IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Move the location of scans to make it clearer and avoid
unnecessary repeated scanning. There should be one scan
at the start of a command which is then used through the
rest of command processing.
Previously, the initial label scan was called as a side effect
from various utility functions. This would lead to it being called
unnecessarily. It is an expensive operation, and should only be
called when necessary. Also, this is a primary step in the
function of the command, and as such it should be called prominently
at the top level of command processing, not as a hidden side effect
of a utility function. lvm knows exactly where and when the
label scan needs to be done. Because of this, move the label scan
calls from the internal functions to the top level of processing.
Other specific instances of lvmcache_label_scan() are still called
unnecessarily or unclearly by specific commands that do not use
the common process_each functions. These will be improved in
future commits.
During the processing phase, rescanning labels for devices in a VG
needs to be done after the VG lock is acquired in case things have
changed since the initial label scan. This was being done by way
of rescanning devices that had the INVALID flag set in lvmcache.
This usually approximated the right set of devices, but it was not
exact, and obfuscated the real requirement. Correct this by using
a new function that rescans the devices in the VG:
lvmcache_label_rescan_vg().
Apart from being inexact, the rescanning was extremely well hidden.
_vg_read() would call ->create_instance(), _text_create_text_instance(),
_create_vg_text_instance() which would call lvmcache_label_scan()
which would call _scan_invalid() which repeats the label scan on
devices flagged INVALID. lvmcache_label_rescan_vg() is now called
prominently by _vg_read() directly.
To do label scanning, lvm code calls lvmcache_label_scan().
Change lvmcache_label_scan() to use the new label_scan()
based on bcache.
Also add lvmcache_label_rescan_vg() which calls the new
label_scan_devs() which does label scanning on only the
specified devices. This is for a subsequent commit and
is not yet used.
New label_scan function populates bcache for each device
on the system.
The two read paths are updated to get data from bcache.
The bcache is not yet used for writing. bcache blocks
for a device are invalidated when the device is written.
When user configured lvm2 to NOT user monitoring, activated mirror
actually hang upon error and it's quite unusable moment.
So instead Warn those 'brave' non-monitoring users about possible
problem and activation mirror without blocking error handling.
This also makes it a bit simpler for test suite to handle trouble
cases when test is running without dmeventd.
When adjusting region size for clustered VG it always needs to fit
2 full bitset into 1MB due to old limits of CPG.
This is relatively big amount of bits, but we have still limitation
for region size to fit into 32bits (0x8000000).
So for too big mirrors this operation needs to fail - so whenever
function returns now 0, it means we can't find matching region_size.
Since return 0 is now 'error' we need to also pass proper region_size
when creating pvmove mirror.
Since extent_size is no longer power_of_2 this max region size
evalution was rather producing random bitsize as a combination
of lowest bit from number of extents and extent size itself.
Correct calculation to use whole LV size and pick biggest
possible power of 2 value smaller then UINT32_MAX.
Drop mirrored mirror log limitation that applies only in very limited
use-case and actually mirrored mirror log is deprecated anyway.
So 'disk' mirror log is selecting the correct minimal size, and
bigger size is only enforced with real mirrored mirror log.
Also for mirrored mirror log we let use 'smalled' region size if needed
so if user uses 1G region size, we still keep small mirror log
with much smaller region size in this case when needed.
Also mirror log extent calculation is now properly detecting error
with too big mirrors where previosly trimmed uint32_t was applies
unintentionally.
Whenever we make visible LV out of previously invisible one,
reload it's table - the is mandator for proper udev rule
processing as well as ensure content of dm table is correct.
TODO: this new generic rule probably make extra raid rules unnecessary.
Only policy 'smq' is meant to be used with format version 2.
Code used to let pass 'mq' policy also with format 2. But 'mq'
is obsoloted wth smq and kernel currently matches it. But this
is incompatible with older original mq logic - so disallow creation
of this rather useless combination.
If the tools for checking thin_pool or cache metadata are missing,
issue rather just a WARNING, but let the operation of activation
continue.
This has the advantage, the if user is missing those tools,
but he already started to use thinpool or cacheing, he can
access these volumes with a WARNING.
