IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Switch to allocate buffer from heap, since it might be potentially
bigger when extremaly large set of volumes would be monitored.
In case of allocation failure send ENOMEM message.
Also implicitelly ignore msg->size when msg->data is NULL.
When the last entry in the timeout queue is unregistered,
wakeup sleeping condition, so the thread is deleted earlier.
So the thread resource is release earlier.
Also when monitored with tools like valgrind this eliminites reported
leak.
Individual events are handled through separate threads,
so once we have more then a single thread in this eventwait
sleeping, we got race on the dm_log setting, since
if one event is timeout out on alarm, while another is still waiting,
then dm log has been restored to NULL and the next sigalarm
has been reported as error.
Fix it by introducing counter which is protected via mutex,
and only when the last event is released, logging is restored.
TODO: libdm seems to have some static vars which may audit
for this type of use.
The DM_EVENT_GET_PARAMETERS requests the parameters under which
the running dmeventd is run and the it sends them to caller.
The parameters sent:
- the pid of the running dmeventd
- foreground state
- exec_method (currently either "direct" or "systemd")
The exact message sent back:
pid=<pid> daemon=<no/yes> exec_method=<direct/systemd>
Trying to restart dmeventd as a reload action is causing problems
under systemd environment. The systemd loses track of new dmeventd
this way. See also https://bugzilla.redhat.com/show_bug.cgi?id=1060134
for more info.
We need to call dmeventd -R directly instead of "systemctl reload dm-event.service"
that was used before (the reload is aimed at configuration reload anyway,
not stateful restart of the daemon - we did this before just because
there's no ExecRestart in systemd and there's only ExecStart and
ExecStop with which we'd lose the state).
Also, use ExecStart="dmeventd -f" to run dmeventd in foreground
(and let's rely on systemd to daemonize it) and change the
service type from "forking" to "simple".
The PIE and RELRO compiler/linker options can be used to produce a code
some techniques applied that makes the code more immune to some attacks:
- PIE (Position Independent Executable). It can make use of the ASLR
(Address Space Layout Randomization) provided by kernel to avoid
static locations for .text regions of executables (this is the 'pie'
compiler and linker option)
- RELRO (Relocation Read-Only). This prevents overwrite attacks of
the GOT (Global Offset Table) and PLT (Procedure Lookup Table)
used for relocations by making it read-only after all relocations
are resolved (these are the 'relro' and 'now' linker options) -
hence all symbols are resolved at the very start so there's no
need for those tables to be writeable later.
These compiler/linker options are now used by default for daemons
if the compiler/linker supports it.
Failures in the temporary mirror used when up-converting cause dmeventd
to issue 'lvconvert --repair' on the sub-LV, <lv_name>_mimagetmp_?. The
'lvconvert' command refuses to deal with this sub-LV outright - it
expects to be given the name of the top-level LV. So, just like we do
with mirrored logs, we strip-off the portion of the name that is not
the top-level LV and issue the command on the top-level LV instead.
When creating a timeout thread for snapshots, the thread is not
tracked and thus never joined. This means that the exit status
of the timeout thread is held indefinitely. Saves a bit of
memory to set PTHREAD_CREATE_DETACHED when creating this thread.
I've also added pthread_attr_init|destroy to setup the creation
pthread_attr_t.
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Start separating the validation from the action in the basic lvresize
code moved to the library.
Remove incorrect use of command line error codes from lvresize library
functions. Move errors.h to tools directory to reinforce this,
exporting public versions of the error codes in lvm2cmd.h for dmeventd
plugins to use.
Instead of calling syslog() from signal event handler,
run all logging code in the main loop.
Also it needs to take the lock and check for list
only when really needed.
Switch to use libdm dm_get_status_snapshot() function for
reading status info.
This fixes bug, where the code was using 32bit integers,
while the snapshot target is able to return 64bit sizes.
However this also means, someone is using >1TB snapshot
cow devices, which is actually very bad idea anyway, since the
perfomance and memory usage in this case is very bad.
Sharing char* with field has a problem in error path,
when we allocate event, but fail to allocate timeout string.
Instead of creating complicated error paths to resolve
it individually stop using unions, and let the resource
to be released in a simple _free_message().
