IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When metadata LV size was over DM_THIN_MAX_METADATA_SIZE sectors,
the info() routine was incorrectly trying to match bigger size,
while we do never pass any bigger device.
Fixing a case, where lvs should be displaying status for metadata
LV with 16GB size.
Reshape check failed when regionsize changed and current raid type
was provided with no other change requested (stripes or stripesize).
E.g. "lvconvert --type raid6 --regionsize 256K" on a raid6 LV
with != 256K regionsize.
Enable --type in test script.
Use only selected paths for finding .so in builddir.
So if builddir constains some embeded subdirs with some more
occurences of project (i.e. 'make rpm' build subdir)
those library paths will not get into list.
lvconvert should not leak 'error' device.
(This patch is not fix the problem, just makes it more easily visible
instead of more confusing 'clvmd' trace).
Since we want to test different cache policies with profiles mq&smq
raise version to 1.8.
TODO: maybe split in more tests so older targets can test here as well.
N.B.: passthrough is also not supported with version 1.3
If SubLVs to be removed still exist after an image removing
conversion (i.e. "lvconvert --yes --force --stripes N "
with N < total stripes) any request to convert to a different
striped/raid* level has to be rejected until after those freed
SubLVs got removed by running the aforementioned lvconvert again.
Add tests to check conversion to striped/raid* gets rejected.
Enhance a test comment.
Related: rhbz1191935
Related: rhbz1366296
Adjust to final target version 1.10.1 supporting reshape
properly and to recently changed report field specifications
(e.g. rehape_len_le) to allow these tests to run.
Lower mirror region size to suite the tiny test VG.
Splitting off an image LV of a 2-legged
raid1 LV causes loss of resilience.
Ask user to avoid uninformed loss of all resilience.
Don't ask for N > 2 legged raid1 LVs.
Adjust tests.
During an ongoing reshape, the MD kernel runtime reads stripes relative
to data_offset and starts storing the reshaped stripes (with new raid
layout and/or new stripesize and/or new number of stripes) relative
to new_data_offset. This is to avoid writing over any data in place
which is non-atomic by nature and thus be recoverable without data loss
in the transition. MD uses the term out-of-place reshaping for it.
There's 2 other areas we don't have report capability for:
- number of data stripes vs. total stripes
(e.g. raid6 with 7 stripes toal has 5 data stripes)
- number of (rotating) parity/syndrome chunks
(e.g. raid6 with 7 stripes toal has 2 parity chunks; one
per stripe for P-Syndrome and another one for Q-Syndrome)
Thus, add the following reportable keys:
- reshape_len (in current units)
- reshape_len_le (in logical extents)
- data_offset (in sectors)
- new_data_offset ( " )
- data_stripes
- parity_chunks
Enhance lvchange-raid.sh, lvconvert-raid-reshape-linear_to_striped.sh,
lvconvert-raid-reshape-striped_to_linear.sh, lvconvert-raid-reshape.sh
and lvconvert-raid-takeover.sh to make use of new keys.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Add aforementioned but forgotten new test scripts
lvconvert-raid-reshape-linear_to_striped.sh,
lvconvert-raid-reshape-striped_to_linear.sh and
lvconvert-raid-reshape.sh
Those presume dm-raid target version 1.10.2
provided by a following kernel patch.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces the changes to call the reshaping infratructure
from lv_raid_convert().
Changes:
- add reshaping calls from lv_raid_convert()
- add command definitons for reshaping to tools/command-lines.in
- fix raid_rimage_extents()
- add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh
and lvconvert-raid-reshape-striped_to_linear.sh to test
the linear <-> striped multi-step conversions
- add lvconvert-raid-reshape.sh reshaping tests
- enhance lvconvert-raid-takeover.sh with new raid10 tests
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The MD kernel raid1 personality does no use any writemostly leg as the primary.
In case a previous linear LV holding data gets upconverted to
raid1 it becomes the primary leg of the new raid1 LV and a full
resynchronization is started to update the new legs.
