1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

1579 Commits

Author SHA1 Message Date
Dave Wysochanski
5d623bde94 Add vg_set_alloc_policy() liblvm function and move vgchange logic inside.
NOTE: vg_set_alloc_policy() returns success if you try to set a value that
is already stored.  The behavior of vgchange is the same though - it fails.
There is a fixme noted in the code about this inconsistency, which should
be resolved if possible.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-09 10:08:54 +00:00
Dave Wysochanski
dba458ae9a Add vg_set_max_pv() liblvm function and move vgchange logic inside.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-09 10:07:47 +00:00
Dave Wysochanski
a88bfbcb13 Add vg_set_max_lv() liblvm function and move vgchange logic inside.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-09 10:06:00 +00:00
Dave Wysochanski
3f6a21ead4 Rename vg_change_pesize to vg_set_extent_size and use vg_t.
In liblvm, we will reserve the word 'change' to mean an API that
both sets one or more values, and commits to disk.  This will be
consistent with the LVM commandline.  The existing vg_change_pesize()
function does not commit to disk, but just changes the extent_size
and ensures all internal structures are updated.  This logic should
be contained in a function that sets the value.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-09 10:04:52 +00:00
Dave Wysochanski
b1278ba1b8 Remove unused 'cmd' from vg_change_pesize().
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-09 10:03:37 +00:00
Dave Wysochanski
de5dfec56b Update vg_change_pesize() to contain all validity checks.
It would be nice to have one function that does all the validation
and setting of the VG's pesize.  However, currently some checks
are in the higher-level function _vgchange_pesize(), and some
checks are in the lower function vg_change_pesize().
This patch moves most of the higher-level checks inside
vg_change_pesize.  In one case a failure return code is
changed from ECMD_FAILED to EINVALID_CMD_LINE.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-09 10:02:15 +00:00
Dave Wysochanski
9af5a142d0 Add defines for default vgcreate parameters. 2009-07-09 10:00:36 +00:00
Dave Wysochanski
6e7d597a50 Make exit paths more robust when some init function fails.
Author: Dave Wysochanski <dwysocha@redhat.com>
2009-07-08 22:18:32 +00:00
Dave Wysochanski
f882633886 Fix segfault in persistent_filter_dump() if lvm init fails.
Just return_0 in persistent_filter_dump() if passed a NULL filter;
2009-07-08 18:13:32 +00:00
Dave Wysochanski
71e41d9139 Make destroy_toolcontext() better able to handle NULL pointers.
Part of twoerner's log_error() patches.

Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-08 18:12:08 +00:00
Dave Wysochanski
4c35d6dee6 Remove unneeded LOCK_NONBLOCKING from vg_read() API.
Remove unneeded LOCK_NONBLOCKING from vg_read() API and tools that
use it.  We no longer need this flag anywhere since we now automatically
set LCK_NONBLOCK inside lock_vol() if vgs_locked().
For further details, see:
commit d52b3fd3fe
Author: Dave Wysochanski <dwysocha@redhat.com>
Date:   Wed May 13 13:02:52 2009 +0000

    Remove NON_BLOCKING lock flag from tools and set a policy to auto-set.

    As a simplification to the tools and further liblvm, this patch pushes
    the setting of NON_BLOCKING lock flag inside the lock_vol() call.
    The policy we set is if any existing VGs are currently locked, we
    set the NON_BLOCKING flag.

At some point it may make sense to add this flag back if we get an
RFE from a liblvm user, but for now let's keep it as simple as
possible.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-08 14:33:17 +00:00
Dave Wysochanski
b251e09035 Remove READ_CHECK_EXISTENCE and vg_might_exist().
Remove READ_CHECK_EXISTENCE and vg_might_exist().
This flag and API is no longer used now that we have a separate
API to check for existence.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-08 14:31:17 +00:00
Dave Wysochanski
cd082bbea7 Remove unneeded LOCK_KEEP from vg_read() interface.
Remove unneeded LOCK_KEEP from vg_read() interface.
Update comment to clarify cases where _vg_lock_and_read() may return
with an error but the lock held.  Would be nice to make the vg_read()
interface consistent with regards to lock held and error behavior.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2009-07-08 14:28:30 +00:00
Alasdair Kergon
dd1d42d5d0 Permit several segment types to be registered by a single shared object. 2009-07-08 12:36:01 +00:00
Mike Snitzer
3d425215a8 Continue to make --units and --size consistent (in code and man pages):
Update units_to_bytes() to support (S)ectors: 500 bytes.
- 500 byte (S)ectors is of questionable value but it adds to consistency
  if a user happens to use --units S.  This seems better than an error.