On glibc, those are erroneously (namespace pollution) pulled in via
other headers. this doesn't work with conformant libcs (musl libc in
this case), we simply need to include all needed headers.
Signed-Off-By: John Spencer <maillist-lvm@barfooze.de>
For reseting locale environment into significantly less memory
consuming version 'C' - use LC_ALL instead of LANG since it has
higher priority in locale settings.
Otherwise we may observe whole locale-archive which might be
over 100MB on i.e. Fedora systems locked in memory with
some daemons.
Reset counter after thin pool resize failure.
If the pool goes above threshold, support unmounting
of all thin volumes if the lvextend fails to avoid
overfilling of the pool.
There were several hard-coded values for run directory around the code.
Also, some tools are DM specific only, others are LVM specific and there
was no distinction made here before. With this patch applied, we have
this cleaned up a bit (subsystem in brackets, defaults in parentheses):
[common] configurable PID_DIR (/var/run)
lvm [lvm] configurable RUN_DIR (/var/run/lvm)
configurable locking dir (/var/lock/lvm)
clvmd [lvm] configurable pid file (PID_DIR/clvmd.pid)
socket (RUN_DIR/clvmd.sock)
lvmetad [lvm] configurable pid file (PID_DIR/lvmetad.pid)
socket (RUN_DIR/lvmetad.socket)
dm [dm] configurable DM_RUN_DIR (/var/run)
cmirrord [dm] configurable pid file (PID_DIR/cmirrord.pid)
dmeventd [dm] configurable pid file (PID_DIR/dmeventd.pid)
server fifo (DM_RUN_DIR/dmeventd-server)
client fifo (DM_RUN_DIR/dmeventd-client)
The changes briefly:
- added configure --with-default-pid-dir
- added configure --with-default-dm-run-dir
- added configure --with-lvmetad-pidfile
- by default, using one common pid directory for everything
(only lvmetad was not following this before)
In some occasional case dmevent restart was experiencing problems
with obtaining pid lockfile. So this patch tries to send several more kill
message until daemon kills itself so there is would reponse.
With this small loop the restart seems to work reliable,
although the loopsize and usleep are just randomly picked for now.
various dmeventd plug-ins into a new function called 'dmeventd_lvm2_command',
but the new function did not strip off the "_mlog" extentions that the
mirror plug-in had been doing. This created bug 794904 - failure to replace
devices in a redundant log.
The test suite did catch this scenario because it performs repair tests (mainly)
through the CLI and not dmeventd. It's also not easy to test because the test
itself will hang if the bug is encountered.
LISTEN_PID and LISTEN_FDS environment variables are defined only during systemd
"start" action. But we still need to know whether we're activated during
"reload" action as well - we use the reload action to call "dmeventd -R"/"lvmetad -R"
for statefull daemon restart. We can't use normal "restart" as that is simply
composed of "stop" and "start" and we would lose any state the daemon has.
As atoi may return negative value - test for both limits.
Test log_args for limits before calling alloca().
Code from dmeventd mirror plugin should probably share same code as
we have in mirrored.c.
For snapshot, prepare whole command in front into private buffer.
Add also some missing '\n' for syslog messages.
For raid and mirror only convert creation of command line string.
This should avoid any unbound growth of mempool for dm_split_names.
Fix some minor outstading issue from thin plugin introduction -
Call dmeventd_lvm2_exit() in failpath for registration.
Add some missing '\n' in syslog messages.
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume. The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group. The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
udev may also need to be disabled if you didn't build it statically too.
dmeventd.static could be fixed with some more work but I don't really see the
point: without dlopen() it's useless, and if you have dlopen(), why not support
normal shared libraries too?
monitoring state of the logical volumes they are currently acting on.
Until now, every time a logical volume has been changed by a dmeventd plugin,
this plugin would have called back to dmeventd through the external FIFO
mechanism. I am fairly sure this was superfluous, inefficient and possibly even
dangerous.
Systemd preloads file descriptors for us and passes them in for
newly spawned daemon when using on-demand fifo (or socket)
based activation.
This patch adds checks for file descriptors preloaded by
systemd and uses them instead of opening the FIFOs again
to properly support on-demand FIFO-based activation.