Also if the user is using too old tools i.e. for CacheV2 format
dmpd tool 0.7 is required - provide informative WARNING and
skip failure from older tool version which can't understand
new format V2.
In case a newly created RaidLV is blacklisted using config
\"activation { volume list = [ ... ] }\" (i.e. its SubLVs stay inactive),
the metadata SubLVs can't get wiped thus failing the creation.
As a result, the RaidLV together with its SubLVs
is left behind in an inconsistent state.
Fix by removing the RaidLV and provide a hint about volume_list reasoning.
Resolves: rhbz1161347
While prioritized_section() based on raised priority works
nicely for standard lvm comman - separate counter is actually needed
when it's used in daemons like clvmd/dmeventd where priority
stays raised all the time.
Detect we are in prioritezed section instead of critical one,
since these operation were supposed to NOT be happining during
whole set of operation.
This patch fixes verification of udev operations.
Introduce prioritized_section() as a closer match to previous logic
of critical_section() that has been held over longer sequence of
ioctl commands - essentially it's matching operation on a single
cookie.
While 'critical_section()' now corresponds to locked memory - we hold
this memory only between suspend/resume thus notion of 'cookie' was
lost.
This patch restores some logic unintentionaly lost with dropping
memory locking for just activation/deactivation calls.
With these read errors it's useful to know the reason.
Also avoid to log error just once so we know exactly
how many times we did failing read.
On the other hand reduce repeated log_error() on code 'backtrace'
path and change severity of message to just log_debug() so the
actual read error is printed once for one read.
Just like lvm2 has internal devices like _tdata which is using UUID with
suffix, there is similar private type of device for crypto device where
they are using CRYPT-TEMP uuid prefix.
Also ignore stratis.
Some kernel version suffer from bad state transition where a device
steps into 'frozen' mode. Any application that tries to read such
raid gets unfortunatelly bloked.
As some sort of protection try to skip such raid device from being
scanned to minimize chances to block lvm2 command on such scan.
When such device is found, warning gets printed.
RaidLVs on read_only_volume_list have their SubLVs
activated readonly thus disabling metadata updates
or image resynchronization/recovery. Bug also causes
automatic repairs to fail.
Fix by always activating the RAID SubLVs readwrite.
Resolves: rhbz1208269
Just like with lvcreate, this lvconvert case also need to properly
check which LV actually holds lock for cached origin - as it might
be i.e. thin-pool tdata subLV.
When snapshot is created in read-only mode with 'lvcreate -s -pr...',
lvm2 still needs to be able to write to layered -cow volume
to store metadata and exceptions blocks.
TODO: in some case we might be able to do full tree with read-only
volume but this probably needs futher validation:
1. checking snapshot header already exist
2. origin & snapshot are both in read-only mode.
Occasionaly users may need to peek into 'component devices.
Normally lvm2 does not let users activation component.
This patch adds special mode where user can activate
component LV in a 'read-only' mode i.e.:
lvchange -ay vg/pool_tdata
All devices can be deactivated with:
lvchange -an vg | vgchange -an....
If componet devices could be activated alone, ensure they are not breaking
common commands.
TODO: mostly likely this is not a definite list of all needed checks
and more will come later.
This is the 'last' place where a LV is present in metadata.
Any removed device should not be left active in dm table.
So this check is an extra validation protection to capture any
forgotten deactivation (adding 1 extra ioctl into lvremove path)
Introduce:
lv_is_component() check is LV is actually a component device.
lv_component_is_active() checking if any component device is active.
lv_holder_is_active() is any component holding device is active.
Instead of checking with existing size of external origin LV,
use correctly the new 'wanted' size of this LV whether it fits
the limitiation requirements for older thin-pool target.
Otherwise code started to the the resize, updates metadata and
just fails during 'resize' in case the LV was active. For
inactive LV operation could have actually passed.
Checking here for cache_pool is not necessary and in effect
the check is not even right - since there are internal
states that do allow to active such LV.
Fix missing 'externalLV' traversing for thins with external origins.
Replace extra for_each_sub_lv_except_pools() with better
internal logic allowing selectively to cut of processed subLV tree.
