IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the thin pool has disabled zeroing (created with -Zn), we at least
clear initial 4KiB of such thin volume (provisions 1st block).
If lvcreate is executed with '-an' command will abort (same way like we for
normal LV - however for normal LV option -Zn may skip clearing completely,
for thin volumes this option is not supported (applies only for pools).
The OpenAIS checkpoint library is going away; therefore, cmirrord must
operate without it. The algorithms the handle the timing of when to send
a checkpoint, the determination of what to send, and which ongoing cluster
requests are relevent with respect to the checkpoints are unaffected. We
need only replace the functions that actually perform the storing/transmitting
and retrieving/receiving of the checkpoint data. Rather than store the
checkpoint data in an OpenAIS checkpoint file, we simply transmit it along
with the message that notifies the incoming node that the checkpoint is
ready.
Using report_type_t for bitmask is not correct, since we have not defined types
for all bit combinations - so switching to unsigned type, since values of
report_type_t enum are unsigned.
Make sure both hash tables are initialized before _read_sections() call.
Presents no functional change (since PV scan phase was not adding LV hashes),
but makes the code easier to handle mem failing case, and static analyzer is
hapier as well.
Adding at least stack traces with some FIXMEs for cases,
where we might want to do something cleaver - maybe fail command
or give user hints something is not going well ?
For remote_backup is stack probably 'good' enough for now.
We cannot do anything better here anyway - we are already in logging function,
so just ignore this issue here - it will most likely stop application later.
The code fail to account for the case where we just need a single device
in a RAID 4/5/6 array. There is no good way to tell the allocation functions
that we don't need parity devices when we are allocating just a single device.
So, I've used a bit of a hack. If we are allocating an area_count that is <=
the parity count, then we can assume we are simply allocating a replacement
device (i.e. no need to include parity devices in the calculations). This
should make sense in most cases. If we need to allocate replacement devices
due to failure (or moving), we will never allocate more than the parity count;
or we would cause the array to become unusable. If we are creating a new device,
we should always create more stripes than parity devices.
Read lvm.conf setting for monitoring for each command. So we should not
activate monitoring if the default compilation is set to monitor during
lvconvert commnads.
Patch also removes check for clustered VG and allows to disable monitoring
for clustered VG with the assumption, the problem with monitoring and dmeventd
flag passing for INGNORE is already fixed.
It was not possible to pass down the DM_[FORCE|NO]SYNC flags to
'dm_tree_node_add_raid_target'. This meant that converting to 'raid1' from
'mirror' would cause a full resync. (It also meant that '--nosync' was
ineffective when creating a 'raid1' LV.)
I've taken the 'reserved' parameter in 'dm_tree_node_add_raid_target' and
used it for the "flags" parameter. Now it is possible to pass the sync
flags and any other flags that may come up.
Commit 02f6f4902f introduced a bug that caused
RAID devices to fail to activate if the device for a single sub-LV failed.
The special case of LVM mirror was handled, but not LVM RAID.
EXAMPLE:
[root@bp-01 ~]# devices vg
LV Copy% Devices
lv 100.00 lv_rimage_0(0),lv_rimage_1(0)
[lv_rimage_0] /dev/sde1(1)
[lv_rimage_1] /dev/sdh1(1)
[lv_rmeta_0] /dev/sde1(0)
[lv_rmeta_1] /dev/sdh1(0)
[root@bp-01 ~]# vgchange -an vg
0 logical volume(s) in volume group "vg" now active
[root@bp-01 ~]# off.sh sdh
Turning off sdh
[root@bp-01 ~]# vgchange -ay vg --partial
Partial mode. Incomplete logical volumes will be processed.
Couldn't find device with uuid fbI0YO-GX7x-firU-Vy5o-vzwx-vAKZ-feRxfF.
Cannot activate vg/lv_rimage_1: all segments missing.
0 logical volume(s) in volume group "vg" now active
AFTER this patch:
[root@bp-01 ~]# vgchange -ay vg --partial
Partial mode. Incomplete logical volumes will be processed.
Couldn't find device with uuid fbI0YO-GX7x-firU-Vy5o-vzwx-vAKZ-feRxfF.
1 logical volume(s) in volume group "vg" now active
[root@bp-01 ~]# devices vg
Couldn't find device with uuid fbI0YO-GX7x-firU-Vy5o-vzwx-vAKZ-feRxfF.
