IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The dm_report_group_output_and_pop_all calls dm_report_output and
dm_report_group_pop for all the items that are currently in report
group. This is just a shortcut that makes it easier to output and
pop group's content so the group handle can be reused again without
a need to initialize and configure it again.
The functionality of dm_report_group_output_and_pop_all is the
same as dm_report_destroy but without destroying the report group
handle.
Calling dm_report_destroy_rows makes it possible to destroy any report
content we have but at the same time it doesn't destroy the report
handle itself, thus it's possible to reuse that handle again for new
report content.
Functionally, this is the same as calling dm_report_output with the
report handle but omitting the output iself. This functionality may
be useful if we, for whatever reason, need to discard the report
content and start a fresh new one but with the same report configuration
and initialization and thus we can just reuse the existing handle.
Add a call to create dmstats regions that correspond to the extents
present in a file descriptor open on a file in a local file system.
The file must reside on a file system type that correctly supports
physical extent location data in the FIEMAP ioctl.
Regions are optionally placed into a group with a user-defined alias.
File systems that do not support physical offsets in FIEMAP (btrfs
currently) are detected via fstatfs() - although attempting to map
a --filemap group on btrfs will fail anyway with the generic error
"Not on a device-mapper device" this is confusing; the file system
mount is on a device-mapper device, but btrfs' volume layer masks
this in the returned st_dev field since the returned logical file
extents may span multiple physical devices.
The call to dm_stats_walk_start() before the do statement makes
dm_stats_walk_do() behave inconsistently depending on context;
wrap them in an additional do { } while (0) so that the macro
always expands to a valid statement.
Make it clear in libdevmapper.h, and in function argument names, that
libdm-stats uses the aux_data field internally and that any values set
for user_data are appended to the library values before being stored
with a region, and similarly, that internal data fields will be stripped
prior to returning any previously stored user_data.
Add support do dm_stats_walk*() to walk over the set of
available groups using the cursor embedded in the dm_stats
handle, and to obtain the type of the object at the current
stats cursor location. A set of flags is introduced to
control which objects are visited:
DM_STATS_WALK_AREA
DM_STATS_WALK_REGION
DM_STATS_WALK_GROUP
DM_STATS_WALK_ALL
A final flag suppresses visits to regions that contain only a
single area - since the aggregate of such a region is idential
to the area it contains this allows these duplicates to be
filtered out:
DM_STATS_WALK_SKIP_SINGLE_AREA
If flags are not initialised before beginning a walk the default
set matches the behaviour of previous versions of the library.
Also accept group identifiers as immediate arguments to the
counter, metric, and property functions by adding control
flags to the region and area identifiers passed in.
Region and area properties are mapped to their equivalents for
the group (for example: group size is reported as the sum of
all regions contained in the group). Counter and metric values
are aggregated for the region or group.
Add a grouping facility to the libdm-stats library that allows the
user to bind several regions together as a group. Groups may be
used to aggregate data from several regions for reporting, or to
select and sort among large sets of regions.
A textual descriptor ("group tag") is associated with each group
and is stored in the first group member's aux_data field. The
tag contains the group member list and an optional alias for the
group, allowing the user to assign meaningful names to groups of
regions.
These descriptors are parsed in @stats_list message responses and
populate the resulting region and area tables with the group
structure.
Groups with overlapping regions are permitted but since this will
result in some events being counted more than once a warning is
printed in this case.
Nested and overlapping groups are not currently supported and
attempting to create these configurations results in error.
Add a new enum based interface for accessing counter and metric
values that uses a single function for each:
uint64_t dm_stats_get_counter(const struct dm_stats *dms,
dm_stats_counter_t counter
uint64_t region_id, uint64_t area_id);
int dm_stats_get_metric(const struct dm_stats *dms, int metric,
uint64_t region_id, uint64_t area_id,
double *value);
This simplifies the implementation of value aggregation for
groups of regions. The named function interface now calls the
enum interface internally so that all new functionality is
available regardless of the method used to retrieve values.
Add a function to parse a list of integer values and ranges into
a dm_bitset representation. Individual values signify that that bit
is set in the resulting mask and ranges are given as a pair of
start and end values, M-N, such that M and N are the first and
last members of the range (inclusive).
The implementation is based on the kernel's __bitmap_parselist()
that is used for cpumasks and other set configuration passed in
string form from user space.