No writemostly and/or writebehind setting may be allowed during
this initial, full synchronization period of this new raid1 LV
(using the lvchange(8) command), because that would change the
primary (i.e the previous linear LV) thus causing data loss.
lvchange has a bug not preventing this scenario.
Fix rejects setting writemostly and/or writebehind on resychronizing raid1 LVs.
Once we have status in the lvm2 metadata about the linear -> raid upconversion,
we may relax this constraint for other types of resynchronization
(e.g. for user requested "lvchange --resync ").
New lvchange-raid1-writemostly.sh test is added to the test suite.
Resolves: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=855895
When the test would need to try to write some large amount of data
we can give it 'zero' segments - for obvious reason such written data
can't be verified but in some test cases it doesn't really matter.
Usage follows 'error_dev' style.
For now test suite is not supporting any combination of
error/delay/zero segments so only 1 type could be used per PV.
Check 'dmsetup version' is called before starting any more
advanced logic in $DM_DEV_DIR.
Call also replaces mkdir as it creates needed path with control node.
This is a new explicit version of 'lvconvert LV'
which has been an obscure way of triggering polling
to be restarted on an LV that was previously converted.
Lift all the snapshot utilities (merge, split, combine)
out of the monolithic lvconvert implementation, using
the command definitions. The old code associated with
these commands is now unused and will be removed separately.
. Define a prototype for every lvm command.
. Match every user command with one definition.
. Generate help text and man pages from them.
The new file command-lines.in defines a prototype for every
unique lvm command. A unique lvm command is a unique
combination of: command name + required option args +
required positional args. Each of these prototypes also
includes the optional option args and optional positional
args that the command will accept, a description, and a
unique string ID for the definition. Any valid command
will match one of the prototypes.
Here's an example of the lvresize command definitions from
command-lines.in, there are three unique lvresize commands:
lvresize --size SizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat String, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.
lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --resizefs, --stripes Number, --stripesize SizeKB
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.
FLAGS: SECONDARY_SYNTAX
lvresize --poolmetadatasize SizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.
The three commands have separate definitions because they have
different required parameters. Required parameters are specified
on the first line of the definition. Optional options are
listed after OO, and optional positional args are listed after OP.
This data is used to generate corresponding command definition
structures for lvm in command-lines.h. usage/help output is also
auto generated, so it is always in sync with the definitions.
Every user-entered command is compared against the set of
command structures, and matched with one. An error is
reported if an entered command does not have the required
parameters for any definition. The closest match is printed
as a suggestion, and running lvresize --help will display
the usage for each possible lvresize command.
The prototype syntax used for help/man output includes
required --option and positional args on the first line,
and optional --option and positional args enclosed in [ ]
on subsequent lines.
command_name <required_opt_args> <required_pos_args>
[ <optional_opt_args> ]
[ <optional_pos_args> ]
Command definitions that are not to be advertised/suggested
have the flag SECONDARY_SYNTAX. These commands will not be
printed in the normal help output.
Man page prototypes are also generated from the same original
command definitions, and are always in sync with the code
and help text.
Very early in command execution, a matching command definition
is found. lvm then knows the operation being done, and that
the provided args conform to the definition. This will allow
lots of ad hoc checking/validation to be removed throughout
the code.
Each command definition can also be routed to a specific
function to implement it. The function is associated with
an enum value for the command definition (generated from
the ID string.) These per-command-definition implementation
functions have not yet been created, so all commands
currently fall back to the existing per-command-name
implementation functions.
Using per-command-definition functions will allow lots of
code to be removed which tries to figure out what the
command is meant to do. This is currently based on ad hoc
and complicated option analysis. When using the new
functions, what the command is doing is already known
from the associated command definition.
Add:
- region size checks to raid_manip.c types array and supporting functions
- tests to lvconvert-raid-takeover.sh to check bogus
"lvconvert --type --regionsize N " requests
Related: rhbz1366296
Kernel 4.10 (dm-crypt v1.15.0) and later supports loading device
tables with crypt segment having key in kernel keyring retention
service.
dmsetup hid key section of tables output. With this patch dmsetup
no longer hides key section if it detects kernel key description
instead of hex byte representation of key itself.