Updated test/t-covercmd.sh to test --units [hS]

Document the units that can be displayed via --units uniformly.
- (p)etabytes and (e)xabytes were missing in pvs, vgs and lvs man pages.

Made lvreduce man page "... in units of megabytes." consistent (with the
lvextend and lvresize man pages).
2009-07-07 19:28:57 +00:00
Mike Snitzer
bb6a3a9608 Use the MD device's stripe-width, instead of chunk_size, to align the
data blocks of a Physical Volume that is placed directly upon an MD
device.
2009-07-06 19:04:24 +00:00
Dave Wysochanski
b91eb158d4 Don't segfault in vg_release when vg->cmd is NULL.
Sun May  3 13:06:14 CEST 2009  Petr Rockai <me@mornfall.net>
  * Don't segfault in vg_release when vg->cmd is NULL.


Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
2009-07-01 17:03:38 +00:00
Dave Wysochanski
13e8c7e434 Rework the toollib interface (process_each_*) on top of new vg_read.
Sun May  3 12:32:30 CEST 2009  Petr Rockai <me@mornfall.net>
  * Rework the toollib interface (process_each_*) on top of new vg_read.

Rebased 6/26/09 by Dave W.
- Add skipping message to process_each_lv
- Remove inconsistent_t.
2009-07-01 17:00:50 +00:00
Alasdair Kergon
476d463348 pre-release tidy up 2009-06-30 18:39:31 +00:00
Milan Broz
6391d03f54 Fix backward compatibility for major:minor query.
Is an application uses query and set major:minor
to device, it should not fallback to default major by default.

Add new function whoich allows that (and use it in lvm2).
2009-06-17 20:55:24 +00:00
Milan Broz
be0938ad3c Properly destroy toolcontext.
(fixes previous commit)
2009-06-17 20:54:20 +00:00
Milan Broz
38ddfe7be5 Fix memory leaks in toolcontext error path.
E.g.
 # vgscan
  Parse error at byte 2360 (line 54): expected a value
  Failed to load config file /etc/lvm/lvm.conf
You have a memory leak (not released memory pool):
 [0x818c788] library (12 bytes)

...
2009-06-15 11:56:31 +00:00
Milan Broz
5cc66af8d6 Re-instate partial activation support in clustered mode. (mornfall) 2009-06-12 08:30:19 +00:00
Petr Rockai
11ee855e40 Allow metadata correction even when PVs are missing. 2009-06-10 20:17:32 +00:00
Dave Wysochanski
fe2b3ea0d4 In the new _vg_read_for_update(), we always do the check for CLUSTERED vg
status flag after reading the volume group.  Thus, no need to set the flag
in vg_read() or clear it later before calling _vg_bad_status_bits().

Also, add back in the !lockingfailed() as part of the CLUSTERED flag check.
It's unclear why it was removed when the check was moved from
_vg_bad_status_bits() to inside _vg_lock_and_read().
There was an open question about the last check in the 'if' stmt for
lockingfailed() with a previous patch submitted.  However, I would
defer that right now as it is a separate item and this patch should
be no functional change by including the !lockingfailed().

Petr acked this patch on 5/26 I just forgot to check it in.

Acked-by: Petr Rockai <prockai@redhat.com>
2009-06-10 16:14:40 +00:00
Dave Wysochanski
07b0c948ee Add vg_lock_newname() library function.
Various tools need to check for existence of a VG before doing something
(vgsplit, vgrename, vgcreate).  Currently we don't have an interface to
check for existence, but the existence check is part of the vg_read* call(s).
This patch is an attempt to pull out some of that functionality into a
separate function, and hopefully simplify our vg_read interface, and
move those patches along.

vg_lock_newname() is only concerned about checking whether a vg exists in
the system.  Unfortunately, we cannot just scan the system, but we must first
obtain a lock.  Since we are reserving a vgname, we take a WRITE lock on
the vgname.  Once obtained, we scan the system to ensure the name does
not exist.  The return codes and behavior is in the function header.
You might think of this function as similar to an open() call with
O_CREAT and O_EXCL flags (returns failure with -EEXIST if file already
exists).