Extend error code for function 'fn()' when it returns -1 it will
stop futher tree scan for given LV.
Also a bit simplify code to have only one place that
is calling 'fn()' and use level counter to know
depth of traversing.
Update renaming travering to skip trees for pools
and external origins.
While 'file-locking' code always dropped cached VG before
lock was taken - other locking types actually missed this.
So while the cache dropping has been implement for i.e. clvmd,
actually running command in cluster keept using cache even
when the lock has been i.e. dropped and taken again.
This rather 'hard-to-hit' error was noticable in some
tests running in cluster where content of PV has been
changed (metadata-balance.sh)
Fix the code by moving cache dropping directly lock_vol() function.
TODO: it's kind of strange we should ever need drop_cached_metadata()
used in several places - this all should happen automatically
this some futher thinking here is likely needed.
So this is a bit more complex and possibly worth futher checking.
ATM clvmd drops cmd->mem mempool AFTER refresh of cmd.
So anything allocating from cmd->mem during toolcontext init
will likely die at some point in time.
As a quick fix - just use regular malloc/free for 'dso' alloction.
It's worth to note - cmd->libmem seems to be often misused
causing hidden memleaking for clvmd.
Build dso plugin name during segtype initialisation and just
use the string during command life-time.
Also slightlt update message verbosity and make it very_verbose
when operation is going to be made and 'verbose' when it's done.
Avoid using same return code for reporting 2 different things
and stricly report error code by return value and add new
parameter for reporting monitoring status.
This makes easier to recognize which error we got from dm_event
and continue only with ENOENT.
With pthreaded daemons like 'dmeventd' using liblvm via plugin,
lvm2 actually should not 'play' with streams at all - as there
could be parallel outputs running.
As a current quick workaround just disable change for pthreaded
program (gettid() != getpid()).
TODO: it's possible the change of buffering actually doesn't serve us
any measurable benefit and could be dropped as whole later...
Meanwhile this patch is fixing this occasional valgrind race report:
Invalid read of size 4
at 0x571892C: vfprintf (in /usr/lib64/libc-2.26.9000.so)
by 0x57216B3: fprintf (in /usr/lib64/libc-2.26.9000.so)
by 0x5042886: dm_event_log (libdevmapper-event.c:925)
by 0x10B015: _dmeventd_log (dmeventd.c:125)
by 0x10D289: _unregister_for_event (dmeventd.c:1146)
by 0x10E52E: _handle_request (dmeventd.c:1583)
by 0x10E6D7: _do_process_request (dmeventd.c:1631)
by 0x10E7C6: _process_request (dmeventd.c:1660)
by 0x1101A4: main (dmeventd.c:2285)
Address 0x6264d30 is 192 bytes inside a block of size 552 free'd
at 0x4C2ED68: free (vg_replace_malloc.c:530)
by 0x573907D: fclose@@GLIBC_2.2.5 (in /usr/lib64/libc-2.26.9000.so)
by 0x6AC5C00: reopen_standard_stream (log.c:189)
by 0x6A8E62C: destroy_toolcontext (toolcontext.c:2271)
by 0x6BA5C22: lvm_fin (lvmcmdline.c:3339)
by 0x6BD5EF3: lvm2_exit (lvmcmdlib.c:123)
by 0x6856013: dmeventd_lvm2_exit (dmeventd_lvm.c:103)
by 0x66535B8: unregister_device (dmeventd_thin.c:432)
by 0x10CBBC: _do_unregister_device (dmeventd.c:926)
by 0x10CD74: _monitor_unregister (dmeventd.c:979)
by 0x10D094: _monitor_thread (dmeventd.c:1066)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
Block was alloc'd at
at 0x4C2DBBB: malloc (vg_replace_malloc.c:299)
by 0x573932B: fdopen@@GLIBC_2.2.5 (in /usr/lib64/libc-2.26.9000.so)
by 0x6AC5DC2: reopen_standard_stream (log.c:200)
by 0x6A8D11D: create_toolcontext (toolcontext.c:1898)
by 0x6BA5B6B: init_lvm (lvmcmdline.c:3319)
by 0x6BD5BC8: cmdlib_lvm2_init (lvmcmdlib.c:34)
by 0x6BD5F04: lvm2_init (lvm2cmd.c:20)
by 0x6855EA7: dmeventd_lvm2_init (dmeventd_lvm.c:67)
by 0x665305F: register_device (dmeventd_thin.c:352)
by 0x10CB7A: _do_register_device (dmeventd.c:916)
by 0x10CEE4: _monitor_thread (dmeventd.c:1006)
by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
....