Add:
- conversion support from striped/raid0/raid0_meta to/from raid10;
raid10 goes by the near format (same as used in creation of
raid10 LVs), which groups data copies together with their original
blocks (e.g. 3-way striped, 2 data copies resulting in 112233 in the
first stripe followed by 445566 in the second etc.) and is limited
to even numbers of legs for now
- related tests to lvconvert-raid-takeover.sh
- typo
Related: rhbz1366296
- support shrinking of raid0/1/4/5/6/10 LVs
- enhance lvresize-raid.sh tests: add raid0* and raid10
- fix have_raid4 in aux.sh to allow lv_resize-raid.sh
and other scripts to test raid4
Resolves: rhbz1394048
Commit cfb6ef654d introduced
support to change RAID region size.
Add:
- missing conditions to support any types to function with
it in lv_raid_convert(); temporary workaround used until
cli validation patches get merged
- tests requesting "-R " to lvconvert-raid-takeover.sh
involving a cleanup of the script
Related: rhbz1392947
Add:
- support to change region size of existing RaidLVs
(all RAID LV types but raid0/raid0_meta)
- lvconvert-raid-regionsize.sh with test variations
for different RAID types and region sizes
Resolves: rhbz1392947
Well waiting for zeroing may take enough time to finish 'raid' sync.
So make the test running faster without zeroing and better avoid race
to have chance to happen (i.e. lvcreate is finished after array
gets already in sync).
Add:
- support for segment types raid6_{ls,rs,la,ra}_6
(striped raid with dedicated last Q-Syndrome SubLVs)
- conversion support from raid5_{ls,rs,la,ra} to/from raid6_{ls,rs,la,ra}_6
- setting convenient segtypes on conversions from/to raid4/5/6
- related tests to lvconvert-raid-takeover.sh factoring
out _lvcreate,_lvconvert funxtions
Related: rhbz1366296
Add:
- support for segment type raid6_n_6 (striped raid with dedicated last parity/Q-Syndrome SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid6_n_6
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
Add:
- support for segment type raid5_n (striped raid with dedicated last parity SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid5_n
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
Since we still experience occasiaonal test failure - slow
things down even more to avoid race.
Add support for 'quick' table changes between normal & delayed tables.
Solves: https://bugzilla.redhat.com/1280496
The only reasonable behaviour here is to error on
any number out of accepted range (i.e. now numbers
wrapping around with some hidden logic).
As this is plain bug there is no support for
backward compatibility since noone should
set numbers >UINT32_MAX and expect 0 or error
depending on how big number was used....
TODO: more fields might need to be converted.
Add to commits 87117c2b25 and 0b8bf73a63 to avoid refreshing two
times altogether, thus avoiding issues related to clustered, remotely
activated RaidLV. Avoid need to repeat "lvchange --refresh RaidLV"
two times as a workaround to refresh a RaidLV. Fix handles removal
of temporary *-missing-* devices created for any missing segments
in RAID SubLVs during activation.
Because the kernel dm-raid target isn't able to handle transiently
failing devices properly we need
"[dm-devel][PATCH] dm raid: fix transient device failure processing"
as well.
test: add lvchange-raid-transient-failures.sh
and enhance lvconvert-raid.sh
Resolves: rhbz1025322
Related: rhbz1265191
Related: rhbz1399844
Related: rhbz1404425
To be able to detect lvm2 command is not leaking some
'unexpected' device - remove all devices before
test exits by its own command so test teardown
now can check what was 'left' unexpectedly.
Use LVM_DBUSD_TEST_MODE env variable to customize what we test.
Default is the same where we try to test all combinations of all
modes. Renamed to make it consistent with the other env variables
that are used in the unit test.
- We check that all properties match the introspection data. We
don't verify values for every property as only lvm knows what they
should be.