NOTE: I think including the word "lock" in the function name is important,
as it clearly states the function obtains a lock and makes the code more
readable, especially when it comes to cleanup / unlocking.  The ultimate
function name is somewhat open for debate though so later we may rename.
2009-06-09 14:29:10 +00:00
Milan Broz
a908d0030c Suspend virtual origin before real snapshot.
Because preload of table for snapshot can produce snapshot
metadata (in kernel cow header) read.

Code should suspend origin first to avoid possible deadlock
when preloading (thus calling snapshot in-kernel constructor)
for origin with suspended cow device.

(fixes previous commit)
2009-06-06 16:37:15 +00:00
Milan Broz
66086ce962 Fix double releasing of vg when repairing of vg is requested.
Several commands calls process_each_vg() and in provided
callback it explicitly recovers VG if inconsistent.
(vgchange, vgconvert, vgscan)

It means that old VG is released and reread  but the function
above (process_one_vg) tries to unlock and release old VG.

Patch moves the repair logic into _process_one_vg() function.

It always tries to read vg (even inconsistent) and then decides
what to do according new defined parameter.

Also patch unifies inconsistent error messages.

The only slight change if for vgremove command, where
it now tries to repair VG before it removes if force arg is given.
(It works similar way before, just the order of operation changed).
2009-06-05 20:00:52 +00:00
Milan Broz
c26488d348 Use lvconvert --repair instead of vgreduce in mirror dmeventd DSO (mornfall)
Introduce lvconvert --use_policies (mornfall)
2009-06-04 12:01:15 +00:00
Milan Broz
b6deac338f Build shared parts with 'make' command (mpatocka)
When some parts of lvm are built as shared libraries (for example with
--with-snapshots=shared), the 'make' command does not build these parts.
The shared parts are built with 'make install' command.

This bug can be seen if you go to 'lib' subdirectory and type 'make'.
If you type 'make', the shared libraries are not built, if you type
'make all', the shared libraries are built.

The reason for the bug is the line $(SUBDIRS): $(LIB_STATIC)
If make is executed without any arguments, it makes the first target
in the Makefile. If the first target is '$(SUBDIRS): $(LIB_STATIC)',
it only builds static libraries.

This patch moves '$(SUBDIRS): $(LIB_STATIC)' after
include $(top_srcdir)/make.tmpl. make.tmpl contains the 'all' target
as its first target, so 'make' will be equivalent to 'make all' and
shared libraries will be build with 'make' command.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2009-06-03 11:31:06 +00:00
Milan Broz
771e191e99 Fix rename of active snapshot with virtual origin.
Code must suspend/resume virtual origin too when renaming
snaphsot otherwise in kernel old name remains.
2009-06-01 15:55:06 +00:00
Milan Broz
31f55a07db Fix convert polling to ignore LV with different UUID.
When mirror convert polling is started (mainly as backgound process,
in lvchange -a y or in lvconvert itself) it tries to read VG
and LV identified by its name.

Unfortunatelly, the VG can have already different LV under the same name,
and various more or less funny things can happen (note that
_finish_lvconvert_mirror suspends the volume for example).

(the typical example is our testing script which continuously recreates
LVs under the same name in the same VG.)

This patch adds optional uuid parameter which helps to properly
select the monitoring object. For lvconvert polling it is set to LV UUID
and both _get_lvconvert_vg and _get_lvconvert_lv uses it to read proper VG/LV.

(In the pvmove case it is NULL, here we poll for physical volume name).
2009-06-01 14:43:27 +00:00
Milan Broz
59d06d4dc7 Fix log allocation segfault (fix previous commits).
If there is no free area for log, code should break the loop.
(Otherwise it uses uninitializes areas later.)