Process terminating with default action of signal 6 (SIGABRT): dumping core
at 0x570016B: raise (in /usr/lib64/libc-2.26.9000.so)
by 0x5701520: abort (in /usr/lib64/libc-2.26.9000.so)
by 0x57437D8: __libc_message (in /usr/lib64/libc-2.26.9000.so)
by 0x5743831: __libc_fatal (in /usr/lib64/libc-2.26.9000.so)
by 0x5744056: _IO_vtable_check (in /usr/lib64/libc-2.26.9000.so)
by 0x574751C: __overflow (in /usr/lib64/libc-2.26.9000.so)
by 0x574191A: fputc (in /usr/lib64/libc-2.26.9000.so)
by 0x50428E3: dm_event_log (libdevmapper-event.c:934)
by 0x10B015: _dmeventd_log (dmeventd.c:125)
by 0x10D289: _unregister_for_event (dmeventd.c:1146)
by 0x10E52E: _handle_request (dmeventd.c:1583)
by 0x10E6D7: _do_process_request (dmeventd.c:1631)
by 0x10E7C6: _process_request (dmeventd.c:1660)
by 0x1101A4: main (dmeventd.c:2285)
In fact pvmove does support 'clustered-core' target for clustered
pvmove of LVs activated on multiple nodes.
This patch restores support for activation of pvmove on all nodes
for LVs that are also activate on all nodes.
Actually the removed code is necessary - since not all writes are
getting alligned buffer - older compilers seems to be not able
to create 4K aligned buffers on stack - this the aligning code still
need to be present for write path.
Add protectional internall error whenever we spot activation
of 'exclusive' only segments in 'non-exclusive' mode.
TODO: possibly the activation locking could be enhanced to handle
this fully behind the scene - as for now this works purely for
lvchange/vgchange activation.
Use properly exclusive activation when reactivating origin after
snapshot merge (since origin must have been previously also exlusively
activated).
Same applies when converting volumes to thin-pool or cache.
Previously used 'only' local activation incorrectly allowed local
activation of some targets (i.e. raid) - thus 'leaking' chance to
activate same device on another node - which can be a problem
for device types like raid.
No longer use the external 'result' pointer internally to set up the
cached label. The callback _set_label_read_result() is now given the
internal label pointer directly
Callers that don't need the result are no longer required to pass a
label pointer into label_read().
If the data being requested is present in last_[extra_]devbuf,
return that directly instead of reading it from disk again.
Typical LVM2 access patterns request data within two adjacent 4k blocks
so we eliminate some read() system calls by always reading at least 8k.
Callers that read larger amounts of data now get a pointer to read-only
data directly without copying it through an intermediate buffer. This
data is owned by the device layer so the callers no longer free it.
If it obtains the data, it passes it into the supplied callback function
and returns 1. Otherwise the callback receives failed = 1.
Updated config_file_read_fd to use this and similarly return the data
via a callback fn of its own.
Dedicated functions are now used to process each piece of data obtained,
so the refactoring in this file gives us one for the vgsummary and one
for the metadata header. This new type of function takes two parameters
(for now), the obtained data plus a single struct (that must not
reference any data on the stack) that wraps up the entire context needed
to process it.
Rename dev_read() to dev_read_buf() - the function that reads data
into a supplied buffer.
Introduce a new dev_read() that allocates the buffer it returns and
switch the important users over to this. No caller may change the
returned data. (For now, callers are responsible for freeing it after
use, but later the device layer will take full ownership.)
dev_read_buf() should only be used for tiny buffers or unimportant code
(such as the old disk formats).
The creation of wrapped around metadata - where the start of metadata is
written up to the end of the buffer and the remainder follows back at
the start of the buffer - is now restricted to cases where writing the
metadata in one piece wouldn't fit. This shouldn't happen in 'normal'
usage so let's begin treating the code for this as a special case that
can be ignored when optimising 'normal' cases.