LV Copy% Devices
lv 100.00 lv_rimage_0(0),lv_rimage_1(0)
[lv_rimage_0] /dev/sde1(1)
[lv_rimage_1] unknown device(1)
[lv_rmeta_0] /dev/sde1(0)
[lv_rmeta_1] unknown device(0)
[root@bp-01 ~]# dmsetup table vg-lv; dmsetup status vg-lv
0 1024000 raid raid1 3 0 region_size 1024 2 253:2 253:3 - -
0 1024000 raid raid1 2 AD 1024000/1024000
No WHATSNEW update necessary because this is an intrarelease fix.
brassow
Move commod code to destroy orphan VG into free_orphan_vg() function.
Use orphan vgmem for creation of PV lists.
Remove some free_pv_fid() calls (FIXME: check all of them)
FIXME: Check whether we could merge release_vg back again for all VGs.
label_exit() is called destroy_toolcontext() and we are now
using standard dm_list function for destroy, we have to make sure
dm_list gets initialized properly.
As atoi may return negative value - test for both limits.
Test log_args for limits before calling alloca().
Code from dmeventd mirror plugin should probably share same code as
we have in mirrored.c.
Since the function dev_close() has code path, which really could close
file (for unlocked vg) and destroy dev handler, stay on safe side and move
the close few lines later, even our current use case shouldn't trigger
such scenario.
Count number of error and existing areas and if there is no existing area
for the LV avoid its activation.
Always disable partial activatio for thin volumes.
For mirrors currently put in hack to let it pass with a special name
since current mirror code needs to activate such LV during some operations.
For reading % of mapped size of thin volume use as origin for
old style snapshot '-real' device needs to be queried.
Fix log_error report given for lvs -a in this case.
Before removing thin pool LV always make sure, stacked message
for previous run are cleared - but allow to remove any
device that should have been created
(i.e. creation of snapshot failed - so the message for snapshot creation
may be replaced with delete message within unfinished transaction).
Also commit messages after lv remove - so free space is released in pool.
Extend the usage of origin_only flag to allow resume of thin pool LV
(when it's active) to pass only the messages.
origin_only flag will skip detection of already resumed tree for thin_pool,
so we do not need to suspend the tree and we just send messages.
Pass in the origin_only flag also for thin volumes - but curently the flag
is not used to its best.
FIXME: achieve the state where only thin volume snapshot origin is
suspended without its childrens - let's explore whether this may
happen automatically inside libdm (might be generic for other targets).
So the code would not need to annotate the node for this.
Extend lv_activate_opts with bool flag to know for which purpose
dtree is created - and add message only for activation tree
(since that's the only place that may send them).
Extend validation check for thin snapshot creation and test whether
active snapshot origin is suspended before its snapshot is created
(useful in recover scenarios) - in this case also detect, whether
transaction has been already completed and avoid such suspend check
failure in that case.
Add pool_has_message and use it in attach_pool_message.
Also update header to make more obvious which segment type is
expected as parameter.
Rename 'read_only' to 'no_update' (no auto update transaction_id)
to better fit how it's used.
Fix problem when there was only one stacked message replaced with delete
message that caused unwanted transaction_id increase.
Failure to do so results in "Performing unsafe table load while X device(s) are
known to be suspended" errors. While fixing the problem in this way works and
is consistent with the way the mirror segment type does it, it would be nice
to find a solution that uses the generic suspend/resume calls.
Also included in this check-in are additions to the test suite that perform
conversions on RAID LVs under a snapshot. These tests are disabled for the
time being due to a kernel bug that is yet to be tracked down.
Similar to the "mirror" segment type's log device, _add_dev_to_dtree should
be called and not _add_lv_to_dtree when adding metadata sub-LVs to the deptree.
Since _add_lv_to_dtree was being called, 'origin_only' could be set if a
snapshot sits on top of the RAID device. This would cause the actual device
that needed to be added to be skipped in favor of the non-existant device,
"<foo>-real".
Reformat name and path how the LV is represented with lvm1 compatible option,
to switch to the old way - which had number of problem - i.e. many links
do not exist - since for private devices we are not creating them.
Add more info about thin pools and volumes.
Since striped name function knows when to report 'linear' instead of
'stripe' type name - drop it from this place.
This fixes problem when reporting segtype e.g. for thin-pool which
is also using area_count=1 to store thin data device reference.
