. It also changed
the behavior if some of the LVs could not be removed, from
removing those LVs that could be removed, to removing nothing
if any LV could not be removed. This caused a regression in
shared VGs using sanlock, in which the on-disk lease was
removed for any LV that could be removed, even if the command
decided to remove nothing. This would leave LVs without a
valid ondisk lease, and "lock failed: error -221" would be
returned for any command attempting to lock the LV.
Fix this by not freeing the on-disk leases until after the
command has decided to go ahead and remove everything, and
has written the VG metadata.
Before the fix:
node1: lvchange -ay vg/lv1
node2: lvchange -ay vg/lv2
node1: lvs
lv1 test -wi-a----- 4.00m
lv2 test -wi------- 4.00m
node2: lvs
lv1 test -wi------- 4.00m
lv2 test -wi-a----- 4.00m
node1: lvremove -y vg/lv1 vg/lv2
LV locked by other host: vg/lv2
(lvremove removed neither of the LVs, but it freed
the lock for lv1, which could have been removed
except for the proper locking failure on lv2.)
node1: lvs
lv1 test -wi------- 4.00m
lv2 test -wi------- 4.00m
node1: lvremove -y vg/lv1
LV vg/lv1 lock failed: error -221
(The lock for lv1 is gone, so nothing can be done with it.)
Detect when we have mixed dos partition with gpt's PMBR partition.
This is not a sane configuration, but detect it anyway, just in case
someone configures such partition layout manually and forcefully and
incorrectly defines one of the partition types to be the GPT's PMBR.
For example:
❯ fdisk -l /dev/sdc
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 67583 65536 32M 83 Linux
/dev/sdc2 67584 262143 194560 95M ee GPT
Before:
(The partition filter passes even though there's real existing dos
partition - the empty GPT PMBR overrides it.)
❯ pvcreate /dev/sdc
WARNING: PMBR signature detected on /dev/sdc at offset 510. Wipe it? [y/n]:
Wiping PMBR signature on /dev/sdc.
Physical volume "/dev/sdc" successfully created.
With this patch applied:
(The GPT PMBR does not override the existence of the dos partition.)
❯ pvcreate /dev/sdc
Cannot use /dev/sdc: device is partitioned
This provides better hints when trying to resize the fs on top of an LV.
Also needs a3f6d2f593 for proper operation.
❯ lvs -o name,size vg/swap
lv_name lv_size
swap 60.00m
Before:
❯ lvextend -L72m vg/swap
Size of logical volume vg/swap changed from 60.00 MiB (15 extents) to 72.00 MiB (18 extents).
Logical volume vg/swap successfully resized.
❯ lvreduce -L60m vg/swap
File system swap found on vg/swap.
File system device usage is not available from libblkid.
❯ lvreduce -L50m vg/swap
Rounding size to boundary between physical extents: 52.00 MiB.
File system swap found on vg/swap.
File system device usage is not available from libblkid.
After:
❯ lvextend -L72m vg/swap
Size of logical volume vg/swap changed from 60.00 MiB (15 extents) to 72.00 MiB (18 extents).
Logical volume vg/swap successfully resized.
❯ lvreduce -L60m vg/swap
File system swap found on vg/swap.
File system size (60.00 MiB) is equal to the requested size (60.00 MiB).
File system reduce is not needed, skipping.
Size of logical volume vg/swap changed from 72.00 MiB (18 extents) to 60.00 MiB (15 extents).
Logical volume vg/swap successfully resized.
❯ lvreduce -L50m vg/swap
Rounding size to boundary between physical extents: 52.00 MiB.
File system swap found on vg/swap.
File system size (60.00 MiB) is larger than the requested size (52.00 MiB).
File system reduce is required and not supported (swap).
blkid does not report FSLASTBLOCK for a swap device. However, blkid
does report FSSIZE for swap devices, so use this field (and including
the header size which is of FSBLOCKSIZE for the swap) instead to
set the "filesystem last block" which is used subsequently for
further calculations and conditions.
We already detect msdos partition table. If it is empty, that is, there
is just the partition header and no actual partitions defined, then the
filter-partitioned passes, otherwise not.
Do the same for GPT partition table.
New config setting sanlock_align_size can be used to configure
the sanlock lease size that lvmlockd will use on 4K disks.
By default, lvmlockd and sanlock use 8MiB align_size (lease size)
on 4K disks, which supports up to 2000 hosts (and max host_id.)
This can be reduced to 1, 2 or 4 (in MiB), to reduce lease i/o.
The reduced sizes correspond to smaller max hosts/host_id:
1 MiB = 250 hosts
2 MiB = 500 hosts
4 MiB = 1000 hosts
8 MiB = 2000 hosts (default)
(Disks with 512 byte sectors always use 1MiB leases and support
2000 hosts/host_id, and are not affected by this.)
In cases user is sure he is not using his 'rootfs' or 'swap' on LVs
managed with his command - it possible to completely bypass pinning
process to RAM which may eventually slightly speedup command execution,
(however at the risk the process can be eventually delayed by swapping).
Basicaly use this only at your risk...
TODO: add some dmeventd support for this.
Previously, lvmlockd detected the end of the lvmlock LV
by doing i/o to it until an i/o error was returned.
This triggered sanlock warning messages, so use the LV
size to avoid accessing beyond the end of the device.
Previously, every lvcreate would refresh the lvmlock LV
in case another machine had extended it. This involves
a lot of unnecessary work in most cases, so now compare
the LV size and device size to detect when a refresh is
needed.
lvremove of a thin lv while the pool is inactive would
leave the pool locked but inactive.
lvcreate of a thin snapshot while the pool is inactive
would leave the pool locked but inactive.
lvcreate of a thin lv could activate the pool to check
a threshold before the pool lock was acquired in lvmlockd.
The lv_hash wasn't being passed to the seg-specific text import
functions, so they were doing many find_lv() calls which consumes
a lot of time when there are many LVs in the metadata.
Older gcc doesn't really like complex types (buffer, struct) to be
initialized without extra {} around such type.
So pick any other 'single type' var from a struct and set it to 0,
rest will do the compiler without emitting a warning.
Revert 373372c8ab and instead update
our validation code to handle LVs with empty segment - currently
we should need this only for pvmove operation, thus such LV should
have name 'pvmove%u'.
This fixes a problem where user tried i.e. pvmove on a VG with single
PV - as reported: https://github.com/lvmteam/lvm2/issues/148
Reported-by: bob@redhat.com
The option can be used in multiple ways (like --cachesettings):
--integritysettings key=val
--integritysettings 'key1=val1 key2=val2'
--integritysettings key1=val1 --integritysettings key2=val2
Use with lvcreate or lvconvert when integrity is first enabled
to configure:
journal_sectors
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
Use with lvchange to configure (only while inactive):
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
lvchange --integritysettings "" clears any previously configured
settings, so dm-integrity will use its own defaults.
lvs -a -o integritysettings displays configured settings.
log/command_log_report config setting defaults to 1 now if json or json_std
output format is used (either by setting report/output_format config
setting or using --reportformat cmd line arg).
This means that if we use json/json_std output format, the command log
messages are then part of the json output too, not interleaved as
unstructured text mixed with the json output.
If log/command_log_report is set explicitly in the config, then we still
respect that, no matter what output format is used currently. In this
case, users can still separate and redirect the output by using
LVM_OUT_FD, LVM_ERR_FD and LVM_REPORT_FD so that the different types
do not interleave with the json/json_std output.