- We are testing vg.Move
The default dbus python library mode of operation is to leverage
introspection. However, this introspection data isn't accessible
for users of the library and they have to specifically retrieve
the introspection data too. This resulted in many introspection
calls being made. This change eliminates introspection calls if
we are testing multiple concurrent test clients. If it's a single
client we will leverage a reduced amount of introspection data to
verify the introspection data is correct. Typically clients don't
leverage introspection data nearly as much as this test client.
The env variable LVM_DBUSD_PV_DEVICE_LIST when present and filled in
with at least 4 physical devices will run concurrently with other
instances running as long as they specify different devices in their
env variable.
When the env variable is not present the test runs as it did before.
Looks like this isn't support across versions. Need to add functionality
to service to return the supported segment types, so we only use the
supported ones.
0 interval leads as of now to a busy loop with lvmetad and command.
Avoid testing this patological case.
TODO: Code should possibly translate zero interval into some small
sleep. With lvmpolld it's already 1/10s
Add new targets:
make check_lvmpolld
make check_cluster_lvmpolld
make check_lvmetad_lvmpolld
make check_all_lvmpolld
So check_lvmetad runs only base lvmetad test - to much
logic of remaining targets.
Previous behavior is available via check_all_lvmpolld.
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.
Add related tests to lvconvert-raid-takeover.sh
Resolves: rhbz1388962
On conversions between striped/raid0* and raid4, the kernel expects
the dedicated raid4 parity SubLVs in the first segment area rather than
in the last it's been allocated to, thus the data mapping ain't proper.
Enhance lvconvert (lib/metadata/raid_manip.c) to shift the dedicated
parity SubLVs on conversions from striped/raid0* to raid4 and vice-versa.
In case of raid0_meta -> raid4 where the MD raid0 personality already has
stored RAID array device positions in the superblocks, the MetaLVs have to
be cleared so that the kernel doesn't fail validating the array positions
after lvm has shifted them up by one.
Add more tests to lvconvert-raid-takeover.sh including one to check for
mapping flaws by converting a created raid4 with filesystem -> striped
and fsck it.
Whilst on it:
- add missing direct striped -> raid4 conversion to the takeover array
to avoid an intermim conversion from striped -> raid0*
- clean up the takeover array
- allow lvconvert to actually call lv_raid_convert() on all takeover requests
in order to check parameters and display messages provided by takeover
functions rather than just "...not supported" from within lvconvert
- fix a typo
Resolves: rhbz1386148
This test never passes on loop back, so we will skip unless the
pv devices are real devices which contain `/dev/sd`.
We always fail because we need lvm to run slow to get a timer to
pop, and loopback are too fast.
If you run multiple runs of unittest.main, unless you don't pass exit=true
the test case always ends with a 0 exit code. Add ability to store the
result of each invocation of the test and exit with a non-zero exit code
if anyone of them fail.
Fix missing wait so we have paired waiting.
Also 'wait' for precise PID to get 'exit' code.
Test for 'error' replacing only with newer snapshot targets.
The old one will wait for resume.
Note: 'wait -n' is not always available so can't be used..
Pre 1.9 dm-raid targets status output was racy, which caused
the device status chars to be unreliable _during_ synchronization.
This shows paritcularly with tiny test devices used.
Enhance lvchange-rebuild-raid.sh to not check status
chars _during_ synchronization. Just check afterwards.
Though I'm not quite sure why we push this limit on user,
current --repair logic requires user to wait outside of command.
TODO: I'm not quite sure this repair logic is 'the most wanted'.
The dm-raid target now rejects device rebuild requests during ongoing
resynchronization thus causing 'lvconvert --repair ...' to fail with
a kernel error message. This regresses with respect to failing automatic
repair via the dmeventd RAID plugin in case raid_fault_policy="allocate"
is configured in lvm.conf as well.
Previously allowing such repair request required cancelling the
resynchronization of any still accessible DataLVs, hence reasoning
potential data loss.
Patch allows the resynchronization of still accessible DataLVs to
finish up by rejecting any 'lvconvert --repair ...'.
It enhances the dmeventd RAID plugin to be able to automatically repair
by postponing the repair after synchronization ended.