If there is sufficient space in the metadata area, align the next
metadata to a disk offset that is a multiple of 4096 bytes and
don't write it circularly. If it doesn't all fit at the end
of the metadata area, go back to the start and write it all there
contiguously.
If there is insufficient space to use the new stricter rules, revert to
the original behaviour, aligning on 512-byte boundaries wrapping around
the circular buffer as required.
Even after writing some metadata encountered problems, some commands
continue (rightly or wrongly) and attempt to make further changes.
Once an mda is marked MDA_FAILED, don't try to use it again.
This also applies when reverting, where one loop already skips
failed mdas but the other doesn't.
This fixes some device open_count warnings on relevant failure paths.
Use new ALIGN_ABSOLUTE macro when calculating the start location
of new metadata and adjust the end of buffer detection so that
there is no longer an imposed gap between old and new metadata.
Currently both start and offset should always be divisible by alignment,
so this should have no effect, but a later patch will increase alignment
so these variables can no longer be optimised out.
Although it doesn't look like it can be a measurable problem
and costs some time to flip priorities outside of activation window.
So just like with memory locking preserve priority until call
memlock_unlock() appears.
(addition to commit c086dfadc3).
Expand out the metadata wrapping calculations to prepare
to support a larger alignment.
The current alignment is 512 bytes so
(mdac_area_start + rlocn->offset) % alignment is zero.
Mark the first metadata area on each text format PV as MDA_PRIMARY.
Pass this information down to the device layer so that when
there are two metadata areas on a block device, we can easily
distinguish two independent streams of I/O.
In case of failed legs, raid replaces those with
e.g. "vg-lv_rimage_0-missing_0_0" mapped to an error target.
Those errouneously remain on deactivation.
Fix by removing them on deactivation/removal of the RaidLV.
Introduce enum dev_io_reason to categorise block device I/O
in debug messages so it's obvious what it is for.
DEV_IO_SIGNATURES /* Scanning device signatures */
DEV_IO_LABEL /* LVM PV disk label */
DEV_IO_MDA_HEADER /* Text format metadata area header */
DEV_IO_MDA_CONTENT /* Text format metadata area content */
DEV_IO_FMT1 /* Original LVM1 metadata format */
DEV_IO_POOL /* Pool metadata format */
DEV_IO_LV /* Content written to an LV */
DEV_IO_LOG /* Logging messages */
If the recovery of the repleced leg(s) of a RaidLV created without
initial resynchronization (i.e. "lvcreate --nosync ...") got
interrupted, it can't be extended because of the < 100% sync rate.
In case caller passes in changed stripe size when reshaping raid4/5
to 1 stripe aiming to convert to raid1 and optionally to linear,
ignore it to prevent data corruption.
Use new 3rd. state of trace_pvmove_deps == 2.
In this state we know, we have already seen the node and can skip futher
testing. Remainging value 1 signals we want to track, and value 0
is for ignoring tracking, but node is still checking in this case.
Reduces large amount of duplicate ioctl queries.
Check also all snapshosts when resume is requested,
the origin volume is already resume, but possibly
some subLV or snapshot LV could be suspended if
we are still in critical_section.
When entering any critical section, lvm2 used to lock process memory
and raised task priority to avoid problem with page swapping and minimize
time of having non-resumed devices in table.
With this patch, memory locking which which is expensive is only used when
entering 'suspending' section as only in this section there is risk
lvm could be suspending a device which later can be needed for paging.
Raised priority is still kept for all section entrances as this is
low-cost operation and may accelerate table resumes - although the real
impact can be still considered later.
When pvmove is finished and metadata are updated, the code missed
to merge possible mergable segments - so add explicit merging
call after pvmoved volumes are unlocked.
This avoids weird results where i.e. lvs could have been reporting
non-matching segments as lvs upon metadata read is doing silent segment
merging while dm table left after pvmove was still preserving
non-merged segments.
ATM we want to support delayed resume purely in pvmove case.
So have libdm logic internal to recognize difference beween
pvmove and other targets that do use delayed resume.