It also returns properly strduped memory instead of badly casted const char*.
This patch to the suspend code - like the similar change for resume -
queries the lock mode of a cluster volume and records whether it is active
exclusively. This is necessary for suspend due to the possibility of
preloading targets. Failure to check to exclusivity causes the cluster target
of an exclusively activated mirror to be used when converting - rather than
the single machine target.
Since snapshot needs to suspend origin - it might lead to pool userspace
deadlock (as the pool will wait for new space in case it would be overfilled,
but dmeventd would not be able to resize it, as the lvcreate operation would
have kept the VG lock.)
To minimize the risk of such scenario - we prevent to create new snapshot
in case we are over the threshold - but beware, there is still small timewindow,
so keep threshold at some reasonable level!
New field Data% is able to display info about
thin_pool, thin, snapshot and has generic meaning here.
Simple Time/Host field are here to display host and time creation.
Basic support to keep info when the LV was created.
Host and time is stored into LV mda section.
FIXME: Current version doesn't support configurable string via lvm.conf
and used fixed version strftime "%Y-%m-%d %T %z".
This value returns percentage of 'mapped' size compared with total LV size.
(Without passed seg pointer it return highest mapped size - but it's
not used yet.)
LVM- prefix.
Try harder not to leave stray empty devices around (locally or remotely) when
reverting changes after failures while there are inactive tables.
Since the !(dev->flags & DEV_REGULAR) code path just called
dev_name_confirmed() which has just called 'stat()' inside,
remove duplicate second stat() call here.
When both path have identical prefix i.e. /dev/disk/by-id
skip 2 x lstat() for /dev /dev/disk /dev/disk/by-id
and directly lstat() only different part of the path.
Reduces amount of lstat calls on system with lots of devices.
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume. The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group. The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
Also, don't allow a splitmirror operation on a RAID LV that is already tracking
a split, unless the operation is to stop the tracking and complete the split.
Example:
~> lvconvert --splitmirrors 1 --trackchanges vg/lv /dev/sdc1
# Now tracking changes - image can be merged back or split-off for good
~> lvconvert --splitmirrors 1 -n new_name vg/lv /dev/sdc1
# ^ Completes split ^
If a split is performed on a RAID that is tracking an already split image and
PVs are provided, we must ensure that
1) the already split LV is represented in the PVs
2) we are careful to split only the tracked image
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
LVM metadata knows only of striped segments - not linear ones.
The activation code detects segments with a single stripe and switches
them to use the linear target.
If the new lvm.conf setting is set to 0 (e.g. in a test script), this
'optimisation' is turned off.
Remove FIXMES - there should not be any pool free call since
the memory pool is from device manager, and pool is detroyed
after the operation, so doing extra free here would not help here.
However lv_has_target_type() is using cmd mempool so here the extra
call for dm_pool_free makes sence.
"result_independent_of_operands: ((dev->dev & 0xfff00UL) >> 8) ==
18446744073709551615UL /* -1 */ is always false regardless of the values
of its operands (logical operand of if)."
'dev->dev' is set in dev-cache.c _insert() and it's not expectable
st_rdev would have '-1'
This code has been introduced with drbd support commit and code never
worked - so eliminated.
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.
Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
For write we do not need to hold memory locked.
This relaxes many conditions and avoid problems when allocating
a lot of memory for writting metadata buffers.
(In case of huge MDA size this would lead to mismatch between
locked and unlocked memory region size).
Add also internal check we are not writing in critical section.
Removal of an inactive origin removes also all related snapshots.
When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.
lvremove -f will skip the prompt.
Update region_size only for mirror and raid targets.
This fixes warning messages when vg is using small
extent size like 1KiB and no mirror/raid is created,
but the user still got the message:
$> vgcreate -s 1K vg <pvs>
$> lvcreate -L10K vg
Using reduced mirror region size of 4 sectors
Since we support snapshots of thin volumes, we could have more layers,
so we have to check whether tpool layer is going to be inserted.
As the _add_segment_to_dtree() is the only place that adds tpool
segment, we may just check pointer (no strcmp for layer).
Switch to use seg_is_ function instead of lv_is_.
