IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When specifying minimum_io_size with --vdosettings,
command assumed wrong unit (sectors).
So '--vdosettings minimum_io_size=512|4096' resulted into
an error that only 512 or 4096 values are allowed, but
at the same time values 1 or 8 were accepted.
So fix by converting any number >= 512 to 'sectors' and
keep input of 1 or 8 still valid if anyone has been using
this before.
So now we take 512 or 4096 and still also 1 or 8 with the
same effect.
Also correct the 'error' message when invalid minimum_io_size
is specified.
(cherry picked from commit 158d3243b6)
The df -a looks at whole system and it returns an error code in case
there's an inaccessible fs which is not even part of the testing environment.
The -a for df is not actually needed here in the lvresize-xfs test, so remove it.
(cherry picked from commit a2ca20dad9)
Fix stripe count and size parameter validation for RAID LVs and
include existing automatic setting of these parameters based
on current shape of the RAID LV in case these are not set
on command line fully.
Previously, this was done only to a certain subset given by this
condition (where the 'stripes' is the '-i|--stripes' cmd line arg
and the 'stripe_size' is actually the '-I|--stripesize' cmd line arg):
!(stripes == 1 || (stripes > 1 && stripe_size))
This condition is a bit harder to follow at first sight and there
are no comments around with explanation for why this one is used,
so let's analyze it a bit more.
First, let's convert this to an equivalent condition (De Morgan law)
so it's easier to read for humans:
stripes != 1 && !(stripes > 1 && stripe_size)
Note: Both stripe and stripesize are unsigned integers, so they can't be negative.
Now, based on that condition, we were running the code to deduce the
stripe/stripesize and do the checks ("the code") only if both of these
are true:
- stripes is different from 1
- we don't have stripes > 1 and stripe_size defined at the same time
But this is not correct in all cases, because:
A) if someone uses stripes = 0, then "the code" is executed
(correct)
B) if someone uses stripes = 1, then "the code" is not executed
(wrong: we still need to be able to check the args against
existing RAID LV stripes whether it matches)
- if someone uses stripes > 1, then "the code" is:
C) if stripe_size = 0, executed
(correct)
D) if stripe_size > 0, not executed
(wrong: we still want to check against existing RAID LV stripes)
Current issues with this condition:
The B) ends up with segfault.
❯ lvextend -i 1 -l+1 vg/lvol0
Rounding size 4.00 MiB (1 extents) up to stripe boundary size 8.00 MiB (2 extents).
Segmentation fault (core dumped)
The D) ends up with errors like:
❯ lvextend -i 3 -l+1 -I128k vg/lvol0
Rounding size 4.00 MiB (1 extents) up to stripe boundary size 8.00 MiB (2 extents).
Rounding size (4 extents) up to stripe boundary size for segment (5 extents).
Size of logical volume vg/lvol0 changed from 8.00 MiB (2 extents) to 20.00 MiB (5 extents).
LV lvol0: segment 1 with len=5 has inconsistent area_len 3
Couldn't read all logical volumes for volume group vg.
Failed to write VG vg.
Conclusion:
The condition needs to be removed so we always run "the code" to check
given striping args given on command line against existing RAID LV
striping. The reason is that we don't want to allow changing stripe
count for RAID LVs through lvextend and we need to end up with the
error:
"Unable to extend <RAID segment type> segment type with different number of stripes"
(We do support changing the striping by lvconvert's reshaping functionality only).
(cherry picked from commit b5249fa3c2)
get_sizes_lockspace() may not always initilize all passed values
in case the bitfield would not trigger if() path.
So just in case keep the path initilized.
TODO: maybe add INTERNAL_ERROR to get_sizes_lockspace().
When converting a VG to locktype sanlock, a new
lease is allocated for each existing lv. Finding
a new lease location involved searching the lvmlock
LV from the start for an unused location, which
would be very slow with many LVs. Improve this by
starting each search from the last used location.
Fix regression from commit 7f29afdb06
"lvmlockd: configurable sanlock lease sizes on 4K disks"
That change failed to recognize that a running lockspace will not
exist in lvmlockd when converting a local VG to a sanlock VG, i.e.
vgchange --locktype sanlock vgname. When the vgchange attempted
to initialize new lv leases for existing LVs, lvmlockd would
return an error when it found no lockspace.
When searching for committed LV by uuid, this search can
be expensive for commands like 'vgremove' - so for
this part introduce 'lv_uuids' radix_tree that is
build with first access to lv_committed().
Since there is a group of commands that need to access 'lv_list'
while still need to search for LV by its name, make the whole
struct lv_list a member of logical_volume structure.
This makes it easy to return also 'lv_list' this list this LV
within VG.
Also the patch should not use more memory, since we were allocating
lv_list for each LV anyway when linkin LV to VG.
Since find_lv_by_name() is now using radix_tree(),
use the same 'search for /' in LV in name for both
find_lv() & find_lv_in_vg().
TODO: Possibly refactor code and use only dm_list
instead of lv_list and dereference LV with container_of()
(thus saving pointer within struct logical_volume) - but
we use 'lv_list' currently in many places...
Add lvm.conf config/validate_metadata configurable setting.
Allows to disable validation of volume_group structure before
writing to disk.
Call of vg_validate() is supposed to catch any inconsistency
of in-memory volume group structure and possibly early aborting
commnand before making any more 'damage' in case the VG struct
is found insistent after some metadata manipulation.
This is almost always useful for devel - and also for normal user
as for small metadata size this doesn't add too much overhead.
However if the volume_group size is large and operations are just
adding removing simple LVs - this validation time may add noticable
to final command running time.
So if the user seeks the highest perfomance of command and does
not do any 'complex' metadata manipulation - it's reasonably safe
to disable validation (with the use of setting "none") here.
With presence of uniq_insert, use this function also
here for extra protection and check for duplicate lv_name
when inserting a new name into radix_tree.
Avoid config 'grep' with actual 'randomly' generated path name
which may eventually contain 'cc' as part the path and
causing a mismatch of the grep test.
When 'lvresize -r' is used to resize the volume, it's valid to
resize even to the same size of an LV, as the command then runs
fs-resize utility to eventually upsize the fs to the current
volume size.
Return code of such command then reflects the return value
of this fs-resize tool.
This fixes the regression introduced when the support
for option --fs was added (2.03.17).