The DM_REPORT_OUTPUT_MULTIPLE_TIMES instructs reporting code to
keep rows even after dm_report_output call - the rows are not
destroyed in this case which makes it possible to call dm_report_output
multiple times.
This patch introduces DM_REPORT_GROUP_JSON report group type. When using
this group type and when pushing a report to such a group, these flags
are automatically unset:
DM_REPORT_OUTPUT_ALIGNED
DM_REPORT_OUTPUT_HEADINGS
DM_REPORT_OUTPUT_COLUMNS_AS_ROWS
...and this flag is set:
DM_REPORT_OUTPUT_BUFFERED
The whole group is encapsulated in { } for the outermost JSON object
and then each report is reported on output as array of objects where
each object is the row from report:
{
"report_name1": [
{field1="value", field2="value",...},
{field1="value", field2="value",...}
...
],
"report_name2": [
{field1="value", field2="value",...},
{field1="value", field2="value",...}
...
]
...
}
This patch introduces DM_REPORT_GROUP_BASIC report group type. This
type has exactly the classical output format as we know from before
introduction of report groups. However, in addition to that, it allows
to put several reports into a group - this is the very basic grouping
scheme that doesn't change the output format itself:
Report: report1_name
Header1 Header2 ...
value value ...
value value ...
... ... ...
Report: report2_name
Header1 Header2 ...
value value ...
value value ...
... ... ...
This patch introduces DM report group (represented by dm_report_group
structure) that is used to group several reports to make a whole. As a
whole, all the reports in the group follow the same settings and/or
formatting used on output and it controls that the output is properly
ordered (e.g. the output from different reports is not interleaved
which would break readability and/or syntax of target output format
used for the whole group).
To support this feature, there are 4 new functions:
- dm_report_group_create
- dm_report_group_push
- dm_report_group_pop
- dm_report_group_destroy
From the naming used (dm_report_group_push/pop), it's clear the reports
are pushed onto a stack. The rule then is that only the report on top
of the stack can be reported (that means calling dm_report_output).
This way we make sure that the output is not interleaved and provides
determinism and control over the output.
Different formats may allow or disallow some of the existing report
flags controlling output itself (DM_REPORT_OUTPUT_*) to be set or not so
once the report is pushed to a group, the grouping code makes sure that
all the reports have compatible flags set and then these flags are
restored once each report is popped from the report group stack.
We also allow to push/pop non-report item in which case such an item
creates a structure (e.g. to put several reports together with any
opening and/or closing lines needed on output which pose as extra
formatting structure besides formatting the reports).
The dm_report_group_push function accepts an argument to pass any
format-specific data needed (e.g. handle, name, structures passed
along while working with reports...).
We can call dm_report_output directly anytime we need (with the only
restriction that we can call dm_report_output only for the report that
is currently on top of the group's stack). Or we don't need to call
dm_report_output explicitly in which case all the reports in a stack are
reported on output automatically once we call dm_report_group_destroy.
Fix parsing of 'Fail' status (using capital letter) for thin-pool.
Add also parsing of 'Error' state for thin-pool.
Add needs_check test for thin-pool.
Detect Fail state for thin.
In lookup, return a count of entries with the
same key rather than the value from a second
entry with the same key.
Using some slightly different names.
If the data len is passed into the hash table
and saved there, then the hash table internals
do not need to assume that the data value is
a string at any point.
New hash table functions are added that allow for
multiple entries with the same key. Use of the
vgname_to_vgid hash table is converted to these
new functions since there are multiple entries
in vgname_to_vgid that have the same key (vgname).
When multiple VGs with the same name exist, commands
that reference only a VG name will fail saying the
VG could not be found (that error message could be
improved.) Any command that works with the select
option can access one of the VGs with -S vg_uuid=X.
vgrename is a special case that allows the first VG
name arg to be replaced by a uuid, which also works.
(The existing hash table implementation is not well
suited for handling this case, but it works ok with
the new extensions. Changing lvmetad to use its own
custom hash tables may be preferable at some point.)
Add more functionality to size_changed function.
While 'existing' API only detected 0 for
unchanged, and !0 for changed,
new improved API will also detected if the
size has only went bigger - or there was
size reduction.
