IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Introduces new libdevmapper function dm_tree_node_add_snapshot_merge_target
Verifies that the kernel (dm-snapshot) provides the 'snapshot-merge'
target.
Activate origin LV as snapshot-merge target. Using snapshot-origin
target would be pointless because the origin contains volatile data
while a merge is in progress.
Because snapshot-merge target is activated in place of the
snapshot-origin target it must be resumed after all other snapshots
(just like snapshot-origin does) --- otherwise small window for data
corruption would exist.
Ideally the merging snapshot would not be activated at all but if it is
to be activated (because snapshot was already active) it _must_ be done
after the snapshot-merge. This insures that DM's snapshot-merge target
will perform exception handover in the proper order (new->resume before
old->resume). DM's snapshot-merge does support handover if the reverse
sequence is used (old->resume before new->resume) but DM will fail to
resume the old snapshot; leaving it suspended.
To insure the proper activation sequence dm_tree_activate_children() was
updated to accommodate an additional 'activation_priority' level. All
regular snapshots are 0, snapshot-merge is 1, and merging snapshot is 2.
Make 'merging_snapshot' pointer that points from the origin to the
segment that represents the merging snapshot.
Import/export 'merging_store' metadata.
Do not allow creating snapshots while another snapshot is merging.
Snapshot created in this state would certainly contain invalid data.
NOTE: patches at the end of this series will remove 'merging_snapshot'
and will introduce helpful wrappers and cleanups.
This spurious 'break' has been here since this code was first committed
in June 2005 and stopped the algorithm behaving as described in the
comment above it and rendered the variable 'already_found_one' useless.
1. Found bug in 'redundant log' implementation that caused
problems when converting a linear that spanned multiple
devices to a mirror (wasn't checking for NULL value of
provided parameter in _alloc_parallel_area)
2. Testsuite was failing to perform tests when 'not' modifier
was used. This allowed a couple issues to slip through.
Added a 'not_sh' modifier that negates tests performed by
functions defined in the shell source file.
3. Was initializing a variable to far down, which cause
previously set value to be overridden. (This was the
result of the collision of the "redundant log" and
lvconvert fix patches.)
successfully created it must _exit() once it completes.
Update _become_daemon() to differentiate between a failed fork() and a
successful fork().
Added lvm_return_code() to lvmcmdline.[ch]
Upon successful fork(), _become_daemon() must assert that the locks that
are currently held belong to the parent, not the child. All of the
child's internal state saying 'this process holds a lock' has to be
reset.
A proper lvmcache_locking_reset() should follow later.
date: 2010/01/07 20:42:55; author: jbrassow; state: Exp; lines: +11 -0
The patch fixes some lvconvert issues (WRT mirror <-> mirror).
1) 'exisiting_mirrors' and 'lp->mirrors' where taken to be in 'n-1'
notation (i.e a 2-way mirror is '1' and a linear is '0'), but the
variables were in 'n' notation.
2) After adding the redundant mirror log support, I was calculating
log_count by looking at the mirror log LV, but didn't take into
account the fact that there could be no mirror log!
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Sometimes it is really needed to switch off udev checking and the warnings we show when
we detect that udev has not done its job right - the messages like "Udev should have done
this and that. Falling back to direct node creation/removal. " etc.
This would be especially handy while setting DM_DEV_DIR env var that could be set to a
different location than standard /dev (udev can't create nodes/symlinks out of that one
directory that is configured into udevd). The exact same situation happens while we're
running our tests.
It is pretty much the same as reducing the number of
mirror legs, but we just don't delete them afterwards.
The following command line interface is enforced:
prompt> lvconvert --splitmirror <n> -n <name> <VG>/<LV>
where 'n' is the number of images to split off, and
where 'name' is the name of the newly split off logical volume.
If more than one leg is split off, a new mirror will be the
result. The newly split off mirror will have a 'core' log.
Example:
[root@bp-01 LVM2]# !lvs
lvs -a -o name,copy_percent,devices
LV Copy% Devices
lv 100.00 lv_mimage_0(0),lv_mimage_1(0),lv_mimage_2(0),lv_mimage_3(0)
[lv_mimage_0] /dev/sdb1(0)
[lv_mimage_1] /dev/sdc1(0)
[lv_mimage_2] /dev/sdd1(0)
[lv_mimage_3] /dev/sde1(0)
[lv_mlog] /dev/sdi1(0)
[root@bp-01 LVM2]# lvconvert --splitmirrors 2 --name split vg/lv /dev/sd[ce]1
Logical volume lv converted.
[root@bp-01 LVM2]# !lvs
lvs -a -o name,copy_percent,devices
LV Copy% Devices
lv 100.00 lv_mimage_0(0),lv_mimage_2(0)
[lv_mimage_0] /dev/sdb1(0)
[lv_mimage_2] /dev/sdd1(0)
[lv_mlog] /dev/sdi1(0)
split 100.00 split_mimage_0(0),split_mimage_1(0)
[split_mimage_0] /dev/sde1(0)
[split_mimage_1] /dev/sdc1(0)
It can be seen that '--splitmirror <n>' is exactly the same
as '--mirrors -<n>' (note the minus sign), except there is the
additional notion to keep the image being detached from the
mirror instead of just throwing it away.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Made .update_metadata optional in 'struct poll_functions' definitions;
eliminated _update_lvconvert_mirror() stub.
Tweak a mirror-specific error message in the generic polldaemon code.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The default log option for a mirror is 'disk'. If the log
type is not explicitly stated on the command line when
converting from an X-way mirror to a Y-way mirror, 'disk'
is chosen. So, if you have a 'core' log mirror and you
convert, your result will contain a 'disk' log.
This patch remembers what the old log type was. If the
user is merely trying to switch the number of mirror
images, the log type is now kept the same.
There is one historical behaviour I left in place...
If you have a 2-way, core-log mirror and you use lvconvert to
specify you want a 2-way mirror - without specifying the
log type - you will get a 2-way, disk-log mirror.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Informal-IRC-ACK-by: agk
The logic was that lvconvert repair volumes, marking
PV as MISSING and following vgreduce --removemissing
removes these missing devices.
Previously dmeventd mirror DSO removed all LV and PV
from VG by simply relying on
vgreduce --removemissing --force.
Now, there are two subsequent calls:
lvconvert --repair --use-policies
vgreduce --removemissing
So the VG is locked twice, opening space for all races
between other running lvm processes. If the PV reappears
with old metadata on it (so the winner performs autorepair,
if locking VG for update) the situation is even worse.
Patch simply adds removemissing PV functionality into
lvconcert BUT ONLY if running with --repair and --use-policies
and removing only these empty missing PVs which are
involved in repair.
(This combination is expected to run only from dmeventd.)