Easily reproducible using lvconvert --repair
 - kill device with log
 - run lvconvert --repair vg/lv (with no PV usable for log)
2009-06-01 14:23:38 +00:00
Milan Broz
c1fdeec999 Fix readahead calculation problems.
During vgreduce is failed mirror image replaced with error segment,
this segmant type has always area_count == 0.
Current code expects that there is at least one area with device,
patch fixes it by additional check (fixes segfault during vgreduce).

Also do not calculate readahead in every lv_info call, we only need
to cache PV readahead before activation calls which locks memory.
2009-06-01 12:43:31 +00:00
Alasdair Kergon
eca971ca6c Remove verbose 'visited' messages. 2009-05-30 01:54:29 +00:00
Alasdair Kergon
5cffbf0bb0 Handle multi-extent mirror log allocation when smallest PV has only 1 extent. 2009-05-30 00:09:27 +00:00
Alasdair Kergon
5746e2e769 When creating new LV, double-check that name is not already in use. 2009-05-28 01:59:37 +00:00
Alasdair Kergon
ca51e5d9ec Remove /dev/vgname/lvname symlink automatically if LV is no longer visible. 2009-05-28 01:11:29 +00:00
Alasdair Kergon
ea0e5e6ea8 Rename internal vorigin LV to match visible LV. 2009-05-28 00:29:14 +00:00
Alasdair Kergon
99113cc588 Suppress 'removed' messages displayed when internal LVs are removed.
Fix lvchange -a and -p for sparse LVs.
Fix lvcreate --virtualsize to activate the new device immediately.
2009-05-27 18:19:21 +00:00
Alasdair Kergon
ea91a71bb9 Fix counting of virtual origin LVs in vg_validate. (mbroz) 2009-05-27 13:19:34 +00:00
Alasdair Kergon
4884e0e217 Attempt to load dm-zero module if zero target needed but not present. (mbroz) 2009-05-27 13:05:53 +00:00
Alasdair Kergon
25a2e7b80e Pre-release cleanups. 2009-05-21 03:04:52 +00:00
Milan Broz
6ac30c94f2 Fix locking query compatibility with old external locking libraries. 2009-05-20 12:58:03 +00:00
Milan Broz
d396100278 Use readahead of underlying device and not default (smaller) one.
When we are stacking LV over device, which has for some reason
increased read_ahead (e.g. MD RAID), the read_ahead hint
for libdevmapper is wrong (it is zero).

If the calculated read_ahead hint is zero, patch uses read_ahead of underlying device
(if first segment is PV) when setting DM_READ_AHEAD_MINIMUM_FLAG.

Because we are using dev-cache, it also store this value to cache for future use
(if several LVs are over one PV, BLKRAGET is called only once for underlying device.)

This should fix all the reamining problems with readahead mismatch reported
for DM over MD configurations (and similar cases).
2009-05-20 11:09:49 +00:00
Milan Broz
a01e55b6ec Use lock query instead of activate_lv_excl
- switch lvremove to not force activate volume when removing
 - ditto for force resync

 - fix some wrong return codes in lvchange_resync()
2009-05-20 09:55:33 +00:00
Milan Broz
eb91c4eee3 Use suspend with flush when device size was changed during table preload.
This allows online mirror resize, also removes condition to preventing
code to do this.
2009-05-20 09:52:37 +00:00
Milan Broz
fa6dca9f28 Add infrastructure for queriying for remote locks.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.

Patch adds simple clvmd command which queries all nodes
for lock for given resource.

The lock type is returned in reply in text.

(But code currently uses CR and EX modes only.)
2009-05-19 10:38:58 +00:00
Milan Broz
e1b0dce76e Use PV UUID in hash for device name when exporting metadata.
Currently code uses pv_dev_name() for hash when getting internal
"pvX" name.

This produce corrupted metadata if PVs are missing, pv->dev
is NULL and all these missing devices returns one name
(using "unknown device" for all missing devices as hash key).
2009-05-19 09:48:32 +00:00
Milan Broz
0a5e42897e vgcfgrestore should not quietly fail when backup file has missing PVs.
(fixes previous commit: Fix segfault for vgcfgrestore on VG with missing PVs.)
2009-05-19 09:45:33 +00:00
Milan Broz
970f241c52 Check max_lv on only place and force the check only for new volume.
We can temporarily violate max_lv during mirror conversion etc.

