IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Ensure configure.h is always 1st. included header.
Maybe we could eventually introduce gcc -include option, but for now
this better uses dependency tracking.
Also move _REENTRANT and _GNU_SOURCE into configure.h so it
doesn't need to be present in various source files.
This ensures consistent compilation of headers like stdio.h since
it may produce different declaration.
When sanlock_release returns an error because of an i/o
timeout releasing the lease on disk, lvmlockd should just
consider the lock released. sanlock will continue trying
to release the lease on disk after the original request
times out.
The choice about sector size and lease align size is
now made by the sanlock user, in this case lvmlockd.
This will allow lvmlockd to use other lease sizes in
the future. This also prevents breakage if hosts
report different sector sizes, or the sector size
reported by a device changes.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
The device-mapper directory now holds a copy of libdm source. At
the moment this code is identical to libdm. Over time code will
migrate out to appropriate places (see doc/refactoring.txt).
The libdm directory still exists, and contains the source for the
libdevmapper shared library, which we will continue to ship (though
not neccessarily update).
All code using libdm should now use the version in device-mapper.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
When sanlock or dlm lock managers return an error number
that we don't recognize, replace it with a generic -ELMERR
which is defined in the set of special lvmlockd error
numbers. Otherwise, an unknown lock manager error number
could be misinterpreted for something else if it happened
to overlap another set of error numbers (which they have
not thus far.)
These less common errors returned from sanlock should
also cause sanlock to retry the lock acquire:
- i/o timeout occurs during sanlock_acquire().
other i/o on the same disk as the leases can cause
sanlock i/o timeouts.
- low level disk paxos contention between hosts naturally
causes one host to not acquire the lease. There are a
couple special error numbers associated with these cases
that should just be recognized as a normal failure to
acquire the lease.
gcc warns here about storring 69 bytes in 64 byte array (losing
potentially 4 bytes from 'ls->name').
lvmlockd-core.c:2657:36: warning: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size 60 [-Wformat-truncation=]
snprintf(tmp_name, MAX_NAME, "REM:%s", ls->name);
^~
lvmlockd-core.c:2657:2: note: ‘snprintf’ output between 5 and 69 bytes into a destination of size 64
snprintf(tmp_name, MAX_NAME, "REM:%s", ls->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replaced with slightly better code - but it still misses error path what
to do if the name would be truncated... - so added FIXME.
Also using all bytes for snprintf() buffer size
(as the size is with \0 included)
currently, lvcreate for sanlock find the free lock offset
from the beginning of the lvmlock every time.
after created thousands of lvs, it will issue thousands of read
ios for lvcreate to find free lock offset.
remeber the last free lock offset will greatly reduce the impact
Signed-off-by: Zhang Huan <zhanghuan@huayun.com>
Check first if we need to even link -lrt - since clock functions
are normally emebeded with recent glibc (>=2.17)
Use standard RT_LIBS name.
Avoid duplicate test for realtime clock with lvmlockd
Show better error message when realtime clock support is missing or
disabled.
Link RT_LIBS explicitely with lvmlockd and lvmetad.
Avoid adding -g more then once for debug builds.
Avoid enabling DEBUG_MEM when we build multithreaded tools.
Link executables with -fPIE -pie and --export-dynamic LDFLAGS
Introduce PROGS_FLAGS to add option to pass flags for external libs.
Link lvm2 internally library only when really used.
Link DAEMON_LIBS with daemons.
Pass VALGRIND_CFLAGS internally
Set shell failure mode on couple places.
API for strtod() or strtoul() needs reset of errno, before it's being
called. So add missing resets in missing places and some also some
errno validation for out-of-range numbers.
1. dm_uuid is 68 byte length, but buf is 64 which
will cause miss match uuid from lv lock manager
2. no lv lock_type path in dm config, use lock_args instead
Signed-off-by: Zhang Huan <zhanghuan@chinac.com>
If the VG holding the global lock is removed, we can indicate
that as the reason for not being able to acquire the global
lock in subsequent error messages, and can suggest enabling
the global lock in another VG. (This helpful error message
will go away if the global lock is enabled in another VG,
or if lvmlockd is restarted.)
Reconnect to lvmetad if either the send fails (e.g. lvmetad
was restarted since lvmlockd last connected), or if no
lvmetad connection exists (e.g. lvmetad was started after
lvmlockd so no previous connection existed.)
All the variables for sscanf in lvmlockctl.c and lvmlockd-sanlock.c are
zeroed before sscanf call so the failure is detected by seeing the zero
value instead of proper one in subsequent code - so use (void) for
sscanf calls to ignore return value here.
After the lockspace has been successfully removed,
invalidate the name field in the lockspace struct.
The struct remains on the list of lockspaces until
the struct can be freed later. Until the struct is
freed, its name will prevent another new lockspace
from being created with the same name.