This fixes problem introduced with commit aa68b898ff
for mirror-on-mirror or snapshot-on-mirror problem.
TODO: likely added new API call and let libdm user select
delayed nodes explicitely.
Use code which detectes handlers in a way, which is more
backward-compatible friendly.
Replace read of 'sysfs' uuid entry with dm ioctl call.
Use /sys/block/dm-X/holders path instead of
new path /sys/dev/block/major:minor/holders.
TODO:
There are few more occurencies of this logic around the code
so some abstract interface should be considered.
In some cases the message could be slightly misleading so use
here rather conditional.
TODO:
In future we may possibly further tune the message in case we are
certain the level of redundancy protection has not been reduced.
When pvmove is finished and does 'suspend/resume' on PVMOVE LV,
on resume path committed metadata are already showing 'standalone'
pvmove LV prepared just for removal.
However code should be able to 'resume' preloaded LV there were
participating in pvmove operation.
Previously this was all done in the 'tools' part of lvm2 code.
So the lvconvert upon pvmove finish had to explicitely call 'resume' on every such LV.
Now 'smarted' activation code is able to deduce and combine all information from
the active dm table and committed metadata so single call resolves
it all in one go.
Internally holders are detected by reading sysfs directory to capture
all needed UUID which are then looked in lvm2 metadata and all such
LVs are automatically collected into dmtree.
Replace complex code with standard lv_update_and_reload_origin().
Extra suspend should not be necessary.
(If they would be - dependency tree would have bug for fixing).
Only thin-pool with origin_only suspend is allowed to be not suspending anything.
In such case pairing resume will 'decrement' critical section counter.
Just like suspend handles preload for pvmove finish,
in similar way handle suspend of starting pvmove.
In this case the precommited metadata are checked for list of PVMOVEed
LVs and those are suspended in with committed metadata.
There is no need to differentiation between clustered VG and normal VG.
As the activation depends on locking type.
Use unconditionally locally exclusive activation for pvmove.
Whenever pvmove tree is going to be generated for suspend
and such LV has a user - use this 'using LV' to generate
correct dm tree holding all components.
LV is asked for resume, and its already resume and tool
is inside 'critical_section()' check if there is any suspended sub LV.
In that case 'resume' operation will not be skipped.
When activation of LVs fails prior pvmove start, try to deactivate
already activated LVs.
TODO: possibly remember which LVs where already activate and only those
take down - devices which are already in-use will stay active.
Only lv_committed() now uses vg->vg_committed and it appears redundant
if its contents match the enclosing VG so don't waste cycles creating it
when that's known to be true when no write lock is held so the struct
won't get modified.
- Use 'lvmcache' consistently instead of 'metadata cache'
- Always use 5 characters for source line number
- Remember to convert uuids into printable form
- Use <no name> rather than (null) when VG has no name.
If the suspend/resume sequence would leave some device in suspend
for possible later resume, backup cannot be takes (fs holding backups
could be still frozen in critical section())
Move check for presence of raid4 into the right place
so there is no way how to hit activation of any LV
with raid4 on kernel which does not support it.
Commit 763db8aab0 rejects 2-legged
conversions to striped/raid0 but different messages are displayed
for raid0 or striped. This commit provides the same rejection messages.
raid4/5 LVs may only be converted to striped or raid0/raid0_meta
in case they have at least 3 legs. 2-legged raid4/5 are a result
of either converting a raid1 to raid4/5 (takeover) or converting
a raid4/5 with more than 2 legs to raid1 with 2 legs (reshape).
The raid4/5 personalities map those as raid1,
thus reject conversion to striped/raid0.
Resolves: rhbz1511047
Since vg_validate() now rejects LVs without segments and
insert_layer_for_segments_on_pv() gets just created
'layer_lv' without segment, it needs to be hidden
from vg->lvs during processing of _align_segment_boundary_to_pe_range()
as this function calls lv_validate() and now requires
vg to be consistent. LV is then put back into vg->lvs.
Since 4fa5add6b1 ("pvcreate: Wipe cached
bootloaderarea when wiping label.") label_remove is responsible
for the lvmcache_del. (toollib and liblvm need fixing to share
the code.)