Function work for the whole dm-tree - so
no change is size is always 0.
only size extension 1.
and if some size reduction is there - returns -1.
This result can be used for better evaluation
whether we need to flush before suspend.
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.
In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.
For example:
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""
$ lvs vg
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize
lvol0 vg -wi-a----- 4.00m
dm_report_compact_given_fields is the same as dm_report_compact_fields,
but it processes only given fields, not all the fields in the report
like dm_report_compact_field does.
Add support for creating, parsing, and reporting dm-stats latency
histograms on kernels that support precise_timestamps.
Histograms are specified as a series of time values that give the
boundaries of the bins into which I/O counts accumulate (with
implicit lower and upper bounds on the first and last bins).
A new type, struct dm_histogram, is introduced to represent
histogram values and bin boundaries.
The boundary values may be given as either a string of values (with
optional unit suffixes) or as a zero terminated array of uint64_t
values expressing boundary times in nanoseconds.
A new bounds argument is added to dm_stats_create_region() which
accepts a pointer to a struct dm_histogram initialised with bounds
values.
Histogram data associated with a region is parsed during a call to
dm_stats_populate() and used to build a table of histogram values
that are pointed to from the containing area's counter set. The
histogram for a specified area may then be obtained and interogated
for values and properties.
This relies on kernel support to provide the boundary values in
a @stats_list response: this will be present in 4.3 and 4.2-stable. A
check for a minimum driver version of 4.33.0 is implemented to ensure
that this is present (4.32.0 has the necessary precise_timestamps and
histogram features but is unable to report these via @stats_list).
Access methods are provided to retrieve histogram values and bounds
as well as simple string representations of the counts and bin
boundaries. Methods are also available to return the total count
for a histogram and the relative value (as a dm_percent_t) of a
specified bin.
Add support for the kernel precise_timestamps feature. This allows
regions to be created using counters with nanosecond precision.
A new dm_stats method, dm_stats_set_precise_timestamps() causes all
future regions created with this handle to attempt to enable precise
counters.
Add a function to test whether the kernel precise_timestamps
feature is available in the current device-mapper driver version.
Presence of precise_timestamps also implies the availability of
latency histograms.
Several interfaced in libdm-stats return a uint64_t when it is
only used to signal success/failure: change all these uses to
return a simple int instead.
Add a method to retrieve the offset of an area within the
containing region (rather than the offset within the containing
device returned by dm_stats_get_area_start()).
Although users of the library can calculate this themselves it is
better to provide this through a method call to avoid users making
assumptions about the structure of regions and areas.
Introduce enums and global variables to record cleanly which command we
are processing and eliminate the historically inconsistent use of the
shifted argv[0] and fix assorted bugs discovered along the way.
Add dm_report_is_empty() to indicate there is no data awaiting output
and use this to suppress dmsetup report headings when no data is output
so we don't get a stray line saying 'Help' at the end of reporting help.
Define a report type (as the interface requires) so -o all selects
the right fields in splitname. (A fix for stats list will follow.)
Exit immediately if no device is supplied to dmsetup wipe_table instead
of hitting errors later and failing.
Adjust the command name printed in usage/help output to match command
invoked (most of the time).
Add the libdm-stats module to libdm: this implements a simple interface
for creating, managing and interrogating I/O statistics regions and
areas on device-mapper devices.
The library interface is documented in libdevmapper.h and provides a
'dm_stats' handle that is used to perform statistics operations and
obtain data.
Public methods are provided to create and destroy handles and to list,
create, and destroy statistics regions as well as to obtain and parse
counter data and calculate rate-based metrics.
This commit also adds a 'dmsetup stats' (aka 'dmstats') command with
'clear', 'create', 'delete', 'list', 'print', and 'report' sub-commands.
See the library documentation and the dmstats.8 manual page for detailed
API and command descriptions.
Don't do interval management and external timekeeping for stats in
dm_report: let applications handle this on their own.
Since this has not been included in a release remove it from the
library entirely and handle report timing directly inside dmsetup.
Add a function to print column headings regardless of whether they
have already been output. This will be used by dmstats to issue
periodic reminders of the column headings.
This patch removes a check for RH_HEADINGS_PRINTED from
_report_headings that prevents headings being displayed if the flag
is already set; this check is redundant since the only existing
caller (_output_as_columns()) already tests the flag before
calling the function.