(If the operation fails, orphan mirror images are visible to administrator
for manual remove for example. Not that this should ever happen:-)

Force limit only for lvcreate (and vg merge) command.

Patch also adds simple max_lv tests into testsuite
2009-05-13 21:29:10 +00:00
Milan Broz
82cf926094 Remove unneeded import parameter from lv_create_empty. 2009-05-13 21:28:31 +00:00
Milan Broz
afd9ba98c1 Merge lv_is_displayable and lv_is_visible.
Displayable and visible is the same thing.

volumes_count(vg) is now vg_visible_lvs() and always
returns number of LVs from user perspective.
2009-05-13 21:27:43 +00:00
Milan Broz
59d8429cb3 Introduce lv_set_visible & lv_set_invisible and use lv_is_visible always.
The vg->lv_count parameter now includes always number of visible
logical volumes.

Note that virtual snapshot volume (snapshotX) is never visible,
but it is stored in metadata with visible flag.
2009-05-13 21:26:45 +00:00
Milan Broz
b14c5af76d Fix lv_is_visible to handle virtual origin.
Snapshot is visible if its origin is marked visible,
or if the origin is virtual.
2009-05-13 21:25:45 +00:00
Milan Broz
0b706ac672 Introduce link_lv_to_vg and unlink_lv_from_vg functions.
link_lv_to_vg and unlink_lv_from_vg are the only functions
for adding/removing logical volume from volume group.

Only these function should manipulate with vg->lvs list.
2009-05-13 21:25:01 +00:00
Milan Broz
494b4cec7b Tidy format1 import LV function.
Later patch initializes lv->vg after the LV structure is prepared,
so pass through cmd context and do not use vg->cmd here.
Also move LV id calculation (which uses lv->vg too).

Also properly free memory pool if operation fails.
2009-05-13 21:24:12 +00:00
Milan Broz
d60f341d96 Remove vg->lv_count and use counter function.
This should not cause problems but simplifies code a lot.

(the volumes_count is merged and renamed with lvs_visible
function by following patch.)
2009-05-13 21:22:57 +00:00
Milan Broz
4b13d5a823 Fix snapshot segment import to not use duplicate segments & replace.
The snapshot segment (snapshotX) is created twice
during the text metadata segment processing.

This can cause temporary violation of max_lv count.

Simplify the code, snapshot segment is properly initialized
in init_snapshot_seg function now and do not need to be replaced
by vg_add_snapshot call.

The vg_add_snapshot() is now usefull only for adding new
snapshot and it shares the same initialization function.

The snapshot name is always generated, name paramater can be
removed from function call.
2009-05-13 21:21:58 +00:00
Zdenek Kabelac
cfebc626b6 Do not query nonexistent devices for readahead. 2009-05-13 14:13:54 +00:00
Dave Wysochanski
5a820745ce Remove NON_BLOCKING lock flag from tools and set a policy to auto-set.
As a simplification to the tools and further liblvm, this patch pushes
the setting of NON_BLOCKING lock flag inside the lock_vol() call.
The policy we set is if any existing VGs are currently locked, we
set the NON_BLOCKING flag.

Should be no functional change.
2009-05-13 13:02:52 +00:00
Alasdair Kergon
b44e3bdc86 better variable name for snapshot counting 2009-05-13 01:48:18 +00:00
Milan Broz
2f9a9d1a7f Remove snapshot_count from VG and use function instead. 2009-05-12 19:12:09 +00:00
Milan Broz
920e68d603 Fix first_seg() call for empty segment list.
The seg variable is temporary variable for list iterator,
code cannot expect that after iteration it remains NULL
(it contains non-NULL pointer here id list is empty).

Patch fixes first_seg function so it now correctly returns NULL
for empty segment list.
2009-05-12 19:09:21 +00:00
Milan Broz
5c93cdba2d Fix PV datalign when for values starting prior to MDA area.
The dataalign value must always be aligned according
to MDA area.
The currect code checks if calculated value collides with
MDA area but not if the value is so small that it is
located before MDA starts.

Unfortunatelly there can be also MDA in the end of the device.