More tests are added to lvconvert-rebuild-raid.sh to cover single
and multiple DataLV failure cases for the different RAID levels.
- resolves: rhbz1371717
Commit 199697accf rerouted funtion
for priting cache volume origin to lvm2app app function - which
however had a bug. So restore the original functionality
and print correct LV as cache origin LV.
Because of the different code paths we need to test job handling with
all operations. Test now runs virtually everything with timeout == 0
and timeout == 15 so that we test both use cases.
Note: If a client passes -1 for the timeout value they need to make
sure that their connection time out is also infinite. Otherwise, if the client
times out the service side hangs any new dbus calls until the job
that is in progress completes. Not sure why this behavior is occuring
at this time, but it appears a limitation/bug of the dbus-python library.
The methods were returning an instance of the object instead of the
object path which was causing an exception when the result was returned
with the job object as we are explicity trying to return an object path.
Unit test added which re-creates the issue and verifies the fix.
Add simple helper/wrapper check function to check result
of dmsetup call i.e.:
check grep_dmsetup table vg-lv "grep_expected"
check grep_dmsetup status vg-lv -v "grep_unexpected"
Correction for aux test result ([] -> if;then;fi)
Use issue_discard to lower memory demands on discardable test devices
Use large devices directly through prepare_pvs
I'm still observing more then 0.5G of data usage through.
Particullary:
'lvcreate' followed by 'lvconvert' (which doesn't yet support --nosync
option) is quite demanging, and resume returns quite 'late' when
a lot of data has been already written on PV.
Reinstantiate reporting of metadata percent usage for cache volumes.
Also show the same percentage with hidden cache-pool LV.
This regression was caused by optimization for a single-ioctl in
2.02.155.
Allow RAID scrubbing on cache origin sub-LV
This patch adds the ability to perform RAID scrubbing on the cache
origin sub-LV (https://bugzilla.redhat.com/1169495). Cache origin
operations are restricted to non-clustered RAID LVs until there can
be further testing in a cluster (even for exclusive activation).
User can either specify directly _corig LV
or he can specify cache LV and operation --syncation is
passed ONLY to _corig LV.
If users wants to manipulation with cache-pool devices - he
needs to specify this object name.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
- Prevent --lvmshell with --nojson, not a valid combination
- If user is preventing json, then no lvmshell usage
- Return boolean on Manager.UseLvmShell
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).
When user is aware of related possible troubles he
may increase the limit in lvm.conf.
Also verbosely inform user about possible solution.
Code works for both lvcreate and lvconvert.
Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
'pvmove -n name pv1 pv2' called with the name of a top-level LV
failed with mentioned commit.
Enhance pvmove-raid-segtypes.sh to test for prohibited RAID SubLV moves.
RAID6 LVs may not be created with --nosync or data corruption
may occur in case of device failures. The underlying MD raid6
personality used to drive the RaidLV performs read-modify-write
updates on stripes and thus relies on properly written parity
(P and Q Syndromes) during initial synchronization.
Once on it, enhance test to create/extend more and
larger RaidLVs and check sync/nosync status.
Commit 76ef2d15d8 introduced
raid0 <-> raid4 takeover and full mirror <-> raid1 support.
Add tests for these conversions.
Tests exposed a kernel semantics change freezing resynchronization
on conversions from raid0[_meta] -> raid4 or adding raid1 legs
because kernel kept the RAID mapped device in 'frozen' state unless
an 'idle' message was sent or the table was reloaded (kernel patch pending).
The MD raid6 personality being used to drive lvm raid6 LVs does
read-modify-write updates to any stripes and thus relies on correct
P and Q Syndromes being written during initial synchronization or
it may fail reconstructing proper user data in case of SubLVs failing.
We may not allow the '--nosync' option on
creation of raid6 LVs for that reason.
Update/fix 'man lvcreate' in that regard.
add lvcreate-raid-nosync.sh test script.
- Resolves rhbz1358532
'lvchange --resync LV' or 'lvchange --syncaction repair LV' request the
RAID layout specific parity blocks in raid4/5/6 to be recreated or the
mirrored blocks to be copied again from the master leg/copy for raid1/10,
thus not allowing a rebuild of a particular PV.