(We'll change FIFOs to sockets soon - but still this
part of the code will stay almost the same.)
The filename to adjust the oom score was changed in 2.6.36.
We should use oom_score_adj instead of oom_adj (which is still
there under /proc, but it's scheduled for removal in August 2012).
New oom_score_adj uses a range from -1000 (OOM_SCORE_ADJ_MIN,
disable oom killing) to 1000 (OOM_SCORE_ADJ_MAX).
- returned char not needed to be explicitly const
- warn if pipe() fails in clvmd (more fixes here needed for error paths...)
- assign (and ignore) read() output in drain buffer
Variable 'ret' assigned from _do_event() was actually not used and replaced with next
assignment without any read of the returned value.
Code is reformated - so the error path is put in the if() branch and normal
code is put after the 'if' together with FIXME comment.
FIXME lowprio: logging needs to be fixed in this code,
- multiple log_errors are printed, stacks are missing...
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.
We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
We cast (char*) to (uint32_t*) that changes alignment requierements.
For our case the code has been correct as alloca() returns properly
aligned buffer, however this patch make it cleaner and more readable
and avoids warning generation.
to lvm.conf in the activation section: 'snapshot_autoextend_threshold' and
'snapshot_autoextend_percent', that define how to handle automatic snapshot
extension. The former defines when the snapshot should be extended: when its
space usage exceeds this many percent. The latter defines how much extra space
should be allocated for the snapshot, in percent of its current size.
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
Target install_dm_plugin installs files to libdir/device-mapper.
Target install_lvm2_plugin installs files to libdir/lvm2.
Both targets creates relative links to libdir to keep the code
compatible with current dlopen handling.
Once we will be able to read plugins from subdir, links
could be removed.
Internally, we used DM names instead of UUIDs while processing event
handlers. This caused problems while trying to vgrename a VG with active LVs
where the names are being changed and so the devices were not found then.
The patch also contains a little bit of refactoring, moving "build_dlid" code
found in dev_manager.c to "build_dm_uuid", now in lvm-string.c (so we have
build_dm_uuid and build_dm_name at one place).
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
If dmeventd runs with -d flag, it doesn't fork into backgroud.
The command kill(getppid(), SIGTERM) attempts to kill the parent dmeventd
process, however, if there is no parent, it kills whatever process spawned
dmeventd. In case of debugging with gdb, the parent is gdb, thus
kill(getppid(), SIGTERM) kills the debugger.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If the error path of _register_for_event() calls _free_thread_status()
_lib_put() call is missing.
To make thing simpler move this _lib_put() into common error path code.
As the header file <sys/mman.h> was not included in dmeventd.c
thus missed definition of MCL_CURRENT so this patch only makes
it obvious we were not locking memory here.
This patch has no functional change.
Later part of this patch set handles mlockall() via memlock_inc_daemon().
in clvmd, dmevend, man, tests.
Don't include dependency files for clow and cscope.out targets
Improve dependency tracking for dmeventd and liblvm2cmd sources.
to obtain sources. Create make.tmpl target for
simplier generation of cflow files with the help of
CFLOW_LIST, CFLOW_LIST_TARGET, CFLOW_TARGET.
Still cflow usage is not perfect.
This check-in enables the 'mirrored' log type. It can be specified
by using the '--mirrorlog' option as follows:
#> lvcreate -m1 --mirrorlog mirrored -L 5G -n lv vg
I've also included a couple updates to the testsuite. These updates
include tests for the new log type, and some fixes to some of the
*lvconvert* tests.
For static builds dependency for SELinux libs is not handled by 'ar'.
Till better solution is found, for static builds STATIC_LIBS is used.
Patch updates SELinux detection to use 3rd & 4th parameter for Success/Fail.
Also removes detection of pthread from this check as we know which
version of libdevmapper we are going to link with lvm after merge.
SELinux header check moved to the SELinux test code.
Create new substituted variable PTHREAD_LIBS and link this library
only with tools/libs which really needs it - i.e. dmeventd.
Check for libpthread only for builds with clvmd or dmeventd.
Remove variable LIB_PTHREAD