The patch adds simple check to avoid this miscalculation.
Patch expects that first MDA always starts on <= pagesize boundary
(this is true for all allowed label sector parameters).
2009-05-07 12:11:50 +00:00
Milan Broz
610646095b Use zalloc in initialization of device manager (to zero pvmove mirror count). 2009-05-07 12:01:21 +00:00
Dave Wysochanski
14f5aa2753 Update columns.h comment. 2009-05-06 15:25:23 +00:00
Dave Wysochanski
e08ad14696 Fix error path in vg_make_handle().
Enter the error condition if either of the allocations fail, and
don't use dm_pool_zalloc if dm_pool_create fails.
2009-04-28 17:46:47 +00:00
Alasdair Kergon
87f42fda5e Add sparse devices: lvcreate -s --virtualoriginsize (hidden zero origin).
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.

Still a few rough edges, but hopefully usable now:
  lvcreate -s vg1 -L 100M --virtualoriginsize 1T
2009-04-25 01:17:59 +00:00
Milan Broz
bf3423d355 Fix pool leak in lvmcache_read_vg error path.
(Introduced in previous patches.)
2009-04-24 12:03:55 +00:00
Petr Rockai
e1ea382999 A more thorough PV equality test (that also copes better with MISSING_PVs) in
_is_mirror_image_removable.
2009-04-23 16:43:01 +00:00
Petr Rockai
eeadae1b6a Do not include MISSING_PVs in allocation maps. 2009-04-23 16:41:27 +00:00
Dave Wysochanski
d85cf5d14d Update columns.h comment to describe macro args. 2009-04-23 16:27:58 +00:00
Milan Broz
dfbc015c69 Fix remote metadata backup for clvmd
Run backup of metadata on remote nodes in the
same place like local node - when calling backup().

Introduce backup_locally() which calls only
local backup if needed.

Remote backup is now trigerred by LCK_VG_BACKUP flag
combination (special VG lock).

This lock type will call check_current_backup()
(including backup_locally() call) and updates
metadata on all nodes.

(Patch fixes non-functional remote backup,
current call during VG lock never triggers.)
2009-04-22 09:39:45 +00:00
Milan Broz
e5656d86d2 Alloc PV internal structure from VG mempool if possible. 2009-04-22 09:31:30 +00:00
Milan Broz
8f3fd69ffa Move metadata backup call after vg_commit.
The backup() call store metadata from memory.

But in cluster backup() call performs
remote nodes metadata backup and it reads data from disk.

For metadata backup consistency,
patch moves all backup() calls after vg_commit.

(Moreover, some tools already do that this way.)
2009-04-21 14:31:57 +00:00
Milan Broz
81c7482974 Fix pvs -a for segmented output
# pvs -a -o devices
   Volume group name (null) has invalid characters
   Skipping volume group (null)

...
_pvsegs_sub_single creates fake vg, we need to check
that pv is real here.
2009-04-21 12:57:31 +00:00
Milan Broz
1cc75dfb53 Add MMC device type to filters. 2009-04-16 10:16:14 +00:00
Milan Broz
405366fd48 Properly release VG memory pool in metadata manipulation code. 2009-04-10 10:01:08 +00:00
Milan Broz
fc310448c0 Properly release VG memory pool in archiver code. 2009-04-10 10:00:37 +00:00
Milan Broz
095bbca691 Properly release VG memory pool in activation code and clvmd. 2009-04-10 10:00:04 +00:00
Milan Broz
8e1d5615b4 Introduce memory pool per volume group.
Since now, all code reading volume group is responsible for releasing
the memory allocated by calling vg_release(vg).
(For simplicity of use, vg_releae can be called for vg == NULL,
the same logic like free(NULL)).

Also providing simple macro for unlocking & releasing in one step,
tools usualy uses this approach.

The global memory pool (cmd->mem) should be used only for global
physical volume operations.

This patch have to be applied with all subsequent patches to complete
memory pool per vg logic.

Using separate memory pool has quite bit memory saving impact when
using large VGs, this is mainly needed when we have to use
preallocated and locked memory (and should not overflow from that
memory space).
2009-04-10 09:59:18 +00:00
Milan Broz
6fe905c705 Properly copy the whole pv structure for later use.
The all_pvs list, used in vg_read, should make its own private
copy of pv structures, otherwise (when vg will use its own pool)
it will point to released memory pool.
The same applies for get_pvs() call.