Introduce repeatable option '--[raid]rebuild PV' to allow to request
rebuilds of specific PVs in a RaidLV which are known to contain corrupt
data (e.g. rebuild a raid1 master leg).
Add test lvchange-rebuild-raid.sh to test/shell doing rebuild
variations on raid1/10 and 5; add aux function check_status_chars
to support the new test.
- Resolves rhbz1064592
Reduce number of evualted pvcreate commands.
Since 0 is default value used to fill missing params,
and 0 is also 1st. value in array, it's being tested.
Drop unused data_alignment_offset.
When logging to epoch files we would like to prevent creating too large
log files otherwise a spining command could fulfill available space
very easily and quickly.
Limit for to 100000 per command.
TODO: it might be better to log dmeventd messages with test output
just like we do with clvmd - maybe we will switch to this one
instead of extra DMEVENTD log file in future....
Add config for mkfs to get more predicatable results
when using mkfs across variety of distributions.
In future maybe use this per all tests as default.
For now user has to specify in a test MKE2FS_CONFIG envvar to use it.
When force removing thin-pool we loose 'real' access to hidden device,
and if such pool is in suspended state, any thin volume cannot be
dropped. It likely should be also checked by dmsetup, but meanwhile
apply simple logic - try to force remove first all higher minors first
with assumption we first create thin-pool and then thin volume
and there are usually not being released lower dm numbers to
get the order wrong.
This patch fixes link validation for used thin-pool.
Udev rules correctly creates symlinks only for unused new thin-pool.
Such thin-pool can be used by foreing apps (like Docker) thus
has /dev/vg/lv link.
However when thin-pool becomes used by thinLV - this link is no
longer exposed to user - but internal verfication missed this
and caused messages like this to be printed upon 'vgchange -ay':
The link /dev/vg/pool should have been created by udev but it was not
found. Falling back to direct link creation.
And same with 'vgchange -an':
The link /dev/vg/pool should have been removed by udev but it is still
present. Falling back to direct link removal.
This patch ensures only unused thin-pool has this link.
Add new logic to identify each unique operation and route
it to the correct function to perform it. The functions
that perform the conversions remain unchanged.
This new code checks every allowed combination of LV type
and requested operation, and for each valid combination
calls the function that performs that conversion.
The first stage of option validation which checks for
incompatible combinations of command line options, is done
done before process_each is called. This is unchanged.
(This new code will allow that first stage validation to
be simplified in a future commit.)
The second stage of checking options against the specific
LV type is done by this new code. For each valid combination
of operation + LV type, the new code calls an existing
function that implements it.
With this in place, the ad hoc checks for valid combinations
of LV types and operations can be removed from the existing
code in a future commit.
(The #if 0 is used to keep the patch clean, and the
disabled code will be removed by a following patch.)
When we test Vg.LvCreateRaid some of the hidden LVs volume type go from
'I' to 'i' between the time it takes us to create the LV and
the time it takes to call into refresh to verify the service is up to date.
This is a fairly rare occurance.
This refactors the code for autoactivation. Previously,
as each PV was found, it would be sent to lvmetad, and
the VG would be autoactivated using a non-standard VG
processing function (the "activation_handler") called via
a function pointer from within the lvmetad notification path.
Now, any scanning that the command needs to do (scanning
only the named device args, or scanning all devices when
there are no args), is done first, before any activation
is attempted. During the scans, the VG names are saved.
After scanning is complete, process_each_vg is used to do
autoactivation of the saved VG names. This makes pvscan
activation much more similar to activation done with
vgchange or lvchange.
The separate autoactivate phase also means that if lvmetad
is disabled (either before or during the scan), the command
can continue with the activation step by simply not using
lvmetad and reverting to disk scanning to do the
activation.
Add support for active cache LV.
Handle --cachemode args validation during command line processing.
Rework some lvm2 internal to use lvm2 defined CACHE_MODE enums
indepently on libdm defines and use enum around the code instead
of passing and comparing strings.