When an ignored metadata area gets flagged for use again, make sure the
code doesn't try to parse its old metadata. Firstly by trying to detect
this situation and skipping the read (while still remembering the
position reached in the circular buffer), and secondly by clearing the
invalid live metadata location on disk as a precaution when subsequently
writing out the precommitted metadata.
Problems showed up when a metadata area in one VG got moved to
another VG in ignored state (still holding metadata for the original
VG) and then later got brought into use in the new VG - only the header
should be read in this case, not any of the metadata content.
vgsplit shares the vg_rename code so that must only set the PV_MOVED_VG
flag introduced in commit 486ed10848
("vgmerge: Fix intermediate metadata corruption") on PVs that moved.
Since both lvcreate and lvconvert needs to check for same
type of allowed origin for snapshot - move the code into
a single function.
This way we also fix several inconsitencies where snapshot
has been allowed by mistake either through lvcreate or
lvconvert path.
Converting from one raid level to another, no changes
of stripes or stripesize can be requested because those
are subject to reshaping. I.e. the process requires to
takeover first and secondly request raid algorithm,
stripe or stripesize changes.
Ignore any related changes display warninngs
and proceed with the takeover.
Without this patch, a takeover requesting
stripesize change causes data corruption!
Add explaining message, when command was aborted due to the reach
of configure line number count (LVM_LOG_FILE_MAX_LINES)
for logging (used mainly with testing).
Do not allow to take snapshot of mirror/raid leg or log or metadata LV.
This was actually never supported, but user was able to create it,
and this put device stack in hardly fixable state (needs manual work).
This prevents such creation to pass.
Also improve validation when recreating snapshot volume type
from origin and COW volume.
Replaced the confusing device error message "not found (or ignored by
filtering)" by either "not found" or "excluded by a filter".
(Later we should be able to say which filter.)
Left the the liblvm code paths alone.
Fixes the following case with 3PVs and 3 legs "mirror" LV:
# lvcreate -l100%FREE --type mirror -m2 vg3
Insufficient free space for log allocation for logical volume .
Unable to allocate extents for mirror log.
Related: rhbz1269533
Activation lock has a primary purpose to serialize locking of individual
LV in case there is no other protecting mechanism for parallel
execution.
However in the case an activated LV is composed from several other LVs,
noone should be able to manipulate with those LVs as well.
This patch add a very 'naive' global VG activation locking in this case.
In the future we may introduce smarter function detecting minimal closed
graph components if this will appear as bottleneck
Patch checks if the VG Write lock is held - in this case we do not
need any more locking - command has exclusive access to VG.
In case we have clustered VG and we are activating an LV which does not
need other LVs - we also do not need any more locks.
In all other cases take respective lock - for single LV - use lvid,
for complex LVs use vgname.
Creating striped RaidLVs with lv size not divisible by region size
caused the region size to be adjusted:
# lvcreate --type raid5 -n region_check.32.00m_3 -i 3 -L 1g --nosync -R 32.00m raid_sanity
Using default stripesize 64.00 KiB.
Rounding size 1.00 GiB (256 extents) up to stripe boundary size <1.01 GiB(258 extents).
WARNING: New raid5 won't be synchronised. Don't read what you didn't write!
Using reduced mirror region size of 8.00 MiB
Logical volume region_check.32.00m_3 created.
Fix by not imposing "mirror" constraints on "raid".
Resolves: rhbz1404007
vgmerge suffers from a similar problem to the one fixed in commit
8146548d25 ("vgsplit: Fix intermediate
metadata corruption.")
When merging, splitting or renaming VGs, use a new PV status flag
PV_MOVED_VG to mark the PVs that hold metadata with the old VG name and
use this to provide PV-level granularity instead of incorrectly assuming
all PVs in the VG are the same.
Changing the VG of a PV uses the same on-disk mechanism as vgrename.
This relies on recognising both the old and new VG names. Prior to this
patch the vgsplit code incorrectly provided the new VG name twice
instead of the old and new ones. This lead the low-level mechanism not
to recognise the device as already belonging to a VG and so paying no
attention to the location of its existing metadata, sometimes partly
overwriting it and then later trying to read the corrupt metadata and
issuing a checksum error.