Patch adds pv_list copy helper and adds explicit memory pool
parameter into _copy_pv.

(Please note that all these helper functions cannot guarantee that
vg related fields are valid - proper vg read & lock must be used
if it is requested.)
2009-04-10 09:56:00 +00:00
Milan Broz
6ce8f8d553 Fix mirror log convert validation question. 2009-04-10 09:53:42 +00:00
Milan Broz
e24f357c23 Fix memory pool leak.
Call the alloc_destory call always after finishing operation
with handle otherwise it will leak a memory pool.

Also fix return code in lv_extend.
2009-04-07 10:20:28 +00:00
Takahiro Yasui
2691077d90 Save and restore the previous logging level when log level is changed. 2009-04-02 21:34:41 +00:00
Takahiro Yasui
e69246e1b7 Fix error message when archive initialization fails. 2009-04-02 20:46:11 +00:00
Milan Broz
ec5703ea07 Allocate new pv->vg_name from pool, it can be destroyed later.
(The mempool rename will be used later by vg private mempools)
2009-04-02 15:01:11 +00:00
Milan Broz
aa8111b3cd fix some issues when compiling with -D DEBUG_POOL
- fix compilation issues
- fix wrong pool object maipulation (lvm dumpconfig triggers assert)
- second iteration in loop _log_parallel_areas operates on non-existing object
2009-03-26 09:25:18 +00:00
Milan Broz
0ef8308f1b Fix segfault for vgcfgrestore on VG with missing PVs. 2009-03-24 13:16:34 +00:00
Takahiro Yasui
fbd97a3425 Restore log_suppress state when metadata backup file is up-to-date.
Author: Takahiro Yasui <tyasui@redhat.com>
2009-03-23 22:57:27 +00:00
Takahiro Yasui
6a8feb3c26 Fix size and error message of memory allocation at backup initialization.
Author: Takahiro Yasui <tyasui@redhat.com>
2009-03-23 21:56:32 +00:00
Takahiro Yasui
1d13e51826 Fix error message when adding metadata directory to internal list fails.
Author: Takahiro Yasui <tyasui@redhat.com>
2009-03-23 21:13:37 +00:00
Petr Rockai
1b2e147cc8 Missed file from previous checkin. 2009-03-17 14:40:00 +00:00
Petr Rockai
3402ccd488 Detect and wipe swap signatures in pvcreate. 2009-03-17 13:59:56 +00:00
Milan Broz
7f436a0f39 Fix lv_count when manipulating with snapshots and max_lv is set.
Patch fixes these problems:
 - during the snapshot creation process, it needs create 2 LVs,
   one is cow, second becomes snapshot.
   If the code fails in vg_add_snapshot, code lvcreate will not remove
   LV cow volume.

 - if max_lv is set and VG contains snapshot, it can happen that
   during the activation lv_count is temporarily increased over the limit
   and VG metadata are not properly processed
   see https://bugzilla.redhat.com/show_bug.cgi?id=490298

 - vgcfgrestore alows restore with max_lv set to lower valuer that actual
   LV count. This later leads to situation that max_lv is completely ignored.

 - vgck doesn't call vg_validate(). It should at least try:-)

Signed-off-by: Milan Broz <mbroz@redhat.com>
2009-03-16 14:34:57 +00:00
Dave Wysochanski
47e1baf1e4 Fix error messages when PV uuid or pe_start reading fails.
Author: Takahiro Yasui <tyasui@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
2009-03-09 15:42:10 +00:00
Dave Wysochanski
227301e041 Move lvm.h from lib to liblvm. 2009-03-06 22:49:48 +00:00
Dave Wysochanski
e0c64c6c35 Add new liblvm build directory and move lvm_base.c.
The original liblvm.a has been moved to liblvm-internal.a.
We now use liblvm.a for the new application library and build
it inside liblvm directory.

Change dependencies so tools depend on liblvm application library,
and application library depends on liblvm internal.
2009-03-06 16:19:52 +00:00
Dave Wysochanski
0bf8455b64 Rename liblvm to liblvm-internal.
Make preparation for using liblvm for new application library.
2009-03-06 16:17:28 +00:00