For raid1 use chunksize as bitmap-chunk specification.
Always enforce usage of bitmap - getting comparable outcome
as lvm2 raid support uses.
Add udev_wait after stopping md array - as in fact leg-device
are still in use by target even command has finished.
(mdadm --stop causes WATCH rule wakeup, and
ioctl(STOP_ARRAY) returns IMHO to early - it should finish
and fsync work on leg devices first).
The test was a weak attempt at verifying the special
combination of lvchange/vgchange -aay --sysinit, but
was only looking for lvmetad connection warnings.
Update the warning checks, and check the LV activation
state directly which is the main point.
Rename the test to reflect its purpose of checking
the -aay --sysinit combination.
Update the check about lvmetad running but not used.
Also add tests related to the new lvmetad disabled state.
lvm1 metadata is used here to test the disabled state
because lvm1 metadata is the first condition using the
disabled state.
Improved test script to verify lost mirror image does not
cause mirror corruption while mirror is in use.
TODO: add more cases (lost mlog...), lost image from 3leg mirror...
- stdout/stderr for test output
- debug.log* for daemon output
- use install instead of cp for DBus config
- use system bus
- DBus reloads on new file. Better having it created with correct
permissions.
Notes:
- Squashed commits from mcsontos development branch
- Still disabled at this time
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Using lvm1 metadata with lvmetad is not generally allowed,
but nothing has prevented creating new lvm1 metadata with
lvmetad (missing error checking in pvcreate/vgcreate.)
Various tests are using lvm1 with lvmetad and happen to
work because of the missing error checks.
This commit fixes the tests so they won't fail when the
lvm1/lvmetad error checking is fixed. A new variable
LVM_TEST_LVM1 is defined and is used in the scripts to
decide if lvm1 metadata should be tested. LVM_TEST_LVM1
is not defined when lvmetad is being tested, and the
combination of LVM_TEST_LVM1 and LVM_TEST_LVMETAD can
be used to verify the desired lvmetad+lvm1 behavior.
Showing 'u' in the pv_attr reporting field is mostly unnecessary because
most PVs are allocatable, and being allocatable implies it is (u)sed,
and this is already obvious from other fields in the default 'pvs'
output like the VG name.
So move the new (u)sed pv_attr from character position 4 to 1, and only
show it in those rare cases when the PV is not (a)llocatable or the
relevant metadata is missing.
(Scripts should not be using pv_attr, but rather pv_allocatable,
pv_exported, pv_missing, pv_in_use etc.)
This simple tool calls the Manager.Refresh method on the dbus service
to check and see if the dbus service has the most up to date state.
This is to be used for testing to ensure that event driven updates are
working as planned.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Add tests for the "dmstats report" command:
* report
* report --count
* report --histogram
So far the tests just check the command runs as expected when a
correctly configured stats region exists: validation of output
can be added later.
Add tests for the "dmstats create" command:
* simple whole-device region
* region using --start/--len options
* region using --segments option
* region with precise timestamps (--precise)
* region with histogram bounds (--bounds)
The install target already depends on .tests-stamp - since this
in turn depends on lib/version-expected there is no need to have
this as a dependency of install.
Add initial dmstats tests to 000-basic.sh. These tests ensure that
the dmsetup binary is built and linked correctly when called as
'dmstats' and that the version of the binary matches the expected
library version used for the build.
export LVMDBUSD_SESSION=True to run on the session bus instead
of the system bus so that we can run the unit test without
installing the dbus conf file.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Reduced the size of LVs created and use actual PE numbers instead of hard
coding them to allow us to work with the loop back devices.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Ask for confirmation when using pvcreate/pvremove on a PV which is
marked as belonging to a VG, just like we do in case of a PV which
belongs to known VG:
$ pvcreate -ff /dev/sda
Really INITIALIZE physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
/dev/sda: physical volume not initialized
$ pvremove -ff /dev/sda
Really WIPE LABELS from physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
/dev/sda: physical volume label not removed
