IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before, we refreshed filters and we did full rescan of devices if
we passed through wiping (wipe_known_signatures fn call). However,
this fn returns success even if no signatures were found and so
nothing was wiped. In this case, it's not necessary to do the
filter refresh/rescan of devices as nothing changed clearly.
This patch exports number of wiped signatures from all the
wiping functions below. The caller (_pvcreate_check) then checks
whether any wiping was done at all and if not, no refresh/rescan
is done, saving some time and resources.
pvcreate code path executes signature wiping if there are any signatures
found on device to prepare the device for PV. When the signature is wiped,
the WATCH udev rule triggers the event which then updates udev database
with fresh info, clearing the old record about previous signature.
However, when we're using udev db as dev-ext source, we'd need to wait
for this WATCH-triggered event. But we can't synchronize against such
events (at least not at this moment). Without this sync, if the code
continues, the device could still be marked as containing the old
signature if reading udev db. This may end up even with the device
to be still filtered, though the signature is already wiped.
This problem is then exposed as (an example with md components):
$ mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda /dev/sdb --run
$ mdadm -S /dev/md0
$ pvcreate -y /dev/sda
Wiping linux_raid_member signature on /dev/sda.
/dev/sda: Couldn't find device. Check your filters?
$ echo $?
5
So we need to temporarily switch off "udev" dev-ext source here
in this part of pvcreate code until we find a way how to sync
with WATCH events.
(This problem does not occur with signature wiping which we do
on newly created LVs since we already handle this properly with
our udev flags - the LV_NOSCAN/LV_TEMPORARY flag. But we can't use
this technique for non-dm devices to keep WATCH rule under control.)
(This reverts patch #d95c6154)
Filter complete device list through full_filter unconditionally when
we're getting the list of *all* devices even in case we're interested
only in fraction of those devices - the PVs, not the other devices
which are not PVs yet (e.g. pvs vs. pvs -a).
We need to do this full filtering whenever we're handling *complete*
list of devices, we need to be safe here, mainly if there are any
future changes and we'd forgot to change to use proper filtering then.
Also properly preventing duplicates if there are any block subsystem
components used (mpath, MD ...).
Thing here is that (under use_lvmetad=1), cmd->filter can be used
only if we're sure that the list of devices we're filtering contains
only PVs. We have to use cmd->full_filter otherwise (like it is in
case of _get_all_devices fn which acquires complete list of devices,
no matter if it is a PV or not).
Of course, cmd->full_filter is more extensive than cmd->filter
which is only a subset of full_filter.
We could optimize this in a way that if we're interested in PVs only
during process_each_pv processing (e.g. using pvs in contrast to pvs -a),
we'd get the list of PV devices directly from lvmetad from the
lvmcache_seed_infos_from_lvmetad fn call which currently updates
lvmcache only. We'd add an additional output arg for this fn to get
the list of PV devices directly in addition, without a need to iterate
over all devices which include non-PVs which we're not interested in
anyway, hence we could use only cmd->filter, not the cmd->full_filter.
So the code would look something like this:
static int _get_all_devices(....)
{
struct device_id_list *dil;
if (interested_in_pvs_only)
lvmcache_seed_infos_from_lvmetad(cmd, &dil); /* new "dil" arg */
/* the "dil" list would be filtered through cmd->filter inside lvmcache_seed_infos_from_lvmetad */
else {
lvmcache_seed_infos_from_lvmetad(cmd, NULL);
dev_iter_create(cmd->full_filter)
while (dev = dev_iter_get ...) {
dm_list_add(all_devices, &dil->list);
}
}
}
pvchange now uses process_each_pv so uncomment parts of the test
which check proper functionality of intersection between selection
result and PVs or PV tags directly provided on command line. This
didn't work properly before when pvchange was not using process_each_pv.
For example:
pvchange -u -S 'pv_name=/dev/sda' /dev/sdb
..changes nothing since clearly the intersection of /dev/sda and
/dev/sdb is empty set. The same applies for tags:
pvchange -u -S 'pv_name=/dev/sda' @some_tag
..changes nothing if /dev/sda is not tagged with some_tag.
It's cleaner this way - do not mix static and dynamic
(init_processing_handle) initializers. Use the dynamic one everywhere.
This makes it easier to manage the code - there are no "exceptions"
then and we don't need to take care about two ways of initializing the
same thing - just use one common initializer throughout and it's clear.
Also, add more comments, mainly in the report_for_selection fn explaining
what is being done and why with respect to the processing_handle and
selection_handle.
Invalid devices no longer included in the counters printed at the end.
May now need to use --ignoreskippedcluster if relying upon exit status.
If more than one change is requested per-PV, attempt to perform them
all. Note that different arguments still handle exit status
differently.
When lvm2 is build with valgrind pool detection - always disable
memcheck, since pool memory allocation are unconditionaly passed
into valgrind library.