When a PV label write is deferred to a vg_write call (as introduced by a patch
in 2.02.86), the PV is flagged with the internal UNLABELLED_PV flag. However,
when calling vg_archive before vg_write, we still have the PV labelled with the
UNLABELLED_PV flag which was not recognised as a proper flag while exporting
VG metadata:
# vgcreate vg /dev/sda
No physical volume label read from /dev/sda
Metadata inconsistency: Not all flags successfully exported.
Metadata inconsistency: Not all flags successfully exported.
Writing physical volume data to disk "/dev/sda"
Physical volume "/dev/sda" successfully created
Volume group "vg" successfully created
Remove DM_THIN_ERROR_DEVICE_ID from API.
Remove API warning.
Drop code that was using DM_THIN_ERROR_DEVICE_ID (already commented)
Remove debug message which slipped in through some previous commit.
Add filter which tries to check if scanned device is part
of active multipath.
Firstly, only SCSI major number devices are handled in filter.
Then it checks if device has exactly one holder (in sysfs) and
if it is device-mapper device and DM-UUID is prefixed by "MPATH-".
If so, this device is filtered out.
The whole filter can be switched off by setting
mpath_component_detection in lvm.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=597010
Signed-off-by: Milan Broz <mbroz@redhat.com>
If the extent_size is smaller then the chunk_size we may try
to find better aligment (wasting less space).
i.e. using 4KB extent_size and 64KB chunk size will
lead to creation of 64KB aligned thin volume.
Support allocation of metadata from the same PV, if the VG
is build only from one PV.
As thinp is not mirror - we do not require 2 PVs
for basic thin usage as user is losing only perfomance.
Replace detach_pool_messages with update_pool_lv.
Move creation code from to 'if' condition into 1.
Ensure creation has finished all previous message operations.
Let's put the overlay device over real thin pool device.
So we can get the proper locking on cluster.
Overwise the pool LV would be activate once implicitely
and in other case explicitely, confusing locking mechanism.
This patch make the activation of pool LV independent on
activation of thin LV since they will both implicitely use
real -thin pool device.
All thins are created with the next activation and VG is updated
without messages. Only some basic commands works.
(i.e. lvcreate -an -V10 -T mvg/pool)
There can be some combination to confuse this system.
This functionality for snapshots is going to be interesting.
If something fails during creation of thin LV remove such LV
and deactivate in case it's been already tried to activate
(i.e. thin kernel driver fails for some reason.)
To ensure we properly handle LV cluster locking - explicitely do
not allow to change the availability of the thin pool that is in use
for some thin LV.
As soon as the thin volume is created the only way to activate pool
is via implicit dependency.
Ignore thinpool open count for lv/vgchange operations.
Before adding a new virtual segment to LV, check first whether
the last segment isn't already of the same type. In this case
extend last segment instead of creating the new one.
Thin volumes should have always only 1 virtual segment, but it
helps also to virtual snapshot or error segtype..
Git commit ID 0864378250 was meant to disallow
'mirrored' logs for cluster mirrors. However, when add_mirror_log is used
to create the log (as is now the case when using 'lvcreate' or converting only
the log) the check is bypassed.
This patch adds the check to add_mirror_log.
pvck prints 'extra' character from the label since there is no '\0'
after the struct label entry and just uint64_t follows directly.
So avoid it by limiting 8 chars to be printed.
https://www.redhat.com/archives/lvm-devel/2011-January/msg00109.html
Signed-off-by: Paul Bolle <pebolle tiscali nl>
Since thin is not able to use _lv_insert_empty_sublvs,
remove its appearence from this function.
Start to use extend_pool() function for desired functionality
and modify lv_extend() for this.
Code in _lv_insert_empty_sublvs was not able to provide proper
initialization order for thin pool LV.
New function extend_pool() first adds metadata segment to pool LV which
is still visible. Such LV is activate and cleared.
Then new meta LV is created and metadata segments are moved there.
Now the preallocated pool data segment is attached to the pool LV
and layer _tpool is created. Finaly segment is marked as thin_pool.
This function could be useful for other _manip source files.
Use dm_list manipulation function for provided functionality,
which make the code more readable and avoid touching list
internal details here.
This was the intended behaviour, as described in the lvchange man page, so you
have complete control through volume_list in lvm.conf, but the code seems to
have been treating -ae as local-only for a very long time.
Couple FIXMEs put into the code for parts of the code which may be
improved later, since we might be able to add 'lazy' device creation later.
For now require exclusive activation.