Make the lvb validation rules for convert match
those for unlock (even though it would be very
unlikely or impossible for convert to deal with
zero lvb.)
Have commands send lvmlockd the update message
in vg_write instead of vg_commit, so that it's
not done while LVs are suspended. If the vg_write
is not committed, and the seqno sent to lvmlockd
is not used, then lvmlockd can detect this when
the next update uses the same seqno.
If a host failed while holding a sanlock lease,
sanlock_acquire will by default block and wait
for the lease to expire before returning. We
want it to return with an error so we can retry
instead of blocking, which allows us to process
other lock operations.
(Enclose this in an ifdef until the new flag
appears in a sanlock release.)
If lvmlockd acquires an lv lock for a command, but the
command exits before the reply, then the command has
not activated the lv and lvmlockd should unlock it.
This only applies when the lv was not already locked.
(There will always be a chance that the lv lock is held
while the lv is not active, i.e. if the command fails in
the small window between getting the lv lock and before
doing the activation. In that case, rerunning the
activation command corrects the inconsistency.)
This commit helps by automatically clearing the
inconsistency (lv locked by not activated) in the most
common case when the lv lock operation is slow to
complete and the command is canceled by the user.
This commit also adds and cleans up references to the
client id in a bunch of log messages, which is useful
to follow processing on each independent lock request.
This applies the same rule/logic to dlm VGs that has always
existed for sanlock VGs. Allowing a dlm VG to be removed
while its lockspace was still running on other hosts largely
worked, but there were difficult problems if another VG with
the same name was recreated. Forcing the VG lockspace to
be stopped, gives both sanlock and dlm VGs the same behavior.
This shortcut was added for an odd case that I do not
believe is relevant any more. Having an alternate
path for lockspace thread cleanup is a complication
that could lead to problems.
The dlm will often lose the lvb content, so we need to
check quite a few possibilities for lvb values that
were not being checked before.
Refactoring was required to pass the entire lvb value
back to the core code instead of the single value.
The only functional change should be detecting new
lvb states where metadata is now invalidated where
it wasn't before.
When an action is created by lvmlockd for itself,
there is no client to send the result to. Add
the NO_CLIENT flag to the action to skip sending
the result to a client.
Undo the part of the recent EREMOVED change which
automatically stopped the lockspace for a remotely
removed VG. It didn't always work (would not work
when lvb content was rebuilt in the dlm). This will
be handled better when the lvb content is controlled
more strictly.
Remove the optimization/shortcut for starting the dlm global
lockspace when it was already running.
Reenable automatically starting the dlm global lockspace
when a command attempts to use it and it's not yet started.
This had become disabled at some point.
Include both the VG uuid and name in the lvmetad
set_vg_info message. This works around an obscure
problem where the VG uuid in lvmlockd is wrong
when one host removes a dlm VG, then creates a new
VG with the same name. If the dlm lockspace for
the initial VG was never stopped on another host,
that other host will be using the old uuid in its
lvmetad set_vg_info message. (That can be
corrected with a larger change, but this is an
effective workaround.)
lvmlockd would fail to recognize that the global lockspace
failed to start if the dlm wasn't running, so future attempts
to start the dlm global lockspace would do nothing, thinking
it was already running.
This was only used to return two flags indicating specific
reasons for a lock failure so that a more specific error
message could be printed by the command (lockspace had been
stopped, or lockspace had an error starting.)
Remove the list, given its limited usefulness, the fact it
would easily become inaccurate, and the fact it was causing
misleading error messages. The error conditions it was meant
to help could be reported differently.
This makes lvmlockd removal steps for dlm VGs closely match
sanlock VGs. Because dlm lockspaces are not required to be
stopped on all hosts before vgremove, there is an extra bit
for dlm lockspaces, where a flag is set in the VG lock lvb
indicating that the VG was removed. If other hosts happen
to use the VG lock they will see this flag and stop their
lockspace.
Single messages sent over unix sockets are limited in
size to /proc/sys/net/core/wmem_max, so send the 1MB
debug buffer in smaller chunks to avoid EMSGSIZE.
Also look for EAGAIN and retry sending for a limited
time when the reader is slower than the writer.
Also shift the location of that code so it's the same
as other requests.
The check for other sanlock lockspaces was not checking
that the lockspace type was sanlock, so if dlm lockspaces
were visible, they were wrongly included.
This adds the infrastructure, code paths, error reporting,
etc. to handle storage errors, or storage loss, under the
sanlock leases in a VG that is being used. The loss of
storage means sanlock cannot renew its leases, which means
that the host needs to stop using the shared VG before its
leases expire.
This still requires manually shutting down a VG that has
lost lease storage, e.g. unmounting file systems,
deactivating LVs in the VG. The next step is to
automatically use a command like blkdeactivate to do that.