We still need to get the list as the calls underneath process_each_pv
rely on this list. But still keep the change related to the filters -
if we're processing all devices, we need to use cmd->full_filter.
If we're processing only PVs, we can use cmd->filter only to save
some time which would be spent in filtering code.
When lvmetad is used and at the same time we're getting list of all
PV-capable devices, we can't use cmd->filter (which is used to filter
out lvmetad responses - so we're sure that the devices are PVs already).
To get the list of PV-capable devices, we're bypassing lvmetad (since
lvmetad only caches PVs, not all the other devices which are not PVs).
For this reason, we have to use the "full_filter" filter chain (just
like we do when we're running without lvmetad).
Example scenario:
- sdo and sdp components of MD device md0
- sdq, sdr and sds components of mpatha multipath device
- mpatha multipath device partitioned
- vda device partitioned
=> sdo,sdp,sdr,sds, mpatha and vda should be filtered!
$ lsblk -o NAME,TYPE
NAME TYPE
sdn disk
sdo disk
`-md0 raid0
sdp disk
`-md0 raid0
sdq disk
`-mpatha mpath
`-mpatha1 part
sdr disk
`-mpatha mpath
`-mpatha1 part
sds disk
`-mpatha mpath
`-mpatha1 part
vda disk
|-vda1 part
`-vda2 part
|-fedora-swap lvm
`-fedora-root lvm
Before this patch:
==================
use_lvmetad=0 (correct behaviour!)
$ pvs -a
PV VG Fmt Attr PSize PFree
/dev/fedora/root --- 0 0
/dev/fedora/swap --- 0 0
/dev/mapper/mpatha1 --- 0 0
/dev/md0 --- 0 0
/dev/sdn --- 0 0
/dev/vda1 --- 0 0
/dev/vda2 fedora lvm2 a-- 9.51g 0
use_lvmetad=1 (incorrect behaviour - sdo,sdp,sdq,sdr,sds and mpatha not filtered!)
$ pvs -a
PV VG Fmt Attr PSize PFree
/dev/fedora/root --- 0 0
/dev/fedora/swap --- 0 0
/dev/mapper/mpatha --- 0 0
/dev/mapper/mpatha1 --- 0 0
/dev/md0 --- 0 0
/dev/sdn --- 0 0
/dev/sdo --- 0 0
/dev/sdp --- 0 0
/dev/sdq --- 0 0
/dev/sdr --- 0 0
/dev/sds --- 0 0
/dev/vda --- 0 0
/dev/vda1 --- 0 0
/dev/vda2 fedora lvm2 a-- 9.51g 0
With this patch applied:
========================
use_lvmetad=1
$ pvs -a
PV VG Fmt Attr PSize PFree
/dev/fedora/root --- 0 0
/dev/fedora/swap --- 0 0
/dev/mapper/mpatha1 --- 0 0
/dev/md0 --- 0 0
/dev/sdn --- 0 0
/dev/vda1 --- 0 0
/dev/vda2 fedora lvm2 a-- 9.51g 0
List of all devices is only needed if we want to process devices
which are not PVs (e.g. pvs -a). But if this is not the case, it's
useless to get the list of all devices and then discard it without
any use, which is exactly what happened in process_each_pv where
the code was never reached and the list was unused if we were
processing just PVs, not all PV-capable devices:
int process_each_pv(...)
{
...
process_all_devices = process_all_pvs &&
(cmd->command->flags & ENABLE_ALL_DEVS) &&
arg_count(cmd, all_ARG);
...
/*
* If the caller wants to process all devices (not just PVs), then all PVs
* from all VGs are processed first, removing them from all_devices. Then
* any devs remaining in all_devices are processed.
*/
_get_all_devices(cmd, &all_devices);
...
ret = _process_pvs_in_vgs(...);
...
if (!process_all_devices)
goto out;
ret = _process_device_list(cmd, &all_devices, handle, process_single_pv);
...
}
This patch adds missing check for "process_all_devices" and it gets the
list of all (including non-PV) devices only if needed:
This makes a difference when using selection criteria based on
these fields - if those fields are defined as DM_REPORT_FIELD_TYPE_SIZE
(in contrast to DM_REPORT_FIELD_TYPE_NUMBER), units are also
recognize in selection clause.
For example:
$ lvs -o+seg_start vg1/lv2
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 0
lv2 vg1 -wi-a----- 12.00m 8.00m
Before this patch:
$ lvs -o+seg_start --select 'seg_start=8m'
Found size unit specifier but numeric value expected for selection field seg_start.
Selection syntax error at 'seg_start=8m'.
Use 'help' for selection to get more help.
With this patch applied:
$lvs -o+seg_start --select 'seg_start=8m'
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 8.00m
(the same applies for ba_start and vg_free fields)