In a shared VG, only allow pvmove with a named LV,
so that only PE's used by the LV will be moved.
The LV is then activated exclusively, ensuring that
the PE's being moved are not used from another host.
Previously, pvmove was mistakenly allowed on a full PV.
This won't work when LVs using that PV are active on
other hosts.
In a shared VG, lvconvert must be used to create thin pools
and cache pools, not the lvcreate variants of those commands.
Deny these cases early in lvcreate using the new command defs.
Denying these cases deeper in the code was missing some
cleanup of the partially completed command.
Revert the lvmlockd.c changes from:
commit 0bf836aa14
"tidy: prefer not using else after return"
The commit introduced at least one regression, which broke
lvcreate of a thin pool in a shared VG.
When file-locking mode failed on locking, such description was leaked
(typically not an issue since command usually exists afterwards).
So shirt close() at the end of function and use it in all error paths.
Also make sure, when interrrupt is detected, it's really not holding
lock and returns 0.
lvmcache_foreach_mda() can fail for numerous reasons
and failing error code cannot be ignored (out-of-memory...)
TODO: might need more error handling tunning.
After the internal lvmlock LV (holding sanlock leases) is
extended to hold more leases, it needs to be zeroed.
sanlock expects to see either zeroed blocks or blocks
initialized with leases.
Fix code checking that the 2nd mda which is at the end of disk really
fits the available free space and avoid any DA and MDA interleaving when
we already have DA preallocated. This mainly applies when we're restoring
a PV from VG backup using pvcreate --restorefile where we may already have
some DA preallocated - this means the PV was in a VG before with already
allocated space from it (the LVs were created). Hence we need to avoid
stepping into DA - the MDA can never ever be inside in such case!
The code responsible for this calculation was already in
_text_pv_add_metadata_area fn, but it had a bug in the calculation where
we subtracted one more sector by mistake and then the code could still
incorrectly allocate the MDA inside existing DA. The patch also renames
the variable in the code so it doesn't confuse us in future.
Also, if the 2nd mda doesn't fit, don't silently continue with just 1
MDA (at the start of the disk). If 2nd mda was requested and we can't
create that due to unavailable space, error out correctly (the patch
also adds a test to shell/pvcreate-operation.sh for this case).
Previously the cache remembered an existing bootloaderarea and
reinstated it (without even checking for overlap) when asked to
write out the PV. pvcreate could write out an incorrect layout.
Avoid adding -g more then once for debug builds.
Avoid enabling DEBUG_MEM when we build multithreaded tools.
Link executables with -fPIE -pie and --export-dynamic LDFLAGS
Introduce PROGS_FLAGS to add option to pass flags for external libs.
Link lvm2 internally library only when really used.
Link DAEMON_LIBS with daemons.
Pass VALGRIND_CFLAGS internally
Set shell failure mode on couple places.
lvm2 warned about zeroing and too big chunksize (>=512KiB), but
only during lvconvert, so lvcreate was creating thin-pools
without any warning about possible slowness of thin provisioning
because of zeroing.
Since _deactivate_and_remove_lvs() is used in more then one place,
move the needed udev synchronization into this function so other
users automatically get correct fs state before next dm manipulation.
Assumption here is that this udev synchronization 'delay' may also
prevent to 'early' table reloads which might cause kernel problems
for md-core - but we may need more generic time-limited reload
frequency for raid devices.
Note: on udev-less system there will be almost no delay.
API for strtod() or strtoul() needs reset of errno, before it's being
called. So add missing resets in missing places and some also some
errno validation for out-of-range numbers.
Switch from warn to log_error since this generated
failing return code for command so printing log_error()
is mandatory.
Happens with i.e. pvscan --cache meets crashing lvmetad.
Commit 34504855a7 introduced
flag LV_RESHAPE_DATA_OFFSET and used it to avoid incompatible
activation on older runtime.
Enhance vg_validate() raid checking functions with checks for it.
In order to reject out of place reshaping with segment data_offset
field on old runtime, add a respective segment type incompatibility
flag causing "+RESHAPE_DATA_OFFSET" to be suffixed to the segment
type name.